General Purpose
High Power PCB Relays
Potter & Brumfield
Power PCB Relay T9E
n 1
pole 30A, 1 formA(NO) or 1 formC(CO)
breaking capacity 7500 VA
n PCB and PCB/quick connect terminals
n UL class F insulation as standard
n Ambient temperature up to 105°C
n Plastic materials according to IEC60335-1
n High
Typical applications
HVAC, power supplies, domestic appliances, measurement and control.
Approvals
Coil Data (continued)
Technical data of approved types on request.
Coil versions, DC coil
Coil
Rated
Operate
Release
Coil
Rated coil
code voltage voltage voltage
resistance power
VDC VDC VDC
Ω±10% W
Code D (1W) coil
6 6 4.5 0.6 36 1
9 9 6.75
0.9
81 1
12 12 9 1.2
144 1
18 18 13.5 1.8 324 1
22 22 16.5 2.2 484 1
24 24 18 2.4 576 1
48 48 36.2 4.8
2304 1
110 110 82.5 11 12100 1
Code L (900mW) coil
6 6 4.5 0.6 40 .9
12
12
9
1.2
155
.9
18 18 13.5 1.8 380 .9
24 24 18 2.4 660 .9
VDE 40027903, UL E58304
Contact Data
Contact arrangement
1 form A (NO)
1 form C (CO)
Rated voltage
240VAC
Max. switching voltage 250VAC (VDE); 300VAC (UL)
Rated current
30A
20A/10A
Limiting continuous current
30A
Breaking capacity max.
7500VA
5000/2500VA
Contact material
AgSnOInO (AgCdO optional)
Min. recommended contact load
1A, 5VDC or 12VAC
Initial contact resistance
75 mΩ at 1A at 5VDC or 12VAC
Frequency of operation, with/without load
6/120min-1
Operate/release time max., including bounce
15/15ms
Contact ratings
Type Contact
IEC 61810
AgSnOInO, 1W coil
1
NO
1
NO
2
NO
1, 2
CO
AgSnOInO, 900mW coil
1
NO
1
NO
EN 60730-1
AgSnOInO, 1W coil
1
NO
UL 508 1)
AgSnOInO, 1W coil
1, 2
NO
AgSnOInO, 900mW coil
1, 2
NO
Load
Cycles
30A, 250VAC, cosj=1, 60°C
20A, 250VAC, cosj=1, 85°C
20A, 250VAC, cosj=1, 70°C
20A / 10A, 250VAC, cosj=1, 60°C
20x103
100x103
100x103
20x103
17A, 250VAC, cosj=1, 105°C
20A, 250VAC, cosj=1, 85°C
100x103
100x103
12(12)A, 240VAC, 60°C
100x103
30A, 240VAC, general purpose, 25°C
100x103
TV-8, 125VAC, 25°C
All figures are given for coil without preenergization, at ambient temperature +23°C.
Insulation Data
Initial dielectric strength
between open contacts
1500Vrms
between contact and coil
2500Vrms
Initial surge withstand voltage
between contact and coil 6kV (1.2μs/50μs impulse wave)
Initial insulation resistance
between insulated elements
1x109Ω
Clearance/creepage
between contact and coil
≥3mm/4mm
25x103
1) Additional UL 508 ratings are available.
Mechanical endurance
Coil Data
Coil voltage range
Max. coil power
Max. coil temperature
Coil insulation system according UL
10x106 ops.
6 to 110VDC
110% of nominal
155°C
Class F
Coil operating ranges shown above are for 1W coils.
02-2014, Rev. 0214
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
1
General Purpose
High Power PCB Relays
Potter & Brumfield
Power PCB Relay T9E (Continued)
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
DC coil
-40ºC to 85ºC / 105°C
Category of environmental protection
IEC 61810
RTII - flux proof (T9EV)
RTIII - wash tight (T9ES)
Vibration resistance (functional)
1.5mm, 10-55 Hz
Shock resistance (functional)
10g for 11msec
Shock resistance (destructive)
100g
Other Data (Continued)
Terminal type PCB-tht and PCB-tht + quick
connect
Weight
26g mounting code 1
33g mounting codes 2 and 5
Resistance to soldering heat THT
IEC 60068-2-20
260°C
Packaging/unit
tray/50 pcs., box/250 pcs.
Dimensions
PCB version
PCB/quick connect version
27,4 MAX.
32,5 MAX.
32,5 MAX.
27,4 MAX.
S0290-A
S0289-A
+,41
3,3 –,25
Terminal assignment
Bottom view on pins
1 form A
1 form C
PCB layout
Bottom view on pins
PCB version
PCB/quick connect version
Only necessary terminals are
present on single throw models.
Consequently, some holes will
be unnecessary for single throw
models.
Only necessary terminals are
present on single throw models.
Consequently, some holes will
be unnecessary for single throw
models.
S0261-AH
S0261-AA
2
02-2014, Rev. 0214
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
General Purpose
High Power PCB Relays
Potter & Brumfield
Power PCB Relay T9E (Continued)
Product code structure
Typical product code
T9E
S 1 D 1 4 -24
Type
T9E Power PCB relay T9E
Enclosure
S Wash-tight plastic case with knock off nib
V Flux-proof plastic case
Contact arrangement
1 1 form A (1 NO)
5 1 form C (1 CO)
Coil Input
D DC voltage, 1W
L DC voltage, 900mW
Mounting and termination
1 PCB mounting; PCB terminals for coil and contacts
2 PCB mounting; PCB terminals for coil and contacts; 6.35mm (.250in) QC for contacts
Contact material
4 AgSnOInO
2 AgCdO – optionally available. Contact Product Engineering for availbaility and ratings.
Coil voltage
Coil code: please refer to coil versions table
Product Code
T9ES1L14-18
T9ES1D14-12
T9ES1D14-24
T9ES1D12-12
T9ES1D24-12
T9ES1D22-12
T9ES5D14-12
T9ES5D12-24
T9ES5D24-12
T9EV1D14-22
Enclosure
Mounting
Contact material
Contacts
Coil version
wash tight
PCB terminals
AgSnOInO
1 form A, 1 NO
900mW
1W
PCB + quick connect
PCB terminals
flux proof
02-2014, Rev. 0214
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
PCB + quick connect
PCB terminals
AgCdO
AgSnOInO
AgCdO
AgSnOInO
AgCdO
AgSnOInO
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
1 form C, 1 CO
1 form A, 1 NO
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Coil voltage Part number
18VDC
12VDC
24VDC
12VDC
12VDC
12VDC
12VDC
24VDC
12VDC
22VDC
1-2027234-8
2027234-2
2027234-7
1-2027234-0
2027234-8
1-2027243-3
2027234-6
2027234-4
2027234-9
2027234-5
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
3
