TXR64AB90-3616AI

TINEL LOCK RING 3 CODE 64 - TINEL-LOCK BACKSHELL TXR64AB00-1608AISERIES TXR: RING INCLUDED (SEE RING OPTION) TX: RING NOT INCLUDED CONNECTOR INTERFACE MATERIAL REFER TO CH00-0250-008 FINISH REFER TO CH00-0250-008 ANGLE DASH NUMBER (TABLE 1) ENTRY SIZE (TABLE 2) RING OPTION AI - TO SUIT SINGLE BRAID BI - TO SUIT DOUBLE BRAID FOR TX, LEAVE BLANK MODIFICATION CODE REFER TO CH00-0250-008 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD AND A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-008. 3. SEE DRAWING TR FOR DETAIL ON TINEL-LOCK RING, RINGS ARE DESIGNED TO BE HEATED ELECTRICALLY, ALL RINGS ARE MARKED WITH THERMOCHROMIC PAINT WHICH CHANGES COLOUR WHEN INSTALLATION TEMPERATURE IS REACHED. 4. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER LESS RING DESIGNATOR. (e.g. 06090-TXR64AB00-1406). RING SHALL BEAR NO MARKING. 5. IF MAX ENTRY IS EXCEEDED, A 2 PIECE BACKSHELL ASSEMBLY (TYPE 2) IS SUPPLIED. 6. BACKSHELL MATES TO VEAM "CIR" SERIES CONNECTORS, LESS ENDBELL. If this document is printed it becomes uncontrolled. Check for the latest revision DATE DRAWN K.WINCZURA 16/12/2014 CHECKED 16/12/2014 APPROVED K.SHEPPARD 19/12/2014 APPROVED H.SMITH 17/07/2015 REVISIONS LTR DESCRIPTION F REVISED PER ECO-15-002352 G REVISED PER ECO-15-010492 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 18/02/2015 17/07/2015 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED H.SMITH H.SMITH TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: VEAM "CIR" SERIES, LESS ENDBELL TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR64 G 1 IF MAX ENTRY IS EXCEEDED BACKSHELL WILL BE SUPPLIED AS TYPE 2 24,80 ` 0,50 XXXX A THREAD ØK ØY ØS XXXX ØZ A THREAD ØB 35,00 SILICONE O-RING ØB 26,50 PART MARK HERE PART MARK HERE STRAIGHT BACKSHELL - TYPE 1 5 STRAIGHT BACKSHELL - TYPE 2 24,80 ` 0,50 F C G D 45° BACKSHELL - TYPE 2 45° BACKSHELL - TYPE 1 H 24,80 ` 0,50 W M J E T If this document is printed it becomes uncontrolled. Check for the latest revision 90° BACKSHELL - TYPE 1 H 90° BACKSHELL - TYPE 2 W 24,80 `0,50 16/12/2014 CHECKED 16/12/2014 APPROVED K.SHEPPARD 19/12/2014 APPROVED H.SMITH 90° BACKSHELL - TYPE 1 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE DATE DRAWN K.WINCZURA 17/07/2015 REVISIONS LTR DESCRIPTION F REVISED PER ECO-15-002352 G REVISED PER ECO-15-010492 M J E T 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 18/02/2015 17/07/2015 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED H.SMITH H.SMITH 90° BACKSHELL - TYPE 2 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: VEAM "CIR" SERIES, LESS ENDBELL TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR64 G 2 TABLE 1 ORDER NO. 11 14 16 18 20 22 24 28 32 36 40 TABLE 2 ENTRY SIZE 04 05 06 07 08 10 12 14 16 18 20 22 24 28 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE SHELL SIZE 10SL 14S 16, 16S 18 20 22 24 28 32 36 40 A THREAD 5/8 - 24UNEF 3/4 - 20UNEF 7/8 - 20UNEF 1 - 20UNEF 1 1/8 - 18UNEF 1 1/4 - 18UNEF 1 3/8 - 18UNEF 1 5/8 - 18UNEF 1 7/8 - 16UN 2 1/16 -16UNS 2 5/16 -16UNS ØB MAX 23,1 26,4 31,0 34,3 37,4 40,6 43,7 50,0 56,4 62,7 69,1 MAX ENTRY 05 06 08 10 12 12 14 16 20 22 28 C ±0,5 20,3 21,3 23,1 24,6 25,9 26,4 27,2 27,7 29,2 30,5 32,0 D ±0,5 27,5 28,0 29,0 29,7 30,5 30,9 31,1 32,1 31,4 32,3 35,2 W ±0,5 29,7 32,8 34,8 39,1 41,4 45,0 48,3 52,3 58,4 64,5 73,2 T ±0,5 22,0 23,8 24,3 27,1 27,4 29,5 31,3 32,7 35,6 39,5 44,2 E ±0,5 26,50 27,95 29,45 31,00 32,70 34,25 35,80 38,90 42,00 44,70 49,10 W MAX 30,2 33,3 35,3 39,6 41,9 45,5 48,8 52,8 58,9 65,0 73,7 T ±0,5 22,0 23,8 24,3 27,1 27,4 29,5 31,3 32,7 35,6 39,5 44,2 E ±0,5 28,2 28,2 29,7 31,2 32,9 34,5 36,1 39,1 48,4 51,4 57,7 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE ØZ MIN 6,35 7,92 9,53 11,10 12,70 15,88 19,05 22,23 25,40 28,58 31,75 34,93 38,10 44,45 ØS 9,49 +/-0,04 11,06 +/-0,04 12,66 +/-0,04 14,21 +/-0,07 15,81 +/-0,07 18,96 +/-0,08 22,14 +/-0,08 25,30 +/-0,08 28,48 +/-0,08 31,65 +/-0,08 34,83 +/-0,08 37,98 +/-0,08 41,15 +/-0,08 47,50 +/-0,08 ØY ±0,3 14,00 15,50 17,10 18,70 20,30 23,50 26,70 29,80 33,00 36,20 39,40 42,50 45,70 52,00 ØK MAX NA NA 21,0 21,0 24,5 29,0 32,5 35,5 37,0 40,0 43,5 48,5 52,1 58,5 F ±0,5 NA NA 12,5 12,5 13,1 13,5 14,5 15,5 16,1 16,5 17,0 18,5 21,9 26,9 G ±0,5 NA NA 27,5 27,5 28,0 29,0 29,7 30,5 30,9 31,1 32,1 35,3 38,1 44,4 H ±0,5 NA NA 24,0 24,0 27,0 31,0 34,0 35,0 38,0 42,0 45,0 54,5 58,0 65,5 M ±0,5 NA NA 15,5 15,5 17,0 19,5 21,0 20,0 21,5 24,0 25,5 31,0 33,0 36,5 J ±0,5 NA NA 27,95 27,95 29,45 31,00 32,70 34,25 35,80 37,40 38,90 42,00 46,00 51,1 H ±0,5 NA NA 24,3 24,3 28,3 31,1 34,2 38,5 40,7 43,7 46,4 50,0 53,5 60,3 M ±0,5 NA NA 17,2 17,2 19,4 21,0 22,8 25,3 26,1 27,6 29,1 31,0 33,0 36,5 J ±0,5 NA NA 28,2 28,2 29,7 31,2 32,9 34,5 36,1 37,6 39,1 42,0 46,0 51,1 If this document is printed it becomes uncontrolled. Check for the latest revision DATE DRAWN K.WINCZURA 16/12/2014 CHECKED 16/12/2014 APPROVED K.SHEPPARD 19/12/2014 APPROVED H.SMITH 17/07/2015 REVISIONS LTR DESCRIPTION F REVISED PER ECO-15-002352 G REVISED PER ECO-15-010492 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 18/02/2015 17/07/2015 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED H.SMITH H.SMITH TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: VEAM "CIR" SERIES, LESS ENDBELL TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR64 G 3