RR03J680RTR

Power Resistor Type RR Series Key Features ■ Metal film technology ■ Non-flammable ■ High power in small package ■ High stability, reliability and uniformity characteristics ■ Good performance for pulse applications ■ Defined interruption behavior (fusing time) ■ Various forming styles The RR Series is manufactured by depositing a homogeneous film of metal alloy onto a high-grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting wires of electrolytic copper are welded to the end-caps. The resistors are coated with a red, non-flammable lacquer, which provides electrical, mechanical and climatic protection. The coating is resistant to all cleaning solvents in accordance with MIL-STD-202, method 215 and IEC 60068-2-45. Characteristics Electrical RR01 RR02 0.22Ω-1MΩ 10R - 1M0 0.33Ω-1MΩ 10R - 1M0 0.33Ω-1MΩ 10R - 1M0 Tolerance and Series: ±5%, E24 Maximum Dissipation: at Tamb. = 70°C Thermal Resistance: Limiting Voltage (DC or RMS): ±1%, E24/E96 ±5%, E24 ±1%, E24/E96 ±5%, E24 2W 3W 120k/W 80k/W 65k/W 350V 500V 750V Pn x R Temperature Coefficient: ±300ppm/°C Basic Specification: IEC 60115-1 and 60115-4 Climatic Category (IEC 60068): Stability ∆R/R Max. After: 55/155/56 For tolerance 5% For tolerance 1% Load ±5.0% +0.1Ω ±1.0% +0.1Ω Climatic Tests ±3.0% +0.1Ω ±1.0% +0.1Ω Resistance to Soldering Heat ±1.0% +0.05Ω ±0.5% +0.05Ω (1) ±1%, E24/E96 1W Rated Voltage (1): 3-1773449-2 CIS WR 10/2011 RR03 Resistance Range: Maximum rated voltage is the limiting voltage Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, go to: te.com/help Power Resistor Type RR Series Dimensions L B d D A A ±1 B L ±1 øD ±0.5 ød ±0.1 RR01 52 5 ±0.5 6.8 2.6 0.65 l ±3 30 RR02 52 5 ±0.5 9.0 3.5 0.8 30 RR03 63 10 ±1 15.0 5.0 0.8 30 Mounting The resistors are suitable for processing on automatic insertion equipment, cutting and bending machines. Derating Curve 100 Pmax (%) 80 60 40 20 0 -55 0 70 100 155 235 Tamb (°C) Maximum dissipation (Pmax) in percentage of rated power as a function of ambient temperature (Tamb) Fusing Characteristics Fusing Time (S) 100 10 1 0.1 12 16 20 24 28 32 36 40 Multiple of the Power Rating 3-1773449-2 CIS WR 10/2011 Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, go to: te.com/help Power Resistor Type RR Series Pulse Characteristics 1W 105 Po T Pmax (W) 104 10s Condition Test: Resistance change ≤±5% with pulse 1000 cycles as like the figure (reference only). One Pulse 103 1. Added power and added voltage are within the lower teritory of this graph. 102 2. Added in normal temperature and humidity. 10 10-6 10-5 10-4 10-3 10-2 10-1 1 Ti(S) Maximum permissible peak pulse power (Pmax) as a function of pulse duration (Ti) 2W 105 Po 10 Pmax (W) 4 T 10s One Pulse Condition Test: Resistance change ≤±5% with pulse 1000 cycles as like the figure (reference only). 103 1. Added power and added voltage are within the lower teritory of this graph. 102 2. Added in normal temperature and humidity. 10 10-6 10-5 10-4 10-3 10-2 10-1 1 Ti(S) Maximum permissible peak pulse power (Pmax) as a function of pulse duration (Ti) 3W 105 Po T 10 4 10s Pmax (W) One Pulse Condition Test: Resistance change ≤±5% with pulse 1000 cycles as like the figure (reference only). 103 1. Added power and added voltage are within the lower teritory of this graph. 102 2. Added in normal temperature and humidity. 10 10-6 10-5 10-4 10-3 10-2 10-1 1 Ti(S) Maximum permissible peak pulse power (Pmax) as a function of pulse duration (Ti) Marking The nominal resistance and tolerance are marked on the resistor using four or five coloured bands in accordance with IEC publication 60062 “Colour code for fixed resistors”. Standard values of nominal resistance are taken from the E24/E96 series for resistors with a tolerance of ±5% or ±1%. The values of the E24/E96 series are in accordance with IEC publication 60063. 3-1773449-2 CIS WR 10/2011 Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, go to: te.com/help Power Resistor Type RR Series Packaging Ammo Pack Boxed M N P RR01 75 100 255 Quantity 5000 RR02 75 55 255 1000 RR03 100 110 265 1000 Packaging - Tape and Reeled Taping M N P q V Quantity pcs. RR01 52 ±1.0 80 295 295 310 75 5000 RR02 52 ±1.0 80 295 295 310 75 2500 RR03 63 ±1.0 80 295 295 310 75 1000 How to Order RR 01 J Common Part Power Rating Tolerance J - 5% 02 - 2 Watts F - 1% 03 - 3 Watts TR Value Packaging 100 ohm (100 ohms) 100R 01 - 1 Watt RR - Power Resistor 1K0 1K0 (1000 ohms) 1K0 100 K ohm (100,000 ohms) 100K TR - Reeled TB - Ammo Pack TE Connectivity and the TE connectivity (logo) are trademarks. Other logos, product and Company names mentioned herein may be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.