US681-C00005-100PA

UltraStable 600 High Stability Stainless Steel Pressure Transducer The UltraStable 600 from Schaevitz Sensors, a division of Measurement Specialties, incorporates an ultra-rugged IP 67 rated housing. All wetted parts are constructed of 316L stainless steel, providing media isolation and no internal “O” rings. The UltraStable 600 also offers a wide selection of standard pressure ranges and electrical outputs. The unit's high stability rating is provided by IC Sensors' solid state UltraStable technology, which provides stability over a wide temperature range. The modular design is adaptable to an infinite number of port variations, and standard outputs include .5V to 4.5V ratiometric, 0V to 5V, 1V to 5V, 0V to 10V, regulated and 4 to 20mA current loop. The UltraStable's small size vs. high performance enables the miniaturization of high accuracy pressure and vacuum systems. The unit's new low-pressure ranges add sensitivity that has previously been unavailable in transducers of this size. The competitive price, coupled with its high accuracy, may make the UltraStable 600 the best choice for your application. Field replacement can easily be performed without sacrificing accuracy due to the very small total error band of .75% max. 0.75% TEB Features ✦ 0.75% TEB (Total Error Band) with .5% TEB available as an option ✦ 0.1% Accuracy - typically ✦ -50 to 125º C Operating Temperature ✦ 100% stainless steel isolation. Small size ✦ Wide variety of pressure ranges and electrical outputs ✦ Broad assortment of standard connectors and ports ✦ UltraStable sensing technology ✦ CE versions available ✦ Custom verisons available ✦ Ranges starting from 15 psi FS ✦ High field Interchangeability Applications ✦ Refrigeration and HVAC controls ✦ Process control ✦ Marine systems ✦ Tank level A Division of ✦ Industrial machinery ✦ Calibration equipment www.msiusa.com 04/02 UltraStable 600 Static Performance Specifications Units Supply voltage V Supply Current mA Min load impedance Max load impedance Amplified Ratiometric 0.5 - 4.5 V out Amplified 0-5 V, 1-5 V, 0-10 V out Min. Typ. Max. 4.75 5 5.25 2.5 3 3.5 100 K ohm Amplified 4 to 20 mA , two wire Min. Typ. Max. 8 30 2.5 3 3.5 100 K ohm Min. 10 20 Typ. Max. 30 Notes 1 RL=50* (Vsupply-10) Accuracy %FS Offset %FS Span %FS Long Term stability %FS/year -0.1 -0.5 -0.5 +0.1 +0.5 +0.5 -0.1 -0.5 -0.5 Response time ms Isolation Resistance M ohm 1.0 1.0 1.0 50 50 50 0.1 +0.1 +0.5 +0.5 -0.1 -0.5 -0.5 0.1 +0.1 +0.5 +0.5 3, 4 2 2 0.1 5 Notes: 1) Supply voltage must be 12 V for units with 10 V out. 4) Over temp range -20 to +85º C 5) @ 50 V DC 2) Room temperature calibration. 3) Combined BFSL, hysteresis and repeatability (Per ISA S37.2) .25% for 1Kpsi and above Environmental Performance Specification Min. Typ. Max. Notes -0.75 %FS 0.50 %FS +0.75 %FS 1, 3, 4 Total error band -20 to +85º C, -7 to 185º F Operating temperature range Storage temperature range Notes: 1) With reference to 25 º C, (77 º F) 2) Standard 105º C max. for cable version -50ºC 125ºC -58ºF 257º F -50ºC 125ºC -58ºF 257º F 2,3 2 3) Lower ranges available - consult factory 4) 0.5% max availability - consult factory Schaevitz® Sensors Division of Measurement Specialties 1000 Lucas Way Hampton, VA 22666 1-800-745-8008 Phone: 757-766-1500 A Division of www.msiusa.com 02/02 UltraStable 600 Mechanical Specifications Specification Value Proof pressure Burst pressure Vibration Shock Pressure cycles Media compatibility Environmental protection 3x rated pressure 4x rated pressure or 20k psi 20 G’s rms @2kHz 100G 11ms 1 million cycles 0 to full scale All materials compatible with 316 stainless steel IP 67 (Cable version) 1)Other materials available - consult factory Notes 2 1 2) Which ever is less, 10X burst available on some pressure ranges (consult factory) Ordering Information US6 US6 Output X Output Electrical Connection X - Connection Specials XXXXX Port type X Specials Port 3=.5 to 4.5V ratio (1) 1=Cable 2 feet For Non-Standard 2= 1/4-19 BSP 4= 1 to 5V 4 = Integral Packard the standard num- 4= 7/16-20 UNF 6= 0 to 5V 5 = PTIH-10-6P ber of “00000” 5=1/4-18 NPT - Pressure range XXXX Pressure Range PSI Ranges Bar Ranges (Bendix style) changes to a higher 6= 1/8-27 NPT 8=4-20 mA 6 = GSSR 300 (9.4 value .i.e 1XXXX 030P = 0 to 30 psi 005B = 0 to 5 Bar 050P = 0 to 50psi 007B = 0 to 7 Bar mm) (Square Special numbers 8 = PTIH-08-4P starting with a “C” (Bendix Style) are CE rated X= special port 002B = 0 to 2 Bar 100P =0 to 100psi 010B = 0 to 10 Bar 300P = 0 to 300psi 020B = 0 to 20 Bar 500P - 0 to 500psi 035B = 0 to 35 Bar x = Special 01KP = 0 to 1Kpsi 070B = 0 to 70 Bar Connection 03KP = 0 to 3Kpsi 200B = 0 to 200 Bar 05KP = 0 to 5Kpsi 350B = 0 to 350 Bar Example: US664-000005-100PG is an UltraStable 600 with 0 to 5V out, Packard Connector, nothing special, 1/4 NPT pressure port and 100 psi gage. US681-C00002- 005PG is an UltraStable 600 with 4-20 mA, 2-wire, output, 2 feet of cable, CE certified, 1/4 BSP male pressure port and 5 psi gage. A = absolute 001B = 0 to 1 Bar 7= 0 to 10V Hirshman) Pressure Units G = gauge 015P = 0 to 15 psi X=Special output Pressure unit X 1) For ratiometric output, span changes with input voltage (see supply voltage specifications) Schaevitz® Sensors Division of Measurement Specialties 1000 Lucas Way Hampton, VA 22666 1-800-745-8008 Phone: 757-766-1500 A Division of www.msiusa.com 02/02 UltraStable 600 6-pin 4-pin fl .875 fl .875 fl .875 www.powerandsignal.com Note: Mating connector is available with 3 ft of cable PN (2001140). Schaevitz® Sensors Division of Measurement Specialties 1000 Lucas Way Hampton, VA 22666 1-800-745-8008 Phone: 757-766-1500 A Division of www.msiusa.com 02/02