STXR41AB45-1814AI

TINEL-LOCK RING 3 CODE 41 - TINEL-LOCK BACKSHELL STXR41AB00-1616AI-S SERIES STXR: RING INCLUDED (SEE RING OPTION) STX: RING NOT INCLUDED CONNECTOR INTERFACE MATERIAL REFER TO CH00-0250-008 FINISH REFER TO CH00-0250-008 ANGLE ORDER NUMBER (TABLE 1) ENTRY SIZE (TABLE 2) RING OPTION AI - TO SUIT SINGLE BRAID BI - TO SUIT DOUBLE BRAID FOR STX, LEAVE BLANK MODIFICATION CODE REFER TO CH00-0250-008 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD AND A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-008. 3. SEE DRAWING TR FOR DETAIL ON TINEL-LOCK RING, RINGS ARE DESIGNED TO BE HEATED ELECTRICALLY, ALL RINGS ARE MARKED WITH THERMOCHROMIC PAINT WHICH CHANGES COLOUR WHEN INSTALLATION TEMPERATURE IS REACHED. 4. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER LESS RING DESIGNATOR. (e.g. 06090-STXR41AB00-2018). RING SHALL BEAR NO MARKING. 5. TINEL-LOCK RING ENTRY SIZE AND BRAID DESIGNATOR IS TO BE SPECIFIED IN PART NUMBER WHEN ORDERING. 6. BACKSHELL MATES TO MIL-DTL-38999, SERIES I AND II, CLASS E AND T, MS27466, MS27467, MS27468, MS27472, MS27473, MS27474, MS27479, MS27480, MS27481, MS27484, MS27497, MS27652, MS27653, MS27656 CONNECTORS. 7. PREFIX 'S' DENOTES THAT THE BACKSHELL HAS A LARGER ENTRY THAN THE STANDARD TXR BUT IS STILL OF THE TYPE 1 DESIGN. 8. SEE SHEET 3 FOR TABLE OF ENTRY SIZE APPLICABLE TO THE STXR RANGE. FOR ENTRY SIZE LARGER THAN MAX INDICATED, CONTACT TE. MAX ENTRY ONLY APPLIES TO ANGLES 45 & 90. 9. THESE DIMENSIONS APPLY IF A SELF-LOCKING COUPLING NUT IS USED. DRAWN K.WINCZURA DATE CHECKED 20/01/2015 APPROVED K.SHEPPARD 29/01/2015 APPROVED LTR B C H.SMITH 3RD ANGLE PROJECTION NOT TO SCALE 20/01/2015 05/10/2015 REVISIONS DESCRIPTION REVISED PER ECO-15-002401 REVISED PER ECO-15-013980 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 24.02.15 APPROVED H.SMITH 05.10.15 H.SMITH TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: MIL-DTL-38999 SERIES I & II TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT STXR41 C 1 26,80 C SILICONE O-RING ØY ØZ XXXX ØS A THREAD ØB D PART MARK HERE 45° BACKSHELL STRAIGHT BACKSHELL W W T E E T 90° BACKSHELL 90° BACKSHELL STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE MODIFICATION S DRAWN K.WINCZURA DATE CHECKED 20/01/2015 APPROVED K.SHEPPARD 29/01/2015 APPROVED LTR B C H.SMITH 3RD ANGLE PROJECTION NOT TO SCALE 20/01/2015 05/10/2015 REVISIONS DESCRIPTION REVISED PER ECO-15-002401 REVISED PER ECO-15-013980 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 24.02.15 APPROVED H.SMITH 05.10.15 H.SMITH TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 A THREAD ØB 9 SELF-LOCKING MECHANISM TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: MIL-DTL-38999 SERIES I & II TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT STXR41 C 2 TABLE 1 ORDER SHELL SIZE NUMBER SER I/SER II 08 9/8 10 11 / 10 12 13 / 12 14 15 / 14 16 17 / 16 18 19 / 18 20 21 / 20 22 23 / 22 24 25 / 24 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE A THREAD 7/16-28UNEF 9/16-24UNEF 11/16-24UNEF 13/16-20UNEF 15/16-20UNEF 1 1/16-18UNEF 1 3/16-18UNEF 1 5/16-18UNEF 1 7/16-18UNEF ØB MAX 18,3 21,5 24,5 27,8 30,8 34,1 37,3 40,5 43,7 ØB MAX 9 18,0 21,0 25,0 28,0 31,0 34,0 37,0 40,0 43,5 ENTRY SIZE MIN MAX 8 05 06 08 10 10 12 12 16 14 18 16 20 18 22 20 24 22 24 TABLE 2 ENTRY SIZE 05 06 07 08 10 12 14 16 18 20 22 24 DRAWN K.WINCZURA DATE CHECKED 20/01/2015 APPROVED K.SHEPPARD 29/01/2015 APPROVED LTR B C H.SMITH 3RD ANGLE PROJECTION NOT TO SCALE 20/01/2015 05/10/2015 REVISIONS DESCRIPTION REVISED PER ECO-15-002401 REVISED PER ECO-15-013980 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 24.02.15 APPROVED H.SMITH 05.10.15 H.SMITH TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 ØZ MIN 7,92 9,53 11,10 12,70 15,88 19,05 22,23 25,40 28,58 31,75 34,93 38,10 C ±0,5 16,4 17,2 17,6 18,5 19,2 19,6 20,4 20,8 21,7 D ±0,5 26,8 27,5 28,0 29,0 29,7 30,5 30,9 31,1 32,1 ØS 11,06 +/-0,04 12,66 +/-0,04 14,21 +/-0,07 15,81 +/-0,07 18,96 +/-0,08 22,14 +/-0,08 25,30 +/-0,08 28,48 +/-0,08 31,65 +/-0,08 34,83 +/-0,08 37,98 +/-0,08 41,15 +/-0,08 W ±0,5 21,0 24,0 27,0 31,0 34,0 35,0 38,0 42,0 45,0 T ±0,5 14,0 15,5 17,0 19,5 21,0 20,0 21,5 24,0 25,5 E ±0,5 26,20 27,95 29,45 31,00 32,70 34,25 35,80 37,40 38,90 W ±0,5 21,3 24,4 28,4 31,2 34,3 38,6 40,8 43,8 46,5 T ±0,5 16,4 17,3 19,5 21,0 22,8 25,3 26,1 27,6 29,1 E ±0,5 26,4 28,2 29,7 31,2 32,9 34,5 36,1 37,6 39,1 ØY ±0.3 15,50 17,10 18,70 20,30 23,50 26,70 29,80 33,00 36,20 39,40 42,50 45,70 TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: MIL-DTL-38999 SERIES I & II TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT STXR41 C 3