USLPT2819DT2TR

USLPT2819 Family – Low-profile Tactile Switches Applications • Portable electronic devices. • 3C products. • Smart phones. • Digital cameras. LPT Series – Low-Profile Tactile Switches Features • Compact size. • Low-profile. • Long operation life. • TE Connectivity is pleased to introduce its LPT Series of Low-Profile Tactile Switches. Given the various combinations of Size and Height measures offered by the LPT Series, these tactile switches are ideal for a wide variety of applications within the portable electronics market. The Low-Profile Tactile Switches will be characterised by SMT mounting available in Tab, Gull-Winged, and J-Bend terminations. Grounded options available. LPT Series – Family Classification Document #2337225-1 (08/10/18) Family USLPT (Ultra-Mini Size) MCSLPT (Micro-Mini Size) MSLPT (Mini Size) Body Size 2.6x1.6mm to 3.7x3.7mm 4.6x4.4mm to 4.8x4.8mm 5.2x5.2mm Height 0.35mm to 0.65mm 0.55mm to 1.05mm 0.80mm to 2.00mm Mounting Tab / J-Bend J-Bend Gull-Wing / J-Bend Grounding No No Yes Packaging Tape & Reel Tape & Reel Tape & Reel Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help USLPT2819 Family – Low-profile Tactile Switches USLPT Family – 2.8 x 1.9mm Contact Rating Contact Resistance Insulation Resistance Dielectric Strength Operating Force Travel Operating Life Operating Temperature Storage Temperature Features Applications • • • • • • Compact size. Extended operating life. Ultra-low profile. 10µA, 1VDC Min. 50mA, 12VDC Max. 500mΩ Max. 100MΩ Min. 100VDC 100VAC/1 Minute 160 ± 50gf (-1) 200 ± 50gf (-2) 0.13mm 300,000 Cycles Min. (-1) 150,000 Cycles Min. (-2) -40˚C to +85˚C -40˚C to +85˚C Digital cameras. Smart Phones. Portable electronic devices. Circuit Part Numbering Document #2337225-1 (08/10/18) Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help USLPT2819 Family – Low-profile Tactile Switches Diagrams PN List Smart PN Body Size Height Mounting Operation Force Packaging MOQ TE PN USLPT2819DT2TR 2.8 x 1.9mm 0.60mm Tab 160gf Tape and Reel 5,500 2337225-1 USLPT2819DT4TR 2.8 x 1.9mm 0.60mm Tab 200gf Tape and Reel 5,500 2337225-2 Document #2337225-1 (08/10/18) Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help USLPT2819 Family – Low-profile Tactile Switches 1. Style “Tactile Switches” are mainly used as signal switches of electric devices, with the general requirements of mechanical and electrical characteristic. 1.1 Operating Temperature Range: -40 ℃ to +85℃ 1.2 Storage Temperature Range: -40 ℃ to +85℃ 2. Current Range: 10µA, 1VDC Min. to 50mA, 12VDC Max. 3. Type of Actuation: Tactile feedback 4. Test Sequence: Item Description 1 Visual Examination Appearance Electrical Performance Test Conditions By visual examination check without any out pressure & testing. 2 Contact Resistance Applying a static load (1.5 to 2x actuating force) to the centre of the actuator. Measurements shall be made with a 1 kHz small current contact resistance meter. 3 Insulation Resistance Measurements shall be made following application of 100VDC potential across terminals and cover for 1 minute± 5 seconds. 4 Dielectric Withstanding Voltage 100VAC (50Hz or 60Hz 2mA) shall be applied across terminals and cover for 1 minute. 3 to 4 operations at a rate of 1 cycles per second Mechanical Performance Document #2337225-1 (08/10/18) 5 Requirements There shall be no defects that affect the serviceability of the product. 500mΩ Max. 100MΩ Min. There shall be no breakdown or flashover. 5 m seconds Max. Bounce Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help USLPT2819 Family – Low-profile Tactile Switches Operating Force Applied in the direction of operation. 7 Stroke Placing the switch such that the direction of switch operation is vertical and then gradually increasing the load applied to the centre of the actuator to a stop shall be measured. 0.13±0.05mm 8 Control strength Static load of 3Kg (29.4N) shall be applied in the operating direction of the control unit for 60 seconds. As shown in items 2 to 6. 6 Mechanical Performance 9 Durability 10 11 Document #2337225-1 (08/10/18) 200±50gf (1.961±0.49N) 1) Shall be free from pronounced backlash and falling-off or breakage Terminals. 2) As shown in item 2 to 5. Solder Heat Resistance (PCB is 0.8mm in thickness) Operating Life Measurements shall be made following the test forth below: 1) 5mA, 5VDC resistive load. 2) Rate of Operation: 2 to 3 operations per second. 3) Applying a static load the operating force to the centre of the actuator in the direction of operation. 4) Cycle of Operation= ■ 300,000 Cycles Min. (-1) ■ 150,000 Cycles Min. (-2) Vibration Shall be vibrated in accordance with Method 201A of MIL-STD-202F 1) Frequency: 10-55-10Hz in 1min/cycle. 2) Direction: 3 vertical directions including the direction of operation. 3) Test time: 2 hours each direction. As shown in item 2 to 6. Shall be shocked in accordance with Method 213B condition A of MIL-STD202F 1) Acceleration: 50G. 2) Action Time: 11±1m sec. 3) Testing Direction: 6 sides. 4) Test cycle: 3 times in each direction. As shown in item 2 to 6. Environmental Endurance 12 160±50gf (1.569±0.49N) Shock Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change 1) As shown in item 4 to 5. 2) Operating force: ±30% of initial force. 3) Contact Resistance: 1Ω Max. 4) Insulation Resistance: 10MΩ Min. 5) Bounce: 20m seconds Max. For Email, phone or live chat, go to: www.te.com/help USLPT2819 Family – Low-profile Tactile Switches 13 14 Low Temperature Resistance Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1 hour before the measurements are made: 1) Temperature: -40±2℃ 2) Time: 96 hours As shown in item 2 to 6. High Temperature Resistance Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1 hour before the measurements are made: 1) Temperature: 90±2℃ 2) Time: 96 hours As shown in item 2 to 6. Environmental Endurance 15 Humidity Resistance 16 Temperature Cycle Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1 hour before the measurements are made: 1) Temperature: 60±2℃ 2) Relative Humidity: 90 to 95% 3) Time: 96 hours 1) Test cycles: 5 cycles 2) Standard conditions after test: 1) As shown in item 4 to 6. 2) Contact resistance: Less than 1Ω. 3) Insulation resistance: More than 10MΩ. As shown in item 2 to 6. 5. Soldering Conditions: ■ Condition for Soldering USLPT Series: ■ The condition noted above is the temperature of the copper foil on the surface of the PCB. There are cases where the temperature of the board greatly differs from the surface of the switch. Do not allow the surface temperature of the switch to exceed 260℃. Document #2337225-1 (08/10/18) Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help USLPT2819 Family – Low-profile Tactile Switches ■ Manual Soldering Soldering Temperature: 350℃ Max. Continuous Soldering Time: 5 second Max. ■ Precautions in Handling 1. Care should be exercised so that flux from the top surface of the printed circuit board does not adhere to the switch. 2. Do not wash the switch. ■ Operating precautions 1. Do not actuate the switch with excessive force. 2. Discontinue force after the switch has been actuated so as to avoid deformation of the components of the switch. Deformation of the components may cause the switch to malfunction. 3. Align the plunger with the switch to insure proper operation. ■ Notes on storage conditions Avoid the following as exposure may affect the performance and/or the soldering of the switch: 1. Temperature of -10 to +40℃ & 85% humidity. 2. Exposure to corrosive gas. 3. Storage over 6 months 4. Exposure to direct sunlight. 5. Storage conditions should prevent heavy impact or loading. 6. After opening the package, unused switches must be repackaged in a moisture-proof and airtight environment. Document #2337225-1 (08/10/18) Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help