TXR88AB00-0906AI

TINEL LOCK RING 3 CODE 88 - TINEL-LOCK BACKSHELL TXR88AB00-0905AISERIES TXR: RING INCLUDED (SEE RING OPTION) TX: RING NOT INCLUDED CONNECTOR INTERFACE MATERIAL REFER TO CH00-0250-008 FINISH REFER TO CH00-0250-008 ANGLE DASH NUMBER (TABLE 1) ENTRY SIZE (TABLE 2) RING OPTION AI - TO SUIT SINGLE BRAID BI - TO SUIT DOUBLE BRAID FOR TX, LEAVE BLANK MODIFICATION CODE REFER TO CH00-0250-008 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD AND A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-008. 3. SEE DRAWING TR FOR DETAIL ON TINEL-LOCK RING, RINGS ARE DESIGNED TO BE HEATED ELECTRICALLY, ALL RINGS ARE MARKED WITH THERMOCHROMIC PAINT WHICH CHANGES COLOUR WHEN INSTALLATION TEMPERATURE IS REACHED. 4. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER LESS RING DESIGNATOR. (e.g. 06090-TXR88AB00-0905). RING SHALL BEAR NO MARKING. 5. BACKSHELL MATES TO: GLENAIR SERIES 800, 801, 803, 804 & 805 CONNECTORS. If this document is printed it becomes uncontrolled. Check for the latest revision DATE DRAWN K.WINCZURA 25/02/2015 CHECKED 25/02/2015 APPROVED K.SHEPPARD 26/03/2015 APPROVED K.SMITH 20/08/2015 REVISIONS LTR DESCRIPTION D REVISED PER ECO-12-021276 E REVISED PER ECO-15-011999 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 05/12/2012 APPROVED SH 20/08/2015 K.SMITH TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: MIGHTY MOUSE 800-805 SERIES TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR88 E 1 ØZ XXXX ØB ØY 21,00 SILICONE O-RING ØS A-A A THREAD A PART MARK HERE A TABLE 1 ORDER NUMBER 05 06 07 08 09 10 11 12 13 14 15 SERIES 800 05 06 07 08 09 10 12 - SERIES 801 05 06 07 08 09 10 13 16-17 SERIES 802 05 06 07 08 09 10 12 14 15 TABLE 2 ENTRY SIZE 03 04 05 06 07 08 10 12 SERIES 803 & 804 05 06 07 08 09 10 12 14-15 ØZ +0,13/-0 4,75 6,35 7,92 9,53 11,10 12,70 15,88 19,05 SERIES 805 09 08 10 11 12 15 18-19 ØS 7,36 +/-0,03 9,49 +/-0,04 11,06 +/-0,04 12,66 +/-0,04 14,21 +/-0,07 15,81 +/-0,07 18,96 +/-0,08 22,14 +/-0,08 MAX ENTRY 03 04 04 04 06 06 08 08 08 10 12 A THREAD 1/4-32UNEF 5/16-32UNEF 7-16-28UNEF 3/8-32UNEF 1/2-28UNEF 9/16-24UNEF 5/8-24UNEF 11/16-24UNEF 3/4-20UNEF 7/8-20UNEF 15/16-20UNEF ØB MAX 13,0 14,7 18,0 15,7 19,0 21,2 22,0 25,5 25,5 28,0 34,3 ØY +/-0,3 10,60 14,00 15,50 17,10 18,70 20,30 23,50 26,70 If this document is printed it becomes uncontrolled. Check for the latest revision DATE DRAWN K.WINCZURA 25/02/2015 CHECKED 25/02/2015 APPROVED K.SHEPPARD 26/03/2015 APPROVED K.SMITH 20/08/2015 REVISIONS LTR DESCRIPTION D REVISED PER ECO-12-021276 E REVISED PER ECO-15-011999 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 05/12/2012 APPROVED SH 20/08/2015 K.SMITH TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: MIGHTY MOUSE 800-805 SERIES TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR88 E 2