SHF260-0113-8-9

SCD SPECIFICATION CONTROL DRAWING Title SHF260-0113 Date WIRE, MODIFIED PERFLUOROALKOXY COPOLYMER RESIN-INSULATED, 1000 VOLT Revision 7-10-17 K This specification sheet forms a part of the latest issue of Raychem Specification WCD 3111. CONDUCTOR - NICKEL-COATED COPPER INSULATION - MODIFIED PFA TABLE I. CONSTRUCTION DETAILS FINISHED WIRE PART NUMBER 1/ WIRE SIZE (AWG) CONDUCTOR STRANDING (number x AWG) SHF260-0113-24-* SHF260-0113-22-* SHF260-0113-20-* SHF260-0113-18-* SHF260-0113-16-* SHF260-0113-14-* SHF260-0113-12-* SHF260-0113-10-* SHF260-0113-8-* SHF260-0113-6-* SHF260-0113-4-* SHF260-0113-2-* SHF260-0113-1-* SHF260-0113-0-* SHF260-0113-00-* SHF260-0113-000-* SHF260-0113-0000-* 24 22 20 18 16 14 12 10 8 6 4 2 1 0 00 000 0000 105 x 44 154 x 44 154 x 42 259 x 42 259 x 40 665 x 42 665 x 40 665 x 38 665 x 36 1045 x 36 1665 x 36 1665 x 34 2109 x 34 2660 x 34 3325 x 34 4123 x 34 5320 x 34 DIAMETER OF STRANDED CONDUCTOR (inch) (mm) MINIMUM .023 .029 .037 .047 .061 .078 .096 .126 .157 .192 .265 .325 .370 .435 .485 .540 .615 (.584) (.737) (.940) (1.19) (1.55) (1.98) (2.44) (3.20) (3.99) (4.88) (6.73) (8.26) (9.40) (11.0) (12.3) (13.7) (15.6) MAXIMUM .027 .033 .043 .053 .067 .086 .106 .140 .173 .208 .285 .345 .400 .465 .515 .575 .655 (.686) (.838) (1.09) (1.35) (1.70) (2.18) (2.69) (3.56) (4.39) (5.28) (7.24) (8.76) (10.2) (11.8) (13.1) (14.6) (16.6) MAXIMUM RESISTANCE AT 20°C (ohms/1000 ft.) (ohms/km) 30.6 21.9 13.3 8.67 5.10 3.32 1.99 1.14 .714 .490 .326 .193 .163 .133 .102 .073 .057 (100.) (71.8) (43.6) (28.4) (16.7) (10.9) (6.53) (3.74) (2.34) (1.61) (1.07) (.633) (.535) (.436) (.335) (.240) (.187) NOMINAL WEIGHT (lbs/1000 ft.) (kg/km) DIAMETER (inch) mm) MINIMUM .050 .058 .069 .079 .093 .112 .131 .163 .195 .231 .310 .373 .426 .494 .546 .606 .685 (1.27) (1.47) (1.75) (2.01) (2.36) (2.84) (3.33) (4.14) (4.95) (5.87) (7.87) (9.47) (10.8) (12.5) (13.9) (15.4) (17.4) NOMINAL .053 .061 .072 .082 .096 .116 .137 .171 .205 .242 .323 .387 .441 .510 .564 .626 .707 (1.35) (1.55) (1.83) (2.08) (2.44) (2.95) (3.48) (4.34) (5.21) (6.15) (8.20) (9.83) (11.2) (13.0) (14.3) (15.9) (18.0) MAXIMUM .056 .064 .075 .085 .099 .120 .143 .179 .215 .253 .336 .401 .456 .526 .582 .646 .729 (1.42) (1.63) (1.91) (2.16) (2.51) (3.05) (3.63) (4.55) (5.46) (6.43) (8.53) (10.2) (11.6) (13.4) (14.8) (16.4) (18.5) 3.10 (4.61) 4.23 (6.29) 5.96 (8.87) 8.58 (12.8) 12.2 (18.2) 19.1 (28.4) 27.3 (40.6) 44.7 (66.5) 67.7 (101.) 102. (152.) 168. (250.) 250. (372.) 308. (458.) 395. (588.) 491. (731.) 604. (899.) 774. (1152.) NOTE: Nominal values are for information only. Nominal values are not requirements. Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. TE Connectivity also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. Raychem, TE Connectivity, and TE connectivity (logo) are trademarks. Page 1 of 2 DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL. THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. Raychem Wire & Cable 501 Oakside Avenue Redwood City, CA 94063-3800 Phone: 1-800-522-6752 Fax: 1-650-361-6297 © 2014-2017 TE Connectivity Ltd. family of companies. All Rights Reserved. Page SPECIFICATION CONTROL DRAWING PART NUMBER 1/ SHF260-0113-24-* SHF260-0113-22-* SHF260-0113-20-* SHF260-0113-18-* SHF260-0113-16-* SHF260-0113-14-* SHF260-0113-12-* SHF260-0113-10-* SHF260-0113-8-* SHF260-0113-6-* SHF260-0113-4-* SHF260-0113-2-* SHF260-0113-1-* SHF260-0113-0-* SHF260-0113-00-* SHF260-0113-000-* SHF260-0113-0000-* LIFE CYCLE .500 (12.7) .500 (12.7) .500 (12.7) .750 (19.1) 1.00 (25.4) 1.00 (25.4) 1.50 (38.1) 2.00 (50.8) 3.00 (76.2) 4.00 (102.) 5.00 (127.) 6.00 (152.) 8.00 (203.) 8.00 (203.) 10.0 (254.) 10.0 (254.) 10.0 (254.) Revision 2 of 2 TABLE II. PERFORMANCE DETAILS BEND TESTING MANDREL DIAMETER (inch) (mm) (± 3%) MINIMUM WRAP COLD BEND RADIUS TEST BEND .500 (12.7) .500 (12.7) 1.00 (25.4) .750 (19.1) .750 (19.1) 1.00 (25.4) .750 (19.1) .750 (19.1) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.50 (38.1) 1.00 (25.4) 1.00 (25.4) 1.50 (38.1) 1.25 (31.8) 1.25 (31.8) 2.00 (50.8) 1.50 (38.1) 1.50 (38.1) 2.00 (50.8) 2.00 (50.8) 2.00 (50.8) 3.00 (76.2) 2.25 (57.2) 2.25 (57.2) 4.00 (102.) 2.75 (69.9) 2.75 (69.9) 5.00 (127.) 3.75 (95.3) 3.75 (95.3) 6.00 (152.) 4.50 (114.) 4.50 (114.) 8.00 (203.) 5.00 (127.) 5.00 (127.) 10.0 (254.) 6.00 (152.) 6.00 (152.) 10.0 (254.) 6.00 (152.) 6.00 (152.) 12.0 (305.) 7.50 (191.) 7.50 (191.) 12.0 (305.) 8.00 (203.) 8.00 (203.) 12.0 (305.) SCD SHF260-0113 K WEIGHT (lb) (kg) (± 3%) LIFE COLD CYCLE BEND 1.50 (.680) 3.00 (1.36) 2.00 (.907) 3.00 (1.36) 3.00 (1.36) 4.00 (1.81) 4.00 (1.81) 4.00 (1.81) 4.00 (1.81) 5.00 (2.27) 6.00 (2.72) 5.00 (2.27) 6.00 (2.72) 5.00 (2.27) 6.00 (2.72) 5.00 (2.27) 8.00 (3.63) 6.00 (2.72) 8.00 (3.63) 10.0 (4.54) 8.00 (3.63) 10.0 (4.54) 12.0 (5.44) 15.0 (6.80) 12.0 (5.44) 15.0 (6.80) 12.0 (5.44) 15.0 (6.80) 16.0 (7.26) 20.0 (9.07) 16.0 (7.26) 20.0 (9.07) 16.0 (7.26) 20.0 (9.07) WIRE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 260°C for 10,000 hours VOLTAGE RATING: 1000 volts (rms) at sea level COLOR: White preferred CONCENTRICITY: 70% (minimum) INSULATION ELONGATION AND TENSILE STRENGTH: Elongation, 150% (minimum) Tensile Strength, 2000 lbf/in2 (13.8 N/mm2) (minimum) INSULATION FLAWS: Spark Test, 6.0 kV (rms) Impulse Dielectric Test, 8.0 kV (peak) LOW TEMPERATURE-COLD BEND: -65 ± 2°C for 4 hours SHRINKAGE: 290 ± 2°C for 6 hours, AWG 24-00: 0.125 in. (3.18 mm) (maximum) in 12 inches (305 mm) AWG 000-0000: 0.250 in. (6.35 mm) (maximum) in 12 inches (305 mm) SMOKE TEST (Qualification): Per WCD 3111, no visible smoke Per SAE AS4373, Method 803 (Flaming Mode only), 0.02 Ds (nominal) after 16 minutes 1/ See footer section on page 1 THERMAL SHOCK RESISTANCE: 260 ± 2°C, AWG 24-12: 0.060 in. (1.52 mm) (maximum) AWG 10-8: 0.100 in. (2.54 mm) (maximum) AWG 6-00: 0.125 in. (3.18 mm) (maximum) AWG 000-0000: 0.250 in. (6.35 mm) (maximum) UV LASER MARKING (Per SAE AS4373, Method 1001): AWG 24-2, white (-9) wire only: Solid Laser, 50% (minimum) Dot Matrix Laser, 50% (minimum) VOLTAGE WITHSTAND (Post Environmental): 3000 volts (rms) WRAP TEST: 290 ± 2°C for 2 hours 1/ PART NUMBER: The "*" in the part numbers in Tables I and II shall be replaced by a color code designator. Example: AWG 0, white: SHF260-0113-0-9