RTS3L005

General Purpose RT-iPower SCHRACK Power PCB Relay RT Inrush Power n 1 pole 16A, 1 form A (NO) contact (AgSnO2 or W pre-make contact + AgSnO2) n Mono- or bistable coil n 5kV/10mm coil-contact n Reinforced insulation n Test tab (manual operator) optional for RTT3T bistable versions n WG version: product in accordance to IEC60335-1 n RTS3T: Electronic ballast UL508/NEMA 410 rated n RTSET: 8A Electronic ballast rated Typical applications LED lighting systems, filament and incandescent lamp loads, movement detectors, light sensors, intelligent wall sockets, motors (RTS3L), bus system actuators. Zb Approvals VDE Cert. No. 40007571,UL E214025, cCSAus 1142018 Technical data of approved types on request. Contact Data RT.3T / RTSET RTS3L Contact arrangement 1 form A (NO) contact Rated voltage 250VAC Max. switching voltage 480VAC Rated current 16A Limiting continuous current 16A 20A Limiting making current, max. 20ms (incand. lamps) 165A peak 120A peak max. 200µs 800A peak Breaking capacity max. 4000VA Contact material W (pre-make cont.) AgSnO2 +AgSnO2 Contact style pre-make contact single contact Frequency of operation, with/without load 360/3600h-1 Operate/release time max., DC coil 10/5ms Operate/Reset time max., bistable version 10/10ms Bounce time max. 4ms Contact ratings Type Contact Load Cycles IEC 61810 RTS3L A (NO) 20A, 250VAC resistive, 70°C 20x103 RTS3L monostable A (NO) 16A, 250VAC resistive, 85°C 100x103 RTS3T A (NO) 16A, 250VAC resistive, 85°C 5x103 In process: Type Contact Load Cycles RTSET A (NO) 16A, 250VAC resistive, 85°C 5x103 UL 508 RTS3L A (NO) 20A, 250VAC, general purpose, 70°C 20x103 RTS3L A (NO) 16A, 250VAC, resistive, 85°C 50x103 RTS3L A (NO) TV8, 240VAC, 40°C 25x103 RTS3L A (NO) 1.5hp, 240VAC, 70°C 30x103 RTS3T A (NO) 1200W Tungsten, 120VAC/277VAC, 60Hz, 50°C 6x103 RTS3T A (NO) 2A, 480VAC, magnetic ballast, 80°C 10x103 * RTS3T A (NO) 2A, 480VAC, electronic ballast, 80°C 10x103* RTS3T A (NO) 3A, 277VAC, electronic ballast, 80°C 15x103 RTS3T A (NO) 5A, 120VAC, electronic ballast, 80°C 15x103 RTS3T A (NO) 5A, 277VAC, electronic ballast, 85°C 10x103 RTS3T A (NO) 5A, 347VAC, electronic ballast, 105°C with z.c 10x103* RTS3T A (NO) 5A, 347VAC, magnetic ballast, 105°C 10x103 RTS3T A (NO) 3A, 480VAC, magnetic ballast, 105°C 10x103* RTSET A (NO) 16A, 250VAC, general purpose, 85°C 5x103 RTSET A (NO) 8A, 277VAC, electronic ballast, 85°C 6x10³ RTSET A (NO) 5A, 277VAC, electronic ballast, 85°C 10x103 RTSET A (NO) 3A, 277VAC, electronic ballast, 85°C 20x103 RTSET A (NO) 5A, 120VAC, electronic ballast, 85°C 20x103 Contact Data (continued), Mechanical endurance DC coil bistable version tab manually operated RT.3T / RTSET >5x106 ops. >3x106 / >1x106 ops. >1x103 ops. Coil Data, monostable DC coil Coil voltage range Operative range, IEC 61810 Coil insulation system according UL1446 RT.3T RTS3L >10x106 ops. >5x106 ops. - RTSET 5 to 110VDC 2 class F RTS3L Coil versions, monostable DC coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power 1) VDC VDC VDC Ω±10% mW 005 5 3.5 0.5 62 403 006 6 4.2 0.6 90 400 009 9 6.3 0.9 203 400 012 12 8.4 1.2 360 400 024 24 16.8 2.4 1440 400 048 48 33.6 4.8 5520 417 060 60 42.0 6.0 85701) 420 110 110 77.0 11.0 288001) 420 1) Coil resistance ±12%. All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. * Special test conditions available on request 01-2019, Rev. 0119 www.te.com © 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose RT-iPower SCHRACK Power PCB Relay RT Inrush Power (Continued) Coil Data (continued), bistable coils 1 coil 2 coils Coil Data RT.3T RTS3L Magnetic system polarized, bistable Coil voltage range 3 to 24VDC Operative range, IEC 61810 2 Limiting voltage, % of rated coil voltage 120% 150% Min./Max. energization duration 30ms/1min at