TXR32AG90-2016AI2J

ANTI-ROTATIONAL SCREW 7 TINEL LOCK RING 3 CODE 32 - TINEL-LOCK BACKSHELL TXR32AB00-1608AISERIES TXR: RING INCLUDED (SEE RING OPTION) TX: RING NOT INCLUDED CONNECTOR INTERFACE MATERIAL REFER TO CH00-0250-008 FINISH REFER TO CH00-0250-008 ANGLE SHELL SIZE (TABLE 1) ENTRY SIZE (TABLE 2) RING OPTION AI - TO SUIT SINGLE BRAID BI - TO SUIT DOUBLE BRAID FOR TX, LEAVE BLANK MODIFICATION CODE REFER TO CH00-0250-008 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD AND A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-008. 3. SEE DRAWING TR FOR DETAIL ON TINEL-LOCK RING, RINGS ARE DESIGNED TO BE HEATED ELECTRICALLY, ALL RINGS ARE MARKED WITH THERMOCHROMIC PAINT WHICH CHANGES COLOUR WHEN INSTALLATION TEMPERATURE IS REACHED. 4. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER LESS RING DESIGNATOR. (e.g. 06090-TXR32AB00-1406). RING SHALL BEAR NO MARKING. 5. FOR LARGER ENTRY SIZES, A 2 PIECE BACKSHELL ASSEMBLY (TYPE 2) IS SUPPLIED. 6. BACKSHELL MATES TO MIL-DTL-22992, CLASS C & R, MS17343, 44, 45 & 47 CONNECTORS. 7. ANTI-ROTATIONAL SET SCREW, 3 THREADED HOLES 120° ± 5° APART, SINGLE MATING SET SCREW SUPPLIED. DRAWN K.WINCZURA DATE CHECKED 15/12/2014 APPROVED K.SHEPPARD 01/09/2015 APPROVED H.SMITH 3RD ANGLE PROJECTION NOT TO SCALE 15/12/2014 06/10/2015 REVISIONS LTR DESCRIPTION E REVISED PER ECO-14-008400 F REVISED PER ECO-15-014373 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 06.04.14 01.09.15 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED I.M H . S MI T H TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: MIL-DTL-22992 TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR32 F 1 IF MAX ENTRY IS EXCEEDED BACKSHELL WILL BE SUPPLIED AS TYPE 2 34,50 30,50 XXXX A THREAD ØB ØK ØY ØZ XXXX ØS 7 A THREAD ØB SILICONE O-RING PART MARK HERE PART MARK HERE NO PART MARK STRAIGHT BACKSHELL - TYPE 2 STRAIGHT BACKSHELL - TYPE 1 C 30,50 F G 45° BACKSHELL - TYPE 2 45° BACKSHELL - TYPE 1 W H T 30,50 J E M 90° BACKSHELL - TYPE 1 W 90° BACKSHELL - TYPE 2 H 30,50 M E J T 90° BACKSHELL - TYPE 1 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE DRAWN K.WINCZURA DATE CHECKED 15/12/2014 APPROVED K.SHEPPARD 01/09/2015 APPROVED H.SMITH 3RD ANGLE PROJECTION NOT TO SCALE 15/12/2014 06/10/2015 REVISIONS LTR DESCRIPTION E REVISED PER ECO-14-008400 F REVISED PER ECO-15-014373 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 06.04.14 01.09.15 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED I.M H . S MI T H 90° BACKSHELL - TYPE 2 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: MIL-DTL-22992 TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR32 F 2 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE SHELL SIZE 12 14 16 18 20 22 24 28 32 36 40 44 A LH THREAD 3/4-20UNEF 7/8-20UNEF 1-20UNEF 1 1/8-18UNEF 1 1/4-18UNEF 1 3/8-18UNEF 1 5/8-18UNEF 1 7/8-16UN 2 1/16-16UNS 2 5/16-16UNS 2 5/8-18UN 2 7/8-16UNS ØB MAX 27,2 30,2 33,5 36,6 39,9 42,9 52,6 58,9 65,3 71,6 78,0 83,0 MAX ENTRY 08 10 12 14 16 18 22 24 24 24 24 28 W ±0,5 41,0 44,0 45,8 51,5 54,7 56,9 67,0 71,3 81,5 84,8 90,0 93,0 D MAX 28,5 29,5 30,2 31,0 31,4 31,6 32,6 33,0 32,5 33,8 35,3 37,0 C MAX 29,0 29,7 30,0 30,7 31,2 32,0 33,5 34,8 36,3 37,6 38,9 40,5 T ±0,5 30,0 31,5 32,3 36,0 37,2 38,5 43,9 46,3 52,0 52,8 55,6 57,0 E ±0,5 29,5 31,0 32,7 34,3 35,8 37,4 41,9 45,3 48,4 51,4 54,6 57,7 T ±0,5 30,0 31,5 32,3 36,0 37,2 38,5 42,8 46,0 52,0 52,8 55,6 57,0 W MAX 41,0 44,0 45,8 51,5 54,7 56,9 64,2 70,8 81,5 84,0 90,0 93,0 E ±0,5 29,7 31,2 32,9 34,5 36,1 37,6 41,9 45,3 48,4 51,4 54,6 57,7 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE ENTRY SIZE 04 05 06 07 08 10 12 14 16 18 20 22 24 28 ØZ MIN 6,35 7,92 9,53 11,10 12,70 15,88 19,05 22,23 25,40 28,58 31,75 34,93 38,10 44,45 DRAWN K.WINCZURA ØS 9,49 +/-0,04 11,06 +/-0,04 12,66 +/-0,04 14,21 +/-0,07 15,81 +/-0,07 18,96 +/-0,08 22,14 +/-0,08 25,30 +/-0,08 28,48 +/-0,08 31,65 +/-0,08 34,83 +/-0,08 37,98 +/-0,08 41,15 +/-0,08 47,50 +/-0,08 DATE 15/12/2014 APPROVED K.SHEPPARD 01/09/2015 APPROVED H.SMITH 3RD ANGLE PROJECTION NOT TO SCALE 15/12/2014 CHECKED 06/10/2015 REVISIONS LTR DESCRIPTION E REVISED PER ECO-14-008400 F REVISED PER ECO-15-014373 ØY ± 0,3 14,0 15,5 17,1 18,7 20,3 23,5 26,7 29,8 33,0 36,2 39,4 42,5 45,7 52,0 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 06.04.14 01.09.15 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED I.M H . S MI T H ØK MAX NA NA NA NA NA 29,0 32,5 35,5 37,0 40,0 43,5 48,5 52,1 58,5 F ±0,5 NA NA NA NA NA 13,5 14,5 15,5 16,1 16,5 17,0 18,5 21,9 26,9 G ±0,5 NA NA NA NA NA 29,0 29,7 30,5 30,9 31,1 32,1 35,3 38,1 44,4 H ±0,5 NA NA NA NA NA 31,0 34,0 35,0 38,0 42,0 45,0 54,5 58,0 65,5 M ±0,5 NA NA NA NA NA 19,5 21,0 20,0 21,5 24,0 25,5 31,0 33,0 36,5 J ±0,5 NA NA NA NA NA 31,0 32,7 34,3 35,8 37,4 38,9 42,0 46,0 51,1 H ±0,5 NA NA NA NA NA 31,1 34,2 38,5 40,7 43,7 46,4 50,0 53,5 60,3 M ±0,5 NA NA NA NA NA 21,0 22,8 25,3 26,1 27,6 29,1 31,0 33,0 36,5 J ±0,5 NA NA NA NA NA 31,2 32,9 34,5 36,1 37,6 39,1 42,0 46,0 51,1 TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: MIL-DTL-22992 TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR32 F 3