T9GV2L14-24.

General Purpose Relays Power Relays Potter & Brumfield T9G series, DC coil 30A PCB Relay n 30A switching in NO and 20A in CO Board space (29mm x 21.5mm) Meets UL 508 for clearance / creepage Meets IEC 61810-1 for reinforced insulation Option for load connections via 0.250” (6.3mm) quick connect terminals 4kV dielectric withstand and 8kV surge voltage between coil & contacts UL approved for 480 VAC switching n Minimum n n n n n Typical applications HVAC, Appliances, Industrial Controls, Energy Management Approvals UL 508; UL Listing #E214025 IEC 61810-1; VDE Listing #40045012 Technical data of approved types on request Contact Data Contact arrangement 1 form A (NO), 1 form B (NC), 1 form C (CO) Rated voltage 250VAC Max. switching voltage 480VAC Rated current 30A 20A 20A Contact material AgSnO Min. recommended contact load 1A, 12VAC/VDC Initial contact resistance 300mΩ at 100mA/6VDC Frequency of operation, with/without load 360 cycles / hour = with 3600 cycles / hour = without Operate/release time max., including bounce 15/22ms Contact ratings 1) UL 508 Type Load Cycles NO 5A, 480VAC, General Purpose 6x103 NO 15,6A, 480VAC, Resistive 100x103 NO 30A, 277VAC, General Purpose, 85°C 100x103 NO 18A, 250VAC, Resistive, 105°C 100x103 NO 22A, 250VAC, Resistive 250x103 NO 22A FLA, 98A LRA, 120VAC, Definite Purpose 100x103 NO 14A FLA, 82A LRA, 250VAC, Definite Purpose, 70°C 30x103 NO 20A, 277VAC, Standard Ballast 6x103 NO 1HP, 125VAC 100x103 Contact ratings 1) (continued) Type Load Cycles CO 20A, 250VAC, Resistive 15x103 CO 20A /10A, 240VAC, Resistive 100x103 CO 30A / 15A Resistive, 250VAC 20x103 CO 30A FLA / 80A LRA (N.O.); 12A FLA, 30A LRA 30x103 (N.C.) 250VAC, Definite Purpose CO 80A LRA / 10A FLA (N.O.); 33A LRA / 10A FLA 30x103 (N.C.) 250VAC, Definite Purpose IEC 61810-1 Type Load Cycles NO 30A, 250VAC, Resistive, 85°C (PCB) 75x103 NO 20A, 250VAC, Resistive, 70°C (QC), 85°C (PCB) 100x103 NO 17A, 250VAC, Resistive, 105°C 100x103 NO 20A, 250VAC, Resistive, 85°C 100x103 NO 12A (12A), 250VAC, 60°C (per EN60730-1) 150x103 NC 10A, 250VAC, Resistive, 60°C (C.O. type only) 50x103 CO 20A, 250VAC, Resistive, 60°C (N.C.) 10x103 CO 20A/10A, 250VAC, Resistive, 60°C (N.O.) 50x103 CO 12A , 250VAC, Resistive, 85°C 100x103 1) Contact ratings at 40°C (unless otherwise noted) with relay properly vented. Remove vent nib after soldering and cleaning. Mechanical endurance 10x106 ops. Coil Data NC 15A, 240VAC, General Purpose 100x103 Coil voltage range 5 to 110VDC NC 20A, 250VAC, Resistive (CO type only) 20x103 Max. coil power 110% of nominal NC 30A LRA / 12A FLA, 250VAC, Definite Purpose 30x103 Max. coil temperature 155°C NC 1HP, 277VAC (CO type only) 50x103 Coil insulation system according UL Class F Coil versions, DC coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10% mW 5 5 3.75 0.5 28 900 9 9 6.75 0.9 90 900 12 12 9 1.2 160 900 15 15 11.25 1.5 249 900 18 18 13.5 1.8 360 900 22 22 16.5 2.2 538 900 24 24 18 2.4 640 900 48 48 36 4.8 2,560 900 110 110 82.5 11 13,444 900 All figures are given for coil without preenergization, at ambient temperature +23°C. 1) Contact ratings at 40°C (unless otherwise noted) with relay properly vented. Remove vent nib after soldering and cleaning. 11-2017, Rev. 1117 www.te.com © 2017 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose Relays Power Relays T9G series, DC coil 30A PCB Relay Coil Data (continued) Potter & Brumfield (Continued) Insulation Data Initial dielectric strength between open contacts between contact and coil Initial surge withstand voltage between contact and coil Initial insulation resistance between insulated elements Clearance/creepage between contact and coil 1500Vrms 4000Vrms 8kV 1x109Ω, 500VDC 6.4mm / 9.5mm (UL), 8mm / 8mm (IEC) Other Data 2 PCB layout Bottom view on pins T9G - Mounting and termination code 1 Only necessary terminals are present on single throw models. Consequently, some holes will be unnecessary for single throw models. 11-2017, Rev. 1117 www.te.com © 2017 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature DC coil Storage -55°C to +130°C Operating -40 to + 1 05°C at reduced current Category of environmental protection IEC 61810 RTII - flux proof RTIII - wash tight Vibration resistance (functional) Opening NO contact >10g Opening NC contact >7g Shock resistance (functional) 10g for 11msec Shock resistance (destructive) 100g Terminal type pcb-tht and pcb-tht + quick connect Weight 18g mounting code 1 23g mounting code 2 Resistance to soldering heat THT IEC 60068-2-20 250°C Packaging/unit 10/tube, 420/box (PCB + QC), 500/box (PCB) T9G - Mounting and termination code 2 Only necessary terminals are present on single throw models. Consequently, some holes will be unnecessary for single throw models. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. General Purpose Relays Power Relays Potter & Brumfield T9G series, DC coil 30A PCB Relay (Continued) Dimensions Mounting and termination code 1 Mounting and termination code 2 1 Form C (CO) 1 Form A (NO) 1 Form B (NC) Notes: 1) General tolerance Diagram Dimensions 3mm Tolerance ±0.1 ±0.2 mm ±0.3 2) Dimensions of the pins after tin soldering for PCB type a) +0.2 for the widht and thickness b) +0.5 mm for the lenght Product code structure Type T9G T9G Typical product code S 5 L 2 4 -12 Power PCB or panel mount relay T9G Enclosure S Wash-tight plastic case with knock off nib (requires mounting code 1 or 2) V Flux-proof plastic case (requires mounting code 1 or 2) Contact arrangement 1 1 form A (1 NO) 2 1 form B (1 NC) 5 1 form C (1 CO) Coil Input L DC voltage, 900mW Mounting and termination 1 PCB mounting; PCB terminals for coil and contacts 2 PCB mounting; PCB term. for coil and contacts; 6.35mm (.250in) quick connect for contacts (only available with enclosure code N, S or V) Contact material 4 AgSnO (RoHS compliant) Coil voltage Coil code: please refer to coil versions table 11-2017, Rev. 1117 www.te.com © 2017 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 3 General Purpose Relays Power Relays Potter & Brumfield T9G series, DC coil 30A PCB Relay Product Code T9GV5L14-5 Enclosure Contacts Mounting Contact Material Coil Part Number Flux-proof plastic case (requires mounting code 1 or 2) 1 CO pcb terminals AgSnO 5VDC 1558660-1 AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO 9VDC 12VDC 15VDC 18VDC 22VDC 24VDC 48VDC 110VDC 1558660-2 1558660-3 1558660-4 1558660-5 1558660-6 1558660-7 1558660-8 1558660-9 AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO 5VDC 9VDC 12VDC 15VDC 18VDC 22VDC 24VDC 48VDC 110VDC 5VDC 9VDC 12VDC 15VDC 18VDC 22VDC 24VDC 48VDC 110VDC 5VDC 9VDC 1558661-1 1558661-2 1558661-3 1558661-4 1558661-5 1558661-6 1558661-7 1558661-8 1558661-9 1558662-1 1558662-2 1558662-3 1558662-4 1558662-5 1558662-6 1558662-7 1558662-8 1558662-9 1558670-1 1558670-2 AgSnO AgSnO AgSnO AgSnO 12VDC 15VDC 18VDC 22VDC 1558670-3 1558670-4 1558670-5 1558670-6 T9GV5L14-9 T9GV5L14-12 T9GV5L14-15 T9GV5L14-18 T9GV5L14-22 T9GV5L14-24 T9GV5L14-48 T9GV5L14-110 T9GV1L14-5 T9GV1L14-9 T9GV1L14-12 T9GV1L14-15 T9GV1L14-18 T9GV1L14-22 T9GV1L14-24 T9GV1L14-48 T9GV1L14-110 T9GV2L14-5 T9GV2L14-9 T9GV2L14-12 T9GV2L14-15 T9GV2L14-18 T9GV2L14-22 T9GV2L14-24 T9GV2L14-48 T9GV2L14-110 T9GV5L24-5 T9GV5L24-9 1 NO 1 NC 1 CO pcb + QC T9GV5L24-12 T9GV5L24-15 T9GV5L24-18 T9GV5L24-22 T9GV2L24-24 4 (Continued) AgSnO 24VDC 1558672-7 T9GV2L24-48 AgSnO 48VDC 1558672-8 T9GV2L24-110 AgSnO 110VDC 1558672-9 11-2017, Rev. 1117 www.te.com © 2017 Tyco Electronics Corporation, a TE Connectivity Ltd. company 1 NC Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. General Purpose Relays Power Relays Potter & Brumfield T9G series, DC coil 30A PCB Relay Product Code T9GS5L14-5 (Continued) Enclosure Contacts mounting Contact Material Coil Part Number Wash-tight plastic case with knock off nib (requires mounting code 1 or 2) 1 CO pcb terminals AgSnO 5VDC 1558665-1 pcb + QC AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO AgSnO 9VDC 12VDC 15VDC 18VDC 22VDC 24VDC 48VDC 110VDC 5VDC 9VDC 12VDC 15VDC 18VDC 22VDC 24VDC 48VDC 110VDC 5VDC 9VDC 12VDC 15VDC 18VDC 22VDC 24VDC 48VDC 110VDC 5VDC 9VDC 12VDC 15VDC 18VDC 22VDC 24VDC 48VDC 110VDC 5VDC 9VDC 12VDC 15VDC 18VDC 22VDC 24VDC 48VDC 110VDC 5VDC 9VDC 12VDC 15VDC 18VDC 22VDC 24VDC 48VDC 110VDC 1558665-2 1558665-3 1558665-4 1558665-5 1558665-6 1558665-7 1558665-8 1558665-9 1558666-1 1558666-2 1558666-3 1558666-4 1558666-5 1558666-6 1558666-7 1558666-8 1558666-9 1558667-1 1558667-2 1558667-3 1558667-4 1558667-5 1558667-6 1558667-7 1558667-8 1558667-9 1558675-1 1558675-2 1558675-3 1558675-4 1558675-5 1558675-6 1558675-7 1558675-8 1558675-9 1558676-1 1558676-2 1558676-3 1558676-4 1558676-5 1558676-6 1558676-7 1558676-8 1558676-9 1558677-1 1558677-2 1558677-3 1558677-4 1558677-5 1558677-6 1558677-7 1558677-8 1558677-9 T9GS5L14-9 T9GS5L14-12 T9GS5L14-15 T9GS5L14-18 T9GS5L14-22 T9GS5L14-24 T9GS5L14-48 T9GS5L14-110 T9GS1L14-5 T9GS1L14-9 T9GS1L14-12 T9GS1L14-15 T9GS1L14-18 T9GS1L14-22 T9GS1L14-24 T9GS1L14-48 T9GS1L14-110 T9GS2L14-5 T9GS2L14-9 T9GS2L14-12 T9GS2L14-15 T9GS2L14-18 T9GS2L14-22 T9GS2L14-24 T9GS2L14-48 T9GS2L14-110 T9GS5L24-5 T9GS5L24-9 T9GS5L24-12 T9GS5L24-15 T9GS5L24-18 T9GS5L24-22 T9GS5L24-24 T9GS5L24-48 T9GS5L24-110 T9GS1L24-5 T9GS1L24-9 T9GS1L24-12 T9GS1L24-15 T9GS1L24-18 T9GS1L24-22 T9GS1L24-24 T9GS1L24-48 T9GS1L24-110 T9GS2L24-5 T9GS2L24-9 T9GS2L24-12 T9GS2L24-15 T9GS2L24-18 T9GS2L24-22 T9GS2L24-24 T9GS2L24-48 T9GS2L24-110 1 NO 1 NC 1 CO 1 NO 1 NC Note. This list represents the most common types and does not show all variants covered by this datasheet. Other types on request. 5 11-2017, Rev. 1117 www.te.com © 2017 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.