TMS-SCE-2X-1K-3/16-4

  TMS-SCE and TMS-SCE-2X H E AT S H R I N K I D E N T I F I C AT I O N S Y S T E M Technical Datasheet TTDS-023 Revision 7 - May 2017 TMS-SCE Military Grade, Heat Shrink Identification Marker Sleeving, for the identification of wire and cables. Made from durable, flame retarded, radiation cross linked heat shrinkable polyolefin. Supplied in ‘ladder format’, sleeves are presented for ease of printing and kitting. TMS-SCE is a thin wall, light weight, fast recovery 3:1 shrink ratio sleeve, allowing the customer to cover a wide range of cable diameters. TMS-SCE-2X is a thicker, rugged wall, 2:1 shrink ratio sleeve, which can aid with handling and installation. Suitable for a wide variety of applications, including aerospace, military, industrial and energy. Marker sleeves meet the mark permanence requirements of AS5942 and MIL 202 Method 215 TMS-SCE meets the material performance requirements of the AMS SAE DTL 23053/5 specification. TMS-SCE-2X sleeves are fabricated from AMS SAE DTL 23053/5 class 1 and 3 tubing. TMS-SCE and TTMS Heat Shrink Identification products are available as part of a complete identification system. The system comprises specific printers, thermal transfer ribbons and WINTOTAL software.     PAGE 1 /// TTDS-023 TMS-SCE TECHNICAL DATA SHEET   TMS-SCE MILITARY GRADE Features  Self-extinguishing, non-flame propagating Product Compliance  Resistant to key Military and Aerospace fluids (defined by RW-2511)  Military grade performance  Can be laser marked for superior performance  Pre-termination Cable Identification  Sleeve diameters from 2.4mm to 57.15mm TMS-SCE fully complies with 2011/65/EU RoHS II directive, and Regulation (EC) number 1907/2006 (REACH) Further information and a downloadable declaration covering RoHS and REACH compliance can be found at the TE Product Compliance Support Centre: http://www.te.com/usa-en/utilities/productcompliance.html (3/32 to 2 1/4)  TMS-SCE (3:1 Shrink ratio)  TMS-SCE-2X (2:1 shrink ratio) Temperature Rating Shelf Life  –55°C to 135°C (-67°F to 275°F)  Refer to TE document 408-121006 Cable Identification Shelf Life Document Industry Specifications / Approvals TE Connectivity Standard RW-2511 Specification for TMS-SCE products Rail EN45545-2, Railway applications - Fire protection on railway vehicles, Part 2: Requirements for fire behaviour of materials and components Fire Hazard Classification 1, 2 and 3, in accordance with requirement set R24 NFPA 130 Standard for Fixed Guideway Transit and Passenger Rail Systems, Fire protection requirements, Interior Fire Propagation Resistance Federal Railroad Administration, DOT, Appendix B to Part 238, Test Methods and Performance Criteria for the Flammability and Smoke Emission Characteristics of Materials used in Passenger Cars and Locomotive Cabs SHAZAINENNSHI, Japan Railway Rolling Stock & Machinery Association 2003 Classification ‘Flame Retardant’ Serial number 2015-163K Military SAE-AMS-23053/5 Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Semi-Rigid, Crosslinked.   Industrial TMS-SCE Class 1 Material performance TMS-SCE-2X fabricated from Class 1 and 3 tubing CSA Standard C22.2 No 198.1 Class Number 9032-01 INSULATING DEVICES AND MATERIALS-Insulating Tubing and Sleeving, File reference 31929 UL Certification, Tubing, Extruded Insulating Component File reference YDPU2.E35586     PAGE 2 /// TTDS-023 TMS-SCE TECHNICAL DATA SHEET   TMS-SCE (-2X) Military Grade Heat Shrink Identification Sleeve Part Description     TMS-SCE                                                                                                 -2.0 -S1 -9                                                                       9     S1     2.0     1/4                                                         1K Pack Size       TMS-SCE Product Family             -1K -1/4 Colour   Scoring (Optional) Sleeve Length (inches) Expanded Inside Diameter (inches) Available Options Pre-scoring Perforated score to produce multiple marker sleeves from each sleeve 1 Pre-score Code S1 2 Pre-scores Code S2 Code S3 3 Pre-scores Packaging sizes 250 pieces 0.5 500 pieces 1K 1000 pieces 2.5K 2500 pieces 5K 5000 pieces TMS-SCE TMS-SCE-2X Available for all sizes 3/8 to 3/4 3/4 and above All Sizes All Sizes All Sizes 3/32 to 3/8 Not available 3/32 to 3/8 Not available Colours Black Pink Red Orange Yellow (TMS-SCE) 0 2L 2 3 4 Green Blue Violet Grey White 5 6 7 8 9 Specify product name, pack size (leave blank if 250 pieces are required), sleeve size, sleeve length, pre-score (leave blank if not required) and colour Dimensions in mm (inches) Ordering Example: TMS-SCE-1K-1/4-2.0-S1-9 To maximise print contrast, colours are based on pastel shades. TMS-SCE-2X is available in White only.     PAGE 3 /// TTDS-023 TMS-SCE TECHNICAL DATA SHEET                         TMS-SCE (-2X) Military Grade Heat Shrink Identification Sleeve Inside diameter Ordering description As supplied (minimum) Recovered After recovery Wall Thickness Weight (Maximum) mm inches mm inches mm TMS-SCE - - 3/32 – 2.0 - - 2.36 0.093 0.79 0.031 0.53 0.166 0.81 to 1.90 0.032 to 0.075 TMS-SCE - - 1/8 – 2.0 - - 3.18 0.125 1.07 0.042 0.58 0.211 1.11 to 2.66 0.044 to 0.105 TMS-SCE - - 3/16 – 2.0 - - 4.75 0.187 1.57 0.062 0.58 0.273 1.75 to 4.06 0.069 to 0.160 TMS-SCE - - 1/4 – 2.0 - - 6.35 0.250 2.11 0.083 0.58 0.358 2.31 to 5.46 0.091 to 0.215 TMS-SCE - - 3/8 – 2.0 - - 9.53 0.375 3.18 0.125 0.61 0.489 3.47 to 8.12 0.137 to 0.320 TMS-SCE - - 1/2 – 2.0 - - 12.70 0.500 4.22 0.166 0.61 0.661 4.64 to 10.79 0.183 to 0.425 TMS-SCE - - 3/4 – 2.0 - - 19.05 0.750 6.35 0.250 0.64 0.957 6.99 to 16.25 0.275 to 0.640 TMS-SCE - - 1 – 2.0 - - 25.40 1.000 8.46 0.333 0.64 1.215 9.29 to 21.59 0.366 to 0.850 TMS-SCE - - 1 1/2 – 2.0 - - 38.10 1.500 19.05 0.750 0.51 2.163 20.95 to 33.02 0.825 to 1.300 TMS-SCE - - 2 – 2.0 - - 50.80 2.000 25.40 1.000 0.64 2.379 27.94 to 44.95 1.100 to 1.770 TMS-SCE - - 2 1/4 – 2.0 - - 57.15 2.250 19.05 0.750 0.76 3.763 22.32 to 50.80 0.879 to 2.000 TMS-SCE-2X - - 3/32 – 2.0 - - 2.36 0.093 1.17 0.046 0.64 1.270 1.90 to 0.050 0.050 to 0.075 TMS-SCE-2X - - 1/8 – 2.0 - - 3.18 0.125 1.58 0.062 0.64 1.750 2.66 to 0.069 0.069 to 0.105 TMS-SCE-2X - - 3/16 – 2.0 - - 4.75 0.187 2.36 0.093 0.64 2.540 4.06 to 0.100 0.100 to 0.160 TMS-SCE-2X - - 1/4 – 2.0 - - 6.35 0.250 3.18 0.125 0.64 3.810 5.46 to 0.150 0.150 to 0.215 TMS-SCE-2X - - 3/8 – 2.0 - - 9.53 0.375 4.75 0.187 0.64 5.590 8.12 to 0.220 0.220 to 0.320 TMS-SCE-2X - - 1/2 – 2.0 - - 12.70 0.500 6.35 0.250 0.64 6.990 10.79 to 0.275 0.275 to 0.425 TMS-SCE-2X - - 3/4 – 2.0 - - 19.05 0.750 9.53 0.375 0.76 10.16 16.25 to 0.400 0.400 to 0.640     PAGE 4 /// TTDS-023 TMS-SCE TECHNICAL DATA SHEET g Cable Diameter Recommended use range mm inches   TMS-SCE (-2X) Military Grade Heat Shrink Identification Sleeve Printer Information Print quality and print performance can only be guaranteed when specific TE printer and ribbons are used. The current list of printers and ribbons can be found in TE document 411-121005 ‘Identification Printer Product Ribbon Matrix’. This document can be found in ‘Access Our Tools’: http://www.te.com/usa-en/utilities/access-product-toolsand-resources.html Software WINTOTAL software, available to download for a 14 day evaluation period from the Identification Printer Software page: http://www.te.com/usa-en/products/identification-labeling/ printers-software.html Contact a TE representative for further information www.te.com/rail TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2017 TE Connectivity Ltd. family of companies All Rights Reserved.     PAGE 5 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 /// TTDS-023 TMS-SCE TECHNICAL DATA SHEET