TXR54AC00-1608AIF

TINEL LOCK RING 3 CODE 54 - TINEL-LOCK BACKSHELL TXR54AB00-1608AI-S SERIES TXR: RING INCLUDED (SEE RING OPTION) TX: RING NOT INCLUDED CONNECTOR INTERFACE MATERIAL REFER TO CH00-0250-008 FINISH REFER TO CH00-0250-008 ANGLE DASH NUMBER (TABLE 1) ENTRY SIZE (TABLE 2) RING OPTION AI - TO SUIT SINGLE BRAID BI - TO SUIT DOUBLE BRAID FOR TX, LEAVE BLANK MODIFICATION CODE REFER TO CH00-0250-008 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD AND A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-008. 3. SEE DRAWING TR FOR DETAIL ON TINEL-LOCK RING, RINGS ARE DESIGNED TO BE HEATED ELECTRICALLY, ALL RINGS ARE MARKED WITH THERMOCHROMIC PAINT WHICH CHANGES COLOUR WHEN INSTALLATION TEMPERATURE IS REACHED. 4. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER LESS RING DESIGNATOR. (e.g. 06090-TXR54AB00-1206). RING SHALL BEAR NO MARKING. 5. FOR LARGER ENTRY SIZES, A 2 PIECE BACKSHELL ASSEMBLY (TYPE 2) IS SUPPLIED. 6. BACKSHELL MATES TO MIL-C-81703, SERIES III, MS3424, MS3446, MS3464, MS3467, MS3468 7. BACKSHELL MATES TO MIL-C-5015G, MS3400 SERIES, CLASS D, E, K, L, U & W, MS3400, MS3401, MS3404, MS3406 MS3424, MS3446, MS3464, MS3467, MS3468, MS3450, MS3451, MS3454, MS3456, MS3470, MS3471, MS3472, MS3474, MS3475, MS3476. MIL-C-83723, SERIES II, CLASS A & L. MIL-C-83723, SERIES I & II, CLASS A, G, K, R & S: M83723/1, /2, /3, /4, /5, /6, /7, /8, /13, /14, /36, /37, /38, /39, /40, /41, /42, /43, /48, /49, /65, /66, /67, /68, /69, /70, /71, /72, /73, /74, /75, /76, /77, /78, /82, /83, /84, /85, /86, /87, /91, /92, /95, /97, /98, (MS3155 CONTROLLED INTERFACE). 8. THESE DIMENSIONS APPLY IF A SELF-LOCKING COUPLING NUT IS USED. DRAWN K.WINCZURA DATE 3RD ANGLE PROJECTION NOT TO SCALE 01/12/2014 CHECKED 01/12/2014 APPROVED K.SHEPPARD 04/12/2014 APPROVED REVISIONS LTR DESCRIPTION K REVISED PER ECO-15-002312 L REVISED PER ECO-17-009011 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 13.02.15 21.06.17 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED H.SMITH D.JONES TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: MIL-DTL-26482 SERIES II / MIL-DTL-83723 SERIES I & III TE CONNECTIVITY - POLAMCO LTD RESERV ES TH E RIGH T TO AMEND TH IS DRAW ING AND THE INFORMATIO N SET FORTH HEREON AT ANY T IME. USERS SH OULD IND EPENDENTLY EVALUATE TH E SUITABILITY OF THE PRODUCT FOR TH EIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR54 L 1 ALTERNATIVE PROFILE IF MAX ENTRY IS EXCEEDED BACKSHELL WILL BE SUPPLIED AS TYPE 2 ALTERNATIVE PROFILE 16,80 `0,50 26,50 A THREAD XXXX ØB ØK ØY ØS XXXX ØZ A THREAD STAINLESS STEEL TEETH VIEW ØB 25,50 PART MARK HERE PART MARK HERE STRAIGHT BACKSHELL - TYPE 1 5 STRAIGHT BACKSHELL - TYPE 2 C 16,80 `0,50 F D G 45° BACKSHELL - TYPE 2 45° BACKSHELL - TYPE 1 H W 16,80 `0,50 M J E T 90° BACKSHELL - TYPE 1 H W 16,80 `0,50 M J E T 90° BACKSHELL - TYPE 1 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE DRAWN K.WINCZURA DATE 3RD ANGLE PROJECTION NOT TO SCALE 01/12/2014 CHECKED 01/12/2014 APPROVED K.SHEPPARD 04/12/2014 APPROVED REVISIONS LTR DESCRIPTION K REVISED PER ECO-15-002312 L REVISED PER ECO-17-009011 90° BACKSHELL - TYPE 2 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 13.02.15 21.06.17 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED H.SMITH D.JONES 90° BACKSHELL - TYPE 2 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: MIL-DTL-26482 SERIES II / MIL-DTL-83723 SERIES I & III TE CONNECTIVITY - POLAMCO LTD RESERV ES TH E RIGH T TO AMEND TH IS DRAW ING AND THE INFORMATIO N SET FORTH HEREON AT ANY T IME. USERS SH OULD IND EPENDENTLY EVALUATE TH E SUITABILITY OF THE PRODUCT FOR TH EIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR54 L 2 MODIFICATION S (SELF-LOCKING COUPLING NUT) 21,60 `0,50 SELF-LOCKING MECHANISM ØB 8 SELF-LOCKING MECHANISM A THREAD ØK 8 ØB 8 A THREAD SELF-LOCKING MECHANISM BACKSHELL - TYPE 1 BACKSHELL - TYPE 2 TABLE 1 ORDER NO. 03 08 10 12 14 16 18 20 22 24 28 32 36 40 44 48 61 TABLE 2 ENTRY SIZE 04 05 06 07 08 10 12 14 16 18 20 22 24 28 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE SHELL SIZE 6 7 3 8 & 8S A THREAD 9/16-24 UNEF 1/2-20 UNF 10, 10S, 10SL 5/8-24 UNEF 7 12 & 12S 3/4-20 UNEF 12 14 & 14S 7/8-20 UNEF 19 16 & 16S 1-20 UNEF 18 1 1/16-18 UNEF 27 1 3/16-18 UNEF 20 37 1 5/16-18 UNEF 22 24 1 7/16-18 UNEF 28 1 3/4-18UNS 32 2-18 UNS 36 2 1/4-16 UN 40 2 1/2-16 UN 2 3/4-16 UN 44 48 3-16UN 1 1/2-18 UNEF 61 ØB MAX 17,0 15,6 18,6 21,7 24,9 28,2 30,9 34,1 37,3 40,4 50,0 56,3 62,7 69,0 75,4 81,7 42,0 ØB MAX 8 19,4 18,0 21,0 25,0 28,0 31,0 34,0 36,5 39,8 42,0 49,8 57,2 63,6 70,0 75,4 81,7 43,6 MAX ENTRY 04 04 06 08 08 10 12 14 16 18 22 24 28 28 28 28 18 C ±0,5 16,8 16,6 16,8 17,3 18,1 19,0 19,2 20,1 20,3 21,8 23,3 25,0 26,2 28,6 30,1 31,3 22,1 D ±0,5 27,0 26,8 27,5 28,0 29,0 29,7 30,5 30,9 31,1 32,1 32,5 29,3 30,7 32,0 33,7 34,9 26,6 W ±0,5 26,4 24,5 26,5 29,0 30,5 34,0 37,0 42,0 44,0 45,0 54,2 60,9 67,2 73,2 79,5 85,8 47,8 T ±0,5 17,8 17,5 17,8 18,7 19,0 21,0 23,5 27,0 27,0 27,0 31,4 36,4 38,0 41,0 44,1 47,2 28,0 E ±0,5 25,9 26,2 28,0 29,5 30,3 32,7 32,7 34,3 35,8 37,4 41,9 45,3 48,4 51,4 54,6 57,7 38,7 W ±0,5 26,3 22,4 25,0 28,3 30,4 33,5 35,5 38,8 41,9 44,8 50,7 60,0 65,5 72,0 75,5 75,5 48,3 T ±0,5 16,0 17,5 18,8 20,4 21,5 23,0 24,0 25,7 27,2 28,7 31,6 33,5 36,0 39,3 40,8 40,8 27,0 E ±0,5 25,9 26,2 28,0 29,5 31,0 32,7 32,7 34,3 35,8 37,4 41,9 45,3 48,4 51,4 54,6 57,7 38,7 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE ØZ MIN 6,35 7,92 9,53 11,10 12,70 15,88 19,05 22,23 25,40 28,58 31,75 34,93 38,10 44,45 DRAWN K.WINCZURA ØS 9,49 +/-0,04 11,06 +/-0,04 12,66 +/-0,04 14,21 +/-0,07 15,81 +/-0,07 18,96 +/-0,08 22,14 +/-0,08 25,30 +/-0,08 28,48 +/-0,08 31,65 +/-0,08 34,83 +/-0,08 37,98 +/-0,08 41,15 +/-0,08 47,50 +/-0,08 ØY ± 0,3 14,00 15,50 17,10 18,70 20,30 23,50 26,70 29,80 33,00 36,20 39,40 42,50 45,70 52,00 DATE 3RD ANGLE PROJECTION NOT TO SCALE 01/12/2014 CHECKED 01/12/2014 APPROVED K.SHEPPARD 04/12/2014 APPROVED REVISIONS LTR DESCRIPTION K REVISED PER ECO-15-002312 L REVISED PER ECO-17-009011 ØK MAX NA 21,0 21,0 21,0 24,5 29,0 32,5 35,5 37,0 40,0 43,5 48,5 52,1 58,5 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 13.02.15 21.06.17 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED H.SMITH D.JONES ØK MAX 8 NA 24,6 24,6 24,6 28,3 32,4 35,6 38,5 41,7 43,9 47,0 50,0 56,0 61,0 F ±0,5 NA 12,5 12,5 12,5 13,1 13,5 14,5 15,5 16,1 16,5 17,0 18,5 21,9 26,9 G ±0,5 NA 27,5 27,5 27,5 28,0 29,0 29,7 30,5 30,9 31,1 32,1 35,3 38,1 44,4 H ±0,5 NA 24,0 24,0 24,0 27,0 31,0 34,0 35,0 38,0 42,0 45,0 54,5 58,0 65,5 M ±0,5 NA 15,5 15,5 15,5 17,0 19,5 21,0 20,0 21,5 24,0 25,5 31,0 33,0 36,5 J ±0,5 NA 27,95 27,95 27,95 29,45 31,00 32,70 34,25 35,80 37,40 38,90 42,00 46,00 51,1 H ±0,5 NA 24,3 24,3 24,3 28,3 31,1 34,2 38,5 40,7 43,7 46,4 50,0 53,5 60,3 M ±0,5 NA 17,2 17,2 17,2 19,4 21,0 22,8 25,3 26,1 27,6 29,1 31,0 33,0 36,5 J ±0,5 NA 28,2 28,2 28,2 29,7 31,2 32,9 34,5 36,1 37,6 39,1 42,0 46,0 51,1 TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: MIL-DTL-26482 SERIES II / MIL-DTL-83723 SERIES I & III TE CONNECTIVITY - POLAMCO LTD RESERV ES TH E RIGH T TO AMEND TH IS DRAW ING AND THE INFORMATIO N SET FORTH HEREON AT ANY T IME. USERS SH OULD IND EPENDENTLY EVALUATE TH E SUITABILITY OF THE PRODUCT FOR TH EIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR54 L 3