SR4D4024

General Purpose Relays Force Guided Relays SCHRACK Force Guided Relay SR4 D/M n 4 pole relay with force guided contacts according to EN EN61810-3 (formerly EN50205) n Compact design and space efficient Typical applications Emergency shut-off, press control, machine control, elevator and escalator control, safety relays F0244-C Z Approvals VDE Cert. No. 40005334, UL E214025, TUV 968/EL 230, CCC 2020970303000303 Technical data of approved types on request Contact Data Contact arrangement 3 form A + 1 form B contacts 3 NO + 1 NC 2 form A + 2 form B contacts 2 NO + 2 NC Rated voltage 250VAC Max. switching voltage 400VAC Rated current 8A Contact material AgSnO2 Contact style single contact, force guided type A according to EN61810-3 (formerly EN50205) Min. recommended contact load 5V/10mA Initial contact resistance ≤100mΩ at 1A, 24VDC ≤20Ω at 10mA, 5VDC Frequency of operation, with/without load 6/150min-1 Contact ratings Type Contact Load Cycles IEC 61810 SR4 1xA (NO) 8A, 250VAC, cosφ=1, 70°C 20x103 SR4 1xB (NC) 5A, 250VAC, cosφ=1, 70°C 20x103 UL 508 SR4 A/B (NO/NC) 8A, 250VAC, general purpose, 70°C 6.000 SR4 1xA (1xNO) R300, B300 6.000 SR4 1xB (1xNC) R300 6.000 EN60947-5-1 SR4 1xA/1xB (1xNO/1xNC) 3A, 24VDC, DC13 6.050 SR4 1xA (1xNO) 3A, 250VAC AC-15 6.050 More ratings and information see product specification 2158002 Mechanical endurance 10x106 operations 10-2020, Rev. 1020 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Coil data Coil voltage range 5 to 110VDC Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10% mW 005 5 3.8 0.5 31 806 006 6 4.5 0.6 45 800 009 9 6.8 0.9 101 802 012 12 9.0 1.2 180 800 015 15 11.3 1.5 281 801 018 18 13.5 1.8 405 800 021 21 16.0 2.1 551 800 024 24 18.0 2.4 720 800 036 36 27.0 3.6 1620 800 040 40 30.0 4.0 2000 800 048 48 36.0 4.8 2880 800 060 60 45.0 6.0 4500 800 085 85 63.8 8.5 9031 800 110 110 83.0 11.0 15125 800 All figures are given for coil without pre-energization, at ambient temperature +23°C. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose Relays Force Guided Relays SCHRACK Force Guided Relay SR4 D/M (Continued) Insulation Data PCB layout / terminal assignment Initial dielectric strength between open contacts 1500Vrms between contact and coil 4000Vrms between adjacent contacts 2500Vrms Clearance/creepage between open contacts microdisconnection between contact and coil ≥10/10mm between adjacent contacts ≥3/3.5mm Insulation to EN 50178, type of insulation between contact and coil reinforced between adjacent contacts basic Bottom view on solder pins S0413-BC Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -25 to 70°C Category of environmental Protection IEC 61 810 RTIII Weight 30g Resistance to soldering heat THT IEC 60068-2-20 260°C/5s Packaging/unit tube/10 pcs. 2 form A + 2 form B, 2 NO + 2 NC contacts S0413-BB 3 form A + 1 form B, 3 NO + 1 NC contacts For more detailed information see product specification 2158002 Dimensions S0413-BA S0412-BH Product code structure Typical product code SR4 D 4 012 Type SR4 Relay with force guided contacts SR4 Contact arrangement D 2 form A + 2 form B contacts (2 NO + 2 NC) M 3 form A + 1 form B contacts (3 NO + 1 NC) Contact material 4 AgSnO2 Coil Coil code: please refer to coil versions table (e.g. 012=12VDC) Other types on request 2 10-2020, Rev. 1020 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. General Purpose Relays Force Guided Relays SCHRACK Force Guided Relay SR4 D/M (Continued) Product code Type Contact arrangement Contact material Coil Part number SR4D4005 4 pole 2 form A + 2 form B, AgSnO2 5VDC 7-1415054-1 SR4D4006 relay with 2 NO + 2 NC 6VDC 8-1415054-1 SR4D4009 force guided contacts contacts 9VDC 9-1415054-1 SR4D4012 12VDC 1415055-1 SR4D4018 18VDC 1-1415055-1 SR4D4021 21VDC 2-1415055-1 SR4D4024 24VDC 3-1415055-1 SR4D4036 36VDC 4-1415055-1 SR4D4040 40VDC 5-1415055-1 SR4D4048 48VDC 6-1415055-1 SR4D4060 60VDC 7-1415055-1 SR4D4085 85VDC 8-1415055-1 SR4D4110 110VDC 9-1415055-1 SR4M4005 3 form A + 1 form B, 5VDC 5-1415053-1 SR4M4006 3 NO + 1 NC 6VDC 6-1415053-1 SR4M4009 contacts 9VDC 7-1415053-1 SR4M4012 12VDC 8-1415053-1 SR4M4018 18VDC 9-1415053-1 SR4M4021 21VDC 1415054-1 SR4M4024 24VDC 4-1415053-1 SR4M4036 36VDC 1-1415054-1 SR4M4040 40VDC 2-1415054-1 SR4M4048 48VDC 3-1415054-1 SR4M4060 60VDC 4-1415054-1 SR4M4085 85VDC 5-1415054-1 SR4M4110 110VDC 6-1415054-1 10-2020, Rev. 1020 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 3