SB0920

Glass Wire Wound sensor Type GX         Temperature sensor Large temperature range From -200°C to +400°C No hysteresis High vibrations resistant Resistant to external forces and pressures Small dimensions High temperature stability Short response time DESCRIPTION One or two platinum bands layout are wounded on a glass tube and are protected from environment by a glass layer. FEATURES APPLICATIONS  Nominal value: 100  at 0°C Tolerance according to IEC 60751: class W 0.3, W 0.15 and W 0.1 Temperature coefficient  = 3850 ppm/K Closer tolerances in restricted temperature range  Environments subject to high vibrations  Cryogenics  Accurate temperature measurement with high temperature gradient  Connection wires: Platinum coated nickel  The lead wires connection is pull up force resistant  Housing advise: To be used preferably in dry environment  Limited mounting space required Options: - Lead wires length - Extension cable  Food industry  H.V.A.C.  GWW type GX www.meas-spec.com 1/3 Rev1 February 2012 Glass Wire Wound sensor Type GX PERFORMANCE SPECIFICATIONS Type DesiReference gnation Nominal reference (Ohm at 0°C) 1Pt100 1Pt100 1Pt100 1Pt100 1Pt100 2Pt100 GX 518 GX 1013 GX 1018 GX 1218 GX 1513 GX 1528 1Pt100 1Pt100 1Pt100 1Pt100 2Pt100 GX 518 GX 1013 GX 1218 GX 1513 GX 1528 1Pt100 1Pt100 1Pt100 1Pt100 GX 518 GX 1013 GX 1218 GX 1513 L WL D AL1 AL2 (Dimensions in mm) A Selfheating in air (K/mW) Response time (s) Water v = 0,4 m/s t0,5 t0,9 Tolerance Class W 0.3 = ± (0.3+0.005 ItI) From -196°C to + 400°C 32 205 108 100 5 3 1,8 10 - 0,20 0,36 0,14 0,35 32 205 113 100 10 6 1,3 10 - 0,20 0,39 0,4 1,30 32 205 118 100 10 6 1.8 10 - 0,20 0.36 0.14 0.35 34 015 120 100 12 3 1.8 6 - 0,20 0.36 0.14 0.35 SB0921 100 15 6 1.3 10 - 0,20 0.39 0.4 1.3 32 205 228 100 15 7 2,8 10 12 0,25 0,20 0,3 1,0 Tolerance Class W 0.15 = ± (0.15+0.002 ItI) From -100°C to + 250°C 32 205 074 100 5 3 1,8 10 - 0,20 0,36 0,14 0,35 32 205 458 100 10 6 1,3 10 - 0,20 0,39 0,4 1,30 34 015 121 100 12 3 1.8 6 - 0,20 0.36 0.14 0.35 SB0920 100 15 6 1.3 10 - 0,20 0.39 0.4 1.3 32 205 241 100 15 7 2,8 10 12 0,25 0,20 0,3 1,0 Tolerance Class W 0.1 = ± (0.1+0.0017 ItI) From 0°C to + 150°C 32 205 101 100 5 3 1,8 10 - 0,20 0,36 0,14 0,35 32 205 463 100 10 6 1.3 10 - 0.20 0.39 0.4 1.3 34 015 123 100 12 3 1.8 6 - 0,20 0.36 0.14 0.35 SB0919 100 15 6 1.3 10 - 0,20 0.39 0.4 1.3 Air v = 1 m/s t0,5 t0,9 8 4 8 8 4 12 30 12 30 30 12 45 8 4 8 4 12 30 12 30 12 45 8 4 8 4 30 12 30 12 VALUES FOR PT100 °C -200 -150 -100 -50 0 50 100 GWW type GX Ohms 18.52 39.72 60.26 80.31 100 119.40 138.51 Ohms/°C 0.432 0.417 0.405 0.397 0.391 0.385 0.379 °C 150 200 250 300 350 400 www.meas-spec.com 2/3 Ohms 157.33 175.86 194.10 212.05 229.72 247.09 Ohms/°C 0.374 0.368 0.362 0.356 0.350 0.345 Rev1 February 2012 Glass Wire Wound sensor Type GX BLOCK DIAGRAM DIMENSIONAL TOLERANCES: L D AL A (length of body) (diameter of body) (connection wire length) (connection wire diameter) =  1mm = +0,1;-0,3mm =  2mm =  0,02 mm ORDERING INFORMATION NORTH AMERICA EUROPE ASIA MEAS - Shrewsbury 910 Turnpike Road Shrewsbury, MA 01545 United States +1 508-842-0516 +1 508-842-0342 MEAS - France 48, rue de Frégy 77610 Fontenay Trésigny France Tel: +33(0) 1 64 42 52 52 Fax: +33(0) 1 64 42 63 17 temperature.cs.amer@meas-spec.com sales.ftny.fr@meas-spec.com MEAS - China No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 518057 China Tel: +86 (0) 755 33305088 Fax: +86 (0) 755 33305099 temperature.sales.asia@meas-spec.com The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. GWW type GX www.meas-spec.com 3/3 Rev1 February 2012 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: SB0920