RP7SL024

General Purpose Low Power PCB Relays SCHRACK Special Load PCB Relay RP3SL n 1 pole 16A, 1 form A (NO) contact high inrush currents up to 120A n Mono- or bistable n 4kV/8mm coil-contact n For Typical applications Lighting control, timers, motor control, building automation. Z Coil Data Approvals VDE Cert. No. 40025448 (DC versions only), UL E214024 Coil data, monostable coil Coil voltage range Operative range, IEC 61810 flux proof version wash tight version Technical data of approved types on request. Contact Data Contact arrangement Rated voltage Max. switching voltage Rated current flux proof version wash tight version Limiting making current max. 4 s, duty factor 10 % max. 20 ms (incandescent lamp) Breaking capacity max. flux proof version wash tight version Contact material Frequency of operation, with/without load Operate/release time max., monostable Set/reset time max., bistable Bounce time max. monostable bistable 1 form A (NO) 250VAC 400VAC 2 1 Coil versions, DC coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10%1) mW 005 5 3.8 0.5 54 500 006 6 4.5 0.6 68 500 012 12 9.0 1.2 270 500 024 24 18.0 2.4 11001) 500 048 48 36.0 4.8 44001) 500 060 60 45.0 6.0 65401) 500 16A 12A 25A 120A 4000VA 3000VA AgSnO 960/72000h-1 14/12ms 30/25ms 5/7ms 5/15ms Contact ratings Type Contact Load IEC61810 RP3SL RP7SL 16A, 250VAC resistive, 70°C 12A, 250VAC resistive, 70°C A (NO) A (NO) 5 to 110VDC Cycles Mechanical endurance monostable bistable 50x103 100x103 >20x106 operations >1x106 operations Coil Data, bistable coil 1 coil 2 coils Coil voltage range 5 to 24VDC Operative range, IEC 61810 1 Reset voltage min/max, % of Urtd 70/110% 75/120% Min./Max. energization duration 20ms/1min at < 50%DF Coil versions, bistable Coil Rated Set Reset Reset Coil Rated coil code voltage voltage voltage R1 resistance power VDC VDC VDC Ω/W Ω±10%1) mW Coil versions, bistable 1 coil A05 5 3.7 3.6 39/0.5 21 1250 A12 12 9.0 8.7 220/0.5 115 1250 A24 24 18.0 16.7 820/0.5 460 1250 Coil versions, bistable 2 coils F12 12 9.0 9.0 1051) 1250 F24 24 18.0 18.0 4601) 1250 1) Coil resistance ±15% . All figures are given for coil without pre-energization, at ambient temperature +23°C, duty factor 20%. Other coil voltages on request. 10-2014, Rev. 1014 www.te.com © 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose Low Power PCB Relays SCHRACK Special Load PCB Relay RP3SL (Continued) Insulation Data Initial dielectric strength between open contacts between contact and coil Clearance/creepage between contact and coil Material group of insulation parts Tracking index of relay base Circuit scheme for bistable 1 coil 2000Vrms 4000Vrms ≥8/8mm IIIa PTI250V Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature flux proof version -40 to +70°C wash tight version -40 to +35°C Category of environmental protection IEC 61810 RTII - flux proof, RTIII - wash tight Vibration resistance (functional), form A contact 20g Shock resistance (destructive) 100g Terminal type PCB-THT Mounting distance, 12A/16A 0mm/≥3mm Weight 18g Resistance to soldering heat THT, IEC 60068-2-20 flux proof version 270°C/10s wash tight version 260°C/5s Packaging/unit monostable and bistable 1coil version tube/20 pcs., box/500 pcs. bistable 2coil version tray/25 pcs., box/100 pcs. PCB layout / terminal assignment Bottom view on solder pins Bistable versions: Indicated contact position during or after coil energization with reset voltage. 2-coil versions: Operate A2, A3 Reset A1, A3 b) for 2 coil version only Dimensions 2 10-2014, Rev. 1014 www.te.com © 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. General Purpose Low Power PCB Relays SCHRACK Special Load PCB Relay RP3SL (Continued) Product code structure Typical product code Type RP Special Load PCB Relay RP ​3 ​SL Version 3 Flux proof Contact configuration ​/ ​contact material SL 1 form A contact (1 NO), AgSnO2 Coil Coil code: please refer to coil versions table Product code Version 7 Wash tight Contact material Coil version RP3SL005 1 form A (NO) contact AgSnO DC coil RP3SL012 16A RP3SL018 flux proof RP3SL024 RP3SL048 RP3SL060 RP3SLA06 Bistable 1 coil RP3SLA24 RP3SLF12 Bistable 2 coils This list represents the most common types and does not show all variants covered by this datasheet. Other types on request. 10-2014, Rev. 1014 www.te.com © 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. RP 3 SL 012 Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Coil 5VDC 12VDC 18VDC 24VDC 48VDC 60VDC 6VDC 24VDC 12VDC Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Part number 1393230-7 1393230-9 1-1393230-0 1-1393230-1 1-1393230-2 1-1393230-3 1393230-2 1393230-4 1393230-5 Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. 3