SIL09E154J

General Purpose Resistor Networks SIL Resistor Networks (Standard Packages) Key Features I 2% & 5% Tolerances I Low Price Keeps Production Costs Down I Solvent Proof Coating I Very Wide Range I Low Profile (5.08mm Max.) I Very Strong Construction I High Insulation Resistance Fully automated production techniques, ensure this extensive range offers you consistently high standards of performance and reliability. TE Connectivity (TE) can meet all your demands with its range of 4 to 13 resistor elements in common format and 3 to 7 resistor elements in isolated types. The substrate and lead frame provide exceptional strength and the resistors are protected from humidity and thermal shock by a hardwearing, solvent proof black coating. TE Connectivity (TE) will also manufacture custom design networks for your special requirements. Please contact our Sales Action Desk for details. Characteristics - Electrical Resistance Range: 10R to 1M0 (E24 Values) Resistance Tolerances: 5%, 2% Maximum Operating Voltage: 100 Volts Power Rating @ 70°C (Series): 0.125 Watts (Parallel): 0.200 Watts Characteristics - Environmental Test Method Spec. 1773284 CIS BI 06/2011 JIS - C - 5202 MIL - R - 83401 Operating Temperature: -55° ~ +125°C Resistance Temp. Coefficient: ±200ppm/°C 5.2 (B) 6.4.8 Short Time Overload: ±1.0% 5.5 4.6.10 Temperature Cycle: ±0.5% 7.4 ( -55°C ~ 125°C) 4.6.3 Load Life: ±2.0% 7.10 (1000 hr.) 4.6.18(70°C 1000hr) Moisture-Proof Load Life: ±2.0% 7.9 (1000 hr.) Moisture Resistance: ±1.0% High Temperature Exposure: ±1.0% Solderability: 95% coverage min. 6.5 (235°C/2s) 4.6.6 Solder Pot: ±0.5% 6.4 (260°C/10s) 4.6.14 Terminal Strength: ±0.5% 6.1 (1) 1kg/10s) 4.6.11 Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. 4.6.15 4.6.19 For email, phone or live chat, go to: te.com/help General Purpose Resistor Networks SIL Resistor Networks (Standard Packages) Circuit Configuration Please Note: Common Terminal Devices (configuration E) are marked A on the body of the resistor. Isolated Terminal Devices (configuration M) are marked either B or C on the body of the resistor. M. Isolated Terminal E. Common Terminal Power Derating Curve 100 % Power 80 60 40 20 0 -55 -30 0 20 40 60 70 80 100 120 125 130 Temperature (°C) Dimensions 2.54 x n 2.50 Max 5.08 Max 0.50 ±0.1 3.5 ±0.5 1.20 ±0.1 2.54 ±0.2 0.25 ±0.05 n = number of pins How to Order SIL 08 Common Part No. of Pins E Circuit Config. Resistance Value 04 - 4 Pins SIL 472 05 - 5 Pins E - Common Terminals 06 - 6 Pins M - Isolated Terminals 07 - 7 Pins 08 - 8 Pins 09 - 9 Pins 10 - 10 Pins 11 - 11 Pins The first two digits are significant figures of resistance value and the third denotes the number of zeros following. J Tolerance J - 5% G - 2% e.g. 220R: 221 4K7: 472 51K: 513 470K: 474 12 - 12 Pins 13 - 13 Pins 14 - 14 Pins TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Other logos, product and Company names mentioned herein may be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.