SSR3TR-480D25R

Solid State Relay Potter & Brumfield SSR3 Series Three Phase Solid State Relay with Motor Reversing File E29244 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features • LED indicator. • TRIAC output. • 10, 25, 40A rms versions. • 50-480Vac output type. • Zero voltage and random voltage turn-on versions. • DC input version. • 4000V rms optical isolation. • Safety cover to meet IP 20 protection. • Epoxy filled. • Transient voltage protection by MOVs externally. • Panel mountable. • Positive input interlock system. Engineering Data Isolation: 4000V rms minimum. Temperature Range: Storage: –30°C to +100°C Operating: –30°C to +80°C. Case Material: Plastic, UL rated 94V-0. Case and Mounting: Refer to outline dimension. Termination: Refer to outline dimension. Approximate Weight: 16.6 oz. (471g). Ordering Information Typical Part Number SSR3 T R -480 D 75 R 1. Basic Series: SSR3 = Three phase solid state relay 2. Switching: T = TRIAC Output 3. Direction Options: R = Motor reversing 4. Line Voltage: 480 = 50 - 480 5. Input Type & Voltage: D = 4 - 32VDC 6. Maximum Current Rating: 10=.1-10A rms, mounted to heatsink 25=.1-25A rms, mounted to heatsink 40=.1-40A rms, mounted to heatsink 7. Options: Blank = Zero voltage turn-on R = Random voltage turn-on (phase controllable) Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. SSR3TR-480D10 SSR3TR-480D25 SSR3TR-480D40 SSR3TR-480D10R SSR3TR-480D25R SSR3TR-480D40R Input Specifications Characteristics Control Voltage Range Must Operate Voltage Must Release Voltage Input Current Max Input Current @ 32Vdc Rated Volltage 1 02-2021, Rev. 0221 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Units Zero & Random Voltage Turn-on VIN(OP) VIN(REL) mA 10, 25 & 40A Model 4-32 4 1 30-80 mA 80 VIN Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. SOLID STATE RELAY Potter & Brumfield SSR3 Series (Continued) Output Specifications (@ 25°C, unless otherwise specified) Characteristics Load Voltage Range, VL Units VRMS 10A Models 25A Models 50-480 40A Models Load Current Range, IL A 10 25 40 On-State Voltage Drop @ Rated Current Vac Single cycle surge current A 1.6 100 Peak Off state Voltage Vac Off- State Leakage Current mA Fusing Current, I2T Rating A²s 55 Static dv/dt (Off-State) V/µs 400 Zero Turn-On Voltage Vpk Thermal Resistance, (Junction to Case, RJ-C) °C/W 250 400 800 5 340 880 500 25 2.4 0.9 0.6 Turn-On Time (F= 60/50 Hz) ms Zero - 10/8.3, Random - 0.1 Turn-Off Time (F= 60/50 Hz) ms Zero - 10/8.3, Random - 10 Electrical Characteristics (Thermal Derating Curves) Heatsink Recommendations • We recommend that solid state relay modules be mounted to a heatsink sufficient to maintain the module’s base temperature at less than 85°C under worst case ambient temperature and load conditions. • The heatsink mounting surface should be a smooth (30-40 micro-inch finish), flat (30-40 micro-inch flatness across mating area), un-painted surface which is clean and free of oxidation. • An even coating of thermal compound (Dow Corning DC340 or equivalent) should be applied to both the heatsink and module mounting surfaces and spread to a uniform depth of .002” to eliminate all air pockets. • The module should be mounted to the heatsink using two #8 screws. Thermal Pad Product Code : SSR-ACC-TH-003 Part Number : 2323803-2 Outline Dimensions Operating Diagrams * Overall height dimensions includes with clear cover Dimensions in mm R1,R2 : PROTECTION RESISTORS F1,F2 : SEMICONDUCTOR FUSES MOV POSITIVE INPUT INTERLOCKING INCLUDED * Note : Resistors and fuses are selected based on the customer's application. Only MOVs are provided by TE with the relay. 02-2021, Rev. 0221 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 2 SOLID STATE RELAY Potter & Brumfield SSR3 Series (Continued) Product Code Part Number SSR3TR-480D10 SSR3TR-480D25 SSR3TR-480D40 SSR3TR-480D10R SSR3TR-480D25R SSR3TR-480D40R 2-2345984-3 2-2345984-4 2-2345984-5 2-2345984-6 2-2345984-7 2-2345984-8 02-2021, Rev. 0221 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Screw details Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 3