TX78AB90-2010

TINEL LOCK RING 3 CODE 78 - TINEL-LOCK BACKSHELL TXR78AB00-1608AISERIES TXR: RING INCLUDED (SEE RING OPTION) TX: RING NOT INCLUDED CONNECTOR INTERFACE MATERIAL REFER TO CH00-0250-008 FINISH REFER TO CH00-0250-008 ANGLE DASH NUMBER (TABLE 1) ENTRY SIZE (TABLE 2) RING OPTION AI - TO SUIT SINGLE BRAID BI - TO SUIT DOUBLE BRAID FOR TX, LEAVE BLANK MODIFICATION CODE SEE CH00-0250-008 FOR OPTIONS 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD AND A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-008. 3. SEE DRAWING TR FOR DETAIL ON TINEL-LOCK RING, RINGS ARE DESIGNED TO BE HEATED ELECTRICALLY, ALL RINGS ARE MARKED WITH THERMOCHROMIC PAINT WHICH CHANGES COLOUR WHEN INSTALLATION TEMPERATURE IS REACHED. 4. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER LESS RING DESIGNATOR. (e.g. 06090-TXR78AB00-1810). RING SHALL BEAR NO MARKING. 5. WHEN ENTRY SIZE EXCEEDS "MAX ENTRY", A 2 PIECE ADAPTER (TYPE II) IS SUPPLIED. 6. BACKSHELL MATES TO BS9522 F0032 (PATT121B) CONNECTORS; ONLY MANUFACTURED BY AB CONNECTORS LTD. SEALING IS ONLY ACHIEVED WHEN USING GROMMETS ABB-*-**-**-GAC-***, SUPPLIED BY AB CONNECTORS DRAWN K.WINCZURA DATE CHECKED 05/05/2015 APPROVED K.SHEPPARD 23/06/2015 APPROVED H.SMITH 3RD ANGLE PROJECTION NOT TO SCALE 05/05/2015 21/10/2015 REVISIONS LTR DESCRIPTION D REVISED PER ECO-15-013162 E REVISED PER ECO-15-015098 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 14/09/2015 21/10/2015 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED H.SMITH H.SMITH TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: BS9522 F0032 (PATT121B) CONNECTORS TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR78 E 1 IF MAX ENTRY IS EXCEEDED BACKSHELL WILL BE SUPPLIED AS TYPE 2 30,50 MAX SILICONE O-RING XXXX A THREAD ØK ØY ØS ØZ XXXX ØB L A THREAD ØB 26,50 SILICONE O-RING PART MARK HERE 5 PART MARK HERE STRAIGHT BACKSHELL - TYPE 1 STRAIGHT BACKSHELL - TYPE 2 C 30,50 MAX F D G 45° BACKSHELL - TYPE 2 45° BACKSHELL - TYPE 1 H 30,50 MAX W M J E T 90° BACKSHELL - TYPE 1 90° BACKSHELL - TYPE 2 H W 30,50 MAX M J E T 90° BACKSHELL - TYPE 1 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE DRAWN K.WINCZURA DATE CHECKED 05/05/2015 APPROVED K.SHEPPARD 23/06/2015 APPROVED H.SMITH 3RD ANGLE PROJECTION NOT TO SCALE 05/05/2015 21/10/2015 REVISIONS DESCRIPTION LTR D REVISED PER ECO-15-013162 E REVISED PER ECO-15-015098 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 14/09/2015 21/10/2015 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED H.SMITH H.SMITH 90° BACKSHELL - TYPE 2 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: BS9522 F0032 (PATT121B) CONNECTORS TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR78 E 2 TABLE 1 ORDER SHELL NUMBER SIZE 12 10SL & 12S 14 14S 16 16/16S 18 18 20 20 22 22 24 24 28 28 32 32 36 36 TABLE 2 ENTRY SIZE 04 05 06 07 08 10 12 14 16 18 20 22 24 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE A THREAD 5/8-24UNEF 3/4-20UNEF 7/8-20UNEF 1-20UNEF 1 1/8-18UNEF 1 1/4-18UNEF 1 3/8-18UNEF 1 5/8-18UNEF 1 7/8-16UN 2 1/16-16UNS ØZ MIN 6,35 7,92 9,53 11,10 12,70 15,88 19,05 22,23 25,40 28,58 31,75 34,93 38,10 ØS 9,49 +/-0,04 11,06 +/-0,04 12,66 +/-0,04 14,21 +/-0,07 15,81 +/-0,07 18,96 +/-0,08 22,14 +/-0,08 25,30 +/-0,08 28,48 +/-0,08 31,65 +/-0,08 34,83 +/-0,08 37,98 +/-0,08 41,15 +/-0,08 DATE 05/05/2015 APPROVED K.SHEPPARD 23/06/2015 21/10/2015 REVISIONS DESCRIPTION LTR D REVISED PER ECO-15-013162 E REVISED PER ECO-15-015098 ØY ± 0,3 14,00 15,50 17,10 18,70 20,30 23,50 26,70 29,80 33,00 36,20 39,40 42,50 45,70 C ±0,5 15,2 16,2 23,9 24,6 25,1 25,9 27,1 28,8 29,7 31,2 ØK MAX NA NA 21,0 21,0 24,5 29,0 32,5 35,5 37,0 40,0 43,5 48,5 52,1 3RD ANGLE PROJECTION NOT TO SCALE 05/05/2015 CHECKED H.SMITH MAX ENTRY 05 07 08 10 12 14 16 18 22 24 D ±0,5 27,5 28,0 29,0 29,7 30,5 30,9 31,1 32,1 29,3 30,7 W ±0,5 25,0 29,0 36,0 39,0 42,0 45,0 48,0 55,1 59,0 64,0 T ±0,5 17,3 20,0 25,5 27,0 28,0 29,5 31,0 35,5 36,2 39,0 E ±0,5 27,4 28,0 29,5 31,0 32,7 34,3 35,8 38,9 42,4 45,2 T ±0,5 17,3 20,1 25,5 27,0 28,0 29,5 31,0 35,5 36,2 39,0 W MAX 25,5 29,5 36,5 39,5 42,5 45,5 48,5 55,6 59,5 64,5 E ±0,5 27,4 28,0 29,5 31,0 32,7 34,3 35,8 38,9 42,4 45,2 L MAX 32,00 32,00 36,83 36,83 38,87 38,87 41,15 41,15 44,71 44,71 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE DRAWN K.WINCZURA APPROVED ØB MAX 20,3 23,7 26,7 30,3 35,3 38,3 41,3 47,8 54,2 62,2 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 14/09/2015 21/10/2015 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED H.SMITH H.SMITH F ±0,5 NA NA 12,5 12,5 13,1 13,5 14,5 15,5 16,1 16,5 17,0 18,5 21,9 G ±0,5 NA NA 27,5 27,5 28,0 29,0 29,7 30,5 30,9 31,1 32,1 35,3 38,1 H ±0,5 NA NA 24,0 24,0 27,0 31,0 34,0 35,0 38,0 42,0 45,0 54,5 58,0 M ±0,5 NA NA 15,5 15,5 17,0 19,5 21,0 20,0 21,5 24,0 25,5 31,0 33,0 J ±0,5 NA NA 28,0 28,0 29,5 31,0 32,7 34,3 35,8 37,4 38,9 42,0 46,0 H ±0,5 NA NA 24,3 24,3 28,3 31,1 34,2 38,5 40,7 43,7 46,4 50,0 53,5 M ±0,5 NA NA 17,2 17,2 19,4 21,0 22,8 25,3 26,1 27,6 29,1 31,0 33,0 J ±0,5 NA NA 28,2 28,2 29,7 31,2 32,9 34,5 36,1 37,6 39,1 42,0 46,0 TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: BS9522 F0032 (PATT121B) CONNECTORS TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR78 E 3