SMD THIN FILM PRECISION RESISTORS
- AEC-Q200 COMPLIANT
TYPE RQ73 SERIES
INTRODUCTION
TE Connectivity (TE) is proud to introduce this automotive grade
thin film precision chip resistor, a sister to our highly successful
RN73 range. The resistors are constructed in a high grade raw
materials and laser trimmed to give precise tolerance figures.
This, coupled with the tight TCR and anti-corrosive protection
layer gives us a range of resistors which are ideal not just for
automotive applications, but also for medical equipment,
measuring instruments and industrial applications.
FEATURES
•
SMD TaN thin film resistor
•
Special passivation layer on resistive element
•
AEC-Q200 qualified
•
Sulfur resistant
•
RoHS Compliant
CHARACTERISTICS – ELECTRICAL
Type
RQ73 1E
RQ73 1J
RQ73 2A
RQ73 2B
Size
0402
0603
0805
1206
10R ~ 350K
10R ~1M0
Resistance tolerance
Resistance Range
±0.1%
40R ~ 35K
40R ~ 130K
0.0625W
0.166W
0.2W
0.5W
Max. Working Voltage (DC or RMS)¹ ²
50V
75V
100V
200V
Max. Overload Voltage (DC or RMS)
100V
150V
200V
400V
TCR (ppm/°C)
Power rating @ 85°C
±10PPM/°C
Operating Temperature
-55 ~ 155°C
Notes:
1.
This is the maximum voltage that may be continuously supplied to the resistor element, see “IEC publication 60115-8”
2.
Max. Operation Voltage : So called RCWV (Rated Continuous Working Voltage) is determined by
RCWV = √(Rated Power x Resistance Value) or Max. RCWV listed above, whichever is lower.
SMD Thin Film Precision Resistors - AEC-Q200 Compliant
Type RQ73 series
CONSTRUCTION
DIMENSIONS (Unit:mm)
Type
RQ73 1E
RQ73 1J
RQ73 2A
RQ73 2B
L
1.00 ± 0.05
1.55 ± 0.10
2.00 ± 0.15
3.05 ± 0.15
W
0.50 ± 0.05
0.80 ± 0.10
1.25 ± 0.15
1.55 ± 0.15
A
0.20 ± 0.10
0.30 ± 0.20
0.30 ± 0.20
0.42 ± 0.20
B
0.20 ± 0.10
0.30 ± 0.20
0.40 ± 0.20
0.35 ± 0.25
t
0.30 ± 0.05
0.45 ± 0.10
0.55 ± 0.10
0.55 ± 0.10
RQ73 1E
RQ73 1J
RQ73 2A
RQ73 2B
A
0.50
0.80
1.00
2.00
B
0.50
1.00
1.00
1.15
C
0.60 ± 0.2
0.90 ± 0.2
1.35 ± 0.2
1.70 ± 0.2
RECOMMENDED LAND PATTERN
Type
INDUSTRIAL / SMD THIN FILM PRECISION RESISTORS - AEC-Q200 COMPLIANT
2
SMD Thin Film Precision Resistors - AEC-Q200 Compliant
Type RQ73 series
DERATING CURVE
100
Power ratio (%)
80
60
40
20
0
0
20
40
60
80
100
120
140
160
180
Ambient Temperature (OC)
SINGLE PULSE
CONTINUOUS PULSE
INDUSTRIAL / SMD THIN FILM PRECISION RESISTORS - AEC-Q200 COMPLIANT
3
SMD Thin Film Precision Resistors - AEC-Q200 Compliant
Type RQ73 series
ENVIRONMENTAL CHARACTERISTICS
Test
Procedure
Requirement
JIS-C-5201-1 4.8
IEC-60115-1 4.8
-55°C~+125°C, 25°C is the reference temperature
As Spec.
Short time
overload
JIS-C-5201-1 4.13
RCWV*2.5 or Max. overload voltage
whichever is lower for 5 seconds
ΔR±0.1%
Insulation
Resistance
JIS-C-5201-1 4.6
IEC-60115-1 4.6
Apply 100VDC for 1 minute
>1000 MΩ
Resistance to
soldering heat
JIS-C-5201-1 4.18
IEC-60115-1 4.18
260±5°Cfor 10 seconds
ΔR±0.1%
Solderability
JIS-C-5201-1 4.17
IEC-60115-1 4.17
245±5°C for 3 seconds
95% min. coverage
Temperature
Cycling
JESD22 Method JA-104
-55°C to +125°C, 1000cycles
-55°C to +155°C, 1000cycles
Temperature
Coefficient of
Resistance (T.C.R.)
ΔR±0.1%for 125⁰C
ΔR±0.2%for 155⁰C
MIL-STD-202 Method 103
1000 hrs 85°C/85%RH 10% of operating power.
ΔR±0.1%
IEC60115-1 4.25
1000 +48/-0 hours, loaded with RCWV or Vmax in chamber
controller 85 ±2ºC, 1.5 hours on and 0.5 hours off
ΔR±0.1%
MIL-STD-202 Method 108
Condition D Steady State TA=125°C at derated power.
Measurement at 24±4 hours after test conclusion.
ΔR±0.1%
MIL-STD-202 Method 108
at +155°C for 1000 hrs
ΔR±0.15%
Moisture
Resistance
MIL-STD-202 Method106
65±2°C, 80~100% RH, 10 cycles, 24 hours/cycle
ΔR±0.1%
Mechanical Shock
MIL-STD-202 Method 213
Wave Form: Tolerance for half sine shock pulse.
Peak value is 100g’s. Normal duration(D) is 6.
ΔR±0.1%
MIL-STD-202 Method 204
5 g’s for 20 min., 12 cycles each of 3 orientations,
10-2000 Hz
ΔR±0.1%
Terminal strength
AEC-Q200-006
Force of 1kg for 60 seconds.
No Damage
Board flex
JIS-C-5201-1 4.33
Bending 2mm for 60seconds
ΔR±0.1%
AEC-Q200-002
Human body model
RQ0402, RQ0603 0.2KV classification level 1A
RQ0805, RQ1206 1KV
classification level 1C
ΔR±0.1%
MIL-STD-202 Method 215
Add Aqueous wash chemical - OKEM Clean or
equivalent. Do not use banned solvents.
Marking Unsmeared
Bias Humidity
Load Life
Operational Life
High Temperature
Exposure
Vibration
ESD
Resistance to
solvents
INDUSTRIAL / SMD THIN FILM PRECISION RESISTORS - AEC-Q200 COMPLIANT
4
SMD Thin Film Precision Resistors - AEC-Q200 Compliant
Type RQ73 series
ENVIRONMENTAL CHARACTERISTICS
Test
Procedure
Requirement
UL-94
V-0 or V-1 are acceptable. Electrical test not required.
No ignition of the tissue paper or
scorching or the pinewood board
Sulfur Test
EIA-977 (conditions B)
105±2°C no power rating for 750 hrs
ΔR±1%
Endurance
IEC60115-1 4.25
1000 =48/-0 hours, loaded with RCWV or Vmax in chamber
controller 85 ±2°C, 1.5 hours on and 0.5 hours off
ΔR±0.1%
Flammability
MARKING
0603 E24 series 3 Digits – first two digits denote significant figures of resistance and third digit denotes number of zeros thereafter.
EG
222
=
2K2
0603 E96 series 3 Digits - The 1st two digit codes are referring to the CODE in the table, the 3rd code is the index of resistance
value :
Y=10-2, X=10-1, A=10⁰, B=10¹, C=10², D=10³, E=10⁴, F=10⁵
EX : 17.8Ω=25X, 178Ω=25A, 1K78 =25B
17K8=25C, 178K=25D, 1M78=25E
Code R_value Code R_value Code R_value Code R_value Code R_value Code R_value Code R_value Code R_value
1
100
13
133
25
178
37
237
49
316
61
422
73
562
85
750
2
102
14
137
26
182
38
243
50
324
62
432
74
576
86
768
3
105
15
140
27
187
39
249
51
332
63
442
75
590
87
787
4
107
16
143
28
191
40
255
52
340
64
453
76
604
88
806
5
110
17
147
29
196
41
261
53
34B
65
464
77
619
89
825
6
113
18
150
30
200
42
267
54
357
66
475
78
634
90
845
7
115
19
154
31
205
43
274
55
365
67
487
79
649
91
866
8
118
20
158
32
210
44
280
56
374
68
499
80
665
92
887
9
121
21
162
33
215
45
287
57
383
69
511
81
681
93
909
10
124
22
165
34
221
46
294
58
392
70
523
82
698
94
931
11
127
23
169
35
226
47
301
59
402
71
536
83
715
95
953
12
130
24
174
36
232
48
309
60
412
72
549
84
732
96
976
0805 & 1206 E24 and E96 4 digits – Where value is below 100R use R as decimal, otherwise three significant figures plus number of
following zeros.
EG:
Resistance
10Ω
12Ω
100Ω
6K8
47K
4 digit marking
10R0
12R0
1000
6801
4702
Notes:
1.
No marking for non-E24/E96 resistance values.
2.
No marking for 0402 size resistors
INDUSTRIAL / SMD THIN FILM PRECISION RESISTORS - AEC-Q200 COMPLIANT
5
SMD Thin Film Precision Resistors - AEC-Q200 Compliant
Type RQ73 series
PACKAGING
Reel Dimensions (mm)
ØA
178.0 ±1.0
ØB
ØC
W
T
QTY
60.0 +1.0
13.5 ±0.7
9.5 ±1.0
11.5 ±1.0
1000 / 5000
Paper Tape Specification (mm)
A
B
W
E
F
P₀
P₁
P₂
ØD₀
T
0402
0.70
±0.05
1.16
±0.05
8.00
±0.10
1.75
±0.05
3.5
±0.05
4.00
±0.10
2.00
±0.05
2.00
±0.05
1.55
±0.05
0.40
±0.03
0603
1.10
±0.05
1.90
±0.05
8.00
±0.10
1.75
±0.05
3.5
±0.05
4.00
±0.10
4.00
±0.10
2.00
±0.05
1.55
±0.05
0.60
±0.03
0805
1.60
±0.05
2.37
±0.05
8.00
±0.10
1.75
±0.05
3.5
±0.05
4.00
±0.10
4.00
±0.10
2.00
±0.05
1.55
±0.05
0.75
±0.05
1206
2.00
±0.05
3.55
±0.05
8.00
±0.10
1.75
±0.05
3.5
±0.05
4.00
±0.10
4.00
±0.10
2.00
±0.05
1.55
±0.05
0.75
±0.05
• Peel force of top cover tape
• The peel speed shall be about 300mm/min±5%
• The peel force of top cover tape shall be between 8gf to 60gf
INDUSTRIAL / SMD THIN FILM PRECISION RESISTORS - AEC-Q200 COMPLIANT
6
SMD Thin Film Precision Resistors - AEC-Q200 Compliant
Type RQ73 series
STORAGE AND HANDLING CONDITION: MSL 1
1.
Products are recommended to be used up within two years of manufacturing date. Check solderability in case shelf life
extension is needed.
2.
To store products with following condition: Temperature : 15 to 28⁰C Humidity : < 80% relative humidity
3.
Caution:
a.
Don’t store products in a corrosive environment such as sulfide, chloride gas, or acid. It may cause oxidation of
electrode, which easily be resulted in poor soldering.
b.
To store products on the shelf and avoid exposure to moisture.
c.
Don’t expose products to excessive shock, vibration, direct sunlight etc.
SOLDERING PROFILE
1.
Time of IR reflow soldering at maximum temperature point 260°C : 10s
2.
Time of wave soldering at maximum temperature point 260°C : 10s
3.
Time of soldering iron at maximum temperature point 410°c : 5s
INDUSTRIAL / SMD THIN FILM PRECISION RESISTORS - AEC-Q200 COMPLIANT
7
ORDERING INFORMATION
Part Number
RQ73
C1E
40R2
B
TDF
Common Part
RQ73 Common Part
TCR
C
10PPM/°C
Size Code
1E
0402
1J
0603
2A
0805
2B
1206
Resistance Value
1 ohm
100R (100Ω)
1K ohm
1K0 (1000Ω)
100K ohm
100K (100,000Ω)
Tolerance
B
.1%
te.com
©2023 TE Connectivity. All Rights Reserved.
TE Connectivity, TE connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks
of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other
representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any changes to the information contained herein
without prior notice. TE Connectivity assumes only those obligations set forth in the terms and conditions for this product and shall in no event be liable for any incidental,
indirect, or consequential damages arising out of the sale, resale, use, or misapplication of the product. TE expressly disclaims any implied warranties with respect to the
information contained herein, including, but not limited to, implied warranties of merchantability or fitness for a particular purpose. Dimensions, specifications and/or information
contained herein are for reference purposes only and are subject to change without notice. Consult TE for the latest dimensions, specifications and/or information. Users of TE
Connectivity products must make their own assessment as to whether the respective product is suitable for the respective desired application.
1773270-2
Rev B1
10/23
ED
INDUSTRIAL / SMD THIN FILM PRECISION RESISTORS - AEC-Q200 COMPLIANT
