Axial Leaded Power Inductors
Type SC10, SC15, SC30, SC55 Series
Key Features
I
Wide Inductance Range
I
Insulated Packaging
I
Four Sizes
I
Flame Retardant
I
Wide Temperature Range
I
Established Reliability
I
Fully Protected from the
Environment
I
Available from
Distribution
TE Connectivity quality and reliability are guaranteed in this range of insulated and
shielded RF Inductors. The insulated range has a self-extinguishing polyolefin sleeve.
Their small size make them ideal for use when space is at a premium. And they are also
fully protected from environmental factors. Electrostatic and electromagnetic screening is
provided by the magnetic enclosure. A wide range of values are available and the self
extinguishing polyolefin sleeve enhances environmental protection. The SC series was
originally designed for military applications but now has widespread industrial use.
Characteristics - Electrical
SC10
SC15
SC30
SC55
See Table - E12 Grid
(Non-standard values available to special order)
Selection Tolerance:
±10%
±10%
±10%
±10%
Power Rating at 70°C:
0.33W
See Below
0.25W
0.30W
Isolation Voltage:
700V DC or AC peak
Limits of Inductance Change:
5% after 1000 hours endurance
Operating Temperature Range:
-55°C to +100°C
-55°C to +100°C -55°C to +100°C
-55°C to +125°C
Recommended Storage Temperature:
0°C to +35°C
Climatic Category:
55/100/21
55/100/21
55/100/21
55/125/21
Inductance Range:
SC15 Power Rating Values between 0.15uH and 4.7uH - Power Rating 0.33 Watt
Values between 5.6uH and 330uH - Power Rating 0.20 Watt
Packaging and Marking
Type
Ammo Pack
Reeled
Weight per Component
Marking
SC10
500 Pieces
1500 Pieces
–
LC10
SC15
500 Pieces
1500 Pieces
–
LC15
SC30
500 Pieces
2500 Pieces
–
LC30
SC55
500 Pieces
1500 Pieces
0.6g
LC55
Dimensions
1773282 CIS BI 03/2012
Size
L Max.
D Max.
l Min.
d
SC10
10.0mm
4.2mm
25mm
0.6mm
SC15
10.0mm
4.5mm
30mm
0.6mm
SC30
7.0mm
2.8mm
25mm
0.5mm
SC55
11.4mm
5.2mm
30mm
0.6mm
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
For email, phone or live chat, go to: te.com/help
Axial Leaded Power Inductors
Type SC10, SC15, SC30, SC55 Series
Characteristics - Electrical - Type SC10 - Section 1
Max. DC
Direct Current
Resistance
at 70°C
Ohms at 20°C
Max. mA
Inductance
Value - μH
Inductance
Code
Test Freq.
MHz
Q Factor
Min.
S.R.F.
MHz Min.
0.10
R10
25
50
500
0.055
2060
0.12
R12
25
50
475
0.060
1970
0.15
R15
25
50
450
0.065
1900
0.18
R18
25
50
425
0.070
1830
0.22
R22
25
50
400
0.075
1770
0.27
R27
25
50
380
0.085
1660
0.33
R33
25
50
360
0.095
1570
0.39
R39
25
50
330
0.11
1460
0.47
R47
25
50
300
0.12
1390
0.56
R56
25
50
280
0.14
1290
0.68
R68
25
45
260
0.16
1210
0.82
R82
25
45
235
0.26
950
1.0
1R0
25
45
210
0.30
880
1.2
1R2
7.9
32
190
0.50
685
1.5
1R5
7.9
32
170
0.60
625
1.8
1R8
7.9
32
156
0.75
560
2.2
2R2
7.9
32
140
1.10
460
2.7
2R7
7.9
32
125
1.40
410
3.3
3R3
7.9
32
115
1.90
350
Type SC10 - Section 2
Max. DC
Resistance
Ohms at 20°C
Direct Current
at 70°C
Max. mA
Inductance
Value - μH
Inductance
Code
Test Freq.
MHz
Q Factor
Min.
S.R.F.
MHz Min.
3.9
3R9
7.9
45
75
0.25
970
4.7
4R7
7.9
45
65
0.35
820
5.6
5R6
7.9
45
60
0.40
765
6.8
6R8
7.9
45
55
0.55
650
8.2
8R2
7.9
45
50
0.75
560
10
100
7.9
45
45
0.9
510
12
120
2.5
55
40
1.1
460
15
150
2.5
55
35
1.5
395
18
180
2.5
55
30
2.7
295
22
220
2.5
55
27
3.0
280
27
270
2.5
55
25
4.5
230
33
330
2.5
55
22
5.2
210
39
390
2.5
55
20
7.5
175
47
470
2.5
55
18
9.6
156
S.R.F.
MHz Min.
Type SC10 - Section 3
Inductance
Value - μH
Inductance
Code
Test Freq.
MHz
Q Factor
Min.
56
560
2.5
55
11
68
680
2.5
55
10
82
820
2.5
50
8.5
100
101
2.5
50
7.0
120
121
0.79
40
6.5
150
151
0.79
40
5.5
180
181
0.79
45
5.0
220
221
0.79
45
4.2
270
271
0.79
45
3.8
330
331
0.79
45
3.3
390
391
0.79
45
3.1
470
471
0.79
45
2.9
560
561
0.79
45
2.7
680
681
0.79
45
2.5
820
821
0.79
45
2.3
1000
102
0.79
40
2.2
Max. DC
Direct Current
Resistance
at 70°C
Ohms at 20°C
Max. mA
8.1
9.0
10.0
11.0
12.0
13.0
15.0
17.0
19.5
22.0
24.5
26.5
30.0
33.0
36.5
40.0
170
161
153
146
140
134
125
117
110
103
98
94
88
84
80
76
Section 1 was formerly the TE Connectivity C10 Series, Section 2 was formerly the TE Connectivity C11 Series,
Section 3 was formerly the TE Connectivity C12 Series
1773282 CIS BI 03/2012
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
For email, phone or live chat, go to: te.com/help
Axial Leaded Power Inductors
Type SC10, SC15, SC30, SC55 Series
Characteristics - Electrical
Type SC15
Inductance
Code
Test Freq.
MHz
Q Factor
Min.
S.R.F.
MHz Min.
0.15
25
25
25
25
25
25
25
25
25
25
25
7.9
7.9
7.9
7.9
50
45
50
45
45
45
45
50
50
50
50
33
33
33
33
525
480
450
400
360
350
310
280
250
220
200
180
160
150
135
0.030
2790
0.040
2420
0.055
2060
0.070
1830
0.090
1610
0.100
1530
0.120
1400
0.135
1320
0.15
1250
0.22
1030
0.29
900
0.42
750
0.50
685
0.65
600
2.2
R15
R18
R22
R27
R33
R39
R47
R56
R68
R82
1R0
1R2
1R5
1R8
2R2
0.95
495
2.7
2R7
7.9
33
120
1.20
440
3.3
3R3
7.9
33
110
2.00
340
3.9
3R9
7.9
33
100
2.30
320
4.7
4R7
7.9
33
90
2.60
300
5.6
5R6
7.9
45
60
0.32
690
6.8
6R8
7.9
50
55
0.50
550
8.2
8R2
7.9
50
50
0.60
505
10
100
7.9
55
45
0.90
415
12
120
2.5
65
42
1.10
375
15
150
2.5
65
40
1.40
330
18
180
2.5
75
34
2.25
260
22
220
2.5
75
30
2.50
250
24*
240*
2.5
60
27
2.50
250
27
270
2.5
60
25
2.60
242
30
300
2.5
65
21
2.80
230
33
330
2.5
65
19
3.00
227
36*
360*
2.5
60
15.5
2.50
250
39
390
2.5
60
14.5
2.60
244
43*
430*
2.5
60
13.7
2.70
238
47
470
2.5
55
13.0
2.75
235
51*
510*
2.5
55
12.7
2.85
231
56
560
2.5
55
12.0
3.00
225
62*
620*
2.5
55
11.5
3.15
220
68
680
2.5
55
11.0
3.30
215
75*
750*
2.5
55
10.5
3.70
203
82
820
2.5
50
10.3
3.90
200
91*
910*
2.5
50
10.0
4.30
188
100
101
2.5
50
9.5
4.50
185
110*
111*
0.79
60
8.9
4.90
176
120
121
0.79
65
8.7
5.20
170
130*
131*
0.79
65
8.5
5.45
167
150
151
0.79
65
8.0
6.05
160
160*
161*
0.79
65
7.5
6.40
154
180
181
0.79
65
7.0
6.75
150
200*
201*
0.79
65
6.5
7.10
147
220
221
0.79
65
6.2
7.45
144
240*
241*
0.79
65
5.9
7.80
140
270
271
0.79
65
5.7
9.00
131
300*
301*
0.79
65
5.4
11.50
118
330
331
0.79
65
5.1
12.50
111
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
1773282 CIS BI 03/2012
Max. DC
Direct Current
Resistance
at 70°C
Ohms at 20°C
Max. mA
Inductance
Value - μH
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
For email, phone or live chat, go to: te.com/help
Axial Leaded Power Inductors
Type SC10, SC15, SC30, SC55 Series
Characteristics - Electrical
Type SC30
Inductance
Value - μH
Inductance
Code
0.022
R022
0.027
R027
0.033
Test Freq.
MHz
Max. DC
Direct Current
Resistance
at 70°C
Ohms at 20°C
Max. mA
Q Factor
Min.
S.R.F.
MHz Min.
50
33
1245
0.006
3000
50
33
1200
0.010
2800
R033
50
33
1175
0.026
2620
0.039
R039
50
33
1130
0.033
2320
0.047
R047
50
33
1060
0.038
2170
0.056
R056
50
33
990
0.048
1930
0.068
R068
50
33
900
0.055
1800
0.082
R082
50
33
750
0.065
1650
0.10
R10
25
40
680
0.080
1490
0.12
R12
25
40
640
0.090
1400
0.15
R15
25
38
600
0.10
1330
0.18
R18
25
35
550
0.12
1210
0.22
R22
0.27
R27
0.33
R33
0.39
R39
0.47
R47
0.56
R56
0.68
R68
0.82
R82
1.0
1R0
1.2
1R2
1.5
1R5
1.8
1R8
2.2
2R2
2.7
2R7
3.3
3R3
3.9
3R9
4.7
4R7
5.6
5R6
6.8
6R8
8.2
8R2
10
100
12
120
15
150
18
180
22
220
27
270
33
330
39
390
47
470
56
560
68
680
82
820
100
101
120
121
150
151
180
181
220
221
270
271
330
331
390
391
470
471
560
561
680
681
820
821
1000
102
25
25
25
25
25
25
25
25
25
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
7.9
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
0.79
0.79
0.79
0.79
0.79
0.79
0.79
0.79
0.79
0.79
0.79
0.79
33
33
30
30
30
30
28
28
25
25
28
30
30
37
45
45
45
50
50
55
55
45
45
50
50
50
45
45
45
45
50
50
50
30
30
30
30
30
30
30
30
30
30
30
30
510
430
410
365
330
300
275
250
230
150
140
125
115
100
90
80
75
65
60
55
50
40
35
30
25
20
24
22
20
18
15
14
13
12
11
10
9
8
7
6.5
6
5
4
3.8
3.4
0.14
0.16
0.22
0.30
0.35
0.50
0.60
0.85
1.00
0.18
0.22
0.30
0.40
0.55
0.85
1.0
1.2
1.8
2.0
2.7
3.7
2.7
2.8
3.1
3.3
3.5
3.4
3.6
4.5
5.7
6.7
7.3
8.0
13.0
15.0
17.0
21.0
25.0
28.0
35.0
42.0
46.0
60.0
65.0
72.0
1120
1050
900
770
710
595
540
455
420
990
895
765
665
565
455
420
384
314
298
256
219
256
251
239
232
225
228
222
198
176
162
156
149
116
108
102
92
84
79
71
65
62
54
52
49
The SC30 Series was formerly the TE Connectivity C30 Series
1773282 CIS BI 03/2012
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
For email, phone or live chat, go to: te.com/help
Axial Leaded Power Inductors
Type SC10, SC15, SC30, SC55 Series
Characteristics - Electrical
Type SC55
Inductance
Value (μH)
Inductance
Code
Q
Min.
Test Freq
MHz
S.R.F.
MHz Min.
Max. DC
Resistance
Ohms
Direct Current
Body
at 85°C
Marking
Max. mA
1.0
1R0
45
7.9
190.0
0.04
2200
1uH0-K
1.5
1R5
65
7.9
155.0
0.05
2000
1uH5-K
2.2
2R2
60
7.9
130.0
0.06
1800
2uH2-K
3.3
3R3
50
7.9
110.0
0.07
1700
3uH3-K
4.7
4R7
50
7.9
95.0
0.12
1300
4uH7-K
6.8
6R8
60
7.9
85.0
0.22
1000
6uH8-K
10
100
50
7.9
65.0
0.35
750
10uH-K
15
150
55
2.5
55.0
0.60
600
15uH-K
22
220
65
2.5
45.0
1.10
430
22uH-K
33
330
85
2.5
35.0
2.00
300
33uH-K
47
470
70
2.5
20.0
2.50
270
47uH-K
68
680
65
2.5
16.0
3.00
250
68uH-K
100
101
65
2.5
14.0
4.00
220
mH10-K
150
151
80
0.79
9.5
5.80
230
mH15-K
220
221
80
0.79
8.0
7.30
200
mH22-K
330
331
80
0.79
7.5
12.00
160
mH33-K
470
471
80
0.79
6.5
20.00
120
mH47-K
680
681
85
0.79
5.0
24.00
110
mH68-K
1000
102
85
0.79
3.0
30.00
100
1mH0-K
How to Order
SC30
104
K
T
Common Part
Inductance Value
Tolerance
Packaging
Please state code given
in data above
K - 10%
SC10
SC15
SC30
R - Reeled
T - Ammo Pack
SC55
TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks.
Other logos, product and Company names mentioned herein may be trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other
representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein
at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
很抱歉,暂时无法提供与“SC30R82KT”相匹配的价格&库存,您可以联系我们找货
免费人工找货