R-8575-7

Fittings–Adjustable Spring Loaded Quick Release, Dual Threads Quick Release, Single Thread Fluid Sealed Fittings–Adjustable Spring Loaded use spring loading pressure to hold probe sensors in place against the bearing surface for temperature monitoring. These fittings feature quick release knobs for easy adjustments and fast installation in a variety of motors and generators. In addition, they can also be used in other applications that require fluid or pressure sealing. FEATURES • Fluid Sealed • Spring Loaded APPLICATIONS • Motors • Generators • Process • HVAC dimensions Quick Release, Dual Threads, Standard Process Thread Quick Release, Single Thread 1/8" NPT Control Thread Quick Release Knob Quick Release Knob ‘D’ ‘D’ (2.50") (2.50") (1.00") (1.00") Quick Release, Dual Threads (For Use With Transmitters) Process Thread Control Thread Quick Release Knob ‘D’ (2.50") Fittings–Adjustable Spring Loaded / Rev 1.1 1711 139th Lane NW Andover, MN 55304 (.25") ‘D’ = Inside Diameter www.meas-spec.com +1 800.899.9783 01/06/2015 temp.eng.us@meas-spec.com Fittings–Adjustable Spring Loaded performance specifications Fitting Construction: Stainless Steel for corrosion resistance Installation Instructions Quick Release Knob Fluid Sealing: Standard with Viton O-rings for fluid or pressure sealing Pressure Rating: Fluid seals havea maximum pressure rating of 50 psi Step 1: Pull release knob and rotate half turn clockwise to lock open Quick Release Knob In Open Position Step 2: Slide sensor into fitting to desired immersion length Quick Release Knob Closed and Spring Loaded Step 3: Pull release knob, rotate half turn counter-clockwise and release The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. ordering info Fitting–Adjustable Spring Loaded Model 695A 695F 695G Model 1 2 3 Model B C D Style Quick Release, Dual Threads, Standard (For Use with Connection Heads) Quick Release, Single Thread, 1/8” NPT Only Quick Release, Dual Threads (For Use with Transmitters) Process Thread Control Thread 1/2" NPT (Standard) 1/2” NPT 1/2" NPT 3/4” NPT 1/8" NPT ---‘D’ Inside Diameter 0.188” 0.215” 0.250” Fittings–Adjustable Spring Loaded / Rev 1.1 1711 139th Lane NW Andover, MN 55304 www.meas-spec.com +1 800.899.9783 01/06/2015 temp.eng.us@meas-spec.com