SO63-2-00

SPECIFICATION CONTROL DRAWING Product Revision Product Name SO63-1-00 E Ident. Code SO631R SO63-2-00 E SO632R SO63-3-00 E SO633R SO63-4-00 E SO634R SO63-5-00 E SO635R L1.75 (L0.07) 16.5 (0.650) 16.5 (0.650) 16.5 (0.650) 19.1 (0.750) 19.1 (0.750) Product Dimensions øA øB min min 1.90 2.65 (0.075) (0.105) 2.65 3.68 (0.105) (0.145) 4.30 5.08 (0.170) (0.200) 5.95 6.45 (0.235) (0.255) 7.00 7.60 (0.275) (0.300) C min 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) øD max 1.90 (0.075) 2.65 (0.105) 4.30 (0.170) 5.95 (0.235) 7.00 (0.275) Cable Dimensions øE øF max min 2.65 0.90 (0.105) (0.035) 3.68 1.40 (0.145) (0.055) 5.08 2.15 (0.200) (0.085) 6.45 3.30 (0.255) (0.130) 7.60 4.30 (0.300) (0.170) øG min 0.50 (0.020) 0.75 (0.030) 1.25 (0.050) 1.80 (0.070) 2.50 (0.100) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR: SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. THERMAL INDICATOR: Fusible ring, melt point: 221C. 3. MELTABLE RINGS: Environment resistant thermoplastic. Color: blue. APPLICATION 1. These parts are designed to provide an environment resistant shield terminations on cables, rated for 125C minimum, meeting the dimensional criteria listed, having tin or silver plated shields and insulation compatible with the insert material. For compatible insulations, see MIL-S-83519/1 or consult Raychem. 2. When installed per Raychem process standard RCPS-100-70, assemblies will meet requirements of Raychem Specification RT-1404 and MIL-S-83519. 3. Temperature range: -55C to +150C. For best results, prepare the cable as shown: * A trademark of TE Connectivity. TE Connectivity 300 Constitutional Drive Menlo Park, CA 94025 USA RAYCHEM SOLDERSLEEVE* SHIELD TERMINATOR, IMMERSION RESISTANT UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to amend this 0.00 N/A drawing at any time. Users should evaluate the 0.0 N/A ROUGHNESS IN suitability of the product for their application. 0 N/A MICRON DRAWN BY: CAGE CODE: REPLACES: DCR NUMBER: M. FORONDA 06090 D981343 TITLE: D981964 DOCUMENT NO.: SO63-X-00 DATE: DOC ISSUE: 7 16-Apr-11 PROD. REV.: SEE TABLE Print Date: 9-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision SCALE: None SIZE: SHEET: A 1 of 1