V23047-A1015-A501

General Purpose Relays Force Guided Relays SCHRACK Force Guided Relay SR2M n 2 pole relay with force guided contacts according to EN 50205 insulation between poles n Version P1 for use in sockets n Reinforced F0188-D Typical applications Emergency shut-off, press control, machine control, elevator and escalator control, safety relays ZT Approvals Coil Data (continued) Technical data of approved types on request Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10%1) mW 005 5 3.8 0.5 35.7 700 006 6 4.5 0.6 51 706 009 9 6.8 0.9 116 698 012 12 9 1.2 206 699 015 15 11.3 1.5 321 701 018 18 13.5 1.8 483 671 021 21 16 2.1 630 700 024 24 18 2.4 823 700 036 36 27 3.6 1851 700 040 40 30 4.0 2286 700 048 48 36 4.8 32911) 700 060 60 45 6 51421) 700 080 80 60 8 91431) 700 110 110 83 11 172851) 700 VDE 116064, UL E214025, TUV 968/EZ 111, CCC 2014010305743065 Contact Data Contact arrangement 1 form A + 1 form B contacts (1 NO + 1 NC) or 2 form C contacts (2 CO) According EN50205 only 1NO / 1NC (11-14 and 22-21 or 12-11 and 21-24) shall be used as force guided contacts. Rated voltage 250VAC Max. switching voltage 400VAC Rated current 6A Contact material AgNi Contact style single contact, force guided 1 form A + B, 1 NO + 1NC type A according to EN 50205 2 form C, 2CO type B according to EN 50205 Min. recommended contact load 5V/10mA Initial contact resistance ≤100mΩ at 1A, 24VDC ≤20Ω at 10mA, 5VDC Frequency of operation, with/without load 6/300min-1 Contact ratings, IEC60947-5-1, on 1 form A (NO) contact AC15 - 250V/3A DC13 - 24V/3A on the basis of DC13 - 24V/6A under conditions specified in product spec. 2158001 Mechanical endurance 10x106 operations 1) Coil resistance ±12%. All figures are given for coil without pre-energization, at ambient temperature +23°C. Insulation Coil Data Coil voltage range 11-2016, Rev. 1116 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company 5 to 110VDC Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Initial dielectric strength between open contacts 1500Vrms between contact and coil 4000Vrms between adjacent contacts 3000Vrms Clearance/creepage between open contacts microdisconnection between contact and coil ≥8/8mm between adjacent contacts ≥5.5/5.5mm Insulation to EN 50178, type of insulation between contact and coil reinforced between adjacent contacts reinforced Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose Relays Force Guided Relays SCHRACK Force Guided Relay SR2M (Continued) Other Data SR2M SR2M Plug-in Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40 to 70°C Category of environmental Protection IEC 61 810 RTIII RTII Weight 20g Resistance to soldering heat THT IEC 60068-2-20 260°C/5s Packaging/unit tube/20 pcs. PCB layout / terminal assignment Bottom view on solder pins 2 form C, 2 CO contacts For more detailed information see product specification 2158001 S0163-CO Accessories For details see datasheet Accessories Force Guided Relay SR2M plugin NOTE: indicated contact ratings and electrical endurance data for direct wiring of relays (according IEC 61810-1); for relays mounted on sockets deratings may apply. S0163-BJ Dimensions 1 form A + 1 form B contacts, 1 NO + 1 NC SR2M S0163_CU S0273-BB SR2M Plug-In 3,6 S0163-CV 2 11-2016, Rev. 1116 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. General Purpose Relays Force Guided Relays SCHRACK Force Guided Relay SR2M (Continued) Product code structure Typical product code V23047 -A1 012 -A 5 11 Type V23047 Relay with force guided contacts SR2M Version A1 standard P1 Plug-In Coil Coil code: please refer to coil versions table (e.g. 024=24VDC) Contact set A single contact Contact material 5 AgNi Contact configuration 01 2 form C contacts (2 CO) 11 1 form A + 1 form B contacts ( 1 NO + 1 NC) Other types on request Product code Version Cont. material Contact arrangement Coil Part number V23047-A1005-A501 V23047-A1005-A511 V23047-A1006-A501 V23047-A1006-A511 V23047-A1009-A501 V23047-A1009-A511 V23047-A1012-A501 V23047-A1012-A511 V23047-A1018-A501 V23047-A1018-A511 V23047-A1021-A501 V23047-A1021-A511 V23047-A1024-A501 V23047-A1024-A511 V23047-A1036-A501 V23047-A1036-A511 V23047-A1040-A501 V23047-A1040-A511 V23047-A1048-A501 V23047-A1048-A511 V23047-A1060-A511 V23047-A1110-A501 V23047-A1110-A511 V23047-P1005-A501 V23047-P1009-A501 V23047-P1012-A501 V23047-P1021-A501 V23047-P1024-A501 V23047-P1036-A501 V23047-P1110-A501 Standard wash tight AgNi 2 form C (CO) 1 A + 1 B, (1 NO + 1 NC) 2 form C (CO) 1 A + 1 B, (1 NO + 1 NC) 2 form C (CO) 1 A + 1 B, (1 NO + 1 NC) 2 form C (CO) 1 A + 1 B, (1 NO + 1 NC) 2 form C (CO) 1 A + 1 B, (1 NO + 1 NC) 2 form C (CO) 1 A + 1 B, (1 NO + 1 NC) 2 form C (CO) 1 A + 1 B, (1 NO + 1 NC) 2 form C (CO) 1 A + 1 B, (1 NO + 1 NC) 2 form C (CO) 1 A + 1 B, (1 NO + 1 NC) 2 form C (CO) 1 A + 1 B, (1 NO + 1 NC) 5VDC 1393258-2 7-1415006-1 3-1415011-1 6-1415011-1 1393258-3 7-1415011-1 1393258-4 1393258-5 1393258-8 1393258-9 1-1393258-1 1-1393258-2 1-1393258-5 1-1393258-7 2-1393258-0 8-1415011-1 2-1393258-1 2-1393258-2 3-1415006-1 9-1415011-1 2-1393258-3 1-1415012-1 2-1415012-1 7-1415543-4 7-1415543-5 7-1415543-6 7-1415543-7 7-1415543-8 7-1415543-9 8-1415543-0 Plug-in for socket use 2 form C (CO) 1 A + 1 B, (1 NO + 1 NC) 2 form C (CO) 6VDC 9VDC 12VDC 18VDC 21VDC 24VDC 36VDC 40VDC 48VDC 60VDC 110VDC 5VDC 9VDC 12VDC 21VDC 24VDC 36VDC 110VDC 11-2016, Rev. 1116 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 3