S24517PT36RSM

S24517PT MIMO Sector Antenna 3X3 ELEMENT DUAL-BAND PANEL ANTENNA Laird's S24517PT is a dual-band, directional sector antenna for use in 802.11n MIMO applications. Enclosed in a low-profile radome, the antenna is mounted using the included articulating mount. The mount can be affixed to a mast or anchored directly to a vertical surface. Each of the three MIMO antenna elements are connected to the WLAN Access Point via a low loss, plenum-rated, coax pigtail. The radiation patterns are uniform and symmetrical, providing high-level signal density into defined coverage zones. This antenna will greatly enhance the performance of 802.11n systems. The dual-band frequency coverage means that a single type of antenna can be deployed with any MIMO radio in the 2.4-2.5 GHz and 5.1-5.9 GHz bands. FEATURES • Low profile housing • Performance optimized using Laird's proprietary RF optimization tools • Designed specifically to support 802.11n networks • Various connector and coax lengths options available Americas: +1.847 839.6907 IAS-AmericasEastSales@lairdtech.com Europe: +44.1628.858941 IAS-EUSales@lairdtech.com Asia: +86.21.5855.0827.127 IAS-AsiaSales@lairdtech.com www.lairdtech.com MARKETS • • • • • Hospital Campus Research Institute Public safety wireless systems Transport Terminals PARAMETER SPECIFICATION Frequency (MHz) 2400 - 2500, 5150 - 5875 Gain (dBi) 8 @ 2450 MHz, 10.7 @ 5500 MHz E-Plane (3 dB beamwidth) 75º @ 2.45 GHz / 55º @ 5.5 GHz H-Plane (3 dB beamwidth) 70º @ 2.45 GHz / 60º @ 5.5 GHz Polarization Linear, 2 Vertical, 1 Horizontal VSWR 2.0:1 Cable Lenght in. (mm) 36” (914) Plenum rated (other lenghts available) RF connector Reverse SMA (3x) Power (watts) 1 Radome Polycarbonate Dimensions in. (mm) 10.2 x 10.2 x 1.3 (259.1 x 259.1 x 33.5) Weight (kg) 1.8 Wind Surface Area @ 0º, 0.0067m2 / @ 90º, 0.009m2 Wind survival 200 km/h Operational temperature (Cº ) -30º to +65º Mount style (articulating) Wall / mast Water / dust seal rating IP-67 Laird warrants to the original end user customer of its products that its products are free from defects in material and workmanship. Subject to conditions and limitations Laird will, at its option, either repair or replace any part of its products that prove defective by reason of improper workmanship or materials. This limited warranty is in force for the useful lifetime of the original end product into which the Laird product is installed. Useful lifetime of the original end product may vary but is not to exceed five (5) years from the original date of the end product purchase. ANT-DS-S24517PT 0915 Any information furnished by Laird Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability or suitability of any Laird materials or products for any specific or general uses. Laird shall not be liable for incidental or consequential damages of any kind. All Laird products are sold pursuant to the Laird Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2015 Laird Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Logo, and other marks are trade marks or registered trade marks of Laird Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights.