VF4-15F13

Catalog 1308242 Issued 3-03 TYCO ELECTRONICS VF4 series 40 Amp Relay With PC Board or Quick Connect Terminals for Automotive Applications Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data • 40A continuous contact rating @ 85°C. • 1 Form A and 1 Form C arrangements. • Plug-in or PC board terminals. • Optional mounting bracket. • Various enclosure options. Must Operate and Must Release Voltage: See Coil Data table. Initial Operate Time: 7 milliseconds, typical, with rated coil voltage applied. Initial Release Time: 2 milliseconds, typical, with zero volts applied (for unsuppressed relays after having been energized at rated coil voltage.) Environmental Data Conditions All parametric, environmental and life tests are performed according to EIA Standard RS-407-A at standard test conditions (23°C Ambient, 20-50% RH, 29.5 ± 1.0" Hg.) unless otherwise noted. Contact Data Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: AgNi 0.15 (consult factory for other contact materials). Max. Switching Rate: 20 operations per second with no contact load. 6 operations per minute for rated life at rated load. Max. Switching Voltage: 75VDC(1). Max. Load Current (@ 14VDC Load Voltage): Load Max. Continuous Current Max. Make Current (2) Max. Break Current (1) Form A (NO) NO Form C NC 60A 120A 60A 60A 120A 60A 40A 45A 40A Max. Switching Power: 50-500 watts DC (voltage dependent) (1). Min. Recommended Current: 1 amp @ 12VDC. Initial Voltage Drop: 200 millivolts, maximum, for normally open contacts @ 40 amp contact load. 250 millivolts, maximum, for normally closed contacts @ 30 amp contact load. Expected Life: 10 million operations, mechanical; 100,000 operations at 40 amps, 14VDC, resistive load on normally open contact. Initial Dielectric Strength Temperature Range: Storage: -40°C to +155°C. Operating: -40°C to +125°C (4). Shock: 20g, 11 milliseconds, half sine wave pulse. Vibration: (For NC contacts, NO contacts are significantly higher.) 10-40 Hz., 1.27mm double amplitude. 40-70 Hz., 5 g's constant. 70-100 Hz., 0.5mm double amplitude. 100-500 Hz., 10 g's constant. Mechanical Data Termination: 0.250" quick connect and printed circuit terminals. Enclosures: Dust Cover: Protects relay from dust. For use in passenger compartment or enclosures. Shrouded Dust Cover: Protects relay and relay connector (order separately) from dust and splash. Weatherproof Cover: Mates with a connector (order separately) to seal relay from salt spray etc. Recommended for under hood application. Cover Retention: Dust cover will withstand a 33.7 pound (150 Newton) force (axially applied) without detachment. Ultrasonic cover: 50 pound (220 Newton). Weight: 31g (1.1 oz.) approximately (dust cover model). Abnormal Operation Overload Current: Consult factory. 24V Jump Start: 24VDC for 5 minutes conducting rated contact current @ 23°C. Drop Test: Capable of meeting specifications after a 3.28 foot (1.0 meter) drop onto concrete. Flammability: UL94V-0 external; UL94-HB or better, internal parts (meets FMVSS 302). Notes Between Contacts and Coil: 500V rms. Coil Data Voltage: 6, 12 and 24VDC. Resistance: See Coil Data table. Nom. Power: (@ 23°C coil temp. and rated coil voltage.): 1.6W, unsuppressed. 1.81W, with 680 ohm resistor. Thermal Resistance: 50°C per actual coil watt in still air with no contact load current. (1) See Figure 1. (2) Inrush current for lamp load. (3) Allowable overdrive is rated at ambient temperature for 23°C or 85°C as stated with no load current flowing through the relay contacts and minimum coil resistance. Also see Figure 2 for maximum ambient temperature versus applied coil voltage. (4) See Figure 2. (5) Current and times are compatible with circuit protection by a typical automotive circuit breaker. Relay will make, carry and break the specified current. Coil Data Coil Designator Rated Coil Voltage (VDC) Coil Resistance ±10% (Ohms) Coil Inductance (H) (Ref.) Must-Operate Voltage (VDC) Must-Release Voltage (VDC) D F H 6 12 24 22.5 90 360 0.2 0.8 2.7 3.6 7.2 14.4 0.6 1.2 2.4 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. Allowable (3) Overdrive (VDC) @ 23°C @ 85°C 10.1 20.2 40.5 7.9 15.7 31.5 www.tycoelectronics.com Technical support: Refer to inside back cover. 1017 Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Figure 1 – Limiting Curve for Power Load 75 Safe breaking, arc extinguished (normally open contact) for resistive loads. Switching Voltage (VDC) 60 50 40 30 50 0W 20 20 0W 10 0W 10 0.5 1 2 3 5 4 7 10 20 30 40 Switching Current (Amps) Figure 2 – Ambient Temperature vs. Coil Voltage for Continuous Duty 130 Assumptions: 1. Thermal resistance = 50°C per watt 2. Still air 3. Nominal coil resistance 4. Maximum mean coil temperature = 180°C 5. Coil temperature rise due to load = 2°C @ 8 amps = 5°C @ 16 amps = 11°C @ 24 amps = 20°C @ 32 amps = 32°C @ 40 amps 6. Thermal resistance and power dissipation based on coil resistance at 180°C 7. Curves are based on 1.6 watts at 23°C 8. When full lifetime is at high ambient and high load current, subtract 25°C from maximum allowable ambient temperature. Maximum Allowable Ambient Temperature ( °C) 120 110 100 90 80 70 0 Amp Contact Load 8 Amp Contact Load 16 Amp Contact Load 60 24 Amp Contact Load 50 32 Amp Contact Load 40 40 Amp Contact Load 30 90 95 100 105 110 115 120 125 130 135 140 145 150 Applied Coil Voltage (% of Rated Nominal) Ordering Information Part Number VF4-11 * VF4-11 * VF4-15 * VF4-15 * VF4-25 * VF435 * VF4-41 * VF4-45 * VF4-45 * VF4-51 * VF4-55 * VF4-61 * VF4-65 * VF4-81 * VF4-85 * 11 13 11 13 11 11 11 11 21 11 11 11 11 11 11 *Standard Coil Voltages: Contact Arrangement Contact Material Enclosure Terminals 1 Form A 1 Form A 1 Form C 1 Form C 1 Form C 1 Form C 1 Form A 1 Form C 1 Form C 1 Form A 1 Form C 1 Form A 1 Form C 1 Form A 1 Form C AgNi0.15 AgNi0.15 AgNi0.15 AgNi0.15 AgNi0.15 AgNi0.15 AgNi0.15 AgNi0.15 AgSnO AgNi0.15 AgNi0.15 AgNi0.15 AgNi0.15 AgNi0.15 AgNi0.15 Dust cover Dust cover Dust cover Dust cover Shrouded dust cover Weatherproof cover Dust cover with bracket Dust cover with bracket Dust cover with bracket Shrouded dust cover with bracket Shrouded dust cover with bracket Weatherproof cover with bracket Weatherproof cover with bracket Dust cover with molded bracket Dust cover with molded bracket Quick connect Printed circuit Quick connect Printed circuit Quick connect Quick connect Quick connect Quick connect Quick connect Quick connect Quick connect Quick connect Quick connect Quick connect Quick connect D = 6VDC (Consult factory for availability). F = 12VDC H = 24VDC (Consult factory for availability). Optional Coil Suppression Add suffix -S07 for 180 ohm resistor in parallel with 6VDC coil. Add suffix -S01 for 680 ohm resistor in parallel with 12VDC coil. Add suffix -S08 for 2,700 ohm resistor in parallel with 24VDC coil. Epoxy Sealed Construction Add suffix -C01 for epoxy sealed unit. Add suffix -C05 for epoxy sealed unit with resistor. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. VF4-15F11 VF4-15F13 VF4-45F11 VF4-15H11 VF4-15H13 VF4-65F11-S01 Dimensions are shown for 1018 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Outline Dimensions Dust Cover With Quick Connect Terminals Plastic Bracket Cover With Quick Connect Terminals VF4-1_ _ (Without Bracket) & VF4-4_ _ (With Bracket) VF4-8_ _ _ _ 1.10 MAX. (28.0) .59 (15.0) .236 (6.0) .638 (16.2) ø .209 (5.3) .866 ± .020 (22.0 ± 0.5) .197 (5.0) .170 ± .008 (4.32 ± 0.2) .236 ± .015 (6.0 ± 0.4) .079 ± .008 (2.0 ± 0.2) 1.10 MAX. (28.0) 1.10 MAX. (28.0) 1.004 MAX. (25.5) .622 ± .024 (15.8 ± 0.61) ø.213 ± .004 (5.4 ± 0.1) 1.004 MAX. (25.5) .453 MAX. (11.5) .250 (6.3) .453 MAX. (11.5) .250 (6.3) 1.10 MAX. (28.0) .315 (8.0) .032 ±.001 (0.81 ± 0.03) .250 (6.3) .122 (3.1) 86 30 Printed Circuit Board Terminals 87A .661 (16.8) Clinchable Power 87 85 .098 (2.50) .331 (8.4) .705 (17.9) TERMINALS #30, 87, & 87a Single Pin .126 (3.2) .098 (2.50) TIN PLATED Shrouded Dust Cover With Quick Connect Terminals Weatherproof Cover With Quick Connect Terminals VF4-2_ _ (Without Bracket) & VF4-5_ _(With Bracket) VF4-3_ _ (Without Bracket) & VF4-6_ _(With Bracket) .355 (9.0) .653 ± .066 (16.6 ± 0.15) .732 (18.6) .354 (9.0) .26 (6.6) .886 (22.5) .728 ± .010 (18.5 ± 0.25) .252 (6.4) 1.516 MAX. (38.0) .453 MAX. (11.5) 1.77 ± .019 (45.0 ± 0.5) .285 (7.25) .165 ± .006 (4.20 ± 0.15) .453 MAX. (11.5) .167 (4.25) .16 MAX. (4.1) .482 (12.25) .250 TYP. (6.3) .245 (6.3) 1.26 MAX. (32.0) .984 MAX. (25.0) 1.42 MAX. (36.1) .157 (4.0) .295 ±.018 (7.5 ± 0.45) .775 ± .006 (19.7 ± 0.15) .453 ± .006 (11.50 ±0.15) 1.42 MAX. (36.1) .276 REF. (7.0) 1.26 MAX. (32.0) .331 (8.4) 30 87A 86 85 .331 (8.4) 87 .705 (17.9) 87 86 .315 (8.0) .177 (4.5) 30 85 87a .705 (17.9) .472 ± .015 (12.0 ± 0.38) .661 (16.8) .66 (16.8) .354 (8.0) Suggested PC Board Layouts (Bottom Views) VF4-XXX13 Wiring Diagrams (Bottom Views) 1 Form A 1 Form C 86 86 87 30 85 1019 87a Dimensions are shown for reference purposes only. 30 RESISTOR IF USED 85 .331 (8.4) VF4-XXX12 .102 (2.6) .661 (16.8) .315 (8.0) 87 RESISTOR IF USED Dimensions are in inches over (millimeters) unless otherwise specified. .055 (1.4) .705 (17.9) .331 (8.4) Specifications and availability subject to change. .331 (8.4) .071 .102 (1.8) (2.6) .661 (16.8) .055 (1.4) .803 (20.4) .055 (1.4) .197 (5.0) .098 (2.5) .315 (8.0) .331 (8.4) www.tycoelectronics.com Technical support: Refer to inside back cover. 1019 Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Connectors Connectors For Use With Quick Connect Terminal VF4-1_ _ _ _ , VF4-4_ _ _ _ And VF4-8_ _ _ _ Relays Wiring Harness Style Connector (order terminals separately) PC Board Socket VCF4-1000 .274 (7.0) .111 (2.8) .040 (1.0) VCF4-1001 .295 (7.5) .256 (6.5) .083 (2.1) .512 (13.0) .571 (14.5) .805 (20.4) 1.043 (26.5) .945 (24.0) .092 (2.3) 5 HOLES .665 (16.9) .945 (24.0) .090 (2.3) .083 (2.1) 2 LOCATING PINS .705 (17.9) .143 (3.6) .315 .331 (8.0) (8.4) 1.043 (26.5) .905 (23.0) Wiring Harness Style, Bracket Mount Socket (order terminals separately) (Mount individually or can be interlocked) Connector For Use With VF4-2_ _ _ _ or VF4-5_ _ _ _ Relays With Shrouded Dust Cover (order terminals separately) VCF4-1002 VCF4-1003 .36 (9.1) 1.09 (27.6) 2 .315 (8.0) 1.20 (30.5) 1.31 (33.3) 24A111 terminal retainer supplied with connector 4 1.00 (25.4) 3 .331 .661 (8.4) (16.8) 1 .48 (12.2) 1.57 (39.9) 1.11 (28.1) 1.42 (36.1) 5 .218 (5.5) .331 (8.4) .705 (17.9) Connector For Use With VF4-3_ _ _ _ or VF4-6_ _ _ _ Relays With Weatherproof Cover Connectors to mate with the weatherproof cover relays are available from Delphi Packard (1-800-PACKARD). (Typical Delphi Packard part number: 12065685). Connector/Terminal Usage Chart - Our authorized distributors are more likely to stock boldface items. Required Crimp Terminals (Order Separately) Connector Terminal P/N Alternate P/N Wire AWG VCF4-1000 None 26A1349A 26A1349B 26A1348A 26A1348B 26A1348C None AMP 60249-1 AMP 42281-1 Packard 12015864 Packard 12015865 Packard 12084588 N/A 12-16 14-18 18-20 14-16 10-12 VCF4-1001 VCF4-1002 VCF4-1003 Dimensions are shown for 1020 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Qty. Required Form A 0 Form C 0 4 5 4 5 Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover.