RP73PF1J75RBTDF

SMD High Power Precision Resistors Type RP73 Series Key Features High precision Tolerance down to 0.05% and TCR down to 5PPM Power rating to 1.0W Up to 200V DC operating voltage Terminal finish – electroplated 100% matte Sn The RP73 resistor series is a stable thin film chip resistor range offering increased power dissipation, higher temperature capabilities and increased working voltages compared to the standard RN73 series. The resistor is produced by sputtering a metal film onto high grade alumina and protecting with three complete printed layers. Values are normally offered in E96 and E24 series. The RP73 resistor has accurate and uniform physical dimensions to reduce placement problems. Applications Communications Industrial Controls Electrical Characteristics RP73 series Rated Power @ 70°C Resistance Min range Ω Max Tolerance (%) Code Letter TCR (PPM / °C) Code Letter Selection series Max. operating voltage Max overload voltage Operating temperature range Insulation resistance Stability 0201 0.05W 25 F 1773272 Rev. M 05/2020 5K0 75K 0.1 B 50 G 25 F E24 & E96 5K0 75K 0.5 / 1 D/F 50 G 25V 50V -55 ~ +155°C > MΩ 0.5% Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD High Power Precision Resistors Rated Power @ 70°C Resistance Min range Ω Max Tolerance (%) Code Letter TCR (PPM / °C) Code Letter Selection series Max. operating voltage Max overload voltage Operating temperature range Insulation resistance Stability Rated Power @ 70°C Resistance Min range Ω Max Tolerance (%) Code Letter TCR (PPM / °C) Code Letter Selection series Max. operating voltage Max overload voltage Operating temperature range Insulation resistance Stability Rated Power @ 70°C Resistance Min range Ω Max Tolerance (%) Code Letter TCR (PPM / °C) Code Letter Selection series Max. operating voltage Max overload voltage Operating temperature range Insulation resistance Stability 0402 0.063W 5 A 49R9 20K 0.05 A 10 15 C D 49R9 20K 25 F 50 G 5 A 49R9 4R02 100K 511K 0.1 B 10 15 25 50 C D F G E24 & E96 49R9 20K 49R9 100K 4R02 511K 0.5 / 1 D/F 15 D 5 A 10 C 24R9 60K 4R7 511K 0.5 / 1 D/F 10 15 C D 25 F 50 G 25V 50V -55 ~ +155°C > MΩ 0.5% 0603 0.1W 24R9 60K 5 A 4R7 332K 0.05 A 10 15 25 C D F 24R9 60K 50 G 5 A 4R7 1R0 511K 1M0 0.1 B 10 15 25 50 C D F G E24 & E96 5 A 1R0 1M0 25 F 50 G 75V 150V -55 ~ +155°C > MΩ 0.5% 0805 0.125W 24R9 150K 5 A 1773272 Rev. M 05/2020 4R7 511K 0.05 A 10 15 25 C D F 24R9 150K 50 G 5 A 4R7 1R0 1M0 1M0 0.1 B 10 15 25 50 C D F G E24 & E96 24R9 150K 5 A 4R7 1M0 0.5 / 1 D/F 10 15 C D 1R0 1M0 25 F 50 G 150V 300V -55 ~ +155°C > MΩ 0.5% Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD High Power Precision Resistors Rated Power @ 70°C Resistance Min range Ω Max Tolerance (%) Code Letter TCR (PPM / °C) Code Letter Selection series Max. operating voltage Max overload voltage Operating temperature range Insulation resistance Stability Rated Power @ 70°C Resistance Min range Ω Max Tolerance (%) Code Letter TCR (PPM / °C) Code Letter Selection series Max. operating voltage Max overload voltage Operating temperature range Insulation resistance Stability Rated Power @ 70°C Resistance Min range Ω Max Tolerance (%) Code Letter TCR (PPM / °C) Code Letter Selection series Max. operating voltage Max overload voltage Operating temperature range Insulation resistance Stability 1206 0.25W 24R9 300K 5 A 4R7 1M0 0.05 A 10 15 C D 1R0 1M0 25 F 50 G 24R9 300K 5 A 4R7 1R0 1M0 1M0 0.1 B 10 15 25 50 C D F G E24 & E96 24R9 300K 5 A 4R7 1M0 0.5 / 1 D/F 10 15 C D 1R0 1M0 25 F 50 G 200V 400V -55 ~ +155°C > MΩ 0.5% 1210 0.33W 24R9 300K 5 A 4R7 1M0 0.05 A 10 15 C D 1R0 1M0 25 F 50 G 24R9 300K 5 A 4R7 1R0 1M0 1M0 0.1 B 10 15 25 50 C D F G E24 & E96 24R9 300K 5 A 4R7 1M0 0.5 / 1 D/F 10 15 C D 1R0 1M0 25 F 50 G 200V 400V -55 ~ +155°C > MΩ 0.5% 2010 0.33W 24R9 300 5 A 1773272 Rev. M 05/2020 4R7 1M0 0.05 A 10 15 C D 1R0 1M0 25 F 50 G 24R9 300 5 A 4R7 1R0 1M0 1M0 0.1 B 10 15 25 50 C D F G E24 & E96 24R9 300 5 A 4R7 1M0 0.5 / 1 D/F 10 15 C D 1R0 1M0 25 F 50 G 200V 400V -55 ~ +155°C > MΩ 0.5% Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD High Power Precision Resistors 2512 Rated Power @ 70°C 1.0W 1206 Resistance Min 4R7 1R0 Rated Power @ 0.25W range Ω Max 1M0 1M0 70°C Tolerance 0.11R0 0.5 / 1.0 Resistance(%) Min 24R9 4R7 24R9 4R7 1R0 Code B1M0 D/F rangeLetter Ω Max 300K 1M0 300K 1M0 1M0 TCR (PPM /(%) °C) 10 25 50 10 15 0.1 25 50 Tolerance 0.05 15 Code CA D F G C D FB G Code Letter Letter Selection TCR (PPMseries / °C) 5 10 15 25 50 E24 5 & E96 10 15 25 50 Max. voltage Code operating Letter A C D F G A200V C D F G Max overload 400V Selection seriesvoltage E24 & E96 Operating temperature range -55 ~ +155°C Max. operating 200V Insulation > MΩ voltage resistance Stability 0.5% Max overload 400V voltage Operating temperature -55 ~ +155°C Operating Voltage=√ P*R or Max. operating oltage listed a o e, hi range Insulation > listed MΩ a o e, Oresistance erload Voltage= . *√ P*R or Max. o erload oltage Stability 0.5% Rated Power @ 70°C Resistance Min 24R9 range Ω Max 300K Tolerance (%) Code Letter TCR (PPM / °C) 5 Code Letter Rated Power @ 70°C A Selection series Resistance Min range Ω Max. operating Max voltage Tolerance (%) Max overload Code Letter voltage TCR (PPM / °C) Operating Code Letter temperature range Selection series Insulation Max. operating voltage resistance Max overload voltage Stability Operating temperature range Insulation resistance Stability 24R9 300K 5 A 4R7 1M0 0.5 / 1 D/F 10 15 C D 1R0 1M0 25 F he er is lo er. hi he er is lower. 1210 0.33W Electrical Characteristics RP73P series – High Power 4R7 1M0 0.05 A 10 15 C D Rated Power @ 70°C Resistance Min 4R7 Rated Power @ 70°C 24R9 range Ω Max 300K 1M0 Resistance Min Tolerance 0.05 range Ω (%) Max Code Letter(%) A Tolerance TCR (PPM / °C) 5 10 15 Code Letter Code(PPM Letter A C D TCR / °C) Selection series Code Letter Max. operating Selection series voltage Max. operating voltage Max Max overload overload voltage voltage Operating temperature range Operating Insulation resistance temperature Stability range Insulation resistance Stability 1773272 Rev. M 05/2020 50 G 1R0 1M0 24R9 300K 25 50 5 F G A 49R9 4R7 100K 255K 0.1 B 10 / 15 25 / 50 C/D F/G 4R7 1R0 24R9 4R7 1M0 1M0 300K 1M0 0.1 0.5 / 1 B D/F 10 15 50 5 10 15 0402 25 C D G A C D 0.1W F 49R9E24 & E96 4R7 49R9 4R7 100K 255K 100K 255K 200V 0.5 1.0 D F 400V 10 / 15 25 / 50 10 / 15 25 / 50 C / D -55 ~ +155°C F/G C/D F/G E24 & E96 >50V MΩ 100V 0.5% -55 ~ +155°C > MΩ 0.5% 1R0 1M0 25 F 50 G 2010 0.33W 1R0 24R9 1M010R 300K 332K 0.1 25 50B 5 F 25 G 50A F G Dimensions in millimetres unless otherwise specified 0603 4R7 1R0 0.166W 1M0 1M0 10R 10R 332K 0.1 332K 0.5 B 1.0 10 D 15 25 F 50 25C 50D 25F 50G F GE24 & E96 F G 24R9 300K 5 A 4R7 1M0 0.5 / 1 D/F 10 15 C D 1R0 1M0 25 F 50 G E24 & E96 200V 100V 150V 400V -55 ~ +155°C > MΩ -55 ~ +155°C 0.5% > MΩ 0.5% Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD High Power Precision Resistors Rated Power @ 70°C Resistance Min range Ω Max Tolerance (%) Code Letter TCR (PPM / °C) Code Letter Selection series Max. operating voltage Max overload voltage Operating temperature range Insulation resistance Stability Rated Power @ 70°C Resistance Min range Ω Max Tolerance (%) Code Letter TCR (PPM / °C) Code Letter Selection series Max. operating voltage Max overload voltage Operating temperature range Insulation resistance Stability Rated Power @ 70°C Resistance Min range Ω Max Tolerance (%) Code Letter TCR (PPM / °C) Code Letter Selection series Max. operating voltage Max overload voltage Operating temperature range Insulation resistance Stability 10R 499K 0.1 B 25 50 F G 10R 1M0 0.1 B 25 50 F G 4R7 1M0 0.1 B 25 50 F G 0805 0.25W 10R 499K 0.5 D 25 50 F G E24 & E96 150V 300V -55 ~ +155°C > MΩ 0.5% 1206 0.33W 10R 1M0 0.5 D 25 50 F G E24 & E96 200V 400V -55 ~ +155°C > MΩ 0.5% 2010 0.5W 1R 1M0 0.5 D 25 50 F G E24 & E96 200V 400V -55 ~ +155°C > MΩ 0.5% 10R 499K 1.0 F 25 50 F G 10R 1M0 1.0 F 25 50 F G 1R 1M0 1.0 F 25 50 F G Operating Voltage=√ P*R or Max. operating oltage listed a o e, hi he er is lo er. O erload Voltage= . *√ P*R or Max. o erload oltage listed above, whichever is lower. 1773272 Rev. M 05/2020 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD High Power Precision Resistors Environmental Characteristics Item Temperature Coefficient of Resistance (TCR) Requirement Tol. ≤ . % TOL. >0.05% As per TCRs specified in Electrical Characteristics tables ΔR±0.2% Short Time Overload MIL-STD-202 Method 304 +25/-55/+25/+125/+25°C JIS-C-5201-1 5.5 RCWV*2.5 or Max. overload voltage whichever is lower for 5 seconds MIL-STD-202 Method 302 Apply 100VDC for 1 minute MIL-STD-202 Method 108A 70±2°C, RCWV for 1000 hrs with 1.5 hrs ON and . hrs OFF MIL-STD-202 Method 103B 40±2°C, 90~95% R.H. RCWV for 1000 hrs with 1.5 hrs ON and . hrs OFF JIS-C-5201-1 6.1.4 Bending amplitude 3 mm for 10 seconds MIL-STD-202 Method 208H 245±5°C for 3 seconds MIL-STD-202 Method 210E 260±5°C for 10 seconds MIL-STD-202 Method 301 Max. overload voltage for 1 minute JIS-C-5201-1 4.36 1 hour @-65°C followed by 45 minutes @ RCWV MIL-STD 202 Method 108 155°C for 1000 hours ΔR±0.2% Insulation Resistance > Endurance ΔR±0.5% MΩ Damp Heat with Load ΔR± .5% ΔR± . % Bending Strength ΔR± . ΔR± . % % Solderability Test Method 95% min. coverage Resistance to Soldering Heat Dielectric Withstand Voltage ΔR± . % ΔR± . % By Type Low Temperature Operation ΔR± . High Temperature Exposure ΔR± .5% % RCWV = √ P*R or Max. operating voltage, whichever is lower. Storage Temperature: 15 - 28°C; Humidity < 80%RH Derating Curve Power ratio(%) 100 80 60 40 20 0 0 20 40 60 80 100 120 140 160 180 Ambient Temperature(℃) For resistors operated in ambient temperatures above 70°C, power rating must be derated in accordance with this curve 1773272 Rev. M 05/2020 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD High Power Precision Resistors Construction and dimensions L D1     W T  D2    Alumina Substrate  Edge Electrode (NiCr)  Resistor Layer (NiCr)  Top Electrode ( Ag)  External Electrode (Sn)  Marking  Bottom Electrode (Ag)  Barrier Layer (Ni)  Overcoat (Epoxy) Size L (mm) W (mm) T (mm) D1 (mm) D2 (mm) 0201 0402 0603 0805 1206 1210 2010 0.58±0.05 1.00±0.05 1.55±0.10 2.00±0.15 3.05±0.15 3.10±0.15 4.90±0.15 0.29±0.05 0.50±0.05 0.80±0.10 1.25±0.15 1.55±0.15 2.40±0.15 2.40±0.15 0.23±0.05 0.30±0.05 0.45±0.10 0.55±0.10 0.55±0.10 0.55±0.10 0.55±0.10 0.12±0.05 0.20±0.10 0.30±0.20 0.30±0.20 0.42±0.20 0.40±0.20 0.60±0.30 2512 6.30±0.15 3.10±0.15 0.55±0.10 0.60±0.30 0.15±0.05 0.20±0.10 0.30±0.20 0.40±0.20 0.35±0.25 0.55±0.25 0.50±0.25 (HP 2.20±0.25) 2.50±0.25 Suggested PCB Layout Plan Size 0201 0402 0603 0805 1206 1210 2010 2010 .5W 2512 1773272 Rev. M 05/2020 Dimensions in millimetres unless otherwise specified Recommended Land Pattern A B 0.25 0.30 0.50 0.50 0.80 1.00 1.00 1.00 2.00 1.15 2.00 1.15 3.60 1.40 0.5 2.8 1 3.55 Dimensions Shown for reference purposes only. Specifications subject to change C 0.40±0.2 0.60±0.2 0.90±0.2 1.35±0.2 1.70±0.2 2.50±0.2 2.50±0.2 2.50±0.2 3.10±0.2 For Email, phone or live chat, go to: www.te.com/help Weight (g) (1000 Pcs.) 0.14 0.54 1.83 4.71 9.02 10 23.61 (HP 26.68) 44.65 SMD High Power Precision Resistors Marking Case sizes 0805 to 2512 IEC 4 Digit Marking: R 1000 Resistance Code Ω K . kΩ 2201 K 1002 kΩ 99K 4992 99kΩ K 1003 kΩ Case Size 0603 E24 3 digit marking – Example 101 = 100R 102=1K0 E24 10 33 11 36 12 39 13 43 15 47 16 51 18 56 20 62 22 68 24 75 27 82 30 91 Case size 0603 E96 3 digit marking – Examples 14C = 13K7 68B = 4K99 68X = 49R9 Code 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Code Multiplier E96 100 102 105 107 110 113 115 118 121 124 127 130 133 137 140 143 147 150 154 158 162 165 169 174 A ⁰ B 10¹ Code 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 C 10² E96 178 182 187 191 196 200 205 210 215 221 226 232 237 243 249 255 261 267 274 280 287 294 301 309 D 10³ E Code 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 F E96 316 324 332 340 348 357 365 374 383 392 402 412 422 432 442 453 464 475 487 499 511 523 536 549 G H Code 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 X Y ⁻¹ NB for 0603 size values other than E24 and E96 will be supplied unmarked Case sizes smaller than 0603 will be supplied unmarked 1773272 Rev. M 05/2020 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change E96 562 576 590 604 619 634 649 665 681 698 715 732 750 768 787 806 825 845 866 887 909 931 953 976 For Email, phone or live chat, go to: www.te.com/help Z ⁻ ⁻ SMD High Power Precision Resistors Packaging Packing Quantity and Reel Specification Size 0201 0402 0603 0805 1206 1210 2010 2512 ØA ±1.0 178.0 ØB ±1.0 60.0 ØC ±0.7 W ±1.0 T ±1.0 9.5 11.5 13.5 15.5 N/A P P 13.5 Paper Tape 1000 / 10000 Embossed Plastic Tape N/A 1000 / 5000 4000 Paper tape Specification Size A ±0.05 B ±0.05 0201 0402 0603 0805 1206 1210 0.40 0.70 1.10 1.60 2.00 2.75 0.70 1.16 1.90 2.37 3.55 3.40 1773272 Rev. M 05/2020 Dimensions in millimetres unless otherwise specified W ±0.10 E ±0.05 F ±0.05 P ± . ØD 2.00 ±0.05 8.00 1.75 3.5 4.00 ±0.10 4.00 ±0.10 4.00 ±0.05 Dimensions Shown for reference purposes only. Specifications subject to change 2.00 1.55 ±0.05 T 0.42±0.02 0.40±0.03 0.60±0.03 0.75±0.05 1.60 ±0.10 For Email, phone or live chat, go to: www.te.com/help SMD High Power Precision Resistors Peel force of top cover tape The peel speed shall be about 300mm/min±5% The peel force of top cover tape shall be between 8gf to 60gf Embossed Plastic Tape Specifications Top Tape ψ D0 E A F B W ψ D1 1.4Min. T P1 Resistor P2 P0 direction of unreeling Emboss Tape Type A B W E F P0 P1 P2 ØD0 T 2010 2.85±0.10 5.45±0.10 12.0±0.10 1.75±0.10 5.5±0.05 4.00±0.05 4.00±0.10 2.00±0.05 1.50+0.10 1.00±0.20 2512 3.40±0.10 6.65±0.10 12.0±0.10 1.75±0.10 5.5±0.05 4.00±0.05 4.00±0.10 2.00±0.05 1.50+0.10 1.00±0.20 Peel force of top cover tape The peel speed shall be about 300mm/min±5% The peel force of top cover tape shall be between 20gf to 80g 1773272 Rev. M 05/2020 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD High Power Precision Resistors Reflow Solder Profile Time of Reflow soldering at maximum temperature point 260°C = 10s Wave Solder Profile Time of Wave soldering at maximum temperature point 260°C = 10s Time of Soldering Iron at maximum temperature point 410°C = 5s How To Order RP73 C Common Part RP73 – Standard TCR 2A A -±5ppm/°C C - ±10ppm/°C RP73P – High Power D - ±15PPM F - ±25PPM Package Size 1H – 0201 1E - 0402 1J – 0603 2A – 0805 2B – 1206 2E – 1210 2H – 2010 3A - 2512 G - ±50PPM 100R B TD Value Tolerance Packaging 100R Ω A - ±0.05% TG – 250 cut tape length (1E, 1J, 2A, 2B) B - ±0.1% 1K0 Ω D - ±0.5% 100K (100,000 Ω F - ±1.0% TDF – 1000 reel (1H, 1E, 1J, 2A, 2B) TH – 10000 reel (1H) TD – 5000 reel (1E, 1J, 2A, 2B, 2E) TE – 4000 reel (2H, 3A only 1773272 Rev. M 05/2020 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help