S02-10-R-90

SPECIFICATION CONTROL DRAWING Product Revision Product Name S02-07-R-XX * Ident. Code SIZE2R S02-08-R-XX * SIZE3R S02-10-R-XX * SIZE5R Component Dimensions øB øC L±1.75 min min (L±0.07) 16.5 2.65 3.68 (0.650) (0.105) (0.140) 16.5 4.30 5.08 (0.650) (0.170) (0.200) 19.1 7.00 7.60 (0.750) (0.275) (0.300) H min 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) øD max 2.65 (0.105) 4.30 (0.170) 7.00 (0.275) Cable Dimensions øE øF max min 3.68 1.40 (0.140) (0.055) 5.08 2.15 (0.200) (0.085) 7.60 4.30 (0.300) (0.170) øG max 0.72 (0.030) 1.25 (0.050) 2.50 (0.100) * Consult Raychem for individual product revision. Contains more than 1 part name. MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. THERMAL INDICATOR: Color change violet to colorless. 3. MELTABLE RINGS: Thermally stabilized thermoplastic. Color: blue. 4. PRE-INSTALLED LEAD: MIL-W-22759/32-22-XX*. (Raychem 55A0111-22-XX*) *XX: Part name and lead callout shall be replaced with lead color designation per MIL-STD-681. Colors available: solid and with single stripe. APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 105°C minimum, meeting the dimensional criteria listed and having tin or silver plated shields and insulation compatible with the insert material. For compatible insulations, see SAE-AS83519/2 or consult Raychem. 2. When installed per Raychem process standard RCPS-100-70, assemblies will meet those requirements of Raychem Specification RT-1404 and SAE-AS83519/2. 3. For assembly information, refer to Raychem document RCPS-100-70. 4. Parts shall be marked with identification code per table. For best results,prepare the cable as shown: - Strip length of shield: 6.35 – 8.25 (.250 - .325) - Use methods (a) or (b) with cable rated for 125°C and above. Use method (c) for cables rated for 105°C and cable with spiral wrapped shields. a) Window Strip b) End Strip THERMOFIT DEVICES c) End Strip with Fold Back TITLE: 300 Constitution Drive Menlo Park, CA 94025, USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to amend 0.00 N/A this drawing at any time. Users should 0.0 N/A ROUGHNESS IN evaluate the suitability of the product for 0 N/A MICRON their application. SOLDERSLEEVE SHIELD TERMINATION ENVIRONMENT RESISTANT WITH LEAD DOCUMENT NO.: S02-07/-08/-10-R-XX DCR NUMBER: REPLACES: D000419 DRAWN BY: DATE: PROD. REV. DOC ISSUE: SCALE: M. FORONDA 27-Sept-00 SEE TABLE 2 None Print Date: 12-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision N/A SIZE: A SHEET: 1 of 1