RP73PF1E4K02BTDF

SMD High Power Precision Resistors Type RP73 Series Key Features High precision Tolerance down to 0.05% and TCR down to 5PPM Power rating to 1.0W Up to 200V DC operating voltage Terminal finish – electroplated 100% matte Sn Applications Communications The RP73 resistor series is a stable thin film chip resistor range offering increased power dissipation, higher temperature capabilities and increased working voltages compared to the standard RN73 series. The resistor is produced by sputtering a metal film onto high grade alumina and protecting with three complete printed layers. Values are normally offered in E96 and E24 series. The RP73 resistor has accurate and uniform physical dimensions to reduce placement problems. Industrial Controls Instrumentation Medical Electrical Characteristics RP73 series Rated Power @ 70°C Resistance Min range Ω Max Tolerance (%) Code Letter TCR (PPM / °C) Code Letter Selection series Max. operating voltage Max overload voltage Operating temperature range Insulation resistance Stability 0402 0.063W 49R9 4K99 5 A 1773272 CIS WR 02/2017 49R9 12K 0.05 A 10 15 25 C D F 50 G 49R9 4K99 49R9 60K 5 A 10 C 49R9 10R 69K8 255K 0.1 B 15 25 50 D F G E24 & E96 49R9 4K99 49R9 60K 5 A 10 C 49R9 69K8 0.5 / 1 D/F 15 D 4R7 511K 25 F 50 G 25V 50V -55 ~ +155°C >1000MΩ 0.5% Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD High Power Precision Resistors Rated Power @ 70°C Resistance Min range Ω Max Tolerance (%) Code Letter TCR (PPM / °C) Code Letter Selection series Max. operating voltage Max overload voltage Operating temperature range Insulation resistance Stability Rated Power @ 70°C Resistance Min range Ω Max Tolerance (%) Code Letter TCR (PPM / °C) Code Letter Selection series Max. operating voltage Max overload voltage Operating temperature range Insulation resistance Stability Rated Power @ 70°C Resistance Min range Ω Max Tolerance (%) Code Letter TCR (PPM / °C) Code Letter Selection series Max. operating voltage Max overload voltage Operating temperature range Insulation resistance Stability 0603 0.1W 24R9 15K 5 A 4R7 332K 0.05 A 10 15 25 C D F 24R9 15K 50 G 5 A 4R7 4R7 332K 1M0 0.1 B 10 15 25 50 C D F G E24 & E96 24R9 15K 5 A 4R7 332K 0.5 / 1 D/F 10 15 C D 4R7 1M0 24R9 30K 4R7 511K 5 A 10 C 4R7 1M0 0.5 / 1 D/F 15 D 25 F 50 G 10 C 4R7 1M0 0.5 / 1 D/F 15 25 D F 50 G 25 F 50 G 75V 150V -55 ~ +155°C >1000MΩ 0.5% 0805 0.125W 24R9 30K 5 A 4R7 511K 0.05 A 10 15 25 C D F 50 G 24R9 30K 4R7 511K 5 A 10 C 4R7 4R7 1M0 1M0 0.1 B 15 25 50 D F G E24 & E96 1R0 1M0 150V 300V -55 ~ +155°C >1000MΩ 0.5% 1206 0.25W 24R9 49K9 5 A 1773272 CIS WR 02/2017 4R7 1M0 0.05 A 10 15 25 C D F 24R9 49K9 50 G 5 A 4R7 1M0 10 C 0.1 B 15 25 D F E24 & E96 24R9 49K9 50 G 5 A 200V 400V -55 ~ +155°C >1000MΩ 0.5% Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD High Power Precision Resistors Rated Power @ 70°C Resistance Min range Ω Max Tolerance (%) Code Letter TCR (PPM / °C) Code Letter Selection series Max. operating voltage Max overload voltage Operating temperature range Insulation resistance Stability Rated Power @ 70°C Resistance Min range Ω Max Tolerance (%) Code Letter TCR (PPM / °C) Code Letter Selection series Max. operating voltage Max overload voltage Operating temperature range Insulation resistance Stability 1210 0.33W 24R9 49K9 5 A 4R7 1M0 0.05 A 10 15 25 C D F 24R9 49K9 50 G 5 A 4R7 1M0 10 C 0.1 B 15 25 D F E24 & E96 24R9 49K9 50 G 5 A 10 C 4R7 1M0 0.5 / 1 D/F 15 25 D F 50 G 10 C 4R7 1M0 0.5 / 1 D/F 15 25 D F 50 G 200V 400V -55 ~ +155°C >1000MΩ 0.5% 2010 0.33W 24R9 49K9 5 A Rated Power @ 70°C Resistance Min range Ω Max Tolerance (%) Code Letter TCR (PPM / °C) Code Letter Selection series Max. operating voltage Max overload voltage Operating temperature range Insulation resistance Stability 4R7 1M0 0.05 A 10 15 25 C D F 24R9 49K9 50 G 5 A 4R7 1M0 10 C 0.1 B 15 25 D F E24 & E96 24R9 49K9 50 G 5 A 200V 400V -55 ~ +155°C >1000MΩ 0.5% 4R7 100R 0.1 B 25 50 F G 2512 1.0W 1R0 100R 0.5 D 25 50 F G E24 & E96 200V 400V -55 ~ +155°C >1000MΩ 0.5% 25 F 1R0 100R 1.0 F 50 G Operating Voltage=√(P*R) or Max. operating voltage listed above, whichever is lower. Overload Voltage=2.5*√(P*R) or Max. overload voltage listed above, whichever is lower. 1773272 CIS WR 02/2017 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD High Power Precision Resistors Electrical Characteristics RP73P series – High Power Rated Power @ 70°C Resistance Min range Ω Max Tolerance (%) Code Letter TCR (PPM / °C) Code Letter Selection series Max. operating voltage Max overload voltage Operating temperature range Insulation resistance Stability Rated Power @ 70°C Resistance Min range Ω Max Tolerance (%) Code Letter TCR (PPM / °C) Code Letter Selection series Max. operating voltage Max overload voltage Operating temperature range Insulation resistance Stability Rated Power @ 70°C Resistance Min range Ω Max Tolerance (%) Code Letter TCR (PPM / °C) Code Letter Selection series Max. operating voltage Max overload voltage Operating temperature range Insulation resistance Stability Rated Power @ 70°C Resistance Min range Ω Max Tolerance (%) Code Letter TCR (PPM / °C) Code Letter Selection series Max. operating voltage Max overload voltage Operating temperature range Insulation resistance Stability 1773272 CIS WR 02/2017 10R 255K 0.1 B 25 50 F G 10R 332K 0.1 B 25 50 F G 10R 499K 0.1 B 25 50 F G 10R 1M0 0.1 B 25 50 F G Dimensions in millimetres unless otherwise specified 0402 0.1W 4R7 255K 0.5 D 25 50 F G E24 & E96 50V 100V -55 ~ +155°C >1000MΩ 0.5% 0603 0.166W 10R 332K 0.5 D 25 50 F G E24 & E96 100V 150V -55 ~ +155°C >1000MΩ 0.5% 0805 0.25W 10R 499K 0.5 D 25 50 F G E24 & E96 150V 300V -55 ~ +155°C >1000MΩ 0.5% 1206 0.33W 10R 1M0 0.5 D 25 50 F G E24 & E96 200V 400V -55 ~ +155°C >1000MΩ 0.5% 4R7 255K 1.0 F 25 50 F G 10R 332K 1.0 F 25 50 F G 10R 499K 1.0 F 25 50 F G 10R 1M0 1.0 F 25 50 F G Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD High Power Precision Resistors Operating Voltage=√(P*R) or Max. operating voltage listed above, whichever is lower. Overload Voltage=2.5*√(P*R) or Max. overload voltage listed above, whichever is lower. Environmental Characteristics Item Temperature Coefficient of Resistance (TCR) Requirement Tol. ≤0.05% TOL. >0.05% As per TCRs specified in Electrical Characteristics tables ΔR±0.2% Short Time Overload MIL-STD-202 Method 304 +25/-55/+25/+125/+25°C JIS-C-5201-1 5.5 RCWV*2.5 or Max. overload voltage whichever is lower for 5 seconds MIL-STD-202 Method 302 Apply 100VDC for 1 minute MIL-STD-202 Method 108A 70±2°C, RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF” MIL-STD-202 Method 103B 40±2°C, 90~95% R.H. RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF” JIS-C-5201-1 6.1.4 Bending amplitude 3 mm for 10 seconds MIL-STD-202 Method 208H 245±5°C for 3 seconds MIL-STD-202 Method 210E 260±5°C for 10 seconds MIL-STD-202 Method 301 Max. overload voltage for 1 minute MIL-STD-202 Method 107G -55°C ~150°C, 100 cycles JIS-C-5201-1 7.1 1 hour, -65°C, followed by 45 minutes of RCWV ΔR±0.2% Insulation Resistance >1000 MΩ Endurance ΔR±0.5% Damp Heat with Load ΔR±0.5% ΔR±0.5% Bending Strength ΔR±0.05% ΔR±0.2% Solderability Test Method 95% min. coverage Resistance to Soldering Heat Dielectric Withstand Voltage ΔR±0.05% ΔR±0.2% By Type Thermal Shock ΔR±0.05% ΔR±0.25% Low Temperature Operation ΔR±0.5% ΔR±0.5% Storage Temperature: 25±3°C; Humidity < 80%RH Derating Curve Derating Curve Power ratio(%) . 100 80 60 40 20 0 0 20 40 60 80 100 120 140 160 180 Ambient Temperature(℃) For resistors operated in ambient temperatures above 70°C, power rating must be derated in accordance with this curve 1773272 CIS WR 02/2017 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD High Power Precision Resistors Construction and dimensions L D1 W     T  D2    Alumina Substrate  Edge Electrode (NiCr)  Resistor Layer (NiCr)  Bottom Electrode (Ag)  Top Electrode ( Ag)  Barrier Layer (Ni)  External Electrode (Sn)  Overcoat (Epoxy)  Marking Size L (mm) W (mm) T (mm) D1 (mm) D2 (mm) 0402 0603 0805 1206 1210 2010 2512 1.00±0.05 1.55±0.10 2.00±0.15 3.05±0.15 3.10±0.15 4.90±0.15 6.30±0.15 0.50±0.05 0.80±0.10 1.25±0.15 1.55±0.15 2.40±0.15 2.40±0.15 3.10±0.15 0.30±0.05 0.45±0.10 0.55±0.10 0.55±0.10 0.55±0.10 0.55±0.10 0.55±0.10 0.20±0.10 0.30±0.20 0.30±0.20 0.42±0.20 0.40±0.20 0.60±0.30 0.60±0.30 0.20±0.10 0.30±0.20 0.40±0.20 0.35±0.25 0.55±0.25 0.50±0.25 0.50±0.25 Weight (g) (1000 Pcs.) 0.54 1.83 4.71 9.02 10 23.61 38.06 Suggested PCB Layout Plan Size 0402 0603 0805 1206 1210 2010 2512 1773272 CIS WR 02/2017 Recommended Land Pattern A B 0.50 0.50 0.80 1.00 1.00 1.00 2.00 1.15 2.00 1.15 3.60 1.40 4.90 1.60 Dimensions in millimetres unless otherwise specified C 0.60±0.2 0.90±0.2 1.35±0.2 1.70±0.2 2.50±0.2 2.50±0.2 3.10±0.2 Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD High Power Precision Resistors Marking Case sizes 0805 to 2512 IEC 4 Digit Marking: Resistance Code 100R (100Ω) 1000 2K2 (2.2kΩ) 2201 10K (10kΩ) 1002 499K (499kΩ) 4992 100K (100kΩ) 1003 Case Size 0603 E24 3 digit marking – Example 101 = 100R 102=1K0 E24 10 33 11 36 12 39 13 43 15 47 16 51 18 56 20 62 22 68 24 75 27 82 30 91 Case size 0603 E96 3 digit marking – Examples 14C = 13K7 68B = 4K99 68X = 49R9 Code 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Code Multiplier E96 100 102 105 107 110 113 115 118 121 124 127 130 133 137 140 143 147 150 154 158 162 165 169 174 A 10⁰ B 10¹ Code 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 C 10² E96 178 182 187 191 196 200 205 210 215 221 226 232 237 243 249 255 261 267 274 280 287 294 301 309 D 10³ E 10⁴ Code 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 F 10⁵ E96 316 324 332 340 348 357 365 374 383 392 402 412 422 432 442 453 464 475 487 499 511 523 536 549 G 10⁶ H 10⁷ Code 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 X 10⁻¹ E96 562 576 590 604 619 634 649 665 681 698 715 732 750 768 787 806 825 845 866 887 909 931 953 976 Y 10⁻² Z 10⁻³ NB for 0603 size values other than E24 and E96 will be supplied unmarked Case sizes smaller than 0603 will be supplied unmarked 1773272 CIS WR 02/2017 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD High Power Precision Resistors Packaging Packing Quantity and Reel Specification Size 0402 0603 0805 1206 1210 2010 2512 ØA ±1.0 178.0 ØB ±1.0 60.0 ØC ±0.7 W ±1.0 T ±1.0 Paper Tape Embossed Plastic Tape 9.5 11.5 1000 / 5000 N/A 13.5 15.5 N/A 4000 13.5 Paper tape Specification Size A ±0.05 B ±0.05 0402 0.70 1.16 0603 1.10 1.90 0805 1206 1210 1.60 2.00 2.75 2.37 3.55 3.40 1773272 CIS WR 02/2017 W ±0.10 E ±0.05 F ±0.05 P₀ P₁ P₂ ±0.05 ØD₀ 2.00 ±0.05 8.00 1.75 3.5 4.00 ±0.10 4.00 ±0.10 4.00 ±0.05 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change 2.00 1.55 ±0.05 1.60 ±0.10 T 0.40 ±0.03 0.60 ±0.03 0.75 ±0.05 For Email, phone or live chat, go to: www.te.com/help SMD High Power Precision Resistors Peel force of top cover tape The peel speed shall be about 300mm/min±5% The peel force of top cover tape shall be between 8gf to 60gf Embossed Plastic Tape Specifications Top Tape ψ D0 E A F B W ψ D1 1.4Min. T P1 Resistor P2 P0 direction of unreeling Emboss Tape Type A B W E F P0 P1 P2 ØD0 T 2010 2.85±0.10 5.45±0.10 12.0±0.10 1.75±0.10 5.5±0.05 4.00±0.05 4.00±0.10 2.00±0.05 1.50+0.10 1.00±0.20 2512 3.40±0.10 6.65±0.10 12.0±0.10 1.75±0.10 5.5±0.05 4.00±0.05 4.00±0.10 2.00±0.05 1.50+0.10 1.00±0.20 Peel force of top cover tape The peel speed shall be about 300mm/min±5% The peel force of top cover tape shall be between 20gf to 80g 1773272 CIS WR 02/2017 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD High Power Precision Resistors Reflow Solder Profile Reel dimension (mm) Time of Reflow soldering at maximum temperature point 260°C = 10s Wave Solder Profile Qty / Reel 2000 A ±0.5 2 B ±0.5 13.5 C ±0.5 21 D ±1 60 M ±2 178 W ±1 13.8 Handling Recommendations When flow soldering - the land width must be smaller than the Chip Resistor width to properly control the solder application. Generally, the land width can be Chip Resistor width (W) x 0.7 to 0.8. When reflow soldering – solder Time of Wave amount solderingcan at maximum temperature 10s be set to W x application be adjusted. Thus thepoint land260°C width= can Time of Soldering Iron at maximum temperature point 410°C = 5s 1.0 to 1.3. How To Order How To Order RP73 Common Part RP73 – Standard RP73P – High Power C TCR 3521 2A 100R 1K0 B F TD T Package Value Tolerance Packaging Common Part Resistance Value Tolerance Pack Style Size A -±5ppm/°C 1E - 0402 100R1R0 A - ±0.05% TG – 250 cut tape 1 ohm 1J – 0603 (100Ω) length C - ±10ppm/°C 2A – 0805 B - ±0.1% (1E, 1J, 2A, 2B) 2B – 12061K ohm 1000 1K0 ohms D - ±15PPM3521 2E – 1210 (1000Ω) D - ±0.5% TDFT––1000 reel 1K0 F – 1% 2000 2H – 2010 (1E, 1J, 2A, 2B) J – 5% reel F - ±25PPM 3A - 2512 100K F - ±1.0% (100,000 TD – 5000 reel 1 Meg ohm G - ±50PPM Ω) (1E, 1J, 2A, 2B, 2E) 1000000 ohms 1M0 1773272 CIS WR 02/2017 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change TE – 4000 reel (2H, 3A only For Email, phone or live chat, go to: www.te.com/help