TX15AB00-1208

7 ANTI-ROTATIONAL SET SCREW TINEL LOCK RING 3 CODE 15 - TINEL-LOCK BACKSHELL TXR15AB00-1608AISERIES TXR: RING INCLUDED (SEE RING OPTION) TX: RING NOT INCLUDED CONNECTOR INTERFACE MATERIAL REFER TO CH00-0250-008 FINISH REFER TO CH00-0250-008 ANGLE DASH NUMBER (TABLE 1) ENTRY SIZE (TABLE 2) RING OPTION AI - TO SUIT SINGLE BRAID BI - TO SUIT DOUBLE BRAID FOR TX, LEAVE BLANK MODIFICATION CODE REFER TO CH00-0250-008 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD AND A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-008. 3. SEE DRAWING TR FOR DETAIL ON TINEL-LOCK RING, RINGS ARE DESIGNED TO BE HEATED ELECTRICALLY, ALL RINGS ARE MARKED WITH THERMOCHROMIC PAINT WHICH CHANGES COLOUR WHEN INSTALLATION TEMPERATURE IS REACHED. 4. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER LESS RING DESIGNATOR. (e.g. 06090-TXR15AB00-1206). RING SHALL BEAR NO MARKING. 5. IF MAX ENTRY IS EXCEEDED, A 2 PIECE BACKSHELL ASSEMBLY (TYPE 2) IS SUPPLIED. 6. BACKSHELL MATES TO MIL-C-5015, SOLDER CONTACT, MS3100, MS3101, MS3106, MS3107 AND MS3108 WITH ENDBELL. 7. ANTI-ROTATIONAL SET SCREW, THREE THREADED HOLES 120° ± 5° APART, SINGLE MATING SET SCREW SUPPLIED. DRAWN K.WINCZURA DATE CHECKED 04/12/2014 APPROVED K.SHEPPARD 11/12/2014 APPROVED H.SMITH 3RD ANGLE PROJECTION NOT TO SCALE 04/12/2014 07/07/2015 REVISIONS LTR DESCRIPTION E REVISED PER ECO-15-009981 F REVISED PER ECO-18-002419 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 07/07/2015 APPROVED H.SMITH 03/04/2018 D.JONES TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: MIL-C-5015 MS "V" THREAD END BELLS TE CONNECTIVITY - POLAMCO LTD RESERV ES TH E RIGH T TO AMEND TH IS DRAW ING AND THE INFORMATIO N SET FORTH HEREON AT ANY T IME. USERS SH OULD IND EPENDENTLY EVALUATE TH E SUITABILITY OF THE PRODUCT FOR TH EIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR15 F 1 IF MAX ENTRY IS EXCEEDED BACKSHELL WILL BE SUPPLIED AS TYPE 2 19,50 `0,50 XXXX A THREAD ØB ØK ØY ØS ØZ XXXX PART MARK HERE 26,50 25,00 A THREAD ØB SILICONE O-RING PART MARK HERE 5 STRAIGHT BACKSHELL - TYPE 2 STRAIGHT BACKSHELL - TYPE 1 19,50 `0,50 F C G D 45° BACKSHELL - TYPE 2 45° BACKSHELL - TYPE 1 H 19,50 `0,50 W M J E T 90° BACKSHELL - TYPE 1 90° BACKSHELL - TYPE 2 W H 19,50 `0,50 T E J M 90° BACKSHELL - TYPE 1 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE DRAWN K.WINCZURA DATE CHECKED 04/12/2014 APPROVED K.SHEPPARD 11/12/2014 APPROVED H.SMITH 3RD ANGLE PROJECTION NOT TO SCALE 04/12/2014 07/07/2015 REVISIONS LTR DESCRIPTION E REVISED PER ECO-15-009981 F REVISED PER ECO-18-002419 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 07/07/2015 APPROVED H.SMITH 03/04/2018 D.JONES TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 90° BACKSHELL - TYPE 2 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: MIL-C-5015 MS "V" THREAD END BELLS TE CONNECTIVITY - POLAMCO LTD RESERV ES TH E RIGH T TO AMEND TH IS DRAW ING AND THE INFORMATIO N SET FORTH HEREON AT ANY T IME. USERS SH OULD IND EPENDENTLY EVALUATE TH E SUITABILITY OF THE PRODUCT FOR TH EIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR15 F 2 TABLE 1 ORDER SHELL A THREAD NUMBER SIZE 03 8S & 10S 1/2-28UNEF 10SL,12 & 12S 5/8-24UNEF 04 06 14 & 14S 3/4-20UNEF 08 16 & 16S 7/8-20UNEF 10 18 1-20UNEF 12 20 & 22 1 3/16-18UNEF 16 24 & 28 1 7/16-18UNEF 20 32 1 3/4-18UNS 24 36 2-18UNS 28 40 2 1/4-16UN TABLE 2 ENTRY SIZE 04 05 06 07 08 10 12 14 16 18 20 22 24 ØZ MIN 6,35 7,92 9,53 11,10 12,70 15,88 19,05 22,23 25,40 28,58 31,75 34,93 38,10 ØS 9,49 +/-0,04 11,06 +/-0,04 12,66 +/-0,04 14,21 +/-0,07 15,81 +/-0,07 18,96 +/-0,08 22,14 +/-0,08 25,30 +/-0,08 28,48 +/-0,08 31,65 +/-0,08 34,83 +/-0,08 37,98 +/-0,08 41,15 +/-0,08 DATE MAX ENTRY 05 07 08 10 12 16 20 24 24 24 04/12/2014 APPROVED K.SHEPPARD 11/12/2014 07/07/2015 REVISIONS LTR DESCRIPTION E REVISED PER ECO-15-009981 F REVISED PER ECO-18-002419 ØY ±0,3 14,00 15,50 17,10 18,70 20,30 23,50 26,70 29,80 33,00 36,20 39,40 42,50 45,70 3RD ANGLE PROJECTION NOT TO SCALE 04/12/2014 CHECKED H.SMITH ØB MAX 21,5 25,0 28,0 31,1 35,0 39,0 45,2 54,9 62,0 68,6 C ±0,5 12,6 14,0 15,0 15,6 16,3 17,2 17,9 24,3 26,9 31,8 D ±0,5 27,5 28,0 29,0 29,7 30,5 30,9 32,1 32,1 29,3 30,7 W ±0,5 21,7 24,9 27,9 31,3 34,3 40,4 46,5 53,3 57,8 64,4 T ±0,5 13,5 15,9 17,9 19,3 21,3 22,9 27,0 30,7 32,8 36,5 E MAX 28,5 30,0 31,5 33,2 34,8 36,3 39,4 43,3 47,3 51,5 T ±0,5 15,0 16,5 17,9 20,1 21,3 22,9 27,0 32,0 34,8 38,9 W MAX 22,2 25,4 28,4 31,8 34,8 40,9 44,5 50,8 58,3 64,9 E MAX 28,5 30,0 31,5 33,2 34,8 36,3 39,4 43,3 47,3 51,5 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE DRAWN K.WINCZURA APPROVED THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 07/07/2015 APPROVED H.SMITH 03/04/2018 D.JONES TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 ØK MAX NA NA 21,0 21,0 24,5 29,0 32,5 35,5 37,0 40,0 43,5 48,5 52,1 F ±0,5 NA NA 12,5 12,5 13,1 13,5 14,5 15,5 16,1 16,5 17,0 18,5 21,9 G ±0,5 NA NA 27,5 27,5 28,0 29,0 29,7 30,5 30,9 31,1 32,1 35,3 38,1 H ±0,5 NA NA 24,0 24,0 27,0 31,0 34,0 35,0 38,0 42,0 45,0 54,5 58,0 M ±0,5 NA NA 15,5 15,5 17,0 19,5 21,0 20,0 21,5 24,0 25,5 31,0 33,0 J ±0,5 NA NA 27,95 27,95 29,45 31,00 32,70 34,25 35,80 37,40 38,90 42,00 46,00 H ±0,5 NA NA 24,3 24,3 28,3 31,1 34,2 38,5 40,7 43,7 46,4 50,0 53,5 M ±0,5 NA NA 17,2 17,2 19,4 21,0 22,8 25,3 26,1 27,6 29,1 31,0 33,0 J ±0,5 NA NA 28,2 28,2 29,7 31,2 32,9 34,5 36,1 37,6 39,1 42,0 46,0 TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: MIL-C-5015 MS "V" THREAD END BELLS TE CONNECTIVITY - POLAMCO LTD RESERV ES TH E RIGH T TO AMEND TH IS DRAW ING AND THE INFORMATIO N SET FORTH HEREON AT ANY T IME. USERS SH OULD IND EPENDENTLY EVALUATE TH E SUITABILITY OF THE PRODUCT FOR TH EIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR15 F 3