UltraStable 600
High Stability Stainless
Steel Pressure Transducer
The UltraStable 600 from
Schaevitz Sensors, a division
of Measurement Specialties,
incorporates an ultra-rugged IP
67 rated housing. All wetted parts
are constructed of 316L stainless
steel, providing media isolation and
no internal “O” rings.
The UltraStable 600 also offers a wide
selection of standard pressure ranges
and electrical outputs. The unit's high
stability rating is provided by IC Sensors'
solid state UltraStable technology, which
provides stability over a wide
temperature range. The modular design
is adaptable to an infinite number of port
variations, and standard outputs include
.5V to 4.5V ratiometric, 0V to 5V, 1V to
5V, 0V to 10V, regulated and 4 to 20mA
current loop.
The UltraStable's small size vs. high
performance enables the miniaturization
of high accuracy pressure and vacuum
systems. The unit's new low-pressure
ranges add sensitivity that has
previously been unavailable in
transducers of this size. The competitive
price, coupled with its high accuracy,
may make the UltraStable 600 the best
choice for your application.
Field replacement can easily be
performed without sacrificing accuracy
due to the very small total error band of
.75% max.
0.75%
TEB
Features
✦ 0.75% TEB (Total Error Band) with .5% TEB
available as an option
✦ 0.1% Accuracy - typically
✦ -50 to 125º C Operating Temperature
✦ 100% stainless steel isolation. Small size
✦ Wide variety of pressure ranges and
electrical outputs
✦ Broad assortment of standard connectors
and ports
✦ UltraStable sensing technology
✦ CE versions available
✦ Custom verisons available
✦ Ranges starting from 15 psi FS
✦ High field Interchangeability
Applications
✦ Refrigeration and HVAC controls
✦ Process control
✦ Marine systems
✦ Tank level
A Division of
✦ Industrial machinery
✦ Calibration equipment
www.msiusa.com
04/02
UltraStable 600
Static Performance Specifications
Units
Supply voltage V
Supply Current mA
Min load impedance
Max load impedance
Amplified Ratiometric
0.5 - 4.5 V out
Amplified
0-5 V, 1-5 V, 0-10 V out
Min. Typ.
Max.
4.75
5
5.25
2.5
3
3.5
100 K ohm
Amplified
4 to 20 mA , two wire
Min. Typ.
Max.
8
30
2.5
3
3.5
100 K ohm
Min.
10
20
Typ.
Max.
30
Notes
1
RL=50* (Vsupply-10)
Accuracy %FS
Offset
%FS
Span
%FS
Long Term
stability %FS/year
-0.1
-0.5
-0.5
+0.1
+0.5
+0.5
-0.1
-0.5
-0.5
Response time ms
Isolation
Resistance M ohm
1.0
1.0
1.0
50
50
50
0.1
+0.1
+0.5
+0.5
-0.1
-0.5
-0.5
0.1
+0.1
+0.5
+0.5
3, 4
2
2
0.1
5
Notes:
1) Supply voltage must be 12 V for units with 10 V out.
4) Over temp range -20 to +85º C
5) @ 50 V DC
2) Room temperature calibration.
3) Combined BFSL, hysteresis and repeatability (Per ISA S37.2) .25% for 1Kpsi and above
Environmental Performance
Specification
Min.
Typ.
Max.
Notes
-0.75 %FS
0.50 %FS
+0.75 %FS
1, 3, 4
Total error band -20 to +85º C,
-7 to 185º F
Operating temperature range
Storage temperature range
Notes:
1) With reference to 25 º C, (77 º F)
2) Standard 105º C max. for cable version
-50ºC
125ºC
-58ºF
257º F
-50ºC
125ºC
-58ºF
257º F
2,3
2
3) Lower ranges available - consult factory
4) 0.5% max availability - consult factory
Schaevitz® Sensors
Division of Measurement Specialties
1000 Lucas Way
Hampton, VA 22666
1-800-745-8008
Phone: 757-766-1500
A Division of
www.msiusa.com
02/02
UltraStable 600
Mechanical Specifications
Specification
Value
Proof pressure
Burst pressure
Vibration
Shock
Pressure cycles
Media compatibility
Environmental protection
3x rated pressure
4x rated pressure or 20k psi
20 G’s rms @2kHz
100G 11ms
1 million cycles 0 to full scale
All materials compatible with 316 stainless steel
IP 67 (Cable version)
1)Other materials available - consult factory
Notes
2
1
2) Which ever is less, 10X burst available on
some pressure ranges (consult factory)
Ordering Information
US6
US6
Output
X
Output
Electrical
Connection
X
-
Connection
Specials
XXXXX
Port type
X
Specials
Port
3=.5 to 4.5V ratio (1)
1=Cable 2 feet
For Non-Standard
2= 1/4-19 BSP
4= 1 to 5V
4 = Integral Packard
the standard num-
4= 7/16-20 UNF
6= 0 to 5V
5 = PTIH-10-6P
ber of “00000”
5=1/4-18 NPT
-
Pressure range
XXXX
Pressure Range
PSI Ranges
Bar Ranges
(Bendix style)
changes to a higher 6= 1/8-27 NPT
8=4-20 mA
6 = GSSR 300 (9.4
value .i.e 1XXXX
030P = 0 to 30 psi
005B = 0 to 5 Bar
050P = 0 to 50psi
007B = 0 to 7 Bar
mm) (Square
Special numbers
8 = PTIH-08-4P
starting with a “C”
(Bendix Style)
are CE rated
X= special port
002B = 0 to 2 Bar
100P =0 to 100psi
010B = 0 to 10 Bar
300P = 0 to 300psi 020B = 0 to 20 Bar
500P - 0 to 500psi 035B = 0 to 35 Bar
x = Special
01KP = 0 to 1Kpsi
070B = 0 to 70 Bar
Connection
03KP = 0 to 3Kpsi
200B = 0 to 200 Bar
05KP = 0 to 5Kpsi
350B = 0 to 350 Bar
Example:
US664-000005-100PG is an UltraStable 600 with 0 to 5V out, Packard
Connector, nothing special, 1/4 NPT pressure port and 100 psi gage.
US681-C00002- 005PG is an UltraStable 600 with 4-20 mA, 2-wire, output,
2 feet of cable, CE certified, 1/4 BSP male pressure port and 5 psi gage.
A = absolute
001B = 0 to 1 Bar
7= 0 to 10V
Hirshman)
Pressure Units
G = gauge
015P = 0 to 15 psi
X=Special output
Pressure unit
X
1) For ratiometric output, span changes with input voltage
(see supply voltage specifications)
Schaevitz® Sensors
Division of Measurement Specialties
1000 Lucas Way
Hampton, VA 22666
1-800-745-8008
Phone: 757-766-1500
A Division of
www.msiusa.com
02/02
UltraStable 600
6-pin
4-pin
fl .875
fl .875
fl .875
www.powerandsignal.com
Note: Mating connector is available with 3 ft of cable PN (2001140).
Schaevitz® Sensors
Division of Measurement Specialties
1000 Lucas Way
Hampton, VA 22666
1-800-745-8008
Phone: 757-766-1500
A Division of
www.msiusa.com
02/02
很抱歉,暂时无法提供与“US631-C00005-015PA”相匹配的价格&库存,您可以联系我们找货
免费人工找货