R-1802

MEAS STATOR RTD Temperature Sensor  Variety of Configurations  Single and Dual Elements  Custom Designs Available with: » Specific Dimensions » Side Exit » Paddle Style » High Accuracy » Special Cable or Leadwires The Stator RTD Sensor is a rectangular, flat, laminated sensors commonly called “Stator Sticks” because they are inserted between the coils in the stator of a motor. These averaging type sensors are used in electric motors and generators for continuous sensing of the temperature and provide for consistent thermal monitoring without false alarms. Many sizes are in stock or we can customize for your application. Our Stator RTD sensors are built to meet the specifications of ANSI C50.10-1990, general requirements for synchronous motors. We can build to your specifications! Features  Rear Exit, Epoxy Glass Laminated  Elements, Single and Dual: » Platinum, Copper, Nickel  Custom Body Thickness: .030” to .375” » Standard: .030”, .050”, .078”, .093”, .125”  Custom Body Widths: .250” to 2.50” » Standard: .260”, .305”, .344”, .455”, .500”, .625”  Leadwire/Cable Options Applications  Industrial  Electric Motors  Generators TESS-ANDO-408-0000052 REV A SENSOR SOLUTIONS /// MEAS STATOR RTD Page 1 MEAS STATOR RTD Temperature Sensor Performance Specifications Dielectric Strength: Class F: 3,000 volts RMS @ 60 Hz for 1 minute, between leads and external body surface Class H: 2,000 volts RMS @ 60 Hz for 1 minute, between leads and external body surface Temperature Limits: Class F: 155°C (311°F) Class H: 180°C (356°F) RTD Leadwires: Two Wire, Three Wire or Four Wire Standard: Stranded Copper plated wire with PTFE insulation Other leadwire coverings available Dimensions TESS-ANDO-408-0000052 REV A SENSOR SOLUTIONS /// MEAS STATOR RTD Page 2 MEAS STATOR RTD Temperature Sensor Ordering Information STATOR RTD SENSOR, REAR EXIT Model Classification Temperature Limit Material 300F Class F 300H Class H Model Element Epoxy Glass 3,000 Volts Epoxy Glass 2,000 Volts Temperature Coefficient P2B P2C P2D G2C C1D N3C Model 155°C 180°C Accuracy Platinum 100 Ohm ±.12% at 0°C Platinum 100 Ohm ±.5% at 0°C Platinum 100 Ohm ±.2% at 0°C Platinum 100 Ohm ±.5% at 0°C Copper 10 Ohm ±.2% at 25°C Nickel 120 Ohm ±.5% at 0°C 'L' Body Length Define 'L' Length in Inches Example: 10.00 = 10.00”; 6.25 = 6.25” Model Leadwires, Element Configuration Dielectric Strength .00385 .00385 .00385 .00392 .00427 .00672 ---- STOCKED PART NUMBERS* Part Number Model Number R-8203 R-8204 R-8205 R-7119 R-1802 R-8949-34 R-5156 R-7124 R-7123 R-10256-23 300H C1D 10.00 3S H 180 A 300H P2C 10.00 3S H 180 A 300H N3C 10.00 3S H 180 A 300H P2C 10.00 3S C 180 B 300H C1D 10.00 3S C 036 B 300F G2C 11.00 3S B 096 C 300F G2C 12.00 3S B 096 C 300H C1D 6.00 3S H 180 A 300H N3C 6.00 3S H 180 A 300H P2C 10.00 3D A 096 E * Please consult factory for availability. Color Code 2S 3S 4S 3D Model Two Wire, Single Three Wire, Single Four Wire, Single Three Wire, Dual 'T' Body Thickness A B C D E F G H Model .030" 30 AWG .050" 26 AWG .078" 22 AWG .093" 22 AWG .125" 22 AWG .093" 22 AWG, Jacketed Cable .125" 22 AWG, Jacketed Cable .030” 26 AWG (0.050” Thick at Lead Exit) 'Y' Leadwire/Cable Options Red/White Red/White/White Red/Red/White/White Red/White/White // Blue/Yellow/Yellow Standard Leadwires ---Define 'Y' Length in Whole Inches (120 = 120.0"; 036 = 36.0”) Model 'W' Body Width A B C D E F .260" (Single Element Only) .305" (Single Element Only) .344" (Single Element Only) .455" (Single Element Only) .500" .625" NORTH AMERICA EUROPE ASIA Measurement Specialties, Inc., a TE Connectivity Company Tel: 800-522-6752 customercare.ando@te.com Measurement Specialties (Europe), Ltd., a TE Connectivity Company Tel: 800-440-5100 customercare.tlse@te.com Measurement Specialties (China), Ltd., a TE Connectivity Company Tel: 0400-820-6015 customercare.chdu@te.com te.com/sensorsolutions Measurement Specialties, Inc., a TE Connectivity company. Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2016 TE Connectivity Ltd. family of companies TESS-ANDO-408-0000052 REV A All Rights Reserved. SENSOR SOLUTIONS /// MEAS STATOR RTD Page 3