V23105A5501A201.

Signal Signal Relays AXICOM D2n* Relay V23105 n Standard DIL relay 20x10x11mm (.795x.394x.433”) n Switching and continous current 3A n 2 form C contacts (2 CO, 2 changeover contacts) n Immersion cleanable n Four different coil sensitivities, 150mW, 200mW, 400mW, >500mW n Surge voltage resistance meets FCC Part 68 requirement: 1.5kV (10/700μs) between coil and contacts n Dimensions Typical applications Communications equipment, office equipment, measurement and control equipment, entertainment electronics, medical equipment, consumer electronics. Approvals UL 508; UL/CSA 60950-1 File No. E 111441 Technical data of approved types on request Contact Data Contact arrangement 2 form C (CO) Max. switching voltage 220VDC, 250VAC Rated current 3A Limiting continuous current, 85°C 3A Contact material AgNi, gold-covered Min. recommended contact load 10mA at 20mV Minimum switching voltage 100μV Initial contact resistance 500mW coil power 501 5 3.5 6.1 0.25 36 695 502 6 4.2 7.3 0.30 70 515 506 9 6.3 10.9 0.45 140 580 503 12 8.4 14.5 0.60 280 515 505 24 16.8 29.1 1.20 1050 550 507 48 33.6 58.1 2.40 4000 575 All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. 10-2017, Rev. 1017 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 Signal Signal Relays AXICOM AXICOM Telecom-, Signal and RF Relays 108-98007 Rev A D2n V23105 RelayV23105 (Continued) D2n* Relay Coil Operating Range Coil Data (continued) Coil Data (continued) 3.0 150 mW coil 150 mW 2.8 2.6 , Signal and RF Relays 2.0 1.8 1.6 AXICOM 1.4 Telecom-, Signal and RF Relays 1.2 108-98007 Rev A Unom. nominal coil voltage 1.0 D2n V23105 Relay 0.8 V23105 Relay 2.6 2.4 2.2 Coil Voltage [U/Unom] COM Coil Voltage [U/Unom] 2.2 0.4 Coil Operating Range -20 -10 0 10 3.0 Uop. min. Urel. min. Umax. at400 0400 AmW mW coil Umax. at 2 x 1 A max. at 0 A UUmax. at 2 x 2 A Umax. at 2 x 1 A UUmax. at 0 A max. at 2 x 2 A Umax. at 2 x 1 A Umax. at 2 x 2 A 2.2 2.4 2.6 2.0 2.2 2.4 1.82 2.2 Unom. nominal coil voltage Unom. 0.2 0.4 0.6 -20 -10 0 10 0.20 100 110 120 -30 -20 -10 0.03 -30 2.8 -20 -10 0 0 Uop. min. Urel. min. 30 40 50 60 70 80 Ambient Temperature [°C] 20 30 40 50 60 70 80 Ambient Temperature [°C] 20 30 40 50 60 70 80 Ambient Temperature [°C] 2.6 2.8 3.0 2.4 2.6 2.8 2.2 Voltage [U/U nom] nom] Coil Coil Voltage nom] [U/U Coil[U/U Voltage Umax. at 0 A Umax. at 2 x 1 A Umax. at 2 x 2 A 20 10 10 3.0 Umax. at 0400 AmW coil 400 mW Umax. at 2 x 1 A Umax. at 2 x 2 A 2.4 2.6 2 2.2 2.4 1.8 2.0 2.2 1.6 90 1.8 2.0 1.4 1.6 1.8 1.2 1.4 1.6 Unom. nominal coil voltage 1 1.2 1.4 0.8 1.0 1.2 0.6 0.8 1.0 0 0.2 0.4 120 0.0 0.2 Unom. Uop. min. Urel. min. Uop. min. U rel. min. Uop. min. Unom. -30 -20 -10 -30 -20 -10 0 0 0.0 100 110 120 400 mW coil 400 mW 200 mW coil 200110 mW 100 120 400 mW coil 400 mW Umax. at 0 550A mW coil 550 mW Umax. at 2 x 1 A UUmax. at 0 A max. at 2 x 2 A Umax. at 2 x 1 A Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 1 A Umax. at 2 x 2 A 0.2 0.4 0.6 Uop. min. 110 U100 rel. min. Uop. min. Urel. min. Uop. min. Urel. min. Uop. min. 110 120 U100 rel. min. 90 100 110 120 90 0.4 0.6 0.8 C] C] 108-98007 Rev A Unom. nominal coil voltage 0.8 1.21 0.6 0.8 1.0 0 100 110 120 -30 3 150 mW coil 150 mW 0.4 0.6 0.8 150 mW coil 150 mW 90 90 2.8 200 mW coil 200 mW 0.0 0.2 0.4 -30 80 80 -30 -20 -10 0 10 10 20 30 40 50 60 70 80 Ambient Temperature [°C] 20 30 40 50 60 70 80 Ambient Temperature [°C] 10 20 30 40 50 60 70 80 U 90 100 110 120 rel. min. 2.6 3.0 2.4 2.8 2.2 Coil[U/U Voltage Coil Voltage nom][U/Unom] n V23105 Relay 90 70 2.6 1.8 100 110 120 90 100 110 120 Coil Voltage [U/Unom] 2.2 1.6 RF Data 1.4 1.8 1.2 Isolation at 100MHz/900MHz Insertion loss at 100MHz/900MHz 1.2 Voltage standing wave ratio (VSWR) 0.6 1.0 Unom. Uop. min. at 100MHz/900MHz 0.4 -39.0dB/-20.7dB -0.02dB/-0.27dB 1.6 Unom. nominal coil voltage 1 1.4 0.8 1.04/1.40 Urel. min. 0.6 0 0.4 Other0 Data 10 20 30 40 50 60 70 -30 -20 -10 80 Uop. min. U rel. min. 90 100 110 120 Ambient Temperature [°C] Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at -10 0 10 20 30 40 50 60 70 80 90 100 110 120 3.0 Ambient Temperature [°C] www.te.com/customersupport/rohssupportcenter 550 mW coil 550 mW 2.8 Ambient temperature -40 to +85°C 2.6 Category of environmental protection Umax. at 0 A 2.4 IEC 61810 RT III -wash tight Umax. at 2 x 1 A 2.2 Umax. at 2 x 2 A Vibration resistance (functional) 10g, 10 to 55Hz 2.0 Shock resistance (functional) 1.8 IEC 60068-2-27 (half sine) 10g Unom1.6 = Nominal coil voltage Shock resistance (destructive) 50g 1.4 Terminal type PCB-THT Umax. = Upper limit of the operative range of the coil voltage (limiting 1.2 Weight max. 6g voltage) when coils are continously energized 1.0 Unom. Resistance to soldering heat THT 0.8 IEC 60068-2-20 265°C/10s Uop. min. = Lower limit of the operative range of 0.6 Ultrasonic not recommended the coil voltagecleaning (reliable operate voltage) Uop. min. 0.4 Packaging unit 1000 pcs. Urel. min. 0.2 0.0 -30 -20 0.2 = Lower limit of the operative range of Urel. min. -30 the coil voltage (reliable release voltage) -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 Ambient Temperature [°C] 5 of 12 Terminal assignment TOP view on component side of PCB 2.0 Unom = 1.8 Nominal coil voltage 1.4 1.2 Umax. = Upper limit of the operative range of the coil voltage (limiting voltage) when coils are continously energized Unom. 1.0 0.6 0.0 -30 TOP on(reliable component side of the coilview voltage operate voltage) -10 0 10 20 30 40 50 60 70 PCB Urel. min. = Lower limit of the operative range of the coil voltage (reliable release voltage) the coil voltage (reliable release voltage) -20 Upper limit of the operative range of the coil voltage (limiting PCB limit layout Uop. min. = Lower of the operative range of Uop. min. Urel. min. the coil voltage (reliable operate voltage) 0.4 Nominal coil voltage voltage) when coils are continously energized 0.2 = Lower limit of the operative range of Urel. min. 80 90 100 110 120 Ambient Temperature [°C] All specifications subject to change. Consult Tyco Electronics for latest specifications. 10-2017, Rev. 1017 www.te.com © 2015 Tyco Electronics Corporation, a TE ConnectivityUnom Ltd.=company. Nominal coil voltage Umax. = 5 of 12 5 of 12 o Electronics for latest specifications. 2 max. 2pF max. 4pF max. 2 pF 0.2 0.8 100 110 120 1050V 1750V 1050V > 109Ω 2.0 0.8 Uop. min. = Lower limit of the operative range of Uop. min. Urel. min. 750Vrms 1250Vrms 750Vrms Umax. at 2 x 2 A 2.2 Umax. at 0 A Umax. at 2 x 1 A Umax. at 2 x 2 A 2.4 Umax. = C] 2.4 2.8 Unom1.6 = 90 2 3.0 Ambient Temperature [°C] 550 mW coil 550 mW All specifications subject to change. Consult Tyco Electronics for latest specifications. Umax. at 0 A Umax. at 2 x 1 A Umax. at 2 x 2 A 80 2.6 0.0 90 108-98007 Rev A Initial dielectric strength between open contacts between contact and coil Uop. min. between adjacent contacts Urel. min. Initial surge withstand voltage between open contacts -20 -10 0 10 20 30 40 50 60 coil 70 80 90 100 110 120 between contact and 200 mW coil Ambient Temperature [°C] between adjacent contacts 200 mW Initial insulation resistance at 500 VDC Capacitance mW coil Umax. at 0550AmW 550 Umax. at 2 x 1 A between open contacts Umax. at 2 x 2 A between contact and coil Umax. at 0 A between adjacent contacts Umax. at 2 x 1 A Unom. nominal coil voltage 1 Coil Voltage [U/Unom] -, Signal and RF Relays 80 60 2.6 2.8 3.0 Coil Voltage [U/U nom][U/U Coil Coil Voltage [U/U nom] nom] Voltage COM 90 50 Ambient Temperature [°C] 1.6 1.8 2.0 1.4 1.6 1.8 1.2 1.4 1.6 1.0 1.2 1.4 Insulation Data 1.2 0.2 40 2.4 2.6 2.8 Umax. at 0 A Umax. at 2 x 1 A Umax. at 2 x 2 A 80 30 2.83 150 mW coil 150 mW C] 20 1.4 0.4 0.0 200 mW coil Nominal coil voltage 200 mW Upper limit of the operative range of the coil voltage (limiting voltage) when coils are continously energized Umax. at 0 A Lower limit of the operative range Umax. at 2 xof1 A the coil voltage (reliable operate voltage) Umax. at 2 x2A Lower limit of the operative range of the coil voltage (reliable release voltage) 1.6 0.6 0.2 -30 2 1.8 0.8 Uop. min. Urel. min. 0.6 Unom Umax Uop. min. Urel. min. 2.8 Umax. at 0 A Umax. at 2 x 1 A Umax. at 2 x 2 A 2.4 Coil operative range graphs 3 Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Upper limit of the operative range of the coil voltage (limiting voltage) when coils are continously energized Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. Signal Signal Relays AXICOM D2n* Relay V23105 (Continued) Dimensions Packing Product code structure Typical product code V23105-A5 001 A201 * Type V23105-A5 D2n Series Signal Relay Coil Coil code: please refer to coil versions table 0xx 150 mW 4xx 400 mW 3xx 200 mW 5xx 550 mW Contacts A201 2 from C, 2 CO, AgNi-Au contacts * Version re-designed Product code Version Coil power Coil voltage Part Number V23105A5001A201* V23105A5002A201* V23105A5006A201* V23105A5003A201* V23105A5005A201* V23105A5308A201* V23105A5301A201* V23105A5302A201* V23105A5306A201* V23105A5303A201* V23105A5305A201* V23105A5307A201* V23105A5401A201* V23105A5402A201* V23105A5406A201* V23105A5403A201* V23105A5405A201* V23105A5407A201* V23105A5501A201* V23105A5502A201* V23105A5506A201* V23105A5503A201* V23105A5505A201* V23105A5507A201* V23105A5475A201* V23105A5479A201* V23105A5476A201* V23105A5477A201* V23105A5478A201* AgNi+Au contacts 150mW 5VDC 6VDC 9VDC 12VDC 24VDC 3VDC 5VDC 6VDC 9VDC 12VDC 24VDC 48VDC 5VDC 6VDC 9VDC 12VDC 24VDC 48VDC 5VDC 6VDC 9VDC 12VDC 24VDC 48VDC 5VDC 10VDC 12VDC 24VDC 48VDC 8-1393792-5 8-1393792-7 9-1393792-1 8-1393792-8 9-1393792-0 1393793-5 9-1393792-3 9-1393792-5 1393793-2 9-1393792-7 9-1393792-9 1393793-3 1393793-6 1393793-7 1-1393793-0 1393793-8 1393793-9 1-1393793-1 1-1393793-6 1-1393793-8 2-1393793-3 1-1393793-9 2-1393793-1 2-1393793-4 1-1393793-2 3-1393794-0 1-1393793-3 1-1393793-4 1-1393793-5 10-2017, Rev. 1017 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company. 200mW 400mW >500mW BT 47 type spec T4563C (current tested) Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. 3