TTMS-3.2-9

TTMS (-MP) and TTMS-2X H E AT S H R I N K I D E N T I F I C AT I O N S Y S T E M Technical Datasheet TTDS-050 Revision 6 - June 2021 TTMS Military Grade, Heat Shrink Identification tubing, for the identification of wire and cables. Made from durable, flame retarded, radiation cross linked heat shrinkable polyolefin. Supplied in ‘Continuous’, format for ease of printing and kitting. TTMS and TTMS-MP is a thin wall, light weight, fast recovery 3:1 shrink ratio sleeve, allowing the customer to cover a wide range of cable diameters. –MP (More Puffy) tube has a more open profile to aid installation. TTMS-2X is a thicker, rugged wall, 2:1 shrink ratio sleeve, which can aid with handling and installation. Suitable for a wide variety of applications, including aerospace, military, industrial and energy. Marker sleeves meet the mark permanence requirements of AS5942 and MIL 202 Method 215 TTMS and TTMS-MP meets the material performance requirements of the AMS SAE DTL 23053/5 specification. TTMS-2X is fabricated from AMS SAE DTL 23053/5 class 1 and 3 tubing. TTMS and TMS-SCE Heat Shrink Identification products are available as part of a complete identification system. The system comprises specific printers, thermal transfer ribbons and WINTOTAL software. PAGE 1 /// TTDS-050 TTMS (-2X) & TTMS-MP TECHNICAL DATA TTMS (-MP) & TTMS-2X HEAT SHRINK CABLE IDENTIFICATION SYSTEM Features • Self-extinguishing, non-flame propagating Product Compliance • Resistant to key Military and Aerospace fluids (defined by RW-2511) • Military grade performance • Can be laser marked for superior performance • Pre-termination Cable Identification TTMS fully complies with Directive (EU) 2015/863 (amendment to Annex II of EU RoHS 2 Directive 2011/65/EU), and Regulation (EC) number 1907/2006 (REACH) • Further information and a downloadable declaration covering RoHS and REACH compliance can be found at the TE Product Compliance Support Centre: http://www.te.com/usa-en/utilities/productcompliance.html • Sleeve diameters from 2.4mm to 50.8mm (3/32 to 2inch) • TTMS (3:1 Shrink ratio except 38.1 and 50.8mm) • TTMS-2X (2:1 shrink ratio) Temperature Rating Shelf Life • –55°C to 135°C (-67°F to 275°F) • Refer to TE document 408-121006 Cable Identification Shelf Life Document Industry Specifications / Approvals TE Connectivity Standard RW-2511 Specification for TTMS products Rail EN45545-2, Railway applications - Fire protection on railway vehicles, Part 2: Requirements for fire behaviour of materials and components Hazard Level 1 and 2, in accordance with requirement set R24 NFPA 130 Standard for Fixed Guideway Transit and Passenger Rail Systems, Fire protection requirements, Interior Fire Propagation Resistance Federal Railroad Administration, DOT, Appendix B to Part 238, Test Methods and Performance Criteria for the Flammability and Smoke Emission Characteristics of Materials used in Passenger Cars and Locomotive Cabs SHAZAINENNSHI, Japan Railway Rolling Stock & Machinery Association 2003 Classification ‘Flame Retardant’ Serial number 2015-163K Military SAE-AMS-23053/5 Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Semi-Rigid, Crosslinked. • • Industrial TTMS Class 1 Material performance TTMS-2X Class 1 and 3 Material performance CSA Standard C22.2 No 198.1 Class Number 9032-01 INSULATING DEVICES AND MATERIALS-Insulating Tubing and Sleeving, File reference 31929 UL Certification, Tubing, Extruded Insulating Component File reference YDPU2.E35586 PAGE 2 /// TTDS-050 TTMS (-2X) & TTMS-MP TECHNICAL DATA TTMS (-MP) & TTMS-2X HEAT SHRINK CABLE IDENTIFICATION SYSTEM Part Description TTMS -6.4 -9 9 Colour 6.4 Expanded Inside Diameter TTMS Product Family Available Options Spool Size Colors Spool does not fit inside printers, recommend TE Connectivity PRINTERUNIVERSAL-REEL-HOLDER, Part Number EC9926-000, reference TTDS-259 Standard Yellow White 4 9 Code Other colours available on request Brown Red Orange Green Blue Violet Grey Black 1 2 3 5 6 7 8 0 To maximise print contrast, colours are based on pastel shades. Ordering Example: TTMS-6.4-9 i.e. Product Family, Expanded Inside Diameter, Colour PAGE 3 /// TTDS-050 TTMS (-2X) & TTMS-MP TECHNICAL DATA TTMS (-MP) & TTMS-2X HEAT SHRINK CABLE IDENTIFICATION SYSTEM Ordering Information Inside diameter Ordering description As supplied (minimum) Cable Diameter Recommended use range After recovery (Maximum) mm inches mm inches TTMS-(MP) - 2.4 – 2.4 0.093 0.8 0.031 0.8 to 1.9 0.032 to 0.075 TTMS-(MP) - 3.2 – 3.2 0.125 1.1 0.042 1.1 to 2.6 0.044 to 0.105 TTMS-(MP) - 4.8 – 4.8 0.187 1.6 0.062 1.7 to 4.0 0.069 to 0.160 TTMS-(MP) - 6.4 – 6.4 0.250 2.1 0.083 2.3 to 5.4 0.091 to 0.215 TTMS-(MP) - 9.5 – 9.5 0.375 3.2 0.125 3.4 to 8.1 0.137 to 0.320 TTMS-(MP) - 12.7 – 12.7 0.500 4.2 0.166 4.6 to 10.7 0.183 to 0.425 TTMS-(MP) - 19.0 – 19.0 0.750 6.4 0.250 6.9 to 16.2 0.275 to 0.640 TTMS-(MP) - 25.4 – 25.4 1.000 8.4 0.333 9.2 to 21.5 0.366 to 0.850 TTMS-(MP) - 38.1 – 38.1 1.500 19.0 0.750 20.9 to 33.0 0.825 to 1.300 TTMS-(MP) - 50.8 – 50.8 2.000 25.4 1.000 27.9 to 44.9 1.100 to 1.750 TTMS -2X - 2.4 – 2.4 0.093 1.2 0.046 1.2 to 1.90 0.050 to 0.075 TTMS -2X - 3.2 – 3.2 0.125 1.6 0.062 1.1 to 2.60 0.044 to 0.105 TTMS -2X - 4.8 – 4.8 0.187 2.4 0.093 1.7 to 4.0 0.069 to 0.160 TTMS -2X - 6.4 – 6.4 0.250 3.2 0.125 2.3 to 5.4 0.091 to 0.215 TTMS -2X - 9.5 – 9.5 0.375 4.7 0.187 3.4 to 8.1 0.137 to 0.320 TTMS -2X - 12.7 – 12.7 0.500 6.3 0.25 4.6 to 10.7 0.183 to 0.425 TTMS -2X - 19.1 – 19.0 0.750 9.5 0.375 6.9 to 16.2 0.275 to 0.640 TTMS -2X - 25.4 – 25.4 1.000 12.7 0.500 13.3 to 23.0 0.524 to 0.906 PAGE 4 /// TTDS-050 TTMS (-2X) & TTMS-MP TECHNICAL DATA mm inches TTMS (-MP) & TTMS-2X HEAT SHRINK CABLE IDENTIFICATION SYSTEM Printer Information Print quality and print performance can only be guaranteed when specific TE printer and ribbons are used. The current list of printers and ribbons can be found in TE document 411-121005 ‘Identification Printer Product Ribbon Matrix’. This document can be found on the ‘Printers, Software & Accessories’ webpage: https://www.te.com/usa-en/products/identificationlabeling/printers-software-and-accessories/printers.html? tab=pgp-story Software WINTOTAL software, available to download for a 14 day evaluation period from the Identification Printer Software page: http://www.te.com/usa-en/products/identification-labeling/ printers-software.html Contact a TE representative for further information www.te.com TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2021 TE Connectivity Ltd. family of companies All Rights Reserved. PAGE 5 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 /// TTDS-050 TTMS (-2X) & TTMS-MP TECHNICAL DATA