TXR61AB90-1008AI2-CS2477

TINEL LOCK RING 3 CODE 61 - TINEL-LOCK BACKSHELL TXR61AB00-1608AI-S SERIES TXR: RING INCLUDED (SEE RING OPTION) TX: RING NOT INCLUDED CONNECTOR INTERFACE MATERIAL REFER TO CH00-0250-008 FINISH REFER TO CH00-0250-008 ANGLE ORDER NUMBER (TABLE 1) ENTRY SIZE (TABLE 2) RING OPTION AI - TO SUIT SINGLE BRAID BI - TO SUIT DOUBLE BRAID FOR TX, LEAVE BLANK MODIFICATION CODE REFER TO CH00-0250-008 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD AND A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-008. 3. SEE DRAWING TR FOR DETAIL ON TINEL-LOCK RING, RINGS ARE DESIGNED TO BE HEATED ELECTRICALLY, ALL RINGS ARE MARKED WITH THERMOCHROMIC PAINT WHICH CHANGES COLOUR WHEN INSTALLATION TEMPERATURE IS REACHED. 4. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER LESS RING DESIGNATOR. (e.g. 06090-TXR61AB00-1206). RING SHALL BEAR NO MARKING. 5. FOR LARGER ENTRY SIZES, A 2 PIECE BACKSHELL ASSEMBLY (TYPE 2) IS SUPPLIED. 6. BACKSHELL MATES TO MIL-C-81511, SERIES 1, 2, 3 AND 4, CLASS A, C, E, F, P AND T, M81511/1, /5, /6, /21, /23, /25, /26, /31, /32, /33, /34, /35, /36, /37, /38 /45, /46, /49, /51, /53, /55 AND /56 CONNECTORS. 7. THESE DIMENSIONS APPLY IF A SELF-LOCKING COUPLING NUT IS USED. If this document is printed it becomes uncontrolled. Check for the latest revision DATE DRAWN K.WINCZURA 24/02/2015 CHECKED 24/02/2015 APPROVED K.SHEPPARD 20/03/2015 APPROVED H.SMITH 20/08/2015 REVISIONS LTR DESCRIPTION D REVISED PER ECN AD93073 E REVISED PER ECO-15-011999 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 20/08/2015 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED H.SMITH TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: MIL-DTL-81511 TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR61 E 1 If this document is printed it becomes uncontrolled. Check for the latest revision 23,80 ` 0,50 XXXX ØY ØS ØB 26,50 XXXX ØZ ØK A THREAD A THREAD 40,00 SILICONE O-RING ØB IF MAX ENTRY IS EXCEEDED BACKSHELL WILL BE SUPPLIED AS TYPE 2 PART MARK HERE PART MARK HERE STRAIGHT BACKSHELL - TYPE 1 5 STRAIGHT BACKSHELL - TYPE 2 C 23,80 `0,50 F G D 45° BACKSHELL - TYPE 2 45° BACKSHELL - TYPE 1 W H 23,80 `0,50 T E J M 90° BACKSHELL - TYPE 2 90° BACKSHELL - TYPE 1 H W E T 24/02/2015 CHECKED 24/02/2015 APPROVED K.SHEPPARD 20/03/2015 APPROVED H.SMITH 90° BACKSHELL - TYPE 1 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE DATE DRAWN K.WINCZURA 20/08/2015 REVISIONS LTR DESCRIPTION D REVISED PER ECN AD93073 E REVISED PER ECO-15-011999 M J 23,80 ` 0,50 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 20/08/2015 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED H.SMITH 90° BACKSHELL - TYPE 2 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: MIL-DTL-81511 TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR61 E 2 MODIFICATION S 24,30 ` 0,50 SELF-LOCKING MECHANISM ØB 7 A THREAD ØK 7 ØB 7 A THREAD SELF-LOCKING MECHANISM BACKSHELL - TYPE 2 BACKSHELL - TYPE 1 TABLE 1 ORDER NO. 08 10 14 16 18 20 22 24 TABLE 2 ENTRY SIZE 04 05 06 07 08 10 12 14 16 18 20 22 24 SELF-LOCKING MECHANISM THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE SHELL SIZE COM'L / MIL 8/A 10 / B 14 / D 16 / E 18 / F 20 / G 22 / H 24 / J ØB MAX 21,6 24,8 31,1 34,3 37,5 40,6 43,8 47,0 A THREAD 1/2-28UNEF 5/8-28UNEF 7/8-28UNEF 1-28UNEF 1 1/8-28UNEF 1 1/4-28UNEF 1 3/8-28UNEF 1 1/2-28UNEF ØB MAX 7 23,6 26,4 32,9 36,6 38,9 41,9 44,9 48,1 MAX ENTRY 06 08 12 14 16 18 20 22 C ±0,5 18,7 19,0 20,5 21,2 21,9 22,5 22,8 23,7 D ±0,5 26,8 27,5 29,0 29,7 30,5 30,9 31,1 32,1 W ±0,5 31,7 34,0 40,4 44,0 46,7 49,7 51,2 54,7 T ±0,5 24,5 25,3 28,2 31,0 32,0 33,0 33,7 35,5 E ±0,5 27,05 27,95 31,50 32,70 34,25 35,80 37,40 38,90 W ±0,5 29,4 32,4 39,3 42,4 45,2 47,6 49,8 52,8 T ±0,5 24,5 25,3 28,2 31,0 32,0 33,0 33,7 35,5 E ±0,5 26,4 28,2 31,2 32,9 34,5 36,1 37,6 39,1 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE ØZ MIN 6,35 7,92 9,53 11,10 12,70 15,88 19,05 22,23 25,40 28,58 31,75 34,93 38,10 ØY ± 0,3 14,00 15,50 17,10 18,70 20,30 23,50 26,70 29,80 33,00 36,20 39,40 42,50 45,70 ØS 9,49 +/-0,04 11,06 +/-0,04 12,66 +/-0,04 14,21 +/-0,07 15,81 +/-0,07 18,96 +/-0,08 22,14 +/-0,08 25,30 +/-0,08 28,48 +/-0,08 31,65 +/-0,08 34,83 +/-0,08 37,98 +/-0,08 41,15 +/-0,08 ØK MAX NA NA NA 21,0 24,5 29,0 32,5 35,5 37,0 40,0 43,5 48,5 52,1 ØK MAX 7 NA NA NA 24,6 28,3 32,4 35,6 38,5 41,7 43,9 47,0 50,0 56,0 F ±0,5 NA NA NA 12,5 13,1 13,5 14,5 15,5 16,1 16,5 17,0 18,5 21,9 G ±0,5 NA NA NA 27,5 28,0 29,0 29,7 30,5 30,9 31,1 32,1 35,3 38,1 H ±0,5 NA NA NA 24,0 27,0 31,0 34,0 35,0 38,0 42,0 45,0 54,5 58,0 M ±0,5 NA NA NA 15,5 17,0 19,5 21,0 20,0 21,5 24,0 25,5 31,0 33,0 J ±0,5 NA NA NA 27,95 29,45 31,00 32,70 34,25 35,80 37,40 38,90 42,00 46,00 H ±0,5 NA NA NA 24,3 28,3 31,1 34,2 38,5 40,7 43,7 46,4 50,0 53,5 M ±0,5 NA NA NA 17,2 19,4 21,0 22,8 25,3 26,1 27,6 29,1 31,0 33,0 J ±0,5 NA NA NA 28,2 29,7 31,2 32,9 34,5 36,1 37,6 39,1 42,0 46,0 If this document is printed it becomes uncontrolled. Check for the latest revision DATE DRAWN K.WINCZURA 24/02/2015 CHECKED 24/02/2015 APPROVED K.SHEPPARD 20/03/2015 APPROVED H.SMITH 20/08/2015 REVISIONS LTR DESCRIPTION D REVISED PER ECN AD93073 E REVISED PER ECO-15-011999 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 20/08/2015 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED H.SMITH TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: MIL-DTL-81511 TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR61 E 3