RU73X2A121RLTDF

Thin Film Ultra Precision Resistors Type RU73 Series Key Features High precision TCR 2ppm/°C and 3ppm/°C Tolerance down to 0.01% Thin film (nichrome) Available in standard and high power versions Terminal finish – electroplated 100% matte Sn Applications Communications Industrial Controls Instrumentation Medical TE Connectivity are proud to introduce this ultra-high precision thin film chip resistor, sister to our successful RN73 series. With tolerances from 0.01% to 0.1% and TCRs of ±2PPM and ±3PPM this takes the chip resistor into new areas of stability and precision. Available on tape and reel for automatic insertion processes, the RU73 is available in 7 case sizes, with a higher power version available for 0603 to 2010 sizes Electrical Characteristics – Standard Power RU73 Rated Power @ 70°C Min Resistance Range Ω Max Tolerance (%) Code Letter T.C.R. (PPM°C) Code Letter Selection Series Max operating Voltage Max. Overload voltage Operating Temp. range Insulation Resistance (dry min.) Stability 1773270-1 CIS WR 09/2015 49R9 4K99 0.01 L 2 3 X O 0402 0.063W 49R9 4K99 0.05 A 2 3 X O E24 & E96 25V 50V -55 ~ +155°C 49R9 4K99 24R9 15K 0.01 L 0.1 B 2 X 3 O 2 X MΩ 24R9 15K 0.1 B 2 X 3 O MΩ 0.5% Dimensions in millimetres unless otherwise specified 3 O 0603 0.063W 24R9 15K 0.05 A 2 3 X O E24 & E96 50V 100V -55 ~ +155°C 0.5% Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Thin Film Ultra Precision Resistors Rated Power @ 70°C Min Resistance Range Ω Max Tolerance (%) Code Letter T.C.R. (PPM°C) Code Letter Selection Series Max operating Voltage Max. Overload voltage Operating Temp. range Insulation Resistance (dry min.) Stability Rated Power @ 70°C Min Resistance Range Ω Max Tolerance (%) Code Letter T.C.R. (PPM°C) Code Letter Selection Series Max operating Voltage Max. Overload voltage Operating Temp. range Insulation Resistance (dry min.) Stability Rated Power @ 70°C Min Resistance Range Ω Max Tolerance (%) Code Letter T.C.R. (PPM°C) Code Letter Selection Series Max operating Voltage Max. Overload voltage Operating Temp. range Insulation Resistance (dry min.) Stability 0805 0.1W 24R9 30K 0.05 A 24R9 30K 0.01 L 2 X 3 O 2 3 X O E24 & E96 100V 200V -55 ~ +155°C 24R9 30K 0.1 B 2 X 24R9 49K9 0.01 L 3 O 2 X 3 O MΩ 24R9 49K9 0.01 L 2 X 3 O 0.5% 0.5% 1210 0.25W 24R9 49K9 0.05 A 2010 0.25W 24R9 100K 0.05 A 2 3 X O E24 & E96 150V 300V -55 ~ +155°C 24R9 49K9 0.1 B 2 X 24R9 100K 0.01 L 3 O 2 X MΩ 2 X 2 3 X O E24 & E96 150V 300V -55 ~ +155°C 2 X 3 O 3 O 2 3 X O E24 & E96 150V 300V -55 ~ +155°C 24R9 100K 0.1 B 2 X 3 O MΩ 0.5% 2512 0.5W 24R9 100K 0.05 A 3 O 24R9 49K9 0.1 B MΩ 0.5% 24R9 100K 0.01 L 1206 0.125W 24R9 49K9 0.05 A 2 3 X O E24 & E96 150V 300V -55 ~ +155°C 24R9 100K 0.1 B 2 X 3 O MΩ 0.5% Operating Voltage=√ P*R) or Max. operating voltage listed above, whichever is lower. O erload Voltage= . *√ P*R or Max. o erload oltage listed a o e, hi he er is lo er. 1773270-1 CIS WR 09/2015 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Thin Film Ultra Precision Resistors Electrical Characteristics – High Power RU73P Rated Power @ 70°C Min Resistance Range Ω Max Tolerance (%) Code Letter T.C.R. (PPM°C) Code Letter Selection Series Max operating Voltage Max. Overload voltage Operating Temp. range Insulation Resistance (dry min.) Stability Rated Power @ 70°C Min Resistance Range Ω Max Tolerance (%) Code Letter T.C.R. (PPM°C) Code Letter Selection Series Max operating Voltage Max. Overload voltage Operating Temp. range Insulation Resistance (dry min.) Stability Rated Power @ 70°C Min Resistance Range Ω Max Tolerance (%) Code Letter T.C.R. (PPM°C) Code Letter Selection Series Max operating Voltage Max. Overload voltage Operating Temp. range Insulation Resistance (dry min.) Stability 0603 0.1W 24R9 15K 0.05 A 24R9 15K 0.01 L 2 X 3 O 2 3 X O E24 & E96 75V 150V -55 ~ +155°C 24R9 15K 0.1 B 2 X 24R9 30K 0.01 L 3 O 2 X 3 O MΩ 24R9 49K9 0.01 L 2 X 3 O 0.5% 0.5% 1206 0.25W 24R9 49K9 0.05 A 1210 0.33W 24R9 49K9 0.05 A 2 3 X O E24 & E96 200V 400V -55 ~ +155°C 24R9 30K 0.1 B 2 X 24R9 49K9 0.01 L 3 O 2 X 2 3 X O E24 & E96 200V 400V -55 ~ +155°C 3 O 3 O 2 3 X O E24 & E96 200V 400V -55 ~ +155°C 24R9 49K9 0.1 B 2 X 3 O 0.5% 2010 0.75W 24R9 49K9 0.05 A 3 O 2 X MΩ 0.5% 2 X 24R9 30K 0.1 B MΩ MΩ 24R9 49K9 0.01 L 0805 0.125W 24R9 30K 0.05 A 2 3 X O E24 & E96 150V 300V -55 ~ +155°C 24R9 49K9 0.1 B 2 X 3 O MΩ 0.5% Operating Voltage=√ P*R or Max. operating oltage listed a o e, hi he er is lo er. O erload Voltage= . *√ P*R or Max. o erload oltage listed a o e, hi he er is lo er. 1773270-1 CIS WR 09/2015 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Thin Film Ultra Precision Resistors Environmental Characteristics Item Temperature Coefficient of Resistance (TCR) Requirement Tol. ≤ . % TOL. >0.05% As per TCRs specified in Electrical Characteristics tables ΔR±0.05% Short Time Overload ΔR± . MΩ % Endurance MIL-STD-202 Method 304 +25/-55/+25/+125/+25°C JIS-C-5201-1 5.5 RCWV*2.5 or Max. overload voltage whichever is lower for 5 seconds MIL-STD-202 Method 302 Apply 100VDC for 1 minute MIL-STD-202 Method 108A 70±2°C, RCWV for 1000 hrs with 1.5 hrs ON and . hrs OFF MIL-STD-202 Method 103B 40±2°C, 90~95% R.H. RCWV for 1000 hrs with 1.5 hrs ON and . hrs OFF JIS-C-5201-1 6.1.4 Bending amplitude 3 mm for 10 seconds MIL-STD-202 Method 208H 245±5°C for 3 seconds MIL-STD-202 Method 210E 260±5°C for 10 seconds MIL-STD-202 Method 301 Max. overload voltage for 1 minute MIL-STD-202 Method 107G -55°C ~150°C, 100 cycles JIS-C-5201-1 7.1 1 hour, -65°C, followed by 45 minutes of RCWV ΔR±0.2% > Insulation Resistance Test Method ΔR± . % >7kΩ ΔR± . % Damp Heat with Load ΔR± . % ΔR± . % Bending Strength ΔR± . % ΔR± . % Solderability 95% min. coverage Resistance to Soldering Heat Dielectric Withstand Voltage ΔR± . Thermal Shock ΔR± . % ΔR± . Low Temperature Operation ΔR± . % ΔR± . % % ΔR± . % By Type % Storage Temperature: 25±3°C; Humidity < 80%RH Derating Curve Power ratio(%) 100 80 60 40 20 0 0 20 40 60 80 100 120 140 160 180 Ambient Temperature(℃) For resistors operated in ambient temperatures above 70°C, power rating must be derated in accordance with this curve 1773270-1 CIS WR 09/2015 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Thin Film Ultra Precision Resistors Construction and dimensions L D1     W T  D2    Alumina Substrate  Edge Electrode (NiCr)  Resistor Layer (NiCr)  Top Electrode ( Ag)  External Electrode (Sn)  Marking  Bottom Electrode (Ag)  Barrier Layer (Ni)  Overcoat (Epoxy) Size L (mm) W (mm) T (mm) D1 (mm) D2 (mm) 0402 0603 0805 1206 1210 2010 2512 1.00±0.05 1.55±0.10 2.00±0.15 3.05±0.15 3.10±0.15 4.90±0.15 6.30±0.15 0.50±0.05 0.80±0.10 1.25±0.15 1.55±0.15 2.40±0.15 2.40±0.15 3.10±0.15 0.30±0.05 0.45±0.10 0.55±0.10 0.55±0.10 0.55±0.10 0.55±0.10 0.55±0.10 0.20±0.10 0.30±0.20 0.30±0.20 0.42±0.20 0.40±0.20 0.60±0.30 0.60±0.30 0.20±0.10 0.30±0.20 0.40±0.20 0.35±0.25 0.55±0.25 0.50±0.25 0.50±0.25 Weight (g) (1000 Pcs.) 0.54 1.83 4.71 9.02 10 23.61 38.06 Suggested PCB Layout Plan Size 0402 0603 0805 1206 1210 2010 2512 1773270-1 CIS WR 09/2015 Recommended Land Pattern A B 0.50 0.50 0.80 1.00 1.00 1.00 2.00 1.15 2.00 1.15 3.60 1.40 4.90 1.60 Dimensions in millimetres unless otherwise specified C 0.60±0.2 0.90±0.2 1.35±0.2 1.70±0.2 2.50±0.2 2.50±0.2 3.10±0.2 Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Thin Film Ultra Precision Resistors Marking Case sizes 0805 to 2512 IEC 4 Digit Marking: R 1000 Resistance Code Ω K . kΩ 2201 K 1002 kΩ 99K 4992 99kΩ K 1003 kΩ Case Size 0603 E24 3 digit marking – Example 101 = 100R 102=1K0 E24 10 33 11 36 12 39 13 43 15 47 16 51 18 56 20 62 22 68 24 75 27 82 30 91 Case size 0603 E96 3 digit marking – Examples 14C = 13K7 68B = 4K99 68X = 49R9 Code 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Code Multiplier E96 100 102 105 107 110 113 115 118 121 124 127 130 133 137 140 143 147 150 154 158 162 165 169 174 A ⁰ B 10¹ Code 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 C 10² E96 178 182 187 191 196 200 205 210 215 221 226 232 237 243 249 255 261 267 274 280 287 294 301 309 D 10³ E Code 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 F E96 316 324 332 340 348 357 365 374 383 392 402 412 422 432 442 453 464 475 487 499 511 523 536 549 G H Code 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 X E96 562 576 590 604 619 634 649 665 681 698 715 732 750 768 787 806 825 845 866 887 909 931 953 976 Y ⁻¹ Z ⁻ ⁻ NB For case size 0603 values other than E24 and E96 resistors will be supplied unmarked. All resistors smaller than 0603 supplied unmarked. 1773270-1 CIS WR 09/2015 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Thin Film Ultra Precision Resistors Packaging Packing Quantity and Reel Specification Size 0402 0603 0805 1206 1210 2010 2512 ØA ±1.0 178.0 ØB ±1.0 60.0 ØC ±0.7 W ±1.0 T ±1.0 Paper Tape Embossed Plastic Tape 9.5 11.5 1000 / 5000 N/A 13.5 15.5 N/A 4000 13.5 Paper tape Specification Size A ±0.05 B ±0.05 0402 0.70 1.16 0603 1.10 1.90 0805 1206 1210 1.60 2.00 2.75 W ±0.10 E ±0.05 F ±0.05 P P ± . ØD 2.00 ±0.05 8.00 1.75 2.37 3.55 3.40 1773270-1 CIS WR 09/2015 P 3.5 4.00 ±0.10 4.00 ±0.10 4.00 ±0.05 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change 2.00 1.55 ±0.05 1.60 ±0.10 T 0.40 ±0.03 0.60 ±0.03 0.75 ±0.05 For Email, phone or live chat, go to: www.te.com/help Thin Film Ultra Precision Resistors Peel force of top cover tape The peel speed shall be about 300mm/min±5% The peel force of top cover tape shall be between 8gf to 60gf Embossed Plastic Tape Specifications Top Tape ψ D0 E A F B W ψ D1 1.4Min. T P1 Resistor P2 P0 direction of unreeling Emboss Tape Type A B W E F P0 P1 P2 ØD0 T 2010 2.85±0.10 5.45±0.10 12.0±0.10 1.75±0.10 5.5±0.05 4.00±0.05 4.00±0.10 2.00±0.05 1.50+0.10 1.00±0.20 2512 3.40±0.10 6.65±0.10 12.0±0.10 1.75±0.10 5.5±0.05 4.00±0.05 4.00±0.10 2.00±0.05 1.50+0.10 1.00±0.20 Peel force of top cover tape The peel speed shall be about 300mm/min±5% The peel force of top cover tape shall be between 20gf to 80g 1773270-1 CIS WR 09/2015 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Thin Film Ultra Precision Resistors Reflow Solder Profile Reel dimension (mm) Time of Reflow soldering at maximum temperature point 260°C = 10s Wave Solder Profile Qty / Reel 2000 A ±0.5 2 B ±0.5 13.5 C ±0.5 21 D ±1 60 M ±2 178 W ±1 13.8 Handling Recommendations When flow soldering - the land width must be smaller than the Chip Resistor width to properly control the solder application. Generally, the land width can be Chip Resistor width (W) x 0.7 to 0.8. When reflow soldering – solder Time of Wave soldering at maximum temperature point 260°C = 10s application amount can be adjusted. Thus the land width can be set to W x 1.0 Timetoof1.3. Soldering Iron at maximum temperature point 410°C = 5s How To Order RU73 Common Part RU73 – Standard power RU73P – High power X To Order 2A How 100R B TD TCR Package Value Tolerance Packaging 3521 Size 1K0 F T X - ±2ppm/°C 1E - 0402 100R L – ±0.01% TDF – 1000 reel Common Part Tolerance (1E,Pack 1J, 2A,Style 2B) 1J – 0603Resistance Value Ω O - ±3ppm/°C 2A – 0805 A ±0.05% 1 ohm 1R0 TD – 5000 reel 2B – 1206 1K0 (1E, 1J, 2A, 2B, 2E) 2E – 1210 Ω B - ±0.1% 2H – 20101K ohm 1000 ohms TET– – 4000 reel 3A - 2512 10K 1K0 3521 F – 1% 2000 (2H, 3A only (10, Ω J – 5% reel ) 1 Meg ohm 1000000 ohms 1M0 1773270-1 CIS WR 09/2015 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help