T9SV1K15-12S.

General Purpose Relays Power Relays Potter & Brumfield Power PCB Relay T9S Solar n 1 pole 35A, 1 form A (NO) contact gap >1.5mm (standard), >1.8mm (suffix S) n 350mW hold power n Ambient temperature up to 85°C at 35A n The appliance is able to meet VDE V 0126-1-1 n Product in accordance to IEC 60335-1 n EN61095: AC7a at 85°C n Contact Typical applications Photovoltaic inverter U f0156_bc_inv voltage to 4.7...6.0 VDC. All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. Approvals VDE 40030974, UL E58304 Technical data of approved types on request Contact Data Contact arrangement 1 form A (NO) Contact gap >1.5mm (standard), >1.8mm (suffix S) Rated voltage 250VAC (1.8mm gap), 277VAC (1.5mm gap) Rated current 35A1) Breaking capacity max. 8750 VA Contact material AgNi Initial contact resistance 75mΩ max. at 1A 6VDC Frequency of operation, with/without load 6/300min-1 Operate/release time max., incl bounce time 18/15ms Contact ratings2) Type Contact IEC 61810 T9SV1K15-12 A (NO) T9SV1K15-12S A (NO) UL 508 T9SV1K15-12 A (NO) T9SV1K15-12S A (NO) Load Cycles 35A, 250VAC, cosφ=1, 85°C 35A, 250VAC, cosφ=1, 85°C 30x103 20x103 35A, 277VAC, resistive, 85°C 35A, 250VAC, resistive, 85°C 30x103 20x103 Mechanical endurance, DC coil 1x106 operations 1) The relay connections and wiring have to be designed with an adequate cross sections to ensure the current flow and heat dissipation. 2) Contact ratings with relay properly verted. Coil Data Rated coil voltage Coil insulation system according UL 12VDC class F Insulation Data Initial dielectric strength between open contacts between contact and coil Clearance/creepage between contact and coil Material group of insulation parts Tracking index of relay base 2500Vrms 4000Vrms 3/4mm III PTI 325 Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40 to +85°C1) Category of environmental protection IEC 61810 RTII - flux proof Vibration resistance (functional) 10g Shock resistance (functional) 10g Shock resistance (destructive) 100g Terminal type PCB-THT Mounting see note1) Mounting distance ≥10mm Weight appr. 30g Resistance to soldering heat THT IEC 60068-2-20 260°C/5s Packaging unit box/500 pcs. 1) The relay connections and wiring have to be designed with an adequate cross sections to ensure the current flow and heat dissipation. Coil versions, DC coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10% W 12 122) 9.6 0.8 64+10% 2.25 / min. 0.35 hold 2) After the energization time of 50 ms with 12 VDC the coil requires a reduction of the coil 06-2015, Rev. 0615 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose Relays Power Relays Potter & Brumfield Power PCB Relay T9S Solar (Continued) Dimensions PCB layout / terminal assignment Bottom view on solder pins Notes 1) General tolerance Diagram Dimension < 1 mm 1 ~ 3 mm > 3 mm Tolerance ±0.1 ±0.2 ±0.3 2) Dimensions of the pins after tin soldering a) +0.4 for the width and the thickness b) +1.0 for the length Product code T9SV1K15-12 T9SV1K15-12S 2 Version PCB, flux tight PCB, flux tight Contact arrangement 1 form A (NO) contact 1 form A (NO) contact Contact material AgNi AgNi Contact gap >1.5mm >1.8mm Coil 12VDC 12VDC Part Number 2027395-1 2027395-3 06-2015, Rev. 0615 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.