Catalog 1308940 Revised 09-14
Connectors for Aerospace,
Defense and Marine
te.com
© 2014 TE Connectivity Ltd. family of companies. All Rights Reserved
1308940 ADM 1.5m MS 09/2014
TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Other logos, product and/or
company names might be trademarks of their respective owners.
Global Contacts
Connectors for Aerospace, Defense and Marine
Markets Served
Americas
United States – Harrisburg, PA
Product Information Center:
(Technical Support)
+800-522-6752
Phone:
Fax:
+717-986-7575
Menlo Park, CA 94025-1164
USA
Phone:
+1-800-926-2425
+1-650-361-3860
+1-717-986-7575
Fax:
Asia
Phone:
+86-400-820-6015
Europe
Italy
Phone:
+39-011-401-2632
Czech Republic
Phone:
+420-800-701-462
Baltic Regions
Phone:
+46-8-5072-5000
Nordic
Phone:
++46-8-5072-5000
Poland
Phone:
Benelux
Phone:
+31-73-6246-999
Spain/Portugal
Phone:
+34-93-2910366
Hungary
Phone:
+36-809-874-04
France
Phone:
Switzerland
Phone:
+41-52-633-66-26
Russia
Phone:
Austria
Phone:
C4ISR
Commercial Aerospace
Ground Defense
Military Aerospace
Military Marine
Missile Defense
+43-1-905-601-228
+33-1-34-20-86-86
Germany
Phone:
+49-6251-133-1999
United Kingdom
Phone:
+44-800-267-666
Need more information?
Web Site
Technical Support is staffed
with specialists well versed
in all TE Connectivity
products. They can provide
you with:
■ Technical Support
■ Catalogs
■ Technical Documents
■ Product Samples
■ TE Authorized Distributor
Locations
© 2010, 2006, 2003, 2002 and 2014 by
TE Connectivity
All Rights Reserved.
Offshore / Civil Marine
Space
ACTION PIN, AMP, AMP-BLADE,
AMP-HDI, AMP-O-LETRIC,
AMP-O-MATIC, AMP-TAPEMATIC,
AMP-TAPETRONIC, AMPLIMITE,
AMPMODU, AMPOMATOR,
CEELOK FAS-T, CERTI-CRIMP,
COAXICON, COPALUM, DEUTSCH, DIAMOND GRIP, DYNA-CRIMP, FASTON,
FORTIS ZD, HOLTITE, JACKMATE,
LEPRA/CON, LGH, MATE-N-LOK,
MEZALOK, MINIRAY, MULTIGIG RT,
NANONICS, OSP, PIDG, PRO BEAM,
PRO-CRIMPER, SOLISTRAND,
STRATO-THERM, T-HEAD, TE (logo)
TERMI-POINT, TERMINYL,
TETRA-CRIMP, TE CONNECTIVITY,
ULTRA-LITE are trademarks of TE group
+48-800-702-309
+7495-790-790-2
Visit www.te.com/ADM
for additional information
on all our products and
market segments for the
Aerospace, Defense and
Marine markets.
of companies and its licensors.
Other products, logos, and company
names mentioned herein may be
trademarks of their respective owners.
Disclaimer
All information, including illustrations, is
believed to be reliable. Users, however,
should independently evaluate the
suitability of each product for their
application. TE Connectivity makes no
warranties as to the accuracy or
completeness of the information, and
disclaims any liability regarding its use.
TE Connectivity only obligations are
those in the Standard Terms and
Conditions of Sale for these products
and in no case will TE Connectivity be
liable for any incidental, indirect or
consequential damages arising from the
sale, resale, use, or misuse of the
product.
TE Specifications are subject to change
without notice. In addition,
TE Connectivity reserves the right to
make changes in materials or processing
without notification to the Buyer which
do not affect compliance with any
applicable specification.
Export of TE products may require
licensing.
www.te.com/ADM
Printed in the U.S.A.
TE Connectivity
www.te.com/ADM
Connectors for Aerospace, Defense and Marine
Introduction
For 50+ years, we have
been helping the aerospace, defense and marine
industry reach new levels
of performance with specific
product solutions. Built on
the foundation of AMP
Incorporated, which
originated in 1941 as
Aircraft Marine Products,
TE Connectivity is now the
home of an unmatched
array of quality components
for the MIL-Aero market.
TE has grown to become
the world’s largest manufacturer of passive electronic
components, as well as a
world leader in fiber optic
active components. We are
also one of the largest RF
component and subsystem
manufacturers in the
industry.
In addition to our broad
offering of interconnection
solutions for copper and
fiber, cable and harness
assemblies,our portfolio
also includes printed circuits,
touch screens, relays, highreliability lasers, aircraft
sensors, plus nano- and
micro-lens connectors for
free space optical interconnect applications. In short,
we have the products to
meet your MIL-Spec, QPL,
space-qualified and COTS
requirements.
■
Design and development
engineering and analysis
■
Reliability, quality
assurance, testing and
agency approvals
■
Materials engineering
expertise in metals,
polymers and plating
■
Technology leadership in
electromagnetic and
shielding analysis and
high-speed circuit design
■
Program management
We’re committed to working
with you to design the next
generation of aerospace
and defense products —
and delivering costeffective performance and
innovative solutions through
capabilities such as:
i
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Connectors for Aerospace, Defense and Marine
Table of Contents
Printed Circuit Board Connectors
High Speed Board Level Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3 to 1-10
AMP MIL-Spec PCB Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-11
Mini-Box .050 [1.27] Centerline Connectors . . . . . . . . . . . . . . . . . . . . . . . . . .1-12 to 1-29
AMP-HDI .075 [1.91] Staggered Centerline LRM Connectors . . . . . . . . . . . . .1-30 to 1-37
Box .075 [1.91] Centerline Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-38 to 1-44
Box .100 [2.54] Centerline Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-45 to 1-78
Box II Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-79 to 1-90
AMPMODU .100 [2.54] Centerline Connectors per MIL-C-55302 . . . . . . . . . .1-91 to 1-98
AMP-BLADE Two-Piece Printed Circuit Edge Connectors . . . . . . . . . . . . . .1-99 to 1-106
RF Connectors
Military Qualified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4 to 2-34
Push-On Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-35 to 2-61
Threaded Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-62 to 2-75
Coaxial Cable Termination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76 to 2-81
Application Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-82 to 2-87
Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-88 to 2-92
Cheminax Coaxial Cables Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-92
Nanonics Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-93 to 2-101
MICRODOT Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-102 to 2-147
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-148 to 2-158
Ruggedized Fiber Optic Connectors
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2 to 3-3
Expanded Beam Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4 to 3-28
Physical Contact & Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-29 to 3-34
Rugged Circular Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-35 to 3-54
Rugged Board Level Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-55
Navy CID Approved - Epoxy Applied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-56, 3-57
LightCrimp Plus Navy Approved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-58 to 3-60
Offshore Optical Connectors and Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . .3-61
Rack and Panel Connectors
ARINC 600 Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2 to 4-44
ARINC 404 Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-45 to 4-70
HexaShield High-Performance EMC/EMI Adapters . . . . . . . . . . . . . . . . . . . . .4-71 to 4-76
Nanominiature and Microminiature Connectors
Nanominiature Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-4 to 5-5
DUALOBE Rectangular Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6 to 5-43
Strip Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-44 to 5-50
Microminiature Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-51
Microminiature D Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-52 to 5-82
Rectangular Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-83 to 5-100
High Speed I/O’s
CeeLok FAS-T Connectors, Cable Assemblies, and Associated Products . . . . .6-2 to 6-8
CeeLok FAS-T Nano Circular Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-9 to 6-12
Quadrax Contacts, Connectors and Cables . . . . . . . . . . . . . . . . . . . . . . . . . .6-13 to 6-36
ii
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Connectors for Aerospace, Defense and Marine
Table of Contents (Continued)
Circular Connectors
Circular HD Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2 to 7-18
NANONICS Environmentally Sealed Circular Connectors . . . . . . . . . . . . . . . . .7-19 to 7-40
Rectangular Pin and Socket Connectors
General Purpose Rectangular (GPR) Connectors . . . . . . . . . . . . . . . . . . . . . . .8-3 to 8-34
AMPLIMITE Subminiature Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-35 to 8-103
High Density Rectangular Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-104 to 8-116
MTC High-Performance Modular Rectangular Connectors
with Removable Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-117 to 8-140
“G” Series Modular Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-141 to 8-158
Terminal Junction System (MIL-T-81714 and Commercial) . . . . . . . . . . . . .8-159 to 8-179
LGH High Voltage Connectors
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-2 to 9-4
LGH Lead Assemblies and Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-4 to 9-26
Commercial Single Line Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-27 to 9-30
Two-Position Connectors, 10 KVDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-31 to 9-33
Multi-Pin Circular Commercial Connectors, 27 KVDC . . . . . . . . . . . . . . . . . . . .9-34, 9-35
Multi-Line High Voltage Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-36
5-Pin, Metal-Shell Circular Connectors, Military-Type . . . . . . . . . . . . . . . . . . . . .9-37, 9-38
7-Pin, Metal-Shell Circular Connectors, Military-Type . . . . . . . . . . . . . . . . . . . . .9-39, 9-40
6-Pin, Subminiature Rectangular Connectors . . . . . . . . . . . . . . . . . . . . . . . . .9-41 to 9-45
LGH Micro-Miniature Connectors and Cable Assemblies . . . . . . . . . . . . . . . .9-46 to 9-48
Medical Receptacles (Used Primarily for Patient Monitoring) . . . . . . . . . . . . . . .9-49, 9-50
Various Specials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-51 to 9-62
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-63
LGH Product Worksheet for Ordering Custom Designs . . . . . . . . . . . . . . . . . . . . . . . .9-64
Terminals and Splices
How to Compute Circular Mil Area of Various Wire Shapes . . . . . . . . . . . . . . . . . . . . 10-2
Terminal Stud Hole Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3
AMP Crimp Style
SOLISTRAND Uninsulated Terminals and Splices . . . . . . . . . . . . . . . . . . .10-4 to 10-7
STRATO-THERM Terminals and Splices for High Temperature Applications . .10-8 to 10-22
COPALUM Sealed Terminals and Splices . . . . . . . . . . . . . . . . . . . . . . . .10-23 to 10-28
PIDG (Pre-Insulated DIAMOND GRIP) Terminals and Splices . . . . . . . .10-29 to 10-37
Radiation Resistant/302°F [150°C] Pre-Insulated Terminals and Splices . .10-38 to 10-40
TERMINYL Insulated Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-41 to 10-42
Data Bus (MIL-STD-1553B) Components
Discrete Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-2, 11-3
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-4 to 11-8
Triaxial Size 8 Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-9
Supporting Information
Equivalents and Conversions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-2, 12-3
Temperature Conversion Formula . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-4, 12-5
Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-1 to 13-10
Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-1 to 14-17
iii
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Connectors for Aerospace, Defense and Marine
Engineering Notes
iv
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Printed Circuit Board Connectors
Table of Contents
High Speed Board Level Connectors
1
MULTIGIG RT 2-R Ruggedized Connectors for VPX Applications . . . . . . . . . . .1-3 to 1-6
Fortis Zd Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-7, 1-8
Printed Circuit Board Connectors
Mezalok Connector (High Reliability Mezzanine Connector) . . . . . . . . . . . . . . . .1-9, 1-10
AMP MIL-Spec PCB Connectors
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-11
Mini-Box .050 [1.27] Centerline Connectors
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-12
Mini-Box and Extended Mini-Box Assemblies . . . . . . . . . . . . . . . . . . . . . . . . .1-13 to 1-23
Microminiature COAXICON Contacts for Hybrid Cavities . . . . . . . . . . . . . . . . . . . . . .1-24
Recommended Printed Circuit Board Layouts . . . . . . . . . . . . . . . . . . . . . . . . .1-25 to1-27
Keying Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-27
4-Row Mini-Box Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-28, 1-29
AMP-HDI .075 [1.91] Staggered Centerline LRM Connectors
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-30
AMP-HDI 6-Row and 8-Row Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-31 to 1-35
AMP-HDI Accessories and Shell Accessories . . . . . . . . . . . . . . . . . . . . . . . . . .1-36, 1-37
Box .075 [1.91] Centerline Connectors
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-38
Assemblies, Receptacle and Pin Header . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-39 to 1-42
Stacking Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-43
Recommended Printed Circuit Board Layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-44
Box .100 [2.54] Centerline Connectors
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-45
Assemblies, Receptacle and Pin Header . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-46 to 1-55
Pin Housing and Assemblies for Crimp Contacts . . . . . . . . . . . . . . . . . . . . . . . .1-56, 1-57
Receptacle Housing and Assemblies for Crimp Contacts . . . . . . . . . . . . . . . .1-58 to 1-60
Assemblies, 3-Row and 4-Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-61 to 1-65
Assemblies with Hybrid Cavities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-66 to 1-69
Microminiature COAXICON Contacts for Hybrid Cavities . . . . . . . . . . . . . . . . . . . . . .1-70
Recommended Printed Circuit Board Layouts . . . . . . . . . . . . . . . . . . . . . . . . .1-71 to 1-76
Keying Hardware and Replacement Contacts for
.075 [1.91] and .100 [.254] Centerlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-77, 1-78
Box II Connectors
Vertical Receptacles with ACTION PIN Posts and Solder Post Contacts . . . . . . . . . .1-79
Horizontal Motherboard Stacking (Not Recommended for MFBL Applications) . . . . . .1-80
Assemblies, 4-Row, 3-Row, and 2-Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-81 to 1-84
Recommended Printed Circuit Board Hole Layouts . . . . . . . . . . . . . . . . . . . . . .1-85, 1-86
ACTION PIN Press-Fit Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-87
Application Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-88
Hardware and Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-89, 1-90
AMPMODU .100 [2.54] Centerline Connectors per MIL-C-55302
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-91
Receptacle Assemblies, Single Row and Double Row . . . . . . . . . . . . . . . . . .1-92 to 1-97
Special Double Row Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-98
1-1
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Printed Circuit Board Connectors
Table of Contents (Continued)
AMP-BLADE Two-Piece Printed Circuit Edge Connectors
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-99
AMP-BLADE Connector for Snap-In Receptacle Contacts . . . . . . . . . . . . . . . . . . . .1-100
Board Half Housing Pre-loaded with Blade Type Contacts . . . . . . . . . . . . . . .1-101, 1-102
Wire-Half Assemblies and Housings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-103
Receptacle Housings for Crimp Snap-In Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . .1-104
AMP-BLADE Connector Keying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-105
Application Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-106
1-2
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
High Speed Board Level Products
MULTIGIG RT 2-R Ruggedized Connectors for VPX Applications
Product Facts
Quad-redundant contact
system supports high levels
of shock/vibration
■
Compliant to VITA 46 for
Open VPX applications
■
Supports Ethernet, Fibre
Channel, InfiniBand
applications, PCIe and
Serial RapidIO high speed
protocols
■
Modular, lightweight
connector system
■
Robust “pinless” interface
■
Differential, single-ended
and power
■
Ruggedized guide hardware
available
■
Supports 0.8 inch card slot
pitches
■
VITA 46 compliance enables
upgrade in existing VPX
applications
■
Can be combined with high
power modules (VITA 62),
RF modules (VITA 67) and
Optical modules (VITA 66)
1
Printed Circuit Board Connectors
■
Description
Materials
TE’s MULTIGIG RT 2-R
ruggedized, light weight,
high speed board-to-boardinterconnect is compliant to
VITA 46 standard. This
connector system features
a quad-redundant contact
structure designed for high
vibration levels.
Contacts: High performance copper alloy, plated
50 µin Au over 50 µin Ni in
mating area, tin-lead on
compliant pin tails
Applications
Rugged embedded
computing applications:
- Ground Defense
- Missile Defense
- Electronic Systems /
C4ISR
- Space
- Commercial and Military
Aerospace
Housings: High temperature
thermoplastic
Rugged Guide Hardware:
Aluminum and passivated
stainless steel
Mechanical
Operating Temperature:
-55 to +105˚C
Mating Force: 0.75 N [2.70
ozf] maximum per contact
Standards & Specifications
Compliant to VITA 46 (VPX)
Physical or other
Properties
Tested to HALT (Highly
accelerated life test)
vibration levels (0.2G2/Hz)
per VITA 72
Connector modules
available for 3U and 6U
VPX slot profiles, including
rear transition modules
Reliable press-fit termination,
requiring only flat rock
tooling
Lightest weight VPX
connector system: mated
set of connectors and
guide hardware for typical
module and backplane
slots: 3U - 62.66g (2.21 oz);
6U - 140.26g (4.95 oz)
Product Specification:
108-2072
Application Specification:
114-13056
Qualification Test Report:
501-544
1-3
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
High Speed Board Level Products
MULTIGIG RT 2-R Ruggedized Connectors for VPX Applications (Continued)
Part Configurations
P6
P5
J6
Daughtercard
Module Position
PO
Differential
P1, P2, P3,
P4, P5, P6 Single-Ended
Keying Guide Modules
J3
J4
J5
P2
P3
P4
P1
J2
P0
J1
J0
Part No.
Ruggedized
MULTIGIG RT 2
MULTIGIG RT 2-R
Connectors
(Extended Pad Wafers)
2102772-1
1410189-3
2102771-1
1410187-3
2102847-1
1410190-3
2000713-X
1-1469492-X
Machined 6061
Standard (Zinc Die
Aluminum Guide Socket, Cast) Guide Socket
w/ESD Contact
See TE drawings for guide module and pin options.
Backplane
Module Position
JO
J1, J3, J4, J5
J2, J6
Keying Guide Pin
Part No.
Ruggedized
MULTIGIG RT 2
MULTIGIG RT 2-R
Connectors
(Quad Redundant
Contacts)
2102735-1
1410186-1
2102736-1
1410140-1
2102737-1
1410142-1
2000676-X
Stainless Steel
Guide Pin
1-1469491-X
Standard (Zinc Die
Cast) Guide Pin
See TE drawings for guide module and pin options.
1-4
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
High Speed Board Level Products
MULTIGIG RT 2-R Ruggedized Connectors for VPX Applications (Continued)
Part Configurations
Daughtercard
1
P1
P2
Printed Circuit Board Connectors
P3
P4
P5
P6
P0
Backplane
RJ6
RJ5
RP6
RP5
RJ4
RP4
RJ3
RP3
RJ2
RP2
RJ1
RP1
RJ0
RP0
Rear Transition Module
Rear Transition Module
Part No.
Ruggedized MULTIGIG RT 2-R
Module Position
MULTIGIG RT 2
RPO
RP1
RP2
RP3, RP4,
RP5, RP6
Differential
Differential & Single-Ended
Differential
Single-Ended
Differential
Single-Ended
Keying Guide Modules
(Extended Pad Wafers)
2102773-1
2102774-1
2102849-1
2102775-1
2102848-1
2102774-1
2102847-1
Connectors
1410968-3
1410975-3
1410970-3
1410971-3
1410972-3
1410975-3
1410190-3
2000713-X
Machined 6061 Aluminum
Guide Socket, w/ESD Contact
1-1469492-X
Standard (Zinc Die Cast)
Guide Socket
See TE drawings for guide module and pin options.
Rear Transition Backplane
Module Position
RJO
RJ1
See
See
See
See
Note
Note
Note
Note
1
2
3
4
RJ2
RJ3
RJ4, RJ5, RJ6
Keying Guide Pin
Part No.
Ruggedized MULTIGIG RT 2-R
(Quad Redundant Contacts)
2102768-1
2102850-1
2102736-1
2102851-1
2102735-1
2102737-1
2102736-1
2226127-1
Stainless Steel Guide Pin
MULTIGIG RT 2
Connectors
1410964-1
1410965-1
1410140-1
1410966-1
1410186-1
1410142-1
1410140-1
1410956-1
Standard (Zinc Die Cast)
Guide Pin
Notes (Reference VITA 46.10; Observation 3-6):
Note 1: 16 column shell, 15 columns of contacts
Note 2: 16 column shell, 7 columns of contacts present
Note 3: 16 column shell, 16 columns of contacts
Note 4: 16 column shell, 8 columns of contacts present
1-5
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
High Speed Board Level Products
MULTIGIG RT 2-R Ruggedized Connectors for VPX Applications (Continued)
Associated VPX Solutions
MEZALOK Mezzanine Connectors (Compliant to VITA 61)
Utilizes the proven, reliable MIL-55302 Mini-Box contact interface, with four points
of contact
■ Backwards compatible with XMC board footprint
■ Accommodates 10mm, 12mm, 15mm and 18mm stack heights
■ Solder ball SMT attach in SnPb and RoHS options
■ 114 (6 x 19) positions and 60 (6 x 10) positions
■ Protected “stub-proof” socket contacts w/superior signal integrity
■ Exceptional solder joint reliability (1000+ cycles thermal shock)
■
MULTI-BEAM XLE Power Connectors (Compliant to VITA 62)
20A and 50A power contacts, plus signal contacts
3-beam high-conductivity-copper contact design allows for a greater angular
misalignment between mating connectors and offers a lower mating force
■ Slim guide sockets reduce the overall PCB footprint
■ Vented housing allows for better heat dissipation
■ Hot-plug capable
■
■
Optical Modules (Compliant to VITA 66)
Light weight
High bandwidth
■ EMI immunity
■ 3 fiber optic interface types available:
- 66.1 has two MT ribbon ferrules up to 24 fibers each
- 66.2 four ARINC 801 termini
- 66.3 one expanded beam lensed insert with four fibers
■
■
RF Modules (Compliant to VITA 67)
Excellent channel-to-channel isolation and RF performance to 65 GHz
Modular design permits application specific configuration with high RF contact
count
■ Float mounted jack maintains positive RF ground
■ 240 center-to-center spacing
■ 4 and 8 position modules are designed to meet the requirements of VITA 67.1 and
VITA 67.2
■
■
1-6
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
High Speed Board Level Products
Fortis Zd Connector
Product Facts
Allows 10+ Gb/s data rates
■
Extreme mechanical and
electrical performance
for the most demanding
applications
■
Modular design allows for
user configurability and
modular evolution
■
M55302 heritage Mini-Box
separable interface provides
4 points of contact
■
Three options for application versatility, including
standard, shielded and
rugged metal shell
■
3-Pair and 2-Pair versions
available to accommodate
multiple slot pitches
■
Space compatible materials
■
Proven compliant pin
board attach facilitates
manufacturing efficiency,
repairability, and superior
electrical performance
■
■
Staggered daughtercard
pin field supports 2 level
maintenance
Protected pin field on
backplane for reliability
and durability
1
Printed Circuit Board Connectors
■
Description
Product Dimensions
Modular backplane connector
system combining the highest
performance mil/aero and
commercial technologies in
a user configurable platform.
2000896-1 (3-pair, Vertical Center Module)
Built to be the most robust
and highest performance
backplane connector.
Technical Documents
Product Specifications:
108-2409
Qualification Test Report:
501-752
Application Specification:
114-13267
-1 (3-pair, Right-Angle Center Module)
1-7
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
High Speed Board Level Products
Fortis Zd Connector (Continued)
Mechanical
Physical or Other
Properties
Durability: 500 mating cycles
Materials
10 and 20 column modules
Operating Temperature:
-55 to +125˚C
3-pair (9-row) and 2-pair
(6-row) modules
Contact Engaging &
Separating Force: 4.0 oz. max
6U configuration offers 300
differential pairs
Multi-bay shielded and
rugged shell options
3-Bay Shielded
6 row module enables
0.6” reduced form factor
card pitch
Modularity enables scalability
for various card sizes
Contacts: High performance copper alloy
Plated 50µin Au over 50µin
Ni in mated contact area
Tin/lead or tin (RoHS) on
compliant tails
Housings: High temperature
thermoplastic
Shell:
Shield: Copper alloy
Rugged shell: 6061
Aluminum with trivalent
chromate conversion
coating
3-Bay Metal Shell
Ordering Information
1
Size
Description
2-pair
3-pair
2
3-pair
Differential
Differential
Single-Ended
10-col.
left
2102086
2000890
2102314
Right Angle Connector Modules
10-col.
20-col.
10-col. 10-col. full 20-col. full
center
center
right
shroud
shroud
2102087
2102096
2102088
2102081
2102232
2000891
2000903
2000892
2102155
2102159
2102315
2102316
2102317
2102318
2102319
Shielded Right Angle Connector Modules
Size Description 10-col.
20-col.
30-col.
40-col.
50-col.
60-col.
3-pair Differential 2102247-1 2102247-2 2102247-3 2102247-4 2102247-5 2102247-6
2
3-pair Single-Ended 2102320-1 2102320-3 2102320-4 2102320-4 2102320-5 2102320-6
Rugged Shell for Right Angle Connector Modules
Size Description 10-col.
20-col.
30-col.
40-col.
50-col.
60-col.
2-pair Differential 2102114-1 2102114-2 2102114-3 2102114-4 2102114-5 2102114-6
3-pair Differential 2102077-1 2102077-2 2102077-3 2102077-4 2102077-5 2102077-6
1. -1 SnPb Tails, -2 Sn Tails
2. Single-Ended 3-pair uses the same vertical connector as differential 3-pair
Differential Insertion Loss
1
10-col.
end
2102092
2000895
Vertical Connector Modules
10-col.
20-col. 10-col. full 20-col. full
center
center
shroud
shroud
2102093
2102098
2102094
2102234
2000896
2000905
2102157
2102161
Shielded Vertical Connector Modules
10-col.
20-col.
30-col.
40-col.
50-col.
60-col.
2102248-1 2102248-2 2102248-3 2102248-4 2102248-5 2102248-6
Guide Pin
Guide Module
VITA 46
Die Cast
1469491
1469492
VITA 46
Machined
2000676
2000677 or 2000713
See drawings for dash number options.
Differential Return Loss
1-8
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
High Speed Board Level Products
Mezalok Connector (High Reliability Mezzanine Connector)
Product Facts
Allows 10Gb/s and data rates
■
60, 114, and 320 positions
■
Mini-Box contact system
provides 4 points of contact
for ultra reliability
■
LCP plastic housings offer
superior thermal stability
and are low-outgassing
■
Compliant BGA board attach
supports standard surface
mount processing and
excellent thermal stability
■
114 position footprint compatible to XMC footprint and
all dimensional constraints,
VITA 61 compliant
■
Stack heights from 10 mm
to 18 mm
Technical Documents
Product Specifications:
108-2411
1
Printed Circuit Board Connectors
■
Description
Mechanical
Standards & Specs
Rugged surface mount
mezzanine connector incorporating “super-redundant”
Mini-Box contact system for
separable interface.
500 mating cycles durability
114 position conforms to
requirement of VITA 61
(VITA 42 Alternate)
Qualification Test Report:
Designed for 10 mm through
18 mm stack heights.
501-735
Applications
Application Specification:
114-13279
Stacking or mezzanine
applications
114 position is designed
to support VITA 61 XMC
architecture as rugged
alternative to VITA 42 XMC
60 and 320 position
designed for custom architecture stacking applications
Mating force: 0.30 lb. max.
times number of contacts
-65˚C to +125˚C operating
temperature
Shock and vibration per
VITA 47 requirements
Materials
Pin Assembly: LCP plastic
housings, white in color
VITA 42 and VITA 61 are not
intermateable, but are footprint and XMCarchitecture
compatible
Application Tooling
Product is installed via
standard BGA surface
mount processes.
Socket Assembly: LCP
plastic housings, white in
color
Contacts: High Performance
Copper Alloy, 50µ” Au in
mating interface (Sn/Pb and
SAC305 solder balls are
available)
1-9
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
High Speed Board Level Products
Mezalok Connector (High Reliability Mezzanine Connector) (Continued)
No. of
Pos.
Interface
Mated Stack
Height (mm)
pin
10
Mini-box contact
60
socket
12
18
pin
10
114
12
socket
15
18
pin
320
10
socket
18
Pin — 2102060
Part No.
2102079-1
2102079-2
2102079-3
2102079-4
2102080-1
2102080-2
2102080-5
2102080-6
2102080-3
2102080-4
2102080-7
2102080-8
2102080-9
1-2102080-0
1-2102080-1
1-2102080-2
2102060-1
2102060-2
2102060-3
2102060-4
2102061-1
2102061-2
2102061-5
2102061-6
2102061-3
2102061-4
2102061-7
2102061-8
1-2102061-3
1-2102061-4
1-2102061-5
1-2102061-6
2102061-9
1-2102061-0
1-2102061-1
1-2102061-2
2102429-1
2102429-2
2102429-3
2102429-4
2102430-1
2102430-2
2102430-5
2102430-6
2102430-9
1-2102430-0
1-2102430-1
1-2102430-2
Contact
Plating
1.27
1.27
0.76
0.76
1.27
1.27
0.76
0.76
1.27
1.27
0.76
0.76
1.27
1.27
0.76
0.76
1.27
1.27
0.76
0.76
1.27
1.27
0.76
0.76
1.27
1.27
0.76
0.76
1.27
1.27
0.76
0.76
1.27
1.27
0.76
0.76
1.27
1.27
0.76
0.76
1.27
1.27
0.76
0.76
1.27
1.27
0.76
0.76
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
um
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
gold
BGA Solder
tin-lead
lead free
tin-lead
lead free
tin-lead
lead free
tin-lead
lead free
tin-lead
lead free
tin-lead
lead free
tin-lead
lead free
tin-lead
lead free
tin-lead
lead free
lead free
lead free
tin-lead
lead free
tin-lead
lead free
tin-lead
lead free
tin-lead
lead free
tin-lead
lead free
tin-lead
lead free
tin-lead
lead free
tin-lead
lead free
tin-lead
lead free
tin-lead
lead free
tin-lead
lead free
tin-lead
lead free
tin-lead
lead free
tin-lead
lead free
Socket — 2102061
1-10
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
AMP MIL-Spec PCB Connectors
Introduction
Mini-Box .050 [1.27]
Centerline Connectors
Standard receptacles are
thru-hole flow solder, surface mount, press fit tail and
straddle mount. Standard
pin headers are available in
a choice of surface mount,
straddle mount or rightangle configurations.
Extended receptacles are
vertical thru-hole and pin
headers are available in
straddle mount or rightangle thru-hole versions.
In addition, Mini-Box 2-row
connectors are available
with 4 or 6 hybrid cavities
which accept micro-miniature coax contacts or a
choice of high voltage pin
and socket contacts.
TE Connectivity Mini-Box
connectors are also available in 4-row connector
configurations. Vertical
mount receptacle assemblies and pin headers with
flexible circuit tails.
.075 [1.91] & .100 [2.54]
Centerline Box Contact
Connectors
This family includes .050
[1.27] stacking connectors
and 6 & 8 Row LRM
(Line Replaceable Module)
Connectors
Designed specifically to be
the next generation, high
density electronic packaging system, the AMP-HDI 6
Row, .075 [1.91] centerlines
and 8 Row, .080 [2.03] centerlines, LRM Interconnection
System meets applicable
DSCC 89065 LRM specifications. This advanced
system features high temperature plastic housings
compatible with IR reflow
solder techniques. Added
advantage of the AMP-HDI
LRM System is its capability
of accepting MIL SPEC
fiber optic contacts per
MIL-T29504/5. Six-row configurations available in 306
contact positions. Eight-row
configurations feature two
214 position plug halves
which mate with one
428-position receptacle.
This technological leader is
offered with standard tinlead plated solder tails and
for those applications where
maintaining a light weight
system is a factor. The
8-row configuration is made
available with weight saving,
flexible film tails.
Box Contact Connectors with
contacts on .075 [1.91] &
.100 [2.54] centerline
spacing are available in 2,
3 and 4-row configurations
with pin counts up to 300
contact positions. Box
contact connectors use this
unique, reliable four-beam
design which offers low
applied cost while maintaining high reliability and
performance.
Commercial military versions
are available for both pin
headers and receptacles.
Box II vertical receptacles
with ACTION PIN Posts
and Solder Post Contacts
are also available. When
mated with AMP-HDI pin
assemblies, these permit
horizontal stacking of
motherboards. 2, 3, and
4-row connector versions
are available.
.100 [2.54] Centerline
Connectors
AMPMODU Board-Mount
Receptacle Assemblies are
qualified to MIL-C-55302,
and provide a compact and
versatile means of interconnecting today’s complex
electronic modules. Rightangle receptacle connectors
mate with .0252 [0.642]
posts, have dual cantilever
spring contact design and
built-in anti-overstress, duplex gold-over-nickel plating,
and wide misalignment tolerances. Contacts are on .100
[2.54] centerlines, and are
available in single or double
row, blue diallyl phthalate
housings. Assemblies will
accommodate pcb .062
[1.57] or .093 [2.36] thick.
1
Printed Circuit Board Connectors
Mini-Box Contact Connectors,
per MIL-C-55302 are available in 2-row configurations
with pin counts from 20 to
200 positions and uses the
reliable 4-beam box contact
and 4-row configurations up
to 320 positions. The tighter
centerline spacing, .050 x
.150 [1.27 x 3.81] in 2-row,
.050 x .100 [1.27 x 2.54] in
4-row, provides more pins
within a specified distance
and the staggered footprint
allows for easier manufacturing of the pc boards.
AMP-HDI .050 [1.27] and
.075 [1.91] Centerline
Connectors
AMP-BLADE Two-Piece PC
Edge Connectors provide
high levels of conductivity
and reliability to meet the
performance specifications
of MIL-C-21097, and the
design requirements of
MIL-E-5400. Blade and
receptacle contacts, on
.100 [2.54] centerlines
provide multiple areas of
contact for maximum conductivity. Blade contacts
are gold plated in the contact mating area, with tinlead on the solder tails all
over nickel underplate.
PC board housings are
available with or without
mounting hole while
cable-mount connectors
are designed for maximum
versatility, and will accept
a variety of receptacle
contact designs.
Equally important are
Application Costs. The
AMP-HDI LRM interconnection system offers advanced
tooling that simplifies contact
alignment to the pc board,
substantially reducing
overall applied labor costs.
1-11
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Mini-Box .050 [1.27] Centerline Connectors
Introduction
Product Facts
■
Contacts are on .050 x .150
[1.27 x 3.81] centers
■
Four-beam box-type receptacle contact design provides four areas of contact
per connection
■
Quad-beam contact redundancy makes it an excellent
choice in high-vibration
environments
■
2-row standard versions:
2 to 120 contact positions
■
2-row extended versions:
132 to 200 contact positions
■
4-row versions: 120 to 320
contact positions
■
Sealed versions available
■
Pin headers are available
in straddle mount (with or
without pin protectors) and
right-angle versions (with
pin protectors)
■
Solder tails on receptacles
and right-angle pin headers
are staggered for easy access
■
Hybrid connectors with
coaxial and signal contacts
available
■
Qualified to MIL-C-55302/
117, /118, /119
■
2 row and 4 row versions
available
Performance Characteristics
Rated Current — 1.5 amps per contact
Operating Temperature Range —
-85° to 257°F [-65° to 125° C]
Maximum Mating Force —
.3 lb. [.08N] per contact
Durability — 500 cycles of mating
and unmating
Dielectric Withstanding Voltage —
600 VAC at sea level, 150 VAC at
70,000 feet
TE Connectivity Mini-Box
.050 [1.27] centerline
connectors are available in
2-row connector configurations having 20 to 128
contact positions in the
standard version, and 132
to 200 contact positions in
the extended version.
Standard Mini-Box receptacle assemblies are available with a choice of
thru-hole, surface-mount or
straddle mount solder tails.
Standard Mini-Box pin
headers are designed with
surface-mount, straddle
mount, and thru-hole rightangle solder tails.
Extended receptacle
assemblies are verticalmount thru-hole configurations, and pin headers are
in a choice of straddle
mount or thru-hole versions.
A 4-row version for compact
high count connections* is
offered in thru-hole receptacle and straddle mount pin
header configurations.
Mini-Box connectors are also
available in four or six cavity
hybrid configurations with 26
to 74-Mini-Box contacts.
Coaxial Cavities in the hybrid
Mini-Box connectors will also
accept high voltage pin or
socket contacts with operating voltage up to 5KVDC.
External keying is an
added feature of the TE
Mini-Box connector family.
External keys are used with
receptacle assemblies and
pin headers. Keys used in
one end of each mated pair
will yield eight keying
combinations. If used in
both ends sixty-four keying
combinations are possible.
*up to 360 positions
Technical Documents
Product Specifications
108-9046 Connector Mini-Box Contact
108-1663 Connector Mini-Box Contact
with Compliant Printed
Wiring Board Termination
1-12
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Mini-Box .050 [1.27] Centerline Connectors
Mini-Box Receptacle Assemblies for Flow Soldering —
MIL-C-55302 Qualified
1
A
.290
[7.37]
C
Housing Material — In accordance
with MIL-M-24519 per MIL-C-55302.
GLCP-30F, liquid crystal polymer
Contact Material and Finish —
Commercial receptacle — Beryllium
copper per QQ-C-533 or ASTM B768,
or phosphor bronze per ASTM B103
plated .000030 [0.00076] min. gold in
the mating area, .000100 [0.00254] min.
tin-lead in the terminating area over
.000030 [0.00076] min. nickel on the
entire contact; Military receptacle —
Beryllium copper per QQ-C-533 or
ASTM B768, or phosphor bronze per
ASTM B103 plated .000050 [0.00127]
min. gold in the mating area, .000100
[0.00254] min. tin-lead in the terminating area over .000030 [0.00076] min.
nickel on the entire contact
Related Product Data
Mates with — Pin headers,
pages 1-21 to 1-22
External Keying — page 1-30
Recommended PC Board Layout —
page 1-28
Printed Circuit Board Connectors
.050
[1.27]
.150
[3.81]
.150
[3.81]
.255
Max.
[6.48]
B
.107
[2.72]
.220 Max.
[5.59]
Pin No. 1 Identification
.140 ± .015
[3.56 ± 0.38]
.190 ± .015
[4.83 ± 0.38]
.008x.018
Tail
.190 ± .015
[4.83 ± 0.38]
.075
[1.90]
Typ.
530720 and 530745 Series
No. of
Pos.
128
110
100
90
80
70
60
50
40
30
20
A
3.740
95.00
3.290
83.57
3.040
77.22
2.790
70.87
2.540
64.52
2.290
58.17
2.040
51.82
1.790
45.47
1.540
39.12
1.290
32.77
1.040
26.42
Dimensions
B
C
3.450
3.150
87.63
80.01
3.000
2.700
76.2
68.58
2.750
2.450
69.85
62.23
2.500
2.200
63.5
55.88
2.250
1.950
57.15
49.53
2.000
1.700
50.8
43.18
1.750
1.450
44.45
36.83
1.500
1.200
38.1
30.48
1.250
.950
31.75
24.13
1.000
.700
25.4
17.78
.750
.450
19.05
11.43
534175 Series
Assembly Part Nos.
Commercial
Epoxy Sealed*
M55302/
Military Assembly Part Nos.
Unsealed
Sealed
530720-9
534175-1
119-11
1-530745-1
2-530745-2
530720-8
534175-2
119-10
1-530745-0
2-530745-1
530720-7
534175-3
119-09
530745-9
2-530745-0
530720-6
534175-4
119-08
530745-8
1-530745-9
530720-5
534175-5
119-07
530745-7
1-530745-8
530720-4
534175-6
119-06
530745-6
1-530745-7
530720-3
534175-7
119-05
530745-5
1-530745-6
530720-2
534175-8
119-04
530745-4
1-530745-5
530720-1
534175-9
119-03
530745-3
1-530745-4
1-530720-0
1-534175-0
119-02
530745-2
1-530745-3
1-530720-1
1-534175-1
119-01
530745-1
1-530745-2
Note: Contact Align—Part Number 58107-1
*Same contact material and finish per military receptacle
1-13
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Mini-Box .050 [1.27] Centerline Connectors
Mini-Box Receptacle Assemblies for Flow Soldering —
MIL-C-55302 Qualified (Continued)
Vertical, Surface-Mount
A
B
.107
Dia.
[2.72]
.255
Max.
[6.48]
.150
[3.81]
Material and Finish
.150
[3.81]
Housing — In accordance with
MIL-M-24519 per MIL-C-55302.
GLCP-30F, liquid crystal polymer, grey
Contacts — Beryllium copper per
QQ-C-533 or ASTM B768, or phosphor
bronze per ASTM B103 plated .000050
[0.00127] min. gold in themating area,
.000100 [0.00254] min. tin-lead in the
terminating area, over .000030 [0.00076]
min. nickel on the entire contact
.290
[7.37]
C
.300
[7.62]
.195
[4.95]
Related Product Data
Mates with — Pin headers,
pages 1-21 to 1-22
External Keying — page 1-30
Recommended PC Board Layout —
page 1-28
.345–.375
[8.76–9.53]
No. of
Pos.
128
110
100
90
80
70
60
50
40
30
20
A
3.740
95.00
3.290
83.57
3.040
77.22
2.790
70.87
2.540
64.52
2.290
58.17
2.040
51.82
1.790
45.47
1.540
39.12
1.290
32.77
1.040
26.42
Dimensions
B
3.450
87.63
3.000
76.20
2.750
69.85
2.500
63.50
2.250
57.15
2.000
50.80
1.750
44.45
1.500
38.10
1.250
31.75
1.000
25.40
.750
19.05
C
3.150
80.01
2.700
68.58
2.450
62.23
2.200
55.88
1.950
49.53
1.700
43.18
1.450
36.83
1.200
30.48
.950
24.13
.700
17.78
.450
11.43
Assembly
Part No.
1-449599-1
1-449599-0
1-449599-9
1-449599-8
1-449599-7
1-449599-6
1-449599-5
1-449599-4
1-449599-3
1-449599-2
1-449599-1
1-14
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Mini-Box .050 [1.27] Centerline Connectors
Mini-Box Straddle Mount Receptacle Assemblies
A
.290
[7.37]
.150
[3.81]
1
C
Printed Circuit Board Connectors
.050 Ref.
[1.27]
.255 Max.
[6.48]
Housing Material — Liquid crystal
polymer
Contact Material and Finish —
Beryllium copper per QQ-C-533 or
ASTM B768, or phosphor bronze per
ASTM B103 plated .000050 [0.00127]
min. gold in the mating area, .000100
[0.00254] min. tin-lead in the terminating area over .000030 [0.00076] min.
nickel on the entire contact
Related Product Data
Mates with — Pin headers,
pages 1-21 to 1-22
External Keying — page 1-30
Recommended PC Board Layout —
page 1-28
.107 Dia.
[2.72]
.150
[3.81]
Accepts .018 [0.46]
Sq. Pin
B
.220
Max.
[5.59]
.125
[3.18]
Typ.
.250
Typ.
[6.35]
.178
[4.27]
.225 Typ.
[5.72]
.101
[0.96]
Typ.
D
.150 ± .010
[3.81 ± 0.25]
.040
Radius
[1.02]
No. of
Pos.
128
110
100
90
80
70
60
50
40
30
20
A
3.740
95.00
3.290
83.57
3.040
77.22
2.790
70.87
2.540
64.52
2.290
58.17
2.040
51.82
1.790
45.47
1.540
39.12
1.290
32.77
1.040
26.42
.200 ± .015
[5.08 ± 0.39]
.050 Typ.
[1.27]
Dimensions
B
C
3.450
3.150
87.63
80.01
3.000
2.700
76.2
68.58
2.750
2.450
69.85
62.23
2.500
2.200
63.5
55.88
2.250
1.950
57.15
49.53
2.000
1.700
50.8
43.18
1.750
1.450
44.45
36.83
1.500
1.200
38.1
30.48
1.250
.950
31.75
24.13
1.000
.700
25.4
17.78
.750
.450
19.05
11.43
D
3.505
89.03
3.055
77.60
2.805
71.25
2.555
64.90
2.305
58.55
2.055
52.20
1.805
45.85
1.555
39.50
1.305
33.15
1.055
26.80
.805
20.45
Assembly
Part No.
445185-1
445185-2
445185-3
445185-4
445185-5
445185-6
445185-7
445185-8
445185-9
1-445185-0
1-445185-1
1-15
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Mini-Box .050 [1.27] Centerline Connectors
Mini-Box Pin Header Assemblies
Vertical, Surface Mount
A
B
.150
[3.81]
C
.150
[3.81]
.340
[8.64]
Material and Finish
Housing — In accordance with
MIL-M-24519 per MIL-C-55302.
GLCP-30F, liquid crystal polymer, grey
Contacts — Brass per QQ-B-626,
plated .000050 [0.00127] min. gold in
the mating area, .000100 [0.00254] min.
tin-lead in the terminating area, over
.000030 [0.00076] min. nickel on the
entire contact
.350
[8.89]
.050
[1.27]
.170
[4.32]
Related Product Data
Mates with — Receptacle assemblies,
pages 1-18 to 1-20
External Keying — page 1-30
Recommended PC Board Layout —
page 1-28
.200
[5.08]
.300
[7.62]
.018
Square Typ.
[0.46]
.140 ± .015
[3.56 ± 0.38]
.345–.375
[8.76–9.53]
No. of
Pos.
128
110
100
90
80
70
60
50
40
30
20
A
3.850
97.79
3.400
86.36
3.150
80.01
2.900
73.66
2.650
67.31
2.400
60.96
2.150
54.61
1.900
48.26
1.650
41.91
1.400
35.56
1.150
29.21
Dimensions
B
3.450
87.63
3.000
76.20
2.750
69.85
2.500
63.50
2.250
57.15
2.000
50.80
1.750
44.45
1.500
38.10
1.250
31.75
1.000
25.40
.750
19.05
C
3.150
80.01
2.700
68.58
2.450
62.23
2.200
55.88
1.950
49.53
1.700
43.18
1.450
36.83
1.200
30.48
.950
24.13
.700
17.78
.450
11.43
Assembly
Part No.
447441-3
447441-1
447441-4
447441-5
447441-6
447441-2
447441-7
447441-8
447441-9
1-447441-0
1-447441-1
1-16
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Mini-Box .050 [1.27] Centerline Connectors
Mini-Box Pin Header Assemblies (Continued)
Related Product Data
1
Commercial Pin Header
Assemblies
Style I
Printed Circuit Board Connectors
Mates with — Receptacles,
pages 1-21 to 1-22
External Keying — Page 1-30
Recommended PC Board
Layout — Page 1-28
Style III
Style II
.000100 [0.00254] min. tin-lead on the
tail over .000050 [0.00127] min. nickel
on the entire contact
Housing Material — In accordance
with MIL-M-24519 per MIL-C-55302
GLCP-30F, liquid crystal polymer
Contact Material and Finish —
Brass per QQ-B-626 plated .000030
[0.00076] min. gold in the contact area,
A
Dimensions
B
C
3.850
97.79
3.400
86.36
3.150
80.01
2.900
73.66
2.650
67.31
2.400
60.96
2.150
54.61
1.900
48.26
1.650
41.91
1.400
35.56
1.150
29.21
3.600
91.44
3.150
80.01
2.900
73.66
2.650
67.31
2.400
60.96
2.150
54.61
1.900
48.26
1.650
41.91
1.400
35.56
1.150
29.21
.900
22.86
3.150
80.01
2.700
68.58
2.450
62.23
2.200
55.88
1.950
49.53
1.700
43.18
1.450
36.83
1.200
30.48
.950
24.13
.700
17.78
.450
11.43
No. of
Pos.
128
110
100
90
80
70
60
50
40
30
20
Style III
Right-Angle Mount
Part No.
Style I
Straddle Mount
Part No.
Style II
Straddle Mt. w/Pin Protect.
Part No.
530719-9
1-531122-1
530733-9
—
—
530733-8
530719-7
—
530733-7
530719-6
—
530733-6
530719-5
—
530733-5
530719-4
531122-6
530733-4
530719-3
531122-5
530733-3
530719-2
—
530733-2
530719-1
—
530733-1
—
—
1-530733-0
—
—
1-530733-1
Military Pin Header Assemblies — Qualified to MIL-C-55302
Housing Material — In accordance with MIL-C-55302
Contact Material and Finish — Brass per QQ-B-626 plated .000050 [0.00127] min.
gold in the contact area, .000100 [0.00254] min. tin-lead on the tail over .000050
[0.00127] min. nickel on the entire contact.
No. of
Pos.
128
110
100
90
80
70
60
50
40
30
20
A
3.850
97.79
3.400
86.36
3.150
80.01
2.900
73.66
2.650
67.31
2.400
60.96
2.150
54.61
1.900
48.26
1.650
41.91
1.400
35.56
1.150
29.21
Dimensions
B
3.600
91.44
3.150
80.01
2.900
73.66
2.650
67.31
2.400
60.96
2.150
54.61
1.900
48.26
1.650
41.91
1.400
35.56
1.150
29.21
.900
22.86
C
3.150
80.01
2.700
68.58
2.450
62.23
2.200
55.88
1.950
49.53
1.700
43.18
1.450
36.83
1.200
30.48
.950
24.13
.700
17.78
.450
11.43
Style I - Straddle Mount
MIL-C-55302/
Part No.
Style II - Straddle Mt. w/ Pin Protect.
MIL-C-55302/
Part No.
Style III - Right-Angle
MIL-C-55302/
Part No.
118-11
2-530744-2
118-22
2-531803-2
117-11
2-530743-2
118-10
2-530744-1
118-21
2-531803-1
117-10
2-530743-1
118-09
2-530744-0
118-20
2-531803-0
117-09
2-530743-0
118-08
1-530744-9
118-19
1-531803-9
117-08
1-530743-9
118-07
1-530744-8
118-18
1-531803-8
117-07
1-530743-8
118-06
1-530744-7
118-17
1-531803-7
117-06
1-530743-7
118-05
1-530744-6
118-16
1-531803-6
117-05
1-530743-6
118-04
1-530744-5
118-15
1-531803-5
117-04
1-530743-5
118-03
1-530744-4
118-14
1-531803-4
117-03
1-530743-4
118-02
1-530744-3
118-13
1-531803-3
117-02
1-530743-3
118-01
1-530744-2
118-12
1-531803-2
117-01
1-530743-2
1-17
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Mini-Box .050 [1.27] Centerline Connectors
Mini-Box Pin Header Assemblies (Continued)
Style I
Straddle Mount without
Pin Protectors
.054–.070
[1.38–1.78]
PC Board
.150 ± .015
[3.81 ± 1.27]
.100 ± .010
[2.54 ± 0.25]
.150
[3.81]
Style II
Straddle Mount with
Pin Protectors
.054–.070
[1.38–1.78]
PC Board
.150 ± .015
[3.81 ± 1.27]
.100 ± .010
[2.54 ± 0.25]
A
Style III
Right-Angle Mount
.150
Typ.
[3.81]
.075
Typ.
[1.90]
.075 ± .030
[1.91 ± 0.76]
Typ.
± .010
[± 0.25]
.280
[7.11]
.075
[1.90]
.075
Typ.
[1.90]
.225
Typ.
[5.72]
.310
[7.87]
.140 ± .015
Typ.
[3.56 ± 0.38]
C
.125 ± .015
[3.18 ± 0.38]
.103
Typ.
[2.62]
.140
[3.56]
.180 .350
[4.57] [8.89]
Typ.
.170
[4.32]
.018
Typ.
[0.64]
.098
Dia.
[2.49]
2 Plcs.
.250
Typ.
[6.35]
1-18
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
.250
[6.35]
.067
Typ.
[1.70]
B
± .008
[± 0.20]
.225
Typ.
[5.72]
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Mini-Box .050 [1.27] Centerline Connectors
Extended Mini-Box Receptacle Assemblies
1
Printed Circuit Board Connectors
Housing Material — Liquid crystal
polymer
Contact Material and Finish —
Beryllium copper per QQ-C-533 or
ASTM B768, or phosphor bronze per
ASTM B103 plated .000050 [0.00127]
min. gold in the mating area, .000100
[0.00254] min. tin-lead in the terminating area over .000030 [0.00076] min.
nickel on the entire contact
.107
[2.72]
Related Product Data
Mates with — Straddle mount pin
header assembly, page 1-23, and rightangle pin header, page 1-24
External Keying — page 1-30
Recommended PC Board Layout —
page 1-28
.215–.245
[5.46–6.22]
(Outside Rows)
.285–.315
[7.24–8.00]
(Inside Rows)
No. of
Pos.
200
192
180
172
160
152
140
132
A
5.950
151.13
5.750
146.05
5.450
138.43
5.250
133.35
4.950
125.73
4.750
120.65
4.450
113.03
4.250
107.95
B
1.413
35.89
1.362
34.60
1.287
32.69
1.237
31.42
1.162
29.52
1.062
26.98
1.037
26.34
.987
25.07
C
5.200
132.08
5.000
127.00
4.700
119.38
4.500
114.30
4.200
106.68
4.000
101.60
3.700
93.98
3.500
88.90
Dimensions
D
5.650
143.51
5.450
138.43
5.150
130.81
4.950
125.73
4.650
118.11
4.450
113.03
4.150
105.41
3.950
100.33
E
2.825
71.76
2.725
69.22
2.575
65.41
2.475
62.87
2.325
59.06
2.225
56.52
2.075
52.71
1.975
50.17
F
2.450
62.23
2.350
59.69
2.200
55.88
2.100
53.34
1.950
49.53
1.850
46.99
1.700
43.18
1.600
40.64
G
2.300
58.42
2.200
55.88
2.050
52.07
1.950
49.53
1.800
45.72
1.700
43.18
1.550
39.37
1.450
36.83
Assembly
Part No.
534179-8
534179-7
534179-6
534179-5
534179-4
534179-3
534179-2
534179-1
1-19
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Mini-Box .050 [1.27] Centerline Connectors
Extended Mini-Box Pin Header Assemblies
Style I
Housing Material — Liquid crystal
polymer
Contact Material and Finish —
Brass per QQ-B-626 plated .000050
[0.00127] min. gold in the contact area,
.000100 [0.00254] min. tin-lead on the
tails over .000050 [0.00127] min. nickel
on the entire contact
C
A
± .010
[± 0.25]
D
Related Product Data
Mates with — Receptacle, page 1-23
External Keying— page 1-30
Recommended PC Board Layout —
page 1-29
.096–.101
[2.44–2.57]
Slot 3 Plcs.
.054–.070
Ref.
[1.37–1.78]
PC Board
No. of
Pos.
200
192
180
172
160
152
140
132
A
6.050
153.67
5.850
148.6
5.550
140.97
5.350
135.89
5.050
128.27
4.850
123.19
4.550
115.57
4.350
110.49
B
5.890
149.61
5.690
144.53
5.390
136.91
5.190
131.83
4.890
124.21
4.690
119.13
4.390
111.51
4.190
106.43
C
5.190
131.83
4.990
126.75
4.690
119.13
4.490
114.00
4.190
106.43
3.990
101.35
3.690
93.73
3.490
88.65
Dimensions
D
E
5.650
2.825
143.51
71.76
5.450
2.725
138.43
69.22
5.150
2.575
130.81
65.41
4.950
2.475
125.73
62.87
4.650
2.325
118.11
59.06
4.450
2.225
113.03
56.52
4.150
2.075
105.41
52.71
3.950
1.975
100.33
50.17
F
2.450
62.23
2.350
59.69
2.200
55.88
2.100
53.34
1.950
49.53
1.850
46.99
1.700
43.18
1.600
40.64
G
2.290
58.17
2.190
55.63
2.040
51.82
1.940
49.28
1.790
45.47
1.690
42.93
1.540
38.12
1.440
36.58
H
2.900
73.66
2.800
71.12
2.650
67.31
2.550
64.77
2.400
60.96
2.300
58.42
2.150
54.60
2.050
52.07
Assembly
Part No.
534180-8
534180-7
534180-6
534180-5
534180-4
534180-3
534180-2
534180-1
1-20
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Mini-Box .050 [1.27] Centerline Connectors
Extended Mini-Box Right-Angle Pin Header Assemblies
Style II
1
A
Printed Circuit Board Connectors
Housing Material — Liquid crystal
polymer
Contact Material and Finish —
Brass per QQ-B-626 plated .000050
[0.00127] min. gold in the contact area,
.000100 [0.00254] min. tin-lead on the
tail over .000050 [0.00127] min. nickel
on the entire contact
± .010
[± 0.25]
Related Product Data
Mates with — Receptacle assemblies,
page 1-22
External Keying — page 1-30
Recommended PC Board Layout —
page 1-26
.096–.101
[2.44–2.57]
Slot 3 Plcs.
.075 ± .030 .015 ± .030
[1.91 ± 0.76] [0.38 ± 0.76]
.075 ± .030
[1.91 ± 0.76]
.170–.200
[4.32–5.08]
PC Board
No. of
Pos.
200
192
180
172
160
152
140
132
A
6.050
153.67
5.850
148.60
5.550
140.97
5.350
135.89
5.050
128.27
4.850
123.19
4.550
115.57
4.350
110.49
B
5.890
149.61
5.690
144.53
5.390
136.91
5.190
131.83
4.890
124.21
4.690
119.13
4.390
111.51
4.190
106.43
C
5.190
131.83
4.990
126.75
4.690
119.13
4.490
114.00
4.190
106.43
3.990
101.35
3.690
93.73
3.490
88.65
Dimensions
D
2.825
71.76
2.725
69.22
2.575
65.41
2.475
62.87
2.325
59.06
2.225
56.52
2.075
52.71
1.975
50.17
E
2.450
62.23
2.350
59.69
2.200
55.88
2.100
53.34
1.950
49.53
1.850
46.99
1.700
43.18
1.600
40.64
F
2.290
58.17
2.190
55.63
2.040
51.82
1.940
49.28
1.790
45.47
1.690
42.93
1.540
38.12
1.440
36.58
G
2.900
73.66
2.800
71.12
2.650
67.31
2.550
64.77
2.400
60.96
2.300
58.42
2.150
54.60
2.050
52.07
Assembly
Part No.
534688-8
534688-7
534688-1
534688-6
534688-5
534688-4
534688-3
534688-2
1-21
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Mini-Box .050 [1.27] Centerline Connectors
Mini-Box Receptacle Assemblies with 4 or 6 Hybrid Cavities
Housing Material — In accordance
with MIL-C-55302
Contact Material and Finish —
Beryllium copper per QQ-C-533 or
ASTM B768, or phosphor bronze per
ASTM B103 plated .000030 [0.00076]
min. gold in the contact area, .000100
[0.00254] min. tin-lead in the termination area over .000030 [0.00076] min.
nickel on the entire contact
Pin Location #1
.125–.155
[3.18–3.94]
.175–.205
[4.45–5.21]
Related Product Data
Mates with — Pin headers, page 1-26
External Keying — page 1-30
Other sizes and configurations available. Consult
TE Connectivity.
No. of
Box Contact
Pos.
No. of
Coaxial
Cavities
90
4
74
6
36
6
26
6
A
3.740
95.00
3.740
95.00
2.790
70.87
2.540
65.52
Dimensions
B
C
3.450
87.63
3.450
87.63
2.500
63.5
2.250
57.15
2.200
55.88
1.800
45.72
.850
21.59
.600
15.24
D
.200
5.08
.400
10.16
.400
10.16
.400
10.16
Assembly
Part No.
532797-1
531820-1
531820-3
531820-2
Note: These receptacle assemblies accept coaxial contact—Vertical PC Board Mount Socket 227603-1
.109–.113
Dia.
[2.77–2.87]
Recommended
PC Board Layout
1-22
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Mini-Box .050 [1.27] Centerline Connectors
Mini-Box Right-Angle Pin Header Assemblies with 4 or 6 Hybrid Cavities
Pin Location #1
B
Printed Circuit Board Connectors
Housing Material — In accordance
with MIL-C-55302
Contact Material and Finish —
Brass per QQ-B-626 plated .000030
[0.00076] min. gold in the contact area,
.000100 [0.00254] min. tin-lead on the
post over .000030 [0.00076] min. nickel
on the entire contact
1
± .010
[± 0.25]
A
.075 ± .030
[1.91 ± 0.76]
Dia.
±.008
[± 0.20]
Related Product Data
Mates with — Receptacles, page 1-25
External Keying — page 1-30
Other sizes and configurations available. Consult
TE Connectivity.
No. of
Box Contact
Pos.
No. of
Coaxial
Cavities
90
4
74
6
36
6
26
6
Dimensions
B
C
A
3.850
97.79
3.850
97.79
2.900
73.66
2.650
67.31
3.600
91.44
3.600
91.44
2.650
67.31
2.400
60.96
2.200
55.88
1.800
45.72
.850
21.59
.600
15.24
Assembly
Part No.
D
.200
5.08
.400
10.16
.400
10.16
.400
10.16
532796-1
531819-1
531819-3
531819-2
Note: These pin header assemblies accept coaxial contacts—Vertical Cable Pin 227604-1 and Right-Angle PC Board
Mount Pin 227602-1.
B
± .008
[± 0.20]
.109–.113
Dia.
[2.77–2.87]
Edge of PC Board
Recommended
PC Board Layout
1-23
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Mini-Box .050 [1.27] Centerline Connectors
Microminiature COAXICON Contacts for Hybrid Cavities
.546
Max.
[13.87]
.921
Max. (Assembled)
[23.39]
.132 ± .005
[3.35 ± 0.13]
.255
Max.
[6.48]
.145
Max. Dia.
[3.68]
.400
Max.
[10.16]
.280
Max.
[7.11]
Cable Pin
.100 ± .010
[2.54 ± 0.25]
.916
Max. (Assembled)
[23.27]
.032 ± .004
Dia. Typ.
[0.81 ± 0.1]
Right-Angle Pin
for PC Board Application
Part Number 227602-1
Plated .000030 [0.00076] gold
Cable Socket
.145
Max. Dia.
[3.68]
.120 ± .003
Dia.
[3.05 ± 0.08]
.740
Max.
[18.8]
.543
Max.
[13.79]
.025 ± .004
Square Typ.
[0.64 ± 0.1]
.153 ± .010
[3.89 ± 0.25]
Right-Angle Cable Socket
Cable
Size
RG 178/U Double Braid
RG 196/U
Contact
Style
Cable Pin
Cable Socket
Right-Angle
Cable Socket
Extraction Tool Part Number 220216-1
.406 ± .016
[10.31 ± 0.4]
.020 ± .004
Dia.
[0.51 ± 0.1]
.200 ± .010
[5.08 ± 0.25]
Part No.
227604-1
227605-1
227606-1
.188 ± .016
[4.78 ± 0.4]
Application Tool
Part No.
220215-1
Vertical Socket
for PC Board Application
Part Number 227603-1
Notes:
1. Center contacts are plated with .000030
[0.00076] gold.
2. For .125 [3.18] maximum thick pc boards.
Electrical Characteristics
Contact Materials
Nominal Impedance — 50 ohms
Frequency Range — 0-2 GHz
Maximum Operating Voltage (Sea
Level) — 150 VAC RMS
Stainless Steel — QQ-S-766
Gold Plate — MIL-G-45204
Nickel Plate — QQ-N-290
Beryllium Copper — QQ-C-530
PTFE — MIL-P-19468A
Brass — QQ-B-626
Mechanical Characteristics
.188 ± .016
[4.78 ± 0.4]
Operating Temperature Range —
-67°C to +257°F [-55°C to +125°C]
Cable Retention — 15 lb. [66.7N]
min. (RG 178 type double braid)
Ferrule Material
Brass — MIL-C-50, tin plate per MILT-10727
Recommended Strip Length
1-24
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Mini-Box .050 [1.27] Centerline Connectors
Mini-Box Connectors Recommended Printed Circuit Board Layouts
Receptacle Assemblies
Pin Header Assemblies
1
Printed Circuit Board Connectors
.109–.113
Dia.
[2.77–2.87]
*
(Connector Side)
Style I & II
*Holes for solder type receptacle connectors should be .025 to .032 [0.64 to 0.81] dia. Holes for compliant tails should be manufactured as follows: .0320±.0010
[0.813±0.025] drilled hole dia. (no. 67 drill), .0003 [0.008] min. tin-lead plating over .001 to .002 [0.025 to 0.051] thick copper on wall. Finished hole diameter to
be .026 to .030 [0.66 to 0.76] after plating, .025 to .030 [0.64 to 0.76] after reflow.
Straddle Mount
Receptacle Assemblies
Right-Angle
Pin Header Assemblies
.109–.113
Dia.
[2.77–2.87]
.018–.022
[0.46–0.56] Typ.
PC Board Edge
Style III
(Connector Side)
No. of
Pos.
128
110
100
90
80
70
60
50
40
30
20
B
3.450
87.63
3.000
76.2
2.750
69.85
2.500
63.5
2.250
57.15
2.000
50.8
1.750
44.45
1.500
38.1
1.250
31.75
1.000
25.4
.750
19.05
Dimensions
C
3.150
80.01
2.700
68.58
2.450
62.23
2.200
55.88
1.950
49.53
1.700
43.18
1.450
36.83
1.200
30.48
.950
24.13
.700
17.78
.450
11.43
D
3.505
89.03
3.055
77.60
2.805
71.25
2.555
64.90
2.305
58.55
2.055
52.20
1.805
45.85
1.555
39.50
1.305
33.15
1.055
26.80
.805
20.45
No. of
Pos.
128
110
100
90
80
70
60
50
40
30
20
B
3.600
91.44
3.150
80.01
2.900
73.66
2.650
67.31
2.400
60.96
2.150
54.61
1.900
48.26
1.650
41.91
1.400
35.56
1.150
29.21
.900
22.86
Dimensions
C
3.150
80.01
2.700
68.58
2.450
62.23
2.200
55.88
1.950
49.53
1.700
43.18
1.450
36.83
1.200
30.48
.950
24.13
.700
17.78
.450
11.43
D
3.250
82.55
2.800
71.12
2.550
64.77
2.300
58.42
2.050
52.07
1.800
45.72
1.550
39.37
1.300
33.02
1.050
26.67
.800
20.32
.550
13.97
1-25
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Mini-Box .050 [1.27] Centerline Connectors
Mini-Box Connectors Recommended Printed Circuit Board Layouts (Continued)
Vertical Surface Mount
Receptacle and
Pin Header Assemblies
.109–.113
[2.77–2.87]
Typ.
BF
C
.060
[1.52]
Typ.
.140
Min. .150
[3.56]
[3.81]
Typ.
.020–.024
[0.51–0.61]
Typ.
.050
[1.27]
Typ.
Extended Mini-Box Connectors Recommended Printed
Circuit Board Layouts (Connector Side of Board)
Receptacle Assemblies
Pin Header Assemblies
D
.225
[5.71]
.150
[3.81]
2.200
[55.88]
.225
[5.72]
.100
[2.54]
E Typ.
Pin Y
Pin X
Pin 2
.225
[5.72]
Pin Z
.111 ± .002
Typ.
[2.82 ± 0.06]
Pin W
.038
[0.97]
E Typ.
Pin T
.225
[5.71]
Pin 3
Pin U
.225
[5.72]
Pin 1
.375
[9.52]
.150
[3.81]
Pin 1
.075
[1.90] .150
[3.81]
.028
Min.
[0.71]
Pin V
.050
Ref.
[1.27]
Pin U
Pin T
.111 ± .002
Typ.
[2.82 ± 0.06]
.075
[1.90]
Pin V
.025
Min.
[0.64]
Pin X
Pin W
Pin Y
Pin Z
F
F
Right-Angle—PC Layout I
PC Layout I
Pin Y
Pin X
Pin T
Pin 2
Pin Z
Pin U
Pin V
Pin W
Pin 1
Pin 1
Pin X
Pin W
Pin T
Pin U
Pin Y
Pin Z
Pin V
Right-Angle—PC Layout II
PC Layout II
.225
[5.71]
E Typ.
.050
[1.27]
.175 ± .002
[4.45 ± 0.06]
.225
Min.
[5.71]
.050 ± .003
[1.27 ± 0.08]
.020 ± .002
Typ.
[0.50 ± 0.06]
.111 ± .002
[2.82 ± 0.06]
F
.050
[1.27]
Straddle Mount
1-26
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Mini-Box .050 [1.27] Centerline Connectors
Extended Mini-Box Connectors Recommended Printed
Circuit Board Layouts (Connector Side of Board) (Continued)
Receptacles
II
II
I
I
II
II
I
I
No. of
Pos.
200
192
180
172
160
152
140
132
T
50
48
45
43
40
38
35
33
U
51
49
46
44
41
39
36
34
D
5.650
143.51
5.450
138.43
5.150
130.81
4.950
125.73
4.650
118.11
4.450
113.03
4.150
105.41
3.950
100.33
V
100
96
90
86
80
76
70
66
Pin Locations
W
X
101
150
97
144
91
135
87
129
81
120
77
114
71
105
67
99
Dimensions
E
2.825
71.76
2.725
69.22
2.575
65.41
2.475
62.87
2.325
59.06
2.225
56.52
2.075
52.71
1.975
50.17
Y
151
145
136
130
121
115
106
100
PC
Layout
Z
200
192
180
172
160
152
140
132
T
50
48
45
43
40
38
35
33
II
II
I
I
II
II
I
I
U
51
49
46
44
41
39
36
34
Y
151
145
136
130
121
115
106
100
1
Z
200
192
180
172
160
152
140
132
Dimensions
No. of
Pos.
F
2.450
62.23
2.350
59.69
2.200
55.88
2.100
53.34
1.950
49.53
1.850
46.99
1.700
43.18
1.600
40.64
Pin Locations
W
X
101
150
97
144
91
135
87
129
81
120
77
114
71
105
67
99
V
100
96
90
86
80
76
70
66
Printed Circuit Board Connectors
PC
Layout
Pin Headers
F
2.450
62.23
2.350
59.69
2.200
55.88
2.100
53.34
1.950
49.53
1.850
46.99
1.700
43.18
1.600
40.64
200
192
180
172
160
152
140
132
E
2.900
73.66
2.800
71.12
2.650
67.31
2.550
64.77
2.400
60.96
2.300
60.96
2.150
54.61
2.050
52.07
Mini-Box and Extended Mini-Box Connector Keying Hardware
External Keys
These external keys can be
used with all the receptacle
assemblies and with all the
pin header assemblies.
They are press fitted into
position using tool number
91117-2. Keys used in one
end of each mated pair will
yield 8 keying combinations, and when used in
both ends of the mated
Pin Headers
External Key
pairs will yield 64 keying
combinations. The No. 2-56
screws are used to mount
keyed receptacles to a
printed circuit board. See
instruction sheet 408-7894
for details. Rivets can be
used to retain keys in pin
header assemblies. See
instruction sheet 408-9240.
Receptacles
.174
[4.42]
External Key
.174
[4.42]
#2-56 Screw
[6.35] Long
Rivet
1⁄4
.165
[4.19]
.165
[4.19]
.020
[0.51]
.230
[5.84]
.230
[5.84]
.106
[2.70]
External Key Kit Number 530721-4
Kit includes 2 each of the following:
Keys — Part Number 530721-1
Military Part Number M55302/31-06
Rivets — Part Number 534164-2
Material — Passivated Stainless Steel
External Key Kit Number 530721-3
Kit includes 2 each of the following:
Keys — Part Number 530721-1
Military Part Number M55302/31-06
#2-56 Screws, .250 [6.35] Long
Material — Passivated Stainless Steel
1-27
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Mini-Box .050 [1.27] Centerline Connectors
4-Row Mini-Box Connectors
Receptacle Assemblies,
Vertical
D
B
Pin #1
Pin #2
.300
[7.62]
.415
[10.54]
Material and Finish
Housing — In accordance with
MIL-M-24519 per MIL-C-55302.
GLCP-30F, liquid crystal polymer, grey
Contacts — Beryllium copper per
QQ-C-533 or ASTM B760, or phosphor
bronze per ASTM B103 plated .000050
[0.00127] min. gold in the
mating area, .000100 [0.00254] min.
tin-lead in the terminating area, over
.000030 [0.00076] min. nickel on the
entire contact
.150
[3.81]
.100
[2.54]
Typ.
Pin #101
.335
Typ.
[8.51]
C
Pin #102
A
.015
[0.38]
Typ.
.275–.280
[6.99–7.11]
Related Product Data
Mates with — Pin headers, page 1-32
External Keying — page 1-30
.195–.200
[4.95–5.08]
Technical Documents
.215 ± .015
[5.46 ± 0.38]
Product Specifications — 108-1551
.050
[1.27]
Ref.
B
.200
[5.08]
C
.175
[4.45]
.050
[1.27]
.020 ± .002
Dia.
[0.51 ± 0.05]
Typ.
Recommended PC Board Layout (Connector Side)
No. of
Pos.
120
152
200
300
320
A
2.095
53.21
2.495
63.37
3.095
78.61
4.345
110.36
4.595
116.71
Dimensions
B
C
1.850
1.450
46.99
36.83
2.250
1.850
57.15
46.99
2.850
2.450
72.39
62.23
4.100
3.700
104.14
93.98
4.350
3.950
110.49
100.33
D
1.950
49.53
2.350
59.69
2.950
74.93
4.200
106.68
4.450
113.03
Connector
w/ Hardware*
Part No.
—
448445-1
449650-2
448445-4
—
448445-2
449650-1
448445-5
—
448445-3
* Hardware includes 2 each 531721-3 External Key Kit (See page 1-27)
1-28
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Mini-Box .050 [1.27] Centerline Connectors
4-Row Mini-Box Connectors (Continued)
Pin Headers, with Flexible
Circuit Terminations
1
A
.350
[8.89]
.365
[9.27]
.100
[2.54]
Material and Finish
Housing — In accordance with
MIL-M-24519 per MIL-C-55302.
GLCP-30F, liquid crystal polymer, grey
Contacts — Brass per ASTM B36
plated .000050 [0.00127] min. gold in
the mating area, .000100 [0.00254] min.
tin-lead in the terminating area, over
.000030 [0.00076] min. nickel on the
entire contact with flexible circuits,
3.5 oz [99.23 g] beryllium copper per
QQ-C-530 conductors with polymide
dielectric and acrylic adhesive
C
B
.502
[12.75]
Max.
.100 ± .020
[2.54 ± 0.51]
.175
[4.45]
Pin #1
Pin #2
.150 Ref.
.064
[3.81]
[1.63]
Ref.
.100
[2.54]
Pin #101
.040
[1.02]
Ref.
Pin #102
D
.140 ± .015
[3.56 ± 0.38]
Related Product Data
Mates with — Receptacle assemblies,
page 1-31
External Keying — page 1-30
Technical Documents
Product Specifications — 108-1551
.120
[3.05]
Typ.
.175 Min.
[4.45]
.015 ± .002 Typ.
[0.39 ± 0.05]
.175
[4.45]
.025
Typ.
[0.64]
.188
[4.78]
B
Recommended PC Board Layout
No. of
Pos.
120
152
200
300
320
A
2.210
56.13
2.610
63.37
3.210
78.61
4.460
110.36
4.710
116.71
Dimensions
B
C
1.850
1.975
46.99
50.17
2.250
2.375
57.15
46.99
2.850
2.975
72.39
62.23
4.100
4.225
104.14
93.98
4.350
4.475
110.49
100.33
D
1.450
36.83
1.850
59.69
2.450
74.93
3.700
106.68
3.950
113.03
Connector
w/ Hardware*
Part No.
—
448446-1
449619-2
448446-4
—
448446-2
449619-1
448446-5
—
448446-3
* Connector includes 2 each of 449601-1 Hardware Kit. Hardware Kit can also be purchased separately. Hardware Kit
includes: external key, screw, spacers, e-ring and threaded spacer.
1-29
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Printed Circuit Board Connectors
.750
[19.05]
AMP-HDI .075 [1.91] Staggered Centerline LRM Connectors
Introduction
Product Facts
■
Two-piece high density, high
performance connectors for
printed circuit board use
■
Four-beam box-type contact
design provides four areas
of contact per connection
■
Available in 6-Row
306 position and 8-Row
428 position
■
Receptacles designed for
through-hole soldering
■
Pins designed for surface
mount card edge applications
■
Guide posts provide proper
alignment during mating
■
Octagonal shape keys
ensure proper mating
■
Meets DSCC 89065
performance requirements
AMP-HDI 6 and 8 Row LRM
(Line Replaceable Module)
Connectors
Designed specifically to be
the next generation, high
density electronic packaging system, the AMP-HDI 6
Row, .075 [1.91] centerlines
and 8 Row, .080 [2.03] centerlines, LRM Interconnection
System meets all DSCC
89065 LRM specifications.
This advanced system
features high temperature
plastic housings compatible
with IR reflow solder techniques. Added advantage
of the AMP-HDI LRM
Connector System is its
capability of accepting MIL
SPEC fiber optic contacts
per MIL-T29504/5. Six-row
configurations available in
306 contact positions.
Eight-row configurations
feature two 214 position
plug halves which mate
with one 428-position
receptacle. This technological leader is offered with
standard tin-lead plated
solder tails and for those
applications where maintaining a light weight system is a factor. The 8-row
configuration is made available with weight saving,
flexible film tails.
Equally important are
Application Costs. The
AMP-HDI LRM Connector
interconnection system
offers advanced tooling
that simplifies contact
alignment to the pc board,
substantially reducing overall applied labor costs.
Guide posts provide alignment for the connectors
when mating. Shell accessories protect the pin
assemblies from physical
damage. Octagonal shape
keys permit eight rotational
positions assuring only the
proper mating assembly
can be inserted.
The connectors offer 6 row
and 306 positions with 4
fiber optic ports capability
or 8 rows with 428 positions.
Housings are made from
Polyphenylene sulfide with
duplex plated .000050
[.00127] min. gold beryllium
copper contacts. The contact tails are tin-lead coated
for easy soldering.
Technical Features
Available Number of Positions —
306 and 428
Center Spacing — .075 [1.91] and
.080 [2.03]
Housing Material — Polyphenylene
Sulfide per MIL-M-24519
Contact Material — Beryllium copper
Contact Finish — 50 µ in gold per
MIL-G-45204
Contact Dimension — .008 [0.20]
wide
Current Rating — 1 ampere
Termination Resistance (Max.) —
20 milliohms
Connector Mating Force — Less
than 130 pounds
Performance Characteristics
Dielectric Withstanding Voltage —
600 VRMS
Insulation Resistance — 100 VDC,
1000 Megaohms
Connector Mating/Unmating —
Less than 3 oz. per contact
Durability — 500 cycles
Vibration — MIL-STD-1344 per
Method 2005 Condition V
Physical Shock — MIL-STD-1344
per Method 2004 Condition H (15G)
Thermal Shock — MIL-STD-1344
method 1003 cond A
Temperature Humidity —
MIL-STD-1344 method 1002 Type II
Technical Documents
Instruction Sheet 408-4008
1-30
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
AMP-HDI .075 [1.91] Staggered Centerline LRM Connectors
AMP-HDI 6-Row, 306-Position Connector
LRM Receptacle Connectors
with Additional, 4-Position,
Fiber Optic Contact Ports
4.960
[125.98]
4.730
[125.98] Ref.
.400
[10.16]
.025
[0.64] Typ.
Contact 306
.1205
[3.06]
Ref.
.090
[2.29]
2 Plcs.
.093
[2.36]
3 Plcs.
Material and Finish:
Housing — Polyphenylene sulfide,
(PPS) per MIL-M-24519
Contacts — Beryllium copper, duplex
plated .000050 [0.00127] min. gold in
the mating area,.000100 [0.00254] min.
tin-lead in the termination area per
5N60 or 5N63
Sealant — Epoxy, all 306 positions
Insert Key — Stainless steel, passivated
Fiber Optic Seats — Fluorosilicone
rubber compound, blue
Fiber Optic Clip — Beryllium copper
per QQ-C-533
Interfacial Seal — Fluorosilicone
rubber compound, blue
Guide Post and Ground — Stainless
steel, passivated
Shell — Aluminum per ASTM B 221alloy 6061-T6, plated chromate per
MIL-C-5541, Class 3 with Captive
Screws — MS 246903-C7 modified
.092
[2.34]
4 Plcs.
Printed Circuit Board Connectors
.025
[0.64] Typ.
Part Number 445270-1
1
2.480
[62.99]
22
.075
Equal [1.91] Typ.
Spaces
.236
[5.99]
Contact 141
.002
.119 ±± .002
.119
0.05]
[3.01±±0.05
[3.01
.090
[2.29]
2 Plcs.
Contact 1
.127
[3.23]
.180
[4.57]
2 Plcs.
.075
[1.91] Typ.
.038 ± .002
[0.97 ± 0.05]
.090
[2.29]
Ref.
.363
[9.22]
.467
[11.86]
.096 ± .002
[2.44 ± 0.05]
.031
[0.79]
.072
[1.83]
.067
[1.70]
2 Plcs.
.385 ± .010
[9.78 ± 0.25]
4.615
[117.22]
.096 ± .004
[2.44 ± 0.10] 2 Plcs.
.131 ± .002
[3.33 ± 0.05] 2 Plcs.
.372 ± .002 2 Plcs.
[9.45 ± 0.05]
.236
[5.10]
.440
[11.17]
.228 ± .002
[5.79 ± 0.05] 2 Plcs.
.127
[3.23]
5.152
[130.86]
.113
[2.87]
Contact Point
.056 .034
Sealant Height
[1.42] [0.86]
1-31
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
AMP-HDI .075 [1.91] Staggered Centerline LRM Connectors
AMP-HDI 6-Row, 306-Position Connector (Continued)
LRM Receptacle Connectors
with Additional, 4-Position,
Fiber Optic Contact Ports
#0-80 UNC-2B
.135
[3.43]
(Continued)
Part Number 445287-2
Part Number 445287-1
.015
[0.38] Rad.
.0940 .1250
[2.388] [3.175]
.0945
[2.40]
.130
[3.30]
.093
[2.36]
.113 ± .002
[2.87 ± 0.05]
.606 ± .002
[15.39 ± 0.05]
Guide Post
Left Half
Part Number 445525-1
Right Half
Part Number 445274-1
.075
[1.91]
Typ.
.075
[1.91]
Typ.
.205
[5.21]
.205
[5.21]
.025
.075 Typ. [0.64] Typ.
[1.91]
2.130
[54.10]
2.130
[54.10]
Ref.
1.755
[44.58]
1.755
[44.58]
Ref.
.025 Typ.
[0.64]
.025 Typ.
[0.64]
.075 Typ.
[1.91]
.025 Typ.
[0.64]
.430
[10.92]
.430
[10.92]
.059
[1.50]
Ref.
.059
[1.50]
Ref.
Interfacial Sealing Gaskets
1-32
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
AMP-HDI .075 [1.91] Staggered Centerline LRM Connectors
AMP-HDI 6-Row, 306-Position Connector (Continued)
LRM Plug Assembly with
Additional, 4-Position,
Fiber Optic Contacts
1
.097 ± .002
[2.46 ± 0.06]
.025
[0.64]
Typ.
.180
[4.57] 2 Plcs.
Contact 1
.025
[0.64]
Typ.
.435
[11.05]
Material and Finish
Housing — Polyphenylene sulfide
(PPS) per MIL-M-24519
Contacts — Beryllium copper, duplex
.000050 [0.00127] min. gold in the
mating area, .000100 [0.00254] min.
tin-lead in the termination area per
5N60 or 5N63
Fiber Optic Contacts —
Per MIL-T-29504/5 (are customer
supplied)
.096 ± .001
[2.44 ± 0.03]
Contact 306
.180
[4.57]
.105 ± .002
[2.67 ± 0.05]
.188
[4.78]
.365
[4.57]
.096 ± .001
[2.44 ± 0.03]
3.858
[97.99]
Contact 138
Contact 139
4.550
[111.57]
27 Equal Spaces
.075
[1.91] Typ.
Printed Circuit Board Connectors
Part Number 445269-1
.182
[4.62] Ref.
.505
[12.83]
.472
[11.99]
.354
[8.99]
Ref.
.1315 ± .001
[3.34 ± 0.03]
5.223
[132.66]
1-33
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
AMP-HDI .075 [1.91] Staggered Centerline LRM Connectors
AMP-HDI 8-Row, 428-Position Connector
LRM Motherboard
Connector
.136
[3.45]
Part Number 447447-1
.236
[5.99]
.127
[3.23]
.020
[0.51] Typ.
.020
[0.51] Typ.
.180
[4.57]
.093
[2.36]
2.080
[52.83]
12 Plcs.
.093
[2.36] 2 Plcs.
.617
[15.57]
.191
[4.84]
.090
[2.29]
2 Plcs.
.090
[2.29]
2 Plcs.
Material and Finish
.127
[3.23]
5.152
[130.86]
Housing — Polyphenylene sulfide per
MIL-M-24519
Contacts — Beryllium copper, plated
.000050 [0.00127] min. gold per
MIL-G-45204 in the contact area, over
.000050 [0.00127] min. on the entire
contact per QQ-N-290
.296
[7.52]
Related Product Data
2.000
[50.80]
4 Plcs.
.310
[7.87]
.172
[4.37]
.096 ± .002
[2.44 ± 0.05]
5.152
[130.86]
.443
[11.25]
.100
[2.54]
.105
[2.67]
2 Plcs.
Mates with — Pin headers, page 1-38
Available Hardware —
.216
External Keys, Guide Pins
[5.49]
.259
[6.58]
.150
[3.81]
.590
[14.99]
0.10 ± .050
[2.54 ± 1.27]
.175–.200
[4.45–5.08]
.190
[4.83]
2 Plcs.
4.615
[117.22]
4.960
[125.98]
2.480
[62.99]
2.000
[50.80]
4 Plcs.
.094 ± .001
[2.39 ± 0.03]
5 Plcs.
.1375
[3.493]
.236
[5.99]
2.000
[50.80]
12 Plcs.
.310
[7.87]
Recommended PC Board Layout
.020
[0.51] Typ.
.020
[0.51] Typ.
.020
[0.51] Typ.
1-34
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
.072
[1.83]
.031
[0.79]
AMP-HDI .075 [1.91] Staggered Centerline LRM Connectors
AMP-HDI 8-Row, 428-Position Connector (Continued)
LRM Daughterboard
Connector
1
Part Number 447444
Housing — Polyphenylene sulfide per
MIL-M-24519
Contacts — Beryllium copper, plated
.000050 [0.00127] min. gold per
MIL-G-45204 in the contact area, over
.000050 [0.00127] min. on the entire
contact per QQ-N-290
Related Product Data
Mates with — Receptacle, page 1-37
Available Hardware — Shell
Assembly, Polarizing Keys
.1745
[4.432 ± 0.25]
.207 ± .008
[5.26 ± 0.20]
Typ.
Printed Circuit Board Connectors
Material and Finish
.188
[4.78]
2 Plcs.
± .0010
.0165 ± .0010
[.419 ± .025]
214 Plcs.
5.223
[132.7]
.236
[5.99]
.1315 ± .0010
[3.340 ± 0.25]
.310
[7.87]
.595
[14.86]
Ref.
2.000
[50.80]
4 Plcs.
.020
[0.51]
Typ.
.096 ± .001
[2.44 ± 0.03]
.020 Typ.
[0.51]
.0165 ± .0010
[.419 ± 0.25]
214 Plcs.
2.080
[52.83]
12 Plcs.
.180
[4.57]
Card Gap Dependent on
Customer Requirements
.472
[11.99]
6.25
Ref.
[158.8]
5.65
[143.5]
5.25
[133.4]
.140 ± .002
[3.56 ± 0.05]
Typ.
.011 ± .001
[.28 ± .05]
Typ.
.200
[5.08]
Ref.
.324
[8.23]
.145
2 Plcs.
[3.68]
[.020
Typ.
[0.51]
106 Plcs.
.200
[5.08]
2.120
[53.85]
[.020
Typ.
[0.51]
106 Plcs.
.106 ± .001
[2.69 ± 0.03]
3 Plcs.
.190
[4.83]
.060
4 Plcs.
[1.52]
.310
[7.87]
.124
[3.15]
2.120
[53.85]
.220
[5.59]
2 Plcs.
.115
[2.92]
2 Plcs.
.399
[10.13]
.249
[6.32]
Recommended PC Board Layout
Plug Housing Assembly
B Side
Plug Half (214 Pos.)
A Side
Part Number
447444-4
447444-2
447444-3
447444-1
Note: 8-Row Housing Dim. (Typ.) —
Plug, 5.223 [132.66] L x .585 [14.86] W x .472 [11.99] H.
1-35
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
AMP-HDI .075 [1.91] Staggered Centerline LRM Connectors
AMP-HDI Connector Accessories
External Key for
Part Number 445270 and
Part Number 447447
Material — Passivated stainless steel.
Fasten with 2-56 cap screw x .50" long
not included.
Part Number 445282-1
Threaded Post Guide for
Part Number 445270 and
Part Number 447447
#2–56 UNC
Thread
Ø .093
[2.36]
.100
[2.54]
Ø .125
[3.18]
.094
ØØ
.094
[2.39]
[.096]
Material — Passivated stainless steel.
Fasten with 2-56 nut not included.
.225
[5.72]
.210
[5.33]
45 Chamfer
.015
R.
[0.38]
.093
[2.36]
.156
[3.96] Hex.
.686
[17.42]
Part Number 447448-1
1-36
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
AMP-HDI .075 [1.91] Staggered Centerline LRM Connectors
AMP-HDI Connector Shell Accessories
Protective Shell for Part
Number 447444
1
Printed Circuit Board Connectors
Part Number 447445-2
Side “A” Shell With Captive
Screws
Part Number 447446-2
Side “B” Shell Without
Captive Screws
Material — Aluminum
Finish — Chromate conversion.
Special shell markings available.
Captive Screw
3 Provided
447445–2 Only
.326
[8.28]
5.324
[135.23]
.878
[22.30]
2.520 Typ.
[57.15]
Protective Shell for
Part Number 445269
Part Number 447007-2
Side “A” Shell With Captive
Screws
Part Number 447006-2
Side “B” Shell Without
Captive Screws
Material — Aluminum
Finish — Chromate conversion.
Special shell markings available.
Captive Screw
3 Provided
447007–2 Only
.245
[6.22]
5.324
[135.23]
.878
[22.30]
2.520 Typ.
[57.15]
1-37
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .075 [1.91] Centerline Connectors
Introduction
Product Facts
■
Contacts are on .075 x .125
[1.91 x 3.18] centers
■
Pin headers are provided
with pin protectors
■
Box receptacles contacts
are available in flow solder,
solder eyelet and straddle
mount styles
■
Qualified to MIL-C55302/24, /25, /23, /156
■
Four-beam box-type
receptacle contact design
provides four areas of
contact per connection
The .075 [1.91] centerline
Box Connector series is
available in a 2-row configuration with pin counts from
10 to 180 positions and
uses the reliable four-beam
box contact. The tighter
centerline spacing provides
more pins within a specified
distance and the staggered
footprint allows for easier
manufacturing of the
printed circuit board.
1-38
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .075 [1.91] Centerline Connectors
Receptacle Assemblies for Flow Soldering — MIL-C-55302 Qualified
Type Y
A
1
±.012
[±0.30]
Printed Circuit Board Connectors
Related Product Data
Mates with — Pin Headers,
pages 1-44 and 1-45
External Keying — page 1-80
Recommended PC Board Layout —
page 1-47
Type Z
A
±.012
[±0.30]
Contact Styles
.015
.156 +– .020
0.38
]
[396 +– 0.51
.015
.156 +– .020
0.38
]
[396 +– 0.51
.014 x .019 [0.36 x 0.48]
Channel Contact1
Solder Eyelet Contact
+ .015
(Max. Wire Size, 26 AWG [0.15 mm]) .220 – .020
0.38
]
[5.59 –+ 0.51
.280 ± .020
[5.84 ± 0.51]
.015
.325 +– .020
0.38
]
[8.26 +– 0.51
.010 x .020 [0.25 x 0.51]
Posted Contacts1
Card Extender Contact
(Use with.070/.054 [1.78/1.37] Board)
.315
[8.00]
Ref.
1-39
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .075 [1.91] Centerline Connectors
Receptacle Assemblies for Flow Soldering — MIL-C-55302 Qualified (Continued)
Commercial Receptacle Assemblies
Housing Material—In accordance with MIL-C-55302 or MIL-M-24519 type GLCP-30F
Contact Material and Finish—Beryllium copper per QQ-C-533 or copper nickel silicon per ASTM B422 and ASTM B888
Channel Contact, Posted Contact and Card Extender Contact—Plated .000030 [0.00076] gold in contact area, .000100 [0.00254] tin-lead on the tails over .00030
[0.00076] nickel on the entire contact.
Solder Eyelet Contact—Plated .000030 [0.00076] gold in the contact area, .000100 [0.00254] tin-lead on the tails over .000030 [0.00076] nickel on the entire contact.
No. of
Pos.
Housing
Type
180
Z
160
Z
150
Z
120
Z
100
Y
80
Y
50
Y
40
Y
30
Y
10
Y
A
Dimensions
B
C
7.630
193.8
6.880
174.75
6.505
165.23
5.380
136.65
4.630
117.6
3.880
98.55
2.755
69.98
2.380
60.45
2.005
50.93
1.255
31.88
7.340
186.44
6.590
167.39
6.215
157.86
5.090
129.29
4.340
110.24
3.590
91.19
2.465
62.61
2.090
53.09
1.715
43.56
.965
24.51
6.675
169.55
5.925
150.5
5.550
140.97
4.425
112.4
3.675
93.35
2.925
74.3
1.800
45.72
1.425
36.2
1.050
26.67
.300
7.62
.014 x .019
[0.36 x 0.48]
Channel Contacts
AMP Part No.
Solder
Eyelet
Contacts
AMP Part No.
.010 x .020
[0.25 x 0.51]
Posted Contacts
AMP Part No.
Card
Extender
Contacts
AMP Part No.
531815-4
531817-4
531811-4
531813-4
531813-3
—
—
531817-3
531813-2
—
—
531817-2
—
531811-1
531815-1
531817-1
—
1-531810-0
—
1-531816-0
531812-8
531810-8
—
—
531812-5
531810-5
—
531816-5
531812-4
531810-4
—
531816-4
531812-3
—
—
531816-3
—
—
531814-1
—
Military Receptacle Assemblies
Housing Material—In accordance with MIL-C-55302 or MIL-M-24519 type GLCP-30F
Contact Material and Finish—Beryllium copper per QQ-C-533
Channel Contact, Posted Contact and Card Extender Contact—Plated .000050 [0.00127] gold in the contact area, .000100 [0.00254] tin-lead on the tails over .000030
[0.00076] nickel on the entire contact.
Solder Eyelet Contact—Plated .000050 [0.00127] gold in the contact area, .000100 [0.00254] tin-lead on the tails over .000050 [0.00127] nickel on the entire contact.
No. of
Pos.
Housing
Type
180
Z
160
Z
150
Z
120
Z
110
Y
100
Y
90
Y
80
Y
70
Y
60
Y
50
Y
40
Y
30
Y
20
Y
10
Y
A
Dimensions
B
C
7.630
193.8
6.880
174.75
6.505
165.23
5.380
136.65
5.005
127.13
4.630
117.6
4.255
108.08
3.880
98.55
3.505
89.03
3.130
79.5
2.755
69.98
2.380
60.45
2.005
50.93
1.630
41.4
1.255
31.88
7.340
186.44
6.590
167.39
6.215
157.86
5.090
129.92
4.715
119.76
4.340
110.24
3.965
100.71
3.590
91.19
3.215
81.66
2.840
72.14
2.465
62.61
2.090
53.09
1.715
43.56
1.340
34.04
.965
24.51
6.675
169.55
5.925
150.5
5.550
140.97
4.425
112.4
4.050
102.87
3.675
93.35
3.300
83.82
2.925
74.3
2.550
64.77
2.175
55.25
1.800
45.72
1.425
36.2
1.050
26.67
.675
17.15
.300
7.62
.014 x .019 [0.36 x 0.48]
Channel Contacts
MIL-Part No.
AMP
M55302/
Part No.
Solder Eyelet Contacts
MIL-Part No.
AMP
M55302/
Part No.
.010 x .020 [0.25 x 0.51] Card Extender Contacts
Posted Contacts
MIL-Part No.
AMP
MIL-Part No.
AMP
M55302/
Part No.
M55302/
Part No.
25-29
531145-4
25-30
531146-4
25-31
531147-4
25-32
531148-4
25-25
531145-3
25-26
531146-3
25-27
531147-3
25-28
531148-3
25-21
531145-2
25-22
531146-2
25-23
531147-2
25-24
531148-2
25-17
531145-1
25-18
531146-1
25-19
531147-1
25-20
531148-1
24-85
1-531142-1
24-86
1-531129-1
24-87
1-531143-1
24-88
1-531144-1
24-81
1-531142-0
24-82
1-531129-0
24-83
1-531143-0
24-84
1-531144-0
24-77
531142-9
24-78
1-531129-2
24-79
531143-9
24-80
531144-9
24-73
531142-8
24-74
531129-9
24-75
531143-8
24-76
531144-8
24-69
531142-7
24-70
531129-8
24-71
531143-7
24-72
531144-7
24-65
531142-6
24-66
531129-7
24-67
531143-6
24-68
531144-6
24-61
531142-5
24-62
531129-6
24-63
531143-5
24-64
531144-5
24-57
531142-4
24-58
531129-5
24-59
531143-4
24-60
531144-4
24-53
531142-3
24-54
531129-4
24-55
531143-3
24-56
531144-3
24-49
531142-2
24-50
531129-3
24-51
531143-2
24-52
531144-2
24-45
531142-1
24-46
531129-2
24-47
531143-1
24-48
531144-1
1-40
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .075 [1.91] Centerline Connectors
Straddle Mount Pin Header Assemblies with Anodized Pin Protectors —
MIL-C-55302 Qualified
A
1
±.012
[±0.30]
Printed Circuit Board Connectors
Min.
Related Product Data
Mates with — Receptacles,
pages 1-42 and 1-43
External Keying — page 1-80
Recommended PC Board Layout —
page 1-47
Commercial Pin
Header Assemblies
Housing Material — In accordance
with MIL-C-55302 or MIL-M-24519
Type GLCP-30F
Pin Protector Material — Anodized
aluminum per QQ-A-250/1
Contact Material and Finish —
Brass per QQ-B-626 plated .000030
[0.00076] gold in the contact area,
.000100 [0.00254] tin-lead on the tabs
over .000050 [0.00127] nickel on the
entire contact.
.054–.070
[1.37–1.76]
PC Board
.280 .020
[5.84 0.51]
Military Pin
Header Assemblies
Housing Material—In accordance
with MIL-C-55302 or MIL-M-24519
Type GLCP-30F
Pin Protector Material—Anodized
aluminum per QQ-A-250/1
Contact Material and Finish—
Brass per QQ-B-626 plated .000050
[0.000127] gold in the contact area,
.000100 [0.00254] tin-lead on the tabs
over .000050 [0.00127] nickel on the
entire contact.
Tabs
Pre-Tinned
.470
[11.94]
.247
[6.27]
.270 .051
[6.86 0.20]
No. of
Pos.
180
160
150
120
110
100
90
80
70
60
50
40
30
20
10
A
7.630
193.8
6.880
174.75
6.505
165.23
5.380
136.65
5.005
127.13
4.630
117.6
4.255
108.08
3.880
98.55
3.505
89.03
3.130
79.5
2.755
69.98
2.380
60.45
2.005
50.93
1.630
41.4
1.255
31.88
Dimensions
B
7.340
186.44
6.590
167.39
6.215
157.86
5.090
129.29
4.715
119.76
4.340
110.24
3.965
100.71
3.590
91.19
3.215
81.66
2.840
72.14
2.465
62.61
2.090
53.09
1.715
43.56
1.340
34.04
.965
24.51
.310 .025
[7.87 0.64]
C
6.675
169.55
5.925
150.5
5.550
140.97
4.425
112.4
4.050
102.87
3.675
93.35
3.300
83.82
2.925
74.3
2.550
64.77
2.175
55.25
1.800
45.72
1.425
36.2
1.050
26.67
.675
17.15
.300
7.62
Military Pin Header
M55302/
AMP Part No.
23-30
530785-4
23-29
530785-5
23-28
530785-2
23-27
530785-6
23-26
530785-7
23-25
530785-8
23-24
1-530785-7
23-23
530785-9
23-22
1-530785-0
23-21
1-530785-1
23-20
1-530785-2
23-19
1-530785-3
23-18
1-530785-4
23-17
1-530785-5
23-16
1-530785-6
1-41
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .075 [1.91] Centerline Connectors
Right-Angle Pin Header Assemblies for Flow Soldering —
MIL-C-55302 Qualified
.770 ± .010
[19.56 ± 0.51]
Related Product Data
Mates with — Receptacles,
pages 1-42 and 1-43
External Keying—page 1-80
Recommended PC Board Layout —
page 1-47
.125 ± .015
[3.18 ± 0.38]
A
±.012
[±0.30]
Commercial Pin
Header Assemblies
Housing Material — In accordance
with MIL-C-55302
Contact Material and Finish —
Brass per QQ-B-626 plated .000030
[0.00076] gold in the contact area,
.000100 [0.00254] tin-lead on the tails
over .000050 [0.00127] nickel on the
entire contact
Military Pin
Header Assemblies
Ref.
Ref.
Housing Material — In accordance
with MIL-C-55302
Contact Material and Finish —
Brass per QQ-B-626 plated .000050
[0.00127] gold in the contact area,
.000100 [0.00254] tin-lead on the tails
over .000050 [0.00127] nickel on the
entire contact
No. of
Positions
180
160
150
120
110
100
90
80
70
60
50
40
30
20
10
Ref.
Ref.
Ref.
In-Line Tails — Type I
(2-row circuit board layout)
A
Dimensions
B
C
7.630
193.8
6.880
174.75
6.505
165.23
5.380
136.65
5.005
127.13
4.630
117.6
4.255
108.08
3.880
98.55
3.505
89.03
3.130
79.5
2.755
69.98
2.380
60.45
2.005
50.93
1.630
41.4
1.255
31.88
7.340
186.44
6.590
167.39
6.215
157.86
5.090
129.29
4.715
119.76
4.340
110.24
3.965
100.71
3.590
91.19
3.215
81.66
2.840
72.14
2.465
62.61
2.090
53.09
1.715
43.56
1.340
34.04
.965
24.51
6.675
169.55
5.925
150.5
5.550
140.97
4.425
112.4
4.050
102.87
3.675
93.35
3.300
83.82
2.925
74.3
2.550
64.77
2.175
55.25
1.800
45.72
1.425
36.2
1.050
26.67
.675
17.15
.300
7.62
Ref.
Staggered Tails — Type II
(4-row circuit board layout)
Commercial
Part No.
In-line, Type I
MIL-Part No.
M55302/
AMP
MIL Part No.
Commercial
Part No.
Staggered, Type II
MIL-Part No.
AMP
M55302/
MIL Part No.
—
156-15
1-531719-5
1-531124-5
156-30
1-531720-5
1-531127-4
156-14
1-531719-4
—
156-29
1-531720-4
—
156-13
1-531719-3
1-531124-3
156-28
1-531720-3
—
156-12
1-531719-2
—
156-27
1-531720-2
—
156-11
1-531719-1
—
156-26
1-531720-1
—
156-10
1-531719-0
—
156-25
1-531720-0
—
156-09
531719-9
—
156-24
531720-9
—
156-08
531719-8
—
156-23
531720-8
—
156-07
531719-7
—
156-22
531720-7
—
156-06
531719-6
531124-6
156-21
531720-6
—
156-05
531719-5
531124-5
156-20
531720-5
—
156-04
531719-4
531124-4
156-19
531720-4
—
156-03
531719-3
531124-3
156-18
531720-3
—
156-02
531719-2
—
156-17
531720-2
—
156-01
531719-1
—
156-16
531720-1
1-42
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .075 [1.91] Centerline Connectors
Stacking Connectors
Receptacle Assembly
6.30
[6.15
]
6.48
6.35
[
Printed Circuit Board Connectors
Housing Material — Blue Diallyl
Phthalate or MIL-M-24519
Type GLCP-30F
Contact Material and Finish —
Beryllium copper or copper nickel silicon per ASTM B422 and ASTM B888,
plated gold .000050 [0.00127] thick all
over nickel .000030 [0.00076] thick
1
[2.57
2.44 ]
.015
.515 –+ .020
0.38
]
[13.08 –+ 0.51
]
Related Product Data
Mates with — Pin Shroud Housing
External Keying — page 1-80
[2.87
2.79 ]
Recommended PC Board Layout
Pin Shroud Housing
[6.81
6.66 ]
[2.57
2.44 ]
.375 ± .010
[9.53 ± 0.25]
Housing Material — Blue Polyester
[6.35
6.22 ]
Related Product Data
Mates with — Receptacle Assembly
15.19
[ 14.53 ]
1-43
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .075 [1.91] Centerline Connectors
Recommended Printed Circuit Board Layouts
Receptacle Assemblies
[
2.87
2.77
.035
Dia. (Min.)
[0.89]
]
2.87
[2.77
]
.014 x .019 [0.36 x 0.48]
Channel Contacts
In-Line, Right-Angle
[2.87
2.77 ]
[2.87
2.77 ]
.010 x .020 [0.25 x 0.51]
Posted Contacts
Staggered, Right-Angle
(Connector Side)
No. of
Pos.
180
160
0.81
0.71
[
]
150
120
110
Card Extender Contacts
100
90
Pin Header Assemblies
80
70
[2.87
2.77 ]
60
5.38
5.28
[
]
50
40
30
[0.81
0.71 ]
20
10
Straddle Mount Assembly
Dimensions
B
7.340
186.44
6.590
167.39
6.215
157.86
5.090
129.29
4.715
119.76
4.340
110.24
3.965
100.71
3.590
91.19
3.215
81.66
2.840
72.14
2.465
62.61
2.090
53.09
1.715
43.56
1.340
34.04
.965
24.51
C
6.675
169.55
5.925
150.5
5.550
140.97
4.425
112.4
4.050
102.87
3.675
93.35
3.300
83.82
2.925
74.3
2.550
64.77
2.175
55.25
1.800
45.72
1.425
36.2
1.050
26.67
.675
17.15
.300
7.62
Note: These drawings are for reference only. Consult TE Connectivity for
board layout details.
1-44
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
Introduction
Product Facts
Contacts are on .100 x .100
[2.54 x 2.54] centers
■
Four-beam box-type contact
design provides four areas
of contact per connection
■
Quad-beam redundancy
offers high performance and
reliability
■
Sealed versions available
■
Straddle mount pin headers
have pretinned tabs for connection to daughter boards
■
Pin headers are provided
with pin protectors
■
Straddle mount pin headers
have replaceable contacts
■
Box receptacle contacts
are available in flow solder,
solder eyelet, straddle
mount, wrap-type and
crimp styles
■
Pin header assemblies
are available in right-angle,
straddle mount and crimp
styles
■
Solder tails are tin-lead
plated for solderability
■
Signal-coax mix connectors
available
■
Qualified to MIL-C-55302/26,
/27, /110, /113, /129, /130
1
Printed Circuit Board Connectors
■
The .100 [2.54] Box Contact
Connector series is available
in 2, 3 and 4-row configurations with pin counts up to
300 positions. Each configuration uses the unique,
very reliable four-beam
box design which offers low
applied cost while maintaining high performance and
reliability. The ability to
choose different sizes;
housing materials; terminations; sealed versions;
hybrids; etc. provides one
with needed versatility in
designing a system.
1-45
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
2-Row Receptacle Assemblies — MIL-C-55302 Qualified
A
.100
[2.54]
±.012
[±0.30]
Related Product Data
Mates with — Pin Headers and
Assemblies, pages 1-56 to 1-60
External Keying — page 1-80
Recommended PC Board Layout —
page 1-74
Contact Styles
.015
.156 +– .020
0.38
]
[3.96 +– 0.51
.015
.220 +– .020
0.38
]
[5.59 +– 0.51
1
.015
.325 –+ .020
0.38
]
[8.26 –+ 0.51
.280 ± .020
[7.11 ± 0.51]
For flow solder application
1-46
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
2-Row Receptacle Assemblies — MIL-C-55302 Qualified (Continued)
Commercial Receptacle Assemblies
1
No. of
Pos.
140
134
130
120
110
100
90
80
70
60
50
40
30
A
Dimensions
B
C
7.855
199.52
7.555
191.90
7.355
186.82
6.855
174.12
6.355
161.42
5.855
148.72
5.355
136.02
4.855
123.32
4.355
110.62
3.855
97.92
3.355
85.22
2.855
72.52
2.355
59.82
7.565
192.15
7.265
184.53
7.065
179.45
6.565
166.75
6.065
154.05
5.565
141.35
5.065
128.65
4.565
115.95
4.065
103.25
3.565
90.55
3.065
77.85
2.565
65.15
2.065
52.4 5
6.900
175.26
6.600
167.64
6.400
162.56
5.900
149.86
5.400
137.16
4.900
124.46
4.400
111.76
3.900
99.06
3.400
83.36
2.900
73.66
2.400
60.96
1.900
48.26
1.400
35.56
.014 x .019
[0.36 x 0.48]
Channel Contacts
AMP Part No.
.010 x .020
[0.25 x 0.51]
Posted Contacts
AMP Part No.
Solder Eyelet
Contacts
AMP Part No.
Card Extender
Contacts
AMP Part No.
1-531832-3
—*
—*
—*
—*
—*
1-531833-2
—*
—*
—*
—*
—*
—*
—*
—*
—*
531832-9
—*
—*
531835-9
531832-8
—*
—*
—*
—*
—*
—*
—*
—*
531834-6
—*
—*
—*
—*
—*
—*
—*
—*
—*
—*
—*
531835-3
—*
—*
—*
—*
—*
—*
—*
—*
531833-4
Printed Circuit Board Connectors
Housing Material — In accordance with MIL-C-55302
Contact Material and Finish — Beryllium copper or copper nickel silicon per ASTM B422 and ASTM B888
Channel Contact, Posted Contact and Card Extender Contact — Plated .000030 [0.00076] gold in contact area. .000100 [0.00254] tin-lead on the tails over
.000030 [0.00076] nickel on the entire contact.
Solder Eyelet Contact — Plated .000030 [0.00076] gold in contact area, .000100 [0.00254] tin-lead on tails over .000030 [0.00076] nickel on the entire contact.
—*
* Part Numbers available upon request, contact TE Connectivity.
Military Receptacle Assemblies
Housing Material — In accordance with MIL-C-55302
Contact Material and Finish — Beryllium copper or copper nickel silicon per ASTM B422 and ASTM B888
Channel Contact, Posted Contact and Card Extender Contact — Plated .000050 [0.00127] gold in contact area, .000100 [0.00254] tin-lead on the tails over
.000030 [0.00076] nickel on the entire contact.
Solder Eyelet Contact — Plated .000050 [0.00127] gold in contact area, in accordance with MIL-C-55302 .000100 [0.00254] tin-lead on tails over
.000050 [0.00127] nickel on the entire contact.
A
Dimensions
B
C
7.855
199.52
7.555
191.90
7.355
186.82
6.855
174.12
6.355
161.42
5.855
148.72
5.355
136.02
4.855
123.32
4.355
110.62
3.855
97.92
3.355
85.22
2.855
72.52
2.355
59.82
7.565
192.15
7.265
184.53
7.065
179.45
6.565
166.75
6.065
154.05
5.565
141.35
5.065
128.65
4.565
115.95
4.065
103.25
3.565
90.55
3.065
77.85
2.565
65.15
2.065
52.45
6.900
175.26
6.600
167.64
6.400
162.56
5.900
149.86
5.400
137.16
4.900
124.46
4.400
111.76
3.900
99.06
3.400
83.36
2.900
73.66
2.400
60.96
1.900
48.26
1.400
35.56
No. of
Pos.
140
134
130
120
110
100
90
80
70
60
50
40
30
.014 x .019 [0.36 x 0.48]
Channel Contacts
MIL-Part No.
AMP
M55302/
Part No.
Solder Eyelet Contacts
MIL-Part No.
AMP
M55302/
Part No.
.010 x .020 [0.25 x 0.51]
Posted Contacts
MIL-Part No.
AMP
M55302/
Part No.
Card Extender Contacts
MIL-Part No.
AMP
M55302/
Part No.
27-193
2-530340-2
27-197
1-530758-3
27-201
1-530776-3
27-229
1-530782-3
27-192
2-530340-1
27-196
1-530758-2
27-200
1-530776-2
27-228
1-530782-2
27-191
2-530340-0
27-195
1-530758-1
27-199
1-530776-1
27-227
1-530782-1
27-190
1-530340-9
27-194
1-530758-0
27-198
1-530776-0
27-226
1-530782-0
27-99
530340-9
27-108
530758-9
27-117
530776-9
27-180
530782-9
27-98
530340-8
27-107
530758-8
27-116
530776-8
27-179
530782-8
27-97
530340-7
27-106
530758-7
27-115
530776-7
27-178
530782-7
27-96
530340-6
27-105
530758-6
27-114
530776-6
27-177
530782-6
27-95
530340-5
27-104
530758-5
27-113
530776-5
27-176
530782-5
27-94
530340-4
27-103
530758-4
27-112
530776-4
27-175
530782-4
27-93
530340-3
27-102
530758-3
27-111
530776-3
27-174
530782-3
27-92
530340-2
27-101
530758-2
27-110
530776-2
27-173
530782-2
27-91
530340-1
27-100
530758-1
27-109
530776-1
27-172
530782-1
1-47
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
2-Row Receptacle Assemblies for Rack Mounting
with Posted Contacts (Wrap-Type) — MIL-C-55302 Qualified
A
±.012
[±0.30]
Related Product Data
Mates with — Pin Headers
Assemblies, pages 1-56 to 1-60
External Keying — page 1-80
Recommended PC Board Layout —
page 1-74
Ref.
Post
Length
L
L
No. of Terminals per Post
1 High 2 High 3 High
.405
10.29
.565
14.35
.725
18.42
+ .015
– .020
0.38 ]
[ +– 0.51
Post Wrapping Information
Maximum wire size for
wrapping a posted box terminal is 30 AWG [0.05mm2]
(maximum insulated wire
diameter, .019 [0.49mm]).
The following data can be
used to determine bit and
sleeve size:
Maximum Terminal
Diagonal: .034 [0.87]
Minimum Terminal
Diagonal: .031 [0.78]
Maximum Effective
Radius: .067 [1.71]
Recommended Sleeve:
No. 5071001
Recommended Bits:
No. 5112081
No. 5070631
1Available
from Gardner-Denver Co.,
Grand Haven, Michigan.
1-48
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
2-Row Receptacle Assemblies for Rack Mounting
with Posted Contacts (Wrap-Type) — MIL-C-55302 Qualified (Continued)
Commercial Receptacle Assemblies
Dimensions
B
C
140
7.855
199.52
7.555
191.50
7.355
186.82
6.855
174.12
6.355
161.42
5.855
148.72
5.355
136.02
4.855
123.32
4.355
110.62
3.855
97.92
3.355
85.22
2.855
72.52
2.355
59.82
7.565
192.15
7.265
184.53
7.065
179.45
6.565
166.75
6.065
154.05
5.565
141.35
5.065
128.65
4.565
115.95
4.065
103.25
3.565
90.55
3.065
77.85
2.565
65.15
2.065
52.45
6.900
175.26
6.600
167.64
6.400
162.56
5.900
149.86
5.400
137.16
4.900
124.46
4.400
111.76
3.900
99.06
3.400
86.36
2.900
73.66
2.400
60.96
1.900
48.26
1.400
35.56
134
130
120
110
100
90
80
70
60
50
40
30
1 High
Part No.1
No. of Terminations Per Post
2 High
3 High
Part No.1
Part No.1
Printed Circuit Board Connectors
A
No. of
Pos.
1
1 Contact Material and Finish — Beryllium copper or copper nickel silicon per
ASTM B422 and ASTM B888 plated .000030 [0.00076] gold in the contact area, .000100
[0.00254] tin-lead on the tails over .000030 [0.00076] nickel on the entire contact
2 Contact Material and Finish — Same as above except for tin on the tails
Housing Material — In accordance with MIL-C-55302 or MIL-M-24519 Type
GLCP-30F
3 High
RoHS Part No.2
—*
—*
—*
—
—*
—*
—*
—
—*
—*
—*
—
—*
—*
—*
—
—*
—*
531838-9
—
—*
531837-8
531838-8
5-531838-8
531836-7
—*
—*
—
—*
—*
531838-6
5-531838-6
—*
—*
—*
—
—*
—*
—*
—
531836-3
—*
531838-3
5-531838-3
—*
—*
—*
—
—*
—*
—*
—
* Part Numbers available upon request, contact TE Connectivity.
Military Receptacle Assemblies
Housing Material — In accordance with MIL-C-55302 or MIL-M-24519 Type GLCP-30F
Contact Material and Finish — Beryllium copper or copper nickel silicon per ASTM B422 and ASTM B888 plated .000050 [0.00127] gold over .000030 [0.00076] nickel
on the entire contact
A
Dimensions
B
C
7.855
199.52
7.555
191.50
7.355
186.82
6.855
174.12
6.355
161.42
5.855
148.72
5.355
136.02
4.855
123.32
4.355
110.62
3.855
97.92
3.355
85.22
2.855
72.52
2.355
59.82
7.565
192.15
7.265
184.53
7.065
179.45
6.565
166.75
6.065
154.05
5.565
141.35
5.065
128.65
4.565
115.95
4.065
103.25
3.565
90.55
3.065
77.85
2.565
65.15
2.065
52.45
6.900
175.26
6.600
167.64
6.400
162.56
5.900
149.86
5.400
137.16
4.900
124.46
4.400
111.76
3.900
99.06
3.400
86.36
2.900
73.66
2.400
60.96
1.900
48.26
1.400
35.56
No. of
Pos.
140
134
130
120
110
100
90
80
70
60
50
40
30
1 High
MIL-Part No.
AMP Part No.
No. of Terminations Per Post
2 High
MIL-Part No.
AMP Part No.
3 High
MIL-Part No.
AMP Part No.
M55302/27-213
—
M55302/27-209
1-530777-3
M55302/27-205
1-530763-3
M55302/27-212
1-530778-2
M55302/27-208
1-530777-2
M55302/27-204
1-530763-2
M55302/27-211
1-530778-1
M55302/27-207
1-530777-1
M55302/27-203
1-530763-1
M55302/27-210
1-530778-0
M55302/27-206
1-530777-0
M55302/27-202
1-530763-0
M55302/27-144
530778-9
M55302/27-135
530777-9
M55302/27-126
530763-9
M55302/27-143
530778-8
M55302/27-134
530777-8
M55302/27-125
530763-8
M55302/27-142
530778-7
M55302/27-133
530777-7
M55302/27-124
530763-7
M55302/27-141
530778-6
M55302/27-132
530777-6
M55302/27-123
530763-6
M55302/27-140
530778-5
M55302/27-131
530777-5
M55302/27-122
530763-5
M55302/27-139
530778-4
M55302/27-130
530777-4
M55302/27-121
530763-4
M55302/27-138
530778-3
M55302/27-129
530777-3
M55302/27-120
530763-3
M55302/27-137
530778-2
M55302/27-128
530777-2
M55302/27-119
530763-2
M55302/27-136
530778-1
M55302/27-127
530777-1
M55302/27-118
530763-1
1-49
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
2-Row Receptacle Assemblies for PC Solder Mount
with Posted Contacts (Wrap-Type) — MIL-C-55302 Qualified
A
±.012
[±0.30]
Related Product Data
Mates with — Pin Header
Assemblies, pages 1-56 to 1-60
External Keying — page 1-80
Post Wrapping Information —
page 1-51
Recommended PC Board Layout —
page 1-74
] Customer's
PC Board
[
Military Receptacle Assemblies
L
Housing Material — In accordance
with MIL-C-55302 or MIL-M-24519
Type GLCP-30F
Contact Material and Finish —
Beryllium copper or copper nickel silicon
per ASTM B422 and ASTM B888 plated
.000050 [0.00127] gold over .000030
[0.00076] nickel on the entire contact.
A
Dimensions
B
C
7.855
199.52
7.555
191.90
7.355
186.82
6.855
174.12
6.355
161.42
5.855
148.72
5.355
136.02
4.855
123.32
4.355
110.62
3.855
97.92
3.355
85.22
2.855
72.52
2.355
59.82
7.565
192.15
7.265
184.53
7.065
179.45
6.565
166.75
6.065
154.05
5.565
141.35
5.065
128.65
4.565
115.95
4.065
103.25
3.565
90.55
3.065
77.85
2.565
65.15
2.065
52.45
6.900
175.26
6.600
167.64
6.400
162.56
5.900
149.86
5.400
137.16
4.900
124.46
4.400
111.76
3.900
99.06
3.400
86.36
2.900
73.66
2.400
60.96
1.900
48.26
1.400
35.56
No. of
Pos.
140
134
130
120
110
100
90
80
70
60
50
40
30
1 High
MIL-Part No.
AMP Part No.
[
+ .015
– .020
+ 0.38
– 0.51
Post Must Be
Soldered To
PC Board
]
No. of Terminations Per Post
2 High
MIL-Part No.
AMP Part No.
3 High
MIL-Part No.
AMP Part No.
M55302/27-225
—
M55302/27-221
1-530780-3
M55302/27-217
1-530779-3
M55302/27-224
—
M55302/27-220
1-530780-2
M55302/27-216
1-530779-2
M55302/27-223
1-530781-1
M55302/27-219
1-530780-1
M55302/27-215
1-530779-1
M55302/27-222
—
M55302/27-218
1-530780-0
M55302/27-214
1-530779-0
M55302/27-171
530781-9
M55302/27-162
530780-9
M55302/27-153
530779-9
M55302/27-170
530781-8
M55302/27-161
530780-8
M55302/27-152
530779-8
M55302/27-169
530781-7
M55302/27-160
530780-7
M55302/27-151
530779-7
M55302/27-168
530781-6
M55302/27-159
530780-6
M55302/27-150
530779-6
M55302/27-167
530781-5
M55302/27-158
530780-5
M55302/27-149
530779-5
M55302/27-157
530780-4
M55302/27-148
530779-4
M55302/27-166
—
M55302/27-165
530781-3
M55302/27-156
530780-3
M55302/27-147
530779-3
M55302/27-164
530781-2
M55302/27-155
530780-2
M55302/27-146
530779-2
M55302/27-163
530781-1
M55302/27-154
530780-1
M55302/27-145
530779-1
1-50
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
2-Row Right-Angle Receptacle Assemblies
with Posted Contacts (Wrap-Type)
A
1
±.012
[±0.30]
Printed Circuit Board Connectors
Related Product Data
Housing Material — In accordance
with MIL-C-55302 or MIL-M-24519
Type GLCP-30F
1 Contact Material and Finish —
Beryllium copper or copper nickel silicon
per ASTM B422 and ASTM B888 plated
.000030 [0.00076] gold in the contact
area, .000100 [0.00254] tin-lead on
posts over .000030 [0.00076] nickel on
the entire contact
2 Contact Material and Finish —
Same as above except for tin on posts
Mates with — Pin Header
Assemblies, pages 1-56 to 1-60
External Keying — page 1-80
Recommended PC Board Layout —
page 1-74
.690 ± .015
[17.53 ± 0.38]
Post Stabilizer
Material: Per MIL-C-55302 or
MIL-M-24519 type GLCP-30F
1The
No. of
Pos.
140
134
130
120
110
100
90
80
70
60
50
40
30
A
7.855
199.52
7.555
191.50
7.355
186.82
6.855
174.12
6.355
161.42
5.855
148.72
5.355
136.02
4.855
123.32
4.355
110.62
3.855
97.92
3.355
85.22
2.855
72.52
2.355
59.82
Dimensions
B
7.565
192.15
7.265
184.53
7.065
179.45
6.565
166.75
6.065
154.05
5.565
141.35
5.065
128.65
4.565
115.95
4.065
103.25
3.565
90.55
3.065
77.85
2.565
65.15
2.065
52.45
C
6.900
175.26
6.600
167.64
6.400
162.56
5.900
149.86
5.400
137.16
4.900
124.46
4.400
111.76
3.900
99.06
3.400
86.36
2.900
73.66
2.400
60.96
1.900
48.26
1.400
35.56
rows of posts will not be of equal length.
Part No.1
RoHS
Part No.2
—
—
—
—
—
—
532469-4
—
1-532469-0
—
532469-9
5-532469-9
532469-3
5-532469-3
—
—
—
—
532469-2
—
—
—
532469-6
—
532469-5
—
1-51
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
2-Row Sealed Receptacle Connector
A
± .012
[± 0.31]
Housing Material — Per
MIL-C-55302 or MIL-M-24519 type
GLCP-30F
Contact Material and Finish —
Beryllium copper or copper nickel silicon
per ASTM B422 and ASTM B888 plated
.000050 [0.00127] gold in the contact
area, .000100 [0.00254] tin-lead on the
solder tails over .000030 [0.00076]
nickel on the entire contact
.015
L –+ .020
0.38
]
[ –+ 0.51
Related Product Data
Mates with — Pin Header
Assemblies, pages 1-56 to 1-60
External Keying — page 1-80
Mating Sealed Pin Header
Assembly — Part Number 532795
Recommended PC Board Layout
No. of
Pos.
140
134
130
120
110
100
90
80
70
60
50
40
30
Dimensions
A
B
C
D
7.855
199.52
7.555
191.90
7.355
186.82
6.855
174.12
6.355
161.42
5.855
148.72
5.355
136.02
4.855
123.32
4.355
110.62
3.855
97.92
3.355
85.22
2.855
72.52
2.355
59.82
7.565
192.15
7.265
184.53
7.065
179.45
6.565
166.75
6.065
154.05
5.565
141.35
5.065
128.65
4.565
115.95
4.065
103.25
3.565
90.55
3.065
77.85
2.565
65.15
2.065
52.45
7.165
181.99
6.865
174.37
6.555
166.50
6.165
156.59
5.655
143.64
5.165
131.19
4.655
118.24
4.165
105.79
3.655
92.84
3.165
80.39
2.655
67.44
2.165
54.99
1.665
42.29
6.900
175.26
6.600
167.64
6.400
162.56
5.906
149.86
5.400
137.16
4.900
124.46
4.400
111.76
3.900
99.06
3.400
86.36
2.900
73.66
2.400
60.96
1.900
48.26
1.400
35.56
Part Nos.
Dim. L
.156 [3.96]
.235 [5.97]
—*
—*
—*
—*
—*
—*
—*
—*
534195-9
534650-9
—*
—*
534195-7
—*
534195-6
—*
534195-5
—*
534195-4
—*
534195-3
—*
534195-2
—*
534195-1
—*
* Part Numbers available upon request, contact TE Connectivity.
1-52
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
2-Row Straddle Mount Pin Header Assemblies with
Anodized Pin Protectors — MIL-C-55302 Qualified
A
1
±.012
[±0.30]
Printed Circuit Board Connectors
.070 Min.
[1.78]
Max.
Commercial Pin
Header Assembly
Housing Material — In accordance
with MIL-C-55302 or MIL-M-24519
type GLCP-30F
Pin Protector Material — Anodized
aluminum per QQ-A-250/1
Contact Material and Finish —
Brass per QQ-B-626 plated .000030
[0.00076] gold in the contact area,
.000100 [0.00254] tin-lead on the tabs
over .000050 [0.00127] nickel on the
entire contact
[
]
PC Board
Military Pin Header Assembly
Housing Material — In accordance
with MIL-C-55302 or MIL-M-24519
type GLCP-30F
Pin Protector Material — Anodized
aluminum per QQ-A-250/1
Contact Material and Finish —
Brass per QQ-B-626 plated .000050
[0.00127] gold in the contact area,
.000100 [0.00254] tin-lead on the tabs
over .000050 [0.00127] nickel on the
entire contact
.270 ± .020
[6.86 ± 0.51]
.310 ± .025
[7.87 ± 0.64]
Related Product Data
Mates with — Receptacles,
pages 1-49 to 1-54, 1-61 and 1-62
External Keying — page 1-80
Recommended PC Board Layout —
page 1-75
No. of
Pos.
140
134
130
120
110
100
90
80
70
60
50
40
30
A
7.855
199.52
7.555
191.50
7.355
186.82
6.855
174.12
6.355
161.42
5.855
148.72
5.355
136.02
4.855
123.32
4.355
110.62
3.855
97.92
3.355
85.22
2.855
72.52
2.355
59.82
Dimensions
B
7.565
192.15
7.265
184.53
7.065
179.45
6.565
166.75
6.065
154.05
5.565
141.35
5.065
128.65
4.565
115.95
4.065
103.25
3.565
90.55
3.065
77.85
2.565
65.15
2.065
52.45
C
6.900
175.26
6.600
167.64
6.400
162.56
5.900
149.86
5.400
137.16
4.900
124.46
4.400
111.76
3.900
99.06
3.400
86.36
2.900
73.66
2.400
60.96
1.900
48.26
1.400
35.56
Commercial
Part No.
Military
MIL Part No.
AMP
Part No.
—
M55302/26-22
1-530761-5
—
M55302/26-21
530761-3
—
M55302/26-20
1-530761-4
—
M55302/26-19
1-530761-3
—
M55302/26-18
530761-5
531842-8
M55302/26-17
530761-6
531842-7
M55302/26-16
530761-7
531842-6
M55302/26-15
530761-4
—
M55302/26-14
530761-8
531842-4
M55302/26-13
530761-9
531842-3
M55302/26-12
1-530761-0
—
M55302/26-11
1-530761-1
—
M55302/26-10
1-530761-2
1-53
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
2-Row Right-Angle Pin Header Assemblies for Flow Soldering —
MIL-C-55302 Qualified
± .012
±.012
A
A [[±0.30]
± 0.30]
.770 ± .010
[19.56 ± 0.25]
Commercial Pin Header
1
Contact Material and Finish —
Brass per QQ-B-626 plated .000030
[0.00076] gold in the contact area,
.000100 [0.00254] tin-lead on the tails
over .000050 [0.00127] nickel on the
entire contact
2 Contact Material and Finish —
Same as above except for tin on the tails
Housing Material — In accordance
with MIL-C-55302 or MIL-M-24519
type GLCP-30F
.135 ± .015
[3.43 ± 0.51]
71
Military Pin Header
Contact Material and Finish — Brass
per QQ-B-626 plated .000050 [0.00127]
gold in the contact area, .000100 [0.00254]
tin-lead on the tails over .000050
[0.00127] nickel on the entire contact
Housing Material — In accordance
with MIL-C-55302 or MIL-M-24519
type GLCP-30F
.100
[2.54] Ref.
.100
[2.54] Ref.
Ref.
Ref.
Related Product Data
Mates with — Receptacles,
pages 1-49 to 1-54, 1-61 and 1-62
External Keying — page 1-80
Recommended PC Board Layout —
page 1-75
No. of
Pos.
140
134
130
120
110
100
90
80
70
60
50
40
30
1-54
1See
A
7.855
199.52
7.555
191.50
7.355
186.82
6.855
174.12
6.355
161.42
5.855
148.72
5.355
136.02
4.855
123.32
4.355
110.62
3.855
97.92
3.355
85.22
2.855
72.52
2.355
59.82
Dimensions
B
C
7.565
192.15
7.265
184.53
7.065
179.45
6.565
166.75
6.065
154.05
5.565
141.35
5.065
128.65
4.565
115.95
4.065
103.25
3.565
90.55
3.065
77.85
2.565
65.15
2.065
52.45
Material and Finish above.
Catalog 1308940
Revised 9-14
www.te.com
PC Board
D
6.900
175.26
6.600
167.64
6.400
162.56
5.900
149.86
5.400
137.16
4.900
124.46
4.400
111.76
3.900
99.06
3.400
86.36
2.900
73.66
2.400
60.96
1.900
48.26
1.400
35.56
2See
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
7.565
192.15
7.265
184.53
7.065
179.45
6.565
166.75
6.065
154.05
5.565
141.35
5.065
128.65
4.565
115.95
4.065
103.25
3.565
90.55
3.065
77.85
2.565
65.15
2.065
52.45
Commercial
Part No.
Standard Housing
MIL Part No.
M55302/
AMP
Part No.
—
110-31
1-531721-3
110-35
1-531722-3
1-530942-21
6-530942-22
110-30
1-531721-2
110-34
1-531722-2
—
110-29
1-531721-1
110-33
1-531722-1
—
110-28
1-531721-0
110-32
1-531722-0
530942-91
110-18
531721-9
110-27
531722-9
530942-81
5-530942-82
110-17
531721-8
110-26
531722-8
530942-71
110-16
531721-7
110-25
531722-7
—
110-15
531721-6
110-24
531722-6
530942-51
5-530942-52
110-14
531721-5
110-23
531722-5
530942-41
5-530942-42
110-13
531721-4
110-22
531722-4
530942-31
110-12
531721-3
110-21
531722-3
530942-21
110-11
531721-2
110-20
531722-2
110-10
531721-1
110-19
531722-1
—
Housing with Interfacial Gasket
MIL Part No.
AMP
M55302/
Part No.
Material and Finish for RoHS Part Numbers above.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
2-Row Right-Angle Pin Header Assemblies with Posted Contacts (Wrap-Type)
A
1
±.012
[±0.30]
Printed Circuit Board Connectors
.770 ± .010
[19.56 ± 0.25]
.650 ± .010
[16.51 ± 0.25]
Related Product Data
Housing Material — In accordance
with MIL-C-55302 or MIL-M-24519
type GLCP-30F
Contact Material and Finish —
Phosphor bronze plated .000050
[0.00127] gold over .000030 [0.00076]
nickel on the entire contact
Mates with — Receptacles,
pages 1-49 to 1-54, 1-61 and 1-62
External Keying — page 1-80
Recommended PC Board Layout —
page 1-75
PC Board
.100 Ref.
[2.54]
Ref.
Post Stabilizer
Material:
Per MIL-C-55302 or
MIL-M-24519 type
GLCP-30F
No. of
Pos.
110
90
80
70
30
A
6.355
161.42
5.355
136.02
4.855
123.32
4.355
110.62
2.355
59.82
.265
[6.73]
Dimensions
B
6.065
154.05
5.065
128.65
4.565
115.95
4.065
103.25
2.065
52.45
C
5.400
137.16
4.400
111.76
3.900
99.06
3.400
86.36
1.400
35.56
AMP
Part No.
532488-9
532488-7
—
—
532488-1
1-55
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
2-Row Pin Housing and Assemblies for Crimp Contacts —
MIL-C-55302 Qualified
Housing Assembly
(includes turnable jackscrews)
A
Housing Material — In accordance
with MIL-C-55302 or MIL-M-24519
type GLCP-30F
Jackscrew Material — Passivated
stainless steel
±.010
[±0.25]
.800 ± .010
[20.32 ± 0.25]
Related Product Data
Mates with — Receptacle assemblies,
pages 1-49 to 1-54, and receptacle
housings, pages 1-61 and 1-62
Crimp Type Pin Contact
Material — Brass
Finish — .000050 [0.00127] gold over
.000050 [0.00127] nickel
Wire Range — 26-22 AWG
[0.12-0.4mm2]
Ins. Dia. Range — .036-.054
[0.91-1.37]
Turnable Jackscrews
Material — Passivated stainless steel
Note: To be used as replacement jackscrew for the pin housing assemblies shown above. They are not compatible
with any other pin header assemblies.
Roll Pin
Roll Pin
Extraction Tool —
Part Number 91156-1
Loose Piece
Military Part Number M55302/113-05
AMP Part Number 530750-5
Female
Military Part No. M55302/113-11
AMP Part No. 530754-2
Strip Form
Military Part Number M55302/113-06
AMP Part Number 530750-4
Male
Military Part No. M55302/113-12
AMP Part No. 530754-1
Fixed Jackscrews
Material — Passivated stainless steel
Tooling
Hand Tool No. 90346-1
is used to apply the loose
piece contacts (Hand tool
instruction sheet 408-7820).
For the application of
strip contacts use the
AMP-O-LECTRIC Machine
with the applicator No.
466625-3. Other automated
machines are available,
consult TE Connectivity for
specifications.
Note: To be used with receptacle assemblies shown on pages 1-49 to 1-54 for mating with pin assemblies shown above.
Male
Military Part No. M55302/113-14
AMP Part No. 531141-3
(Nut supplied by customer)
Female
Military Part No. M55302/113-13
AMP Part No. 531141-4
(Nut supplied by customer)
1-56
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
2-Row Pin Housing and Assemblies for Crimp Contacts —
MIL-C-55302 Qualified (Continued)
Standard Housing
Dimensions
A
B
C
110
6.355 6.065 5.400
161.42 154.05 137.16
113-23
1-530753-8
100
5.855 5.565 4.900
148.72 141.35 124.46
113-22
1-530753-6
90
5.355 5.065 4.400
136.02 128.65 111.76
113-21
1-530753-4
80
4.855 4.565
123.32 115.95
3.900
99.06
113-20
1-530753-2
70
4.355 4.065
110.62 103.25
3.400
86.36
113-19
530753-2
60
3.855
97.92
3.565
90.55
2.900
73.66
113-18
1-530753-0
50
3.355
85.22
3.065
77.85
2.400
60.06
113-17
530753-8
40
2.855
72.52
2.565
65.15
1.900
48.26
113-16
530753-6
30
2.355
59.82
2.065
52.45
1.400
35.56
113-15
530753-4
Turnable Jackscrew
Combinations
Tongue End Groove End
Female
Male
Female
Male
Female
Male
Female
Male
Female
Male
Female
Male
Female
Male
Female
Male
Female
Male
Female
Male
Female
Male
Female
Male
Female
Male
Female
Male
Female
Male
Female
Male
Female
Male
Female
Male
Female
Female
Male
Male
Female
Female
Male
Male
Female
Female
Male
Male
Female
Female
Male
Male
Female
Female
Male
Male
Female
Female
Male
Male
Female
Female
Male
Male
Female
Female
Male
Male
Female
Female
Male
Male
Housing Assembly Part Nos.1
Military
AMP
Part No.
Part No.
M55302/
113-84
3-530752-3
113-85
3-530752-4
113-86
3-530752-5
113-87
3-530752-6
113-76
2-530752-9
113-77
3-530752-0
113-78
3-530752-1
113-79
3-530752-2
113-68
2-530752-5
113-69
2-530752-6
113-70
2-530752-7
113-71
2-530752-8
113-60
2-530752-1
113-61
2-530752-2
113-62
2-530752-3
113-63
2-530752-4
113-07
530752-1
113-08
530752-2
113-09
530752-3
113-10
530752-4
113-52
1-530752-7
113-53
1-530752-8
113-54
1-530752-9
113-55
2-530752-0
113-44
1-530752-3
113-45
1-530752-4
113-46
1-530752-5
113-47
1-530752-6
113-36
530752-9
113-37
1-530752-0
113-38
1-530752-1
113-39
1-530752-2
113-28
530752-5
113-29
530752-6
113-30
530752-7
113-31
530752-8
Kit Part
Military
Part No.
M55302/
113-80
113-81
113-82
113-83
113-72
113-73
113-74
113-75
113-64
113-65
113-66
113-67
113-56
113-57
113-58
113-59
113-01
113-02
113-03
113-04
113-48
113-49
113-50
113-51
113-40
113-41
113-42
113-43
113-32
113-33
113-34
113-35
113-24
113-25
113-26
113-27
Nos.2
Housing Assembly Part Nos.1
Military
AMP
Part No.
Part No.
M55302/
Kit Part
Military
Part No.
M55302/
113-102
113-103
113-104
113-105
113-985
113-995
113-100
113-101
Nos.2
1
AMP
Part No.
Printed Circuit Board Connectors
Housing Part Nos.
Military
AMP
Part No.
No.
M55302/ Part
No. of
Pos.
530755-5
530755-6
530755-7
530755-8
3-530755-3
3-530755-4
3-530755-5
3-530755-6
2-530755-9
3-530755-0
3-530755-1
3-530755-2
2-530755-5
2-530755-6
2-530755-7
2-530755-8
530755-1
530755-2
530755-3
530755-4
2-530755-1
2-530755-2
2-530755-3
2-530755-4
1-530755-7
1-530755-8
1-530755-9
2-530755-0
1-530755-3
1-530755-4
1-530755-5
1-530755-6
530755-9
1-530755-0
1-530755-1
1-530755-2
Housing with Gasket
Housing Part Nos.
Military
AMP
Part No.
M55302/ Part No.
No. of
Pos.
Dimensions
A
B
C
110
6.355 6.065 5.400
161.42 154.05 137.16
113-89
530884-2
70
4.355 4.065
110.62 103.25
113-88
530884-1
3.400
86.36
Turnable Jackscrew
Combinations
Tongue End Groove End
Female
Male
Female
Male
Female
Male
Female
Male
Female
Female
Male
Male
Female
Female
Male
Male
113-94
113-95
113-96
113-97
113-90
113-91
113-92
113-93
530885-5
530885-6
530885-7
530885-8
530885-1
530885-2
530885-3
530885-4
AMP
Part No.
530886-5
530886-6
530886-7
530886-8
530886-1
530886-2
530886-3
530886-4
1Each
2Each
Housing Assembly contains: A. 1 Housing. B. 2 Turnable Jackscrews installed (four combinations available, see table).
Kit contains: A. 1 Housing Assembly with 2 Turnable Jackscrews installed (four combinations are available, see table). B. 2 Fixed Jackscrews to mate
with Turnable Jackscrews (nuts included). These jackscrews are for installation on the mating receptacle housing. C. Loose Piece Contacts. Quantity is number of positions plus 5 extra.
Pin Housing Assembly with
Strain Relief
Material
Strain Relief — Black glass-filled
nylon
Jackscrews — Passivated stainless
steel
Housing — Blue glass-filled polyester
110 Position Housing
and Strain Relief Kits
1.500 ± .010
[38.10 ± 0.25]
.800 ± .010
[20.32 ± 0.25]
Tongue
End
Female
Male
Female
Male
Groove
End
Female
Female
Male
Male
Part No.
533194-1
—
—
533194-4
Other sizes can be made available, consult TE Connectivity.
1-57
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
2-Row Receptacle Housing and Assemblies for Crimp Contacts
Cable
Receptacle Housing
(for Jackscrews)
A
Rack Mount
Receptacle Housing
(for External Keying
for Jackscrews)
±.010
[±0.25]
B
.248
Max.
[6.3]
Tongue
.248
Max.
[6.3]
.370
[9.4]
Cable Receptacle
with Jackscrews
.100
[2.54]
.332
[8.43]
Groove
.370
[9.4]
C
.098
Dia.
[2.49]
.190
[4.83]
Dia.
.252
[6.4]
.252
[6.4]
.400
[10.16]
.550 ± .010
[13.97 ± 0.25]
.550 ± .010
[13.97 ± 0.25]
.402 ± .010
[10.21 ± 0.25]
.120
Dia.
[3.05]
Rack Mount Receptacle
with External Keying
Turnable Jackscrews
Screwdriver Slot
Roll Pin
Material — Passivated stainless steel
Housing Material — In accordance
with MIL-C-55302 or MIL-M-24519
type GLCP-30F
Note: To be used with the cable
receptacle housings shown above.
They are not compatible with other
receptacle assemblies.
#6-32 UNC-2B
Double Thread
Related Product Data
Mates with — Cable Receptacle
Housings mate with Pin Housings
on pages 1-56 to 1-60. Rack Mount
Receptacle Housings mate with Pin
Header Assemblies pages 1-56 to 1-60
External Keying — page 1-80
Screwdriver Slot
Roll Pin
#6-32 UNC-2A
Double Thread
Female
Part Number 530754-4
Male
Part Number 530754-3
Fixed Jackscrews
Material — Passivated stainless steel
#6-32 UNC-2B
Double Thread
Note: For use with rack mount
receptacles shown above.
#6-32 UNC-2A
Double Thread
#2-56 UNC-2A
Thread
Male
Part Number 532484-1
(Includes nut)
#2-56 UNC-2A
Thread
Female
Part Number 532483-2
(Includes nut)
Turnable Jackscrews
Fixed Jackscrews
Material — Passivated stainless steel
Material — Passivated stainless steel
Note: For use with rack mount
receptacles shown above.
Note: For use with external key type Right-Angle pin headers when mating with
rack mount receptacle housings with turnable jackscrews shown to the left.
Roll Pin
Roll Pin
#6-32 UNC-2A
Double Thread
#6-32 UNC-2B
Double Thread
Roll Pin
Roll Pin
#6-32 UNC-2A
Double Thread
#6-32 UNC-2B
Double Thread
Male
Part Number 531993-2
Male
Part Number 531993-1
Male
Part Number 531985-2
Female
Part Number 531985-1
1-58
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
2-Row Receptacle Housing and Assemblies for Crimp Contacts (Continued)
A
Dimensions
B
C
Rack Mount Housing
Part No.
Cable Housing
Part No.
110
6.355
161.42
6.065
154.05
5.400
137.16
1-531802-7
1-531840-7
100
5.855
148.72
5.565
141.35
4.900
124.46
1-531802-5
1-531840-5
80
4.855
123.32
4.565
115.95
3.900
99.06
—
1-531840-1
70
4.355
110.62
4.065
103.25
3.400
86.36
531802-9
531840-9
60
3.855
97.92
3.565
90.55
2.900
73.66
531802-7
531840-7
50
3.355
85.22
3.065
77.85
2.400
60.96
531802-5
531840-5
40
2.855
72.52
2.565
65.15
1.900
48.26
531802-3
531840-3
30
2.355
59.82
2.065
52.45
1.400
35.56
531802-1
531840-1
1Jackscrews
Male
Female
Male
Female
Male
Female
Male
Female
Male
Female
Male
Female
Female
Male
Female
Male
Female
Male
Male
Female
Male
Female
Male
Cable Housing
with Jackscrews
Part No.
—
3-531841-3
—
—
3-531841-0
—
—
2-531841-1
—
—
—
—
—
1-531841-2
—
—
—
—
—
—
531841-4
531841-3
—
Hand
Tool
Applicator for
AMP-O-LECTRIC
Machine
Applicator for
Stripper Crimper
Machine
91540-1
466819-22
466943-1
Jackscrews Combinations1
Tongue End
Groove End
Male
Female
Male
Male
Female
Female
Male
Female
Male
Female
Male
Male
Female
Male
Male
Female
Female
Male
Female
Female
Male
Male
Female
1
Printed Circuit Board Connectors
No. of
Pos.
supplied with assemblies 531841 are 530754-4, female, and 530754-3, male, shown on page 1-61.
Crimp Type Receptacle
Contacts
Material — Phosphor bronze
Finish — Gold over nickel
(See chart for gold thickness)
Wire
Range
Insulation
Range
26-22 AWG
0.15-0.3mm2
.036-.054
0.91-1.37
Loose Piece
[.000030] Gold [.000050] Gold
[0.00076] Gold [0.00127] Gold
531216-2
531216-4
Strip
[.000030] Gold [.000050] Gold
[0.00076] Gold [0.00127] Gold
531216-1
531216-3
2Use Applicator 466819-1 for the AMPOMATOR Machine.
Note: Instruction sheet for Hand Tool 90301-2 is 408-7909.
Extraction Tool Part Number 91156-2
1-59
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
3-Row Receptacle Housings for Crimp Contacts
A
± .010
[± 0.25]
A30
A1
.365
[9.27]
C1
C30
Housing Material — In accordance
with MIL-C-55302 or MIL-M-24519
type GLCP-30F
Related Product Data
Mates with — Pin Headers, page 1-66
External Keying — page 1-80
.550 ± .010
[13.97 ± 0.25]
D
No. of
Pos.
165
150
135
126
120
Crimp Type
Receptacle Contact
105
(Refer to page 1-62 for specifications
and part numbers)
90
A
6.250
158.75
5.750
146.05
5.250
133.35
4.950
125.73
4.750
120.65
4.250
107.95
3.750
95.25
± .010
[± 0.25]
Dimensions
B
C
5.950
5.400
151.13
137.16
5.450
4.900
138.43
124.46
4.950
4.400
125.73
111.76
4.650
4.100
118.11
104.14
4.450
3.900
113.03
99.06
3.950
3.400
100.33
86.36
3.450
2.900
87.63
73.66
D
5.550
140.97
5.050
128.27
4.550
115.57
4.250
107.95
4.050
102.87
3.550
90.17
3.050
77.47
Part No.
1-531984-4
1-531984-3
1-531984-1
531984-8
531984-6
531984-4
531984-1
Turnable Jackscrews
Material — Passivated stainless steel
Note: For use with receptacle housings shown above when mating with Right-Angle pin headers having fixed
jackscrews (531985-1 and 531985-2) shown on page 1-61.
Roll Pin
Roll Pin
Male
AMP Part Number 532021-1
Female
AMP Part Number 532021-2
1-60
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
3-Row Receptacle Assemblies — MIL-C-55302 Qualified
A
±.010
[±0.25]
1
.365
[9.27]
Housing Material — In accordance
with MIL-C-55302 or MIL-M-24519
type GLCP-30F
1 Contact Material and Finish —
Beryllium copper or copper nickel silicon
per ASTM B422 and ASTM B888
Channel Contact and Wrap-Type Posted
Contact — Plated .000030 [0.00076]
gold in the contact area, .000100 [0.00254]
tin-lead on the tails over .000030 [0.00076]
nickel on the entire contact; Solder
Eyelet — Plated .000030 [0.00076]
gold in the contact area, in accordance
with MIL-C-55302 tin-lead on the tails
over .000030 [0.00076] nickel on the
entire contact
2 Contact Material and Finish —
Same as above except for tin on the tails
.675 ± .015
[17.15 ± 0.38]
Military Receptacle
Assemblies
Material: In accordance with
MIL-C-55302 or MIL-M-24519
type GLCP-30F
Wrap-Type Posted Contact
Housing Material — In accordance
with MIL-C-55302 or MIL-M-24519
type GLCP-30F
Contact Material and Finish —
Beryllium copper or copper nickel silicon per ASTM B422 and ASTM B888
Channel Contact — Plated .000050
[0.00127] gold in the contact area,
.000100 [0.00254] tin-lead on the tails
over .000030 [0.00076] nickel on the
entire contact; Wrap-Type Posted
Contact — Plated .000050 [0.00127]
gold over .000030 [0.00076] nickel on
the entire contact; Solder Eyelet —
Plated .000050 [0.00127] gold in the
contact area, in accordance with MIL-C55302 .000100 [0.00254] tin-lead on
the tails over .000050 [0.00127] nickel
on the entire contact
3003
2703
240
210
195
180
165
150
135
1263
120
105
90
1See
A
B
C
10.750
273.05
9.750
247.65
8.750
222.25
7.750
196.85
7.250
184.15
6.750
171.45
6.250
158.75
5.750
146.05
5.250
133.35
4.950
125.73
4.750
120.65
4.250
107.95
3.750
95.25
10.450
265.43
9.450
240.03
8.450
214.63
7.450
189.23
6.950
176.53
6.450
163.83
5.950
151.13
5.450
138.43
4.950
125.73
4.650
118.11
4.450
113.03
3.950
100.33
3.450
87.63
9.900
251.46
8.900
226.06
7.900
200.66
6.900
175.26
6.400
162.56
5.900
149.86
5.400
137.16
4.900
124.46
4.400
111.76
4.100
104.14
3.900
99.06
3.400
86.36
2.900
73.66
Material and Finish above.
Military
M55302/130
Mates with — Pin Headers, page 1-68
External Keying — page 1-80
Recommended PC Board Layout —
page 1-76
Flow Solder
.014 x .019 [0.36 x 0.48]
Channel Contact—Unsealed
.010 x .020 [0.25 x 0.50]
Posted Contact—Sealed
Solder Eyelet Contact
Commercial
Part No.
Related Product Data
.195 ± .015
[4.95 ± 0.38]
.230 ± .015
[5.84 ± 0.38]
Flow Solder Contacts
Dimensions
No. of
Pos.
Printed Circuit Board Connectors
Commercial Receptacle
Assemblies
Solder Eyelet
AMP
Part No.
Sealed
Unsealed
Commercial
Military
Part No. M55302/130
AMP
Part No.
Wrap-Type Posted Contact
AMP
Part No.
Commercial
Military
Part No.
M55302/130
Sealed
Unsealed
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
531138-81
-44
446853-8
531134-8
—
-46
447192-8
—
-45
447193-8
—
531138-71
-41
446853-7
531134-7
—
-43
447192-7
—
-42
447193-7
—
1-531138-31
-38
-40
1-447192-0
—
-39
1-447193-0
—
531138-61
-35
446853-6
531134-6
—
-37
447192-6
-36
447193-6
—
531138-51
-32
446853-5
531134-5
—
-34
447192-5
—
-33
447193-5
—
531138-41
5-531138-42
-29
446853-4
531134-4
—
-31
447192-4
—
-30
447193-4
—
1-531138-21
-26
447192-9
1-531139-21
-27
447193-9
—
—
—
—
—
—
—
—
531138-31
531138-21
5-531138-22
531138-11
5-531138-12
2See
1-446853-0 1-531134-3 1-531140-31
446853-9 1-531134-2
—
—
—
-28
—
—
—
531139-61
—
-23
446853-3
531134-3
—
-25
447192-3
—
-24
447193-3
-20
446853-2
531134-2
—
-22
447192-2
—
-21
447193-2
-17
446853-1
531134-1
—
-19
447192-1
-18
447193-1
Material and Finish for RoHS Part Numbers above.
3Part
531139-11
Numbers available upon request.
1-61
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
3-Row Right-Angle Receptacle Assemblies with Posted Contacts (Wrap-Type)
.100
[2.54]
.495
.365 [12.57]
[9.27] Max.
.100
[2.54]
.275
[6.99]
.098
[2.49] Dia.
.100
[2.54]
C
Housing Material — In accordance
with MIL-C-55302
Contact Material and Finish —
Beryllium copper or copper nickel silicon
per ASTM B422 and ASTM B888 plated
.000050 [0.00127] gold over .000030
[0.00076] nickel on the entire contact
B
±.010
[±0.25]
A A
.252
[6.4]
.450
[11.43]
Related Product Data
Mates with — Pin Headers, page 1-66
External Keying — page 1-80
Recommended PC Board Layout —
page 1-76
.025
[0.64]
.565 ± .020
[14.35 ± 0.51]
.100 ± .020
[2.54 ± 0.51]
Post Stabilizer
Material: MIL-C-55302
or MIL-M-24519
type GLCP-30F
.025 x .025
[0.64 x 0.64] Post
.125
[3.18] Max.
PC Board
.100 ± .020
[2.54 ± 0.51]
.210 ± .015
[6.35 ± 0.38]
.050
.250 +– .040
1.27
]
[8.29 +– 1.02
.450 ± .015
[11.43 ± 0.38]
Right-Angle Wrap-Type Posts
No. of
Pos.
2701
2401
210
195
180
1651
150
1351
1261
1231
120
105
90
1Part
A
9.750
247.65
8.750
222.25
7.750
196.85
7.250
184.15
6.750
171.45
6.250
158.75
5.750
146.05
5.250
133.35
4.950
125.73
4.850
123.19
4.750
120.65
4.250
107.95
3.750
95.25
Dimensions
B
9.450
240.03
8.450
214.63
7.450
189.23
6.950
176.53
6.450
163.83
5.950
151.13
5.450
138.43
4.950
125.73
4.650
118.11
4.550
115.57
4.450
113.03
3.950
100.33
3.450
87.63
C
8.900
226.06
7.900
200.66
6.900
175.26
6.400
162.58
5.900
149.86
5.400
137.16
4.900
124.46
4.400
111.76
4.100
104.14
4.000
101.6
3.900
86.36
3.400
86.36
2.900
73.66
Part No.
—
—
447255-2
447255-3
447255-4
—
447255-6
—
—
—
447255-8
447255-9
1-447255-0
numbers available upon request.
1-62
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
3-Row Right-Angle Pin Header Assemblies — MIL-C-55302 Qualified
1
Printed Circuit Board Connectors
Housing Material — In accordance
with MIL-C-55302 or MIL-M-24519
type GLCP-30F
1 Contact Material and Finish —
Commercial Flow Solder Contact —
Brass per QQ-B-626 plated .000030
[0.00076] gold in the contact area,
.000100 [0.00254] tin-lead on the tails
over .000050 [0.00127] nickel on the
entire contact; Military Flow Solder
Contact — Brass per QQ-B-626 plated
.000050 [0.00127] gold in the contact
area, .000100 [0.00254] tin-lead on the
tails over .000050 [0.00127] nickel on the
entire contact; Wrap-Type Contact —
Phosphor bronze plate .000050
[0.00127] gold over .000030 [0.00076]
nickel on the entire contact
2 Contact Material and Finish —
Same as above except for tin on the tails
A
±.010
[±0.25]
B
.060
[1.52]
.060
[1.52]
Post Stabilizer
Material: Per MIL-C-5530 or
MIL-M-24519 type GLCP-30F
.140 ± .015
[3.56 ± 0.38]
.250
[6.35]
Ref.
Related Product Data
Mates with — 3-Row Receptacles,
pages 1-63 to 1-65
External Keying — page 1-80
Recommended PC Board Layout —
page 1-76
Fixed Jackscrew — page 1-61
Ref.
Ref.
Ref.
Ref.
.240
[6.1]
Flow Solder Contacts
(for use with .096 [2.44] Max.
thick PC board)
1The
Ref.
Wrap-Type Posted Contacts
three rows of posts will not be of equal length.
Flow Solder Contacts
No. of
Pos.
3003
2703
240
210
195
180
165
150
135
126
120
105
90
1See
A
Dimensions
B
C
10.750
273.05
9.750
247.65
8.750
222.25
7.750
196.85
7.250
184.15
6.750
171.45
6.250
158.75
5.750
146.05
5.250
133.35
4.950
125.73
4.750
120.65
4.250
107.95
3.750
95.25
10.450
265.43
9.450
240.03
8.450
214.63
7.450
189.23
6.950
176.53
6.450
163.83
5.950
151.13
5.450
138.43
4.950
125.73
4.650
118.11
4.450
113.03
3.950
100.33
3.450
87.63
9.900
251.46
8.900
226.06
7.900
200.66
6.900
175.26
6.400
162.56
5.900
149.86
5.400
137.16
4.900
124.46
4.400
111.76
4.100
104.14
3.900
99.06
3.400
86.36
2.900
73.66
Material and Finish above.
Commercial
Part No.
Sealed
Unsealed
MIL-Part No.
M55302/129
Wrap-Type Posted Contacts (2 High)
AMP Part No.
Without Stabilizer
With Stabilizer
AMP
Part No.
Sealed
Unsealed
1-447373-11
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
531137-81
-18
446852-81
531133-81
—
—
531137-71
-17
446852-71
531133-71
—
—
—
1-531137-31
-16
1-446852-01
1-531133-31
—
—
—
—
—
—
-15
446852-61
531133-61
—
531137-51
-14
446852-51
531133-51
532775-31
—
—
531137-41
5-531137-42
-13
446852-41
531133-41
1-532775-21
—
—
—
-12
446852-91
1-531133-21
—
—
—
—
—
1-531133-01
1-532775-01
—
532775-81
—
531137-31
—
531137-21
5-531137-22
531137-11
5-531137-12
—
2See
—
-11
446852-31
531133-31
-10
446852-21
531133-21
—
—
-09
446852-11
531133-11
—
447380-51
Material and Finish for RoHS Part Numbers.
3Part
447380-71
Numbers available upon request.
1-63
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
4-Row Receptacle Assemblies
A
±.012
[±0.31]
Housing Material — Polyphenylene
sulfide per MIL-M-24519 or type
GLCP-30F
1 Contact Material and Finish —
Beryllium copper or copper nickel silicon
per ASTM B422 and ASTM B888 plated
gold .000050 [0.00127] thick per
MIL-G-45204 in contact area, tails plated
tin-lead all over nickel per QQ-N-290
2 Contact Material and Finish —
Same as above except for tin on tails
[
]
Related Product Data
Mates with — Pin Header assembly,
page 1-68
External Keying — page 1-80
Recommended PC Board Layout —
page 1-77
No. of
Pos.
300
292
280
268
260
240
232
220
216
200
192
180
168
160
152
140
128
120
100
68
40
A
8.250
209.60
8.050
204.47
7.750
196.85
7.450
189.23
7.250
184.15
6.750
171.45
6.550
166.37
6.250
158.75
6.150
156.21
5.750
146.05
5.550
140.97
5.250
133.35
4.950
125.73
4.750
120.65
4.550
115.57
4.250
107.95
3.950
100.33
3.750
95.25
3.250
82.55
2.450
62.23
1.750
44.45
Dimensions
B
C
7.950
7.524
201.93
191.11
7.750
7.324
196.85
186.03
7.450
7.024
189.23
178.41
7.150
6.724
181.61
170.79
6.950
6.524
176.53
165.71
6.450
6.024
163.83
153.01
6.250
5.824
158.75
147.93
5.950
5.524
151.13
140.31
5.850
5.424
148.59
137.77
5.450
5.024
138.43
127.61
5.250
4.824
133.35
122.53
4.950
4.524
125.73
114.91
4.650
4.224
118.11
107.29
4.450
4.024
113.03
102.21
4.250
3.824
107.95
97.13
3.950
3.524
100.33
89.51
3.650
3.224
92.71
81.89
3.450
3.024
87.63
76.81
2.950
2.524
74.93
64.11
2.150
1.727
54.60
43.87
1.450
1.024
36.83
26.01
D
7.400
187.96
7.200
182.88
6.900
175.26
6.600
167.64
6.400
162.56
5.900
149.86
5.700
144.78
5.400
137.16
5.300
134.62
4.900
124.46
4.700
119.38
4.400
111.76
4.100
104.14
3.900
99.06
3.700
93.98
3.400
86.36
3.100
78.74
2.900
73.66
2.400
60.96
1.600
40.64
.900
22.86
Part No.1
RoHS
Part No.2
—*
—
—*
—
—*
—
—*
—
—*
—
—*
—
—*
—
446081-8
—
—*
—
1-446081-0
6-446081-0
—*
—
—*
—
—*
—
—*
—
—*
—
—*
—
1-446081-7
6-446081-7
—*
—
1-446081-9
—
—*
—
—*
—
* Part Numbers available upon request, contact TE Connectivity.
1-64
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
4-Row Right-Angle Pin Header Assemblies
1
Housing Material — Polyphenylene
sulfide per MIL-M-24519 or type
GLCP-30F
1 Contact Material and Finish —
Phosphor bronze per QQ-B-750, plated
gold .000050 [0.00127] thick per
MIL-G-45204 on mating end for a
length of .120 [3.05] min., tails plated
tin-lead over nickel per QQ-N-290
2 Contact Material and Finish —
Same as above except for tin on tails
Printed Circuit Board Connectors
[
]
[
]
Related Product Data
Mates with — Receptacle assembly,
page 1-67
External Keying — page 1-80
Recommended PC Board Layout —
page 1-77
A
No. of
Pos.
300
292
280
268
260
Ref.
240
232
220
216
200
192
180
168
160
152
140
128
120
100
68
40
A
8.250
209.60
8.050
204.47
7.750
196.85
7.450
189.23
7.250
184.15
6.750
171.45
6.550
166.37
6.250
158.75
6.150
156.21
5.750
146.05
5.550
140.97
5.250
133.35
4.950
125.73
4.750
120.65
4.550
115.57
4.250
107.95
3.950
100.33
3.750
95.25
3.250
82.55
2.450
62.23
1.750
44.45
±.012
[±0.31]
Dimensions
B
C
7.950
7.550
201.93
191.77
7.750
7.350
196.85
186.69
7.450
7.050
189.23
179.07
7.150
6.750
181.61
171.45
6.950
6.550
176.53
166.37
6.450
6.050
163.83
153.67
6.250
5.850
158.75
148.59
5.950
5.550
151.13
140.97
5.850
5.450
148.59
138.43
5.450
5.050
138.43
128.27
5.250
4.850
133.35
123.19
4.950
4.550
125.73
115.57
4.650
4.250
118.11
107.95
4.450
4.050
113.03
102.87
4.250
3.850
107.95
97.79
3.950
3.550
100.33
90.17
3.650
3.250
92.71
82.55
3.450
3.050
87.63
77.47
2.950
2.550
74.93
64.77
2.150
1.750
54.60
44.45
1.450
1.050
36.83
26.67
D
7.400
187.96
7.200
182.88
6.900
175.26
6.600
167.64
6.400
162.56
5.900
149.86
5.700
144.78
5.400
137.16
5.300
134.62
4.900
124.46
4.700
119.38
4.400
111.76
4.100
104.14
3.900
99.06
3.700
93.98
3.400
86.36
3.100
78.74
2.900
73.66
2.400
60.96
1.600
40.64
.900
22.86
Part No.1
RoHS
Part No.2
—*
—
—*
—
—*
—
—*
—
—*
—
—*
—
—*
—
—*
—
—*
—
1-446080-0
6-446080-0
—*
—
1-446080-2
—
—*
—
—*
—
—*
—
—*
—
1-446080-7
6-446080-7
—*
—
—*
—
—*
—
—*
—
* Part Numbers available upon request, contact TE Connectivity.
1-65
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
Receptacle Assemblies with Hybrid Cavities
A
± .012
[± 0.31]
8 Hybrid Cavity Shown
Housing Material — In accordance
with MIL-C-55302 or MIL-M-24519
type GLCP-30F
Contact Material and Finish —
Beryllium copper per QQ-C-533 or
copper nickel silicon per ASTM B422
and ASTM B888 Channel Contact and
Posted Contact — Plated .000050
[0.00127] gold in contact area, .000100
[0.00254] tin-lead on the tails over
.00030 [0.0076] nickel on the entire
contact; Solder Eyelet Contact — Plated
.000050 [0.00127] gold in the contact
area, in accordance with MIL-C-55302
.000100 [0.00254] tin-lead on the tails
over .000050 [0.00127] nickel on the
entire contact
Related Product Data
Mates with — Right-Angle Pin
Headers, pages 1-71 and 1-72
External Keying — page 1-80
Recommended PC Board Layout —
page 1-78
Post Stabilizer
Material: Per
MIL-C-55302
or MIL-M-24519
type GLCP-30F
.015
.220 +– .020
0.38
]
[5.59 +– 0.51
.015
E +– .020
0.38
]
[ +– 0.51
.015
.725 +– .020
0.38
[18.42 +– 0.51
]
[
.014 x .019 [0.36 x 0.48]
Channel Contact
Solder Eyelet Contact
(Max. Wire Size,
#26 AWG [0.15 mm])
]
Wrap-Type
Posted Contact
(3 terminations per post)
E = .235 [5.97] - 2 Hybrid cavity connector
.154 [3.91] - 4 and 6 Hybrid cavity connector
2 Hybrid Cavity Connectors1
No. of
Box Contact
Pos.
128
122
118
108
98
88
78
68
58
48
38
28
18
A
Dimensions
B
C
7.885
199.52
7.555
191.90
7.355
186.82
6.855
174.12
6.335
161.42
5.855
148.72
5.355
136.02
4.855
123.32
4.355
110.62
3.855
97.92
3.355
85.22
2.855
72.52
2.355
58.82
7.565
192.15
7.265
184.53
7.065
179.45
6.565
166.75
6.065
154.05
5.565
141.35
5.065
128.65
4.565
115.95
4.065
103.25
3.565
90.55
3.065
77.85
2.565
65.15
2.065
52.45
6.300
160.02
6.000
152.4
5.800
147.32
5.300
134.62
4.800
121.92
4.300
109.22
3.800
96.52
3.300
83.82
2.800
71.12
2.300
58.42
1.800
45.72
1.300
33.02
.800
20.32
.014 x .019 [0.36 x 0.48]
Channel Contacts
Part No.
—*
—*
—*
—*
—*
—*
533606-7
—*
533606-5
—*
—*
533606-2
533606-1
1These
receptacle assemblies accept coaxial contacts—Vertical Cable Socket 227605-1, Right-Angle Cable Socket
227606-1 and Vertical Printed Circuit Board Mount Socket 227603-1.
* Part Numbers available upon request, contact TE Connectivity.
1-66
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
Receptacle Assemblies with Hybrid Cavities (Continued)
4 Hybrid Cavity Connectors1
No. of
Box Contact
Pos.
A
110
100
90
80
70
60
50
40
30
7.565
192.15
7.065
179.45
6.565
166.75
6.065
154.05
5.565
141.35
5.065
128.65
4.565
115.95
4.065
103.25
3.565
90.55
3.065
77.85
D
5.900
149.86
5.400
137.16
4.900
124.46
4.400
111.76
3.900
99.06
3.400
86.36
2.900
73.66
2.400
60.96
1.900
48.26
1.400
35.56
.014 x .019
[0.36 x 0.48]
Channel Contacts
Part No.
Solder
Eyelet
Contacts
Part No.
Wrap-Type
Posted
Contacts
Part No.
—*
—*
—*
—*
—*
—*
533189-8
—*
533181-3
—*
—*
—*
—*
—*
—*
—*
—*
—*
—*
—*
—*
—*
—*
—*
533189-3
—*
—*
533189-2
—*
—*
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
1
Printed Circuit Board Connectors
7.855
199.52
7.355
186.82
6.855
174.12
6.355
161.42
5.855
148.72
5.355
136.02
4.855
123.32
4.355
110.62
3.855
97.92
3.355
85.22
120
Dimensions
B
C
6 Hybrid Cavity Connectors1
No. of
Box Contact
Pos.
112
102
92
82
72
62
52
42
32
22
Dimensions
.014 x .019
[0.36 x 0.48]
Channel Contacts
Part No.
A
B
C
D
7.855
199.52
7.355
186.82
6.855
174.12
6.355
161.42
5.855
148.72
5.355
136.02
4.855
123.32
4.355
110.62
3.855
97.92
3.355
85.22
7.565
192.15
7.065
179.45
6.565
166.75
6.065
154.05
5.565
141.35
5.065
128.65
4.565
115.95
4.065
103.25
3.565
90.55
3.065
77.85
5.500
139.7
5.000
127.0
4.500
114.3
4.000
101.6
3.500
88.9
3.000
76.2
2.500
63.5
2.000
50.8
1.500
38.1
1.000
25.4
.400
10.16
.400
10.16
.400
10.16
.400
10.16
.400
10.16
.400
10.16
.400
10.16
.400
10.16
.400
10.16
.400
10.16
533639-1
Wrap-Type
Contacts
Part No.
—*
—*
—*
—*
—*
533639-5
—*
—*
—*
8 Hybrid Cavity Connectors1
No. of
Box Contact
Positions
104
94
84
74
64
54
44
34
24
14
Dimensions
A
B
C
D
7.855
199.52
7.355
186.82
6.855
174.12
6.355
161.42
5.855
148.72
5.355
136.02
4.855
123.32
4.355
110.62
3.855
97.92
3.355
85.22
7.565
192.15
7.065
179.45
6.565
166.75
6.065
154.05
5.565
141.35
5.065
128.65
4.565
115.95
4.065
103.25
3.565
90.55
3.065
77.85
5.100
129.54
4.600
116.84
4.100
104.14
3.600
91.44
3.100
78.74
2.600
66.04
2.100
53.34
1.600
40.64
1.100
27.94
.600
15.24
.600
15.24
.600
15.24
.600
15.24
.600
15.24
.600
15.24
.600
15.24
.600
15.24
.600
15.24
.600
15.24
.600
15.24
—*
—*
—*
—*
—*
—*
—*
533170-8
—*
1-533170-0
1These
receptacle assemblies accept coaxial contacts — Vertical Cable Sockets 227605-1, Right-Angle Cable Socket
227606-1 and Vertical PC Board Mount Socket 227603-1.
* Part Numbers available upon request, contact TE Connectivity.
1-67
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
Right-Angle Pin Header Assemblies with Hybrid Contact Cavities
.770 ± .010
[19.56 ± 0.25]
8 Hybrid Cavity Shown
Related Product Data
A
.650 ± .010
[16.51 ± 0.25]
± .012
[± 0.31]
Mates with — Receptacles, pages
1-69 and 1-70
External Keying — page 1-80
Recommended PC Board Layout —
page 1-79
Fixed Jackscrews — page 1-61
.135 ± .015
[3.18 ± 0.38]
2 Hybrid Cavity Connectors1
Housing Material — In accordance
with MIL-C-55302 or MIL-M-24519
type GLCP-30F
2 Contact Material and Finish —
Brass per QQ-B-626 plated .000050
[0.00127] gold in the contact area,
.000100 [0.00254] tin-lead on the tail
over .000050 [0.00127] nickel on the
entire contact
3 Contact Material and Finish —
Same as above except for tin on the tail
No. of
Box Contact
Pos.
128
122
118
108
98
88
78
68
58
48
38
28
18
A
Dimensions
B
C
7.885
199.52
7.555
191.90
7.355
186.82
6.855
174.12
6.335
161.42
5.855
148.72
5.355
136.02
4.855
123.32
4.355
110.62
3.855
97.92
3.355
85.22
2.855
72.52
2.355
59.82
7.565
192.15
7.265
184.53
7.065
179.45
6.565
166.75
6.065
154.05
5.565
141.35
5.065
128.65
4.565
115.95
4.065
103.25
3.565
90.55
3.065
77.85
2.565
65.15
2.065
52.45
6.300
160.02
6.000
152.4
5.800
147.32
5.300
134.62
4.800
121.92
4.300
109.22
3.800
96.52
3.300
83.82
2.800
71.12
2.300
58.42
1.800
45.72
1.300
33.02
.800
20.32
Part No.2
RoHS
Part No.3
—*
—
—*
—
—*
—
—*
—
—*
—
—*
—
—*
—
—*
—
—*
—
—*
—
—*
—
533607-3
—
533607-1
5-533607-1
1These
pin header assemblies accept coaxial contacts—Vertical Cable Pin 227604-1 and Right-Angle Printed Circuit
Board Mount Pin 227602-1.
* Part Numbers available upon request, contact TE Connectivity.
1-68
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
Right-Angle Pin Header Assemblies with Hybrid Contact Cavities (Continued)
4 Hybrid Cavity Connectors1
No. of
Box Contact
Pos.
Dimensions
B
C
A
80
70
40
30
7.565
192.15
5.565
141.35
5.065
128.65
3.565
90.55
3.065
77.85
5.900
149.86
3.900
99.06
3.400
86.36
1.900
48.26
1.400
35.56
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
Part No.2
RoHS
Part No.3
1-533182-0
—
—*
—
—*
—
533182-3
—*
1
Printed Circuit Board Connectors
7.855
199.52
5.855
148.72
5.355
136.02
3.855
97.92
3.355
85.22
120
D
5-533182-3
—
6 Hybrid Cavity Connectors1
No. of
Box Contact
Pos.
112
102
92
82
72
62
52
42
32
22
Dimensions
A
B
C
D
7.855
199.52
7.355
186.82
6.855
174.12
6.355
161.42
5.855
148.72
5.355
136.02
4.855
123.32
4.355
110.62
3.855
97.92
3.355
85.22
7.565
192.15
7.065
179.45
6.565
166.75
6.065
154.05
5.565
141.35
5.065
128.65
4.565
115.95
4.065
103.25
3.565
90.55
3.065
77.85
5.500
139.7
5.000
127.0
4.500
114.3
4.000
101.6
3.500
88.9
3.000
76.2
2.500
63.5
2.000
50.8
1.500
38.1
1.000
25.4
.400
10.16
.400
10.16
.400
10.16
.400
10.16
.400
10.16
.400
10.16
.400
10.16
.400
10.16
.400
10.16
.400
10.16
Part No.
—*
—*
—*
—*
—*
533637-5
—*
—*
—*
—*
8 Hybrid Cavity Connectors1
No. of
Box Contact
Pos.
104
94
84
74
64
54
44
34
24
14
Dimensions
A
B
C
D
7.855
199.52
7.355
186.82
6.855
174.12
6.355
161.42
5.855
148.72
5.355
136.02
4.855
123.32
4.355
110.62
3.855
97.92
3.355
85.22
7.565
192.15
7.065
179.45
6.565
166.75
6.065
154.05
5.565
141.35
5.065
128.65
4.565
115.95
4.065
103.25
3.565
90.55
3.065
77.85
5.100
129.54
4.600
116.84
4.100
104.14
3.600
91.44
3.100
78.74
2.600
66.04
2.100
53.34
1.600
40.64
1.100
27.94
.600
15.24
.600
15.24
.600
15.24
.600
15.24
.600
15.24
.600
15.24
.600
15.24
.600
15.24
.600
15.24
.600
15.24
.600
15.24
Part No.
—*
533171-2
—*
—*
533171-5
—*
—*
533171-8
—*
1-533171-0
1These
pin header assemblies accept coaxial contacts—Vertical Cable Pin 227604-1 and Right-Angle Printed Circuit
Board Mount Pin 227602-1.
2See Material and Finish on previous page.
3See Material and Finish for RoHS Part Numbers on previous page.
* Part Numbers available upon request, contact TE Connectivity.
1-69
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
Microminiature COAXICON Contacts for Hybrid Cavities
Cable Pin
Right-Angle Pin
for PC Board Application
Part Number 227602-1
Plated .000030 [0.00076] gold
Cable Socket
Right-Angle Cable Socket
Cable
Size
RG 178/U Double Braid
RG 196/U
Contact
Style
Cable Pin
Cable Socket
Right-Angle
Cable Socket
Extraction Tool Part Number 220216-1
Part No.
227604-1
227605-1
227606-1
Application Tool
Part No.
220215-1
Vertical Socket
for PC Board Application
Part Number 227603-1
Notes:
1. Center contacts are plated with
.000030 [0.00076] gold.
2. For .125 [3.18] maximum thick
PC boards.
Electrical Characteristics
Contact Materials
Nominal Impedance — 50 ohms
Frequency Range — 0-2 GHz
Maximum Operating Voltage (Sea
Level) — 150 VAC RMS
Stainless Steel — QQ-S-766
Gold Plate — MIL-G-45204
Nickel Plate — QQ-N-290
Beryllium Copper — QQ-C-530
PTFE — MIL-P-19468A
Brass — QQ-B-626
Mechanical Characteristics
Operating Temperature Range —
–55°C to +125°C
Cable Retention — 15 lb. [66.7N]
min. (RG 178 type double braid)
Ferrule Material
Brass — MIL-C-50, tin plate per
MIL-T-10727
Recommended Strip Length
1-70
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
Recommended Printed Circuit Board Layouts
Receptacle Assemblies
[
Printed Circuit Board Connectors
[
1
]
]
.025 x .025 [0.64 x 0.64] Posted Contacts
[
]
.014 x .019 [0.36 x 0.48] Channel Contacts
Right-Angle .025 x .025 [0.64 x 0.64] Posted Contacts
[ 2.87
2.77]
[0.81
0.71 ]
.010 x .020 [0.25 x 0.51] Posted Contacts
No. of
Pos.
140
134
130
120
110
100
90
80
70
60
50
40
30
Card Extender Contacts
Dimensions
B
7.565
192.15
7.265
184.53
7.065
179.45
6.565
166.75
6.065
154.05
5.565
141.35
5.065
128.65
4.565
115.95
4.065
103.25
3.565
90.55
3.065
77.85
2.565
65.15
2.065
52.45
C
6.900
175.26
6.600
167.64
6.400
162.56
5.906
149.86
5.400
137.16
4.900
124.46
4.400
111.76
3.900
99.06
3.400
86.36
2.900
73.66
2.400
60.96
1.900
48.26
1.400
35.56
1-71
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
Recommended Printed Circuit Board Layouts (Continued)
Pin Header Assemblies
[2.87
2.77 ]
[5.38
5.28 ]
[0.81
]
0.71
Straddle Mount Assembly
[2.87
2.77 ]
D = Right-Angle Flow Solder - .035 [0.88] Dia. (Min.)
Wrap-Type Posts - .045 [1.14] Dia. (Min.)
Right-Angle Flow Solder and Wrap-Type Posted Contacts
Note: These drawings are for reference only. Consult TE Connectivity for
board layout details.
No. of
Pos.
140
134
130
120
110
100
90
80
70
60
50
40
30
Dimensions
B
C
7.565
6.900
192.15
175.26
7.265
6.600
184.53
167.64
7.065
6.400
179.45
162.56
6.565
5.906
166.75
149.86
6.065
5.400
154.05
137.16
5.565
4.900
141.35
124.46
5.065
4.400
128.65
111.76
4.565
3.900
115.95
99.06
4.065
3.400
103.25
86.36
3.565
2.900
90.55
73.66
3.065
2.400
77.85
60.96
2.565
1.900
65.15
48.26
2.065
1.400
52.45
35.56
1-72
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
3-Row Assembly Recommended Printed Circuit Board Layouts
Pin Header Assemblies
Receptacle Assemblies
1
Printed Circuit Board Connectors
[2.87
2.77 ]
2.87
[2.77
]
.014 x .019 [0.36 x 0.48] Channel Contacts
F = Right-Angle Flow Solder — .035 [0.88] Dia. Min.
Wrap-Type Posts — .045 [1.14] Dia. Min.
Right-Angle Flow Solder and Wrap-Type Posted Contacts
Note: These drawings are for reference only. Consult TE Connectivity for
board layout details.
.045
Right-Angle Wrap-Type Posted Contacts
No. of
Pos.
300
270
240
210
180
165
150
126
123
120
105
90
Dimensions
B
D
10.450
9.900
265.43
251.46
9.450
8.900
240.03
226.06
8.450
7.900
214.63
200.66
7.450
6.900
189.23
175.26
6.450
5.900
163.83
149.86
5.950
5.400
151.13
137.16
5.450
4.900
138.43
124.46
4.650
4.100
118.11
104.14
4.550
4.000
115.57
101.6
4.450
3.900
113.03
99.06
3.950
3.400
100.33
86.36
3.450
2.900
87.63
73.66
1-73
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
4-Row Assembly Recommended Printed Circuit Board Layouts
Receptacle Assemblies
Pin Header Assemblies
No. of
Pos.
300
292
280
268
260
240
232
220
216
200
192
180
168
160
152
140
128
120
100
68
40
Dimensions
B
D
7.950
7.400
201.93
187.96
7.750
7.200
196.85
182.88
7.450
6.900
189.23
175.26
7.150
6.600
181.61
167.64
6.950
6.400
176.53
162.56
6.450
5.900
163.83
149.86
6.250
5.700
158.75
144.78
5.950
5.400
151.13
137.16
5.850
5.300
148.59
134.62
5.450
4.900
138.43
124.46
5.250
4.700
133.35
119.38
4.950
4.400
125.73
111.76
4.650
4.100
118.11
104.14
4.450
3.900
113.03
99.06
4.250
3.700
107.95
93.98
3.950
3.400
100.33
86.36
3.650
3.100
92.71
78.74
3.450
2.900
87.63
73.66
2.950
2.400
74.93
60.96
2.150
1.600
54.60
40.64
1.450
.900
36.83
22.86
1-74
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
Hybrid Contacts Recommended Printed Circuit Board Layouts
Receptacle Assemblies
with Hybrid Contacts
With Cable
1
Printed Circuit Board Connectors
.014 x .019 [0.36 x 0.48] Channel Contacts
with Hybrid Printed Circuit Board Mount Sockets
With Solder Terminations
.014 x .019 [0.36 x0.48] Channel Contacts
with Vertical Coaxial Printed Circuit Board Mount Sockets
2 Hybrid Contact Connectors
No. of
Box Contact
Pos.
128
122
118
108
98
88
78
68
58
48
38
28
18
4 Hybrid Contact Connectors
No. of
Box Contact
Pos.
Dimensions
B
C
7.565
192.15
7.265
184.53
7.065
179.45
6.565
166.75
6.065
154.05
5.565
141.35
5.065
128.65
4.565
115.95
4.065
103.25
3.565
90.55
3.065
77.85
2.565
65.15
2.065
52.45
6.300
160.02
6.000
152.4
5.800
147.32
5.300
134.62
4.800
121.92
4.300
109.22
3.800
96.52
3.300
83.82
2.800
71.12
2.300
58.42
1.800
45.72
1.300
33.02
.800
20.32
120
110
100
90
80
70
60
50
40
30
B
Dimensions
C
D
7.565
192.15
7.065
179.45
6.565
166.75
6.065
154.05
5.565
141.35
5.065
128.65
4.565
115.95
4.065
103.25
3.565
90.55
3.065
77.85
5.900
149.86
5.400
137.16
4.900
124.46
4.400
111.76
3.900
99.06
3.400
86.36
2.900
73.66
2.400
60.96
1.900
48.26
1.400
35.56
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
6 Hybrid Contact Connectors
No. of
Box Contact
Pos.
112
102
92
82
72
62
52
42
32
22
B
Dimensions
C
D
7.565
192.15
7.065
179.45
6.565
166.75
6.065
154.05
5.565
141.35
5.065
128.65
4.565
115.95
4.065
103.25
3.565
90.55
3.065
77.85
5.500
139.7
5.000
127.0
4.500
114.3
4.000
101.6
3.500
88.9
3.000
76.2
2.500
63.5
2.000
50.8
1.500
38.1
1.000
25.4
.400
10.16
.400
10.16
.400
10.16
.400
10.16
.400
10.16
.400
10.16
.400
10.16
.400
10.16
.400
10.16
.400
10.16
1-75
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
Hybrid Contacts Recommended Printed Circuit Board Layouts (Continued)
Pin Header Assemblies
with Hybrid Cavities
.109–.113
[2.77–2.87] Dia.
Edge of PC Board
2 Hybrid Contact Connectors
6 Hybrid Contact Connectors
No. of
Box Contact
Pos.
No. of
Box Contact
Positions
Dimensions
128
122
118
108
98
88
78
68
58
48
38
28
18
B
C
7.565
192.15
7.265
184.53
7.065
179.45
6.565
166.75
6.065
154.05
5.565
141.35
5.065
128.65
4.565
115.95
4.065
103.25
3.565
90.55
3.065
77.85
2.565
65.15
2.065
52.45
6.300
160.02
6.000
152.4
5.800
147.32
5.300
134.62
4.800
121.92
4.300
109.22
3.800
96.52
3.300
83.82
2.800
71.12
2.300
58.42
1.800
45.72
1.300
33.02
.800
20.32
112
102
92
82
72
62
52
42
32
22
No. of
Box Contact
Positions
94
84
4 Hybrid Contact Connectors
120
80
70
40
30
Dimensions
C
D
7.565
192.15
7.065
179.45
6.565
166.75
6.065
154.05
5.565
141.35
5.065
128.65
4.565
115.95
4.065
103.25
3.565
90.55
3.065
77.85
5.500
139.7
5.000
127.0
4.500
114.3
4.000
101.6
3.500
88.9
3.000
76.2
2.500
63.5
2.000
50.8
1.500
38.1
1.000
25.4
.400
10.16
.400
10.16
.400
10.16
.400
10.16
.400
10.16
.400
10.16
.400
10.16
.400
10.16
.400
10.16
.400
10.16
8 Hybrid Contact Connectors
104
No. of
Box Contact
Positions
B
74
B
Dimensions
C
D
7.565
192.15
5.565
141.35
5.065
128.65
3.565
90.55
3.065
77.85
5.900
149.86
3.900
99.06
3.400
86.36
1.900
48.26
1.400
35.56
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
64
54
44
34
24
14
B
Dimensions
C
D
7.565
192.15
7.065
179.45
6.565
166.75
6.065
154.05
5.565
141.35
5.065
128.65
4.565
115.95
4.065
103.25
3.565
90.55
3.065
77.85
5.100
129.54
4.600
116.84
4.100
104.14
3.600
91.44
3.100
78.74
2.600
66.04
2.100
53.34
1.600
40.64
1.100
27.94
.600
15.24
.600
15.24
.600
15.24
.600
15.24
.600
15.24
.600
15.24
.600
15.24
.600
15.24
.600
15.24
.600
15.24
.600
15.24
1-76
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
Keying Hardware — MIL-C-55302 Qualified
Guide Keys
Receptacle Key
For use with Receptacles
Kit Part Number 530341-3
Kit includes 2 each of the following:
Keys, passivated stainless steel
Part Number 530341-1
Military Part Number M55302/31-04
Screws, #2-56 .250 [6.35] long
Guide Keying Pin and Insert
For use with 2-row Receptacles and 2-row Straddle Mount Pin Headers
Kit Part Number 531715-11
Kit includes 2 each of the following:
Guide keying pin, passivated stainless steel
Part Number 531713-1
.170
Nut, #2-56
[4.32]
Part Number 23174-1
Guide keying insert,
passivated stainless steel
Part Number 531714-1
Rivet, nickel plated brass
Part Number 530347-9
Guide Keying Pin and Insert
For use with 2- and 3-row Receptacles and Right-Angle Pin Headers
Kit Part Number 531715-21
Kit includes 2 each of the following:
Guide keying pin, passivated stainless steel
Part Number 531713-1
Nut, #2-56
Part Number 23174-1
Guide keying insert, passivated
stainless steel
Part Number 531714-1
Rivet, nickel plated brass
Part Number 530347-8
Pin Header Key
For use with 2-row Straddle Mount Pin Headers
Kit Part Number 530341-41
Kit includes 2 each of the following:
Keys, passivated stainless steel
Part Number 530341-1
Military Part Number
M55302/31-04
.170
Rivets, nickel plated brass
[4.32]
Part Number 530347-1
Military Part Number M55302/31-05
Pin Header Key
For use with 2-, 3-, and 4-row Pin Headers
Kit Part Number 530341-51
Kit includes 2 each of the following:
Keys, passivated stainless steel
Part Number 530341-1
Military Part Number M55302/31-04
Rivets, nickel plated brass
Part Number 530347-3
Military Part Number
M55302/31-10
1
Printed Circuit Board Connectors
External Keys
Clinching Tools:
2-Row Pin Headers—Tool Part Number 91117-1
(See instruction sheet 408-7803)
3-Row Pin Headers—Tool Part Number 91117-4
(See instruction sheet 408-6627)
1Rivet
Guide Pin/Insert
Guide Pin
Passivated stainless steel
1Rivet
Clinching Tools:
2-Row Pin Headers—Tool Part Number 91117-1
(See instruction sheet 408-7803)
3-Row Pin Headers—Tool Part Number 91117-3
(See instruction sheet 408-6626)
4-Row Pin Headers—Tool Part Number 92-0800-003
Solid Keying Pin
Solid keying pins are for use on connectors when external
keying is not used or on external keyed assemblies when
more than 64 keying positions are required. Solid keying
pins are not to be installed in the three dual positions at
each end of the connector.
A
.400
10.16
.680
17.27
.750
19.05
Part No.
530345-1
—
530345-3
Guide Insert
Passivated stainless steel
Part Number 530346-1
(Consult TE Connectivity for mounting recommendations)
Keying Sleeve
Keying sleeves, like solid keying pins, are used as an alternative
to external keys or when additional keying is required. When the
keying sleeve is used on the pin header, the contact must be
removed from the receptacle assembly and the cavity reamed to
.062 [1.57] diameter.
Material — Nickel plated brass
Material: Nickel plated brass
Part Number 530328-2
Military Part Number M55302/31-03
Assembly Instructions:
1. Remove pin and receptacle from desired keying locations.
2. Insert keying pin in pin header, secure by bending rear of pin over outside edge of housing, and trim
excess material.
L
.305
7.75
.250
6.35
MIL-Part No.
M55302/
Part No.
31-01
583254-3
31-02
583254-4
1-77
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box .100 [2.54] Centerline Connectors
Replacement Contacts — MIL-C-55302 Qualified
Plating Code
Pin Contacts
Plating
Code
1
2
AMP
Part No.
202947-2
202947-3
Receptacle Contacts
Plating
Code
3
4
AMP
Part No.
202946-1
202946-7
Contacts are plated in various thicknesses. These
thicknesses are coded in
the charts as follows:
1. — .000030 [0.00076] gold
in the contact area, .000100
[0.00254] tin-lead on the tail
over .000050 [0.00127] nickel
on the entire contact.
2. — .000050 [0.00127] gold
in the contact area, .000100
[0.00254] tin-lead on the tail
over .000050 [0.00127] nickel
on the entire contact.
3. — .000030 [0.00076] gold
in the contact area, .000100
[0.00254] tin-lead on the tail
over .000030 [0.00076] nickel
on the entire contact.
4. — .000050 [0.00127] gold
over .000030 [0.00076] nickel.
5. — .000050 [0.00127] gold
in the contact area, .000100
[0.00254] tin-lead on the tail
over .000030 [0.00076] nickel
on the entire contact.
6. — .000030 [0.00076] gold
in the contact area, in accordance with MIL-C-55302,
.000100 [.00254] tin-lead on
the tails over .000030 [0.00076]
nickel on the entire contact.
7. — .000050 [0.00127] gold
in the contact area, in accordance with MIL-C-55302
.000100 [0.00254] tin-lead on
tails over .000050 [0.00127]
nickel on the entire contact.
Plating
Code
5
6
AMP Part No.
3-Row
2-Row
Connectors Connectors
202946-7
202946-5
202946-1
202946-2
L Length Equals .540 Max. for
2-Row .619 Max for 3-Row
Plating
MILAMP
Code
Part No.
Part No.
5
—
—
6
—
—
7
M55302/32-01 583218-3
For 2-Row Only
Plating
Code
3
5
AMP
Part No.
583452-4
1-583452-9
Contact Extraction
Pin Contacts
Extraction Tool
Part Number 91156-1
Receptacle Contacts
Extraction Tool
Part Number 91035-1
Military Part Number
M81969/9-01
Posted Receptacle Contacts
Wrap-Type Contact for Rack Mounting
Double Latch .025 x .025 [0.64 x 0.64] Post
Posted Receptacle Contacts
Contact for Rack Mounting
Extraction Tool
Part Number 1-265871-7
(Extraction Tool Instruction sheet
408-2636)
Contact for PC Board
No tool needed — After de-soldering,
extract by pressing on post end of
contact.
No.
Terminations
Dim.
L
1 High
.795
20.0
.955
24.26
1.115
28.32
2 High
3 High
Wrap-Type Contact for PC Mounting
Single Latch .022 x .027 [0.56 x 0.69] Post
For Rack Mount (Double Latch) For PC Mount (Single Latch)
Plating Code 3
Plating Code 4
Plating Code 3
Plating Code 4
Part No.
MIL-Part No.
Part No.
Part No.
MIL-Part No.
Part No.
446629-6
M55302/32-05
1-446629-4
—
M55302/32-02
2-583812-6
446629-9
M55302/32-06
1-446629-6
—
M55302/32-03
2-583812-8
1-446629-2
M55302/32-07
1-446629-8
583812-9
M55302/32-04
3-583812-0
1-78
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box II—Two-Piece, High Density
Printed Circuit Board Connectors
Vertical Receptacles with ACTION PIN Posts and Solder Post Contacts
Product Facts
Horizontal motherboard
stacking capability
■
Mateable with AMP-HDI pin
assemblies
■
4-beam box-type receptacle
contact design provides
four areas of contact per
connection
■
Available with ACTION PIN
contacts or solder posts
■
Inserts into standard .100
[2.54] grid
■
Keying system provides 64
combinations without loss
of contact count
■
High temperature material
permits vapor phase reflow
soldering
■
Low mating forces
■
Highly economical for
quality and density
■
Product Specification
108-9003
1
Printed Circuit Board Connectors
■
TE Connectivity vertical
receptacle assemblies,
when mated with AMP-HDI
pin assemblies, permit
horizontal stacking of
motherboards. They are
available with two, three or
four rows of contacts on a
.100 [2.54] grid and with a
choice of either ACTION
PIN posts or solder posts.
The required PC board hole
sizes and patterns of these
receptacle assemblies allow
space-efficient circuitry
layout. The box-type, quad
redundant receptacle
contacts with selective gold
plating in the contact area
deliver high reliability while
maintaining low mating force.
In addition, contact and
housing configurations
prevent pin damage if a
long connector is “peeled”
apart from one end.
Features such as 64combination keying and
high temperature housing
materials add to the appeal
of TE vertical receptacle
assemblies.
These connectors are
highly specialized products
for applications demanding
their unusual characteristics.
1-79
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box II—Two-Piece, High Density
Printed Circuit Board Connectors
Horizontal Motherboard Stacking
(Not Recommended for MFBL Applications)
Multiple stacking of motherboards on backplanes is
readily achieved using
TE Connectivity vertical
receptacle assemblies and
AMP-HDI pin assemblies.
This unique board-to-board
interconnection concept
eliminates exposed contacts inherent with open pin
fields. Vertical receptacle
assemblies with either
ACTION PIN posts or solder
posts provide the same low
.600 [15.24] stack height
between boards.
Note: The .600 [15.24] board-to-board stacking height is also achieved using vertical receptacle assemblies with
solder posts.
1-80
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box II—Two-Piece, High Density
Printed Circuit Board Connectors
Four-Row Vertical Receptacle Assemblies Without Guide Holes
ACTION PIN Posts
and Solder Posts
1
Printed Circuit Board Connectors
Material and Finish
Housing — Brown glass-filled
polyphenylene sulfide
Contacts — ACTION PIN (phosphor
bronze), solder (beryllium copper),
plated as follows:
A .000030 [0.00076] gold in contact
area, tin-lead on posts, with entire
contact underplated .000050-.000100
[0.00127-0.00254] nickel
B Gold flash over .000050-.000100
[0.00127-0.00254] nickel on entire contact, with .000030 [0.00076] gold on
contact area and for .200 [5.08] from tip
of ACTION PIN post
C .000050 [0.00127-0.00254] gold in
contact area, tin-lead on posts, with
entire contact underplated .000050.000100 [0.00127-0.00254] nickel
D RoHS Part Numbers same as
A plating except for tin on posts
Related Product Data
Mateable Connectors —
Vertical Pin Headers —
Base numbers 533435, 533254, 533270,
532448, 532436
90° Pin Headers —
Base numbers 533444, 533286
Consult TE Connectivity for part number
details.
Accessories —
Keys — page 1-92
Jackscrews — page 1-93
PCB Hole Layouts — page 1-88
Application Tooling — page 1-91
Technical Documents —
Product Specifications
108-9069, 108-26003
Application Specification
114-9010
Instruction Sheets 408-6927,
408-6979, 408-6989, 408-9185
Dimensions
B
C
No. of
Pos.
Contact
Finish
A
300
8.250
209.55
7.950
201.93
7.524
191.11
7.400
187.95
280
7.750
196.85
7.450
189.23
7.024
178.41
6.900
175.26
260
7.250
184.15
6.950
176.53
6.524
165.71
6.400
162.56
240
6.750
171.45
6.450
163.83
6.024
153.01
5.900
149.86
232
6.550
166.37
6.250
158.75
5.824
147.93
5.700
144.78
216
6.150
156.21
5.850
148.59
5.424
137.77
5.300
134.62
200
5.750
146.05
5.450
138.43
5.024
127.61
4.900
124.46
180
5.250
133.35
4.950
125.73
4.524
114.91
4.400
111.76
160
4.750
120.65
4.450
113.03
4.024
102.21
3.900
99.06
140
4.250
107.95
3.950
100.33
3.524
89.51
3.400
86.36
A
128
3.950
100.33
3.650
92.71
3.224
81.89
3.100
78.74
100
3.250
82.55
2.950
74.93
2.524
64.11
2.400
60.96
A
D
A
B
D
D
A
B
D
A
A
D
A
B
D
A
D
A
D
A
B
D
B
D
A
C
D
Part Numbers*
ACTION PIN Posts
Solder Posts
.500 [12.7] .250 [6.35] .149 [3.78] .180 [4.57]
Length
Length
Length
Length
—
1-533427-2 1-533285-2
—
1-533656-2
—
—
—
—
—
6-533285-2
—
—
—
—
—
533656-9
—
—
—
—
—
—
533656-7
—
533656-6
—
—
—
—
—
1-533427-0
—
533427-9
—
—
—
—
—
—
—
—
—
—
—
533427-5
—
—
—
—
—
533694-1
533656-1
—
—
533427-3
—
533427-1
—
—
1-533285-1
—
1-533285-0
—
6-533285-0
—
533285-9
—
—
—
5-533285-9
—
—
533499-2
—
5-533499-2
—
533499-1
—
5-533499-1
533285-7
—
—
—
5-533285-7
—
533285-6
—
5-533285-6
—
533285-5
533492-1
650844-1
—
5-533285-5
—
533285-4
—
533285-3
5-533285-3
533285-1
—
5-533285-1
—
—
—
—
—
*Other connector sizes and solder post lengths can be made available. Consult TE Connectivity.
1-81
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box II—Two-Piece, High Density
Printed Circuit Board Connectors
Four-Row Vertical Receptacle Assemblies Without Guide Holes (Continued)
Material and Finish
Housing — Natural (brown)
polyphenylene sulfide
Contacts — Beryllium copper,
.000050–.000100 [0.00127–0.00254]
nickel underplate over .000030
[0.00076] gold in contact area, tin-lead
plated solder tails
Solder Posts .149 [3.78] Length
Mounting Ears Have .285 [7.24] C’Bore x .080 [2.03] Deep
No. of
Pos.
Dimensions
B
C
5.450
4.824
133.35 122.53
2.150
1.724
54.61
43.79
A
5.600
142.24
2.500
63.50
192
68
D
4.700
119.38
1.600
40.64
With Special Mounting Ears
A
± .006
[± 0.15]
B
± .006
[± 0.15]
Contact
Finish
Part No.
A
533484-1
A
533484-2
.080
[2.03]
.110 Dia. Thru
[2.79] Typ.
2 Plcs.
.280–.290 Dia. C’Bore x .080 Deep
[7.11–7.37] Typ. 2 Plcs.
[2.03]
.070
[1.78]
C
.149 ± .015
[3.78 ± 0.38]
.275
[6.99]
.585
[14.86]
.460
[11.68]
.018
[0.46]
.315
[8.00]
.400
[10.16]
.020 x .010
[0.51 x 0.25]
D
.100
[2.54]
.200
[5.08]
.300
[7.62]
B
.275
[6.99]
D
.300
[7.62]
.100
[2.54]
.114 Dia. Typ.
[2.90] 2 Plcs.
.040 ± .003 Dia.
[1.02 ± 0.08] Typ.
.200
[5.08]
Recommended PC Board Layout
Without Mounting Ears
1.524
[38.71]
.300
[7.62]
.100 .200
[2.54] [5.08]
1.400
[35.56]
.275
[6.99]
.020
[0.51]
.020 x .010
Typ.
[0.51 x 0.25]
.400
[10.16]
.124 ± .015
[3.15 ± 0.38]
1.400
[35.56]
.585
[14.86]
.460
[11.68]
.300
[7.62]
.100
Typ.
[2.54]
.037–.043 Dia.
[0.94–1.09] Typ.
Recommended PC Board Layout
Part Number 533472-2
RoHS Part Number 5-533472-2
60 Position
1-82
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box II—Two-Piece, High Density
Printed Circuit Board Connectors
Three-Row Vertical Receptacle Assemblies Without Guide Holes
ACTION PIN Posts
and Solder Posts
1
Printed Circuit Board Connectors
Material and Finish
Housing — Brown glass-filled
polyphenylene sulfide
Contacts — ACTION PIN (phosphor
bronze), solder (beryllium copper),
plated as follows:
A .000030 [0.00076] gold in contact
area; tin-lead on posts, with entire contact underplated .000050-.000100
[0.00127-0.00254] nickel
B Gold flash over .000050-.000100
[0.00127-0.00254] nickel on entire contact, with .000030 [0.00076] gold on
contact area and for .200 [5.08] from tip
of ACTION PIN post
C RoHS Part Numbers same as
A plating except for tin on posts
Related Product Data
Mateable Connectors —
Vertical Pin Headers —
Base numbers 532432, 533061, 533093,
532447, 532433
90° Pin Headers —
Base numbers 533420, 533288
Consult TE Connectivity for part number
details.
Accessories —
Keys — page 1-92
Jackscrews — page 1-93
PCB Hole Layouts — page 1-89
Application Tooling — page 1-91
Technical Documents —
Product Specifications
108-9069, 108-26003
Application Specification 114-9010
Instruction Sheets 408-6927,
408-6981, 408-6989, 408-9185
Dimensions
B
C
Contact
Finish
Part Numbers*
ACTION PIN Posts
Solder
.250 [6.35]
.149 [3.78]
Length
Length
—
—
—
—
533657-7
533287-7
—
—
—
5-533287-7
No. of
Pos.
A
174
6.550
166.37
6.250
158.75
5.824
147.93
5.700
144.78
150
5.750
146.05
5.450
138.43
5.024
127.61
4.900
124.46
120
4.750
120.65
4.450
113.03
4.024
102.21
3.900
99.06
A
533657-5
105
4.250
101.95
3.950
100.33
3.524
89.51
3.400
86.36
96
3.950
100.33
3.650
92.71
3.224
81.89
3.100
78.74
A
C
A
C
—
—
—
—
D
A
C
A
B
C
Posts
.180 [4.57]
Length
533495-3
5-533495-3
—
533495-2
5-533495-2
533287-5
—
533287-4
5-533287-4
533287-3
5-533287-3
—
—
—
—
*Other connector sizes and solder post lengths can be made available, consult TE Connectivity.
1-83
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box II—Two-Piece, High Density
Printed Circuit Board Connectors
Two-Row Vertical Receptacle Assemblies Without Guide Holes
ACTION PIN Posts
and Solder Posts
Material and Finish
Housing — Brown glass-filled
polyphenylene sulfide
Contacts — ACTION PIN (phosphor
bronze), solder (beryllium copper),
plated as follows:
A .000030 [0.00076] gold in contact
area, tin-lead on posts, with entire contact underplated .000050-.000100
[0.00127-0.00254] nickel
B Gold flash over .000050-.000100
[0.00127-0.00254] nickel on entire contact, with .000030 [0.00076] gold on
contact area and for .200 [5.08] from tip
of ACTION PIN post
C RoHS Part Numbers same as
A plating except for tin on posts
Related Product Data
Mateable Connectors —
Vertical Pin Headers —
Base numbers 533060, 532446, 532430,
532091, 532430
90° Pin Headers —
Base numbers 533515, 533295
Consult TE Connectivity for part number
details.
Accessories —
Keys — page 1-92
Jackscrews — page 1-93
PCB Hole Layouts — page 1-89
Application Tooling — page 1-91
Technical Documents —
Product Specifications
108-9069, 108-26003
Application Specification
114-9010
Instruction Sheets 408-6927,
408-6980, 408-6989, 408-9185
No. of
Pos.
200
80
A
10.750
273.05
4.750
120.65
Dimensions
B
C
10.450
265.43
4.450
113.03
10.024
254.61
4.024
102.21
Contact
Finish
D
Part Numbers*
ACTION PIN Posts
.500 [12.7]
.250 [6.35]
Length
Length
Solder Posts
.149 [3.78]
Length
9.900
251.46
3.900
99.06
A
—
1-533650-9
B
533693-7
—
—
—
—
—
—
533289-5
5-533289-5
—
60
3.750
95.25
3.450
87.63
3.024
76.81
2.900
73.66
A
C
40
2.750
69.85
1.750
44.45
2.450
62.23
1.450
36.83
2.024
51.41
1.024
26.10
1.900
48.26
.900
22.86
A
533693-3
—
533289-3
A
—
—
533289-1
20
*Other connector sizes and solder post lengths can be made available, consult TE Connectivity.
1-84
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box II—Two-Piece, High Density
Printed Circuit Board Connectors
Recommended Printed Circuit Board Hole Layouts
Four-Row
Receptacle Assemblies
Without Guide Holes
1
Printed Circuit Board Connectors
Notes: 1. ACTION PIN posts require .093 [2.36] min. thick PC board. For ACTION PIN
post plated-through hole specifications, see page 1-90.
2. Plated-through hole diameter for solder posts is .037-.043 [0.94-1.09];
recommended pad diameter is hole diameter plus .020 [0.51].
No. of
Pos.
300
280
260
240
232
216
200
180
160
140
128
120
100
40
Dimensions
B
7.950
201.93
7.450
189.23
6.950
176.53
6.450
163.83
6.250
166.37
5.850
148.59
5.450
138.43
4.950
125.73
4.450
113.03
3.950
100.33
3.650
92.71
3.450
87.63
2.950
74.93
1.450
36.83
D
7.400
187.96
6.900
175.26
6.400
162.56
5.900
149.86
5.700
144.78
5.300
134.62
4.900
124.46
4.400
111.76
3.900
99.06
3.400
86.36
3.100
78.74
2.900
73.66
2.400
60.96
.900
22.86
1-85
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box II—Two-Piece, High Density
Printed Circuit Board Connectors
Recommended Printed Circuit Board Hole Layouts (Continued)
Three-Row Receptacle Assemblies
Without Guide Holes
Two-Row Receptacle Assemblies
Without Guide Holes
B
.275
[6.99]
B
.275
[6.99]
D
.100
[2.54] Typ.
.120
[3.05] Dia. Typ.
See Notes 1 and 2.
.100
[2.54]
Typ.
.120
[3.05] Dia. Typ.
Notes: 1. ACTION PIN posts require .093 [2.36] min. thick PC board.
For ACTION PIN post plated-through hole specifications, see page 1-90.
2. Plated-through hole diameter for solder posts is .037-.043 [0.94-1.09];
recommended pad diameter is hole diameter plus .020 [0.51].
174
150
120
105
96
.050
[1.27]
Typ.
See Notes 1 and 2.
Notes: 1. ACTION PIN posts require .093 [2.36] min. thick PC board.
For ACTION PIN post plated-through hole specifications, see page 1-90.
2. Plated-through hole diameter for solder posts is .037-.043 [0.94-1.09];
recommended pad diameter is hole diameter plus .020 [0.51].
Dimensions
B
6.250
158.75
5.450
138.43
4.450
113.03
3.950
100.33
3.650
92.71
.100
[2.54]
Vertical Receptacle Assemblies
with ACTION PIN Contacts and Solder Posts
Vertical Receptacle Assemblies
with ACTION PIN Contacts and Solder Posts
Pos.
.100
[2.54] Typ.
.200
[5.08]
.100
[2.54] Typ.
No. of
D
Dimensions
No. of
D
5.700
144.78
4.900
124.46
3.900
99.06
3.400
86.36
3.100
78.74
Pos.
200
80
60
40
30
20
B
10.450
265.43
4.450
113.03
3.450
87.63
2.450
62.23
1.950
49.53
1.450
36.83
D
9.900
251.46
3.900
99.06
2.900
73.66
1.900
48.26
1.400
35.56
.900
22.86
1-86
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box II—Two-Piece, High Density
Printed Circuit Board Connectors
ACTION PIN Press-Fit Contacts
1
Printed Circuit Board Connectors
ACTION PIN contacts provide a reliable press-fit connection.
Localized pressure in the interface area promotes oxide
breakthrough and prevents corrosion in harsh environments
to provide a reliable connection. Also, radial and axial
distortion are controlled to meet today's standards for
multilayer board applications.
PC Board Thickness
1
ACTION PIN contacts
are designed for use in a
variety of PC board thicknesses. However, certain
ACTION PIN contacts are to
be used in specific ranges
of board thicknesses. For
optimum performance,
the recommended board
thicknesses provided with
the connector being used
must be followed.
3
1
Annular Ring (See Note)
2
Drilled Hole
3
Copper Thickness
4
Tin-Lead Thickness
5
Plated-Through Hole
4
5
2
ACTION PIN Contact/PC Board Applications
ACTION PIN
Connector
Type
Vertical
Receptacle
Assemblies
Plating Thicknesses
Contact
Material Thickness
Drilled Hole
Diameter
Copper *
.025
0.64
.0453±.001
1.151±0.03
.001-.003
0.03-0.08
Tin-Lead
.0003 Min.
0.008
Plated-Through
Radial Hole Distortion
Hole
Diameter
Average
Maximum
.037-.043
0.94-1.09
Not
Specified
Not
Specified
*Maximum hardness of copper layer is 150 Knoop
Note: Recommended annular ring diameter is hole diameter plus .020 [0.51]
1-87
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box II—Two-Piece, High Density
Printed Circuit Board Connectors
Application Tooling
Receptacle assemblies with
ACTION PIN contacts allow high
speed, solderless backplane
construction through reliable
press-fit application. Press fitting
connectors to printed circuit
boards requires special seating
tools which transfer application
force directly to the contacts.
Each spring-loaded seating
tool features a push plate, push
pin housing, and locator housing. The push plate provides
the bearing surface for the
application tooling which forces
the ACTION PIN posts into the
PC board. The push pin housing holds the same number of
push pins as the connector
size (no. of contact positions).
The locator housing fits over
the connector body to align the
components for proper seating.
Compression springs (approximately one for every seven
contacts) and guide pins (one
at each end) provide tool alignment and stability.
Board support fixtures are used
to support PC boards or backplanes while connectors are
being assembled to the boards
or backplanes. TE Connectivity
Instruction Sheet 408-6927
provides recommendations for
manufacturing board support
fixtures.
Force applied to the tool to
seat the connectors can be
provided by the TE seating
machines shown below, or by
commercially available handoperated arbor presses such
as Greenerd 3A or 3B. Refer to
Instruction Sheet 408-9027 for
use of TE adapter kits with
these presses.
For tooling information, contact
Technical Support.
MANTA Servo Electric Press
Receptacle Assembly Configuration
No. of
No. of
Total No.
Rows
Pins/Row
of Pins
25
100
30
120
32
128
35
140
Four
(without
45
180
Guide Holes)
60
240
65
260
67
268
75
300
32
96
Three
33
99
(without
50
150
Guide Holes)
67
201
15
30
28
56
Two
35
70
(without
60
120
Guide Holes)
67
134
70
140
Electric Servo Press created to
satisfy the increasing need for a
“Low Cost” method of controlled connector pressing into
today’s complex circuit boards.
The MANTA can precisely control force and speed of each
pressing cycle. Quality feedback is accessible in the form
of SPC analysis, display, and
reports. The “C-Frame” design,
with a 12-inch throat depth,
accommodates a wide range of
smaller printed circuit boards.
Seating Tool
Numbers
58279-2
58279-4
58279-8
58279-9
58279-5
58279-3
58279-7
58279-1
58279-6
58277-2
58277-3
58277-4
58277-1
58280-4
58280-1
58280-6
58280-5
58280-2
58280-3
BMEP-3T/5T Bench Top
Electric Servo Press
(3 or 5 ton)
PC-controlled, cost effective
bench mounted machine for
semi-automatic pressing of
ACTION PIN (Compliant Pin,
Pressfit) connectors into printed
circuit boards. The pressing
force is delivered by an allelectric servomotor, providing
precise control of force, speed,
and seating height. A touch
screen monitor provides a
user-friendly interface and a bar
code scanner provides PCB
serial number input for product
tracking.
1-88
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box II—Two-Piece, High Density
Printed Circuit Board Connectors
Keying Hardware and Applications
1
Printed Circuit Board Connectors
Screw, 2-56 UNC x .250 [6.35]
Long plus thickness of panel
Rivet (Supplied with
Key Kits for 2-Row
Receptacles)
Key for Pin
Assembly
Key Kit for
Receptacle
Assembly
Screw, 2-56 UNC x .250 [6.35]
(Supplied with Key Kits for
3- and 4-Row Receptacles
Keys for Pin Assemblies
Material and Finish
.305
[7.74]
Passivated Stainless Steel
Key Part Number 530341-1
Key Part Number 530341-6
(contains 2 per package)
.240
[6.09]
Note: Customer must supply screws; .250
[6.35] min. long, plus thickness of panel.
Key Kits for Three- and Four-Row Receptacles
Screw, 2-56 UNC x .250 [6.35]
(cross recessed head)
Material and Finish
Key — Passivated Stainless Steel
Screw — Passivated Stainless Steel
Screw, 2-56 UNC x .250 [6.35]
(slotted head)
Location Indicator
Location Indicator
Kit Number 530341-3
(includes 2 keys and 2 screws)
Kit Number 530341-7
(includes 2 keys and 2 screws)
Rivet
Location Indicator
Kit Number 530341-5
(includes 2 keys and 2 rivets)
Note: Use Clinching Tool Number 91117-3
(See Instruction Sheet 408-6626.)
Key Kit for Two-Row Receptacles
Rivet
Material and Finish
Key — Passivated Stainless Steel
Rivet — Nickel plated brass
Location Indicator
Kit Number 530341-4
(includes 2 keys and 2 rivets)
Note: Use Clinching Tool Number 91117-5
(See Instruction Sheet 408-9178.)
1-89
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Box II—Two-Piece, High Density
Printed Circuit Board Connectors
Mating Hardware and Applications
Jackscrews for
Three- and Four-Row
Connectors Only
Roll Pin
Fixed Male
Jackscrew
Turnable Female
Jackscrew
Roll Pin
See Instruction Sheet 408-6909.
Fixed Female
Jackscrew
Knob
Turnable Male
Jackscrew
Knob
Dimension
L
.750
19.05
.625
15.88
.525
14.61
Roll Pin
Material Fixed Female
and
(Threaded)
Finish Part Numbers
Plain
Stainless Steel 533424-1
Passivated
Stainless Steel 533424-2
Plain
Stainless Steel
Passivated
Stainless Steel
Plain
Stainless Steel
Passivated
Stainless Steel
533424-3
.495
[12.57]
4-40 UNC-2A
Fixed Female
Part Number 532805-1
533424-4
.320
[8.13]
533424-5
.790
[20.08]
533424-6
Turnable Male
2-56 UNC-2A
L
Knob
(See Chart at Right)
Dimension
L
.500
12.70
L
Fixed Female
(Threaded)
(See Chart at Left)
Turnable Male
Part Numbers
532805-3*
*Knob with screwdriver slot
Dimension
L
.695
17.65
.960
24.38
Material Fixed Male
and
(Threaded)
Finish Part Numbers
Plain
Stainless Steel 533423-1
Passivated
Stainless Steel 533423-2
Plain
Stainless Steel 533423-3
Roll Pin
4-40 UNC-2A
.440
[11.18]
Fixed Male
Part Number 532804-5
L
.265
[6.73]
.845
[21.46]
L
Turnable Female
Knob
(See chart at Right)
2-56 UNC-2A
4-40 UNC-2A
Dimension
L
.500
12.70
Fixed Male
(Threaded)
(See Chart at Left)
Turnable Male
Part Numbers
532804-3*
*Knob with screwdriver slot
1-90
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
AMPMODU .100 [2.54]
Centerline Connectors per MIL-C-55302
Introduction
Product Facts
Qualified to
MIL-C-55302/127 and /128
■
Mates with .025 x .025
[0.64 x 0.64] posts
■
Dual cantilever spring
contact design and built-in
anti-overstress
■
Wide misalignment
tolerances
■
One-piece phosphor bronze
contacts, plated gold over
nickel per MIL-C-55302
■
.100 [2.54] centerline
spacing
■
Choice of single or double
row assemblies
■
Assemblies available for
.062 [1.57] or .093 [2.36]
thick PC boards
■
Special right-angle receptacle configurations available
1
Printed Circuit Board Connectors
■
AMPMODU Receptacle
Assemblies per MIL-C-55302
are specifically designed
to meet today’s need for
a reliable, modular interconnection system for
advanced electronic
packaging.
These right-angle assemblies mate with the electronic
industry’s popular, .025 x
.025 [0.64 x 0.64] posts. This
means that the AMPMODU
Connector system may be
used with a host of applications … from individual
PC board mount posts to
complex post headers and
connectors.
Housings are made of blue
diallyl phthalate, 94V-0 rated
thermoplastic, and are
pre-loaded with phosphor
bronze contacts, plated
.000050 [0.00127] gold
over .000050 [0.00127]
nickel per MIL-C-55302.
A special AMPMODU
Receptacle Assembly is
available for high temperature requirements. This
double row, right-angle
assembly has a housing
made of polyphenylene
sulfide (PPS) GST-40F, per
MIL-M-24519 with a choice
of contact platings.
Keying plugs are available
for all assembly configurations.
Technical Features
Center Spacing — 0.100 [2.54]
Housing Materials — Polyphenylene
sulfide or diallyl phthalate
Flammability Rating — 94 V-O
Contact Material — Phosphor bronze
Contact Finish — .000050 [.00127]
Gold or gold flash
Temperature Range —
-85° to 257°F [-65° to 125°C]
Current Rating — 3 amp max.
Termination Resistance (max) —
12 milliohms max.
Performance Characteristics
Dielectric Withstand Voltage —
750 Vac at sea level
Insulation Resistance —
5000 megohms minimum
Contact Insertion Force —
6 oz. [1.67 N] max. per contact
Durability — 500 cycles
Vibration — MIL-STD-1344 method
2005 Cond III (15G)
Physical Shock — MIL-STD-1344
method 2004 Cond G (100G)
Thermal Shock — MIL-STD-1344
method 1003 Cond A
Temperature Humidity —
MIL-STD-1344 method 1002 Type II
Technical Documents
Application spec. 114-25018
1-91
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
AMPMODU .100 [2.54]
Centerline Connectors per MIL-C-55302
Receptacle Assemblies, Single Row
Material and Finish
Housing — In accordance with
MIL-C-55302 or MIL-M-24519 type
GST-40F
Contacts — In accordance with
MIL-C-55302
Identification Marking
.015
.325
.325±±.015
0.38
[8.26
[8.26±±0.38
]]
Contact Position 1
.140 ± .015
[3..56 ± 0.38]
.065 ± .015
[1.65 ± 0.38]
No. of
Pos.
2
3
4
5
6
7
8
9
.075
[1.91]
.090
[2.29]
10
11
.065 ± .015
[1.65 ± 0.38]
± .005
.030
.030±.005
± 0.13
[0.76 ±0.13
] ]
Typ.
.100
[2.54] Typ.
A
Dimensions
A
.100
2.54
.200
5.08
.300
7.62
.400
10.16
.500
12.70
.600
15.24
.700
17.78
.800
20.32
.900
22.86
1.000
25.40
B
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.115
2.92
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.069
[1.75]
.002
.008
.008±±.002
0.05
[0.20
[0.20±±0.05
] ] B±.010
± .010
B[0.25]
Typ.
[± 0.25]
Board
Thickness
Military Part No
M55302/127-
AMP
Part No.
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.062
1.57
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
023B
102275-1
033B
102275-2
043B
102275-3
053B
102275-4
061B
87968-5
073B
102275-6
083B
102275-7
093B
102275-8
103B
102275-9
113B
1-102275-0
.265
[6.73]
.020
[0.51]
.031
[0.79]
Keying Plug —
Military Part Number
M55302/127-00KY
Part Number 102188-1
1-92
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
AMPMODU .100 [2.54]
Centerline Connectors per MIL-C-55302
Receptacle Assemblies, Single Row (Continued)
No. of
Pos.
21
2.000
50.80
13
15
16
17
18
19
22
23
24
25
26
2.500
27
2.600
66.04
28
29
30
31
32
33
34
35
36
37
.090
[2.29]
2.100
5.34
2.200
55.88
2.300
58.42
2.400
60.96
38
39
2.700
68.58
2.800
71.12
2.900
73.66
3.000
76.20
3.100
78.74
3.200
81.28
3.300
83.82
3.400
86.36
3.500
88.90
3.600
91.44
3.700
93.98
3.800
96.52
B
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.145
3.68
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.145
3.68
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
Board
Thickness
Military Part No
M55302/127-
AMP
Part No.
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.093
2.36
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.093
2.36
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
4.45
.125
3.18
.125
3.18
123B
1-102275-1
133B
1-102275-2
153B
1-102275-4
163B
1-102275-5
173B
1-102275-6
183B
1-102275-7
193B
1-102275-8
203B
1-102275-9
212B
2-87971-0
213B
2-102275-0
223B
2-102275-1
233B
2-102275-2
243B
2-102275-3
253B
2-102275-4
263B
2-102275-5
272B
2-87971-6
273B
2-102275-6
283B
2-102275-7
293B
2-102275-8
303B
2-102275-9
313B
3-102275-0
323B
3-102275-1
333B
3-102275-2
343B
3-102275-3
353B
3-102275-4
363B
3-102275-5
373B
3-102275-6
383B
3-102275-7
393B
3-102275-8
1
Printed Circuit Board Connectors
20
12
.075
[1.91]
Dimensions
A
1.100
27.94
1.200
30.48
1.400
35.56
1.500
38.10
1.600
40.64
1.700
43.18
1.800
45.72
1.900
48.26
.265
[6.73]
.020
[0.51]
.031
[0.79]
Keying Plug —
Military Part Number
M55302/127-00KY
Part Number 102188-1
1-93
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
AMPMODU .100 [2.54]
Centerline Connectors per MIL-C-55302
Receptacle Assemblies, Single Row (Continued)
No. of
Pos.
40
41
42
43
44
45
46
47
48
49
50
51
53
54
55
56
57
58
59
60
61
62
63
64
65
Dimensions
A
3.900
99.06
4.000
101.60
4.100
104.14
4.200
106.68
4.300
109.22
4.400
111.76
4.500
114.30
4.600
116.84
4.100
119.38
4.800
121.92
4.900
124.46
5.000
127.00
5.200
132.08
5.300
134.62
5.400
137.16
5.500
139.70
5.600
142.24
5.700
144.78
5.800
147.32
5.900
149.86
6.000
152.40
6.100
154.94
6.200
157.48
6.300
160.02
6.400
162.56
B
145
3.68
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
.175
4.45
Board
Thickness
Military Part No
M55302/127-
AMP
Part No.
.093
2.36
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
402B
3-87971-9
403B
3-102275-9
413B
4-102275-0
423B
4-102275-1
433B
4-102275-2
443B
4-102275-3
453B
4-102275-4
463B
4-102275-5
473B
4-102275-6
483B
4-102275-7
493B
4-102275-8
503B
4-102275-9
513B
5-102275-0
533B
5-102275-2
543B
5-102275-3
553B
5-102275-4
563B
5-102275-5
573B
5-102275-6
583B
5-102275-7
593B
5-102275-8
603B
5-102275-9
613B
6-102275-0
623B
6-102275-1
633B
6-102275-2
643B
6-102275-3
653B
6-102275-4
.075
[1.91]
.090
[2.29]
.265
[6.73]
.020
[0.51]
.031
[0.79]
Keying Plug —
Military Part Number
M55302/127-00KY
Part Number 102188-1
1-94
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
AMPMODU .100 [2.54]
Centerline Connectors per MIL-C-55302
Receptacle Assemblies, Double Row
Material and Finish
Identification Marking
Contact Position 1
1
Last Contact Position
Printed Circuit Board Connectors
Housing — In accordance with
MIL-C-55302 or MIL-M-24519 type
GST-40F
Contacts — In accordance with
MIL-C-55302
Plating Codes:
A — Gold flash over .000050 [0.00127]
min. nickel on entire contact, .000050
[0.00127] min. gold on contact area
B — .000050 [0.00127] min. gold over
.000050 [0.00127] min. nickel on the
entire contact
.325 ± .015
[8.26 ± 0.38]
.100
[2.54]
.238
[3.05]
± .015
.065
.065±.015
± 0.38
[1.65 ±0.38
] ]
±.015
± .015
.065
.065
± ±0.38
0.38]
[1.65
[1.65
.100
[2.54] Typ.
Housing Configuration 1
4
8
10
.500
12.70
14
.600
15.24
.700
17.78
18
.090
[2.29]
.265
[6.73]
.020
[0.51]
.031
[0.79]
.100
2.54
.300
7.62
.400
10.16
12
16
.075
[1.91]
Dimensions
A
B
20
.800
20.32
.900
22.86
22
1.000
25.40
24
1.100
27.94
26
1.200
30.48
Board
Thickness
.115
2.92
.145
3.68
.115
2.92
.115
2.92
.145
3.68
.115
2.92
.115
2.92
.115
2.92
.145
3.68
.115
2.92
.145
3.68
.115
2.92
.175
4.45
.115
2.92
.115
2.92
.145
3.68
.069
[1.75]
±.010
.030 ± .005
[0.76 ± 0.13]
Typ.
A
No. of
Pos.
.008 ± .002
[0.20 ± 0.05]
Typ.
.062
1.57
.093
2.36
.062
1.57
.062
1.57
.093
2.36
.062
1.57
.062
1.57
.062
1.57
.093
2.36
.062
1.57
.093
2.36
.062
1.57
.125
3.18
.062
1.57
.062
1.57
.093
2.36
± .010
BB[0.25]
[± 0.25]
Typical End View
Plating Code A
Military Part No
Part No.
M55302/128-
Plating Code B
Military Part No.
Part No.
M55302/128-
AA1A
87961-1
—
—
AC1C
87964-3
—
—
AD1A
87961-4
AD1B
87962-4
AE1A
87961-5
—
—
AE1C
87964-5
—
—
AF1A
87961-6
AF1B
87962-6
AG1A
87961-7
AG1B
87962-7
—
—
AH1B
87962-8
AH1C
87964-8
—
—
AJ1A
87961-9
AJ1B
87962-9
—
—
AJ1D
87965-9
AK1A
1-87961-0
AK1B
1-87962-0
AK1E
1-102277-0
—
—
AL1A
1-87961-1
AL1B
1-87962-1
AM1A
1-87961-2
AM1B
1-87962-2
AM1C
1-87964-2
—
—
Keying Plug —
Military Part Number
M55302/127-00KY
Part Number 102188-1
1-95
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
AMPMODU .100 [2.54]
Centerline Connectors per MIL-C-55302
Receptacle Assemblies, Double Row (Continued)
No. of
Pos.
28
1.300
33.02
30
1.400
35.56
32
1.500
38.10
34
36
38
40
42
44
46
48
50
1.800
45.72
1.900
48.26
2.000
50.80
2.100
53.34
2.200
55.88
2.300
58.42
2.400
60.96
54
2.600
66.04
2.700
68.58
2.800
71.12
58
60
.020
[0.51]
.031
[0.79]
1.700
43.18
2.500
63.50
56
.265
[6.73]
1.600
40.64
52
.075
[1.91]
.090
[2.29]
Dimensions
B
A
2.900
73.66
Board
Thickness
.115
2.92
.115
2.92
.145
3.68
.115
2.92
.115
2.92
.145
3.68
.175
4.45
.115
2.92
.145
3.68
.175
4.45
.115
2.92
.175
4.45
.115
2.92
.145
3.68
.115
2.92
.145
3.68
.115
2.92
.175
4.45
.115
2.92
.145
3.68
.115
2.92
.145
3.68
.115
2.92
.145
3.68
.175
4.45
.115
2.92
.145
3.68
.115
2.92
.115
2.92
.115
2.92
.115
2.92
.175
4.45
.062
1.57
.062
1.57
.093
2.36
.062
1.57
.062
1.57
.093
2.36
.125
3.18
.062
1.57
.093
2.36
.125
3.18
.062
1.57
.125
3.18
.062
1.57
.093
2.36
.062
1.57
.093
2.36
.062
1.57
.125
3.18
.062
1.57
.093
2.36
.062
1.57
.093
2.36
.062
1.57
.093
2.36
.125
3.18
.062
1.57
.093
2.36
.062
1.57
.062
1.57
.062
1.57
.062
1.57
.125
3.18
Plating Code A
Military Part No
Part No.
M55302/128-
Plating Code B
Military Part No.
Part No.
M55302/128-
AN1A
1-87961-3
AN1B
1-87962-3
AP1A
1-87961-4
AP1B
1-87962-4
AP1C
1-87964-4
—
—
AQ1A
1-87961-5
AQ1B
1-87962-5
—
—
AR1B
1-87962-6
AR1C
1-87964-6
—
—
AR1E
1-102277-6
—
—
BA1A
1-87961-7
BA1B
1-87962-7
BA1C
1-87964-7
BA1D
1-87965-7
BA1E
1-102277-7
—
—
BB1A
1-87961-8
BB1B
1-87962-8
—
—
—
—
BC1A
1-87961-9
BC1B
1-87962-9
BC1C
1-87964-9
—
—
BD1A
2-87961-0
BD1B
2-87962-0
BD1C
2-87964-0
—
—
—
—
BE1B
2-87962-1
—
—
BE1F
2-102278-1
BF1A
2-87961-2
BF1B
2-87962-2
BF1C
2-87964-2
—
—
BG1A
2-87961-3
—
—
BG1C
2-87964-3
—
—
BH1A
2-87961-4
BH1B
2-87962-4
BH1C
2-87964-4
—
—
BH1E
2-102277-4
—
—
BJ1A
2-87961-5
BJ1B
2-87962-5
BJ1C
2-87964-5
—
—
—
—
BK1B
2-87962-6
BL1A
2-87961-7
BL1B
2-87962-7
BM1A
2-87961-8
BM1B
2-87962-8
BN1A
2-87961-9
BN1B
2-87962-9
BN1E
2-102277-9
BN1F
2-102278-9
Keying Plug —
Military Part Number
M55302/127-00KY
Part Number 102188-1
1-96
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
AMPMODU .100 [2.54]
Centerline Connectors per MIL-C-55302
Receptacle Assemblies, Double Row (Continued)
No. of
Pos.
3.000
76.20
64
3.100
78.74
66
3.200
81.28
70
3.400
86.36
72
3.500
88.90
3.600
91.44
3.700
93.98
74
76
78
.265
[6.73]
.020
[0.51]
.031
[0.79]
3.800
96.52
80
3.900
99.06
86
4.200
106.68
88
4.300
109.22
90
4.400
111.76
96
4.700
119.38
98
4.800
121.92
100
4.900
124.46
5.200
132.08
5.300
134.62
5.400
137.16
106
.090
[2.29]
3.300
83.82
108
110
116
5.700
144.78
120
5.900
149.86
6.000
152.40
6.100
154.94
6.400
162.66
122
124
130
Board
Thickness
.115
2.92
.145
3.68
.115
2.92
.115
2.92
.175
4.45
.115
2.92
.145
3.68
.115
2.92
.145
3.68
.115
2.92
.115
2.92
.115
2.92
.115
2.92
.145
3.68
.115
2.92
.145
3.68
.115
2.92
.115
2.92
.145
3.68
.115
2.92
.175
4.45
.115
2.92
.115
2.92
.145
3.68
.115
2.92
.115
2.92
.115
2.92
.115
2.92
.115
2.92
.145
3.68
.115
2.92
.115
2.92
.115
2.92
.115
2.92
.062
1.57
.093
2.36
.062
1.57
.062
1.57
.125
3.18
.062
1.57
.093
2.36
.062
1.57
.093
2.36
.062
1.57
.062
1.57
.062
1.57
.062
1.57
.093
2.36
.062
1.57
.093
2.36
.062
1.57
.062
1.57
.093
2.36
.062
1.57
.125
3.18
.062
1.57
.062
1.57
.093
2.36
.062
1.57
.062
1.57
.062
1.57
.062
1.57
.062
1.57
.093
2.36
.062
1.57
.062
1.57
.062
1.57
.062
1.57
Plating Code A
Military Part No
Part No.
M55302/128-
Plating Code B
Military Part No.
Part No.
M55302/128-
—
—
BP1B
3-87962-0
—
—
BP1D
3-87965-0
—
—
BQ1B
3-87962-1
BR1A
3-87961-2
BR1B
3-87962-2
BR1E
3-102277-2
—
—
CA1A
3-87961-3
CA1B
3-87962-3
CA1C
3-87964-3
—
—
CB1A
3-87961-4
CB1B
3-87962-4
CB1C
3-87964-4
—
—
CC1A
3-87961-5
—
—
CD1A
3-87961-6
CD1B
3-87962-6
CE1A
3-87961-7
—
—
—
—
CF1B
3-87962-8
CF1C
3-87964-8
—
—
CG1A
3-87961-9
CG1B
3-87962-9
CG1C
3-87964-9
—
—
—
—
CK1B
4-87962-2
CL1A
4-87961-3
—
—
—
—
CL1D
4-87965-3
CM1A
4-87961-4
—
—
—
—
CM1F
4-102278-4
—
—
CQ1B
4-87962-7
CR1A
4-87961-8
—
—
CR1C
4-87964-8
—
—
DA1A
4-87961-9
DA1B
4-87962-9
DD1A
5-87961-2
—
—
DE1A
5-87961-3
—
—
DF1A
5-87961-4
—
—
DJ1A
5-87961-7
DJ1B
5-87962-7
DJ1C
5-87964-7
DJ1D
5-87965-7
—
—
DL1B
5-87962-9
DM1A
6-87961-0
DM1B
6-87962-0
DN1A
6-87961-1
—
—
DR1A
6-87961-4
DR1B
6-87962-4
1
Printed Circuit Board Connectors
62
68
.075
[1.91]
Dimensions
B
A
Keying Plug —
Military Part Number
M55302/127-00KY
Part Number 102188-1
1-97
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
AMPMODU .100 [2.54]
Centerline Connectors per MIL-C-55302
Special Double Row Receptacle Assemblies
Identification Marking
Last Contact Position
Contact Position 1
±.015
± .015
.325
.325
± ±0.38
0.38]
[8.26
[8.26
.050
[1.27]
Material and Finish
Housing — In accordance with
MIL-C-55302 or MIL-M-24519 type
GST-40F
Contacts — Per MIL-C-55302
Plating Codes:
A — Gold flash over .000050 [0.00127]
min. nickel on entire contact, .000050
[0.00127] min. gold on contact area
B — .000050 [0.00127] min. gold over
.000050 [0.00127] min. nickel on the
entire contact
.179
[4.55]
50
2.400
60.96
54
2.600
66.04
2.800
71.12
2.900
73.66
3.900
99.06
4.100
104.14
4.900
124.46
5.000
127.00
60
80
84
100
.075
[1.91]
.090
[2.29]
Dimensions
A
B
26
58
102
.069
[1.75]
.179
[4.55]
.100
[2.54] Typ.
A
1.000
25.40
1.200
30.48
22
.100
[2.54]
.238
[3.05]
.003
.144 +– .002
0.08
]
[366 +– 0.06
Dia.
Typ.
No. of
Pos.
.100
[2.54]
B
Board
Thickness
.115
2.92
.175
4.45
.115
2.92
.145
3.68
.115
2.92
.115
2.92
.115
2.92
.115
2.92
.115
2.92
.115
2.92
.115
2.92
.069
[1.75]
.002
.008
.008±±.002
± 0.05
[0.20
[0.20±0.05
]]
.062
1.57
.125
3.18
.062
1.57
.093
2.36
.062
1.57
.062
1.57
.062
1.57
.062
1.57
.062
1.57
.062
1.57
.062
1.57
Plating Code A
Military Part No
Part No.
M55302/128-
± .010
[± 0.25]
Plating Code B
Military Part No.
Part No.
M55302/128-
AK2A
1-102192-5
—
—
AM2E
1-102281-6
—
—
BH2A
1-102192-8
—
—
—
—
BH2D
1-102196-8
—
—
BK2B
1-102193-3
BM2A
1-102192-2
BM2B
1-102193-2
BN2A
1-102192-4
—
—
CG2A
1-102192-9
—
—
—
—
CJ2B
1-102193-1
DA2A
1-102192-0
DA2B
1-102193-0
—
—
DB2B
1-102193-7
.265
[6.73]
.020
[0.51]
.031
[0.79]
Keying Plug —
Military Part Number
M55302/127-00KY
Part Number 102188-1
1-98
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
AMP-BLADE Two-Piece
Printed Circuit Edge Connectors
Introduction
Product Facts
1
AMP-BLADE II Connectors
Selective gold plating for
economy with high
performance
■
Glass-filled polyester
housing
Printed Circuit Board Connectors
■
AMP-BLADE and Military
Connectors
■
Full gold plating
■
Diallyl phthalate housing
rated from -85°F to 257°F
[-65°C to 125°C]
■
5 amps per contact
■
Recognized under the
Component Program of
Underwriters
Laboratories Inc.
File No. E28476
R
Various technical documents are available for your use:
Product Specifications describe
technical performance characteristics
and verification tests. They are intended
for the Design, Component and Quality
Engineer.
108-9004 Diallyl Phthalate
108-9009 Phenolic
108-9201 Contact Crimp
Instruction Sheets provide instructions for assembling or applying the
product. They are intended for the
Manufacturing Assembler or Operator.
Instructional material covering operation, setup, maintenance, repair, etc. is
included with each machine, tool or die
set. If this material is required prior to
receiving your tooling, contact Technical
Support for the applicable document.
Electrical Characteristics
Contact Rating — 5 amps
Operating Temperature —
-85° to 257°F [-65° to 125°C]
(Military)
For applications requiring
the highest level of conductivity and reliability,
AMP-BLADE Two-Piece
Printed Circuit Edge
Connectors meet all applicable performance requirements of MIL-C-21097.
The blade and receptacle
design provides multiple
areas of contact for
maximum conductivity.
Gold-over-nickel plating
in mating areas of the contacts prevents metal migration and oxide build-up
for additional reliability.
Controlled insertion and
extraction forces permit
easy mating and unmating
of connector assemblies.
A guide system helps
prevent contact damage
and provides positive alignment for reliable mating of
connector halves.
The receptacle half of
this two-piece connector
accepts a variety of contact
designs, but requires only
that number of contacts
which fulfills circuitry needs.
Crimp snap-in contacts are
available in loose-piece or,
to further reduce installed
costs, in strip form for
application by high-speed,
automatic compressioncrimping equipment.
Post-type contacts are
specifically designed for
wiring TE Connectivity
TERMI-POINT clips and
tools. The connectors
with post-type contacts
also adapt to wrap-type
terminations.
The split eyelet contact
simplifies bus wiring by
permitting wire to be easily
snapped into the contact
notch for soldering. Each
contact accepts up to two
18 AWG [0.8 to 0.9 mm2]
stranded or 16 AWG [1.25
to 1.4 mm2] solid wires.
High reliability, versatility
and speed of assembly
are features which recommend the AMP-BLADE
Two-Piece Printed Circuit
Edge Connectors for dense
wiring in applications where
rugged serviceability is a
prime consideration.
Construction
Contact Material — Phosphor
bronze per QQ-B-750
Contact Plating —
Gold plate — MIL-G-45204;
Nickel plate — QQ-N-290 (thickness
as specified); Tin-lead per MIL-T-10727,
Type 1, on solder tails
Contact Identification —
Cavities identified on both faces of
receptacle block
Performance
This connector meets performance
requirements of MIL-C-21097
Altitude
Sea level
50,000 feet
[15,240 m]
70,000 feet
[21,336 m]
Test
Voltage
(AC RMS)
1,800 VAC
700 VAC
500 VAC
Individual-Contact Engaging and
Separating Forces —
2 ounces to 16 ounces [0.6 N to 4.5 N]
Contact Resistance —
25 millivolts maximum at 5 amps
Vibration Tolerance —
10 to 2,000 hz. @ 15Gs per method
204B of MIL STD 202
Durability —
Gold
Thickness
.000015
0.00038
.000030
0.00076
.000050
0.00127
Cycles
100
250
500
1-99
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
AMP-BLADE Two-Piece
Printed Circuit Edge Connectors
AMP-BLADE Connector for Snap-In Receptacle Contacts
Crimp, Snap-In Receptacle
Contacts
Materials
Contact — Phosphor bronze
1 Finish — Selective gold plating in
contact mating area over .000030
[0.00076] nickel, see table for gold
thicknesses; tin-lead in wire barrel
2 Finish — RoHS Part Numbers are
same as above except for tin in wire
barrel
Solder—Tab
Receptacle Contacts
Wire
(Insulation)
Ranges
Gold Plate
Thickness
24-20 AWG
0.2-0.5 mm2
040-.080
1.02-2.03
28-24 AWG
0.09-0.2 mm2
.030-.060
0.76-1.52
1: 18 AWG
0.8-0.9 mm2
or
2: 20 or 22 AWG
0.3-0.6 mm2
.067-.090
1.70-2.28
.000030
0.00076
.000050
0.00127
(
)
(
)
(
)
Side Feed Contact Part Number
Loose Piece*
Strip Form
531586-31
5-531586-32
531586-61
5-531586-62
531586-4
—
.000030
0.00076
531587-3
531587-6
.000015
0.00038
—
—
.000030
0.00076
531589-31
5-531589-32
531589-6
*See page 1-109 for crimping tool.
Wire Range
AWG
mm2
Insulation
Range
24-20
0.2-0.6
28-24
0.08-0.2
(2)20
or
(2)22
0.183
or
0.643
18
0.8
28-24
0.08-0.2
.040-.080
1.02-2.03
.030-.060
0.76-1.52
(2).045
to
(2)1.14
(2).072
to
(2)1.83
.067-.090
1.70-2.29
.078
1.98
Commercial Type
End Feed Loose Piece
Strip
Part No.
Part No.
.000030 [0.00076] Gold Over
.000030 [0.00076] Nickel
66005-2
66010-2
21097/16-03
66005-3
66010-3
—
66011-2
21097/16-01
66009-3
66011-3
66021-2
66026-2
21097/16-04
66021-3
66026-3
66021-2
66026-2
21097/16-04
66021-3
66026-3
66027-2
—
21097/16-02
66027-3
—
Materials
Contact — Phosphor bronze
Type
.121
[3.07]
.060
[1.52]
A
.050
[1.27]
.060
[1.52]
A
Post-Type Receptacle
Contacts
Materials
Contact — Phosphor bronze
1 Finish — Selective gold plating in
contact mating area over .000030
[0.00076] nickel (see table for gold
thicknesses); posts, tin plated
2 Finish — RoHS Part Numbers have
same finish as above except for tin on
posts
Military Type
End Feed Loose Piece
Strip
Part No.
Part No.
.000050 [0.00127] Gold Over
.000030 [0.00076] Nickel
Military
Part No.
B
Maximum Extension
Beyond Back
Face of Block
Part Numbers—Loose Piece
Commercial Type
Gold Plate Thickness
.000030 [0.00076]
over .000030 [0.00076] Nickel
.390
9.91
.375
9.52
66086-2
66086-4
B
Dimensions
A
B*
.410
10.41
.640
16.26
.810
20.57
1.040
26.42
.370
9.40
.600
15.24
.770
19.56
1.000
25.4
Gold Plate
Thickness
Part Numbers - Loose Piece
.045 x .045 [1.14 x 1.14] Posts
.000030
0.00076
.000030
0.00076
.000030
0.00076
.000030
0.00076
1-582364-11
6-582364-12
1-582364-21
1-582364-31
1-582364-41
*Post length after inserted into housing.
1-100
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
AMP-BLADE Two-Piece
Printed Circuit Edge Connectors
Board Half Housing Pre-loaded with Blade Type Contacts
Housing without
Mounting Holes
1
Printed Circuit Board Connectors
Materials
Housing — Diallyl phthalate
Blade Contact — Gilding material
Finish — Selective gold plating in
contact mating area over .000030
[0.00076] min. nickel. See table for gold
thicknesses
No. of
Positions
A
(Max.)
17
2.070
52.58
23
2.670
67.80
35
41
47
Printed Circuit
Board
Thickness
3.870
98.30
4.470
113.54
5.070
128.80
.125
3.18
.063
1.59
.094
2.38
.125
3.18
.063
1.59
.094
2.38
.063
1.59
.094
2.38
.063
1.59
.125
3.18
Military Type CS
Diallyl Phthalate Housing
Military Part No.
Gold Plating Thickness
Part No.
.000050 [0.00127]
21097/15-03
—
21097/15-04
582843-9
21097/15-05
2-582843-0
21097/15-06
3-582843-2
21097/15-10
1-582843-1
21097/15-11
2-582843-2
21097/15-13
1-582843-2
21097/15-14
2-582843-3
21097/15-16
1-582843-3
21097/15-18
3-582843-6
Notes:
1. AMP-BLADE contacts (gold plated) are molded into housing in predetermined positions to mate with receptacle housing.
2. Connectors can be furnished with the two middle rows of lines removed to fit existing board hole patterns.
1-101
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
AMP-BLADE Two-Piece
Printed Circuit Edge Connectors
Board Half Housing Pre-loaded with Blade Type Contacts (Continued)
Housing with
Mounting Holes
Materials
Housing — Diallyl phthalate
Blade Contact — Gilding metal
3 Finish — Selective gold plating in
contact mating area over .000030
[0.00076] min. nickel. See table for gold
thicknesses. Gold flash on tails (2 rows)
and tin-lead on remaining tails.
4 Finish — RoHS Part Numbers are
same as above except for tin on
remaining tails
No. of
Positions
17
23
29
35
41
47
A
(Max.)
2.390
60.70
2.990
54.10
3.590
91.19
4.190
106.43
4.790
121.67
5.623
142.82
B
2.130
54.10
2.730
69.34
3.330
84.58
3.930
99.82
4.530
115.06
5.363
136.22
C
Printed Circuit
Board
Thickness
.265
6.73
.265
6.73
.265
6.73
.265
6.73
.265
6.73
.381
9.68
.063
1.59
.094
2.38
.125
3.18
.063
1.59
.094
2.38
.125
3.18
.063
1.59
.094
2.38
.063
1.59
.094
2.38
.125
3.18
.063
1.59
.094
2.38
.125
3.18
.063
1.59
.094
2.38
.125
4.65
Commercial Type
Diallyl Phthalate Housing
Gold Plate Thickness
.000015 [0.00030]
.000030 [0.00076]
Military Type CS
Diallyl Phthalate Housing
Military Part No.
Gold Plating Thickness
Part No.
.000050 [0.00127]
1-582390-13
3-582152-13
3-5582152-14
21097/14-01
582843-2
—
—
21097/14-02
1-582843-4
—
—
21097/14-03
2-582843-5
—
3-582152-23
3-5582152-24
21097/14-04
582843-3
—
—
21097/14-05
582843-1
—
—
21097/14-06
2-582843-6
1-582390-33
1-5582390-34
3-582152-33
3-5582152-34
21097/14-07
582843-4
2-582390-33
2-5582390-34
1-582390-43
1-5582390-44
2-582390-43
2-5582390-44
—
21097/14-08
1-582843-5
3-582152-43
3-5582152-44
6-582152-43
6-5582152-44
21097/14-10
582843-5
21097/14-11
1-582843-6
21097/14-12
2-582843-8
21097/14-13
582843-6
21097/14-14
1-582843-7
—
—
—
1-582390-53
—
3-582152-53
3-5582152-54
6-582152-53
6-5582152-54
3-582390-53
3-5582390-54
9-582152-53
—
—
3-582308-13
3-5582308-14
21097/14-16
582843-7
2-582390-63
2-5582390-64
6-582308-13
21097/14-17
1-582843-8
3-582390-63
—
21097/14-18
3-582843-0
Notes:
1. AMP-BLADE contacts (gold plated) are molded into housing in predetermined positions to mate with receptacle housing.
2. Connectors can be furnished with the two middle rows of lines removed to fit existing board hole patterns.
1-102
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
AMP-BLADE Two-Piece
Printed Circuit Edge Connectors
Wire-Half Assemblies and Housings
Pre-loaded Assemblies
for Crimp Contacts,
TERMI-POINT Clip or
Wrap-Type Post Contacts,
Solder/Weld Contacts
L
4
6
8
42
44
Printed Circuit Board Connectors
.125
Ref.
[3.18]
2
1
.125
[3.18]
.142
[3.61]
M
46
.400
[10.16]
Materials
1
.132
[3.35] .125
[3.18] N
Housing — Diallyl phthalate glassfilled polyester, green
Contact — Phosphor bronze
Posts — Brass, tin plated
3
5
7
.100
[2.54]
41
43
45
47
.278
[7.06]
.130
Dia.
[3.30]
2 Places
.075
[1.90]
.090
[2.29]
.200
[5.08]
.450
[11.43]
.745
[18.92]
Receptacle Housing
L
.125
[3.18]
.142
[3.61]
M
Material
.125
Ref.
[3.18]
Diallyl phthalate
2
4
6
8
42
44
46
.400
[10.16]
.132
[3.35] .125
[3.18] N
.140
Dia.
[3.56]
2 Places
1
3
7
.100
[2.54]
.425
[10.80]
CL
5
41
43
45
.090
[2.29]
47
.075
[1.90]
.200
[5.08]
CL
.054
[1.37]
.450
[11.43]
.745
[18.92]
P
.278
[7.06]
.130
Dia.
[3.30]
2 Places
M
Recommended Panel Cutout
No.
of
Pos.
No. of
Post Length
Clip or
in.
mm
Wrap Type
Terminations
17
.370
9.40
1
23
.770
19.65
3
1.000
.770
.370
1.000
.770
.600
.370
.770
.600
.370
1.000
.770
.600
.370
25.40
19.65
9.40
25.40
19.65
15.24
9.40
19.65
15.24
9.40
25.40
19.65
15.24
9.40
4
3
1
4
3
2
1
3
2
1
4
3
2
1
29
35
41
47
L
Dimensions
M
N
Diallyl Phthalate
Preloaded Housing Part No.
Housings for Crimp or
Cutout
Eyelet Type Contact
Dim. for .031 x .062 [0.79 x 1.57] Post
Mounting
Gold Plate Thickness
Commercial Military Type CR-Receptacle
P
.000030
Type
Military
Part No.
[0.00076]
Part No.
Part No.
2.390
60.71
2.990
75.95
2.130
54.10
2.730
69.34
.265
6.73
.265
6.73
1.910
48.51
2.510
63.75
582828-4
3-582151-1
21097/13-01 5-582151-1
—
3-582151-2
21097/13-02 5-582151-2
3.590
91.19
3.330
84.58
.265
6.73
3.110
78.99
3-582151-3
21097/13-03 5-582151-3
4.190
106.43
3.930
99.82
.265
6.73
3.710
94.23
3-582151-4
21097/13-04 5-582151-4
4.790 4.530 .265
121.67 115.06 6.73
4.310
109.47
3-582151-5
21097/13-05 5-582151-5
5.623 5.363 .381
142.82 136.22 9.68
5.143
130.63
582830-1
582830-2
—
582831-1
—
—
582831-4
—
—
582832-4
582819-1
582819-2
—
—
3-582307-1
21097/13-06 5-582307-1
1-103
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
AMP-BLADE Two-Piece
Printed Circuit Edge Connectors
Receptacle Housings for Crimp Snap-in Contacts
Material
L
Glass-filled polyester, green
.125
[3.18]
M
.142
[3.61]
.125
Ref.
[3.18]
Related Product Data
Contact Part Numbers —
page 1-103
2
.132
[3.35] .125
[3.18]
1
4
3
6
5
8
7
.100
[2.54]
N
42
41
44
43
46
45
.400
[10.16]
47
.278
[7.06]
.075
[1.90]
.090
[2.29]
.130
Dia.
[3.30]
2 Places
.200
[5.08]
.450
[11.43]
.745
[18.92]
.140
Dia.
[3.56]
2 Places
.425
[10.80]
CL
CL
.054
[1.37]
P
M
Recommended Panel Cutout
No. of
Pos.
17
23
29
35
41
47
L
M
2.390
60.71
2.990
75.95
3.590
91.19
4.190
106.43
4.790
121.67
5.623
142.82
2.130
54.10
2.730
69.34
3.330
84.58
3.930
99.82
4.530
115.06
5.363
136.22
Dimensions
N
.265
6.73
.265
6.73
.265
6.73
.265
6.73
.265
6.73
.381
9.68
P
1.910
48.51
2.510
63.75
3.110
78.99
3.710
94.23
4.310
109.47
5.143
130.63
AMP
Part
Number
531590-1
531590-2
531590-3
531590-4
531590-5
531590-6
1-104
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
AMP-BLADE Two-Piece
Printed Circuit Edge Connectors
AMP-BLADE Connector Keying
Keying Plugs
1
Printed Circuit Board Connectors
Keying Plug — Nylon
Remove blade contact
for keying
Part Number 1-582156-9
Military Part Number 21097/11-07
Keying plug inserted
Keying of the connector can be achieved by plugging receptacle cavities. Insert keying plug into mating side of
receptacle housing cavity. Remove corresponding blade contact from blade housing using tool number 811145.
Printed Circuit Board Layout
No.
of
Pos.
17
23
29
35
41
47
A
Dimensions
A
B
2.130
54.10
2.730
69.34
3.330
84.58
3.930
99.82
4.530
115.06
5.363
136.22
.097–.103
[2.46–2.62]
.265
6.73
.265
6.73
.265
6.73
.265
6.73
.265
6.73
.381
9.68
.197–.203
[5.00–5.16]
B
.050–.054
Dia.
[1.27–1.37]
B
.097–.103
[2.46–2.62]
.130
Dia.
[3.30]
2 Places
.197–.203
[5.00–5.16]
.297–.303
[7.54–7.70]
.350
Min.
[8.89]
.181
[4.60]
.250
[6.35]
Min.
.120
[3.05]
Min.
Cutout for Keying Box
Located where needed (optional)
Note: If existing printed circuit board layout does not include the two middle rows of holes, TE Connectivity can supply the connector with the middle rows of tines removed.
1-105
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
AMP-BLADE Two-Piece
Printed Circuit Edge Connectors
Application Tooling
AMP-O-LECTRIC
Machine
Substantial savings and the
benefits of mass production
are obtained with the
AMP-BLADE Printed Circuit
Connector through the use
of AMP automatic machines.
The AMP-BLADE receptacle
contacts are available in
strip form for this use
(see table on AMP-BLADE
receptacle contacts) and
can be terminated to wire
leads at rates up to 1500
per hour, depending on
operator skill. Contact
TE Connectivity for complete specifications and
part numbers.
Extraction Tool
Hand Crimping Tools
Receptacle Contact
Extraction Tool
Part Number 465199-1
Military Part Number M21097/18-01
Hand Tool
Part Number
91555-1
59524-1
59525-1
90005-1
Loose-Piece
Receptacle
Contact
Part Number
66010
531586
66010
66010
66011
531587
66026
531589
66026
531589
Wire
Combinations
One 24, one 22
or one 20
Two 24 or two 22
One 22 or one 20
One 26 or one 24
One 28, one 26 or one 24
Two 22 or two 20
Two 20, one 18 or one 20
Two 22 or three 22
1-106
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Table of Contents
RF Connectors
Military Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4
N Series Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5, 2-6
BNC Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7, 2-8
TNC Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9, 2-10
SMA Connectors
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11 to 2-13
For Flexible Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14 to 2-20
Panel Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21
For Semi-Rigid Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22 to 2-25
Printed Circuit Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-26
In-Series Adapters MIL-A-55339 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-26
SMA Receptacles MIL-C-83517
Panel Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-27 to 2-29
Surface Launch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-30
End Launch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-31
Field Replaceable Launchers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-32
Between Series Adapters for Semi-Rigid and Flexible Cable . . . . . . . . . . . . . . 2-33, 2-34
Threaded Connectors
OSMM Microminiature Connectors
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-62,
For Flexible and Semi-Rigid Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SSMA Subminiature Connectors
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-65 to
For Semi-Rigid Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
For Flexible Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Panel Mount Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bulkhead Mount Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Panel Mount Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printed Circuit Boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Microstrip Transmission Line Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hermetically Sealed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-72,
In-Series Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
High Frequency for Semi-Rigid Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RF Connectors
Push-On Coaxial Connectors
SMPM Microminiature Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-35,
Multi-position Backplane RF Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-37,
SMP Microminiature Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-39 to
Between Series Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OSSP Subminiature Modular Blind Mate Connectors . . . . . . . . . . . . . . . . . . 2-44 to
OSP (BMA) Miniature Modular Blind Mate Connectors . . . . . . . . . . . . . . . . . 2-50 to
2
2-46
2-38
2-43
2-43
2-43
2-49
2-61
2-63
2-64
2-67
2-68
2-69
2-70
2-70
2-71
2-71
2-71
2-73
2-74
2-75
2-1
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Coaxial Cable Termination
One-Step BNC/TNC Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-76 to 2-81
Application Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-82 to 2-87
Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-88 to 2-92
Cheminax Coaxial Cables Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-92
Nanonics Coaxial Connectors
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-93
Typical VSWR and Insertion Loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-94
50 Ohm Coax Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-95
Part Numbering Guideline for 50 Ohm Coax Connectors . . . . . . . . . . . . . . . . . . . . . .2-96
Horizontal SMT 50 Ohm Coax Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-97
Part Numbering Guideline for Horizontal SMT 50 Ohm Coax Connectors . . . . . . . . .2-98
50 Ohm Coax with Mixed Signal Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-99
Part Numbering Guideline for 50 Ohm Coax with Mixed Signal Connectors . . . . . . .2-100
Part Number Index Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-101
MICRODOT Coaxial Connectors
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-102
Standard Connectors
Performance Data Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-103
Screw-On Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-104 to 2-109
Slide-On Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-110 to 2-113
Quick-Connect Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-114 to 2-116
Twinax Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-117
Triax Series and Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-118
Module Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-119
Caps for Screw-On Series, Receptacle Hoods . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-120
Feed Thru Adapters for Screw-On Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-121
BNC and TNC Adapters for Screw-On, Slide-On,
Quick-Connect Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-121, 2-122
Gold Plated Crimp Style Coaxial Connector Series
Performance Data Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-123
Screw-On Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-124 to 2-127
Assembly Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-127
LEPRA/CON Ultra-Miniature Connectors
Performance Data Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-128
Screw-On Series — Standard Interface . . . . . . . . . . . . . . . . . . . . . . . . . . .2-129, 2-130
Screw-On Series — Locking Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-131, 2-132
Slide-On Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-133, 2-134
Assembly Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-134
BNC / LEPRA/CON Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-135, 2-136
Snap-Lock Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-137
Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-138, 2-139
Cable Acceptance Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-140 to 2-145
Hermetic Connectors
Coaxial Screw-On, Slide-On Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-146, 2-147
2-2
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Appendix
A - Theory and Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-148 to 2-153
B - Typical Coaxial Cable Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .2-154 to 2-156
C - Maximum Power Handling Capabilities for Cables . . . . . . . . . . . . . . . . . . . . . . . .2-157
D - Nominal Loss Characteristics for Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-158
2
RF Connectors
2-3
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Military Specifications
MIL-PRF-39012
■
Defines the general requirements and tests for radio
frequency (RF) connectors
used with flexible RF cables
and certain other types of
coaxial transmission lines.
It includes the following
series of connectors in this
catalog: N, BNC, TNC, SMA
MIL-C-55339
■
Defines the performance
requirements and tests for
between series and within
series, RF coaxial connector adapters. The In-Series
Adapters are shown in this
catalog
MIL-C-83517
■
Defines the general
requirements and test for
RF connectors used with
coaxial, strip, or microstrip
transmission line devices.
It includes the SMA
Receptacles as shown in
this catalog
Definition of Categories for MIL-PRF-39012
Category A — Flexible Cable
Field serviceable, no special tools required
to assemble. Standard wrenches, soldering
equipment, pliers, etc., are not defined as
special tools. Captured center contact.
Category B — Flexible & Semi-Rigid Cable
Non-field replaceable, special tools may be
required. These connectors may be used for
original installations. Field replacement is
intended to be made by Category A or C
Connectors. Will not be stocked or procured
by the Government. Captured and noncaptured center contacts.
Category C — Flexible Cable
Field replaceable. Requires crimp tool and
specified cable stripping dimensions.
Captured center contact. Recommended
crimp tool kit: Part Number 1055236-1.
Category D — Flexible Cable
Field replaceable. Requires crimp tool for
center contact and outer ferrule; specified
cable stripping dimensions (same as
Category C) and defined piece parts.
Captured center contact. Recommended
crimp tool kit: Part Number 1055236-1.
Category E — Semi-Rigid Cable
Field replaceable. Requires specified cable
stripping dimensions. Captured and noncaptured center contact. Uses standard tool
kit: Part Number 1055420-1.
Category F — Semi-Rigid Cable
Field replaceable. Requires crimp tool and
specified cable stripping dimensions.
Captured center contact. Recommended
crimp tool kit: Part Number 1055835-1.
2-4
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
N Series Connectors (MIL-PRF-39012)
Product Facts
■ Dual
“O” Crimp connectors
are MIL-PRF-39012, Class II,
Category B qualified
COTS equivalent parts
available
■
Captive center contacts
■
Completely crimpable
application – one hand tool
crimps all cables with
single or double braided
shields of a given size
■
Impedance matching crimps
■
Broad band performance –
low VSWR
■
Superior cable retention
■
PTFE dielectric
This connector offers the
added benefits of low
overall applied cost with a
labor-saving two-crimp
assembly. The contact is
simply crimped to the cable’s
center conductor, then both
braid and cable support are
simultaneously crimped to
complete the termination.
N Series Connectors are
available in standard plug,
jack, bulkhead jack and
right-angle plug configurations.
Materials
Brass — QQ-B-626
Beryllium Copper — QQ-C-530
Dielectric — PTFE
PTFE— MIL-P-19468
Copper, Annealed — QQ-C-576
Phosphor Bronze — QQ-B-750
Silicone Rubber — ZZ-R-765
Plating
Body —
Silver per QQ-S-365
Center Contact —
Gold per ASTM B488, type 3, grade C
2
RF Connectors
■
The TE Connectivity N Series
Connector, featuring a
.625 [15.88] - 24 threaded
coupling for optimum stability,
is highly suited for critical
applications and environments. This medium sized
connector can withstand
shock and vibration for a
low noise level and has a
constant impedance of
50 ohms. It also features a
captive center contact and
provides excellent performance at frequencies up to
11 GHz, with voltages to
1000 volts rms.
Electrical Characteristics
Mechanical Characteristics
Nominal Impedance — 50 ohms
Working Voltage — 1000 volts, rms
at sea level
Frequency Range — 0 to 11 GHz
Voltage Standing Wave Ratio
(VSWR) — Straight Plug or Jack1.3:1 max.
Right-Angle Plug —
1.35 max. at 0 to 9.0 GHz
1.50 max. at 9.0 to 11.0 GHz
Contact Resistance —
Outer Contact — 0.2 milliohms
Center Contact — 1.0 milliohms
Right-Angle — 2.5 milliohms
Insulation Resistance —
5000 megohms min.
Dielectric Withstanding Voltage —
2500 Volts, rms at sea level
RF Leakage — -90 dB min. at 2 to
3 GHz
RF Insertion Loss — 0.15 dB max. at
10 GHz; Right-Angle Plug, 0.3 dB max.
at 10 GHz
Corona Level — 500 volts min. at
21 336 m [70,000 ft.]
Mating/Unmating — Threaded coupling
Cable Attachment — Crimp type center contact and braid
Coupling Nut Retention — 445 N
[100 lbs.] min.
Cable Retention — 400 N [90 lbs.]
min. RG 214/U Cable
Durability — 500 cycles per MIL-PRF39012
Captive Contact — 27 N [6 lbs.] min.
axial retention, either direction
Environmental Characteristics
Temperature Range —
-85°F to +329°F [-65°C to +165°C]
Vibration — MIL-STD-202, Method
204, Test Cond. B
Shock — MIL-STD-202, Method 213,
Test Cond. I
Moisture Resistance — MIL-STD202 Method 106
Salt Spray — MIL-STD-202, Method
101, Test Cond B
Temperature Cycling — MIL-STD202, Method 107, Test Cond. B
(except high temperature is +85°C)
Note: All data pertains to use with
MIL-PRF-39012 specified cables only.
Termination Tooling
Integral Die —
Hand Tool Part Number 220015-1
2-5
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
N Series Connectors (MIL-PRF-39012) (Continued)
Plugs
MIL-PRF-39012/01
.750 Dia.
[19.05] Max.
Plugs
L
Max.
Jacks
MIL-PRF-39012/02
TE Part No.
Reference
Part No.
Military PN
M39012/01
Notes
Termination
Style
Body Plating
Dim L
RG/U Cable
225092-7
—
B0012
Weatherproof
Crimp
Silver
1.859 [47.22]
225
1-225092-1
—
—
Weatherproof
Crimp
Silver
1.859 [47.22]
393
51692-4
—
B0013
Crimp
Silver
1.687 [42.85]
11, 11A, 216
225392-2
—
—
Crimp
Silver
1.687 [42.85]
142, 142A, 142B, 400
225361-4
—
—
Crimp
Silver
1.687 [42.85]
142, 142A, 142B, 400
225361-2
—
—
Crimp
Silver
1.687 [42.85]
223, 55, 55A, 55B
225361-1
—
—
Crimp
Silver
1.687 [42.85]
58, 58A, 58B, 58C
1-225661-2
—
—
225092-2
—
B0007
51692-2
—
225661-2
Weatherproof
Crimp
Nickel
1.687 [42.85]
58, 58A, 58B, 58C
Crimp
Silver
1.859 [47.22]
8, 8A, 213
B0007
Crimp
Silver
1.687 [42.85]
8, 8A, 213
—
—
Crimp
Nickel
1.687 [42.85]
8, 8A, 213
225092-1
—
B0008
Crimp
Silver
1.859 [47.22]
9, 9A, 9B, 214
51692-1
—
B0008
Crimp
Silver
1.687 [42.85]
9, 9A, 9B, 214
225661-1
—
—
Crimp
Nickel
1.687 [42.85]
9, 9A, 9B, 214
1057088-1
3001-7941-00
—
Solder
Passivate / Gold
0.970 [24.60]
402 semirigid (.141 dia)
1057094-1
3001-7985-00
—
Solder
Passivate / Gold
0.970 [24.60]
405 semirigid (.086 dia)
TE Part No.
Reference
Part No.
Military PN
M39012/02
Termination
Style
Body Plating
Dim L
RG/U Cable
225093-2
—
B0008
Crimp
Silver
1.937 [49.19]
8, 8A, 213
225664-2
—
—
Crimp
Nickel
1.937 [49.19]
8, 8A, 213
225093-7
—
—
Crimp
Silver
1.937 [49.19]
225
1057116-1
3002-7941-00
—
Solder
Passivate / Gold
1.050 [26.70]
402 semirigid (.141 dia)
RG/U Cable
Weatherproof
Weatherproof
Jacks
.627 Dia.
[15.93] Max.
1.937
LL
Max.
[49.19]
Max.
Notes
Weatherproof
Bulkhead Jacks
Bulkhead Jacks
MIL-PRF-39012/03
.885 Dia.
[22.48] Max.
LL
2.125
Max.
[53.98]
Max.
TE Part No.
Reference
Part No.
Military PN
M39012/03
Notes
Termination
Style
Body Plating
Dim L
225094-2
—
B0004
Weatherproof
Crimp
Silver
2.125 [53.98]
8, 8A, 213
225094-1
—
B0005
Weatherproof
Crimp
Silver
2.125 [53.98]
9, 9A, 9B, 214
Weatherproof
1-225668-1
—
—
1057140-1
3004-7388-10
—
1057138-1
3004-7341-10
—
Clamp
Nickel
1057159-1
3004-7941-00
—
Solder
Passivate / Gold
1.335 [33.90]
402 semirigid (.141 dia)
1058628-1
3604-7841-02
—
Solder
Passivate / Gold
1.125 [28.60]
402 semirigid (.141 dia)
1057165-1
3004-7985-00
—
Solder
Passivate / Gold
1.335 [33.90]
405 semirigid (.086 dia)
18 GHz
Crimp
Nickel
2.125 [53.98]
393
Clamp
Nickel
1.125 [28.60]
174, 179, 187, 188, 316
1.125 [28.60] 55, 58, 141, 142, 223, 303
Flange Mount Cable Jacks
Right-Angle Plugs
MIL-PRF-39012/05
35.86 Max.
[1.412]
21.01 Dia.
[.827] Max.
TE Part No.
Reference Part No.
Termination Style
Body Plating
Dim L
RG/U Cable
1057176-1
3006-7941-00
Solder
Passivate / Gold
1.000 [25.40]
402 semirigid (.141 dia)
1057178-1
3006-7985-00
Solder
Passivate / Gold
1.000 [25.40]
405 semirigid (.086 dia)
Right Angle Plugs
L
Max.
TE Part No.
Reference
Part No.
Military PN
M39012/05
Termination
Style
225014-2
—
B0002
Body Plating
Dim L
Crimp
Silver
2.275 [57.79]
225389-2
—
B0002
8, 8A, 213
Crimp
Silver
2.453 [62.31]
8, 8A, 213
225669-2
—
225014-3
—
—
Crimp
Nickel
2.275 [57.79]
8, 8A, 213
B0003
Crimp
Silver
2.275 [57.79]
9, 9A, 9B, 214
225389-6
—
—
225389-3
—
—
Weatherproof
Crimp
Silver
2.453 [62.31]
393
Weatherproof
Crimp
Silver
2.453 [62.31]
225
Notes
Weatherproof
RG/U Cable
Panel Mount Receptacles
TE Part No.
Reference Part No.
Interface
1057275-1
3051-0000-10
Plug
Termination Style
solder cup
1057284-1
3052-0000-10
Jack
solder cup
1057279-1
3051-1201-10
Plug
straight post
1057290-1
3052-1201-10
Jack
straight post
1057293-1
3052-1648-10
Jack
contact tab
2-6
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
BNC Connectors (MIL-PRF-39012)
Product Facts
■
■
■
■
■
Related Product Data
Performance Specifications —
See chart below
Material Specifications —
See chart below
Military Category — All MIL type
“O” crimp connectors are Category B
Type (TE Connectivity Crimp Tooling),
unless otherwise noted.
Packaging — All connectors are
packaged individually.
Available in 50 ohm versions, these connectors
feature numerous styles
including cable plugs and
jacks. These connectors
accept a wide range of
coaxial cables and are
intermateable with industry
standard connectors
designed to MIL-PRF-39012
specifications.
Category B
“O” Crimp (MIL Type)
Characteristics
Electrical
Impedance, Nom. (Ohms)
Working Voltage (Volts RMS)
Contact Resistance
(Milliohms)
Initial Insulation Resistance (Megohms)
Dielectric Withstanding Voltage (VAC)
Corona Level at 70,000 ft. (Volts, RMS)
RF Leakage, Max. (dB)
RF Insertion Loss, Max. (dB)
Frequency Range (GHz)
VSWR in Frequency Range Max.
Mechanical
Force to Engage (lbs. [N])/couple,
(in-lbs. [N-M]) max.
Coupling Nut Retention,
Min. N [lbs.]
Cable Retention,
N [lbs.]
Durability (Cycles)
Jam Nut Mounting Torque,
Max. [N•m] (in. lbs.)
Environmental
Temperature Range, Operating (C°)
Vibration
Physical Shock
Thermal Shock
Moisture Resistance
Salt Spray
Product Specification
1
2
2
RF Connectors
■
Dual “O” Crimp Connectors
are MIL-PRF-39012, Class II,
Category A or B qualified
COTS equivalent parts
available
Bayonet lock coupling for
quick connect/disconnect
Various connectors available
in 50 ohm versions
Fully intermateable with
comparable BNC UG/U
connectors
Low VSWR
The TE Connectivity BNC
RF connector family with
bayonet locking coupling
provides highly reliable,
quick connect /disconnect
coaxial connections.
Exclusive “O” crimp
terminations allow positive
insulation grip and require
no soldering, providing
terminations at a very low
overall applied cost.
50
500
Inner: 1.5
Outer: 2.0
5000
1500
375
-55 at 2-3 GHz
0.2 at 3 GHz
0-4
1.30
13.3/11.12
[3/2.5]
444.8
[100]
266.9 [60]
(RG58C/U)
500
25
[2.8]
Connector
Component
Connector Material
Collar
Outer Contact (Plug)
Shell (Jack)
Dielectric
Center Contact (Plug)
Center Contact
(Jack)
Gasket
Ferrule
Connector Primary Finishes1
Collar
Outer Contacts
(Plug & Jack)
Center Contacts
(Plug & Jack)
Ferrule2
1
2
Category A & B
“O” Crimp (MIL Type)
Brass, QQ-B-626
Phos. Bronze, QQ-B-750
Brass, QQ-B-626
PTFE, MIL-P-19468
Brass, QQ-B-626
Beryl. Copper, ASTM-B-643
QQ-C-530
Silicon Rubber, QQ-R-765
Copper, QQ-C-576
Silver, QQ-S-365
Bright Nickel, QQ-N-290
Silver, QQ-S-365
Bright Nickel, QQ-N-290
Gold
MIL-G-45204
Silver, QQ-S-365
Tin Lead, ASTM-B-545
If more than one finish is listed, refer to individual catalog page(s) or
customer drawings for exact specification.
Ferrules with tin-lead finish are used with nickel plated outer contacts.
-65 to +1651 / -55 to +852
MIL-STD-202
Method 204 Cond. B
MIL-STD-202
Method 213 Cond. G, 50 G’s
MIL-STD-202
Method 107
MIL-STD-202
Method 106
MIL-STD-202
Method 101 Cond. B
108-12020
Assembled to cable with polytetrafluoroethylene dielectric.
Assembled to cable with polyethylene dielectric.
2-7
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
BNC Connectors (MIL-PRF-39012) (Continued)
Plugs
MIL-PRF-39012/16
14.53
.572
[.572]
[14.53]
Dia. Max.
Plugs
L
Max.
Dia. Max.
Jacks
MIL-PRF-39012/17
.436
[11.08]
Dia. Max.
LL
Max.
Bulkhead Jacks
MIL-PRF-39012/19
H
H = 11/16" across flats,
.800 [20.32] Max. across points
Field Serviceable
Bulkhead Jack
MIL-PRF-39012/19
Termination
Style
Body Plating
Dim L
RG/U Cable
8-331350-0
—
Crimp
Silver
1.188 [30.18]
174, 188, 316
174, 188, 316
5225395-7
—
Crimp
Nickel
1.188 [30.18]
9-331350-3
—
Crimp
Silver
1.188 [30.18]
179, 187
5225395-8
—
Crimp
Nickel
1.188 [30.18]
179, 187
2-331350-1
B0004
Crimp
Silver
1.188 [30.18]
58, 58A, 58B, 58C
5225395-1
—
Crimp
Nickel
1.188 [30.18]
58, 58A, 58B, 58C
5225395-3
—
Crimp
Nickel
1.188 [30.18]
55, 223
5225395-5
—
Crimp
Nickel
1.188 [30.18]
141
2-331350-9
B0007
Crimp
Silver
1.188 [30.18]
142, 400
5225395-6
—
Crimp
Nickel
1.188 [30.18]
142, 400
331350
B0008
Crimp
Silver
1.188 [30.18]
59, 59A, 59B, 62, 62A,
62B, 124, 140, 210,
Belden 9291, 9209, 9269
5225395-2
—
Crimp
Nickel
1.188 [30.18]
59, 59A, 59B, 62, 62A,
62B, 124, 140, 210,
Belden 9291, 9209, 9269
221265-1
—
Solder/clamp
Silver
1.250 [31.75]
58, 141, 142, 55, 223, 400
1-221265-0
—
Solder/clamp
Nickel
1.250 [31.75]
58, 141, 142, 55, 223, 400
221265-2
—
Solder/clamp
Silver
1.250 [31.75]
59, 62, 71, 210
1-221265-1
—
Solder/clamp
Nickel
1.250 [31.75]
59, 62, 71, 210
TE Part No.
Military PN
M39012/17
Termination
Style
Body Plating
Dim L
RG/U Cable
2-331351-4
—
Crimp
Silver
1.200 [30.48]
174, 188, 316
5225396-7
—
Crimp
Nickel
1.200 [30.48]
174, 188, 316
2-331351-1
B0004
Crimp
Silver
1.200 [30.48]
58, 58A, 58B, 58C
5225396-1
—
Crimp
Nickel
1.200 [30.48]
58, 58A, 58B, 58C
331351
B0008
Crimp
Silver
1.200 [30.48]
59, 59A, 59B, 62, 62A,
62B, 124, 140, 210,
Belden 9291, 9209, 9269
5225396-2
—
Crimp
Nickel
1.200 [30.48]
59, 59A, 59B, 62, 62A,
62B, 124, 140, 210,
Belden 9291, 9209, 9269
TE Part No.
Military PN
M39012/19
Termination
Style
Body Plating
Dim L
RG/U Cable
1-331693-2
—
Crimp
Silver
1.406 [35.71]
174, 188, 316
5225398-7
—
Crimp
Nickel
1.375 [34.93]
174, 188, 316
5225398-8
—
Crimp
Nickel
1.375 [34.93]
179, 187
1-331693-1
B0003
Crimp
Silver
1.406 [35.71]
58, 58A, 58B, 58C
5225398-1
—
Crimp
Nickel
1.375 [34.93]
58, 58A, 58B, 58C
59, 59A, 59B, 62, 62A,
62B, 124, 140, 210,
Belden 9291, 9209, 9269
Bulkhead Jacks
1.200
L
[30.48]
H = 11/16" across flats,
.800 [20.32] Max. across points
Right Angle Plugs
Military PN
M39012/16
Jacks
LL
Max.
H
TE Part No.
331693
B0007
Crimp
Silver
1.406 [35.71]
5225398-3
—
Crimp
Nickel
1.500 [38.10]
55, 223
5225398-6
—
Crimp
Nickel
1.500 [38.10]
142, 400
TE Part No.
Military PN
M39012/
Termination
Style
Body Plating
Dim L
RG/U Cable
5225974-1
—
Crimp
Nickel
1.540 [39.12]
58
1.468 [37.29]
59, 59A, 59B, 62, 62A,
62B, 124, 140, 210,
Belden 9291, 9209, 9269
Right Angle Plugs
5225974-5
—
Crimp
Nickel
2-8
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
TNC Connectors (MIL-PRF-39012)
Product Facts
Dual “O” Crimp Connectors
are MIL-PRF-39012, Class II,
Category B qualified
■
COTS equivalent parts
available
■
Provides excellent
performance at frequencies
up to 11 GHz
■
Standard and weatherproof
versions available
■
Plugs available for high
temperature cable
Related Product Data
2
RF Connectors
■
The TE Connectivity
TNC RF connector family,
with 7/16-28 threaded
couplings, provides low
noise levels and optimum
stability, and can withstand
the shock and vibration
often present in harsh
environments.
Available in 50 ohm versions, these connectors feature cable plugs and jacks.
These connectors accept a
wide range of coaxial
cables and are intermateable with industry standard
connectors designed to
MIL-PRF-39012 specifications.
Military Category — All crimp
connectors are Category B Type
(TE Connectivity Crimp Tooling),
unless otherwise noted.
Packaging — All connectors are
packaged individually.
Characteristics
Category B
“O” Crimp (MIL Type)
Electrical
Impedance, Nom. (Ohms)
50
Working Voltage (Volts RMS)
500
Contact Resistance
Inner: 1.5
(Milliohms)
Outer: 0.2
Initial Insulation Resistance (Megohms)
5000
Dielectric Withstanding Voltage (VAC)
1500
Corona Level at 70,000 ft. (Picocoulombs)
5 max. @375 VRMS
RF Leakage, Max. (dB)
60 at 2-3 GHz
RF Insertion Loss, Max. (dB)
0.18 at 9 GHz
Frequency Range (GHz)
0-11
VSWR in Frequency Range Max.
1.3
Mechanical
Force to Engage/Couple,
2/2
lbs. [N]
[8.9/8.9]
Coupling Nut Retention,
100
Min. lbs. [N]
[444.8]
Cable Retention,
60 [266.9]
lbs. [N]
RG58C/U
Durability (Cycles)
500
Jam Nut Mounting Torque,
25
Max. lbs. [N•m]
[2.8]
Environmental
Temperature Range, Operating (C°)
-65 to +1651 / -55 to +852
MIL-STD-202
Vibration
Method 204 Cond. B
MIL-STD-202
Physical Shock
Method 213 Cond. I, (100 G’s)
MIL-STD-202
Thermal Shock
Method 107 Cond. B
MIL-STD-202
Moisture Resistance
Method 106
MIL-STD-202
Salt Spray
Method 101 Cond. B
Product Specification
108-12001
1
2
Characteristics
Connector Material
Collar
Outer Contact (Plug)
Outer Contact (Jack)
Dielectric
Center Contact (Plug)
Center Contact
(Jack)
Gasket
Ferrule
Connector Primary Finishes1
Collar
Outer Contact
(Plug & Jack)
Center Contact
(Plug & Jack)
Ferrule
1
Category B
“O” Crimp (MIL Type)
Brass, QQ-B-626
Phos. Bronze, QQ-B-750
Beryl. Copper, QQ-C-530
Brass, QQ-B-626
PTFE, MIL-P-19468
Brass, QQ-B-626
Beryl. Copper, ASTM-B-643
QQ-C-530
Silicon Rubber, QQ-R-765
Copper, QQ-C-576
Silver, QQ-S-365
Bright Nickel, QQ-N-290
Silver, QQ-S-365
Gold, MIL-G-45204
If several finishes are listed, refer to individual catalog page(s) or
customer drawings for exact specification.
Assembled to cable with polytetrafluoroethylene dielectric.
Assembled to cable with polyethylene dielectric.
2-9
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
TNC Connectors (MIL-PRF-39012) (Continued)
Plugs
Plugs
MIL-PRF-39012/26
(Weatherproof)
.640 Dia.
[16.26]Max.
L
Max.
Jacks
MIL-PRF-39012/27
(Weatherproof)
TE Part No.
Reference
Part No.
Military PN
M39012/26
Notes
Termination
Style
Body Plating
Dim L
RG/U Cable
225550-2
—
B0005
Weatherproof
Crimp
Silver
1.375 [34.93]
58, 58A, 58B, 58C
5225555-2
—
Weatherproof
Crimp
Nickel
1.375 [34.93]
58, 58A, 58B, 58C
225550-1
B0016
Weatherproof
Crimp
Silver
1.375 [34.93]
55, 55A, 55B, 223
225550-6
B0006
Weatherproof
Crimp
Silver
1.375 [34.93]
142, 142A, 142B, 400
225345-6
B0006
Crimp
Silver
1.343 [34.11]
142, 142A, 142B, 400
5-225345-6
—
Crimp
Silver
1.343 [34.11]
142, 142A, 142B, 400
5225555-6
—
Crimp
Nickel
1.375 [34.93]
142, 142A, 142B, 400
1.375 [34.93]
59, 59A, 59B, 62, 62A,
62B, 124, 140, 210,
Belden 9291, 9209, 9269
Weatherproof
225550-3
B0007
Weatherproof
Crimp
Silver
5225555-5
—
Weatherproof
Crimp
Nickel
1.375 [34.93]
141
1-225550-2
—
Weatherproof
Crimp
Silver
2.000 [50.80]
225
1-225550-3
—
Weatherproof
Crimp
Silver
1.995 [50.67]
393
5225555-7
—
Weatherproof
Crimp
Nickel
2.000 [50.80]
8, 213
5225555-8
—
Weatherproof
Crimp
Nickel
2.000 [50.80]
9, 214
1057635-1 3101-7985-00
—
Solder
Passivate / Gold
0.770 [19.60]
405 semirigid (.086 dia)
1057631-1 3101-7941-00
—
Solder
Passivate / Gold
0.770 [19.60]
402 semirigid (.141 dia)
Jacks
Military PN
M39012/27
Notes
Termination
Style
Body Plating
Dim L
RG/U Cable
225551-2
B0005
Weatherproof
Crimp
Silver
1.406 [35.72]
58, 58A, 58B, 58C
225551-5
B0015
Weatherproof
Crimp
Silver
1.406 [35.72]
141, 141A, 303
225551-1
B0016
Weatherproof
Crimp
Silver
1.406 [35.72]
55, 55A, 55B, 223
225551-6
B0006
Weatherproof
Crimp
Silver
1.406 [35.72]
142, 142A, 142B, 400
Military PN
M39012/
Notes
Termination
Style
Body Plating
Dim L
RG/U Cable
5225557-2
—
Weatherproof
Crimp
Nickel
1.500 [38.10]
58, 58A, 58B, 58C
5225557-6
—
Weatherproof
Crimp
Nickel
1.500 [38.10]
142, 142A, 142B, 400
1057679-1 3104-7985-00
—
Solder
Passivate / Gold
1.200 [30.50]
405 semirigid (.086 dia)
1057676-1 3104-7941-00
—
Solder
Passivate / Gold
1.200 [30.50]
402 semirigid (.141 dia)
TE Part No.
.450 Dia.
[11.43] Max.
1.406
[35.72] Max.
Reference
Part No.
Bulkhead Jacks
TE Part No.
H
L
Max.
Reference
Part No.
Right Angle Plugs
Military PN
M39012/
Notes
Termination
Style
Body Plating
Dim L
RG/U Cable
5225554-2
—
Weatherproof
Crimp
Silver
2.500 [63.50]
58, 58A, 58B, 58C
5225559-2
—
Weatherproof
Crimp
Nickel
2.500 [63.50]
58, 58A, 58B, 58C
5225554-6
—
Weatherproof
Crimp
Silver
2.500 [63.50]
142, 142A, 142B, 400
TE Part No.
31.75
[1.250]
L
Max.
16.26 Dia.
[.640] Max.
Reference
Part No.
1-5225554-1
—
Weatherproof
Crimp
Silver
2.500 [63.50]
393
5225559-8
—
Weatherproof
Crimp
Nickel
2.500 [63.50]
8,213
5225554-9
—
Weatherproof
Crimp
Silver
2.500 [63.50]
9,214
Notes
Termination
Style
Body Plating
Dim L
RG/U Cable
B0005
Crimp
Solder
1.375 [34.93]
58, 58A, 58B, 58C
1057699-1 3106-7985-00
----
Solder
Passivate / Gold
0.900 [22.90]
405 semirigid (.086 dia)
1057697-1 3106-7941-00
----
Solder
Passivate / Gold
0.900 [22.90]
402 semirigid (.141 dia)
Flange Mount Cable Jacks
Panel Jack
MIL-PRF-39012/29
TE Part No.
Reference
Part No.
225348-2
Military PN
M39012/29
Panel Mount Receptacles
.703 Sq.
[17.86] Max.
TE Part No.
L
Max.
Reference
Part No.
Interface
Termination
Style
1057775-1 3152-0000-10
TNC jack
solder cup
1057780-1 3152-1201-10
TNC jack
solder post
2-10
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
SMA Connectors (MIL-PRF-39012) — Introduction
Product Facts
■
Performance to 18 GHz
■
Uses industry standard
crimp tools and processes
■
Qualified to MIL-PRF-39012
■
COTS equivalent parts
available
2
RF Connectors
TE Connectivity offers a
complete line of SMA
connectors. To satisfy the
broad range of applications,
SMA connectors are available in a broad range of
standard configurations
including; straight and rightangle cable applied plugs,
bulkhead cable jacks, two
and four hole flange mount
panel jacks, straight and
right-angle pcb mount jacks
and various between and
in-series adapters, including connectors for semirigid cable and micro-strip
applications.
2-11
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
SMA Connectors (MIL-PRF-39012) — Introduction (Continued)
Electrical Properties
MIL Type
MIL-PRF-39012/55
MIL-PRF-39012/56
MIL-PRF-39012/57,
/58 & /59
MIL-PRF-39012/60,
& /61
MIL-PRF-39012/79
MIL-PRF-39012/80
MIL-PRF-39012/81,
/82 & /83
MIL-PRF-39012/92
MIL-PRF-39012/93
& /94
Cable
Military
Slash Sheet
M17/
Frequency
Max.
(GHz)
93-RG178
54-RG122, 119-RG174,
94-RG179, 113-RG316,
15228-RG058, 60-RG142,
84-RG223, 111-RG303,
128-RG400
169-00001
173-00001, 172-00001,
157-00001
155-0001, 158-00001,
167-00001, 170-00001,
175-00001
93-RG178
54-RG122, 119-RG174,
94-RG179, 113-RG316,
152-00001
28-RG058, 60-RG142,
84-RG223, 111-RG303,
128-RG400
169-00001
173-00001, 172-00001
157-00001
155-0001, 158-00001,
167-00001, 170-00001,
175-00001
93-RG178
54-RG122, 119-RG174,
113-RG316
28-RG058, 60-RG142,
84-RG223, 111-RG303,
128-RG400
169-00001
173-00001, 172-00001,
157-00001
155-0001, 158-00001,
167-00001, 170-00001,
175-00001
12.4
Corona
Contact Resistance Insulation
RF
Dielectric
RF High
RF
(milliohms max.) Resistance Withstanding Extinction
Transmission Potential Leakage
Voltage
at
(megohms
Voltage
at 5 MHz
Loss
Outer
Center
Ft.
(GHz)
min.)
(Volts RMS) (V70,000
(V RMS) (dB min.)
Contact Contact
RMS min.)
1.20+0.025
3
2
5,000
500
125
0.06 x sqrt (freq) 335
-60
12.4
1.15+0.02
3
2
5,000
750
190
0.06 x sqrt (freq)
500
-60
12.4
1.15+0.01
3
2
5,000
1000
250
0.06 x sqrt (freq)
670
-60
12.4
1.15+0.01
3
2
5,000
500
125
0.06 x sqrt (freq)
335
-60
12.4
1.15+0.01
3
2
5,000
750
190
0.06 x sqrt (freq)
500
-60
12.4
1.15+0.01
3
2
5,000
1000
250
0.06 x sqrt (freq)
670
-60
12.4
1.20+0.03
4
2
5,000
500
125
0.15 x sqrt (freq)
335
-60
12.4
1.15+0.03
4
2
5,000
750
190
0.15 x sqrt (freq)
500
-60
12.4
1.15+0.02
4
2
5,000
1000
250
0.15 x sqrt (freq)
670
-60
12.4
1.15+0.02
4
2
5,000
500
125
0.15 x sqrt (freq)
335
-60
12.4
1.15+0.02
4
2
5,000
750
190
0.15 x sqrt (freq)
500
-60
12.4
1.15+0.02
4
2
5,000
1000
250
0.15 x sqrt (freq)
670
-60
VSWR
(fGHz)
12.4
1.20+0.025
3
2
5,000
500
125
0.06 x sqrt (freq)
335
-60
12.4
1.15+0.02
3
2
5,000
750
190
0.06 x sqrt (freq)
500
-60
12.4
1.15+0.01
3
2
5,000
1000
250
0.06 x sqrt (freq)
670
-60
12.4
1.15+0.01
3
2
5,000
500
125
0.06 x sqrt (freq)
335
-60
12.4
1.15+0.01
3
2
5,000
750
190
0.06 x sqrt (freq)
500
-60
12.4
1.15+0.01
3
2
5,000
1000
250
0.06 x sqrt (freq)
670
-60
—
N/A
N/A
3
2
5,000
1000
250
N/A
670
N/A
133-RG405, 133-00001
Thru 133-00011 Captive
130-RG402, 130-00001
Thru 133-00007 Captive
133-RG405, 133-00001
Thru 133-00011
Non-Captive
130-RG402, 130-00001
Thru 130-00007
Non-Captive
133-RG405, 133-00001
Thru 133-00011
130-RG402, 130-00001
Thru 130-00007
133-RG405, 133-00001
Thru 133-00011 Captive
130-RG402, 130-00001
Thru 133-00007 Captive
133-RG405, 133-00001
Thru 133-00011
Non-Captive
130-RG402, 130-00001
Thru 130-00007
Non-Captive
—
18
1.07+0.01
3
2
5,000
1000
250
0.03 x sqrt (freq)
670
-90
18
1.05+0.01
3
2
5,000
1500
375
0.03 x sqrt (freq) 1000
-90
18
1.07+0.008
3
2
5,000
1000
250
0.03 x sqrt (freq)
670
-90
18
1.05+0.008
3
2
5,000
1500
375
0.03 x sqrt (freq) 1000
-90
18
1.10+0.01
4
2
5,000
1000
250
0.05 x sqrt (freq)
670
-90
18
1.10+0.01
4
2
5,000
1500
375
0.05 x sqrt (freq) 1000
-90
18
1.07+0.01
3
2
5,000
1000
250
0.03 x sqrt (freq)
670
-90
18
1.05+0.01
3
2
5,000
1500
375
0.03 x sqrt (freq) 1000
-90
18
1.07+0.008
3
2
5,000
1000
250
0.03 x sqrt (freq)
670
-90
18
1.05+0.008
3
2
5,000
1500
375
0.03 x sqrt (freq) 1000
-90
18
1.035+0.005
N/A
2
5,000
N/A
250
0.03 x sqrt (freq)
670
-90
18
N/A
3
2
5,000
1000
250
N/A
670
N/A
—
2-12
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
SMA Connectors (MIL-PRF-39012) — Introduction (Continued)
Mechanical and Environmental Properties
MIL Type
Coupling
Force to Coupling
Nut
Proof
Engage Retention
Torque
(in-lbs)
(lbs.)
(in-lbs)
60
15 min.
MIL-PRF-39012/56 2 max.
60
15 min.
MIL-PRF-39012/57, 2 max.
/58 & /59
N/A
N/A
MIL-PRF-39012/60, 2 max.
& /61
N/A
N/A
N/A
N/A
500 cycles min.
7-10
N/A
N/A
N/A
500 cycles min.
7-10
N/A
2 lbs. max. w/
.0370 dia. pin
1 oz. min. w/
.0355 dia. pin 500 cycles min.
7-10
N/A
N/A
N/A
2 lbs. max. w/
.0370 dia. pin
1 oz. min. w/ 500 cycles min.
.0355 dia. pin
7-10
30
16
60
55
30
16
60
55
30
16
MIL-PRF-39012/92 2 max.
MIL-PRF-39012/93 2 max.
& /94
60
15 min.
N/A
N/A
N/A
15 min.
N/A
Recommended
Mating
Torque
(in lbs.)
N/A
N/A
60
15 min.
Connector
Durability
10
20
30
40
10
20
30
40
10
20
30
40
MIL-PRF-39012/81, max.
2
/82 & /83
MIL-PRF-39012/80 2 max.
60
Withdrawal
0.036 [0.91]
0.067 [1.70]
0.110 [2.79]
0.122 [3.10]
0.036 [0.91]
0.067 [1.70]
0.110 [2.79]
0.122 [3.10]
0.036 [0.91]
0.067 [1.70]
0.110 [2.79]
0.122 [3.10]
133-RG405, 133-00001
Thru 133-00011
130-RG402, 130-00001
Thru 130-00007
133-RG405, 133-00001
Thru 133-00011
130-RG402, 130-00001
Thru 130-00007
133-RG405, 133-00001
Thru 133-00011
130-RG402, 130-00001
Thru 130-00007
N/A
MIL-PRF-39012/79 2 max.
Insertion
60
55
N/A
N/A
N/A
N/A
N/A
N/A
500 cycles min.
7-10
N/A
N/A
500 cycles min.
7-10
2 lbs. max. w/
.0370 dia. pin
1 oz. min. w/
500 cycles min.
.0355 dia. pin
7-10
N/A
2 lbs. max. w/
.0370 dia. pin
N/A
100 cycles min.
1 oz. min. w/ 500 cycles min.
.0355 dia. pin
2
RF Connectors
MIL-PRF-39012/55 2 max.
Cable Retention
Lbs. Min. In.-Ounces
Dia.
7-10
7-10
Environmental
MIL Type
MIL-PRF-39012/55
MIL-PRF-39012/56
MIL-PRF-39012/57,
/58 & /59
MIL-PRF-39012/60,
& /61
MIL-PRF-39012/79
MIL-PRF-39012/80
MIL-PRF-39012/81,
/82 & /83
MIL-PRF-39012/92
MIL-PRF-39012/93
& /94
Vibration
Shock
Thermal Shock
Corrosion
(Salt Spray)
MIL-STD-202
Method 204
Cond. D
No Discontinuity
MIL-STD-202
Method 204
Cond. D
No Discontinuity
MIL-STD-202
Method 204
Cond. D
No Discontinuity
MIL-STD-1344
Method 2005
Cond. IV
No Discontinuity
MIL-STD-202
Method 204
Cond. D
No Discontinuity
MIL-STD-202
Method 204
Cond. D
No Discontinuity
MIL-STD-202
Method 204
Cond. D
No Discontinuity
MIL-STD-202
Method 204
Cond. D
No Discontinuity
MIL-STD-202
Method 204
Cond. D
No Discontinuity
MIL-STD-202
Method 213
Cond. 1
No Discontinuity
MIL-STD-202
Method 213
Cond. 1
No Discontinuity
MIL-STD-202
Method 213
Cond. 1
No Discontinuity
MIL-STD-1344
Method 2004
Cond. G
No Discontinuity
MIL-STD-202
Method 213
Cond. 1
No Discontinuity
MIL-STD-202
Method 213
Cond. 1
No Discontinuity
MIL-STD-202
Method 213
Cond. 1
No Discontinuity
MIL-STD-202
Method 213
Cond. 1
No Discontinuity
MIL-STD-202
Method 213
Cond. 1
No Discontinuity
MIL-STD-202
Method 107
Cond. B
Except THI 85C
MIL-STD-202
Method 107
Cond. B
Except THI 85C
MIL-STD-202
Method 107
Cond. B
Except THI 85C
MIL-STD-1344
Method 1003
Cond. A
Except THI 200C
MIL-STD-202
Method 107
Cond. B
Except THI 115C
MIL-STD-202
Method 107
Cond. B
Except THI 115C
MIL-STD-202
Method 107
Cond. B
Except THI 115C
MIL-STD-202
Method 107
Cond. B
Except THI 115C
MIL-STD-202
Method 107
Cond. B
Except THI 125C
MIL-STD-202
Method 101
Cond. B
MIL-STD-202
Method 101
Cond. B
MIL-STD-202
Method 101
Cond. B
MIL-STD-1344
Method 1001
Cond. B
MIL-STD-202
Method 101
Cond. B
MIL-STD-202
Method 101
Cond. B
MIL-STD-202
Method 101
Cond. B
MIL-STD-202
Method 101
Cond. B
MIL-STD-202
Method 101
Cond. B
Moisture
Resistance
MIL-STD-202, Method 106
No Measurement @ High Humidity
Insulation Resistance 200 Megaohms
with 5 min. of removal from humidity
MIL-STD-202, Method 106
No Measurement @ High Humidity
Insulation Resistance 200 Megaohms
with 5 min. of removal from humidity
MIL-STD-202, Method 106
No Measurement @ High Humidity
Insulation Resistance 200 Megaohms
with 5 min. of removal from humidity
MIL-STD-1344, Method 1002, Type II
No Measurement @ High Humidity
Insulation Resistance 200 Megaohms
with 5 min. of removal from humidity
MIL-STD-202, Method 106
No Measurement @ High Humidity
Insulation Resistance 200 Megaohms
with 5 min. of removal from humidity
MIL-STD-202, Method 106
No Measurement @ High Humidity
Insulation Resistance 200 Megaohms
with 5 min. of removal from humidity
MIL-STD-202, Method 106
No Measurement @ High Humidity
Insulation Resistance 200 Megaohms
with 5 min. of removal from humidity
MIL-STD-202, Method 106
No Measurement @ High Humidity
Insulation Resistance 200 Megaohms
with 5 min. of removal from humidity
MIL-STD-202, Method 106
No Measurement @ High Humidity
Insulation Resistance 200 Megaohms
with 5 min. of removal from humidity
2-13
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
SMA Connectors (MIL-PRF-39012) — For Flexible Cable
Straight Plugs
.312
Hex.
[7.92]
.250
Hex.
[6.35]
Outer
Sleeve1
OSM Plug
.330
[8.38]
.312
Hex.
[7.92]
.312
Hex.
[7.92]
Outer
Sleeve1
OSM Plug
.330
[8.38]
.72
[18.3]
L Max.
L Max.
L Max.
Outline 1
Outline 2
Outline 3
Military
Part No.
M39012/55
TE
Part No.
Reference3
Part No.
(Ref. Only)
Outline
Cat.1
-3006
1051757-1
2031-8006-92
1
A
178
1.030 [26.16]
—
—
-3007
1051759-1
2031-8007-92
1
A
174, 316
1.030 [26.16]
—
—
-3009
1051762-1
2031-8009-92
2
A
58, 142, 223
1.030 [26.16]
—
—
2031-5102-02
2031-5102-00
RG/U
Cable
COTS
Part No.
Dim. L
Reference3
Part No.
(Ref. Only)
B3011
1051764-1
2031-8011-92
1
B
178
1.250 [31.75]
1051687-1
1051686-1
B3012
1051766-1
2031-8012-92
2
B
174, 316
1.250 [31.75]
1051665-1
1051664-1
2031-5012-02
2031-5012-00
B3014
1051768-1
2031-8014-92
2
B
58
1.250 [31.75]
1051678-1
2031-5055-00
2031-5005-02
2031-5005-00
B3015
1051769-1
2031-8015-92
2
B
142
1.250 [31.75]
1051651-1
1051650-1
B3016
1051770-1
2031-8016-92
2
B
223
1.250 [31.75]
1051651-1
1051650-1
2031-5005-02
2031-5005-00
B3019
1056413-1
2031-8019-92
1
B
174, 316
1.375 [34.93]
1051665-1
1051664-1
2031-5012-02
2031-5012-00
221117-2
—
B3019
225532-42
—
3
B
174, 188,
188A, 316
.950 [24.13]
B3021
225532-12
—
3
B
58, 58A,
58B, 58C
1.030 [26.16]
—
—
1.375 [34.93]
1051661-1
1051660-1
2031-5011-02
2031-5011-00
142, 142A, 142B,
1.030 [26.16]
400, Belden 84142
221117-1
—
—
B3022
—
225532-32
—
2
B
—
4
B
142
—
—
—
2
B
223
1.375 [34.93]
1051661-1
1051660-1
2031-5011-02
2031-5011-00
B3023
1-225532-02
—
4
B
223, 55,
55A, 55B
1.030 [26.16]
—
—
B
141, 141A,
303
1.030 [26.16]
—
—
2031-5102-02
2031-5102-00
2031-5012-02
2031-5012-00
B3024
225532-92
—
4
-3025
1051780-1
2031-8025-92
1
C
178
1.250 [31.75]
1051687-1
1051686-1
-3026
1051782-1
2031-8026-92
1
C
174, 316
1.250 [31.75]
1051665-1
1051664-1
* No safety wire holes.
1 Category A: solder sleeve; Categories B, C and D: crimp sleeve.
2 Use Integral Die Crimp Tool Part Number 220061-1.
3 -92 and -02 indicate passivated stainless steel finish. -00 indicates gold plated finish.
See page 2-4 for description of categories and pages 2-82 to 2-87 for tooling (unless noted otherwise).
2-14
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
SMA Connectors (MIL-PRF-39012) — For Flexible Cable (Continued)
Straight Plugs (Continued)
.312
Hex.
[7.92]
.250
Hex.
[6.35]
Outer
Sleeve1
OSM Plug
.312
Hex.
[7.92]
Outer
Sleeve1
OSM Plug
.330
[8.38]
.72
[18.3]
2
L Max.
RF Connectors
.330
[8.38]
.312
Hex.
[7.92]
L Max.
L Max.
Outline 1
Outline 2
Outline 3
Military
Part No.
M39012/55
TE
Part No.
Reference3
Part No.
(Ref. Only)
Outline
Cat.1
RG/U
Cable
Dim. L
COTS
Part No.
Reference3
Part No.
(Ref. Only)
-3028
1051785-1
2031-8028-92
2
C
142, 223
1.250 [31.75]
1051661-1
1051660-1
2031-5011-02
2031-5011-00
-3029
1051787-1
2031-8029-92
2
C
58, 303
1.250 [31.75]
—
—
*-3106
1051789-1
2031-8106-92
1
A
178
1.030 [26.16]
—
—
*-3107
1051791-1
2031-8107-92
1
A
174, 316
1.030 [26.16]
—
—
*-3109
1051794-1
2031-8109-92
2
A
58, 142, 223
1.030 [26.16]
—
—
*B3112
1051797-1
2031-8112-92
2
B
174, 316
1.250 [31.75]
1051665-1
1051664-1
2031-5012-02
2031-5012-00
*B3113
1051798-1
2031-8113-92
2
B
122
1.250 [31.75]
—
—
*B3114
1051799-1
2031-8114-92
2
B
58
1.250 [31.75]
1051678-1
2031-5055-00
*B3115
1051800-1
2031-8115-92
2
B
142
1.250 [31.75]
1051651-1
1051650-1
2031-5005-02
2031-5005-00
*B3116
1051801-1
2031-8116-92
2
B
223
1.250 [31.75]
1051651-1
1051650-1
2031-5005-02
2031-5005-00
*B3119
1051804-1
2031-8119-92
1
B
174, 316
1.375 [34.93]
1051665-1
1051664-1
2031-5012-02
2031-5012-00
—
—
—
2
B
142
1.375 [34.93]
1051661-1
1051660-1
2031-5011-02
2031-5011-00
—
—
—
2
B
223
1.375 [34.93]
1051661-1
1051660-1
2031-5011-02
2031-5011-00
*-3125
1051810-1
2031-8125-92
1
C
178
1.250 [31.75]
1051687-1
1051686-1
2031-5102-02
2031-5102-00
*-3126
1051812-1
2031-8126-92
1
C
174, 316
1.250 [31.75]
1051665-1
1051664-1
2031-5012-02
2031-5012-00
*-3128
1051815-1
2031-8128-92
2
C
142, 223
1.250 [31.75]
1051661-1
1051660-1
2031-5011-02
2031-5011-00
*-3129
1051816-1
2031-8129-92
2
C
58, 303
1.250 [31.75]
—
—
2031-5011-02
2031-5011-00
2031-5011-02
2031-5011-00
-3502
1051788-1
2031-8052-92
2
D
142, 400
1.250 [31.75]
1051661-1
1051660-1
*-3602
1051817-1
2031-8162-92
2
D
142, 400
1.250 [31.75]
1051661-1
1051660-1
* No safety wire holes.
1 Category A: solder sleeve; Categories B, C and D: crimp sleeve.
2 Use Integral Die Crimp Tool Part Number 220061-1.
3 -92 and -02 indicate passivated stainless steel finish. -00 indicates gold plated finish.
See page 2-4 for description of categories and pages 2-82 to 2-87 for tooling (unless noted otherwise).
2-15
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
SMA Connectors (MIL-PRF-39012) — For Flexible Cable (Continued)
.67
[17.0]
Right Angle Plugs
.63
[16.0]
.54
[13.7]
.50
[12.7]
.330
[8.38]
.330
[8.38]
OSM Plug
OSM Plug
L
Max.
.312
Hex.
[7.92]
.312
Hex.
[7.92]
L
Max.
Outer
Sleeve1
Outer
Sleeve1
Outline 1
Outline 2
Military
Part No.
M39012/56
TE
Part No.
Reference2
Part No.
(Ref. Only)
Outline
Cat.1
-3006
1052149-1
2037-8006-92
1
-3007
1052151-1
2037-8007-92
1
-3008
1052152-1
2037-8008-92
1
A
122
1.125 [28.58]
—
—
-3009
1052154-1
2037-8009-92
1
A
58, 142, 223
1.125 [28.58]
1052063-1
1052062-1
2037-5005-02
2037-5005-00
-3010
1052155-1
2037-8010-92
1
A
303
1.125 [28.58]
1052063-1
1052062-1
2037-5005-02
2037-5005-00
B3011
1052156-1
2037-8011-92
1
B
178
1.250 [31.75]
1052098-1
1052097-1
2037-5100-02
2037-5100-00
B3012
1052157-1
2037-8012-92
1
B
174, 316
1.250 [31.75]
1052076-1
1052075-1
2037-5008-02
2037-5008-00
B3013
1052158-1
2037-8013-92
1
B
122
1.250 [31.75]
—
—
B3014
1052159-1
2037-8014-92
1
B
58
1.250 [31.75]
1052092-1
2037-5056-00
B3015
1052160-1
2037-8015-92
1
B
142
1.250 [31.75]
1052072-1
1052071-1
2037-5007-02
2037-5007-00
B3016
1052161-1
2037-8016-92
1
B
223
1.250 [31.75]
1052072-1
1052071-1
2037-5007-02
2037-5007-00
B3017
1052162-1
2037-8017-92
1
B
303
1.250 [31.75]
1052092-1
2037-5056-00
B3018
1052163-1
2037-8018-92
1
B
178
1.375 [34.93]
1052098-1
1052097-1
2037-5100-02
2037-5100-00
B3019
1052165-1
2037-8019-92
1
B
174, 316
1.375 [34.93]
1052076-1
1052075-1
2037-5008-02
2037-5008-00
B3020
1052166-1
2037-8020-92
1
B
122
1.375 [34.93]
—
—
B3021
1052167-1
2037-8021-92
1
B
58
1.375 [34.93]
1052092-1
2037-5056-00
B3022
1052168-1
2037-8022-92
1
B
142
1.375 [34.93]
1052072-1
1052071-1
2037-5007-02
2037-5007-00
B3023
1052169-1
2037-8023-92
1
B
223
1.375 [34.93]
1052072-1
1052071-1
2037-5007-02
2037-5007-00
B3024
1052170-1
2037-8024-92
1
B
303
1.375 [34.93]
1052092-1
2037-5056-00
2037-5100-02
2037-5100-00
2037-5008-02
2037-5008-00
COTS
Part No.
Reference2
Part No.
(Ref. Only)
RG/U
Cable
Dim. L
A
178
1.125 [28.58]
—
—
A
174, 316
1.125 [28.58]
1052067-1
1052066-1
2037-5006-02
2037-5006-00
-3025
1052171-1
2037-8025-92
1
C
178
1.375 [34.93]
1052098-1
1052097-1
-3026
1052173-1
2037-8026-92
1
C
174, 316
1.375 [34.93]
1052076-1
1052075-1
-3027
1052174-1
2037-8027-92
1
C
122
1.375 [34.93]
—
—
1.375 [34.93]
1052072-1
1052071-1
2037-5007-02
2037-5007-00
-3028
1052176-1
2037-8028-92
1
C
142, 223
* No safety wire holes.
1 Category A: solder sleeve; Categories B, C and D: crimp sleeve.
2 -92 and -02 indicate passivated stainless steel finish. -00 indicates gold plated finish.
See page 2-4 for description of categories and pages 2-82 to 2-87 for tooling (unless noted otherwise).
2-16
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
SMA Connectors (MIL-PRF-39012) — For Flexible Cable (Continued)
.67
[17.0]
Right Angle Plugs (Continued)
.63
[16.0]
.54
[13.7]
.50
[12.7]
.330
[8.38]
.330
[8.38]
OSM Plug
OSM Plug
L
Max.
.312
Hex.
[7.92]
.312
Hex.
[7.92]
2
L
Max.
RF Connectors
Outer
Sleeve1
Outer
Sleeve1
Outline 1
Military
Part No.
M39012/56
TE
Part No.
Reference2
Part No.
(Ref. Only)
Outline 2
Outline
Cat.1
RG/U
Cable
Dim. L
COTS
Part No.
Reference2
Part No.
(Ref. Only)
2037-5056-00
-3029
1052177-1
2037-8029-92
1
C
58, 303
1.375 [34.93]
1052092-1
*-3106
1052179-1
2037-8106-92
1
A
178
1.125 [28.58]
—
—
1052067-1
1052066-1
2037-5006-02
2037-5006-00
*-3107
1052181-1
2037-8107-92
1
A
174, 316
1.125 [28.58]
*-3108
1052182-1
2037-8108-92
1
A
122
1.125 [28.58]
—
—
*-3109
1052184-1
2037-8109-92
1
A
58, 142, 223
1.125 [28.58]
1052063-1
1052062-1
2037-5005-02
2037-5005-00
*-3110
1052185-1
2037-8110-92
1
A
303
1.125 [28.58]
1052063-1
1052062-1
2037-5005-02
2037-5005-00
*B3111
1052186-1
2037-8111-92
1
B
178
1.250 [31.75]
1052098-1
1052097-1
2037-5100-02
2037-5100-00
*B3112
1052187-1
2037-8112-92
1
B
174, 316
1.250 [31.75]
1052076-1
1052075-1
2037-5008-02
2037-5008-00
*B3113
1052188-1
2037-8113-92
1
B
122
1.250 [31.75]
—
—
*B3114
1052189-1
2037-8114-92
1
B
58
1.250 [31.75]
1052092-1
2037-5056-00
*B3115
1052190-1
2037-8115-92
1
B
142
1.250 [31.75]
1052072-1
1052071-1
2037-5007-02
2037-5007-00
*B3116
1052191-1
2037-8116-92
1
B
223
1.250 [31.75]
1052072-1
1052071-1
2037-5007-02
2037-5007-00
*B3117
1052192-1
2037-8117-92
1
B
303
1.250 [31.75]
1052092-1
2037-5056-00
2037-5100-02
2037-5100-00
2037-5008-02
2037-5008-00
*B3118
1052193-1
2037-8118-92
1
B
178
1.375 [34.93]
1052098-1
1052097-1
*B3119
1052194-1
2037-8119-92
1
B
174, 316
1.375 [34.93]
1052076-1
1052075-1
*B3120
1052195-1
2037-8120-92
1
B
122
1.375 [34.93]
—
—
*B3121
1052196-1
2037-8121-92
1
B
58
1.375 [34.93]
1052092-1
2037-5056-00
*B3122
1052197-1
2037-8122-92
1
B
142
1.375 [34.93]
1052072-1
1052071-1
2037-5007-02
2037-5007-00
*B3123
1052198-1
2037-8123-92
1
B
223
1.375 [34.93]
1052072-1
1052071-1
2037-5007-02
2037-5007-00
*B3124
1052199-1
2037-8124-92
1
B
303
1.375 [34.93]
1052092-1
2037-5056-00
*-3125
1052201-1
2037-8125-92
1
C
178
1.375 [34.93]
1052098-1
1052097-1
2037-5100-02
2037-5100-00
*-3126
1052203-1
2037-8126-92
1
C
174, 316
1.375 [34.93]
1052076-1
1052075-1
2037-5008-02
2037-5008-00
*-3127
1052204-1
2037-8127-92
1
C
122
1.375 [34.93]
—
—
*-3128
1052206-1
2037-8128-92
1
C
142, 223
1.375 [34.93]
1052072-1
1052071-1
2037-5007-02
2037-5007-00
*-3129
1052207-1
2037-8129-92
1
C
58, 303
1.375 [34.93]
1052092-1
2037-5056-00
2037-5007-02
2037-5007-00
2037-5007-02
2037-5007-00
-3502
1052178-1
2037-8052-92
2
D
142, 400
1.375 [34.93]
1052072-1
1052071-1
*-3602
1086723-1
2037-8162-92
2
D
142, 400
1.375 [34.93]
1052072-1
1052071-1
* No safety wire holes.
1 Category A: solder sleeve; Categories B, C and D: crimp sleeve.
2 -92 and -02 indicate passivated stainless steel finish. -00 indicates gold plated finish.
See page 2-4 for description of categories and pages 2-82 to 2-87 for tooling (unless noted otherwise).
2-17
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
SMA Connectors (MIL-PRF-39012) — For Flexible Cable (Continued)
Straight Jacks
OSM
Jack
.312
Hex.
[7.92]
.250
Hex.
[6.35]
Outer
Sleeve1
.312
Hex.
[7.92]
OSM
Jack
.250
[6.35]
.59
[15.0]
Outer
Sleeve1
.53
[13.5]
L Max.
L Max.
Outline 1
Outline 2
Military
Part No.
M39012/57
TE
Part No.
Reference2
Part No.
(Ref. Only)
Outline
Cat.1
RG/U
Cable
Dim. L
COTS
Part No.
Reference2
Part No.
(Ref. Only)
B3011
1051904-1
2032-8011-92
1
B
178
1.265 [32.13]
1051869-1
1051868-1
2032-5026-02
2032-5026-00
B3012
1051905-1
2032-8012-92
1
B
174, 316
1.265 [32.13]
1051855-1
2032-5003-02
B3013
1051906-1
2032-8013-92
2
B
122
1.265 [32.13]
—
—
B3014
1051907-1
2032-8014-92
2
B
58
1.265 [32.13]
1051866-1
2032-5021-00
B3015
1051908-1
2032-8015-92
2
B
142
1.265 [32.13]
1051861-1
2032-5007-00
B3016
1051909-1
2032-8016-92
2
B
223
1.265 [32.13]
1051861-1
2032-5007-00
B3017
1051910-1
2032-8017-92
2
B
303
1.265 [32.13]
1051866-1
2032-5021-00
2032-5026-02
2032-5026-00
2032-5003-02
B3018
1051911-1
2032-8018-92
1
B
178
1.265 [32.13]
1 -1
1051868-1
B3019
1051912-1
2032-8019-92
1
B
174, 316
1.265 [32.13]
1051855-1
B3020
1051913-1
2032-8020-92
2
B
122
1.265 [32.13]
—
—
B3021
1051914-1
2032-8021-92
2
B
58
1.265 [32.13]
1051866-1
2032-5021-00
B3022
1051915-1
2032-8022-92
2
B
142
1.265 [32.13]
1051861-1
2032-5007-00
B3023
1051916-1
2032-8023-92
2
B
223
1.265 [32.13]
1051861-1
2032-5007-00
B3024
1051917-1
2032-8024-92
2
B
303
1.265 [32.13]
1051866-1
2032-5021-00
-3025
1051918-1
2032-8025-92
1
C
178
1.265 [32.13]
1051869-1
1051868-1
2032-5026-02
2032-5026-00
-3026
1051919-1
2032-8026-92
1
C
174, 316
1.265 [32.13]
1051855-1
2032-5003-02
-3027
1051920-1
2032-8027-92
2
C
122
1.265 [32.13]
—
—
-3028
1051921-1
2032-8028-92
2
C
142, 223
1.265 [32.13]
1051861-1
2032-5007-00
-3029
1051922-1
2032-8029-92
2
C
58, 303
1.265 [32.13]
1051866-1
2032-5021-00
-3502
1051923-1
2032-8052-92
2
D
142, 400
1.265 [32.13]
1051861-1
2032-5007-00
1
Category A: solder sleeve; Categories B, C and D: crimp sleeve.
-92 and -02 indicate passivated stainless steel finish. -00 indicates gold plated finish.
See page 2-4 for description of categories and pages 2-82 to 2-87 for tooling (unless noted otherwise).
2
2-18
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
SMA Connectors (MIL-PRF-39012) — For Flexible Cable (Continued)
.250
Hex.
[6.35]
Panel Mount Jacks
.102 Dia.
[2.59] 4 Plcs.
Outer
Sleeve1
OSM
Jack
.385
[9.78]
.065
[1.65]
2
.065
[1.65]
.375
[9.53]
L Max.
L Max.
Outline 1
RF Connectors
.500
Sq.
[12.70]
.340
[8.64]
Typ.
Outer
Sleeve1
OSM
Jack
Outline 2
Military
Part No.
M39012/58
TE
Part No.
Reference2
Part No.
(Ref. Only)
Outline
Cat.1
COTS
Part No.
Reference2
Part No.
(Ref. Only)
B3011
1052042-1
2036-8011-92
2
B
178
B3012
1254028-1
2036-8012-92
2
B
174, 316
1.265 [32.13]
1052024-1
2036-5004-02
1.265 [32.13]
1052024-1
B3013
1484499-1
2036-8013-92
1
B
122
2036-5004-02
1.265 [32.13]
—
B3014
1484500-1
2036-8014-92
1
B
—
58
1.265 [32.13]
—
B3015
1052043-1
2036-8015-92
1
—
B
142
1.265 [32.13]
—
B3016
1484501-1
2036-8016-92
—
1
B
223
1.265 [32.13]
—
B3017
1484502-1
—
2036-8017-92
1
B
303
1.265 [32.13]
1087843-1
2036-5014-02
B3018
B3019
1052044-1
2036-8018-92
2
B
178
1.265 [32.13]
1052030-1
2036-5016-00
1484503-1
2036-8019-92
2
B
174, 316
1.265 [32.13]
1052024-1
2036-5004-02
B3020
1484504-1
2036-8020-92
1
B
122
1.265 [32.13]
—
—
B3021
1484505-1
2036-8021-92
1
B
58
1.265 [32.13]
1087843-1
2036-5014-02
B3022
1052045-1
2036-8022-92
1
B
142
1.265 [32.13]
—
—
B3023
1484506-1
2036-8023-92
1
B
223
1.265 [32.13]
—
—
B3024
1484507-1
2036-8024-92
1
B
303
1.265 [32.13]
1087843-1
2036-5014-02
-3025
1052046-1
2036-8025-92
2
C
178
1.125 [28.58]
1052030-1
2036-5016-00
-3026
1052047-1
2036-8026-92
2
C
174, 316
1.125 [28.58]
1052024-1
2036-5004-02
-3027
1052048-1
2036-8027-92
1
C
122
1.125 [28.58]
—
—
-3028
1052049-1
2036-8028-92
1
C
142, 223
1.125 [28.58]
—
—
-3029
1052050-1
2036-8029-92
1
C
58, 303
1.125 [28.58]
—
—
-3502
1052051-1
2036-8052-92
1
D
142, 400
1.125 [28.58]
—
—
RG/U
Cable
Dim. L
1
Category A: solder sleeve; Categories B, C and D: crimp sleeve.
2 -92 and -02 indicate passivated stainless steel finish. -00 indicates gold plated finish.
See page 2-4 for description of categories and pages 2-82 to 2-87 for tooling (unless noted otherwise).
2-19
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
SMA Connectors (MIL-PRF-39012) — For Flexible Cable (Continued)
Bulkhead Jacks
.437 Hex.
[11.10]
.250
Hex.
[6.35]
Outer
Sleeve1
O-Ring
Lockwasher
.312
Hex.
[7.92]
OSM
Jack
.004
.281 +– .000
+ 0.10
[7.14 – 0.00 ]
.437 Hex.
[11.10]
.250
Hex
[6.35]
Outer
Sleeve1
O-Ring
Lockwasher
.312
Hex.
[7.92]
OSM
Jack
.003
.125 +– .000
0.08
[3.18 +– 0.00 ]
.055–.103
[1.40–2.62]
Panel
.055–.103
[1.40–2.62]
Panel
.450
[11.43]
L Max.
L Max.
Recommended
Mounting Hole
.450
[11.43]
Outline 1
Outline 2
Military
Part No.
M39012/59
TE
Part No.
Reference2
Part No.
(Ref. Only)
Outline
Cat.1
RG/U
Cable
Dim. L
COTS
Part No.
Reference2
Part No.
(Ref. Only)
B3011
1362216-1
2034-8011-92
1
B
178
1.265 [32.13]
1051951-1
1051950-1
2034-5031-02
2034-5031-00
B3012
1051986-1
2034-8012-92
1
B
174, 316
1.265 [32.13]
1051933-1
2034-5005-00
B3013
1083993-1
2034-8013-92
2
B
122
1.265 [32.13]
—
—
B3014
1331293-1
2034-8014-92
2
B
58
1.265 [32.13]
—
—
B3015
1253627-1
2034-8015-92
2
B
142
1.265 [32.13]
—
—
B3016
1221165-1
2034-8016-92
2
B
223
1.265 [32.13]
—
—
B3017
1484542-1
2034-8017-92
2
B
303
1.265 [32.13]
—
—
B3018
1051987-1
2034-8018-92
1
B
178
1.265 [32.13]
1051951-1
1051950-1
2034-5031-02
2034-5031-00
B3019
1051988-1
2034-8019-92
1
B
174, 316
1.265 [32.13]
1051933-1
2034-5005-00
B3020
1484543-1
2034-8020-92
2
B
122
1.265 [32.13]
—
—
B3021
1087842-1
2034-8021-92
2
B
58
1.265 [32.13]
—
—
B3022
1051989-1
2034-8022-92
2
B
142
1.265 [32.13]
—
—
B3023
1051990-1
2034-8023-92
2
B
223
1.265 [32.13]
—
—
B3024
1051991-1
2034-8024-92
2
B
303
1.265 [32.13]
—
—
-3025
1051992-1
2034-8025-92
1
C
178
1.125 [28.58]
1051951-1
1051950-1
2034-5031-02
2034-5031-00
-3026
1051994-1
2034-8026-92
1
C
174, 316
1.125 [28.58]
1051933-1
2034-5005-00
-3027
1051995-1
2034-8027-92
2
C
122
1.125 [28.58]
—
—
-3028
1051996-1
2034-8028-92
2
C
142, 223
1.125 [28.58]
—
—
-3029
1051997-1
2034-8029-92
2
C
58, 303
1.125 [28.58]
—
—
-3502
1051998-1
2034-8052-92
2
D
142, 400
1.265 [32.13]
—
—
1
Category A: solder sleeve; Categories B, C and D: crimp sleeve.
2 -92 and -02 indicate passivated stainless steel finish. -00 indicates gold plated finish.
See page 2-4 for description of categories and pages 2-82 to 2-87 for tooling (unless noted otherwise).
2-20
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
SMA Connectors (MIL-PRF-39012) — Panel Mount
Panel Mount
Receptacles
.102 Dia.
[2.59] 4 Plcs.
.102 Dia.
[2.59] 2 Plcs.
OSM
Jack
.375
[9.52]
.481
[12.22] .625
[15.88]
.223
[5.66]
.065
[1.65]
.375
[9.53]
.58
[14.7]
.58
[14.7]
Outline 1
1
Bulkhead Mount
Receptacles
.162
Dia.
[4.11]
2
.035 Max.
[0.89]
Outline 2
Military
Part No.
M39012/60
TE
Part No.
Reference1
Part No.
(Ref. Only)
Outline
-3001
1052924-1
2052-8001-92
1
-3002
1052926-1
2052-8002-92
2
COTS
Part No.
Reference1
Part No.
(Ref. Only)
1052422-1
1052421-1
1052534-1
1052533-1
2052-0000-02
2052-0000-00
2052-1300-02
2052-1300-00
-92 and -02 indicate passivated stainless steel finish. -00 indicates gold plated finish.
.281
[7.14
O-Ring
Lockwasher
.312
Hex.
[7.92]
OSM
Jack
+ .004
– .000
+ 0.10
– 0.00 ]
.437 Hex.
[11.10]
O-Ring
Lockwasher
.312
Hex.
[7.92]
.031 Dia.
[0.79]
.437 Hex.
[11.10]
.031 Dia.
[0.79]
OSM
Jack
.050
Dia.
[1.27]
.003
.125 +– .000
+ 0.08
[3.18 – 0.00 ]
.045–.103
[1.14–2.62]
Panel
Typical
Recommended
Mounting Hole
.050
Dia.
[1.27]
.045–.103
[1.13–2.62]
Panel
.500
[12.70]
.718 Max.
[18.24]
.310
[7.87]
.550
[13.97] .68
[17.3]
Outline 3
1
.050
Dia.
[1.27]
RF Connectors
.340
[8.64]
Typ.
.500 Sq.
[12.70]
.050
Dia.
[1.27]
.065
[1.65]
.035
[0.89]
OSM
Jack
.031 Dia.
[0.78]
Outline 4
Military
Part No.
M39012/61
TE
Part No.
Reference1
Part No.
(Ref. Only)
Outline
COTS
Part No.
Reference1
Part No.
(Ref. Only)
-3001
-3002
1053118-1
1484516-1
2056-8011-92
2058-8012-92
3
4
—
1053133-1
—
2058-0000-00
-92 and -02 indicate passivated stainless steel finish. -00 indicates gold plated finish.
2-21
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
SMA Connectors (MIL-PRF-39012) — For Semi-Rigid Cable
Straight Plugs
.312 Hex.
[7.92]
.312
Hex.
[7.92]
OSM
Plug
OSM
Plug
.330
[8.38]
.44
[11.2]
.218
Dia.
[5.54]
.312
[7.92]
Hex.
OSM
Plug
OSM
Plug
.544
Max.
[14.07]
.76
[19.3]
.568
Max.
[14.43]
Outline 2
Outline 1
.312
Hex.
[7.92]
Outline 3
Outline 4
Military
Part No.
M39012/79
TE
Part No.
Reference4
Part No.
(Ref. Only)
Outline
Category
RG/U
Cable
COTS
Part No.
B3001
1050774-1
2001-8001-92
1
B
405
1050548-1
1050547-1
1050525-1
1050524-1
—
1050598-1
—
—
—
—
—
1050548-1
1050547-1
1050525-1
1050524-1
—
1050744-1
1050598-1
—
—
—
—
—
—
—
—
—
—
B3002
1050776-1
2001-8002-92
1
B
402
B3003
B3003
B3003
B3004
B3004
-3007
-3008
1050777-1
1050813-1
1089686-12
1050779-1
1050792-12
1050781-1
1050783-1
2001-8003-92
2001-8991-92
2001-8203-92
2001-8004-92
2001-8204-92
2001-8007-92
2001-8008-92
3
21
2
3
2
3
3
B
B
B
B
B
E
E
405
405
405
402
402
405
402
*B3101
1050785-1
2001-8101-92
1
B
405
*B3102
1050786-1
2001-8102-92
1
B
402
*B3103
*B3103
*B3103
*B3103
*B3104
*B3104
*B3104
*-3107
*-3108
-3207
*-3307
*-3308
AF8627286-2
1050787-1
1050797-12
1050812-1
227868-13
1050788-1
1050799-1
227743-13
1050789-1
1050790-1
228639-33
228639-13
228634-13
221447-1
2001-8103-92
2001-8303-92
2001-8981-92
—
2001-8104-92
2001-8304-92
—
2001-8107-92
2001-8108-92
—
—
—
—
3
2
21
4
3
2
4
3
3
4
4
4
4
B
B
B
B
B
B
B
E
E
F
F
F
—
405
405
405
405
402
402
402
405
402
405
405
402
405
Reference4
Part No.
(Ref. Only)
2001-5032-02
2001-5032-00
2001-5003-02
2001-5003-00
—
2001-5385-02
—
—
—
—
—
2001-5032-02
2001-5032-00
2001-5003-02
2001-5003-00
—
2001-7685-02
2001-5385-02
—
—
—
—
—
—
—
—
—
—
* No safety wire holes.
1 Low profile version; overall length .393 [9.98] max.
2 OSCC solderless compression crimp version.
3 Use Hand Tool Kit Part Number 59981-1 which includes Die Set Part Number 312253-2 and Locator Part Number
220221-2.
4 -92 and -02 indicate passivated stainless steel finish. -00 indicates gold plated finish.
See page 2-4 for description of categories and pages 2-82 to 2-87 for tooling (unless noted otherwise).
1
DSCC
Part Number
TE
Part No.
Reference1
Part No.
Part No.
Outline
RG/U
Cable
84149SSG
1050605-1
2001-5397-02
1
402
—
—
2001-5003-02
2001-5003-00
COTS
Part No.
Reference1
Part No.
Part No.
84149SSG-1
1050629-1
2001-5557-02
1
402
1050525-1
1050524-1
84149SSGA
1050609-1
2001-5431-02
1
405
—
—
84149SSGA-1
1050631-1
2001-5558-02
1
405
1050770-1
1050769-1
2001-7985-02
2001-7985-00
-02 indicates passivated stainless steel finish. -00 indicates gold plated finish.
2-22
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
SMA Connectors (MIL-PRF-39012) — For Semi-Rigid Cable (Continued)
Right Angle Plugs
OSM
Plug
.67
[17.0]
.54
[13.7]
.330
[8.38]
.670
Max.
[17.02]
.520
[13.21]
Max.
.305
[7.75]
.312 Hex.
[7.92]
2
.554
[14.07]
Max.
.312
Hex.
[7.92]
Outline 1
Military
Part No.
M39012/80
B3003
B3004
Outline 2
1051163-1
1051164-1
Reference2
Part No.
(Ref. Only)
2007-8003-92
2007-8004-92
-3005
1051165-1
2007-8005-92
1
E
405
-3006
1051166-1
2007-8006-92
1
E
402
-3007
1051168-1
2007-8007-92
1
E
405
-3008
1051170-1
2007-8008-92
1
E
402
*B3103
1051173-1
2007-8103-92
1
B
405
*B3104
1051174-1
2007-8104-92
1
B
402
*-3105
1051175-1
2007-8105-92
1
E
405
*-3106
1051176-1
2007-8106-92
1
E
402
*-3107
1051177-1
2007-8107-92
1
E
405
*-3108
1051178-1
2007-8108-92
1
E
402
-3207
*-3307
-3308
228583-3
228583-1
228626-1
—
—
—
2
2
2
F
F
F
405
405
402
TE
Part No.
RF Connectors
Outer
Sleeve
Outline
Category
RG/U
Cable
COTS
Part No.
1
1
B
B
405
402
—
—
1051114-1
1051113-1
1051110-1
1051109-1
1051114-1
1051113-1
1051110-1
1051109-1
1051114-1
1051113-1
1051110-1
1051109-1
1051114-1
1051113-1
1051110-1
1051109-1
1051114-1
1051113-1
1051110-1
1051109-1
—
—
—
Reference2
Part No.
(Ref. Only)
—
—
2007-5055-02
2007-5055-00
2007-5054-02
2007-5054-00
2007-5055-02
2007-5055-00
2007-5054-02
2007-5054-00
2007-5055-02
2007-5055-00
2007-5054-02
2007-5054-00
2007-5055-02
2007-5055-00
2007-5054-02
2007-5054-00
2007-5055-02
2007-5055-00
2007-5054-02
2007-5054-00
—
—
—
* No safety wire holes.
Use Hand Tool Kit Part Number 59981-1 which includes Die Set Part Number 312253-1 and Locator Part Number 312173-1
-92 and -02 indicate passivated stainless steel finish. -00 indicates gold plated finish.
See page 2-4 for description of categories and pages 2-82 to 2-87 for tooling (unless noted otherwise).
1
2
1
DSCC
Part Number
TE
Part No.
Reference1
Part No.
Part No.
Outline
RG/U
Cable
COTS
Part No.
85037SSG
1051119-1
2007-5115-02
1
402
85037SSGA
1051120-1
2007-5116-02
1
405
1051110-1
1051109-1
1051114-1
1051113-1
Reference1
Part No.
Part No.
2007-5054-02
2007-5054-00
2007-5055-02
2007-5055-00
-02 indicates passivated stainless steel finish. -00 indicates gold plated finish.
2-23
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
SMA Connectors (MIL-PRF-39012) — For Semi-Rigid Cable (Continued)
.312
Hex.
[7.92]
Straight Jacks
OSM
Jack
.250
Hex.
[6.35]
.125
Min.
[3.18]
.235
[5.97]
.500
[12.70]
.125
Min.
[3.18]
.713
[18.11]
Outline 1
Military
Part No.
M39012/81
B3001
B3002
-3005
-3006
-3007
-3008
-3207
-3208
.250
Hex.
OSM [6.35]
Jack
OSM
Jack
.631
Max.
[16.03]
Outline 2
TE
Part No.
1050923-1
1050924-1
1050926-1
1050928-1
1050929-1
1050931-1
1050934-11
1050935-11
Reference2
Part No.
(Ref. Only)
2002-8001-90
2002-8002-90
2002-8005-90
2002-8006-90
2002-8007-92
2002-8008-92
2002-8207-92
2002-8208-92
.218
Dia.
[5.54]
Outline 3
Outline
Category
RG/U
Cable
COTS
Part No.
1
1
1
1
2
2
3
3
B
B
E
E
E
E
F
F
405
402
405
402
405
402
405
402
1050859-1
1050854-1
1050859-1
1050854-1
—
—
—
—
Reference2
Part No.
(Ref. Only)
2002-5016-00
2002-5015-00
2002-5016-00
2002-5015-00
—
—
—
—
1
OSCC solderless compression crimp version.
-92 indicates passivated stainless steel finish. -90 and -00 indicate gold plated finish.
See page 2-4 for description of categories and pages 2-82 to 2-87 for tooling.
2
Panel Mount Jacks
.102 Dia.
[2.59] 4 Plcs.
.310 Dia.
[7.87]
OSM
Jack
OSM
Jack
OSM
Jack
.065
[1.65]
.375
[9.53]
.631 Max.
[16.03]
.065
[1.65]
.375
[9.53]
.565 Max.
[14.35]
.340
[8.64]
Typ.
.500
Sq.
[12.70]
Outline 4
Military
Part No.
M39012/82
B3001
B3002
-3005
-3006
-3007
-3008
-3207
-3208
.223
[5.66]
A Dia.
OSM
Jack
.481
.625
[12.22] [15.88]
.065
[1.65]
.102 Dia.
[2.59] 2 Plcs.
.375
[9.53]
.500
[12.70]
Outline 7
TE
Part No.
1051087-1
1051088-1
1051091-1
1051092-1
1051093-1
1051094-1
1051097-11
1051098-11
.218
Dia.
[5.54]
.713
[18.11]
Outline 5
Reference2
Part No.
(Ref. Only)
2006-8001-90
2006-8002-90
2006-8005-90
2006-8006-90
2006-8007-92
2006-8008-92
2006-8207-92
2006-8208-92
.312 Dia.
[7.92]
.065
[1.65]
.375
[9.53]
Outline 6
Outline
Category
RG/U
Cable
COTS
Part No.
4
4
4
4
6
6
5
5
B
B
E
E
E
E
F
F
405
402
405
402
405
402
405
402
1051049-1
1051081-1
1051049-1
1051081-1
—
—
—
—
Reference2
Part No.
(Ref. Only)
2006-5012-00
2006-7941-00
2006-5012-00
2006-7941-00
—
—
—
—
1
OSCC solderless compression crimp version.
-92 indicates passivated stainless steel finish. -90 and -00 indicate gold plated finish.
See page 2-4 for description of categories and pages 2-82 to 2-87 for tooling.
2
1
DSCC
Part Number
TE
Part No.
Reference1
Part No.
Part No.
Outline
RG/U
Cable
COTS
Part No.
Reference1
Part No.
Part No.
85022SSG
1051063-1
2006-5151-00
7
402
—
—
85022SSG-1
1221162-1
2006-5192-00
7
402
1051052-1
2006-5013-00
85022SSGA
1051062-1
2006-5150-00
7
405
—
—
85022SSGA-1
1051067-1
2006-5193-00
7
405
1051046-1
2006-5010-00
-02 indicates passivated stainless steel finish. -00 indicates gold plated finish.
2-24
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
SMA Connectors (MIL-PRF-39012) — For Semi-Rigid Cable (Continued)
Bulkhead Mount Jacks
.004
.281 +– .000
+ 0.10
[7.14 – 0.00 ]
.003
.125 +– .000
+ 0.08
Recommended
Mounting Hole
.055–.103
[1.40–2.62]
Panel
.437 Hex.
[11.10]
.055–.103
[1.40–2.62]
Panel
.415
[10.54]
.500
[12.70]
.75
[19.0]
.437 Hex.
[11.10]
.250 Across
[6.35] Flats
O-Ring
Lockwasher
.312
Hex.
[7.92]
OSM
Jack
.055–.103
[1.40–2.62]
Panel
.450
[11.43]
.850
Max.
[21.59]
Outline 1
Military
Part No.
M39012/83
B3001
B3002
-3005
-3006
-3007
-3008
-3207
-3208
O-Ring
Lockwasher
.312
Hex.
[7.92]
OSM
Jack
Outline 2
TE
Part No.
1051022-1
1051023-1
1051026-1
1051027-1
1051028-1
1051029-1
1051032-11, 2
1051033-11, 2
Reference3
Part No.
(Ref. Only)
2004-8001-90
2004-8002-90
2004-8005-90
2004-8006-90
2004-8007-92
2004-8008-92
2004-8207-92
2004-8208-92
.437 Hex.
[11.10]
2
.218
Dia.
[5.54]
RF Connectors
[3.18 – 0.00 ]
O-Ring
Lockwasher
.312
Hex.
[7.92]
OSM
Jack
.415
[10.54]
.500
[12.70]
.652 Max.2
[16.56]
Outline 3
Outline
Category
RG/U
Cable
COTS
Part No.
1
1
1
1
2
2
3
3
B
B
E
E
E
E
F
F
405
402
405
402
405
402
405
402
1051018-1
1051013-1
1051018-1
1051013-1
—
—
—
1051005-1
Reference3
Part No.
(Ref. Only)
2004-7985-00
2004-7941-00
2004-7985-00
2004-7941-00
—
—
—
2004-7641-02
1
OSCC Solderless Compression Crimp version.
Category F Only: Overall Length; .620 [15.75] Max.
3 -92 and -02 indicate passivated stainless steel finish. -90 and -00 indicate gold plated finish.
See page 2-4 for description of categories and pages 2-82 to 2-87 for tooling.
2
.312
Hex.
[7.92]
Straight Plugs,
without Contact
.368
Max.
[9.35]
Outline 4
Military
Part No.
M39012/92
B3101
-3301
TE
Part No.
227531-12
228635-1
Reference
Part No.
(Ref. Only)
—
—
Outline
Category
RG/U
Cable
4
4
B
F
402
402
2
Use Hand Tool Kit Part Number 59981-1 which includes Die Set Part
Number 312253-1 and Locator Part Number 220220-2.
See page 2-4 for description of categories and pages 2-82 to 2-87 for tooling.
2-25
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
SMA Connectors (MIL-PRF-39012) — Printed Circuit Board Mount
Vertical PCB Jacks
.050
Dia.
[1.27]
OSM
Jack
.040 Sq. Typ.
[1.02] 4 Plcs.
A
.065
[1.65]
.375
[9.53]
.200 Typ.
[5.08]
.250
[6.35]
Sq.
Outline 1
Military
Part No.
M39012/93
TE
Part No.
Reference1
Part No.
(Ref. Only)
Outline
Dimension
A
COTS
Part No.
Reference1
Part No.
(Ref. Only)
-3001
1053372-1
2062-8001-90
1
1053354-1
2062-0000-00
-3002
1053374-1
2062-8002-90
1
—
—
-3003
1053376-1
2062-8003-90
1
.155
3.94
.125
3.18
.093
2.36
—
—
Military
Part No.
M39012/94
TE
Part No.
Reference1
Part No.
(Ref. Only)
Outline
Dimension
A
COTS
Part No.
Reference1
Part No.
(Ref. Only)
-3001
1053396-1
2064-8001-90
2
1053378-1
2064-0000-00
-3002
1053398-1
2064-8002-90
2
—
—
-3003
1053400-1
2064-8003-90
2
.155
3.94
.125
3.18
.093
2.36
—
—
Right Angle PCB Jacks
.380
[9.65]
Max.
.250
[6.35]
.040 Sq. Typ.
[1.02] 4 Plcs.
A
.583
[14.81] .458
[11.63]
.050
Dia.
[1.27]
.250
[6.35]
Sq.
OSM
Jack
.200
Typ.
[5.08]
1
-90 and -00 indicate gold plated finish.
Outline 2
SMA In-Series Adapters (MIL-A-55339)
MIL-A-55339
.635 Max.
[16.13]
.510 Max.
[12.95]
.312
[7.92]
Hex.
OSM
Plug
.585
[14.86]
.459
[11.66]
.330
[8.38]
.375
Hex.
[9.53]
.141–.144
[3.58–3.66]
.312
–32,
[7.92]
UNEF-2A
Thd.
OSM
Jack
.314–.319
Dia.
[7.98–8.10]
.055–.190
[1.40–4.83]
Panel
Recommended
Mounting Hole
OSM
Jack
Outline 1
.312 Hex.
[7.92] Typ.
Lockwasher
Gasket
OSM
Plug
OSM
Jack
.325
.550
[8.26]
[13.97]
.875
[22.23]
.090
[2.29]
.218 Across
[5.54] Flats
.125
[3.18]
Min.
.880
[22.35]
.500
Dia.
[12.70]
Outline 3
Outline 2
.125
[3.18]
OSM
Jack
OSM
Jack
Military
Part No.
M55339
.218 Across
[5.54] Flats
.500
[12.70]
/02-30001
.720
[18.29]
.345
[8.76]
COTS
Part No.
1055091-1
2088-8001-92
1
1055065-1
1055064-1
1054875-1
1054874-1
—
1053635-1
1053634-1
1053635-1
1053634-1
1053489-1
1053488-1
1054986-1
2084-8001-92
2
1054988-1
2084-8002-92
5
/29-30001
1053765-1
2081-8001-92
3
*/29-30101
1053767-1
2081-8101-92
3
/31-30001
1053633-1
2080-8001-92
4
OSM
Jack
.340
[8.64]
Typ.
Outline
/28-30001
.102 Dia.
[2.59] 4 Plcs.
.065
[1.65]
.375
[9.53]
Reference1
Part No.
(Ref. Only)
/28-30002
Outline 4
OSM
Jack
TE
Part No.
Reference1
Part No.
(Ref. Only)
2088-0000-02
2088-0000-00
2084-1100-02
2084-1100-00
—
2081-0000-02
2081-0000-00
2081-0000-02
2081-0000-00
2080-0000-02
2080-0000-00
* No safety wire holes.
-92 and -02 indicate passivated stainless steel finish. -00 indicates gold plated finish.
1
.500 Sq.
[12.70]
Outline 5
2-26
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
OSM
Plug
RF Connectors
SMA Receptacles (MIL-C-83517) — Panel Mount
Panel Mount Jacks,
Solder Tab
.102 Dia.
[2.59] 2 Plcs.
A
Tab Width
OSM
Jack
.481
[12.22]
.625
.241
[15.88]
[6.11]
.002
.005 +– .001
0.05
[0.13 +– 0.03
]
Reference1
Part No.
(Ref. Only)
Outline
-31001
1052928-1
2052-8003-92
1
-31002
.223
[5.66]
.375
[9.53]
Outline 1
.102 Dia.
[2.59] 4 Plcs.
A
Tab Width
OSM
Jack
1052932-1
2052-8004-92
2052-8005-92
2
1052934-1
2052-8006-92
2
-32001
1052927-1
2052-8003-90
1
1052929-1
2052-8004-90
.020
0.51
.050
1.27
.020
0.51
.050
1.27
.020
0.51
.050
1.27
.020
0.51
.050
1.27
1
-31004
-32002
.170
[4.32]Typ.
1052930-1
1
-32003
1052931-1
2052-8005-90
2
-32004
1052933-1
2052-8006-90
2
COTS
Part No.
Reference1
Part No.
(Ref. Only)
±.002
±.051
—
—
±.001
±.025
1052577-1
2052-1658-02
±.001
±.025
1052898-1
1052897-1
1052566-1
1052565-1
2052-5636-02
2052-5636-00
2052-1618-02
2052-1618-00
±.002
±.051
—
—
±.001
±.025
1052577-1
2052-1658-02
1052898-1
1052897-1
1052566-1
1052565-1
2052-5636-02
2052-5636-00
2052-1618-02
2052-1618-00
Dimension
A
±.002
±.051
±.002
±.051
±.001
±.025
2
RF Connectors
.112
[2.84]
+ 0.00
– 0.25 ]
[2.54
TE
Part No.
-31003
.000
.100 +– .010
.065
[1.65]
Military
Part No.
M83517/1
.340
Typ. 1 -92 and -02 indicate passivated stainless steel finish. -90 and -00 indicate gold plated finish.
[8.64]
.002
.005 +– .001
0.05
[0.13 +– 0.03
]
.000
.100 +– .010
+ 0.00
.065
[1.65]
.375
[9.53]
.510 Sq.
[12.95] Max.
[2.54 – 0.25 ]
Outline 2
Panel Mount Plugs,
Solder Tab
.102 Dia.
[2.59] 2 Plcs.
.312 Hex.
[7.92]
OSM
Plug
A Tab
Width
[0.13
+ .002
– .001
+ 0.05
– 0.03 ]
.100
[2.54
.010
0.25]
.005
Ref.
Plane
.065
[1.65]
.390
[9.91]
.528
[13.41] Max.
.481
[12.22]
.625
.241
[15.88]
[6.11]
.130
[3.30]
.102 Dia.
[2.59] 4 Plcs.
.312 Hex.
[7.92]
OSM
Plug
A Tab
Width
.005
Ref.
Plane
.065
[1.65]
.390
[9.91]
.528
[13.41] Max.
.260
[6.60]
Outline 3
1
.170 Typ.
[4.32]
[0.13
.340
[8.64]
Typ.
+ .002
– .001
+ 0.05
– 0.03 ]
.510 Sq.
[12.95] Max.
.100 .010
[2.54 0.25]
Outline 4
Military
Part No.
M83517/2
TE
Part No.
Reference1
Part No.
(Ref. Only)
Outline
-31001
1052409-1
2051-8001-92
3
-31002
1052411-1
2051-8002-92
3
-31003
1052413-1
2051-8003-92
4
-31004
1052415-1
2051-8004-92
4
Military
Part No
M83517/2
TE
Part No.
Reference1
Part No.
(Ref. Only)
Outline
±.002
±.051
-32001
1052408-1
2051-8001-90
3
±.001
±.025
-32002
1052410-1
2051-8002-90
3
±.002
±.051
-32003
1052412-1
2051-8003-90
4
±.001
±.025
-32004
1052414-1
2051-8004-90
4
Dimension
A
.020
0.51
.050
1.27
.020
0.51
.050
1.27
Dimension
A
.020
0.51
.050
1.27
.020
0.51
.050
1.27
±.002
±.051
±.001
±.025
±.002
±.051
±.001
±.025
-92 indicates passivated stainless steel finish.
-90 indicates gold plated finish.
2-27
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
SMA Receptacles (MIL-C-83517) — Panel Mount (Continued)
Panel Mount Jacks,
Slotted Contact
OSM
Jack
.050 .001 Dia.
[1.27 0.03]
OSM
Jack
A Slot
Width
.050 .010
[1.27 0.25]
.162 .002
[4.11 0.05]
.065
[1.65]
.625
[15.88]
.223
[5.66]
.375
[9.53]
.630 .010
[16.00 0.25]
Outline 1
.241
[6.11]
.481
[12.22]
.100 .005
[2.54 0.13]
.035 .010
[0.89 0.25]
A Slot Width
.065
[1.65]
.375
[9.53]
.102 Dia.
[2.59] 2 Plcs.
.050 .001
[1.27 0.03]
.112
[2.84]
Outline 2
.102 Dia.
[2.59] 4 Plcs.
A Slot
Width
OSM
Jack
.170 Typ.
[4.32]
.340
[8.64]
Typ.
.065
[1.65]
.375
[9.53]
.050 .010
[1.27 0.25]
Dia.
.510 Sq.
[12.95] Max.
.050 .010
[1.27 0.25]
Dia.
Outline 3
1
Military
Part No.
M83517/3
TE
Part No.
Reference1
Part No.
(Ref. Only)
Outline
-31001
1052936-1
2052-8007-92
1
-31002
1052938-1
2052-8008-92
1
-31003
1052940-1
2052-8009-92
1
-31004
1052942-1
2052-8010-92
3
-31005
1052944-1
2052-8011-92
3
-31006
1052946-1
2052-8012-92
3
-31007
1052948-1
2052-8013-92
2
-32001
1052935-1
2052-8007-90
1
-32002
1052937-1
2052-8008-90
1
-32003
1052939-1
2052-8009-90
1
-32004
1052941-1
2052-8010-90
3
-32005
1052943-1
2052-8011-90
3
-32006
1052945-1
2052-8012-90
3
-32007
1052947-1
2052-8013-90
2
Dimension
A
.012 +.003/–.001
0.30 +0.08/–0.03
.018 +.003/–.001
0.46 +0.08/–0.03
.028 +.003/–.001
0.71 +0.08/–0.03
.012 +.003/–.001
0.30 +0.08/–0.03
.018 +.003/–.001
0.46 +0.08/–0.03
.028 +.003/–.001
0.71 +0.08/–0.03
.025 ±.002
0.64 ±0.05
.012 +.003/–.001
0.30 +0.08/–0.03
.018 +.003/–.001
0.46 +0.08/–0.03
.028 +.003/–.001
0.71 +0.08/–0.03
.012 +.003/–.001
0.30 +0.08/–0.03
.018 +.003/–.001
0.46 +0.08/–0.03
.028 +.003/–.001
0.71 +0.08/–0.03
.025 ±.002
0.64 ±0.05
COTS
Part No.
Reference1
Part No.
(Ref. Only)
1251095-1
2052-1650-02
—
—
—
—
—
—
1052563-1
2052-1612-02
—
—
—
—
1251095-1
2052-1650-02
—
—
—
—
—
—
1052563-1
2052-1612-02
—
—
—
—
-92 and -02 indicate passivated stainless steel finish. -90 indicates gold plated finish.
2-28
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
SMA Receptacles (MIL-C-83517) — Panel Mount (Continued)
Panel Mount Jacks,
Contact Post
.102 Dia.
[2.59] 4 Plcs.
.010 .002 Dia.
[0.25 0.05]
OSM
Jack
.340 Typ.
[8.64]
.065
[1.65]
.162
[4.11
.002
0.05]
.375
[9.53]
.050 .010
[1.27 0.25]
.170 Typ.
[4.32]
.510 Max.
[12.95] Sq.
A
Outline 2
.102 Dia.
[2.59] 4 Plcs.
.010 .002 Dia.
[0.25 0.05]
Dia.
OSM
Jack
.065
[1.65]
RF Connectors
.050 .001 Dia.
[1.27 0.03]
OSM
Jack
2
.085 .002 Dia.
[2.16 0.05]
.590 .010
[14.99 0.25]
.481
[12.22]
.375
[9.53]
1.080 .010
[27.43 0.25]
.085 .002 Dia.
[2.16 0.05]
.065
[1.65]
Outline 1
.050 .010
[1.27 0.25]
.375
[9.53]
A
.223
[5.66]
.241
[6.11]
.625
[15.88]
.112
[2.84]
Outline 3
1
Military
Part No.
M83517/4
TE
Part No.
Reference1
Part No.
(Ref. Only)
Outline
-31001
1052950-1
2052-8014-92
3
-31002
1052952-1
2052-8015-92
3
-31003
1052954-1
2052-8016-92
2
-31004
1052956-1
2052-8017-92
2
-31005
1052958-1
2052-8018-92
1
-32001
1052949-1
2052-8014-90
3
-32002
1052951-1
2052-8015-90
3
-32003
1052953-1
2052-8016-90
2
-32004
1052955-1
2052-8017-90
2
-32005
1052957-1
2052-8018-90
1
Reference1
Part No.
(Ref. Only)
.057
1.45
.125
3.18
.057
1.45
.125
3.18
±.003
±.076
—
—
±.003
±.076
1052902-1
1052901-1
2052-5674-02
2052-5674-00
±.003
±.076
—
—
1052528-1
1052527-1
1052523-1
1052522-1
2052-1215-02
2052-1215-00
2052-1201-02
2052-1201-00
±.003
±.076
—
—
±.003
±.076
1052902-1
1052901-1
2052-5674-02
2052-5674-00
±.003
±.076
N/A
.057
1.45
.125
3.18
.057
1.45
.125
3.18
±.003
±.076
±.003
±.076
N/A
—
—
1052528-1
1052527-1
1052523-1
1052522-1
2052-1215-02
2052-1215-00
2052-1201-02
2052-1201-00
-92 and -02 indicate passivated stainless steel finish. -90 and -00 indicate gold plated finish.
Panel Mount Plugs,
Contact Post
.102 Dia.
[2.59] 4 Plcs.
.170 Typ.
[4.31]
.162 .002
[4.11 0.05]
Dia.
OSM
Plug
COTS
Part No.
Dimension
A
.340
Typ.
[8.64]
Ref.
Plane
.065
[1.65]
.390
[9.91]
.528 Max.
[13.41]
.997 Ref.
[25.32]
Military
Part No.
M83517/5
-31001
-32001
.050 .001
[1.27 0.03]
Dia.
.330 .010
[8.38 0.25]
.510 Max.
[12.95] Sq.
.490 .010
[12.45 0.25]
1
TE
Part No.
1052417-1
1052416-1
Reference1
Part No.
(Ref. Only)
2051-8005-92
2051-8005-90
Outline
4
4
-92 indicates passivated stainless steel finish.
-90 indicates gold plated finish.
Outline 4
2-29
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
SMA Receptacles (MIL-C-83517) — Surface Launch
Surface Launch Jacks
.086 [2.18]-56,
UNC-2B
8 Plcs.
.050 .001 Dia.
[1.27 0.03]
OSM
Jack
.085
[2.16]
.375
[9.53]
.072 .004 Dia.
[1.83 0.10]
.010 .002
[0.25 0.05]
A
.438
Dia.
[11.13]
Military
Part No.
M83517/6
TE
Part No.
-31001 1053423-1
-31002 1053425-1
.570 Dia.
[14.48] Max.
1
Outline 1
Reference1
Part No.
(Ref. Only)
Outline
2066-8001-92
1
2066-8002-92
1
-32001 1053422-1
2066-8001-90
1
-32002 1053424-1
2066-8002-90
1
COTS
Part No.
Reference1
Part No.
(Ref. Only)
±.003
±0.08
—
—
±.003
±0.08
1053415-1
2066-1403-00
±.003
±0.08
—
—
±.003
±0.08
1053415-1
2066-1403-00
Dimension
A
.060
1.52
.120
3.05
.060
1.52
.120
3.05
-92 indicates passivated stainless steel finish. -90 and -00 indicate gold plated finish.
Surface Launch Plugs
.050 .001 Dia.
[1.27 0.03]
.072 .004
[1.83 0.10]
Dia.
OSM
Plug
Ref.
Plane
.085
[2.16]
.390
[9.91]
.528 Max.
[13.41]
.086 [2.18]-56,
UNC-2B
8 Places
.010 .002
[0.25 0.05]
.483
Dia.
[11.13]
A
.570 Dia.
[14.48] Max.
1
Outline 2
Surface Launch
Right Angle Jacks
.480
Max.
[12.19]
.340
[8.63]
.085
[2.16]
Military
Part No.
M83517/7
TE
Part No.
Reference1
Part No.
(Ref. Only)
Outline
-31001
1053429-1
2067-8001-92
2
-31002
1053431-1
2067-8002-92
2
-32001
1053428-1
2067-8001-90
2
-32002
1053430-1
2067-8002-90
2
.060
1.52
.120
3.05
.060
1.52
.120
3.05
±.003
±0.08
±.003
±0.08
±.003
±0.08
±.003
±0.08
-92 indicates passivated stainless steel finish. -90 indicates gold plated finish.
.570 Dia.
[14.48] Max.
A
Mounting Plane
.010 .002
[0.25 0.05]
.015
[0.38]
Min.
.072 .004 Dia.
[1.83 0.10]
.475 Max.
[12.07]
Dimension
A
.438 Dia.
[11.13]
.100 Max.
[2.54]
.0355–.0370 Dia.
[0.902–0.940]
.086 [2.18]-56,
.015 Max.
UNC-2B
[0.38] Flat
8 Places
See Detail
.050 .001 Dia.
[1.27 0.03]
OSM
Jack
Detail Transition End
Outline 3
Military
Part No.
M83517/8
TE
Part No.
-31001 1053451-1
-31002 1053453-1
-32001 1053450-1
-32002 1053452-1
1
Reference1
Part No.
(Ref. Only)
Outline
2068-8001-92
3
2068-8002-92
2068-8001-90
2068-8002-90
3
3
3
COTS
Part No.
Reference1
Part No.
(Ref. Only)
±.003
±0.08
1053438-1
2068-5156-00
±.003
±0.08
—
—
±.003
±0.08
1053438-1
2068-5156-00
±.003
±0.08
—
—
Dimension
A
.060
1.52
.120
3.05
.060
1.52
.120
3.05
-92 indicates passivated stainless steel finish. -90 and -00 indicate gold plated finish.
2-30
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
SMA Receptacles (MIL-C-83517) — End Launch
End Launch Jacks
.090 .003 Dia. Thru
[2.29 0.08] 2 Plcs.
.230
[5.84]
OSM
Jack
.562
[14.27]
A
.375
[9.53]
BSC
.375
[9.53]
.109
BSC
[2.77]
2
.601 .010
[15.27 0.25]
Mounting Hole Pattern
RF Connectors
.002
.005 +– .001
+ 0.05 Thick x
[0.13 – 0.03 ]
.100 .010 Long x
[2.54 0.25]
B Tab Width
.375
[9.53]
Outline 1
.090 .003 Dia. Thru
[2.29 0.08] 2 Plcs.
.000
.250 +– .005
.230
[5.84]
OSM
Jack
.767
[19.48]
.580
[14.73]
BSC
+ 0.00
[6.35 – 0.13 ]
.375
[9.53]
.010
[0.25]
.109 BSC
[2.77]
.375
[9.53]
.601 .010
[15.27 0.25]
Mounting Hole Pattern
.002
.005 +– .001
+ 0.05 Thick x
[0.13 – 0.03 ]
.100 .010 Long x
[2.54 0.25]
.050 .001 Tab Width
[1.27 0.03]
Outline 2
1
Military
Part No.
M83517/9
TE
Part No.
Reference1
Part No.
(Ref. Only)
Outline
Dimension
A
Dimension
B
-31001
1053476-1
2070-8001-92
1
-31002
1053478-1
2070-8002-92
1
-31003
1053480-1
2070-8003-92
1
-31004
1053482-1
2070-8004-92
2
-32001
1053475-1
2070-8001-90
1
-32002
1053477-1
2070-8002-90
1
-32003
1053479-1
2070-8003-90
1
-32004
1053481-1
2070-8004-90
2
.057–.064
1.45–1.63
.120–.127
3.05–3.23
.245–.250
6.22–6.35
N/A
.057–.064
1.45–1.63
.120–.127
3.05–3.23
.245–.250
6.22–6.35
N/A
.025 ± .002
0.64 ± 0.05
.050 ± .001
1.27 ± 0.03
.050 ± .001
1.27 ± 0.03
N/A
.025 ± .002
0.64 ± 0.05
.050 ± .001
1.27 ± 0.03
.050 ± .001
1.27 ± 0.03
N/A
COTS
Part No.
Reference1
Part No.
(Ref. Only)
—
—
1053465-1
2070-5068-02
1053467-1
2070-5069-02
—
—
—
—
1053465-1
2070-5068-02
1053467-1
2070-5069-02
—
—
-92 and -02 indicate passivated stainless steel finish. -90 indicates gold plated finish.
2-31
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
SMA Receptacles (MIL-C-83517) — Field Replaceable Launchers
Field Replaceable
Launchers
.065 .010
[1.65 0.25]
.102 Dia.
[2.59] 2 Plcs.
.375
[9.53]
OSM
Jack
.223 .010
[5.66 0.25]
.112
[2.84]
.065 .010
[1.65 0.25]
.340 Typ.
[8.63]
.625 .010
[15.88 0.25]
.4810
[12.217]
.510 Max. Sq.
[12.95]
.375
[9.53]
OSM
Jack
.2405
[6.109]
.170 Typ.
[4.32]
.102 Dia.
[2.59] 4 Plcs.
Outline 1
Outline 2
.100 .010
[2.54 0.25]
.002
.005 +– .001
.002
x
+ 0.05 A [ 0.05]
[0.13 – 0.03 ]
.075
[1.91]
.015 Max.
[0.38] Flat
.015
Min.
[0.38]
.0355–.0370 Dia.
[0.902–0.940]
Transition Pin Detail
Military
Part No.
M83517/10
-31001
-31003
1052959-1
1052962-1
Reference1
Part No.
(Ref. Only)
2052-8019-92
2052-8021-92
-31005
1052963-1
2052-8023-92
1
-31006
1484518-1
2052-8024-92
1
-31015
1484519-1
2052-8033-92
2
-31016
1484520-1
2052-8034-92
2
-32001
-32003
1484521-1
1052961-1
2052-8019-90
2052-8021-90
1
2
-32005
1484522-1
2052-8023-90
1
-32006
1484523-1
2052-8024-90
1
-32015
1484524-1
2052-8033-90
2
-32016
1484525-1
2052-8034-90
2
1
TE
Part No.
Outline
Dimension
A
COTS
Part No.
1
2
—
—
.020 ± .002
0.51 ± 0.05
.050 ± .002
1.27 ± 0.05
.020 ± .002
0.51 ± 0.05
.050 ± .002
1.27 ± 0.05
—
—
.020 ± .002
0.51 ± 0.05
.050 ± .002
1.27 ± 0.05
.020 ± .002
0.51 ± 0.05
.050 ± .002
1.27 ± 0.05
1052646-1
1052643-1
Reference1
Part No.
(Ref. Only)
2052-3359-02
2052-3358-02
—
—
—
—
1052643-1
2052-3358-02
—
—
1052646-1
1052643-1
2052-3359-02
2052-3358-02
—
—
—
—
—
—
—
—
-92 and -02 indicate passivated stainless steel finish. -90 indicates gold plated finish.
2-32
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Between Series Adapters
.187 Acc.
[4.75] Panel
TNC
Jack
See Part Numbers
SMA
Jack
.437
Dia.
[11.10]
.093
[2.36]
.312
[7.92]
2
1.000
[25.40]
RF Connectors
.500
[12.70]
Typ.
.687
Sq.
[17.45]
Outline 78
.312
Hex.
[7.92]
SMA
Plug
Type N
Plug
.668
[16.97]
.562
[14.27]
1.281
[32.54]
.828
Dia.
[21.03]
Outline 80
SMA
Jack
OSN
Plug
.679
[17.20]
1.281
Max.
[32.50]
.562
[14.27]
.828
Dia.
[21.03]
Outline 83
DSCC
Part Number
8501814FP-11
8501814FP-22
8604412SP-1
8604412SP-4
1
2
Reference
Part Number
(Ref. Only)
3180-4034-021
3180-4036-022
3081-4002-02
3082-4031-02
Outline
Description
TE
Part Number
78
78
80
83
SMA Jack to TNC Jack
SMA Jack to TNC Jack
SMA Plug to Type N Plug
Type N Plug to SMA Jack
1057848-1
1080294-1
1057371-1
1057403-1
.125 [3.20] Dia. Typ. (4 Plcs.)
Tapped holes to accommodate 3-56 UNF mounting screws.
* Defense Electronics Supply Center, Dayton, Ohio
2-33
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Between Series Adapters (Continued)
Gasket
Mounting Nut
See Part Numbers
Lockwasher
Type N
Jack
.625-24 UNEF
-2A Thd.
SMA
Jack
SMA
Jack
Type N
Jack
.630 Dia.
[16.00] Max.
.531 Across
[13.49] Flats
.187 Max.
[4.75] Panel
.250 Max.
[6.35] Panel
.719
Typ.
[18.26]
1.234
[31.34]
.867
[22.02]
.867
[22.02]
1.000
Sq.
[25.40]
.750
Hex.
[19.05]
1.232
[31.29]
Outline 84
Outline 85
See Part Numbers
Type N
Jack
SMA
Jack
.630 Dia.
[16.00] Max.
.187 Max.
[4.75] Panel
.312
Hex.
[7.92]
.719
Typ.
[18.26]
1.279
[32.49]
1.000
Sq.
[25.40]
Outline 86
DSCC
Part Number
8503812FP-11
8503812FP-22
8503812FP-3
8503812FP-41
8503812FP-52
8503812FP-61
8503812FP-72
1
2
Reference
Part Number
(Ref. Only)
3080-4010-021
3080-4015-022
3084-4001-00
3082-4028-021
3082-4029-022
3080-4019-021
3080-4020-022
Outline
Description
TE
Part Number
84
84
85
86
86
84
84
SMA Jack to Type N Jack
SMA Jack to Type N Jack
SMA Jack to Type N Jack
SMA Plug to Type N Jack
SMA Plug to Type N Jack
SMA Jack to Type N Jack
SMA Jack to Type N Jack
1057354-1
1057357-1
1057465-1
1057402-1
1252992-1
1057359-1
1087866-1
.125 [3.20] Dia. Typ. (4 Plcs.)
Tapped holes to accommodate 3-56 UNF mounting screws.
* Defense Electronics Supply Center, Dayton, Ohio
2-34
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
SMPM Micro-Miniature Push-on Coaxial Connectors
Product Facts
■
Push-on style interconnect,
allowing control of the
mating forces when mating
multiple connectors
■
30% smaller than SMP
interconnects
■
Complies with MIL-STD-348A
2
RF Connectors
Description
Product Offering
A high performance microminiature, push-on coaxial
interconnect system.
■
Shrouds; flange mount,
thread-in and press-in
(full detent and smooth
bore)
■
Hermetic shrouds (single
and dual positions)
■
Edge mount PCB shrouds
■
Thru-hole mount PCB
shrouds
■
Surface mount PCB
shrouds (full detent,
smooth bore and
catcher's mitt designs)
Extremely small size
interconnection that offers a
versatile solution for high
density packaging,
allowing center-to-center
spacing of 0.135".
Applications
Military and Aerospace
applications for communications, radar systems,
antennas.
Industrial applications that
require a rugged, densely
packaged RF interconnect
system.
■
Adapters, custom lengths
and spring loaded
options
■
Straight and right-angle
jacks for .047 cable
Electrical Performance
VSWR — 1.50:1 max to 40 GHz
Impedance — 50 ohm
Contact Resistance — Center - 6
milliohms max, Outer - 2 milliohms max.
Insulation Resistance —
5000 megohms min.
Dielectric Withstanding Voltage —
225 Vrms min.
Insertion Loss — 0.12 dB max. typical
Mechanical
Force to Engage — 4.5 lbs. typical
full detent; 2.5 lbs. typical smooth bore
Force to Disengage — 6.5 lbs.
typical full detent; 1.5 lbs. typical
smooth bore
Radial Misalignment — ±.010”
Vibration — EIA-364-28,
Test condition III
Mechanical Shock — EIA-364-27,
Method G
Durability — EIA-364-9,
100 cycles min.
Material and Finish
Housings and Center Contacts —
Beryllium Copper per ASTM-B-196;
gold plate over nickel plate
Dielectric — PTFE Fluorocarbon per
ASTM-D-1457
Shrouds — Stainless steel per
ASTM-A582 Type 303; passivate per
ASTM-A380
Hermetic Seal — Glass bead
Standards and Specifications
MIL-STD-348A
General Specifications
Temperature Range —
-55 to +125 °C
Voltage Rating — 150 volts AC
Environmental Performance
Thermal Shock — EIA-364-32,
5 cycles
Humidity-temperature — EIA-364-31
Method III, 10 cycles
Salt Spray Corrosion — EIA-364-26,
Condition B
Temperature Life — EIA-364-17,
Method A, test condition 5
2-35
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
SMPM Micro-Miniature Push-on Coaxial Connectors (Continued)
Vertical Through-Hole PCB Mount — Part No. 1757644-1
.265
[6.73]
.145
[3.68]
.290
[7.37]
PCB Body
Female Bullet Adapter — Part No. 1757256-1
SMPM Female Interface
per MIL-STD-348
TO Accept
.011-.013 [0.28-0.33] Pin
Ø.020±.002
[0.51±0.05]
4 Plc.
.096
[2.44]
5 Plc.
.100
[2.54]
Dielectric
Ø.024±.001
[0.61±0.02]
Ø.042±.003
[1.07±0.07]
4 Plc.
Contact
.179
[4.55]
.100
[2.54]
Jack to Jack, Adapter, Spring Bullet — Part No. 1757257-1
PCB Edge Mount — Part No. 1757640-1 Full Detent
1757640-2 Smooth Bore
.180
[4.57]
.120
[3.05]
.050
[4.57]
.003±.003 [.08±.08]
2 Plc.
.109
[2.77]
Body
.492±.006
[12.50±.15]
Ø.176 [4.47]
.138
[3.51]
Dielectric
Ø.012±.001
[0.3±0.02]
Cable Jack, Straight — Part No. 1757642-1 — .047 dia. cable
1996328-1 — .086 dia. cable
.069
[1.75]
Contact
.134
[3.40]
.063±.002
[1.6±0.05]
.124±.003
[3.15±.08]
.051±.002
[1.3±.05]
.092±.001
[2.34±.03]
PCB Surface Mount, Smooth Bore — Part No. 1757253-1 Smooth Bore
1757254-1 Full Detent
.113
[2.87]
Ø.0187
[4.75]
.113
[2.87]
.115±.002
[2.92±.05]
.260
[6.6]
Cable Jack, Right-Angle — Part No. 1757643-1 — .047 dia. cable
.202
[5.13]
.156
[3.96]
Square
.122
[3.10]
PCB Surface Mount, — Part No. 1757639-1 Full Detent
Through-hole Legs
.108
[2.74]
.110
[2.79]
.150
[3.81]
.080
[2.03]
.060±.008
[1 52± 20]
Cable Jack, Right-Angle — Part No. 1757638-1 — .047 dia. cable
.180
[4.57]
.072±.003
[1.83±.08]
Hermetic Smooth Bore
Part No. 1663433-1
Hermetic, Smooth Bore, 2 Pos.
Part No. 1663434-1
.083
[2.11]
Typ.
.143
[3.63]
Ref.
.255
[6.48]
.060±.002
[1.52±.05] Typ.
.125
[3.17]
.010
[.24]
Typ.
.138
[3.51]
Ø.100
[2.54]
2 Plc.
.132±.002
[3.35±.05]
.108±.002
[2.74±.05]
.060±.002
[1.53±.05]
Ø.125
[3.18]
.012
[.30]
Typ.
.142
[3.61]
.051±.002
[1.29±.05]
CABLE ENTRY
.010
[.25]
.020
[.51]
4 Plc.
.009
[.23]
4 Plc.
.156
[3.96]
Ø.012
[.30]
.012
[.30]
.017
[.43]
Typ.
2-36
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
Multi-position Backplane RF Modules
Product Facts
Modular design permits
application specific
configuration with high RF
contact count
■
Float mounted jack
maintains positive RF
ground
■
.240 center-to-center
spacing
■
High channel to channel
isolation
■
4 and 8 position modules
are designed to meet the
requirements of VITA 67.1
and VITA 67.2
■
RF contacts are available
for a variety of low loss
cables
Compliant pin backplane
contacts are available
■
RF cable assemblies
2
RF Connectors
■
Description
Modular, high density,
blind-mate RF backplane
connection system combining
a high performance, broad
bandwidth multi-position RF
interconnect in a customer
configurable platform.
Applications
■
Backplane/daughter card
applications
■
Electronic countermeasure
systems
■
Land & sea anti-ballistic
signal processing
■
UAV electronic sensing
and processing
■
Avionics & ground based
radar systems
■
Ground base stations &
communication systems
■
Central computing,
satellite on-board &
ship-board computing
Standards & Specs
Materials and plating
meet the requirements of
MIL-PRF-39012
Designed to meet the
vibration, environmental
and corrosion resistance
requirements of ANSI/VITA 47
Designed and qualified
IAW VITA 67.0; VITA 67.1
and VITA 67.2
Product Specification:
108-2443
IS Sheet: 408-10387
Test Report: 501-748
Materials
Center Contacts: Beryllium
copper, gold plated
Connector Housings:
Beryllium copper, gold
plated
Module Body: Type 303
Corrosion resistant steel,
with passivation treatment
and aluminum alloy 6061T6, with Trivalent chromate
conversion coating
Springs: Nickel plated
music wire or Type 316
corrosion resistant steel,
with passivation treatment
Insulators: PTFE
Mechanical
Durability: EIA-364-9, 500
mating cycles (smooth
bore)
Vibration: EIA-364-28, Test
Condition III
Mechanical Shock:
EIA-364-27, Method G
Operating Temperature:
-55˚C to +85˚C
Humidity/Temperature
Cycling: EIA-364-31,
Method III
Physical or Other
Properties
Misalignment: Axial float:
.079 (2.0mm) min.
Radial Misalignment:
+/- .010 min.
Force to Engage:
18.75 N (4.2 lbf) typical
Force to Disengage:
3.25 N (0.73 lbf) typical
Float Mount Preload:
0.52 N (2.3 lbf) lbs. typical
Float Mount Force at Full
Deflection: 20.0 N (5.0 lbf)
lbs. typical
SMPM RF contact interfaces IAW MIL-STD-348
Note: all values are typical for a single RF contact.
2-37
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
Multi-position Backplane RF Modules (Continued)
Electrical
Part Dimensions
Impedance — 50 ohm
Frequency — P.C.B. Mounted
Contacts - DC — 6.0 GHz
Semi-Rigid Cable Contacts - DC —
26.5 GHz
Flexible Cable Contacts - DC — 20 GHz
VSWR — 1.15:1 to 20 Ghz; 1.25 max.
to 26.5 GHz
Insertion Loss — .12 sqrt f (GHz) dB
max.
Insulation Resistance — 5000
megaohms min.
DWV @ Sea Level — 325 Vrms min.
Contact Resistance — Center
6 milliohms max., outer 2 milliohms max.
Isolation (Channel to Channel) —
SHF (3-30 GHz): >100 dB
VHF/UHF (30 MHz-3 GHz): >120 dB
HF (3-30 MHz): >140 dB
RF Power @ 105 C (C.W. Ave.) —
VHF/UHF/SHF (30 MHz-30GHz):
>20 dBm
HF (3-30 MHz): >30 dBm
Dimensions are in inches
Note: The maximum operating
frequency is limited by the specifications
of the selected cable.
4 Position
Part Number 1996883-4 — VITA 67.1 Daughter Card Module
Part Number 1996884-1 — VITA 67.1 Backplane Module
Part Number 1996884-1
8 Position
Part Number 1996705-4 — VITA 67.2 Daughter Card Module
Part Number 1996706-1 — VITA 67.2 Backplane Module
SMPM Contacts for Daughtercard modules:
.047 semi-rigid cable: 1996771-1
.086 semi-rigid cable: 1996390-1
Consult TE for flexible cable/contact compatibility
Note: Other configurations and options are available, contact TE.
2-38
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
SMP Micro-Miniature Push-On Coaxial Connectors
Features
■
Intermateable with Gilbert
GPO™ Series
■
Enhanced performance
features
■
Simplified Assembly
■
DSCC Approved
2
RF Connectors
SMP micro-miniature
push-on coaxial connectors
provide solutions for today’s
modular designs with
denser packaging requirements. The extremely small
size of the SMP offers a
versatile solution for high
density packaging allowing
connector center-to-center
spacing of 0.17 [4.32]. The
push-on interface facilitates
easier assembly and test
with a positive snap-in
feature to indicate a fully
mated connection. The
rugged SMP interface can
better withstand harsh
environments of mechanical
shock and vibration,
typically found in military or
aerospace related applications. This SMP connector
interface is the standard
used by Defense
Electronics Supply Center
(DSCC) to generate the
SMP push-on connector
series. For DSCC Part
Numbers, see page 2-31.
SMP connectors can be
your design solution for
mechanical packaging and
frequency response. The
SMP interface provides
0.010" of radial misalignment for critical blindmate
applications. Mating forces
are strictly controlled for reliable connections per
mated pair or when
simultaneously mating
multiple connectors. Cable
jacks include an anti-rocking ring for reliable mechanical performance for harsh
operating environments.
SMP connectors offer
enhanced broadband
VSWR performance of
1.15:1 max thru 26.5GHz
and 1.70:1 max thru 40GHz.
Standard design SMP
configurations include
cable connectors, straight
and right-angle, for 0.047
and 0.085 semi-rigid cable,
full detent, limited detent
and smooth bore mating
shrouds that can be bulkhead or flange mounted
and glass feedthroughs
for coax to circuit launchers. In-series adapters for
module-to-module intermating and between series
adapters for integrating
or testing systems or
components parameters.
SMP Shroud and Jack-to-Jack
Adapter Assembly
Gilbert GPO Series — Trademark of
Corning Incorporated
2-39
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
SMP Micro-Miniature Push-On Coaxial Connectors (Continued)
Specifications
General
Materials and Finishes
Housings and Center Contacts
Dielectric
Shrouds
Hermetic Seal
Beryllium Copper per ASTM-B-196; gold plate over nickel plate
PTFE Fluorocarbon per ASTM-D-1457
Stainless steel per ASTM-A582 Type 303; passivate per ASTM-A380
Glass bead
Electrical
Frequency Range
VSWR
dc - 40.0 GHz
1.10:1 Maximum dc - 23.0 GHz
1.15:1 Maximum 23.0 - 26.5 GHz
1.70:1 Maximum 40.0 GHz
335 Vrms maximum at sea level
Voltage Rating
Insertion Loss
Insulation Resistance
Dielectric Withstanding Voltage
RF High Potential
Impedance
RF Leakage
Contact Resistance
0.10 f √ (GHz) dB
5000 megohms minimum
500 volts (VRMS minimum)
325 volts (VRMS minimum) @ 5 MHz
50 ohms nominal
-80dB to 3 GHz, -65dB from 3 to 26.5 GHz minimum
Initial center contact 6.0 milliohms maximum
Outer contact 2.0 milliohms maximum
Mechanical
100 mating cycles minimum - (full detent)
±0.010 minimum
.000/.010
full detent
15.0 lbs. maximum
limited detent
10.0 lbs. maximum
smooth bore
2.0 lbs. maximum
full detent
5.0 lbs. minimum
limited detent
2.0 lbs. minimum
smooth bore
0.5 lbs. minimum
1.5 lbs. minimum axial force
Durability
Radial Misalignment
Axial Misalignment
Force to Engage
Force to Disengage
Center Contact Retention
Environmental
Operating Temperature
Vibration
Shock
Thermal Shock
Moisture Resistance
megohms
-85°F to +329°F [-65°C to +165°C]
per MIL-STD-202, method 204, test condition D
per MIL-STD-202, method 213, test condition I
per MIL-STD-202, method 107, test condition B
per MIL-STD-202, method 106, except step 7b shall be omitted. Resistance shall be 1000
within 5 minutes after removal from humidity.
Interface Dimensions
Jack
Shroud
EMI Ring
.132
[3.35]
Min.
.145 Dia.
[3.70] Max.
Full Detent
.110±.002
[2.80±.050]
.135 Dia.
[3.43] Max.
.142±.003 Dia.
[3.60±.08]
.116±.002 Dia.
[2.95±.05]
Anti-Rock Ring
Bullet
.112
[2.84]
Min.
Smooth Bore
.135 Dia.
[3.43] Max.
.125±.002 Dia.
[3.18±.05]
Note: These dimensions comply with MIL-STD-348.
2-40
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
SMP Micro-Miniature Push-On Coaxial Connectors (Continued)
Jacks (Continued)
Straight Cable Jack, Solder
Attachment
.250
[6.40]
Cable
.133 Dia.
[3.40] Max.
EMI Ring
Part
No.
1056521-1
DSCC
Part No.
94008ZCG-2
2902-5006-62
1056522-1
94008ZCG-1
2
Anti-Rock Ring
.230
Max.
[5.80]
.161
[4.10]
Max.
B
Dim.
A
.190
.047 Semi-Rigid 4.80
.085 Semi-Rigid .209
(RG-405)
5.30
Cable
A
RF Connectors
Right-Angle Cable
Jack, Solder Attachment
.047 Semi-Rigid
.085 Semi-Rigid
(RG-405)
.133
Dia.
[3.40]
Reference
Part No. (Ref. only)
2902-5005-62
Dim. Reference Part
Part
DSCC
B
No. (Ref. only)
No.
Part No.
.230
5.80 2908-5006-62 1056550-1 94008ZCG-4
.265 2908-5007-62 1056551-1 94008ZCG-3
6.70
EMI Ring
Anti-Rock
Ring
.135 Dia.
[3.40] Max.
Jack to Jack Adapter (Bullet)
Dim.
L
.254
6.45
.397
10.07
.2525–.2555
L
[6.40–6.50]
.133
Dia.
[3.40]
.135 Dia.
[3.40] Max.
Reference Part
No. (Ref. only)
Part
No.
DSCC
Part No.
2980-5004-62
1056703-1
94007ZCG-1
2980-5005-62
1757023-1
94007ZCG-2
Jack to Jack Adapter (SMP)
.397
[10.07]
.113
[2.86]
.254
[6.45]
DSCC Part No.
94007ZCG-2
Ø .135 Max.
[3.43] 2 Plcs.
RG/U Cable
—
Part No.
1757023-1
Ø .133 .002
[3.38 0.05]
Shrouds
Shroud — Threaded
.120
[3.00]
Shroud — 2 Hole Flange
Surface Mount
TE
Part No.
.120
[3.00]
C
.165
[4.20]
B
A
D
2 Plcs.
Description
Full Detent
Limited Detent
Smooth Bore
.160 Dia.
[4.10] Max.
.045
[1.10]
A
Dimension
B
C
Reference Part No. (Ref. only)
2998-5045-02
2998-5043-02
2998-5044-02
D
1056740-1
1757024-1
1757025-1
1056741-1
1757026-1
1757027-1
1056742-1
1757028-1
1757029-1
.328
8.33
.187
4.75
.098
2.49
.480
12.19
.481
12.22
.223
5.66
.102
2.59
.625
15.88
.282
7.16
.165
4.19
.073
1.85
.400
10.16
1757030-1
.352
8.94
.235
5.97
.073
1.85
.470
11.94
Part No.
1056745-1
1056743-1
1056744-1
Shroud
Design
DSCC
Part No.
Full Detent
Limited Detent
Smooth Bore
Full Detent
Limited Detent
Smooth Bore
Full Detent
Limited Detent
Smooth Bore
94007ZSP-3
94007ZSP-3L
94007ZSP-3S
94007ZSP-4
94007ZSP-4L
94007ZSP-4S
94007ZSP-5
94007ZSP-5L
94007ZSP-5S
Smooth Bore
94007ZSP-6SC
2-41
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
SMP Micro-Miniature Push-On Coaxial Connectors (Continued)
Shrouds (Continued)
Shroud — Press Fit
B
Description
Full Detent
A
Limited Detent
Shroud — Solder-In
Hermetic
.140
[3.60]
.050
[1.30]
.080
[2.00]
.015
Dia.
[0.40]
.145
[3.70]
Dia.
Description
Full Detent
Limited Detent
Smooth Bore
Dim.
A
.182
4.60
.174
4.40
.154
3.90
Dim.
B
.115
2.90
.120
3.00
.080
2.00
Reference
Part No. (Ref. only)
Part
No.
2998-5005-02
1056726-1
2998-5033-02
1056734-1
2998-5035-02
1056736-1
Reference Part No. (Ref. only)
2998-5054-94
2998-5055-94
2998-5056-94
Part No.
1056750-1
1056751-1
1056752-1
.098
Dia.
[2.50]
PCB Plug, Bulkhead Mount,
Smooth Bore
.080±.004
[2.03±0.10]
Ø.230
[5.84]
SMP Smooth Bore
Interface per
MIL-STD-348A
PCB Thru-Hole Mount,
Smooth Bore
Body
.182
[4.62]
Part
No.
1663678-1
.102±.001
[2.59±0.03]
.306
[7.77]
.155
[3.94]
5 Plc.
.200
[5.08]
Ø.030
[.76]
4 Plc.
Ø.015±.001
[.38±.03]
Dielectric
.150
[3.81]
Ø.068
[1.73]
4 Plc.
.010
[.254]
4 Plc.
Contact
.150
[3.81]
Part
No.
1663679-1
Ø.272±.001
[6.91±.03]
Across Corners
.337 [8.56] Ref.
2-42
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
SMP Micro-Miniature Push-On Coaxial Connectors (Continued)
Between Series Adapters
Between Series Coaxial
Transmission Line Adapters
provide convenient transitions between popular
series coaxial connectors.
The adapter design provides a minimum length
consistent with good electrical performance. The small
size, low VSWR, and broad
frequency coverage permits
a wide range of applications
in both measurement and
systems use.
SMA Plug – SMP Plug
SMA Jack – SMP Jack
.498
[12.60]
.690
Ref.
[17.50]
2
Part Number 1056706-1
Reference Part No. (Ref. only)
2981-2241-00
Part Number 1056702-1
Reference Part No. (Ref. only)
2980-2240-00
SMA Jack – OSMP Plug
SMP Jack – SMA Plug
.632
Ref.
[16.00]
.560
[14.20]
O
RF Connectors
.187
[4.70]
.312
Hex.
[7.90]
SMA Plug
SMP
Jack
Part Number 1056707-1
Reference Part No. (Ref. only)
2982-2240-00
Part Number 1056708-1
Reference Part No. (Ref. only)
2982-2241-00
Miscellaneous
Glass Bead Assembly
.063
[1.60]
.015
[.400]
Dia.
Plug Assembly, Thread-In
with Sliding Pin
.099
[2.50]
Reference
Part No. (Ref. only)
2998-5022-94
Part
No.
1056728-1
.125
[3.20]
.250
[6.35]
Hex
.300
[7.62]
Part
No.
1663670-1
45˚
.230
[5.84]
.015±.001
[0.38±0.03]
Ø.243/.236
[6.16/5.98]
Female Contact Accepts
.015 [0.38] Pin x .090 [2.29]
Max. Long
.095
[2.41]
.190-32 UNF-2A
2-43
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
OSSP Subminiature Modular Blind Mate Connectors
Features
■
Subminiature version of
OSP (BMA) Blind Mate
Connectors
■
For space savings
■
Family of connectors and
adapters
METRIC
Dimensions in this
OSSP section are
millimeters over inches.
All other pages are
inches over millimeters.
OSSP connectors are a
subminiature version of
the OSP (BMA) blind mate
series. Connectors in this
series incorporate the
design elements of the
OSP (BMA) interface including the float and mismate
features. OSSP blind mates
are about 40% smaller than
OSP (BMA) connectors and
Engineering Data
A complete family of OSSP
connectors and adapters is
available including cable
connectors, fixed and float
mount panel connectors
and hermetic connectors.
Rigid mount units will func-
tion to specifications up to
±.064 [±.0025] radial misalignment with the mating
plug connector.
Applications requiring
greater than ±.064 [±.0025]
radial misalignment can use
either the float design or
floating connector plates
with guide pins.
Mechanical
Impedance —
Frequency —
Temperature Rating —
50 ohms
dc to 28.0 GHz
-65° to 125° C
Electrical
RG-405 (.085) Semi-Rigid
VSWR —
RF Transmission Loss —
Insulation Resistance —
Contact Resistance —
Center Contact
Outer Contact
Outer Contact to Cable
Dielectric Withstanding Voltage —
Corona Extinction Voltage at 70,000 Ft.—
RF High Potential at 5 MHz —
RF Leakage Interface Only —
Power Handling —
1.05 + .01f (GHz)
-.040 x √ f (GHz)
5,000 megohms min.
Force to Engage —
Force to Disengage —
Center Contact Retention —
Durablilty —
Radial Misalignment —
Rigid Mount
Float Mount
3 pounds max.
1.5 pounds max.
4 pounds min.
1,000 Cycles
±.06 [±.0025]
±.51 [±.020]
Mating Characteristics
6.0 milliohms max.
3.0 milliohms max.
0.5 milliohms max.
675 volts RMS
250 volts min.
675 volts RMS
-(90-fGHz) dB min. (fully mated)
300W at 3 GHz (sea level) and room
temperature
Environmental
Corrosion —
Vibration —
Shock —
Temperature Cycling —
Moisture Resistance —
are designed to be used in
applications where space is
at a premium.
Method 101, Condition B, MIL-STD-202
Method 204, Condition D, 20G’s, MIL-STD-202
Method 213, Condition I, 100G’s, MIL-STD-202
Method 107, Condition B, MIL-STD-202
Method 106, MIL-STD-202
Jack Connector —
Center Contact Socket Oversize test Pin —
.533 + .003 [.0210 + .0001] dia.
Test Pin Finish —
16 micro inch max.
Insertion Depth —
.76/1.14 [.030/.045]
Number of Insertions — 3
Insertion Force
Test Pin —
.528 + .003 [.0208 + .0001] dia.
Test Pin Finish —
16 micro inch
Insertion Force —
3 pounds max.
Withdrawal Force
Test Pin —
.495 + .003 [.0195 - .0001] dia.
Test Pin Finish —
16 micro inch max.
Insertion Depth —
1.27/1.91 [.050/.075]
Withdrawal —
1/2 ounce min.
Finish
Center Contact —
Housing —
Gold plate per MIL-G-45204, Type II, Class 0 over nickel
plate per QQ-N-290, Class 2 or passivate per ASTM-A380
Gold plate per MIL-G-45204, Type II, Class 0 over nickel
plate per QQ-N-290, Class 2 or passivate per ASTM-A380
Material
Housing —
Center Contact —
Dielectric —
Gasket (O’Ring) —
Corrosion resistant steel Type 303 (stainless) per
ASTM A484 and A582
Beryllium copper per ASTM-B-196
TFE fluorocarbon per ASTM-D-1457
MIL-P-25732
2-44
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
Interface Mating
Dimensions
The connector interface,
specifically designed for
multiple interconnects,
maintains reliable performance over the typical
mechanical tolerance
required in cost effective
packaging.
Plug
Jack
Description
Jack
Plug
A
1.22
0.48 Nom.
1.22 Nom.
0.48
RF Connectors
The interface test data
shows excellent performance is maintained with mating gaps up to .015 inch.
2
B
3.91
.154 Min.
3.56 Nom.
.140
Dimensions
C
D
5.33
5.00
.210 Ref.
.197 Nom.*
5.33 Ref.
5.00 Min.
.210
.199
E
3.35
.132 Max.
0.51 Nom.
.020
F
3.23
.127 Max.*
3.25 Min.
.128
*With spring bottomed.
2-45
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
For Semi-Rigid Cable, 2.16 [.085] Dia.,
Direct Solder Attachment
Bulkhead Feedthrough
Cable Plug — Rear Mount
2.3
Dia. Min.
[.089]
4.6 0.03 Dia.
[.180 .001]
4
[.180
3.0
Dia.
[.120]
17.5
[.690]
7.3
Max.
[.289]
0.03
4.6 +– .000
Dia.
.001 ]
[ .182 +– .000
Recommended
Mounting Hole
Cable
Plating
Reference
Part No.
Part
No.
RG-405/U,
2.16
[.085]
Gold
4703-7985-00
1255511-1
Flange Mount Cable Jack —
Floating Rear Mount
0.08
7.1 +– 0.00
Dia.
+ .003
[.281 – .000 ]
2.4 Dia.
[.093] 2 Plcs.
3.0 Dia.
[.120]
14.7
Dia.
[.580]
11.0 0.10
[.435 .004]
0.08
7.1 +– 0.00
Dia.
+ .003
[.281 – .000 ]
11.0
[.435]
0.00
7.1 +– 0.05
Dia.
+ .000
[.280 – .002 ]
18.0
[.710]
5.5
[.217]
2.3
[.089]
Dia.
7.6
[.300]
ded
ole
0.00
7.1 +– 0.05
Dia.
+ .000
[.280 – .002 ]
Recommended
Mounting Hole
Cable
Reference
Part No.
Part
No.
RG-405/U,
2.16
[.085]
4706-7985-02
1059868-1
Finish: Inner housing that is soldered to cable is gold plated. Outer housing
is passivated stainless steel.
When using semi-rigid cable, it is recommended that a service loop be used
to facilitate the float features of the connector.
Feedthru Snap-In
12.7
Ref.
[.500]
0.08
Ø 7.1 +– 0.00
+ .003
[.280 – .000 ]
11.4
Ref.
[.450]
0.05
6.5 +– 0.00
+ .002 Dia.
[.256 – .000 ]
18.0
[.710]
14.7
Min.
[.570]
Compression
Spring
6.1 Dia.
[.240]
7.6 Dia.
[.300] Max.
3.0 Dia.
[.120]
Connector
Retaining Clip
Recommended
Mounting Hole
Cable
Reference
Part No.
Part
No.
RG-405/U,
2.16
[.085]
4710-7985-00
1059874-1
2-46
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
For Flexible Cable,
Crimp Attachment
Bulkhead Feedthrough
Cable Plug — Rear Mount
4.6 0.03 Dia.
[.180 .001]
D
[.
2
33.0
Ref.
[1.298]
RF Connectors
0.03
4.6 +– .000
Dia.
+ .001
[.182 – .000 ]
Recommended
Mounting Hole
Flange Mount
Cable Jack —
Floating Rear Mount
Cable
Plating
Reference
Part No.
(Ref. Only)
Part
No.
RG-174/U,
188/U, 316U
Passivated Stainless Steel
4733-7388-02
1059886-1
2.4 Dia.
[.093] 2 Plcs.
0.08
1 +– 0.00
Dia.
.003
1 +– .000
]
14.7
Dia.
[.580]
11.0 0.10
[.435 .004]
0.08
7.1 +– 0.00
Dia.
+ .003
[.281 – .000 ]
11.0
[.435]
0.00
7.1 +– 0.05
Dia.
+ .000
[.280 – .002 ]
Cable
RG-188/U,
316 Double
Braided Only
RG-174/U,
188/U, 316U
35.6
[1.40]
Max.
5.5
[.217]
7.6
[.300]
0.00
7.1 +– 0.05
D
+ .000
[.280 – .002 ]
Recommended
Mounting Hole
Plating
Reference
Part No.
(Ref. Only)
Part
No.
Passivated Stainless Steel
4736-7316-02
1059888-1
Passivated Stainless Steel
4736-5001-02
1059887-1
2-47
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
For Panel Mount
Straight Terminal
Threaded Installation —
Panel Feedthrough Plug
Receptacle
11.4
[.450]
4.1 0.03 Dia.
[.162 .001]
4.0 Dia.
[.156]
0.4 Dia.
[.015]
1.2 Dia.
[.049]
1.3 0.03 Dia.
[.051 .001]
5.3 0.05
[.210 .002]
Recommended
Mounting Hole
Feedthru Snap-In
Cable Jack
35.6
Max.
[1.400]
0.08
7.1 +– 0.00
+ .003 Dia.
[.280 – .000 ]
Mounting Hole 6.1
Dia.
[.240]
OSSP
Jack
PCB Vertical Plug
0.08
Ø 4.0 +– 0.00
+ .003
[.159 – .000 ]
Straight Knurl
+ .002
5.1
[.200]
Ø 0.4 0.03
[.015 .001]
O-Ring
Press-In Plug
1059903-1
Reference
Part No.
(Ref. Only)
4740-7388-00
Part
No.
6.4
[.250]
Ø 3.9
5.1
Typ.
[.200]
Ø 0.9
[.034]
O-Ring
5.84
[.230]
1.0 Sq.
[.040] Typ.
4 Plcs.
5.08 0.51
[.200 .020]
5.3 0.05
[.210 .002]
0.08
Ø 1.7 +– 0.00
Hole
.003 Typ.
[.067 +– .000
]
5 Plcs.
6.35
[.250]
Sq.
5.08
Typ.
[.200]
1.02 Sq.
[.040]
4 Plcs.
O-Ring
Part
No.
1059901-1
Reference
Part No.
(Ref. Only)
4763-0000-00
Part
No.
1059919-1
Recommended
Mounting Hole
5.08
[.200]
Typ.
0.08
Ø 1.7 +– 0.00
Hole
+ .003 Typ.
[.067 – .000 ]
5 Plcs.
Ø 0.86
[.034]
14.61
[.575]
Reference
Part No.
(Ref. Only)
4757-1154-02
5.1
[.200]
5.08
[.200]
17.78 0.25
[.700 .010]
1059889-1
Recommended
Mounting Hole
6.4
[.250]
Sq.
Mounting
Surface
12.6
[.498]
+ 0.00
– 0.05
+ .000
– .002 ]
5.1
[.200]
PCB Right Angle
Bulkhead Plug
4757-5006-02
Ø 0.9 0.03
[.034 .001]
[.154
OSSP
Plug
Passivated
Stainless Steel
Ø 4.0 0.03
[.156 .001]
OSSP
Plug
8.7
[.343]
Part
No.
Connector
Retaining Clip
Compression
Spring
0.05
11.4 +– 0.00
Reference
Part No.
(Ref. Only)
0.05
6.5 +– 0.00
.002 Dia.
[.256 +– .000
]
Mounting Hole
22.4 0.38
[.880 .015]
[.450 – .000 ]
Plating
6.4
[.250]
Part No.
1484546-1
Recommended
Mounting Hole
5.11 0.03
[.201 .001]
2-48
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
Hermetically Sealed
3.6 Dia.
[.140]
1.0 Dia.
[.039]
12.1
[.475]
VSWR
(GHz)
RF Leakage
(dB)
Plating
1.06 + .01f
–(85-fGHz)
Gold
2
3.0
Dia.
[.118]
RF Connectors
Metal to Metal
Formable Gasket —
Panel Feedthrough Plug
Receptacle
.03
Dia.
[.012]
Reference
Part No.
(Ref. Only)
4757-5014-00
Part
No.
1059905-1
Recommended Mounting Hole Detail A at bottom of this page.
0.00
4.8 +– 0.05
Dia.
Solder and Braze-In
Panel Feedthrough Plug
Receptacle
5.3
Dia.
[.210]
+ .000
[.189 – .002 ]
8.2
[.322]
Ref.
0.5 0.03 Dia.
[.020 .001]
VSWR
(GHz)
RF Leakage
(dB)
Plating
1.06 + .01f
–(85-fGHz)
Gold
Reference
Part No.
(Ref. Only)
4757-3204-00
Part
No.
1059902-1
Recommended Mounting Hole Detail B at bottom of this page.
Recommended
Mounting Hole Detail for
Hermetically Sealed
Detail A*
.003
4.1 +– 0.05
.001
]
[.162 +– .002
Detail B*
0.08
0.8 +– 0.00
+ .003
[.031 – .000 ]
.000
1.0 +– 0.03
Dia. [.041 + .000 ] Dia.
– .001
6.4
[.250]
Ref.
R 0.08
Max.
[.003]
3.2 0.03
[.121 .001]
Dia.
0.08
R 0.13 +– 0.03
+ .003
[.005 – .001 ]
2.5
[.100]
0.05
Ø 5.5 +– 0.03
+ .002
[.218 – .001 ]
0.03
Ø 4.8 +– 0.00
+ .001
[.190 – .000 ]
*Consult appropriate Instruction Sheet for complete mounting procedure.
2-49
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
OSP (BMA) Miniature Modular Blind Mate Connectors
Features
■
Interface designed for
multiple interconnects
■
For high performance
microwave system
requirements
■
Bulkhead or panel mount
■
For semi-rigid cable
OSP (BMA) miniature connectors for semi-rigid cable
meet high performance
requirements for microwave
multiple interconnects.
Standard units are available
in bulkhead or panel mount
designs for either direct solder or OSCC solderless
compression crimp attachment. Complete tooling for
both versions is located
in the Tool Section of this
catalog.
Jack connectors are available in either float or rigid
mount. Rigid mount units will
function to specifications up
to ±.10 [.004] radial misalignment with the mating
plug connector. Applications
requiring greater than ±.10
[.004 ] radial misalignment
can use either the float
design or floating connector
plates with guide pins.
The OSCC Solderless
Compression Crimp attach-
ment meets high performance requirements for
microwave system applications. The cable attachment
is permanent and highly
reliable.
Ease of assembly permits
users unskilled in soldering
techniques to rapidly produce cable assemblies with
consistently excellent
mechanical and electrical
performance.
METRIC
Dimensions in this
OSP (BMA) section are
millimeters over inches.
All other pages are
inches over millimeters.
2-50
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
OSP (BMA) Miniature Modular Blind Mate Connectors (Continued)
The specifications given
refer specifically to mated
pair of Part Numbers
1059410-1 and 1059402-1
(RG 402) and 1059412-1
and 1059404-1 (RG 405).
Specifications on other connectors are available on
request.
Impedance —
Frequency —
Temperature Rating —
50 ohms
dc to 22.0 GHz
-65° to 125° C
Electrical
RG 402 (.141) Semi-Rigid
RG 405 (.085) Semi-Rigid
1.02 + .005f (GHz)
1.02 + .008f (GHz)
-.03 x √ f (GHz)
5,000 megohms min.
1.05 + .005f (GHz)
1.05 + .009f (GHz)
-.03 x √ f (GHz)
5,000 megohms min.
VSWR —
dc - 18.0 GHz
18.0 - 22.0 GHz
RF Transmission Loss —
Insulation Resistance —
Contact Resistance —
Center Contact
Outer Contact
Outer Contact to Cable
Dielectric Withstanding Voltage —
Corona Extinction Voltage at 70,000 Ft.—
RF High Potential at 5 MHz —
RF Leakage Interface Only —
Power Handling —
2
RF Connectors
The general electrical,
mechanical and environmental specifications in the
following table are recommended for procurement
documents or drawings.
Engineering Data
2.0 milliohms max.
2.0 milliohms max.
2.0 milliohms max.
2.0 milliohms max.
0.5 milliohms max.
0.5 milliohms max.
1500 volts RMS
1000 volts RMS
375 volts min.
335 volts min.
1,000 volts RMS
670 volts RMS
-(90-fGHz) dB min. (fully mated)
-(90-fGHz) dB min. (fully mated)
300W at 3 GHz (sea level) and room temperature
Environmental
Corrosion —
Vibration —
Shock —
Temperature Cycling —
Moisture Resistance —
Method 101, Condition B, MIL-STD-202
Method 204, Condition D, 20G’s, MIL-STD-202
Method 213, Condition I, 100G’s, MIL-STD-202
Method 107, Condition B, MIL-STD-202
Method 106, MIL-STD-202
Material
Housing —
Center Contact —
Dielectric —
Gasket (O’Ring) —
Corrosion resistant steel Type 303 (stainless) per ASTM A484 and A582
Beryllium copper per ASTM-B-196
TFE fluorocarbon per ASTM-D-1457
MIL-P-25732
Mechanical
Force to Engage —
Force to Disengage —
Center Contact Retention —
Durablilty —
Radial Misalignment —
Rigid Mount
Float Mount
3 pounds max.
1.5 pounds max.
6 pounds min.
5,000 Cycles
±.10 [±. 004]
±.51 [±.020]
Mating Characteristics
Jack Connector —
Center Contact Socket
Insertion Force
Withdrawal Force
Oversize test Pin —
Test Pin Finish —
Insertion Depth —
Number of Insertions —
Test Pin —
Test Pin Finish —
Insertion Depth —
Insertion Force —
Test Pin —
Test Pin Finish —
Insertion Depth —
Withdrawal —
.945 + .003 [.0372 + .0001] dia.
16 micro inch
.76/1.14 [.030/.045]
3
.940 + .003 [.0370 + .0001] dia.
16 micro inch
1.27/1.91 [.050/.075]
3 pounds max.
.90 + .003 [.0355 - .0001] dia.
16 micro inch
1.27/1.91 [.050/.075]
1 ounce min.
Finish
Center Contact —
Housing —
Gold plate per MIL-G-45204, Type II, Class 1 over copper plate per MIL-C-14550
Gold plate per MIL-G-45204, Typ II, Class 0 over nickel plate per QQ-N-290, Class 2
or passivate per ASTM-A380
All dimensions shown are nominal.
Contact the factory for specific
tolerances.
2-51
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
OSP (BMA) Miniature Modular Blind Mate Connectors (Continued)
Interface Mating
Dimensions
The connector interface,
specifically designed for
multiple interconnects, maintains reliable performance
over the typical mechanical
tolerance required in cost
effective packaging.
The interface test data
shows excellent performance is maintained with mating gaps up to 0.38 [.015].
Meets MIL-STD-348 Figure
321. Intermateable to BMA
Connectors.
Jack
Letter
A
B
C
D
E
F
Plug
Dimensions
1.78
.070 Nom.
5.72 Min.
.225
7.62
.300 Ref.
5.00
.197 Nom.*
5.08
.200 Max.
3.23
.127 Max.*
Letter
A
B
C
D
E
F
Dimensions
1.78
.070 Nom.
5.33
.210 Nom.
7.62
.300 Ref.
5.05
.199 Min.
0.91
.036 Nom.
3.25
.128 Min.
*With spring bottomed
2-52
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
OSP (BMA) Miniature Modular Blind Mate Connectors (Continued)
For Semi-Rigid Cable, 2.16 [.085] and
3.58 [.141] Dia., Direct Solder Attachment
Bulkhead Feedthrough
Cable Plug
Rear Mount
7.9
Hex.
A
[.312]
Dia.
6.1 0.03 Dia.
[.240 .001]
6.1
[.240
2
6.1 + 0.03
– .000
ded
Hole
Cable
B
Dia.
Dia.
[.242 + .001]
– .000
Recommended
Mounting Hole
Reference
Part No.
(Ref. Only)
Part
No.
4.6
.180
4503-7941-00
1059402-1
3.0
.120
4503-7985-00
1059404-1*
Dimensions
Plating
RG-402/U
3.58
.141
RG-405/U
2.16
.085
9.19
Max.
[.362]
A
B
Gold
3.7
.144
Gold
2.3
.089
RF Connectors
17.5
[.690]
*Non-SCD.
Bulkhead Feedthrough Cable
Jack Rigid
Rear Mount
6.4
A
Dia.
Dia. [.250]
11.1
[.437]
11.1
Hex.
[.437]
9.1 + 0.03
18.0
[.710]
ed
ole
Cable
RG-402/U
3.58
.141
RG-405/U
2.16
.085
9.19
Max.
[.362]
B
Dia.
– .000
[.359 + .001]
Recommended
Mounting Hole
Reference
Part No.
(Ref. Only)
Part
No.
4.6
.180
4504-7941-00
1059410-1
3.0
.120
4504-7985-00
1059412-1
Dimensions
Plating
A
B
Gold
3.7
.144
Gold
2.3
.089
+ 0.10
2.6 – 0.03 Dia.
+ .004
[.102 – .001 ] 2 Holes
Flange Mount Cable Jack
Floating Rear Mount
14.2 0.10
[.560 .004]
B Dia.
14.2
[.560]
A
Dia.
Dimensions
Cable
RG-402/U
3.58
.141
RG-405/U
2.16
.085
9.6 + 0.05
– 0.03 Dia.
[.377 + .002]
– .001
9.5
[.372]
19.1
Dia.
[.750]
0.25
9.5 +– 0.00
+ .010
[.375 – .000 ]
18.0
[.710]
Dia.
– .000
7.1
[.280]
Recommended
Mounting Hole
Reference
Part No.
(Ref. Only)
Part
No.
A
B
3.7
.144
4.6
.180
4506-7941-02
1059453-1
2.3
.089
3.0
.120
4506-7985-02
1059456-1
Finish: Inner housing that is soldered to cable is gold plated. Outer housing is passivated
stainless steel.
When using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector.
2-53
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
OSP (BMA) Miniature Modular Blind Mate Connectors (Continued)
For Semi-Rigid Cable, 2.16 [.085] and
3.58 [.141] Dia., Direct Solder Attachment (Continued)
Low Profile – Bulkhead
Feedthrough Cable Jack –
Floating Rear Mount
A
11.2 Dia.
Dia. [.440] Max.
9.3 0.03 Dia.
[.365 .001]
16.2
[.640]
Cable
Plating
RG-402/U
3.58
.141
RG-405/U
2.16
.085
9.4 + 0.05
– 0.03 Dia.
[.368 + .002]
B
Dia.
– .001
Recommended
Mounting Hole
Reference
Part No.
(Ref. Only)
Part
No.
4.6
.180
4522-7941-02
1059505-1
3.0
.120
4522-7985-02
1059506-1
Dimensions
A
B
Gold
3.7
.144
Gold
2.3
.089
When using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector.
Low Profile – Panel
Feedthrough Cable Jack –
Floating Rear Mount
7.6 Dia.
[.300]
A Dia.
18.0
[.710]
Cable
Plating
RG-402/U
3.58
.141
RG-405/U
2.16
.085
B
Dia.
Reference
Part No.
(Ref. Only)
Part
No.
4.6
.180
4510-7941-00
1059465-1
3.0
.120
4510-7985-00
1059467-1
Dimensions
A
B
Gold
3.7
.144
Gold
2.3
.089
Recommended removal tool part number 1059774-1 is described in Tool Section.
When using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector.
Stand-Off C
Panel A
Panel
B
8.6 + 0.08
– 0.00
[.340 + .003]
8.0 + 0.05
– 0.00
[.316 + .002]
– .000
– .000
Panel
B
1.3 + 0.00
– 0.13
[.050 + .000]
– .005
Panel A ±.003
2.3
.090
2.3
.090
2.3
.090
3.2
.125
3.2
.125
3.2
.125
Panel B ±.003
9.5
.375
11.1
.438
12.7
.500
9.5
.375
11.1
.438
12.7
.500
Stand-Off Panel C +.050/–.000
7.2
.285
5.6
.222
4.1
.160
6.4
.250
4.7
.187
3.2
.125
Recommended Mounting Detail
2-54
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
OSP (BMA) Miniature Modular Blind Mate Connectors (Continued)
For Semi-Rigid Cable, 2.16 [.085] and 3.58 [.141] Dia.,
OSCC Solderless Compression Crimp Attachment
Bulkhead Feedthrough
Cable Plug
Fixed Rear Mount
7.9
A
Hex.
Dia. [.312]
6.1 0.03 Dia.
[.240 .001]
6
[.240
2
9.19
Max.
[.362]
5.5 Dia.
[.218]
B
d
Cable
Plating
Dim. A
RG-405/U
2.16
.085
Passivated
Stainless
Steel
2.2
.088
[.242
– .000 Dia.
+ .001]
– .000
Recommended
Mounting Hole
Dim. B
Before
After
Crimping
Crimping
19.8
.782
RF Connectors
6.1 + 0.03
17.2
.677
Reference
Part No.
(Ref. Only)
Part
No.
4503-7685-02
1059399-1
Outline drawing shows after crimp dimensions.
A
6.4
Dia. [.250] Dia.
Bulkhead Feedthrough
Cable Jack
Fixed Rear Mount
11.1
Hex.
[.437]
11
[.43
5.5
Dia.
[.218]
B
9.1 + 0.03
– .000 Dia.
[.359 + .001]
12.7
Max.
[.500]
– .000
d
e
Recommended
Mounting Hole
Cable
Plating
Dim. A
RG-402/U
3.58
.141
Passivated
Stainless
Steel
3.6
.143
Dim. B
Before
After
Crimping
Crimping
21.1
.830
18.2
.715
Reference
Part No.
(Ref. Only)
Part
No.
4504-7641-02
1059408-1
Outline drawing shows after crimp dimensions.
Flange Mount Cable Jack
Floating Rear Mount
2.6 Dia.
[.102] 2 Plcs.
Dia.
9.5 Dia.
[.372]
19.1
Dia.
[.750]
5.5 Dia.
[.218]
14.2
[.560
0.10
.004]
9.6 + 0.05
– 0.03 Dia.
[.377 + .002]
– .001
9.5
[.372]
D
14.2
[.560]
A
Dia.
B
Recommended
Mounting Hole
Dim. B
Before
After
Crimping
Crimping
Cable
Plating
Dim. A
RG-402/U
3.58
.141
RG-405/U
2.16
.085
Passivated
Stainless
Steel
Passivated
Stainless
Steel
3.6
.143
22.6
.891
2.2
.088
22.6
.891
A
7.1
[.280]
9.7
[.380]
Reference
Part No.
(Ref. Only)
Part
No.
19.8
.780
4506-7641-02
1059451-1
19.8
.780
4506-7685-02
1059452-1
Outline drawing shows after crimp dimensions.
When using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector.
2-55
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
OSP (BMA) Miniature Modular Blind Mate Connectors (Continued)
For Flexible Cable,
Crimp Attachment
Bulkhead Feedthrough
Cable Plug
Rear Mount
6.9 0.03 Dia.
[.240 .001]
11.4
[.447]
ded
Hole
6.9
[.240
6.1 + 0.03
– .000 Dia.
[.242 + .001]
21.2
Ref.
[.833]
11
[.44
– .000
Recommended
Mounting Hole
34.9
Max.
[1.375]
Cable
Plating
Reference
Part No.
(Ref. Only)
Part
No.
RG-174/U,
179, 187,
188, 316
Passivated Stainless Steel
4533-7388-02
1059523-1
2.6 Dia.
[.102] 2 Plcs.
Dia.
Flange Mount Cable Jack
Floating Rear Mount
9.6 + .051
– .025 Dia.
[.377 + .002]
– .001
9.5
[.372]
Dia.
14.2
[.560]
21.7
Ref.
[.875]
19.1
[.750]
Dia.
7.1
[.280]
9.5
[.375]
Recommended
Mounting Hole
35.6
Max.
[1.400]
Plating
Reference
Part No.
(Ref. Only)
Part
No.
Passivated Stainless Steel
4536-7341-02
1059540-1
Passivated Stainless Steel
4536-7388-02
1059541-1
Passivated Stainless Steel
4536-5014-02
1058572-1
Cable
RG-55/U,
142, 223,
400
RG-174/U,
179, 187,
188, 316
RG-178,
Double
Braid
Low Profile – Panel
Feedthrough Cable Jack –
Rear Mount
9.5
[.372]
Dia
14.2 .102
[.560 .004]
7.6
[.300]
Dia.
9.4 + 0.05
– 0.03 Dia.
[.368 + .002]
22.3
Ref.
[.878]
35.6 Max.
[1.400]
– .001
Recommended
Mounting Hole
Cable
Plating
Reference
Part No.
(Ref. Only)
Part
No.
RG-174/U,
179, 187,
188, 316
Passivated Stainless Steel
4540-7388-02
1059551-1
Refer to Recommended Mounting Hole Detail for Semi-Rigid Cable Low Profile Feedthrough Cable Jack.
Recommended removal tool part number 1059774-1 is described in Tool Section.
2-56
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
OSP (BMA) Miniature Modular Blind Mate Connectors (Continued)
Panel Mount
Straight Terminal
2-Hole Flange Mount Plug
Receptacle
6.4
Dia.
[.250]
2.6
Dia. 12.2
[.102]
[.481]
2 Plcs.
1.3
.050 Dia.
15.9
[.625]
9.9
[.390]
22.3
[.878]
6.6
[.260]
8.4
[.330]
2-Hole Flange Mount Jack
Receptacle
2.6
Dia.
[.102]
2 Plcs.
12.2
[.481]
27.4
[1.080]
Passivated
Stainless
Steel
4551-1352-02
1049678-1
Plating
Reference
Part No.
(Ref. Only)
Part
No.
Passivated
Stainless
Steel
4552-1352-02
1059596-1
Plating
Reference
Part No.
(Ref. Only)
Part
No.
Passivated
Stainless
Steel
4551-1201-02
1329846-1
2
7.6
[.300]
4-Hole Flange Mount Plug
Receptacle
6.4 Dia.
[.250]
Part
No.
15.9
[.625]
1.3 Dia.
[.050]
4.1 Dia.
[.162]
Reference
Part No.
(Ref. Only)
RF Connectors
1.7
[.065]
4.1
Dia.
[.162]
Plating
2.6
Dia.
[.102]
2 Plcs.
1.3 Dia.
[.050]
22.3
[.878]
4.1 Dia.
[.162]
12.7
[.500]
Sq.
8.6
[.340]
Typ.
2-57
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
OSP (BMA) Miniature Modular Blind Mate Connectors (Continued)
Panel Mount (Continued)
Straight Terminal
Threaded Installation –
Panel Feedthrough Plug
Receptacle
0.5 Dia.
[.020]
1.6 Dia.
[.064]
5.3 Dia.
10.4
[.410] [.210]
5.5 0.03 Dia.
[.218 .001]
1.7 0.03 Dia.
[.066 .001]
5.3 0.05
[.210 .002]
6.4
Panel
[.250]
Plating
Reference
Part No.
(Ref. Only)
Part
No.
Passivated
Stainless
Steel
4557-5009-02
1059617-1
Plating
Reference
Part No.
(Ref. Only)
Part
No.
Passivated
Stainless
Steel
4558-5009-02
1059657-1
Recommended
Mounting Hole
Threaded Installation –
Panel Feedthrough Jack
Receptacle
0.5 Dia.
[.020]
1.6 Dia.
[.064]
5.3 Dia.
10.4
[.410] [.210]
1.7 0.03 Dia.
[.066 .001]
5.5 0.03 Dia.
[.218 .001]
5.3 0.05
[.210 .002]
6.4
Panel
[.250]
Recommended
Mounting Hole
Press Fit Installation –
Panel Feedthrough Plug
Receptacle
0.5 Dia.
[.020]
7.6 Dia.
[.300]
6.4 + 0.05
– .000 Dia.
[.253 + .002]
– .000
7.92
Dia.
[.312]
6.3 + .000
– 0.05
Dia.
[.248 + .000]
– .002
1.2 0.03 Dia.
[.046 .001]
6.4 0.03 Dia.
[.250 .001]
6.4
[.250]
Recommended
Mounting Hole
Plating
Reference
Part No.
(Ref. Only)
Part
No.
Passivated
Stainless
Steel
4557-5368-02
1059651-1
Press Fit Installation –
Panel Feedthrough Jack
Receptacle
0.5 Dia.
[.020]
7.6 Dia.
[.300]
6.4 + 0.05
– .000 Dia.
[.253 + .002]
– .000
1.2 0.03 Dia.
[.046 .001]
6.4 0.03 Dia.
[.250 .001]
6.3 + .000
6.4
– 0.05 Dia.
[.250]
[.248 + .000]
– .002
Recommended
Mounting Hole
Plating
Reference
Part No.
(Ref. Only)
Part
No.
Passivated
Stainless
Steel
4558-1154-02
1059654-1
2-58
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
OSP (BMA) Miniature Modular Blind Mate Connectors (Continued)
Panel Mount (Continued)
Straight Terminal
Printed Circuit Board
Straight Plug Receptacle –
Captured Contact
– .000
1.0 Sq.
[.040] 4 Plcs.
12.7
L
[.500]
5.1
[.200]
Typ.
6.4
[.250]
Sq.
Plating
Reference
Part No.
(Ref. Only)
Part
No.
Dim.
L
Gold
4563-0000-00
1059684-1
Gold
—
1663572-1
12.7
.500
21.9
.862
5.1
[.200]
Typ.
Recommended
Mounting Hole
Straight Jack Receptacle –
Captured Contact
RF Connectors
1.3 Dia.
[.050]
2
1.7 + 0.08
– .000 Dia.
[.067 + .003] Hole Typ.
1.7 + 0.08
– .000 Dia.
[.067 + .003] Hole Typ.
– .000
1.0 Sq.
[.040] 4 Plcs.
1.3 Dia.
[.050]
Plating
5.1
[.200]
Typ.
9.5
[.375]
Dia.
13.5
[.530]
5.1
[.200]
Typ.
Gold
Reference
Part No.
(Ref. Only)
4562-0000-00
Part
No.
1059681-1
Recommended
Mounting Hole
Right Angle Plug
Receptacle – Captured
Contact
13.5
[.530]
15.0
[.590]
1.7 + 0.08
– .000 Dia.
[.067 + .003] Hole Typ.
– .000
1.0 Sq.
[.040] 4 Plcs.
Plating
1.3 Dia.
[.050]
6.4
[.250]
Sq.
5.1
[.200]
Typ.
5.1
[.200]
Typ.
Gold
Reference
Part No.
(Ref. Only)
4565-0000-00
Part
No.
1059691-1
Recommended
Mounting Hole
2-59
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
OSP (BMA) Miniature Modular Blind Mate Connectors (Continued)
Hermetically Sealed
Metal-To-Metal
Rigid Gasket Seal –
Panel Feedthrough Plug
Receptacle
0.5
Dia.
[.020]
5.3
Dia.
[.210]
10.4
[.410]
Rigid
Gasket
1.6
[.064]
Dia.
VSWR
(GHz)
RF Leakage
(dB)
Plating
1.04 + .009f
–(90-fGHz)
Passivated stainless steel
Reference
Part No.
(Ref. Only)
4557-5119-02
Part
No.
1059632-1
Installation Thermal Limit: 250°C.
Recommended Mounting Hole Detail A follows, page 2-64.
Rigid Gasket Seal –
Panel Feedthrough Jack
Receptacle
0.5 Dia.
[.020]
11.2
[.450]
5.3 Dia.
[.210]
1.6
[.064]
Dia.
Rigid
Gasket
VSWR
(GHz)
RF Leakage
(dB)
Plating
1.04 + .009f
–(90-fGHz)
Passivated stainless steel
Reference
Part No.
(Ref. Only)
4558-5119-02
Part
No.
1059665-1
Installation Thermal Limit: 250°C.
Recommended Mounting Hole Detail A follows, page 2-64.
Field Replaceable
Solder and Braze-In
Panel Feedthrough Plug
Receptacle
4.0 + 0.05
– 0.03 Dia.
[.158 + .002]
5.3
Dia.
[.210]
– .001
9.9
[.390]
5.6 0.13
[.220 .005]
0.5 0.03 Dia.
[.020 .001]
Glass Seal
VSWR
(GHz)
RF Leakage
(dB)
Plating
1.06 + .01f
–(90-fGHz)
Passivated stainless steel
Reference
Part No.
(Ref. Only)
4557-5329-02
Part
No.
1059637-1
Recommended Mounting Detail B or E follows, page 2-64.
2-60
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Push-On Coaxial Connectors
OSP (BMA) Miniature Modular Blind Mate Connectors (Continued)
Hermetically Sealed
(Continued)
2-Hole Flange Mount Plug
Receptacle With EMI/RFI
Gasket – 0.5 [.018] Dia.
Contact
2.8 + 0.05
6.4
Dia.
[.250]
– 0.03
[.112 + .002]
– .001
2.6
Dia.
[.102]
2 Plcs.
15.9
[.625]
Dia.
2
8.0 0.13
[.315 .005]
9.5
[.375]
0.5 0.03
[.018 .001]
Dia.
VSWR
(GHz)
RF Leakage
(dB)
Plating
1.06 + .01f
–(90-fGHz)
Passivated stainless steel
RF Connectors
12.2
[.481]
6.6
[.260]
Reference
Part No.
(Ref. Only)
4551-3357-02
Part
No.
1059572-1
Recommended Mounting Detail D follows at bottom of this page.
Recommended
Mounting Hole Detail
Detail A*
Detail B* (6.35 [.250] Panel Thickness)
5.5 0.03
[.218 .001]
1.7 0.03
[.066 .001]
Dia.
Dia.
5.5 0.03
[.218 .001]
Dia.
6.4
[.250]
Ref.
Panel
.000
4.1 +– 0.05
Dia.
.000
[.162 +– .002
]
6.4 0.08
[.250 .003]
Ref. Panel
Detail D*
Detail C*
3.2 0.13
[.125 .005]
3.2 0.13
[.125 .005]
Panel
Panel
2.6 0.03
[.102 .001]
Dia.
Detail E*
12.2
[.481]
Ref.
2.9 0.03
[.115 .001]
Dia.
5.5 0.03
[.218 .001]
Dia.
12.2
[.481]
Ref.
7.6 0.08
[.300 .003]
Ref. Panel
3.2 0.03
[.125 .001]
.000
4.1 +– 0.03
Dia.
.000
[.162 +– .001
]
*Consult appropriate Instruction Sheet for complete mounting details.
2-61
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Threaded Connectors
OSMM Microminiature Connectors
Introduction
The microminiature series
has been developed to meet
the increasing demand for
smaller connector size. This
series is small, but still very
rugged for its relative size.
The interface mating design
insures precise outer shell
alignment before engagement of the inner contacts.
The OSMM Series is compatible with smaller diameter semi-rigid cable.
Design and Construction
All shell and body parts are
made of stainless steel for
ruggedness and long life.
The dielectric is PTFE
fluorocarbon. The center
contacts are made of
beryllium copper, gold
plated. The coupling thread
is .138-40 UNF thread.
Types
The OSMM Series connectors are available for appro-
priate size semi-rigid and
flexible coaxial cables.
Panel and bulkhead mount
are also available to provide
complete flexibility to component and system design.
Application
Typical applications include
requirements from low RF to
high microwave frequencies.
The higher order moding for
this series is above 45.0
GHz, but the primary feature
is the microminiature size.
2-62
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Threaded Connectors
OSMM Microminiature Connectors (Continued)
Interface Mating Dimensions
Plug
Dim.
Weather
Seal
Gasket
F
See Note 1
G
E
A
F
.138-40,
UNF-2B
B
A Dia.
C
A Dia.
C
D
Reference Plane
E
B
Dia.
.138-40,
UNF-2A
C
E
D
F
B
Reference Plane
G
Min.
.0930
2.36
.0150
0.38
60°
.000
0.00
.055
1.40
.065
1.65
.000
0.00
Max.
.0946
2.43
.0163
0.42
90°
.010
0.25
.070
1.78
.099
2.29
.010
0.25
Dim.
A
B
C
D
E
F
Min.
.096
2.44
.076
1.98
.000
0.00
.000
0.00
.175
4.45
.140
3.56
Max.
.097
2.46
.082
2.08
.010
0.25
.010
0.25
2
RF Connectors
D
Jack
—
—
1. ID to meet VSWR and contact resistance when mated with
.0155 +.0008/-.0005 [0.0394 +.0203/-.0127] dia. pin.
2. When fully engaged, the two reference planes must coincide with metal
to metal contact.
Specifications
MIL-C-39012
Applicable Paragraph
Requirement
Detail
General
Material
3.3
Finish
which
3.31
Design
3.4
Steel corrosion resistant per ASTM-A-582 and ASTM-A-484, Type 303. Beryllium copper per
ASTM B 196. PTFE Fluorocarbon per ASTM-D-1457.
Center contacts shall be gold plated to a min. thickness of .00005 [0.0013] in accordance with
MIL-G-45204, Typ I, Grade C. All other metal parts shall be finished as to provide a connector
meets the corrosion requirements.
The design shall be such that the outline shown in this catalog and the interface dimensions of
MIL-STD-348A are met.
Electrical
Insulation Resistance
Corona Level
Dielectric Withstanding Voltage
RF HIgh Potential
3.11
3.22
3.17
3.23
Contact Resistance
3.16
VSWR
RF Leakage
Insertion Loss
3.14
3.26
3.27
The insulation resistance shall not be less than 5,000 megohms.
The connector shall not exhibit breakdown when the voltage is 150 volts rms at 70,000 ft.
The magnitude of the test voltage shall be 500 volts rms at sea level.
The withstanding voltage is 375 volts rms at 5 MHz. Leakage current is not applicable.
Center contact resistance: 3.5 milliohms max.
Outer contact resistance: 2.8 milliohms max.
No military slash sheet applies. Consult factory. Frequency range dependent on cable used.
No military slash sheet applies. Consult factory.
No military slash sheet applies. Consult factory. Frequency range dependent on cable used.
Mechanical
Force to Engage
3.5.1
Coupling Nut Retention
Coupling Proof Torque
Cable Retention
3.25
3.6
3.24
Mating Characteristics
3.7
Connector Durability
3.15
Recommended Mating Torque
—
The torque required to engage and disengage shall not exceed 1 in.-lbs. The longitudinal force
is not applicable.
40 lbs. min. Applicable for plug connectors only.
4 in.-lbs. min. Applicable for plug connectors only.
No military slash sheet applies. Consult factory.
Applicable to jack connectors only. Oversize pin .0165 [0.419] min. dia., .045 [1.14] deep; insertion
force 3 lbs. max. with .0163 [0.414] min. dia. pin; withdrawal force 0.5 oz. min. with .015 [0.38] max.
dia. pin.
The connector to be tested and its mating connector shall be subjected to 500 insertion and
withdrawal cycles at 12 cycles per minute max. The connector shall show no evidence of
mechanical failure and shall meet the mating characteristic requirements.
2 in.-lbs.
Environmental
Vibration
Shock
Thermal Shock
Corrosion (Salt Spray)
3.18
3.19
3.20
3.13
Moisture Resistance
3.21
Specification MIL-STD-202, method 204, test condition D.
Specification MIL-STD-202, method 213, test condition I.
No military slash sheet applies. Consult factory.
Specification MIL-STD-202, method 101, test condition B.
Specification MIL-STD-202, method 106. No measurements at high humidity. Insulation resistance
shall be at least 200 megohms within 5 minutes of removal from humidity.
2-63
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Threaded Connectors
OSMM Microminiature Connectors (Continued)
For Flexible and SemiRigid Cables
Straight Cable Plug
Cable
.687
Ref.
[17.45]
A
OSMM
Plug
.187
Hex.
[4.75]
Heat Shrink
Tubing*
RG 196/U
Flexible
.047 Dia.*
Semi-Rigid
Attachment
Crimp
Direct
Solder
Reference
Part
Dim.
Part No. (Ref. only) Number
A
.450
4031-7196-00
1059057-1
11.40 Ref. .
.360 Ref.
4001-7947-00
1058955-1
9.20
.
* Semi-rigid versions do not use heat shrink tubing.
Finish: Gold plate.
Straight Cable Jack
.650
Ref.
[16.51]
A
OSMM
Jack
Heat Shrink
Tubing*
.187
Hex.
[4.75]
Bulkhead Feedthrough
Cable Jack
.138
[3.51]
Min.
.062 Max.
[1.57] Panel
OSMM
Jack
.187
Ref.
[4.75]
Heat Shrink
Tubing*
Attachment
.047 Dia.*
Semi-Rigid
Direct
Solder
Reference
Part
Dim.
Part No. (Ref. only) Number
A
.330 Ref.
4002-7947-00
—
8.40
.
* Semi-rigid versions do not use heat shrink tubing.
Finish: Gold plate.
.778
Ref.
[19.76]
A
.312
.128
Min. [7.92]
[3.25]
Cable
Cable
Attachment
RG 196/U
Flexible
.047 Dia.*
Semi-Rigid
Crimp
Direct
Solder
Dim.
Reference
Part
A
Part No. (Ref. only) Number
.565 Ref.
4034-7196-00
1059060-1
14.40
.
.458
4004-7947-00
1058990-1
11.60 Ref..
* Semi-rigid versions do not use heat shrink tubing.
Finish: Gold plate.
Recommended
Mounting Hole
.393
Ref.
[9.98]
Right-Angle Cable Plug
.323
[8.20]
Ref.
OSMM
Plug
.187
[4.75]
Ref.
B
A .600
Ref.
[15.24]
Cable
Attachment
.047 Dia.*
Semi-Rigid
Direct
Solder
Dim.
A
Dim.
B
Reference
Part No.
(Ref. only)
Part
Number
.256 Ref. .178 Ref. 4007-7947-00 1058993-1
6.50
. 4.50
.
* Semi-rigid versions do not use heat shrink tubing.
Finish: Gold plate.
Heat Shrink
Tubing*
Bulkhead Feedthrough Jack
.438
[11.13]
.138
[3.51]
Min.
.358
[9.09]
.062 Max.
[1.57] Panel
.128
[3.25]
Min.
Recommended
Mounting Hole
OSMM
Jack
.015
[0.38]
.030
[0.76]
.037
[0.94]
Dia.
.027
Dia.
[0.69]
.187
Hex.
[4.75]
Description
Reference
Part No. (Ref. only)
Part Number
Captured Center Contact*
Turret Terminal
Rear Mount
4056-0000-00
—
* Contact captivation per U.S. patent number 3,292,117.
Finish: Gold plate.
Printed Circuit Board
Straight Jack
.195
[4.95]
OSMM
Jack
.385
[9.78]
.156
Sq.
[3.96]
.155
[3.94]
.100
Typ.
[2.51]
.027
Dia.
[0.69]
.020 Sq. Typ.
[0.51] 4 Plcs.
Description
Reference
Part No. (Ref. only)
Part Number
Captured Center Contact*
Straight Terminal
4062-0000-00
1059081-1
* Contact captivation per U.S. patent number 3,292,117.
Finish: Gold plate.
2-64
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Threaded Connectors
SSMA Subminiature Coaxial Connectors
Introduction
2
RF Connectors
The success of the SMA
connector created a need
for a smaller version for
reduced packaging requirements. The SSMA series
was designed to a size
compatible with smaller
diameter semi-rigid cable.
The coupling thread is
10-36 UNS thread.
Design and Construction
As with the SMA series, all
shell and body parts are
made of stainless steel for
ruggedness and long life.
The dielectric is solid PTFE
fluorocarbon. The center
contacts are made of beryllium copper, gold plated.
Types
SSMA connectors are available for both semi-rigid and
flexible coaxial cable. Panel
and bulkhead mount, strip
transmission line type,
microstrip transmission type
and hermetically sealed
connectors and in-series
adapters give designers
complete flexibility for component and system design.
Upper Operating Frequency
Limits
The standard SSMA series
allows operation to 38.0
GHz. The extended frequency SSMA series allows
high order mode free operation beyond 40.0 GHz. The
extended frequency series
directly mates with the
standard SSMA series with
minimum discontinuity.
2-65
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Threaded Connectors
SSMA Subminiature Coaxial Connectors (Continued)
Interface Mating Dimensions
F
D
G Dia.
Reference Note
Note 2
H Dia.
Plug B
C
C
J
A B
Dia. Dia.
Note 1
.190-36
UNS-2B Thd.
E
D
G Dia.
A
B
Dia. Dia.
Reference Plane
Note 2
.190-36
D
UNS-2A Thd.
G
E
F
H
J
H Dia.
Jack
Plug A
Plug
Dim.
A
B
C
D
E
F
G
H
J
Jack
Min.
.196
4.98
.124
3.15
.100
2.54
.000
0.00
.050
1.27
.000
0.00
.020
0.50
.000
0.00
Max.
.202
5.13
.127
3.22
.133
3.38
.007
0.25
.065
1.65
.010
0.25
.021
0.53
.010
0.25
Dim.
70°
95°
J
A
B
C
D
E
F
G
H
Min.
.153
3.89
.127
3.23
.075
1.91
.000
0.00
.020
0.51
.075
1.91
.000
0.00
.190
4.83
.230
5.84
Max.
.160
4.06
.130
3.30
.077
1.96
.007
0.25
.040
1.02
—
.010
0.25
.210
5.33
—
1. ID to meet VSWR and contact resistance when mated with
.020 +.0008/-.0005 [0.51 +.0203/-.0127] dia. pin.
2. When fully engaged, the two reference planes must coincide with metal
to metal contact.
2-66
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Threaded Connectors
SSMA Subminiature Coaxial Connectors (Continued)
Specifications
General
Steel corrosion resistant per ASTM-A-582 and ASTM-A-484, Type 303. Beryllium copper per
ASTM B 196. PTFE Fluorocarbon per ASTM-D-1457.
Center contacts shall be gold plated to a min. thickness of .00005 [0.0013] in accordance with
MIL-G-45204, Typ I, Grade C. All other metal parts shall be finished as to provide a connector
meets the corrosion requirements.
The design shall be such that the outline shown in this catalog and the interface dimensions of
MIL-STD-348A are met.
Materials
Finishes
which
Design
2
Insulation Resistance
Corona Level
Dielectric Withstanding Voltage
RF HIgh Potential
Contact Resistance
VSWR
RF Leakage
Insertion Loss
RF Connectors
Electrical
The insulation resistance shall not be less than 5,000 megohms.
The connector shall not exhibit breakdown when the voltage is 190 volts rms at 70,000 ft.
The magnitude of the test voltage shall be 750 volts rms at sea level.
The withstanding voltage is 500 volts rms at 5 MHz. Leakage current is not applicable.
Center contact resistance: 2 milliohms max.
Outer contact resistance: 2 milliohms max.
Refer to applicable military slash sheet or consult factory. Frequency range dependent on
cable used.
Refer to applicable military slash sheet or consult factory.
Refer to applicable military slash sheet or consult factory. Frequency range dependent on
cable use.
Mechanical
Force to Engage
Coupling Nut Retention
Coupling Proof Torque
Cable Retention
Mating Characteristics
Connector Durability
Recommended Mating Torque
The torque required to engage and disengage shall not exceed 2 in.-lbs. The longitudinal force
is not applicable.
60 lbs. min. Applicable for plug connectors only.
5 in.-lbs. min. Applicable for plug connectors only.
Refer to applicable military slash sheet or consult factory.
Applicable to jack connectors only. Reference MIL-STD-348A for dimensions; oversize pin
.021 [0.53] min. dia., .045 [1.14] deep; insertion force 3 lbs. max. with .0208 [0.528] min. dia. pin;
withdrawal force 1 oz. min. with .0195 [0.495] max. dia. pin.
The connector to be tested and its mating connector shall be subjected to 500 insertion and
withdrawal cycles at 12 cycles per minute max. The connector shall show no evidence of
mechanical failure and shall meet the mating characteristic requirements.
5 in.-lbs.
Environmental
Vibration
Shock
Thermal Shock
Corrosion (Salt Spray)
Specification MIL-STD-202, method 204, test condition D.
Specification MIL-STD-202, method 213, test condition I.
Refer to applicable military slash sheet or consult factory.
Specification MIL-STD-202, method 101, test condition B.
Specification MIL-STD-202, method 106. No measurements at high humidity. Insulation resistance
shall be at least 200 megohms within 5 minutes of removal from humidity.
Moisture Resistance
2-67
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Threaded Connectors
SSMA Subminiature Coaxial Connectors (Continued)
For Semi-Rigid Cable
.085 [2.16] Dia. Direct
Solder Attachment
Straight Cable Plug
(Without Center Contact)
.330
Ref.
[8.38]
.250
[6.35]
Hex.
Part No.
Reference
Part No.
(Ref. Only)
1045370-1
1001-7985-02
RG/U
Cable
Dim.
A
.088
2.22 Min.
A Dia.
405
Electrical
DC — 40.0 GHz
Straight Cable Plug
(With Center Contact)
.330
.250
Ref.
[8.38]
[6.35]
A Dia. Hex.
.120
Dia.
[3.05]
B
Straight Cable Jack
(With Center Contact)
A Dia.
.187
[4.75]
Hex.
.500
[12.70]
Bulkhead Feed-through
Cable Jack
Lock Washer
Gasket
.250
[6.35]
.172
Min. Hex.
[4.37]
.192 Dia.
[4.88] Min.
.685
[17.40]
Recommended
Mounting Hole
Flange Mount Cable Jack
A Dia.
Right-Angle Cable Plug
.550
[13.97]
Ref.
A Dia.
Reference
Part No.
(Ref. Only)
1045351-1
1001-5004-02
1045358-1
1001-5045-92
1045381-1
1002-7985-00
Part No.
Reference
Part No.
(Ref. Only)
1045401-1
1004-7985-00
1045398-1
1004-5005-90
.375
[9.53]
Sq.
.232
[5.89]
Typ.
.250
[6.35]
Hex.
.120
Dia.
[3.05]
.088 Min.
2.22
.088 Min.
2.22
1045410-1
1006-7985-00
1045423-1
1007-7985-02
1045418-1
1007-5015-92
DSCC
Part No.
405
—
405
86116ZSG
.088 Min.
2.22
Dim.
A
Reference
Part No.
(Ref. Only)
Reference
Part No.
(Ref. Only)
RG/U
Cable
Dim.
A
Part No.
Part No.
Dim.
B
.088
.447
2.22 Min. 11.35 Ref.
.467
.088
2.22 Min. 11.86 Ref.
Reference
Part No.
(Ref. Only)
.120
[3.05]
A Dia.
.125 Max.
[3.18] Panel
.375
Hex.
[9.53]
Dim.
A
Part No.
.093 Dia.
[2.36] 4 Plcs.
.120
Dia.
[3.05]
.500
[12.70]
Part No.
DSCC
Part No.
405
—
405
86117ZSG
.088 Min.
2.22
.088 Min.
2.22
.088 Min.
2.22
405
RG/U
Cable
Dim.
A
Dim.
A
RG/U
Cable
RG/U
Cable
405
RG/U
Cable
DSCC
Part No.
405
—
405
86118ZSG
Finish: Passivated stainless steel, -02. For gold plated coupling nut, change the Part Number suffix from -02 to -00.
Inner housing that is soldered to cable is gold plated.
Refer to recommended assembly tools in Application Tooling Section.
2-68
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Threaded Connectors
SSMA Subminiature Coaxial Connectors (Continued)
For Flexible Cable — Solder Attachment
Straight Cable Plug1
.330
[8.38]
Heat Shrink
Tubing
.250 Hex.
[6.35]
1.250
Ref.
[31.75]
1045477-1
Reference
Part No.
(Ref. Only)
1031-5001-02
1045482-1
1031-5002-02
Part No.
RG/U
Cable
2
178/U, 196
174/U, 179,
187, 188, 316
RF Connectors
Straight Cable Jack
.187 Hex.
[4.75]
1.187
Ref.
[30.15]
1045496-1
Reference
Part No.
(Ref. Only)
1032-5001-00
1045497-1
1032-5002-00
Part No.
Heat Shrink
Tubing
RG/U
Cable
178/U, 196
174/U, 179,
187, 188, 316
Finish: Gold plated. Inner housing that is soldered to cable is gold plated.
.550
[13.97]
Ref.
Right-Angle Cable Plug1
.250
[6.35]
Hex.
.330
[8.38]
1.000
[25.40]
Ref.
1045507-1
1045508-1
Reference
Part No.
(Ref. Only)
1037-5001-00
1037-5001-02
1045511-1
1037-5002-02
Part No.
Heat
Shrink
Tubing
RG/U
Cable
178/U, 196
178/U, 196
174/U, 179,
187, 188, 316
For Flexible Cable — Crimp Attachment
Straight Cable Plug1, 2
1.281
Ref.
[32.54]
Reference
Part No.
(Ref. Only)
Part No.
A
Dim.
A
1045489-1 1031-7188-02
Heat Shrink Tubing
Bulkhead Feed-through Cable Jack1, 2
DSCC
Part No.
174/U, 179,
187, 188, 316
—
174, 316, 179
86119ZSG
1.400
Ref.
[35.56]
A
.177
Min.
[4.50]
.192
Min.
[4.88]
Recommended
Mounting Hole
Right-Angle Cable Plug1, 2
1045486-1 1031-5031-92
1.062 Ref.
26.97
1.062 Ref.
26.97
RG/U
Cable
.125 Max.
[3.18] Panel
Heat Shrink
Tubing
Part No.
Reference
Part No.
(Ref. Only)
1045506-1
1034-7196-02
1045503-1
1034-7188-02
Dim.
A
RG/U
Cable
1.050 Ref
26.67
1.180 Ref.
29.97
178/U, 196
174/U, 179,
187, 188, 316
.550
Ref.
[13.97]
A
B
.900
[22.86]
Ref.
Heat Shrink Tubing
Part No.
Reference
Part No.
(Ref. Only)
Dim.
A
1045520-1 1037-7188-02 .625 Ref
15.88
1045517-1 1037-5032-92 .625 Ref
15.88
Dim.
B
RG/U
Cable
DSCC
Part No.
.525 Ref. 174/U, 179,
—
13.34
187, 188, 316
.525 Ref. 174, 316, 179 86120ZSG
13.34
Refer to recommended assembly tools in Application Tooling Section.
1. Finish: Passivated stainless steel, -02. For gold plated coupling nut, change the Part Number suffix from -02 to -00.
Inner housing that is soldered to cable is gold plated.
2. Captured contact.
3. Non-captured contact
2-69
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Threaded Connectors
SSMA Subminiature Coaxial Connectors (Continued)
Panel Mount Receptacles
Solder Pot Terminals
Flange Mount Jack
Receptacle1
.575
[14.61]
.375
Sq.
[9.53]
.031 Dia.
[0.79] Min.
.050
Dia.
[1.27]
.575
[14.61]
Flange Mount Jack Receptacle1
Flange Mount Jack Receptacle1
.400
[10.16]
.021 Dia.
[0.53] Min.
.110
Dia.
[2.79]
.034
Dia.
[0.86]
1045568-1
.187
[4.75]
.050
Dia.
[1.27]
.093 Dia.
[2.36] 2 Plcs.
.645
[16.38]
Part No.
.093 Dia.
[2.36] 4 Plcs.
.031 Dia.
[0.79] Min.
.110
[2.79]
Dia.
Reference
Part No.
(Ref. Only)
1052-0000-00
.480
[12.19]
.375
[9.53]
Sq.
.093 Dia.
[2.36] 4 Plcs.
Reference
Part No.
(Ref. Only)
1052-1300-02
Reference
Part No.
(Ref. Only)
1054-5005-02
Part No.
1045582-1
Part No.
1045621-1
Bulkhead Mount
Receptacles
Solder Pot Terminals
Bulkhead Feed-through Jack
Receptacles1
.093 Max.
[2.36] Panel
.021 Dia.
[0.53] Min.
.600
[15.24]
Rear Mount
.110
Dia.
[2.79]
.034
Dia.
[0.86]
.177
Min.
[4.50]
.192 Dia.
[4.88] Min.
Reference
Part No.
(Ref. Only)
1056-0000-02
Part No.
1045630-1
Recommended
Mounting Hole
Rear Mount (With “O” Ring)
.600
[15.24]
.062 Max.
[1.57] Panel
.021 Dia.
[0.53] Min.
.110 Dia.
[2.79]
.177
Min.
[4.50]
.034
Dia.
[0.86]
Reference
Part No.
(Ref. Only)
1056-1100-02
Part No.
1045632-1
.192 Dia.
[4.88] Min.
Recommended
Mounting Hole
Turret Terminal
.600
[15.24]
Bulkhead Feed-through Jack
Receptacle1
Front Mount
.062 Max.
[1.57] Panel
.050
Dia.
[1.27]
.110
Dia.
[2.79]
.177
Min.
[4.50]
.192 Dia.
[4.88] Min.
Reference
Part No.
(Ref. Only)
1058-0000-02
Part No.
1045637-1
Recommended
Mounting Hole
Finish: Passivated stainless steel, -02. For gold plate, change the Part Number suffix from -02 to -00.
1. Captured Center Contact.
2-70
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Threaded Connectors
SSMA Subminiature Coaxial Connectors (Continued)
Panel Mount Receptacles
Straight Terminal
Flange Mount Jack
Receptacle2
.093 Dia.
[2.36] 4 Plcs.
.110
Dia.
[2.79]
.034
[0.86]
Dia.
.875
[22.23]
Reference
Part No.
(Ref. Only)
1052-1200-02
1052-1201-02
.375
Sq.
[9.53]
Part No.
1045576-1
1045578-1
2
RF Connectors
Tab Terminal
.093 Dia.
[2.36] 2 Plcs.
.004
Thick
[0.10]
x
.034 Wide
[0.86]
Flange Mount Jack
Receptacle2
Reference
Part No.
(Ref. Only)
1052-1302-02
.480
[12.19]
Part No.
1045586-1
.475
Ref. .187
[12.07]
[4.75]
Printed Circuit Boards
Straight Jack
.530
[13.46]
Right-Angle Jack
.040
Typ.
Sq.
[1.02]
4 Plcs.
.034
Dia.
[0.86]
.250
[6.35] Sq.
.499
[12.67]
.250
[6.35]
Sq.
.034
[0.86]
Dia.
.495
[12.57]
Circuits
Microstrip Transmission
Line Circuits, Flange
Mount Jack1
A
B
.005
[0.13]
Thick
Tab Terminal
.185 Dia.
[4.70]
Reference
Part No.
(Ref. Only)
1062-0000-00
Part No.
1045672-1
Finish: Gold plate.
Reference
Part No.
(Ref. Only)
1064-0000-00
Part No.
1045677-1
.040
Typ.
Sq.
[1.02]
4 Plcs.
.375
[9.53]
Sq.
Reference
Part No.
(Ref. Only)
Part No.
1052-1132-00
1045573-1
Dim.
A
Dim.
B
.600 Ref.
15.24
.125 Ref.
3.18
.093 Dia.
[2.36] 4 Plcs.
.093 Dia.
[2.36] 2 Plcs.
Solderless Compression
Terminal
.034 Dia.
[0.86]
.480
[12.19]
.086
[2.18]
.375
[9.53]
Reference
Part No.
(Ref. Only)
1052-5013-00
Part No.
1045607-1
.187
[4.75]
Finish: Passivated stainless steel, -02. For gold plate, change the Part Number suffix from -02 to -00.
1. Captured center contact.
2. Non-captured center contact.
2-71
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Threaded Connectors
SSMA Subminiature Coaxial Connectors (Continued)
Hermetically Sealed
Metal-To-Metal Hermetic Seal
Jack Receptacle With EMI/RFI
Gasket, Field Replaceable
Solder and Braze-In1, 4
EMI/RFI
Gasket
Accepts
Contact
.012 .001
[0.30 0.03]
.110 Max.
[2.79] Depth
.005
[0.13]
Min.
Electrical
.093 Dia.
[2.36] 2 Plcs.
.322
[8.18]
.076
Dia.
[1.93]
.480
[12.19]
.012 .001
[0.30 0.03]
Dia.
Reference
Part No.
(Ref. Only)
1052-3355-02
Part No.
1045598-1
.187
[4.75]
.375
[9.53]
VSWR (GHz) — 1.07 + .011f
RF Leakage (dB) — –(100 – fGHz)
Feed-through Jack Receptacle,
Formable Gasket2, 4
Formable
Gasket
.001
.162 +– .002
.001
.121 +– .000
0.03
[3.07 +– 0.00
]
Dia.
+ 0.03
[4.11 – 0.05 ]
Dia.
Electrical
.080
[2.03]
.451
[11.46]
VSWR (GHz) — 1.05 + .01f
RF Leakage (dB) — –(100 – fGHz)
Reference
Part No.
(Ref. Only)
1058-5014-00
Part No.
1045651-1
.250
[6.35]
Recommended
Mounting Hole
Mechanical
Installation Thermal Limit — 250°C
Feed-through Jack Receptacle,
Solder and Braze-In3
.012
Dia.
[0.30]
Electrical
.383
[9.73]
VSWR (GHz) — 1.05 + .014f
RF Leakage (dB) — –(100 – fGHz)
Panel Feed-through Jack
Receptacle, Solder and
Braze-In
VSWR (GHz) — 1.05 + .014f
RF Leakage (dB) — –(70 – fGHz)
A
.115
[2.92]
Part No.
1045647-1
.145
[3.68]
Dia.
.060
[1.53]
.015
Dia.
[0.38]
.400
[10.16]
Electrical
Reference
Part No.
(Ref. Only)
1058-3203-00
.145
[3.68]
Dia.
Reference
Part No.
(Ref. Only)
Part No.
Dim.
A
1058-3121-00
1045643-1
.093
2.36
1058-3123-00
1045646-1
.187
4.75
Finish: Gold plate.
1. Finish: Passivated stainless steel, -02. For gold plate, change the Part Number suffix from -02 to -00.
2. Finish: Gold plate, -00. For passivated stainless steel, change the Part Number suffix from -00 to -02. For nickel
plate, change the suffix from -00 to -10.
3. Finish: Gold plate, -00. This unit has a unique self-matching compensation step, allowing direct attachment to the
substrate, resulting in minimal package size.
4. Refer to recommended assembly tools in Application Tooling section.
2-72
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Threaded Connectors
SSMA Subminiature Coaxial Connectors (Continued)
Hermetically Sealed
(Continued)
Panel Feed-through
Hermetic Adapter
.312
[7.92]
Hex.
Jack to Jack1
.250-36, UNS-2A
.235
Min.
[5.97]
Electrical
VSWR (GHz) — 1.10 + .01f
RF Leakage (dB) — –(100 – fGHz)
.062 Max.
[1.57] Panel
Reference
Part No.
(Ref. Only)
1084-1100-00
Part No.
RF Connectors
.437
Dia.
[11.10]
.250
[6.35]
Min.
2
Lockwasher
Gasket
1045725-1
.229
.060 [5.82]
[1.52]
.411
[10.44]
Recommended
Mounting Hole
O-Ring Gasket Hermetic Seal
Flange Mount Jack Receptacle1, 2
O-Ring
.145
Dia.
[3.68]
.375
[9.53]
Electrical
.093 Dia.
[2.36] 4 Plcs.
.015
[0.38]
Dia.
.115
[2.92]
A
VSWR (GHz) — 1.05 + .01f
RF Leakage (dB) — –(70 – fGHz)
.192 Dia.
[4.88] Min.
Electrical
VSWR (GHz) — 1.05 + .014f
RF Leakage (dB) — –(70 – fGHz)
Part No.
Dim.
A
1052-3121-00
1045593-1
.093
2.36
.375
Sq.
[9.53]
Rear Mount Jack Receptacle1, 2
.172
[4.37]
Min.
Reference
Part No.
(Ref. Only)
Lockwasher
.312
Hex.
[7.92]
O-Ring
.250 Hex.
[6.35]
.015
Dia.
[0.38]
.093 Max.
[2.36] Panel
Recommended
Mounting Hole
Bulkhead Feed-through
Front Mount Jack Receptacle
Reference
Part No.
(Ref. Only)
1056-3100-00
Part No.
1045633-1
.115
[2.92]
.500
[12.70]
.312
Hex.
[7.92]
O-Ring
Electrical
.475
[12.07]
VSWR (GHz) — 1.05 + .01f
RF Leakage (dB) — –(70 – fGHz)
.015
[0.38]
Dia.
Reference
Part No.
(Ref. Only)
1058-3100-00
Part No.
1045642-1
.115
[2.92]
1. Finish: Gold plate, -00. For passivated stainless steel, change the Part Number suffix from -00 to -02.
2. On passivated versions (-02), pins are pre-tinned using Sn60 solder.
2-73
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Threaded Connectors
SSMA Subminiature Coaxial Connectors (Continued)
In-Series Adapters
Jack to Jack Adapter
.500
[12.70]
.156 Across
[3.96] Flats
Reference
Part No.
(Ref. Only)
1080-0000-02
.125
[3.18]
Part No.
1045701-1
Plug to Plug Adapter
.875
Ref.
[22.23]
.125
[3.18]
.250
Hex.
[6.35]
Reference
Part No.
(Ref. Only)
1081-0000-02
Part No.
1045704-1
.156 Across
[3.96] Flats
Plug to Jack Adapter
(Connector Saver)
.840
Ref.
[21.34]
.125
[3.18]
.250
Hex.
[6.35]
Reference
Part No.
(Ref. Only)
1082-0000-02
.156 Across
[3.96] Flats
Part No.
1045708-1
Bulkhead Mount Jack to
Jack Adapter
.172
Min.
[4.36]
.700
[17.78]
.070 Max.
[1.78] Panel
.192
Min.
[4.88]
Lockwasher
Recommended
Mounting Hole
.250
[6.35]
Hex.
Reference
Part No.
(Ref. Only)
1084-0000-02
Part No.
1045723-1
Right-Angle Plug to Jack
Adapter
.565
[14.35]
Ref.
.250
Hex.
[6.35]
.523
[13.28]
Reference
Part No.
(Ref. Only)
1088-0000-02
Part No.
1045747-1
Finish: Passivated stainless steel, -02. For gold plate, change the Part Number suffix from -02 to -00.
2-74
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Threaded Connectors
SSMA Subminiature Coaxial Connectors (Continued)
High Frequency For SemiRigid Cable
.085 [2.16] and .070 [1.78]
Dia. — Direct Solder
Attachment
Specifications
Insertion Loss — .04 x ⻫f (GHz) =
dB max.
Voltage Rating — 250 volts RMS
max. working voltage
Nominal Impedance — 50 ohms
Frequency Range — dc to 40 GHz
Voltage Standing Wave Ratio —
1.07 + .010 f (GHz)
Straight Cable Plug
(Without Center Contact)1, 3
.250
Hex.
[6.35]
Reference
Part No.
(Ref. Only)
Part No.
Dim.
A
RG/U
Cable
Cable
Dielectric
1001-7985-00
1045369-1
.087
2.2
405
Solid
PTFE
2
RF Connectors
.330
Ref.
[8.38]
A Dia.
Straight Cable Plug Center
Contact1, 3
A
Dia.
B
.250
Hex.
[6.35]
.120
Dia.
[3.05]
Reference
Part No.
(Ref. Only)
Part No.
Dim.
A
Dim.
B
RG/U
Cable
Cable
Dielectric
1401-7985-00
1046477-1
.088
2.22
.447
11.35
405
Solid
PTFE
Straight Cable Jack3
.500
[12.70]
A Dia.
.187
[4.75]
Hex.
.120
[3.05]
Dia.
Reference
Part No.
(Ref. Only)
Part No.
Dim.
A
RG/U
Cable
Cable
Dielectric
1402-7985-00
1046479-1
.088
2.22
405
Solid
PTFE
Finish: Gold plate.
Panel Mount —
Straight Terminal
Flange Mount Jack Receptacle2, 4
.093 Dia.
[2.36] 4 Plcs.
.100
Dia.
[2.54]
.875
[22.23]
Reference
Part No.
(Ref. Only)
1452-1201-02
.031 Dia.
[0.79]
Part No.
1086451-1
.375 Sq.
[9.53]
1. Finish: Gold plated, -00. For passivated stainless steel coupling nut, change the Part Number suffix from -00 to -02.
Inner housing that is soldered to cable is gold plated.
2. Finish: Passivated stainless steel, -02. For gold plate, change the Part Number suffix from -02 to -00.
3. Refer to recommended assembly tools in Appication Tooling Section.
4. Captured center contact.
2-75
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Coaxial Cable Termination
RF One-Step BNC/TNC Connectors
Product Facts
Easy, quick installation
Outstanding cable-retention
force
■ Solder-solder connection
type (center conductor and
braid)
■ One-step termination for
easy, quick installation and
lower installed cost
■ Exceptional cable retention
force to withstand high
vibration and frequent mates
and unmates
■ Fully soldered center
conductor and braid
■ Excellent built-in strain
relief against vibration and
excessive handling
■ Long-term reliability
■ Controlled soldering
termination
■ Use with standard RG/U
cables and Raychem brand
Cheminax cables
■ Three product sizes to
accommodate a wide range
of cables
■ Meets performance
requirements of
MIL-PRF-39012 up to 2.8 GHz
■
■
Specifications
TE Connectivity
RB-115
Applications
One-Step BNC/TNC connectors are single-piece
assemblies for terminating
the center conductor and
the braid of a broad range
of coaxial cables.
The connectors are fully
intermateable with
MIL-PRF-39012 connectors
and are available in 50-ohm
and 75-ohm versions.
Installation
For proper installation of these devices,
the correct heating tool and reflector
attachment must be used.
Any one of the following Raychem
heating tools is recommended:
• Steinel ® Model HL1802E
• CV-1981
Refer to TE installation procedure
RPIP 683-00 for detailed instructions.
2-76
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Coaxial Cable Termination
RF One-Step BNC/TNC Connectors (Continued)
Product Options and Part
Numbering System
RXX - XX - X - XX
Connector Style
Dash No.
-XX
Connector Type
Style
TNC
24.5 Max.
[.965]
24.5 max.
[.965]
Straight plug
31.5 max.
[1.23]
33.5 Max.
[1.32]
-01
Right-angle plug
25.4 Max.
[1.0]
Straight bulkhead jack
25.4 Max.
[1.0]
25.4 max.
[1.0]
-03
Straight jack
25.4 Max.
[1.0]
-04
Male
28 [1.09]
28 [1.09]
25.4 max.
[1.0]
-02
RF Connectors
-00
2
BNC
25.4 Max.
[1.0]
Female
Straight panel jack
4 x M2.5 x 0.45
4 x M2.5 x 0.45
Connector size
L = Large
M = Medium
S = Small
50 = 50 ohms
75 = 75 ohms
D = Nickel-plated brass body, gold-plated brass pin
B = BNC
T = TNC
Example: RBD-50-L-00 is a BNC connector, 50 ohms, large size, with straight plug body.
2-77
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Coaxial Cable Termination
RF One-Step BNC/TNC Connectors (Continued)
Product Characteristics
Solder
Insulation
Sleeve
Transition
Shield
Center
Contact
Dielectric
Insulator
Connector
Body
Insulation Sleeve
and Solder
Material
Gold-plated beryllium copper (female)
Gold-plated brass (male)
PTFE
Silver-plated brass
Nickel-plated brass
Sn63Pb37, RMA flux
Tin-plated copper wire per ASTM B3
Radiation-crosslinked, heat-shrinkable polyvinylidene fluoride, transparent blue
Radiation-crosslinked, heat-shrinkable modified polyolefin with adhesive, black
Center contact
Dielectric insulator
Transition
Connector body
Solder and flux
Braided shield
Insulation sleeve
Strain relief/sealing sleeve
Typical Performance
Dielectric withstand voltage
Insulation resistance
Temperature rating
Contact resistance-straight
Contact resistance — right-angle
Cable retention force
Voltage rating
Connector durability
1500 V
5000 megohms
-55˚C to 150˚C [-67˚F to 302˚F]
Inner = 1.5 milliohms, outer = 1.0 milliohm
Inner = 2.5 milliohms, outer = 1.5 milliohms
295N (66 lb) to 822N (196 lb)
500 V RMS
500 mating cycles minimum
Electrical Performance
Nominal impedance
Frequency range
50 and 75 ohms
Up to 2.8 GHz
Part Selection Process
1. From Product Options and Part Numbering System on page 2-35, select the connector style you need
(BNC or TNC, plug or jack, male or female contacts).
2. From the tables that follow, find the appropriate table for the connector style you selected.
3. From the appropriate table, select the connector part number based on the RG cable type or
Raychem cable part number. For cable types not shown use the cable dimensions.
Note: The cable dimensions in each table are keyed to the diagram below.
D
E
F
G
2-78
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Coaxial Cable Termination
RF One-Step BNC/TNC Connectors (Continued)
Cable Dimensions
E
F
(Min.–Max.)
(Max.)
RG Cables
BNC Straight Plugs, Male Contacts
RG-174, RG-178, RG-188,
50
RG-196,RG–316
RG-58, RG-141, RG-142,
50
RG-303, RG-400
RG-165, RG-215, RG-213,
50
RG-225, RG-214
75
Raychem Cables
G
(Max.)
5026A1311, 5028A1317,
5030A1317
5019D3318, 5021D1331,
5020A1311
5012F3332, 5012A3311
1.50–5.50
[.060–.217]
3.50–7.00
[.138–.276]
5.00–12.50
[.197–.500]
1.50–5.00
[.060–.217]
3.50–7.00
[.138–.276]
5.00–.12.50
[.197–.500]
0.90–3.00
[.035–.118]
2.10–5.00
[.083–.197]
4.10–9.50
[.161–.375]
5 0.90-3.00
[.035–.118]
2.10–5.00
[.083–.197]
4.10–9.50
[.161–.375]
1.55
[.060]
3.00
[.118]
7.30
[.287]
1.55
[.060]
3.70
[.126]
7.3
[.287]
0.65
[.025]
1.25
[.050]
2.45
[.100]
0.65
[.025]
1.25
[.050]
2.45
[.100]
RG-179, RG-187
7530A1317
75
—
7524A1311, 7528A1317
75
RG-6, RG-11, RG-12, RG-59
RG-144, RG-216
—
BNC Right-Angle Plugs, Male Contacts
RG-174, RG-178, RG-188,
50
RG-196,RG–316
RG-58, RG-141, RG-142,
50
RG-303, RG-400
RG-165, RG-215, RG-213,
50
RG-225, RG-214
5026A1311, 5028A1317,
5030A1317
5019D3318, 5021D1331,
5020A1311
5012F3332, 5012A3311
1.50–5.50
[.060–.217]
3.50–7.00
[.138–.276]
5.00–12.50
[.197–.500]
1.50–5.50
[.060–.217]
3.50–7.00
[.138–.276]
5.00–12.50
[.197–.500]
0.90–3.00
[.035–.118]
2.10–5.00
[.083–.197]
4.1–9.50
[.161–.375]
0.9-3.00
[.035–.118]
2.1–5.00
[.083–.197]
4.1–9.50
[.161–.375]
1.55
[.060]
3.00
[.118]
7.30
[.287]
1.55
[.060]
3.70
[.146]
7.30
[.287]
0.65
[.025]
1.25
[.050]
2.45
[.100]
0.65
[.025]
1.25
[.050]
2.45
[.100]
RG-179, RG-187
7530A1317
75
—
524A1311, 7528A1317
75
RG-6, RG-11, RG-12, RG-59
RG-144, RG-216
—
75
BNC Straight Bulkhead Jacks, Female Contacts
RG-174, RG-178, RG-188,
50
RG-196,RG–316
RG-58, RG-141, RG-142,
50
RG-303, RG-400
RG-165,
RG-215, RG-213,
50
RG-225, RG-214
5026A1311, 5028A1317,
5030A1317
5019D3318, 5021D1331,
5020A1311
1.50–5.50
[.060–.217]
3.50–7.00
[.138–.276]
5.00–12.50
[.197–.500]
1.50–5.00
[.060–.217]
3.50–7.00
[.138–.276]
5.00-12.50
[.197–.500]
0.90–3.00
[.035–.118]
2.10–5.00
[.083–.197]
4.10–9.50
[.161–.375]
5 0.90-3.00
[.035–.118]
2.10–5.00
[.083–.197]
4.10–9.50
[.161–.375]
1.55
[.060]
3.00
[.118]
7.30
[.287]
1.55
[.060]
3.70
[.146]
7.30
[.287]
0.65
[.025]
1.25
[.050]
2.45
[.100]
0.65
[.025]
1.25
[.050]
2.45
[.100]
5012F3332, 5012A3311
75
RG-179, RG-187
7530A1317
75
—
75 7524A1311, 7528A1317
75
RG-6, RG-11, RG-12, RG-59
RG-144, RG-216
—
BNC Straight Jacks, Female Contacts
RG-174, RG-178, RG-188,
50
RG-196,RG–316
RG-58,
RG-141, RG-142,
50
RG-303, RG-400
RG-165, RG-215, RG-213,
50
RG-225, RG-214
5026A1311, 5028A1317,
5030A1317
5019D3318, 5021D1331,
5020A1311
5012F3332, 5012A3311
1.50–5.50
[.060–.217]
3.50–7.00
[.138–.276]
5.00–12.50
[.197–.500]
1.50–5.50
[.060–.217]
3.50–7.00
[.138–.276]
5.00–12.50
[.197–.500]
0.90–3.00
[.035–.118]
2.10–5.00
[.083–.197]
4.10–9.50
[.161–.375]
0.90–3.00
[.035–.118]
2.10–5.00
[.083–.197]
4.10–9.50
[.161–.375]
1.55
[.060]
3.00
[.118]
7.30
[.287]
1.55
[.060]
3.70
[.146]
7.30
[.287]
0.65
[.025]
1.25
[.050]
2.45
[.100]
0.65
[.025]
1.25
[.050]
2.45
[.100]
75
RG-179, RG-187
7530A1317
75
—
75 7524A1311, 7528A1317
75
RG-6, RG-11, RG-12, RG-59
RG-144, RG-216
—
BNC Straight Panel Jacks, Female Contacts
RG-174, RG-178, RG-188,
50
RG-196,RG–316
RG-58, RG-141, RG-142,
50
RG-303, RG-400
RG-165, RG-215, RG-213,
50
RG-225, RG-214
75
5026A1311, 5028A1317,
5030A1317
5019D3318, 5021D1331,
5020A1311
5012F3332, 5012A3311
1.50–5.50
[.060–.217]
3.50–7.00
[.138–.276]
5.00–12.50
[.197–.500]
1.50–5.50
[.060–.217]
3.50–7.00
[.138–.276]
5.00–12.50
[.197–.500]
0.90–3.00
[.035–.118]
2.10–5.00
[.083–.197]
4.10–9.50
[.161–.375]
0.90–3.00
[.035–.118]
2.10–5.00
[.083–.197]
4.10–9.5o
[.161–.375]
1.55
[.060]
3.00
[.118]
7.30
[.287]
1.55
[.060]
3.70
[.146]
7.30
[.287]
0.65
[.025]
1.25
[.050]
2.45
[.100]
0.65
[.025]
1.25
[.050]
2.45
[.100]
RG-179, RG-187
7530A1317
75
—
7524A1311, 7528A1317
75
RG-6, RG-11, RG-12, RG-59
RG-144, RG-216
—
Part
No.
RBD-50-S-00
2
RBD-50-M-00
RBD-50-L-00
RF Connectors
D
(Min.–Max.)
Cable Type
Impedance
(ohms)
RBD-75-S-00
RBD-75-M-00
RBD-75-L-00
RBD-50-S-01
RBD-50-M-01
RBD-50-L-01
RBD-75-S-01
RBD-75-M-01
RBD-75-L-01
RBD-50-S-02
RBD-50-M-02
RBD-50-L-02
RBD-75-S-02
RBD-75-M-02
RBD-75-L-02
RBD-50-S-03
RBD-50-M-03
RBD-50-L-03
RBD-75-S-03
RBD-75-M-03
RBD-75-L-03
RBD-50-S-04
RBD-50-M-04
RBD-50-L-04
RBD-75-S-04
RBD-75-M-04
RBD-75-L-04
2-79
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Coaxial Cable Termination
RF One-Step BNC/TNC Connectors (Continued)
TNC Coaxial Connectors
D
(Min.–Max.)
Cable Dimensions
E
F
(Min.–Max.)
(Max.)
G
(Max.)
1.50–5.50
[.060–.217]
3.50–7.00
[.138–.276]
5.00–12.50
[.197–.500]
1.50–5.50
[.060–.217]
3.50–7.00
[.138–.276]
5.00–12.50
[.197–.500]
0.90–3.00
[.035–.118]
2.10–5.00
[.083–.197]
4.10–9.50
[.161–.375]
0.90-3.00
[.035–.118]
2.10–5.00
[.083–.197]
4.10–9.50
[.161–.375]
1.55
[.060]
3.00
[.118]
7.30
[.287]
1.55
[.060]
3.70
[.146]
7.30
[.287]
0.65
[.025]
1.25
[.050]
2.45
[.100]
0.65
[.025]
1.25
[.050]
2.45
[.100]
1.5–5.5
[.060–.217]
3.5–7.0
[.138–.276]
5.0–12.5
[.197–.500]
1.5–5.5
[.060–.217]
3.5–7.0
[.138–.276]
5.0–12.5
[.197–.500]
0.9–3.0
[.035–.118]
2.1–5.0
[.083–.197]
4.1–9.5
[.161–.375]
0.9–3.0
[.035–.118]
2.1–5.0
[.083–.197]
4.1–9.5
[.161–.375]
1.55
[.060]
3.0
[.118]
7.3
[.287]
1.55
[.060]
3.7
[.146]
7.3
[.287]
0.65
[.025]
1.25
[.050]
2.45
[.100]
0.65
[.025]
1.25
[.050]
2.45
[.100]
1.5–5.5
[.060–.217]
3.5–7.0
[.138–.276]
5.0–12.5
[.197–.500]
1.5–5.5
[.060–.217]
3.5–7.0
[.138–.276]
5.0–12.5
[.197–.500]
0.9–3.0
[.035–.118]
2.1–5.0
[.083–.197]
4.1–9.5
[.161–.375]
0.9–3.0
[.035–.118]
2.1–5.0
[.083–.197]
4.1–9.5
[.161–.375]
1.55
[.060]
3.0
[.118]
7.3
[.287]
1.55
[.060]
3.7
[.146]
7.3
[.287]
0.65
[.025]
1.25
[.050]
2.45
[.100]
0.65
[.025]
1.25
[.050]
2.45
[.100]
Cable Type
Impedance
(ohms)
RG Cables
TNC Straight Plugs, Male Contacts
RG-174, RG-178, RG-188,
50
RG-196,RG–316
RG-58,
RG-141, RG-142,
50
RG-303, RG-400
RG-165, RG-215, RG-213,
50
RG-225, RG-214
Raychem Cables
5026A1311, 5028A1317,
5030A1317
5019D3318, 5021D1331,
5020A1311
5012F3332, 5012A3311
75
RG-179, RG-187
7530A1317
75
—
7524A1311, 7528A1317
75
RG-6, RG-11, RG-12, RG-59
RG-144, RG-216
—
TNC Straight Jacks, Female Contacts
RG-174, RG-178, RG-188,
50
RG-196,RG–316
RG-58, RG-141, RG-142,
50
RG-303, RG-400
RG-165, RG-215, RG-213,
50
RG-225, RG-214
75
5026A1311, 5028A1317,
5030A1317
5019D3318, 5021D1331,
5020A1311
5012F3332, 5012A3311
RG-179, RG-187
7530A1317
75
—
7524A1311, 7528A1317
75
RG-6, RG-11, RG-12, RG-59
RG-144, RG-216
—
TNC Straight Panel Jacks, Female Contacts
RG-174, RG-178, RG-188,
50
RG-196,RG–316
RG-58, RG-141, RG-142,
50
RG-303, RG-400
RG-165, RG-215, RG-213,
50
RG-225, RG-214
75
5026A1311, 5028A1317,
5030A1317
5019D3318, 5021D1331,
5020A1311
5012F3332, 5012A3311
RG-179, RG-187
7530A1317
75
—
7524A1311, 7528A1317
75
RG-6, RG-11, RG-12, RG-59
RG-144, RG-216
—
Part
No.
RTD-50-S-00
RTD-50-M-00
RTD-50-L-00
RTD-75-S-00
RTD-75-M-00
RTD-75-L-00
RTD-50-S-03
RTD-50-M-03
RTD-50-L-03
RTD-75-S-03
RTD-75-M-03
RTD-75-L-03
RTD-50-S-04
RTD-50-M-04
RTD-50-L-04
RTD-75-S-04
RTD-75-M-04
RTD-75-L-04
2-80
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Coaxial Cable Termination
RF One-Step BNC/TNC Connectors (Continued)
TNC Coaxial Connectors
2
RF Connectors
D
(Min.–Max.)
Cable Dimensions
E
F
(Min.–Max.)
(Max.)
G
(Max.)
1.50–5.50
[.060–.217]
3.5–7.0
[.138–.276]
5.0–12.5
[.197–.500]
1.5–5.5
[.060–.217]
3.5–7.0
[.138–.276]
5.0–12.5
[.197–.500]
0.90–3.00
[.035–.118]
2.10–5.00
[.083–.197]
4.10–9.50
[.161–.375]
0.90–3.00
[.035–.118]
2.10–5.00
[.083–.197]
4.10–9.50
[.161–.375]
1.55
[.060]
3.00
[.118]
7.30
[.287]
1.55
[.060]
3.70
[.146]
7.30
[.287]
0.65
[.025]
1.25
[.050]
2.45
[.100]
0.65
[.025]
1.25
[.050]
2.45
[.100]
1.50–5.50
[.060–.217]
3.50–7.00
[.138–.276]
5.00–12.50
[.197–.500]
1.50–5.50
[.060–.217]
3.50–7.00
[.138–.276]
5.0–12.5
[.197–.500]
0.90–3.00
[.035–.118]
2.10–5.00
[.083–.197]
4.10–9.50
[.161–.375]
0.90–3.00
[.035–.118]
2.10–5.00
[.083–.197]
4.10–9.50
[.161–.375]
1.55
[.060]
3.00
[.118]
7.30
[.287]
1.55
[.060]
3.70
[.146]
7.30
[.287]
0.65
[.025]
1.25
[.050]
2.45
[.100]
0.65
[.025]
1.25
[.050]
2.45
[.100]
Cable Type
Impedance
(ohms)
RG Cables
TNC Straight Bulkhead Jacks, Female Contacts
RG-174, RG-178, RG-188,
50
RG-196,RG–316
RG-58, RG-141, RG-142,
50
RG-303, RG-400
RG-165, RG-215, RG-213,
50
RG-225, RG-214
75
Raychem Cables
5026A1311, 5028A1317,
5030A1317
5019D3318, 5021D1331,
5020A1311
5012F3332, 5012A3311
RG-179, RG-187
7530A1317
75
—
7524A1311, 7528A1317
75
RG-6, RG-11, RG-12, RG-59
RG-144, RG-216
—
TNC Right-Angle Plugs, Male Contacts
RG-174, RG-178, RG-188,
50
RG-196,RG–316
RG-58, RG-141, RG-142,
50
RG-303, RG-400
RG-165,
RG-215, RG-213,
50
RG-225, RG-214
5026A1311, 5028A1317,
5030A1317
5019D3318, 5021D1331,
5020A1311
5012F3332, 5012A3311
75
RG-179, RG-187
7530A1317
75
—
7524A1311, 7528A1317
75
RG-6, RG-11, RG-12, RG-59
RG-144, RG-216
—
Part
No.
RTD-50-S-02
RTD-50-M-02
RTD-50-L-02
RTD-75-S-02
RTD-75-M-02
RTD-75-L-02
RTD-50-S-01
RTD-50-M-01
RTD-50-L-01
RTD-75-S-01
RTD-75-M-01
RTD-75-L-01
2-81
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Application Tooling
Hand Tools
TE Connectivity CERTI-CRIMP Hand Tools are our top-ofthe-line crimping tools featuring the original ratcheted
crimp control. All tools are designed to exacting specifications, and manufactured using high quality materials to
provide long service life. Recommended for low production
runs, repairs and prototype work, and applications
requiring consistent, highly-reliable terminations.
See Catalog 65780 for further information.
Hand Tool Kit for SMA and Blindmate
Connectors
Part Number 59981-1
Typical CERTI-CRIMP Hand Tools with Integral
(Non-Interchangeable) Dies
Part Number 58537-1
(used with PRO-CRIMPER
Tool Frame 354940-1)
for 50 Ohm BNC Dual Crimp
MIL Type Connectors
Part Number 220015-1
for 50 Ohm N Connectors
Part Numbers
Item Description
CERTI-CRIMP Hand Tool
with Interchangeable Dies
Part Number 69710
Hand Tool
Plug Locator
(without Center Contact)
Plug Locator
(with Center Contact)
Jack Locator
Die Set for RG-402/U Cable
(.141 [3.58] O.D.)
Die Set for RG-405/U Cable
(.086 [2.18] O.D.)
Cutoff Fixture
Cable Dressing Fixture
Trimmer Tool
Cable Bend Fixture Assembly
Includes following 6 items:
Bend Segment, RG-402/U
(.125 [3.18] Radius)
Bend Segment, RG-402/U
(.250 [6.35] Radius)
Bend Segment, RG-405/U
Tool Holder
Limiting Pin
Conforming Block
Hex Wrench
Carrying Case
Insert, Case
59980-1
Military
(M22520/)
36-01
220220-2
36-06
TE
220221-2
36-04
220222-2
36-05
312253-1
36-03
312253-2
36-02
311395-1
311396-1
312317-1
36-09
36-07
36-08
220224-1
36-10
311386-1
36-11
311386-2
36-12
311386-3
311392-1
307581-1
312067-1
21027-6
13126-1
13127-1
36-13
—
—
—
—
—
—
2-82
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Application Tooling (Continued)
Solder Assembly Kit
Brass SMA Connectors
Item Description
Part No.
Kit Part Number 1055420-1
Center Contact Holder
(Reference Kit Part Number
2098-5066-54)
For installation of SMA
connectors to .035 [0.89]
and .141 [3.58] diameter
semi-rigid cable
Inserts
Locator Tools
Dielectric Insert Tool
2
RF Connectors
1055454-1
1055448-1
1055447-1
1055450-1
Dielectric Recess Tool
Fixture Sub-Assembly
1055439-1
Inserts — .085 [2.16] (2) 1055441-1
Inserts — .141 [3.58] (2) 1055440-1
1055442-1
1055443-1
Locator Tool
1055446-1
1055451-1
Retainer Ring Pliers
1055449-1
Solder Gauge .010 [0.25]
91362-6
91362-1
Solder Gauge .015 [0.38]
91362-2
Solder Gauge .018 [0.46]
Dielectric Insert Tool
Reference
Part No.
(Ref. Only)
2098-5221-10
2098-5215-02
2098-5214-02
2098-5217-54
2098-5206-54
2098-5208-54
2098-5207-54
2098-5209-02
2098-5210-02
2098-5213-02
2098-5218-02
2098-5216-54
2098-5516-02
2098-5212-02
2098-5211-02
Solder Gauge
Dielectric Recess Tool
Fixture Sub-Assembly
Retainer Ring Pliers
Center Contact Holder
Universal Compression
Crimp Tool
Kit Part Number 1055835-1
(Reference Kit Part Number
2598-5200-54)
TE Connectivity Universal
Compression Crimp Tool
offers the ability to rapidly
produce cable assemblies
using solderless compression crimp connectors with
semi-rigid cables. This universal assembly tool kit will
attach SMA, OSP (BMA), N
and TNC series connectors
to .141 [3.58], .085 [2.16]
and .250 [6.35] cable
quickly and consistently
with excellent mechanical
and electrical results.
The tool kit permits single
hand assembly. Anvils and
cable supports can be
quickly changed. Crimp
lengths can be adjusted
from .001 [.025] to 1.000
[25.4] in increments of .001
[.025]. Sharp radius bends
in cables are easily accommodated. The kit contains:
Crimp Frame
Anvil
Cable Supports
Description
Crimp Frame
Calibration Gauge
.141 [3.58] Cable Support
.085 [2.16] Cable Support
SMA Plug Anvil
SMA Jack Anvil
Type N Plug Anvil
Type N Jack Anvil
TNC Plug Anvil
TNC Jack Anvil
OSP (BMA) Plug Anvil
OSP (BMA) Jack Anvil
Gauge
Part No.
1055831-1
1055832-1
1055833-1
1055834-1
1055836-1
1055837-1
1055838-1
1055839-1
1055840-1
1055841-1
1055842-1
1055843-1
Reference Part No. (Ref. Only)
2598-5196-54
2598-5197-54
2598-5198-54
2598-5199-54
2598-5201-54
2598-5202-54
2598-5203-54
2598-5204-54
2598-5205-54
2598-5206-54
2598-5207-54
2598-5208-54
All tools may be purchased separately.
2-83
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Application Tooling (Continued)
MIL-C-22520/10-01
Equivalent Hex Crimp Kit
The kit contains:
Part Number
Description
Kit Part Number 1055236-1
Crimp Tool
Die Change Tool
Hex Die — A, B, C
Hex Die — D, E
(Reference Kit Part Number
2098-0105-54)
For military specified applications requiring quick and
efficient cable to connector
attachment. Five popular
hex die sizes are available
to crimp the outer cable
conductor to connector
housings.
1060713-1
1060716-1
1060714-1
1060715-1
Reference
Part Number
(Ref. Only)
9098-5105-54
5698-5014-54
5698-5015-54
5698-5016-54
All tools may be purchased separately.
For the assembly of SMA connectors,
Accessory Kit Part Number 1055421-1 is required.
Die Change Tool
Hex Die
Crimp Tool
A basic instruction sheet, included with the kit, aids in proper die selection
Hex Die
Part Number
1060714-1
Reference
Hex Die
Part Number
(Ref. Only)
5698-5015-54
Die
Hex Size
±.003 [0.08]
A
.105
2.67
.213
5.41
.128
3.25
.178
4.52
.255
6.48
B
C
D
1060715-1
5698-5016-54
E
For Use With
RG/U Cable
178B & 196A
55B, 58C, 141A, 142B,
223, 303, & 400
174, 174B, 179, 187A,
188A, & 316
180B, 195A, & 122
59, 62A, 71B, 210, & 302
Additional Dies Available
SMA Crimp Tool
Accessory Kit
Hex Die
Part Number
Reference
Hex Die
Part Number
(Ref. Only)
Hex Size
±.003 [0.08]
For Use With
RG/U Cable
1055270-1
2098-0323-54
.151
3.84
RD316 Double Braid
The kit contains:
Description
Kit Part Number 1055421-1
(Reference Kit Part Number
2098-5067-54)
For installation of SMA
connectors to flexible
braided cable. Crimp type
SMA connectors require
Hex Crimp Kit Part Number
1055236-1.
Center Contact
Holder
Locator Tool
Locator Tool
Solder Gauge
.015 [0.38]
Part Number
Reference Part Number
(Ref. Only)
1055454-1
2098-5221-10
1055446-1
1055451-1
2098-5213-02
2098-5218-02
91362-1
2098-5212-02
All tools may be purchased separately.
Locator Tool
Solder Gauge
Center Contact Holder
2-84
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Application Tooling (Continued)
Stripping Tools
Semi-Rigid Cable Tooling
The hand-operated TE Connectivity Coaxial Cable Stripper
features interchangeable, color-coded blade cassettes
and V-blocks to accommodate 2- or 3-step stripping for
cable diameters ranging from 2.54 [.10] through 7.62 [.30].
You strip cable by simply clamping and rotating the tool
around the cable. See Instruction Sheet IS 2766 for further
information.
The tools listed here are designed specifically to strip and
terminate semi-rigid cable. These tools operate basically the
same as the flexible cable tools, in that they produce uniform terminations time after time, without heat damage from
soldering.
Part Number 59980-1
Frame only — does not include
dies and locator
Tool No.
603995-1
603995-2
603995-3
603995-5
603995-6
Manual Trim and Point Tool
TE offers a manual tool that
performs both trimming and
pointing operations. Tools
are available for .141 [3.58]
and .085 [2.16] diameter
semi-rigid cable. These
hand-operated tools are
ideally suited for engineering,
small production runs or
field use. They feature
tungsten carbide cutters
for durability up to 30 times
longer than the life of a
high speed steel cutter.
Replacement cutters are
interchangeable and may
be purchased separately.
Cable Benders for
Semi-Rigid Cable
Cable Bender
RF Connectors
For Use With
Connector Type
BNC Single Crimp
BNC Commercial and
UHF Miniature
UHF Standard
BNC MIL Type Dual Crimp
BNC Commercial Dual Crimp
2
Hand Tool for BNC and TNC
Semi-Rigid Cable Connectors
Tool
Part Number
Reference Tool
Part Number
(Ref. Only)
1055811-1
2598-5116-54
1055815-1
2598-5120-54
1055823-1
2598-5137-54
1055824-1
2598-5138-54
Cable
Trim Length
RG-402/U
(.141 [3.58])
RG-405/U
(.085 [2.16])
RG-402/U
(.141 [3.58])
RG-405/U
(.085 [2.16])
.085 Fixed
2.16
.070 Fixed
1.78
Adjustable*
Adjustable*
*Adjustable trim length from .050 [1.27] to .140 [3.56].
Replacement Cutters
Replacement Collets
Trimmer: Part Number
1055813-1
Pointer: Part Number
1055814-1
Part Number
Reference Part Number
(Ref. Only)
Cable
1055825-1
2598-5145-54
1055827-1
2598-5167-54
RG-402/U
(.141 [3.58])
RG-405/U
(.085 [2.16])
Description
Part Number
Reference Part Number
(Ref. Only)
Bend Radius*
Cable Bender for
RG-405/U (.085 [2.16])
Cable Bender for
RG-402/U (.141 [3.58])
1055479-1
2098-5287-54
1/4 [6.4] 3/8 [9.8]
1055478-1
2098-5286-54
3/8 [9.8] 1/2 [12.7]
*Radius of the bend is measured from the centerline of the cable.
Trimming Tools for
Semi-Rigid Cable
For soldered semi-rigid
cable connectors using the
cable center conductor as
its contact. These tools are
optional for most installations but recommended
for optimum connector
performance.
Trim Tool
Description
Part Number
Reference
Part Number
(Ref. Only)
Trim Tool for SMA Connectors
RG-402/U (.141 [3.58])
Trim Tool for SSMA Connectors
RG-405/U (.085 [2.16])
1055455-1
2098-5272-02
1055465-1
2098-5269-02
2-85
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Application Tooling (Continued)
Cable Trimmers for
Production
Cable Trimmers
Description
TE Connectivity cable
trimmers are designed for
production trimming of
RG-402/U (.141 [3.58]) and
RG-405/U (.085 [2.16])
coaxial cables in preparation
for connector installation.
The trimming operation produces an unusually clean,
burr-free cut with minimum
smear. The length and
depth of cut are adjustable.
Replacement hardware can
be used with either tool.
Part Number
RG-402/U (.141 [3.58])
RG-405/U (.085 [2.16])
1055526-1
1055530-1
Reference Part Number
(Ref. Only)
2098-5676-54
2098-5686-54
Replacement Hardware
1055524-1
Reference Part Number
(Ref. Only)
2098-5674-54
1055527-1
2098-5678-54
1055528-1
2098-5679-54
Part Number
Description
Saw Blade
Trim Saw Block
(.141 [3.58])
Trim Saw Block
(.085 [2.16])
Cable Pointers for
Production
TE cable pointers are
designed to point straight
and bent cables and are
adjustable for desired
center conductor length.
The cable pointers cut 90°
point on copper as well
as copper-clad center
conductors.
Cable Pointers
Part Number
Reference
Part Number
(Ref. Only)
Single Pointer
1055525-1
2098-5675-54
Single Pointer
1080269-1
2098-5685-54
Description
Cable
Replacement
Cutter
Part Number
Reference
Replacement
Cutter
Part Number
(Ref. Only)
RG-402/U
(.141 [3.58])
RG-405/U
(.085 [2.16])
1055529-1
2098-5681-54
Interface Inspection Gauges
TE offers Connector
Interface Gauges. They
have shock proof and fully
jeweled dial indicators. The
rugged construction of the
dial mechanism minimizes
the need for repair or
replacement.
spindle allowing for precise
measurements.
Like the gauge heads, the
plungers are specially
designed to provide
strength and durability.
The gauge heads are
manufactured from a corrosion resistant, hardening
stainless steel which is heat
treated for longer life. All
critical surfaces are ground
and lapped for precision fit
and superior surface finish.
The heads are securely
fastened onto the dial
indicator for no movement
between the gauge head
and the dial indicator
Connector
Type
Gauge Kit
Part Number
SMA
Jack
Plug
1055496-1
1055497-1
Reference
Gauge Kit
Part Number
(Ref. Only)
2098-5455-54
2098-5456-54
SMA Interface Example
2-86
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Application Tooling (Continued)
SSMA Connectors
Kit Part Number 1055466-1
(Reference Kit Part Number
2098-5270-54)
For installation of SSMA
connectors to .070 [1.78]
and .085 [2.16] diameter
semi-rigid cable.
Item Description
Part No.
Center Contact Holder
Inserts
Locator Tools
2
RF Connectors
1055463-1
1055458-1
Dielectric Insert Tool
1055459-1
1055460-1
Dielectric Recess Tool
Fixture Sub-Assembly
1055439-1
Inserts — .070 [1.78] (2) 1055547-1
Inserts — .085 [2.16] (2) 1055441-1
1055461-1
1055464-1
Locator Tool
1055456-1
1055457-1
Retainer Ring Pliers
1055449-1
Solder Gauge .015 [0.38]
91362-1
Reference
Part No.
(Ref. Only)
2098-5237-10
2098-5233-02
2098-5234-02
2098-5235-54
2098-5206-54
2098-5831-54
2098-5208-54
2098-5236-02
2098-5238-02
2098-5231-02
2098-5232-02
2098-5216-54
2098-5212-02
All tools may be purchased separately.
Dielectric Insert Tool
Solder Gauge
Retainer
Ring Pliers
Dielectric Recess Tool
Fixture Sub-Assembly
Center Contact Holder
Econo-Crimp Assembly Kit
Kit Part Number 1055779-1
(Reference Kit Part Number
2598-5005-54)
For quick and efficient cable
to connector attachment.
Five popular hex die sizes
are available to crimp the
outer cable conductor to
connector housings.
Item Description
Part No.
Crimp Tool
Hex Die — A, B, C
Hex Die — D, E
1055780-1
1055781-1
1055782-1
Reference
Part No.
(Ref. Only)
2598-5006-54
2598-5007-54
2598-5008-54
All tools may be purchased separately.
For the assembly of SMA connectors, Accessory Kit Part Number
2098-5067-54 is required. For SSMA connectors, Accessory Kit Part Number
2098-5272-54 is required.
Crimp Tool
Hex Die
Part Number
1055781-1
Reference
Hex Die
Part Number
(Ref. Only)
2598-5007-54
Die
Hex Size
±.003 [0.08]
A
.105
2.67
.213
5.41
.128
3.25
.178
4.52
.255
6.48
B
C
Hex Die
D
1055782-1
2598-5008-54
E
For Use With
RG/U Cable
178B & 196A
55B, 58C, 141A, 142B,
223, 303, & 400
174, 174B, 179, 187A,
188A, & 316
180B, 195A, & 122
59, 62A, 71B, 210, & 302
SSMA Crimp Tool Accessories
Kit Part Number 1055467-1
Locator Tool
(Reference Kit Model Number
T-550)
For installation of SSMA
connectors to flexible
braided cable. Crimp type
SSMA connectors require
Hex Crimp Kit Part Number
1055779-1.
Center Contact Holder
Part Number
Reference Part Number
(Ref. Only)
Center Contact
Holder
1055463-1
2098-5237-10
Locator Tool
1055461-1
1055464-1
2098-5236-02
2098-5238-02
Description
All tools may be purchased separately.
2-87
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Cross Reference
Military Part Number
M39012/01B0012
M39012/01B0013
M39012/01B007
M39012/01B008
M39012/02B008
M39012/03B0004
M39012/03B0005
M39012/05B0002
M39012/05B0002
M39012/05B0003
M39012/16B0004
M39012/16B0007
M39012/16B0008
M39012/17B0004
M39012/17B0008
M39012/19-0102
M39012/19B0003
M39012/19B0007
M39012/26B0005
M39012/26B0006
M39012/26B0007
M39012/26B0016
M39012/27B0005
M39012/27B0006
M39012/27B0015
M39012/27B0016
M39012/29B0005
M39012/55-3006
M39012/55-3007
M39012/55-3009
M39012/55-3025
M39012/55-3026
M39012/55-3028
M39012/55-3029
M39012/55-3106
M39012/55-3107
M39012/55-3109
M39012/55-3125
M39012/55-3126
M39012/55-3128
M39012/55-3129
M39012/55-3502
M39012/55-3602
M39012/55B3011
M39012/55B3012
Reference Part
Number (Ref. Only)
2031-5011-00
2031-5011-02
2031-8006-92
2031-8007-92
2031-8009-92
2031-5102-00
2031-5102-02
2031-8025-92
2031-5012-00
2031-5012-02
2031-8026-92
2031-5011-00
2031-5011-02
2031-8028-92
2031-8029-92
2031-8106-92
2031-8107-92
2031-8109-92
2031-5102-00
2031-5102-02
2031-8125-92
2031-5012-00
2031-5012-02
2031-8126-92
2031-5011-00
2031-5011-02
2031-8128-92
2031-8129-92
2031-5011-00
2031-5011-02
2031-8052-92
2031-5011-00
2031-5011-02
2031-8162-92
2031-5102-00
2031-5102-02
2031-8011-92
2031-5102-00
2031-5102-02
2031-8012-92
TE
Part No.
COTS
Part No.
1051660-1
1051661-1
225092-7
51692-4
225092-2
225092-1
225093-2
225094-2
225094-1
225014-2
225389-2
225014-3
2-331350-1
2-331350-9
331350
2-331351-1
331351
221313-2
1-331693-1
331693
225550-2
225550-6
225550-3
225550-1
225551-2
225551-6
225551-5
225551-1
225348-2
1051757-1
1051759-1
1051762-1
Military Part Number
M39012/55B3014
M39012/55B3015
M39012/55B3016
M39012/55B3019
M39012/55B3019
M39012/55B3021
M39012/55B3022
M39012/55B3023
M39012/55B3024
M39012/55B3112
M39012/55B3113
M39012/55B3114
M39012/55B3115
M39012/55B3116
M39012/55B3119
M39012/56-3006
M39012/56-3007
M39012/56-3008
M39012/56-3009
1051686-1
1051687-1
1051780-1
1051664-1
1051665-1
1051782-1
1051660-1
1051661-1
1051785-1
1051787-1
1051789-1
1051791-1
1051794-1
M39012/56-3010
M39012/56-3025
M39012/56-3026
M39012/56-3027
M39012/56-3028
1051686-1
1051687-1
M39012/56-3029
1051810-1
1051664-1
1051665-1
1051812-1
1051660-1
1051661-1
1051815-1
1051816-1
M39012/56-3106
M39012/56-3107
M39012/56-3108
M39012/56-3109
1051660-1
1051661-1
M39012/56-3110
1051660-1
1051661-1
M39012/56-3125
1051686-1
1051687-1
M39012/56-3126
1051664-1
1051665-1
M39012/56-3127
1051788-1
1051817-1
1051764-1
1051766-1
Reference Part
Number (Ref. Only)
2031-5055-00
2031-8014-92
2031-5005-00
2031-5005-02
2031-8015-92
2031-5005-00
2031-5005-02
2031-8016-92
2031-5012-00
2031-5012-02
2031-8019-92
2031-5012-00
2031-5012-02
2031-8112-92
2031-8113-92
2031-5055-00
2031-8114-92
2031-5005-00
2031-5005-02
2031-8115-92
2031-5005-00
2031-5005-02
2031-8116-92
2031-5012-00
2031-5012-02
2031-8119-92
2037-8006-92
2037-5006-00
2037-5006-02
2037-8007-92
2037-8008-92
2037-5005-00
2037-5005-02
2037-8009-92
2037-5005-00
2037-5005-02
2037-8010-92
2037-5100-00
2037-5100-02
2037-8025-92
2037-5008-00
2037-5008-02
2037-8026-92
2037-8027-92
2037-5007-00
2037-5007-02
2037-8028-92
2037-5056-00
2037-8029-92
2037-8106-92
2037-5006-00
2037-5006-02
2037-8107-92
2037-8108-92
2037-5005-00
2037-5005-02
2037-8109-92
2037-5005-00
2037-5005-02
2037-8110-92
2037-5100-00
2037-5100-02
2037-8125-92
2037-5008-00
2037-5008-02
2037-8126-92
2037-8127-92
TE
Part No.
COTS
Part No.
1051678-1
1051768-1
1051650-1
1051651-1
1051769-1
1051650-1
1051651-1
1051770-1
225532-4
1056413-1
225532-1
225532-3
1-225532-0
225532-9
1051664-1
1051665-1
1051797-1
1051798-1
1051678-1
1051799-1
1051650-1
1051651-1
1051800-1
1051650-1
1051651-1
1051801-1
221117-2
1051664-1
1051665-1
221117-1
1051664-1
1051665-1
1051804-1
1052149-1
1052066-1
1052067-1
1052151-1
1052152-1
1052062-1
1052063-1
1052154-1
1052062-1
1052063-1
1052155-1
1052097-1
1052098-1
1052171-1
1052075-1
1052076-1
1052173-1
1052174-1
1052071-1
1052072-1
1052176-1
1052092-1
1052177-1
1052179-1
1052066-1
1052067-1
1052181-1
1052182-1
1052062-1
1052063-1
1052184-1
1052062-1
1052063-1
1052185-1
1052097-1
1052098-1
1052201-1
1052075-1
1052076-1
1052203-1
1052204-1
COTS part numbers are commercial equivalents and are not military qualified.
2-88
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Cross Reference (Continued)
Military Part Number
M39012/56-3128
M39012/56-3129
M39012/56-3502
M39012/56-3602
M39012/56B3012
M39012/56B3013
M39012/56B3014
M39012/56B3015
M39012/56B3016
M39012/56B3017
M39012/56B3018
M39012/56B3019
M39012/56B3020
M39012/56B3021
M39012/56B3022
M39012/56B3022
M39012/56B3023
M39012/56B3024
M39012/56B3111
M39012/56B3112
M39012/56B3113
M39012/56B3114
M39012/56B3115
M39012/56B3116
M39012/56B3117
M39012/56B3118
M39012/56B3119
M39012/56B3120
M39012/56B3121
M39012/56B3122
2037-5007-00
2037-5007-02
2037-8022-92
2037-5007-00
2037-5007-02
2037-8023-92
2037-5056-00
2037-8024-92
2037-5100-00
2037-5100-02
2037-8111-92
2037-5008-02
2037-5008-00
2037-8112-92
2037-8113-92
2037-5056-00
2037-8114-92
2037-5007-00
2037-5007-02
2037-8115-92
2037-5007-00
2037-5007-02
2037-8116-92
2037-5056-00
2037-8117-92
2037-5008-00
2037-5008-02
2037-8118-92
2037-5008-00
2037-5008-02
2037-8119-92
2037-8120-92
2037-5056-00
2037-8121-92
2037-5007-00
2037-5007-02
2037-8122-92
TE
Part No.
COTS
Part No.
1052071-1
1052072-1
Military Part Number
1052092-1
M39012/56B3124
M39012/56B3123
1052206-1
1052207-1
1052071-1
1052072-1
M39012/57-3025
1052071-1
1052072-1
M39012/57-3026
1052178-1
1086723-1
1052075-1
1052076-1
1052156-1
1052157-1
1052158-1
M39012/57-3027
M39012/57-3028
M39012/57-3029
M39012/57-3502
1052092-1
1052159-1
M39012/57B3011
1052071-1
1052072-1
1052160-1
M39012/57B3012
1052071-1
1052072-1
1052161-1
1052092-1
1052162-1
1052097-1
1052098-1
1052163-1
1052075-1
1052076-1
1052165-1
1052166-1
M39012/57B3013
M39012/57B3014
M39012/57B3015
M39012/57B3017
M39012/57B3018
M39012/57B3019
1052071-1
1052072-1
1052168-1
M39012/57B3020
M39012/57B3021
1052071-1
1052072-1
M39012/57B3022
1052092-1
M39012/57B3023
1052097-1
1052098-1
M39012/57B3024
1052169-1
1052170-1
1052186-1
M39012/58-3025
1052076-1
1052075-1
1052187-1
1052188-1
1052092-1
1052189-1
1052071-1
1052072-1
1052190-1
1052071-1
1052072-1
1052191-1
1052092-1
1052192-1
1052075-1
1052076-1
1052193-1
1052075-1
1052076-1
1052194-1
1052195-1
M39012/58-3026
M39012/58-3027
M39012/58-3028
M39012/58-3029
M39012/58-3502
M39012/58B3011
M39012/58B3012
M39012/58B3013
M39012/58B3014
M39012/58B3015
M39012/58B3016
M39012/58B3017
M39012/58B3018
1052092-1
M39012/58B3019
1052196-1
1052071-1
1052072-1
1052197-1
TE
Part No.
M39012/58B3020
M39012/58B3021
COTS
Part No.
1052071-1
1052072-1
1052198-1
1052092-1
1052199-1
2
1051868-1
1051869-1
1051918-1
1051855-1
1051919-1
1051920-1
1051861-1
1051921-1
1051866-1
1051922-1
1051861-1
1051923-1
1051868-1
1051869-1
1051904-1
1051855-1
1051905-1
1051906-1
1051866-1
1051907-1
1051861-1
1051908-1
M39012/57B3016
1052092-1
1052167-1
225609-3
Reference Part
Number (Ref. Only)
2037-5007-00
2037-5007-02
2037-8123-92
2037-5056-00
2037-8124-92
2032-5026-00
2032-5026-02
2032-8025-92
2032-5003-02
2032-8026-92
2032-8027-92
2032-5007-00
2032-8028-92
2032-5021-00
2032-8029-92
2032-5007-00
2032-8052-92
2032-5026-00
2032-5026-02
2032-8011-92
2032-5003-02
2032-8012-92
2032-8013-92
2032-5021-00
2032-8014-92
2032-5007-00
2032-8015-92
RF Connectors
M39012/56B3011
Reference Part
Number (Ref. Only)
2037-5007-00
2037-5007-02
2037-8128-92
2037-5056-00
2037-8129-92
2037-5007-00
2037-5007-02
2037-8052-92
2037-5007-00
2037-5007-02
2037-8162-92
2037-5008-00
2037-5008-02
2037-8011-92
2037-8012-92
2037-8013-92
2037-5056-00
2037-8014-92
2037-5007-00
2037-5007-02
2037-8015-92
2037-5007-00
2037-5007-02
2037-8016-92
2037-5056-00
2037-8017-92
2037-5100-00
2037-5100-02
2037-8018-92
2037-5008-00
2037-5008-02
2037-8019-92
2037-8020-92
2037-5056-00
2037-8021-92
1051861-1
2032-8016-92
2032-5021-00
2032-8017-92
2032-5026-00
2032-5026-02
2032-8018-92
2032-5003-02
2032-8019-92
2032-8020-92
2032-5021-00
2032-8021-92
2032-5007-00
2032-8022-92
2032-5007-00
2032-8023-92
2032-5021-00
2032-8024-92
2036-5016-00
2036-8025-92
2036-5004-02
2036-8026-92
2036-8027-92
2036-8028-92
2036-8029-92
2036-8052-92
2036-5004-02
2036-8011-92
2036-5004-02
2036-8012-92
2036-8013-92
2036-8014-92
2036-8015-92
2036-8016-92
2036-5014-02
2036-8017-92
2036-5016-00
2036-8018-92
2036-5004-02
2036-8019-92
2036-8020-92
2036-5014-02
2036-8021-92
1051909-1
1051866-1
1051910-1
1051868-1
1051869-1
1051911-1
1051855-1
1051912-1
1051913-1
1051866-1
1051914-1
1051861-1
1051915-1
1051861-1
1051916-1
1051866-1
1051917-1
1052030-1
1052046-1
1052024-1
1052047-1
1052048-1
1052049-1
1052050-1
1052051-1
1052024-1
1052042-1
1052024-1
1254028-1
1484499-1
1484500-1
1052043-1
1484501-1
1087843-1
1484502-1
1052030-1
1052044-1
1052024-1
1484503-1
1484504-1
1087843-1
1484505-1
COTS part numbers are commercial equivalents and are not military qualified.
2-89
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Cross Reference (Continued)
Military Part Number
M39012/58B3022
M39012/58B3023
M39012/58B3024
M39012/59-3025
M39012/59-3026
M39012/59-3027
M39012/59-3028
M39012/59-3029
M39012/59-3502
M39012/59B3011
M39012/59B3012
M39012/59B3013
M39012/59B3014
M39012/59B3015
M39012/59B3016
M39012/59B3017
M39012/59B3018
M39012/59B3019
M39012/59B3020
M39012/59B3021
M39012/59B3022
M39012/59B3023
M39012/59B3024
M39012/60-3001
M39012/60-3002
M39012/61-3001
M39012/61-3002
M39012/79-3007
M39012/79-3008
M39012/79-3107
M39012/79-3108
M39012/79-3207
M39012/79-3307
M39012/79-3308
M39012/79-AF867286-2
M39012/79B3001
M39012/79B3002
M39012/79B3002
M39012/79B3003
M39012/79B3003
M39012/79B3003
M39012/79B3004
M39012/79B3004
M39012/79B3101
Reference Part
Number (Ref. Only)
2036-8022-92
2036-8023-92
2036-5014-02
2036-8024-92
2034-5031-00
2034-5031-02
2034-8025-92
2034-5005-00
2034-8026-92
2034-8027-92
2034-8028-92
2034-8029-92
2034-8052-92
2034-5031-00
2034-5031-02
2034-8011-92
2034-5005-00
2034-8012-92
2034-8013-92
2034-8014-92
2034-8015-92
2034-8016-92
2034-8017-92
2034-5031-00
2034-5031-02
2034-8018-92
2034-5005-00
2034-8019-92
2034-8020-92
2034-8021-92
2034-8022-92
2034-8023-92
2034-8024-92
2052-0000-00
2052-0000-02
2052-8001-92
2052-1300-00
2052-1300-02
2052-8002-92
2056-8011-92
2058-0000-00
2058-8012-92
2001-8007-92
2001-8008-92
2001-8107-92
2001-8108-92
2001-5032-00
2001-5032-02
2001-8001-92
2001-8002-92
2001-5003-00
2001-5003-02
2001-8002-92
2001-8003-92
2001-5385-02
2001-8991-92
2001-8203-92
2001-8004-92
2001-8204-92
2001-5032-00
2001-5032-02
2001-8101-92
TE
Part No.
1052045-1
1484506-1
COTS
Part No.
1087843-1
Military Part Number
M39012/79B3102
1484507-1
1051950-1
1051951-1
1051992-1
1051933-1
1051994-1
1051995-1
1051996-1
1051997-1
1051999-1
M39012/79B3103
M39012/79B3103
M39012/79B3103
M39012/79B3103
1051950-1
1051951-1
M39012/79B3104
M39012/79B3104
M39012/79B3104
M39012/80-3005
1362216-1
1051933-1
1051986-1
1083993-1
1331293-1
1253627-1
1221165-1
1484542-1
M39012/80-3006
M39012/80-3007
M39012/80-3008
1051950-1
1051951-1
1051987-1
M39012/80-3105
1051933-1
1051988-1
1484543-1
1087842-1
1051989-1
1051990-1
1051991-1
M39012/80-3106
M39012/80-3107
1052421-1
1052422-1
1052924-1
1052533-1
1052534-1
1052926-1
1053118-1
1053133-1
1484516-1
1050781-1
1050783-1
1050789-1
1050790-1
228639-3
228639-1
228634-1
221447-1
M39012/80-3108
M39012/80-3207
M39012/80-3207
M39012/80-3307
M39012/80-3308
M39012/80-3308
M39012/80B3003
M39012/80B3004
M39012/80B3103
M39012/80B3104
M39012/81-3005
M39012/81-3006
1050547-1
1050548-1
1050774-1
1058590-1
1050524-1
1050525-1
1050776-1
1050777-1
M39012/81-3007
M39012/81-3008
M39012/81-3207
M39012/81-3208
M39012/81B3001
M39012/81B3002
1050598-1
1050813-1
1089686-1
1050779-1
1050792-1
M39012/82-3005
M39012/82-3006
1050547-1
1050548-1
1050785-1
M39012/82-3007
M39012/82-3008
M39012/82-3207
M39012/82-3208
Reference Part
Number (Ref. Only)
2001-5003-00
2001-5003-02
2001-8102-92
2001-8103-92
2001-7685-02
2001-8303-92
2001-5385-02
2001-8981-92
2001-8104-92
2001-8304-92
2007-5055-00
2007-5055-02
2007-8005-92
2007-5054-00
2007-5054-02
2007-8006-92
2007-5055-00
2007-5055-02
2007-8007-92
2007-5054-00
2007-5054-02
2007-8008-92
2007-5054-00
2007-5054-02
2007-8105-92
2007-5055-00
2007-5055-02
2007-8106-92
2007-5054-00
2007-5054-02
2007-8107-92
2007-8108-92
2007-8003-92
2007-8004-92
2007-5055-00
2007-5055-02
2007-8103-92
2007-5054-00
2007-5054-02
2007-8104-92
2002-5016-00
2002-8005-90
2002-5015-00
2002-8006-90
2002-8007-92
2002-8008-92
2002-8207-92
2002-8208-92
2002-5016-00
2002-8001-90
2002-5015-00
2002-8002-90
2006-5012-00
2006-8005-90
2006-7941-00
2006-8006-90
2006-8007-92
2006-8008-92
2006-8207-92
2006-8208-92
TE
Part No.
COTS
Part No.
1050524-1
1050525-1
1050786-1
227868-1
1050787-1
1050744-1
1050797-1
1050598-1
1050812-1
227743-1
1050788-1
1050799-1
1051113-1
1051114-1
1051165-1
1051109-1
1051110-1
1051166-1
1051113-1
1051114-1
1051168-1
1051109-1
1051110-1
1051170-1
1051109-1
1051110-1
1051175-1
1051113-1
1051114-1
1051176-1
1051109-1
1051110-1
1051177-1
1051178-1
228583-3
228583-5
228583-1
228626-1
228626-5
1051163-1
1051164-1
1051113-1
1051114-1
1051173-1
1051109-1
1051110-1
1051174-1
1050859-1
1050926-1
1050854-1
1050928-1
1050929-1
1050931-1
1050934-1
1050935-1
1050859-1
1050923-1
1050854-1
1050924-1
1051049-1
1051091-1
1051081-1
1051092-1
1051093-1
1051094-1
1051097-1
1051098-1
COTS part numbers are commercial equivalents and are not military qualified.
2-90
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Cross Reference (Continued)
Military Part Number
M39012/82B3001
M39012/82B3002
M39012/83-3005
M39012/83-3006
M39012/83B3001
M39012/83B3002
M39012/92-3201
M39012/92-3301
M39012/92-3301
M39012/92-3301
M39012/92B3001
M39012/92B3001
M39012/92B3001
M39012/92B3101
M39012/92B3101
M39012/92B3101
M39012/92B3101
M39012/93-3001
M39012/93-3002
M39012/93-3003
M39012/94-3001
M39012/94-3002
M39012/94-3003
M55339/02-30001
M55339/28-30001
M55339/28-30002
M55339/29-30001
M55339/29-30101
M55339/31-30001
M83517/1-31001
M83517/1-31002
M83517/1-31003
M83517/1-31004
M83517/1-32001
M83517/1-32002
M83517/1-32003
M83517/1-32004
2001-8301-92
2001-8921-92
2001-8901-92
2001-8941-92
2001-8911-92
2001-8931-92
2001-8951-92
2062-0000-00
2062-8001-90
2062-8002-90
2062-8003-90
2064-0000-00
2064-8001-90
2064-8002-90
2064-8003-90
2088-0000-00
2088-0000-02
2088-8001-92
2084-1100-00
2084-1100-02
2084-8001-92
2084-8002-92
2081-0000-00
2081-0000-02
2081-8001-92
2081-0000-00
2081-0000-02
2081-8101-92
2080-0000-00
2080-0000-02
2081-8001-92
2052-8003-92
2052-1658-02
2052-8004-92
2052-5636-00
2052-5636-02
2052-8005-92
2052-1618-00
2052-1618-02
2052-8006-92
2052-8003-90
2052-1658-02
2052-8004-90
2052-5636-00
2052-5636-02
2052-8005-90
2052-1618-00
2052-1618-02
TE
Part No.
COTS
Part No.
1051049-1
1051087-1
1051081-1
1051088-1
1051018-1
1051026-1
1051013-1
1051027-1
1051028-1
1051029-1
1051032-1
Military Part Number
M83517/2-31001
M83517/2-31002
M83517/2-31003
M83517/2-31004
M83517/2-32001
M83517/2-32002
M83517/2-32003
M83517/2-32004
M83517/3-31001
1051005-1
1051033-1
1051018-1
1051022-1
1051013-1
1051023-1
1050791-1
228635-1
228635-6
1050796-1
1050808-1
1050805-1
1484517-1
227531-1
1050807-1
1050809-1
1050810-1
M83517/3-31002
M83517/3-31003
M83517/3-31004
M83517/3-31005
M83517/3-31006
M83517/3-31007
M83517/3-32001
M83517/3-32002
M83517/3-32003
M83517/3-32004
M83517/3-32005
1053354-1
1053372-1
1053374-1
1053376-1
1053378-1
1053396-1
1053398-1
1053400-1
M83517/3-32006
M83517/3-32007
M83517/4-31001
M83517/4-31002
M83517/4-31003
M83517/4-31004
M83517/4-31005
1055064-1
1055065-1
1055091-1
1054874-1
1054875-1
1054986-1
1054988-1
1053634-1
1053635-1
M83517/4-32001
M83517/4-32002
M83517/4-32003
M83517/4-32004
1053765-1
1053634-1
1053635-1
M83517/4-32005
1053488-1
1053489-1
1052577-1
M83517/5-31001
M83517/5-32002
M83517/6-31001
M83517/6-31002
1052897-1
1052898-1
M83517/6-32001
M83517/6-32002
1053767-1
1053633-1
1052928-1
1052930-1
1052932-1
1052565-1
1052566-1
1052934-1
1052927-1
1052577-1
1052929-1
1052897-1
1052898-1
1052931-1
1052565-1
1052566-1
M83517/7-31001
M83517/7-31002
M83517/7-32001
M83517/7-32002
M83517/8-31001
M83517/8-31002
M83517/8-32001
Reference Part
Number (Ref. Only)
2052-8006-90
2051-8001-92
2051-8002-92
2051-8003-92
2051-8004-92
2051-8001-90
2051-8002-90
2051-8003-90
2051-8004-90
2052-1650-02
2052-8007-92
2052-8008-92
2052-8009-92
2052-8010-92
2052-1612-02
2052-8011-92
2052-8012-92
2052-8013-92
2052-1612-02
2052-8007-90
2052-8008-90
2052-8009-90
2052-8010-90
2052-1612-02
2052-8011-90
2052-8012-90
2052-8013-90
2052-8014-92
2052-5674-00
2052-5674-02
2052-8015-92
2052-8016-92
2052-1215-00
2052-1215-02
2052-8017-92
2052-1201-00
2052-1201-02
2052-8018-92
2052-8014-90
2052-5674-00
2052-5674-02
2052-8015-90
2052-8016-90
2052-1215-00
2052-1215-02
2052-8017-90
2052-1201-00
2052-1201-02
2052-8018-90
2051-8005-92
2051-8005-90
2066-8001-92
2066-1403-00
2066-8002-92
2066-8001-90
2066-1403-00
2066-8002-90
2067-8001-92
2067-8002-92
2067-8001-90
2067-8002-90
2068-5156-00
2068-8001-92
2068-8002-92
2068-5156-00
2068-8001-90
TE
Part No.
1052933-1
1052409-1
1052411-1
1052413-1
1052415-1
1052408-1
1052410-1
1052412-1
1052414-1
COTS
Part No.
2
RF Connectors
M39012/83-3007
M39012/83-3008
M39012/83-3207
M39012/83-3208
Reference Part
Number (Ref. Only)
2006-5012-00
2006-8001-90
2006-7941-00
2006-8002-90
2004-7985-00
2004-8005-90
2004-7941-00
2004-8006-90
2004-8007-92
2004-8008-92
2004-8207-92
2004-7641-02
2004-8208-92
2004-7985-00
2004-8001-90
2004-7941-00
2004-8002-90
2001-8201-92
1251095-1
1052936-1
1052938-1
1052940-1
1052942-1
1052563-1
1052944-1
1052946-1
1052948-1
1052563-1
1052935-1
1052937-1
1052939-1
1052941-1
1052563-1
1052943-1
1052945-1
1052947-1
1052950-1
1052901-1
1052902-1
1052952-1
1052954-1
1052527-1
1052528-1
1052956-1
1052522-1
1052523-1
1052958-1
1052949-1
1052901-1
1052902-1
1052951-1
1052953-1
1052527-1
1052528-1
1052955-1
1052522-1
1052523-1
1052957-1
1052417-1
1052416-1
1053423-1
1053415-1
1053425-1
1053422-1
1053415-1
1053424-1
1053429-1
1053431-1
1053428-1
1053430-1
1053438-1
1053451-1
1053453-1
1053438-1
1053450-1
COTS part numbers are commercial equivalents and are not military qualified.
2-91
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Cross Reference (Continued)
Military Part Number
M83517/8-32002
M83517/9-31001
M83517/9-31002
M83517/9-31003
M83517/9-31004
M83517/9-32001
M83517/9-32002
M83517/9-32003
M83517/9-32004
M83517/10-31001
M83517/10-31003
Reference Part
Number (Ref. Only)
2068-8002-90
2070-8001-92
2070-5068-02
2070-8002-92
2070-5069-02
2070-8003-92
2070-8004-92
2070-8001-90
2070-5068-02
2070-8002-90
2070-5069-02
2070-8003-90
2070-8004-90
2052-3359-02
2052-8019-92
2052-3358-02
TE
Part No.
1053452-1
1053476-1
COTS
Part No.
1053465-1
1053478-1
1053467-1
1053480-1
1053482-1
1053475-1
Military Part Number
M83517/10-31004
M83517/10-31005
M83517/10-31006
M83517/10-31015
M83517/10-31016
M83517/10-32001
1053465-1
1053477-1
M83517/10-32003
1053467-1
1053479-1
1053481-1
1052646-1
1052959-1
1052643-1
M83517/10-32005
M83517/10-32006
M83517/10-32015
M83517/10-32016
Reference Part
Number (Ref. Only)
2052-8021-92
2052-8023-92
2052-8023-92
2052-8024-92
2052-3358-02
2052-8033-92
2052-8034-92
2052-3359-02
2052-8019-90
2052-3358-02
2052-8021-90
2052-8023-90
2052-8024-90
2052-8033-90
2052-8034-90
TE
Part No.
1052962-1
1052963-1
1052963-1
1484518-1
COTS
Part No.
1052643-1
1484519-1
1484520-1
1052646-1
1484521-1
1052643-1
1052961-1
1484522-1
1484523-1
1484524-1
1484525-1
DSCC Cross Reference
DSCC
Part No.
84149SSG
84149SSG-1
84149SSGA
84149SSGA-1
85022SSG
85022SSG-1
85022SSGA
85022SSGA-1
85037SSG
85037SSGA
86116ZSG
86117ZSG
86118ZSG
Reference Part
Number (Ref. Only)
2001-5397-02
2001-5557-02
2001-5003-00
2001-5003-02
2001-5431-02
2001-5558-02
2001-7985-00
2001-7985-02
2006-5151-00
2006-5192-00
2006-5013-00
2006-5150-00
2006-5193-00
2006-5010-00
2007-5115-02
2007-5054-00
2007-5054-02
2007-5116-02
2007-5055-00
2007-5055-02
1001-5045-92
1004-5005-90
1007-5015-92
TE
Part No.
1050605-1
1050629-1
COTS
Part No.
1050524-1
1050525-1
1050609-1
1050631-1
1050769-1
1050770-1
1051063-1
1221162-1
1051052-1
1051062-1
1051067-1
1051046-1
1051119-1
1051109-1
1051110-1
1051120-1
1051113-1
1051114-1
1045358-1
1045398-1
1045418-1
DSCC
Part No.
86119ZSG
86120ZSG
94008ZCG-2
94008ZCG-1
94008ZCG-4
94008ZCG-3
94007ZCG-1
94007ZCG-2
8501814FP-1
8501814FP-2
8604412SP-1
8604412SP-4
8503812FP-1
8503812FP-2
8503812FP-3
8503812FP-4
8503812FP-5
8503812FP-6
8503812FP-7
Reference Part
Number (Ref. Only)
1031-5031-92
1037-5032-92
2902-5005-62
2902-5006-62
2908-5006-62
2908-5007-62
2980-5004-62
3180-4034-02
3180-4036-02
3081-4002-02
3082-4031-02
3080-4010-02
3080-4015-02
3084-4001-00
3082-4028-02
3082-4029-02
3080-4019-02
3080-4020-02
TE
Part No.
1045486-1
1045517-1
1056521-1
1056522-1
1056550-1
1056551-1
1056703-1
1757023-1
1057848-1
1080294-1
1057371-1
1057403-1
1057354-1
1057357-1
1057465-1
1057402-1
1252992-1
1057359-1
1087866-1
COTS
Part No.
Cheminax Coaxial Cables Cross Reference
SMA Plug
SMA R/A Plug
SMA BHD Jack
BNC Plug
BNC BHD Jack
TNC Plug
TNC BHD Jack
5024A3314
1996810-1
1996813-1
1996816-1
1996819-1
1996822-1
1996825-1
1996828-1
Cable to RF Part Numbers
5020A1611
1996811-1
1996814-1
1996817-1
1996820-1
1996823-1
1996826-1
1996829-1
5030L1134
1996812-1
1996815-1
1996818-1
1996821-1
1996824-1
1996827-1
1996830-1
COTS part numbers are commercial equivalents and are not military qualified.
2-92
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
NANONICS Coaxial Connectors
NANONICS Coaxial Connectors Introduction
2
RF Connectors
The NANONICS 50 ohm
coaxial connector system
combines the benefits of
the rectangular DUALOBE
connectors while offering
the flexibility to terminate
up to nine coaxial contacts
within the same metal
connector housing.
Furthermore, with this
unique design, five signal
contacts, terminated with
30 AWG or smaller discrete
wire, can also be integrated
into this connector package.
These connectors are
typically used in applications with frequencies up to
20 GHz.
receptacle coax connector
is also available in a
horizontal surface mount
configuration allowing for
wire to board applications.
Harness assemblies and
custom configurations can
also be accommodated.
RG-178 coax coaxial cable
is the standard cable used
on these connectors. The
Specifications
Technical and Performance
Data
Electrical
Contact Resistance — .003 - .008
ohms
Current Rating — 1 amp max. per
contact
Dielectric Withstanding Voltage —
Volts RMS 60 Hz at room ambient conditions. At sea level 500V. At 70,000 ft.
150V.
Insulation Resistance — 5000
megohms min. (@ 500 VDC) at room
ambient conditions.
Magnetic Permeability — 2 mu max.
Temperature Range — -55˚C to
+125˚C
Outer Coaxial Contacts — BeCu
Alloy plated with gold per MIL-G-45204
over nickel
Dielectric Insert — PTFE
Braid Termination — Soldered to
outer coaxial contacts with Sn63Pb37
solder
Backpotting — Standard for wire
terminations
2-93
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
NANONICS Coaxial Connectors
NANONICS Typical VSWR and Insertion Loss
Note: Insertion Loss of 30 AWG Coax
Cable @ (50 Ohm) is approximately
1.0db/ft. @ 3 GHz. The connector system
with 6" of coax on each side, is better than
1.5db @ 3 GHz.
2-94
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
NANONICS Coaxial Connectors
NANONICS 50 Ohm Coax Connectors
D
.100
[2.54]
.205
[5.21]
2
RF Connectors
Plug
.075
[1.91] 2 Plcs.
.117
[2.97]
B
C
.100
[2.54] Pitch
.078
[1.98] Typ.
.166
[4.22]
Receptacle
Plug Assembly
Drawing Number 1589070
Product Facts
■
■
■
■
Metal Shell
Standard Sizes: 1-9
Factory wired to your
specifications
Contact TE Connectivity for
custom configurations
D
.100
[2.54]
.112
[2.84] 2 Plcs.
.223
[5.66]
B
.078
[1.98] Typ.
B
.100
[2.54] Pitch
.166
[4.22]
C
Receptacle Assembly
Drawing Number 1589071
Size
1
2
3
4
5
6
7
8
9
B
0.254
0.354
0.454
0.554
0.654
0.754
0.854
0.954
1.054
[6.45]
[8.99]
[11.53]
[14.07]
[16.61]
[19.15]
[21.69]
[24.23]
[26.77]
Dimensions
C
0.335 [8.51]
0.435 [11.05]
0.535 [13.59]
0.635 [16.13]
0.735 [18.67]
0.835 [21.21]
0.935 [23.75]
1.035 [26.29]
1.135 [28.83]
D
0.180
0.280
0.380
0.480
0.580
0.680
0.780
0.880
0.980
[4.57]
[7.11]
[9.65]
[12.19]
[14.73]
[17.27]
[19.81]
[22.35]
[24.89]
No. Coax
1
2
3
4
5
6
7
8
9
2-95
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
NANONICS Coaxial Connectors
Part Numbering Guideline for NANONICS 50 Ohm Coax Connectors
Coax Only Connectors - Wire Terminations
CX
XXX
XX
RG
2
XXX
X
Class/Type
CX
Threads/Jackscrews
Coax, 50 Ohm
Positions
Threads (Receptacles Only)
Jackscrews (Plugs Only)
N Thread for 1.0 mm Jackscrews
M 1.0 mm Non Captive Jackscrews
Q Thread for 1.2 mm Jackscrews
N
1.0 mm Captive Jackscrews
Q
1.2 mm Captive Jackscrews
010 1 Position
020 2 Position
Conductor Length
030 3 Position
XXX
Three numbers only, length is in inches ( i.e. 012 = twelve inches)
040 4 Position
CXX
A “C” follwed by two numbers, length is in centimeters ( i.e. C06 = 6 centimeters)
050 5 Position
MXX
An “M” followed by two numbers, length is in meters ( i.e. M02 = 2 meters)
060 6 Position
070 7 Position
080 8 Position
Conductor Type
090 9 Position
RG
RG 178 Coaxial Cable
Configuration
Conductor Size
PC Plug
2
30 AWG
SC Receptacle
2-96
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
NANONICS Coaxial Connectors
NANONICS Horizontal SMT 50 Ohm Coax Connectors
.100
[2.54] Pitch
.0415
[1.05]
.0075
[.19] Typ.
A
2
.112
[2.84] 2 Plcs.
.223
[5.66]
RF Connectors
Surface Mount
B
Product Facts
B
■
■
■
■
Metal Shell
Standard Sizes: 1-9
Factory wired to your
specifications
Contact TE Connectivity for
custom configurations
.100
[2.54] Pitch
.078
[1.98] Typ.
.166
[4.22]
.024
[.61] Typ.
.323
[8.20] Typ.
C
Receptacle Assembly
Drawing Number 1589072
Size
1
2
3
4
5
6
7
8
9
A
0.0125 [.32]
0.0625 [1.59]
0.1125 [2.86]
0.1625 [4.13]
0.2125 [5.40]
0.2625 [6.67]
0.3125 [7.94]
0.3625 [9.21]
0.4125 [10.48]
Dimensions
B
0.254 [6.45]
0.354 [8.99]
0.454 [11.53]
0.554 [14.07]
0.654 [16.61]
0.754 [19.15]
0.854 [21.69]
0.954 [24.23]
1.054 [26.77]
C
0.335
0.435
0.535
0.635
0.735
0.835
0.935
1.035
1.135
[8.51]
[11.05]
[13.59]
[16.13]
[18.67]
[21.21]
[23.75]
[26.29]
[28.83]
No. Coax
1
2
3
4
5
6
7
8
9
2-97
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
NANONICS Coaxial Connectors
Part Numbering Guideline for NANONICS Horizontal SMT 50 Ohm Coax Connectors
Coax Only Connectors - SMT Termination
Class/Type
CX
XXX
L2
X
X
Jackscrew Threads
CX Coax, 50 ohm
Threads
N Thread for 1.0 mm Jackscrews
Positions
Q Thread for 1.2 mm Jackscrews
010 1 Position
020 2 Position
Mounting Hardware
030 3 Position
040 4 Position
050 5 Position
060 6 Position
A
1.2 mm x .160”
H
1.0 mm x .160”
Configuration
070 7 Position
L2
080 8 Position
Receptacle, Horizontal SMT
090 9 Position
2-98
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
NANONICS Coaxial Connectors
NANONICS 50 Ohm Coax with Mixed Signal Connectors
D
.100
[2.54]
.075
[1.91] 2 Plcs.
.205
[5.21]
2
.117
[2.97]
RF Connectors
Plug
B
.078
[1.98] Typ.
.038
[.97] 2 Plcs.
.118
Plcs.
[3.00] 2
C
.166
[4.22]
Receptacle
.050
[1.27]
.100
[2.54] Pitch
Product Facts
■
■
■
■
D
.025
[.64]
.100
[2.54]
Metal Shell
Standard Sizes: 1-9 coaxial
contacts with 5 signal
contacts
Factory wired to your
specifications
Contact TE Connectivity for
custom configurations
Plug Assembly
Drawing Number 1589068
.112
[2.84] 2 Plcs.
.223
[5.66]
B
B
.078
[1.98] Typ.
.038
[.97] 2 Plcs.
.166
[4.22]
.118
[3.00] 2 Plcs.
.025
[.64]
.050
[1.27]
.100
[2.54] Pitch
C
Receptacle Assembly
Drawing Number 1589069
Size
1
2
3
4
5
6
7
8
9
B
0.254
0.354
0.454
0.554
0.654
0.754
0.854
0.954
1.054
[6.45]
[8.99]
[11.53]
[14.07]
[16.61]
[19.15]
[21.69]
[24.23]
[26.77]
Dimensions
C
0.335 [8.51]
0.435 [11.05]
0.535 [13.59]
0.635 [16.13]
0.735 [18.67]
0.835 [21.21]
0.935 [23.75]
1.035 [26.29]
1.135 [28.83]
D
0.180
0.280
0.380
0.480
0.580
0.680
0.780
0.880
0.980
[4.57]
[7.11]
[9.65]
[12.19]
[14.73]
[17.27]
[19.81]
[22.35]
[24.89]
No. Coax
1
2
3
4
5
6
7
8
9
2-99
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
NANONICS Coaxial Connectors
Part Numbering Guideline for NANONICS 50 Ohm Coax with Mixed Signal Connectors
Coax w/ Mixed Signal Connectors - Wire Terminations
Class/Type
CX
XXX
XX
2
X
R
X
XXX
Threads/Jackscrew
CX Coax, 50 ohm
Positions
015 1 Position w/ 5 Signals
025 2 Position w/ 5 Signals
Threads (Receptacles Only)
Jackscrews (Plugs Only)
N Thread for 1.0 mm Jackscrews
M 1.0 mm Non Captive Jackscrews
Q Thread for 1.2 mm Jackscrews
N
1.0 mm Captive Jackscrews
Q
1.2 mm Captive Jackscrews
Conductor Length
035 3 Position w/ 5 Signals
045 4 Position w/ 5 Signals
055 5 Position w/ 5 Signals
065 6 Position w/ 5 Signals
XXX
Three numbers only, length is in inches ( i.e. 012 = twelve inches)
CXX
A “C” follwed by two numbers, length is in centimeters ( i.e. C06 = 6 centimeters)
MXX
An “M” followed by two numbers, length is in meters ( i.e. M02 = 2 meters)
075 7 Position w/ 5 Signals
Conductor Type (Signals)
085 8 Position w/ 5 Signals
095 9 Position w/ 5 Signals
C
Color Coded PTFE
X
White PTFE
Configuration
PC Plug
Conductor Type (Coax)
SC Receptacle
R
RG-178 Coaxial Cable
Conductor Size
2
30 AWG 7 Strand
2-100
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
NANONICS Coaxial Connectors
Part Number Index Cross Reference
NANONICS
Part Number
TE
Part Number
Coax Only
NANONICS
Part Number
TE
Part Number
Coax with Mixed Signals
0-1589070-1
0-1589070-2
2-1589070-8
0-1589070-3
2-1589070-1
2-1589071-3
0-1589070-4
2-1589070-5
1-1589070-8
2-1589071-0
2-1589071-5
0-1589071-8
2-1589071-8
2-1589071-2
0-1589070-5
0-1589070-6
0-1589070-7
0-1589070-8
0-1589070-9
2-1589070-4
2-1589070-6
0-1589071-3
0-1589071-4
1-1589071-8
2-1589071-1
1-1589070-0
1-1589070-1
3-1589070-7
1-1589070-7
0-1589071-5
0-1589071-7
1-1589070-4
1-1589071-9
3-1589070-8
3-1589070-3
3-1589070-5
3-1589070-0
3-1589070-1
3-1589070-2
2-1589070-0
2-1589071-6
2-1589070-3
2-1589070-2
3-1589070-9
3-1589070-4
3-1589070-6
2-1589070-9
1-1589070-5
1-1589070-6
1-1589070-9
2-1589070-7
2-1589071-4
2-1589071-7
1-1589071-7
0-1589071-9
1-1589070-2
0-1589071-6
CX015PC2RC012
CX015PC2RC012N
CX015SC2RC012N
CX035PC2RC006N
CX035PC2RC018N
CX035SC2RC006N
CX035SC2RC018N
CX045PC2RC006N
CX045PC2RC036N
CX045PC2RC036Q
CX045SC2RC006N
CX045SC2RC006Q
CX055PC2RC006N
CX055SC2RC006N
CX095PC2RC006N
CX095PC2RC036N
CX095SC2RC006N
0-1589068-1
0-1589068-5
0-1589069-1
0-1589068-2
0-1589068-3
0-1589069-2
0-1589069-3
0-1589068-4
0-1589068-9
1-1589068-0
0-1589069-4
0-1589069-7
0-1589068-6
0-1589069-5
0-1589068-7
0-1589068-8
0-1589069-6
TE
Part Number
Horizontal SMT Coax
CX010L2AQ
CX010L2HN
CX020L2HN
CX030L23N
CX030L23Q
CX030L2HN
CX040L2AQ
CX040L2HN
CX050L23Q
CX050L2HN
CX060L2AQ
CX060L2HN
CX070L2AQ
CX080L2HN
1-1589072-3
0-1589072-1
1-1589072-2
0-1589072-2
0-1589072-5
0-1589072-3
2
RF Connectors
CX010PC2RG006N
CX010PC2RG018N
CX010PC2RG048Q
CX010PC2RG072N
CX010PC2RGC10Q
CX010SC2RG048Q
CX020PC2RG018N
CX020PC2RG048N
CX020PC2RG060N
CX020SC2RG012N
CX020SC2RG018N
CX020SC2RG024N
CX020SC2RG024Q
CX020SC2RG060N
CX030PC2RG006N
CX030PC2RG012
CX030PC2RG012N
CX030PC2RG018N
CX030PC2RG020Q
CX030PC2RG048N
CX030PC2RG060N
CX030SC2RG006N
CX030SC2RG012
CX030SC2RG012N
CX030SC2RG060N
CX040PC2RG012N
CX040PC2RG030N
CX040PC2RG039Q
CX040PC2RG060N
CX040SC2RG012
CX040SC2RG024N
CX050PC2RG006N
CX050SC2RG006N
CX060PC2RG012N
CX060PC2RG012Q
CX060PC2RG018N
CX060PC2RG036N
CX060PC2RG072N
CX060PC2RG144N
CX060PC2RGC10Q
CX060SC2RG012Q
CX070PC2RGC10Q
CX080PC2RG006N
CX080PC2RG012N
CX080PC2RG012Q
CX080PC2RG018N
CX080PC2RG024N
CX080PC2RG036N
CX080PC2RG048N
CX080PC2RG060N
CX080PC2RGC10N
CX080SC2RG012N
CX080SC2RG012Q
CX080SC2RG015N
CX080SC2RG024N
CX090PC2RG036N
CX090SC2RG036N
NANONICS
Part Number
1-1589072-0
1-1589072-6
0-1589072-6
0-1589072-9
1-1589072-1
1-1589072-5
1-1589072-4
0-1589072-4
2-101
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Coaxial Connectors Introduction
Product Facts
■
Designed to accept 50,
70 and 93 ohm miniature
coaxial cables
■
Three types of connectors:
Screw-on Series, Slide-on
Series and Quick-Connect
Series
■
Temperature range —
-85°F to +257°F [-65°C to
+125°C] (with neoprene
gasket or bend relief cap)
-80°F to 392°F [-62°C to
+200°C] (with silicone gasket or bend relief cap)
■
Dielectric Withstanding
Voltage — 1000 volts RMS
at sea level
■
Contact Resistance —
3 milliohms max., D.C.
■
Captive Contacts —
Terminated connector
contacts captivated from
movement in both directions
MICRODOT Standard
Coaxial Connectors are
designed to accept 50,
70, and 93 Ohm miniature
coaxial cables. These
connectors are available as
Screw-On Series, Slide-On
Series, or Quick-Connect
Series. The Screw-On
Series is intermateable with
the Gold Plated Crimp Style
Coaxial Connector Series
and offers the dependability
of a threaded coupling. For
enhanced safety, choose
connectors with wire holes.
The Quick-Connect Series
offers the convenience of
Slide-On coupling with
added retention provided
by a snap ring located on
the jack/receptacle side.
Choose Slide-On Series for
the fastest, most convenient
mating and unmating.
Consult TE Connectivity
for special cable accommodations and mounting
features.
2-102
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Standard Connectors
Performance Data
Summary
For Standard Connectors
Environmental
Materials
Captive Contacts — Terminated
connector contacts captivated from
movement in both directions.
Cable Retention —
50 Ohm connectors, 15 lb. min.1
70 Ohm connectors, 25 lb. min.1
93 Ohm connectors, 35 lb. min.1
Recommended Coupling Torque
(Threaded Interface) —
8 inch/pounds max.
Recommended Receptacle
Mounting Torque (All Series) —
8 inch/pounds max.
Unmating Force (Slide-On Series) —
1-7 pounds.
Contact Protection (Unmated) —
Pin contact protected by coupling nut
(threaded series)2 or by housing (QuickConnect and Slide-On Series). Socket
protected by insulator and housing.
Temperature Range (Continuous
Service) — -85°F to +257°F [-65°C to
+125°C] (with Neoprene gasket or bend
relief cap). -80°F to 392°F [-62°C to
+200°C] (with Silicone gasket or bend
relief cap).
Vibration3,4 — MIL-STD-202, Method
204, Test condition B (15 G peak). No
physical damage or electrical discontinuities in excess of 1 microsecond.
Shock3,4 — MIL-STD-202, Method
213, Test Condition H. No physical
damage or electrical discontinuity after
shock.
Thermal Shock — MIL-STD-202,
Method 107, Test Condition B.
Moisture Resistance3 — MIL-STD202, Method 106.
Salt Spray3 — MIL-STD-202, Method
101, Test Condition B (48 hours).
Housing, Nut, Jerk Ring — Brass
per ASTM-B-16.
Insulator — PTFE per
ASTM-D-1710.
Pin Contact (Plugs) — Brass per
ASTM-B-16.
Socket Contact (Jacks &
Receptacles) — Beryllium Copper
per ASTM-B-196.
Bend Relief Caps (Plugs & Jacks) —
Neoprene or Silicone Rubber per
ZZ-R-765.
Gaskets (Jacks & Receptacles) —
Neoprene or Silicone Rubber per
ZZ-R-765.
Lockwasher — #425 Bronze Alloy.
Assembly Methods
Electrical
Straight Plugs & Jacks —
Cable Inner Conductor — Soldered
to contact.
Cable Shield — Crimped to jerk ring
(solder optional).
Angle Plugs —
Cable Inner Conductor — Soldered
to contact.
Cable Shield — Soldered to ring &
housing.
Impedance — Designed to be compatible with 50, 70, or 93 Ohm miniature
coaxial cable.
Dielectric Withstanding Voltage —
1000 volts RMS at sea level.
Contact Resistance — 3 milliohms
max., D.C.
Current Capacity — 3 amps, D.C.
Insulation Resistance — 5 x 103
Megohms min. @ 500 volts D.C.
Voltage Standing Wave Ratio5
(VSWR) — Typical 50 Ohm series, 1.2
max. to 2 GHz.
2
RF Connectors
Mechanical
Plating
Contacts — Gold per MIL-G-45204,
Type II, Grade C, Class 1.
Housing, Nut, Jerk Ring,
Lockwasher — Silver per QQ-S-365,
Type II, Grade A, .0002 [.005] min.
Notes:
1
Termination to cables with foamed
dielectrics excluded. Straight connector jerk rings must be soldered
to cable shield.
2
Pin protector required. See individual connector specifications.
3
Screw-On Series, threaded interface.
4
TE Connectivity recommends the
use of safety wired connectors in
vibration and shock environment.
See individual specifications for
connectors with safety wire holes.
5
VSWR is a system specification.
Where performance is critical,
purchase TE cable assemblies with
Screw-On or Quick-Connect Series
connectors and specify VSWR
testing and mating connector part
number.
2-103
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Standard Connectors — Screw-On Series
Jack
S-50 Ohm Series
031-0034-0001
051-0467-0001
S-70 Ohm Series
031-0036-0001
031-0090-0001
S-93 Ohm Series
031-0037-0001
031-0088-0001
S-70 Ohm Series
031-0048-0001
S-93 Ohm Series
031-0032-0001
031-0089-0001
S-70 Ohm Series
031-0051-0001
S-93 Ohm Series
031-0052-0001
S-70 Ohm Series
031-0017-0001
031-0018-0001
S-93 Ohm Series
031-0016-0001
031-0019-0001
031-0046-0001
Plug
S-50 Ohm Series
032-0021-0001
032-0023-0001
032-0025-0001
032-0033-0001
032-0097-0001
032-0098-0001
032-0155-0001
032-0156-0001
052-0213-0001
052-0235-0001
052-0235-0003
052-0370-0001
052-0542-0001
S-70 Ohm Series
032-0010-0001
032-0022-0001
032-0067-0001
032-0078-0001
032-0222-0001
052-0092-0001
S-93 Ohm Series
032-0011-0001
032-0017-0001
032-0066-0001
032-0071-0001
032-0092-0001
032-0099-0001
052-0200-0001
Bulkhead Jack
S-50 Ohm Series
031-0033-0001
Receptacle
S-50 Ohm Series
031-0050-0001
051-0318-0001
Right-Angle Plug
S-50 Ohm Series
032-0015-0001
052-0204-0001
052-0215-0001
052-0337-0001
S-70 Ohm Series
032-0013-0001
052-0299-0001
052-0379-0001
S-93 Ohm Series
032-0014-0001
032-0068-0001
032-0153-0001
052-0207-0001
052-0298-0001
052-0304-0022
Receptacle
S-50 Ohm Series
031-0001-0001
031-0001-0003
031-0002-0001
031-0003-0001
031-0024-0001
051-0125-0001
Printed Circuit Receptacle
S-50 Ohm Series
031-0059-0001
031-0062-0001
051-0450-0001
S-70 Ohm Series
031-0069-0001
Right-Angle Printed Circuit Receptacle
S-93 Ohm Series
031-0067-0001
031-0080-0001
S-50 Ohm Series
031-0061-0001
051-0459-0001
S-70 Ohm Series
031-0072-0001
S-93 Ohm Series
031-0073-0001
2-104
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Standard Connectors — Screw-On Series (Continued)
Plugs
A
S-50, 70 & 93
B
.030–.033
Pin
[.762–.838]
Dim.
A
Dim.
B
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
Assembly
Tool
1
408-8521
RF-ASMB-88
010-0003-0000
1
Cable Jacket
Max.
S-50 Series (50 Ohm) .190 [4.83] -32 UNF-2B Thread
.745
.230 Dia.
032-0021-0001
18.92
5.84
.745
.230
032-0023-0001
Dia.
18.92
5.84
.230
.745
032-0025-0001
5.84 Dia.
18.92
.745
.230
032-0033-0001
18.92
5.84 Dia.
.745
.250 Hex.
032-0097-0001
18.92
6.35
.250
.745
032-0098-0001
6.35 Hex.
18.92
.250
.700
032-0155-0001
17.78
6.35 Hex.
.700
.250
032-0156-0001
Dia.
17.78
6.35
.745
.250 Hex.
052-0213-0001
18.92
6.35
.745
.250
052-0235-0001
Hex.
18.92
6.35
.745
.250
052-0235-0003
Hex.
18.92
6.35
.745
.250
052-0370-0001
Hex.
18.92
6.35
.745
.250 Hex.
052-0542-0001
18.92
6.35
S-70 Series (70 Ohm) .216 [5.49] -32 UNEF-2B Thread
.760
.255 Dia.
032-0010-0001
19.30
6.48
.760
.255 Dia.
032-0022-0001
19.30
6.48
.755
.255
032-0067-0001
Dia.
19.18
6.48
.755
.255
032-0078-0001
Dia.
19.18
6.48
.760
.281
032-0222-0001
Hex.
19.30
7.14
.760
.255 Dia.
052-0092-0001
19.30
6.48
S-93 Series (93 Ohm) .250 [6.35] -32 UNEF-2B Thread
.760
.320
032-0011-0001
19.30
8.13 Dia.
.760
.320 Dia.
032-0017-0001
19.30
8.13
.950
.350
032-0066-0001
24.13
8.89 Dia.
.760
.320
032-0071-0001
19.30
8.13 Dia.
.760
.320
032-0092-0001
19.30
8.13 Dia.
.760
.312 Hex.
032-0099-0001
19.30
7.92
.760
.312
052-0200-0001
19.30
7.92 Hex.
.087
2.21
.087
2.21
.093
2.36
.093
2.36
.087
2.21
.087
2.21
.088
2.24
.088
2.24
.087
2.21
.087
2.21
.087
2.21
.093
2.36
.087
2.21
.093
2.36
.093
2.36
.108
2.74
.108
2.74
.093
2.36
.093
2.36
.134
3.40
.134
3.40
.154
3.91
.134
3.40
.155
3.94
.134
3.40
.134
3.40
Special Features
Solderless Assembly
408-8522
RF-ASMB-89
010-0003-0000
1
408-8521
RF-ASMB-88
010-0003-0000
1
408-8522
RF-ASMB-89
010-0003-0000
1
Solderless Assembly, Hex Nut
408-8521
RF-ASMB-88
010-0003-0000
Hex Nut
408-8522
RF-ASMB-89
010-0003-0000
408-8522
RF-ASMB-89
010-0003-0000
408-8522
RF-ASMB-89
010-0003-0000
408-8521
RF-ASMB-88
010-0003-0000
Solderless Assembly
Hex Nut, .187 [4.75]
Hex Cable Clamp Nut
1, 2
.187 [4.75]
Hex Cable Clamp Nut
1
Solderless, Hex Nut w/ Safety
Wire Holes, .021 [0.53] Wire Max.
RF Connectors
Part No.
2
Pin Protector
1, 2
Hex Nut
408-8522
RF-ASMB-89
010-0003-0000
Hex Nut w/ Safety Wire Holes,
.021 [0.53] Wire Max.
1
Hex Nut, Designed for
Dual Shield Cable
408-8522
RF-ASMB-89
010-0003-0000
408-8522
RF-ASMB-89
010-0003-0000
Hex Nut
408-8522
RF-ASMB-89
010-0003-0000
1
Solderless Assembly
408-8521
RF-ASMB-88
010-0004-0000
1
408-8525
RF-ASMB-95
010-0004-0000
1
408-8522
RF-ASMB-89
010-0035-0000
Solderless Assembly
408-8521
RF-ASMB-88
010-0035-0000
Hex Nut w/ Safety Wire Holes,
.014 [0.35] Wire Max.
408-8525
RF-ASMB-95
010-0004-0000
408-8525
RF-ASMB-95
010-0004-0000
1
408-8521
RF-ASMB-88
010-0005-0000
1
408-8525
RF-ASMB-95
010-0005-0000
1
Silicone Bend Relief Cap
408-8523
RF-ASMB-90
—
Cable Inner Conductor,
.031 [0.78] Max.
408-8525
RF-ASMB-95
010-0005-0000
1
408-8525
RF-ASMB-95
010-0044-0000
Hex Nut
408-8525
RF-ASMB-95
010-0005-0000
Hex Nut w/ Safety Wire Holes,
.015 [0.38] Wire Max.
408-8525
RF-ASMB-95
010-0005-0000
1, 2
1, 2
1
1
1
2
Solderless Assembly
1
1
1
Pin protected.
Hole in ferrule permits soldering to clamp ring and shield for increased cable pullout strength.
1
2
2-105
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Standard Connectors — Screw-On Series (Continued)
Right-Angle Plugs
B
S-50, 70 & 93
C
ANGLE PLUG
A
Part No.
Dim.
A
Dim.
B
S-50 Series (50 Ohm) .190 [4.83] -32 UNF-2B Thread
.225
.735
032-0015-0001
5.72 Dia.
18.67
052-0204-0001
052-0215-0001
.735
18.67
.735
18.67
.250
6.35 Hex.
.250
6.35 Hex.
.745
.225 Dia.
18.92
5.72
S-70 Series (70 Ohm) .216 [5.49] -32 UNEF-2B Thread
.745
.255 Dia.
032-0013-0001
18.92
6.48
052-0337-0001
052-0299-0001
.745
18.92
.281
7.14 Hex.
.745
.281 Hex.
18.92
7.14
S-93 Series (93 Ohm) .250 [6.35] -32 UNEF-2B Thread
.745
.320 Dia.
032-0014-0001
18.92
8.13
.745
.320 Dia.
032-0068-0001
18.92
8.13
.745
.312 Hex.
032-0153-0001
18.92
7.92
.745
.312
052-0207-0001
Hex.
18.92
7.92
052-0379-0001
Dim.
C
Cable
Jacket
Max.
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
Assembly
Tool
.570
14.48
.570
14.48
.092
2.34
.092
2.34
408-8520
RF-ASMB-87
010-0016-0000
Hex Nut
408-8520
RF-ASMB-87
010-0016-0000
.092
2.34
Hex Nut w/ Safety
Wire Holes,
.021 [.533] Wire Max.
.570
14.48
408-8520
RF-ASMB-87
010-0016-0000
.570
14.48
.111
2.82
Dual Shield Cable
408-8520
RF-ASMB-87
010-0016-0000
.570
14.48
.111
2.82
Special Features
408-8520
RF-ASMB-87
010-0016-0000
408-8520
RF-ASMB-87
010-0016-0000
408-8520
RF-ASMB-87
010-0016-0000
408-8520
RF-ASMB-87
010-0017-0000
408-8520
RF-ASMB-87
010-0017-0000
Hex Nut
408-8520
RF-ASMB-87
010-0017-0000
Hex Nut
408-8520
RF-ASMB-87
010-0017-0000
408-8520
RF-ASMB-87
010-0017-0000
408-8520
RF-ASMB-87
010-0017-0000
.570
14.48
.111
2.82
Hex Nut w/ Safety
Wire Holes,
.014 [.355] Wire Max.
.570
14.48
.111
2.82
Hex Nut
.630
16.00
.630
16.00
.630
16.00
.630
16.00
.134
3.40
.155
3.94
.155
3.94
.134
3.40
052-0298-0001
.745
18.92
.312
7.92 Hex.
.630
16.00
.134
3.40
052-0304-0022
.745
18.92
.312
7.92 Hex.
.630
16.00
.155
3.94
Hex Nut w/ Safety
Wire Holes,
.015 [.381] Wire Max.
Hex Nut w/ Safety
Wire Holes,
.015 [.381] Wire Max.,
Silicone Bend
Relief Cap
2-106
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Standard Connectors — Screw-On Series (Continued)
Jacks
S-50, 70 & 93
.400
[10.16]
B Max. Panel
A
.375
Hex.
[9.52]
ØB
.375
Hex.
[9.52]
Part No.
Fig.
Dim.
A
S-50 Series (50 Ohm) .190 [4.83] -32 UNF-2A Thread
.870
2
031-0033-0001
22.10
.750
1
031-0034-0001
19.05
.720
051-0467-0001
1
18.30
S-70 Series (70 Ohm) .216 [5.49] -32 UNEF-2A Thread
.760
031-0036-0001
1
19.30
.880
031-0048-0001
2
22.35
.760
031-0090-0001
1
19.30
S-93 Series (93 Ohm) .250 [6.35] -32 UNEF-2A Thread
.880
031-0032-0001
2
22.35
.760
031-0037-0001
1
19.30
1.000
031-0088-0001
1
25.40
.750
031-0089-0001
2
19.05
Ø .313 Min.
[7.95]
Lock Washer
Fig. 1
Fig. 2
Dim.
B
Cable
Jacket
Max.
.140
3.56
.235
5.97
.235
5.97
.088
2.24
.087
2.21
.079
2.01
.255
6.48
.140
3.56
.255
6.48
.093
2.36
.093
2.36
.109
2.77
.155
3.94
.320
8.13
.320
8.13
.140
3.56
.134
3.40
.134
3.40
.154
3.91
.154
3.91
Special Features
Hex Collet Cable Clamp
No Mounting Flat,
Hex Nut Cable Clamp
RF Connectors
Mounting Nut
2
.292 Min.
[7.42]
Mounting Hole
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
Assembly
Tool
408-8522
RF-ASMB-89
010-0003-0000
408-8522
RF-ASMB-89
010-0003-0000
408-8522
RF-ASMB-89
010-0003-0000
408-8522
RF-ASMB-89
010-0004-0000
408-8525
RF-ASMB-95
010-0004-0000
408-8522
RF-ASMB-89
010-0035-0000
408-8525
RF-ASMB-95
010-0005-0000
408-8525
RF-ASMB-95
010-0005-0000
408-8533
RF-ASMB-106
—
408-8524
RF-ASMB-92
—
2-107
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Standard Connectors — Screw-On Series (Continued)
Receptacles
A
A
B Max.
Panel
B Max.
Panel
E Ø Min.
C
C
D Hex.
D Hex.
F Min.
Solder Pot
Turret
Mounting
Nut
Solder Lug
Solder Lug
Mounting Nut
Fig. 1
Fig. 2
A
A
B
.245
[6.22]
B
C
Mounting Hole
for Fig. 1 & 2
.100 ± .005
[2.54 ± .127]
Typ.
D
.200 ± .005
[5.08 ± .127]
Typ.
C
Ø .055 Min.
[1.40] Typ.
Ø .037
Typ.
[.940]
Ø .037
Typ.
[.940]
Fig. 3
Dim.
Dim.
A
B
S-50 Series (50 Ohm) .190 [4.83] -32 UNF-2A Thread
.515
.080
031-0001-0001
2
13.08
2.03
.510
.110
031-0001-0003
2
12.95
2.80
.515
.150
031-0002-0001
2
13.08
3.81
.255
031-0003-0001
2
—
6.48
.555
.120
031-0024-0001
2
14.10
3.05
.605
.160
031-0050-0001
1
15.37
4.06
.340
.155
031-0059-0001
3
8.64
3.93
.425
.155
031-0061-0001
4
10.80
3.93
.345
.250
031-0062-0001
3
8.76
6.35
.315
.125
051-0125-0001
2
8.00
3.18
.605
.160
051-0318-0001
1
15.37
4.06
.340
.050
051-0450-0001
3
8.64
1.27
.425
.155
051-0459-0001
4
10.80
3.93
S-70 Series (70 Ohm) .216 [5.49] -32 UNEF-2A Thread
.555
.100
031-0017-0001
2
14.10
2.54
.555
.160
031-0018-0001
2
14.10
4.06
.605
.160
031-0051-0001
1
15.37
4.06
.340
.155
031-0069-0001
3
8.64
3.94
.425
.155
031-0072-0001
4
10.80
3.94
Part No.
Fig.
Fig. 4
Mounting Pattern
for Fig. 3 & 4
Dim.
C
Dim.
D
Dim.
E
Dim.
F
.187
4.75 Wrench Flats
.187
4.75 Wrench Flats
.187
4.75 Wrench Flats
.187
4.75 Wrench Flats
.344
8.74 Wrench Flats
.250
6.35 Hex.
.330
8.38 Dia.
.330
8.38 Dia.
.250
6.35
.250
6.35
.250
6.35
—
No Mounting Flat
—
No Mounting Flat
—
No Mounting Flat
—
No Nut or Solder Lug, Threads into Panel
.438
11.13
.250
4.75
.191
4.85
.191
4.85
.191
4.85
.190 -32
4.83
.345
8.76
.191
4.85
—
Housing Isolated by Nylon Insulator
.173
4.39
—
—
—
.480
12.20
—
—
—
—
—
—
.250
4.75
.138
3.50
.191
4.85
.173
4.39
.330
8.38 Dia.
.187 Wrench Flats
4.75
.250 Hex.
6.35
.330 Dia.
8.38
.330 Dia.
8.38
.250
6.35
.250
6.35
.250
6.35
.330
8.38
.330
8.38
—
—
Special Features
No Mounting Thread, Solder or Press into Panel
w/ Safety Wire Holes, .014 [.355] Wire Max.
—
—
—
.480
12.20
—
—
3 Outer Legs
.217
5.51
.217
5.51
.217
5.51
—
No Mounting Flat
—
No Mounting Flat
Hex.
.281
7.14
.281
7.14
.281
7.14
.197
5.00
Dia.
—
—
—
Dia.
.480
12.20
—
—
Hex.
Hex.
2-108
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Standard Connectors — Screw-On Series (Continued)
Receptacles (Continued)
Dim.
C
Dim.
D
Dim.
E
.312
7.92 Hex.
.312
7.92 Hex.
.345 Wrench Flats
8.76
.312
7.92 Hex.
.330
8.38 Dia.
.330 Dia.
8.38
.330
8.38 Dia.
.312
7.92
.312
7.92
.438
11.13
.312
7.92
.251
6.38
.251
6.38
.345
8.76
.251
6.38
.232
5.89
Catalog 1308940
Revised 9-14
Dimensions are in millimeters
unless otherwise specified.
Fig.
Dim.
F
Special Features
—
No Mounting Flat
—
No Mounting Flat
—
Housing Isolated by Nylon Insulator
—
—
—
.480
12.20
—
—
—
—
—
2
RF Connectors
Dim.
Dim.
A
B
S-93 Series (93 Ohm) .250 [6.35] -32 UNEF-2A Thread
.100
.555
2
031-0016-0001
2.54
14.10
.160
.555
2
031-0019-0001
2.54
14.10
.555
.120
031-0046-0001
2
3.05
3.05
.605
.160
031-0052-0001
1
15.37
2.54
.155
.340
3
031-0067-0001
3.94
8.64
.425
.155
031-0073-0001
4
10.80
3.94
.345
.250
031-0080-0001
3
8.76
6.35
Part No.
2-109
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Standard Connectors — Slide-On Series
All plugs shown below mate with all
jacks/receptacles shown below.
Jack
SOS-50 Ohm Series
031-0053-0001
SOS-70 Ohm Series
031-0095-0001
SOS-93 Ohm Series
031-0063-0001
031-0093-0001
Plug
SOS-50 Ohm Series
032-0055-0001
SOS-70 Ohm Series
032-0060-0001
032-0087-0001
SOS-93 Ohm Series
032-0077-0001
032-0084-0001
Bulkhead Jack
SOS-50 Ohm Series
031-0054-0001
SOS-70 Ohm Series
SOS-93 Ohm Series
031-0064-0001
031-0094-0001
SOS-70 Ohm Series
031-0049-0001
051-0258-0001
051-0325-0001
SOS-93 Ohm Series
031-0049-0001
051-0258-0001
051-0325-0001
Right-Angle Plug
SOS-50 Ohm Series
032-0063-0001
SOS-70 Ohm Series
032-0062-0001
SOS-93 Ohm Series
032-0059-0001
032-0083-0001
Receptacle
SOS-50 Ohm Series
031-0049-0001
051-0258-0001
051-0325-0001
Plug Receptacle
SOS-50 Ohm Series
032-0042-0001
052-0061-0001
052-0471-0001
SOS-70 Ohm Series
032-0042-0001
052-0061-0001
052-0471-0001
SOS-93 Ohm Series
032-0042-0001
052-0061-0001
052-0471-0001
Right-Angle Printed Circuit Receptacle
SOS-50 Ohm Series
031-0070-0001
Bulkhead Plug
SOS-50 Ohm Series
032-0056-0001
SOS-70 Ohm Series
031-0070-0001
SOS-93 Ohm Series
031-0070-0001
Printed Circuit Receptacle
SOS-70 Ohm Series
032-0061-0001
SOS-93 Ohm Series
032-0058-0001
SOS-50 Ohm Series
031-0060-0001
031-0065-0001
SOS-70 Ohm Series
031-0060-0001
031-0065-0001
SOS-93 Ohm Series
031-0060-0001
031-0065-0001
2-110
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Standard Connectors — Slide-On Series (Continued)
Straight Plugs
A
C Max.
Panel
.290
[7.37]
A
D Hex.
B Hex.
ØB
Contact
Tail
Mounting Nut
Solder Lug
2
RF Connectors
Fig. 1
Fig. 2
Plug Receptacle
A
.500
[12.70]
C Max. Panel
ØE
Min.
Hex.
B Hex.
Mounting Nut
Lock Washer
Fig. 3
Bulkhead Plug
Part No.
Mounting Hole
for Fig. 2 & 3
Fig.
Dim.
A
Dim.
B
Dim.
C
Dim.
D
Dim.
E
Cable
Max.
Jacket
Special
Features
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
Assembly
Tool
2
.705
17.91
.870
22.10
.950
24.13
.750
19.05
.590
14.99
.250
6.35
.250
6.35
.375
9.53
.250
6.35
.250
6.35
.160
4.06
.281
7.14
.217
5.51
—
Turret Pin
Contact Tail
—
—
—
—
—
—
408-8526
RF-ASMB-97
010-0007-0000
.145
3.68
.160
4.06
.095
2.41
.375
9.53
.281
7.14
.281
7.14
.313
7.95
.217
5.51
.217
5.51
.088
2.24
.088
2.24
.705
17.91
.880
22.35
.960
24.38
.880
22.35
.750
19.05
.590
14.99
.250
6.35
.250
6.35
.375
9.53
.250
6.35
.250
6.35
.250
6.35
.160
4.06
.281
7.14
.217
5.51
—
—
—
—
.145
3.68
.375
9.53
.313
7.95
.093
2.36
.093
2.36
.108
2.24
.705
17.91
.960
24.38
.880
22.35
1.06
26.92
.750
19.05
.590
14.99
.250
6.35
.375
9.53
.250
6.35
.250
6.35
.250
6.35
.250
6.35
SOS-50 Series (50 Ohm)
032-0042-0001
032-0055-0001
032-0056-0001
1
3
052-0061-0001
2
052-0471-0001
2
—
—
408-8526
RF-ASMB-97
010-0007-0000
Solder Pot
Contact Tail
Straight Pin
Contact Tail1
—
—
—
—
—
—
Turret Pin
Contact Tail
—
—
—
408-8529
RF-ASMB-102
010-0007-0000
408-8526
RF-ASMB-97
010-0007-0000
408-8526
RF-ASMB-97
010-0036-0000
SOS-70 Series (70 Ohm)
032-0042-0001
2
032-0060-0001
1
032-0061-0001
3
032-0087-0001
1
052-0061-0001
2
052-0471-0001
2
—
—
—
.160
4.06
.095
2.41
.281
7.14
.281
7.14
.217
5.51
.217
5.51
.160
4.06
.145
3.68
.281
7.14
.375
9.53
.217
5.51
.313
7.95
—
—
—
—
—
—
—
Solder Pot
Contact Tail
Straight Pin
Contact Tail1
—
—
—
—
Turret Pin
Contact Tail
—
—
—
408-8529
RF-ASMB-102
010-1008-0000
408-8529
RF-ASMB-102
010-1008-0000
408-8523
RF-ASMB-90
—
—
—
—
—
—
—
—
SOS-93 Series (93 Ohm)
032-0042-0001
2
032-0058-0001
3
032-0077-0001
1
032-0084-0001
1
052-0061-0001
2
052-0471-0001
2
—
—
—
.160
4.06
.095
2.41
.281
7.14
.281
7.14
.217
5.51
.217
5.51
.134
3.40
.134
3.40
.154
3.91
—
—
Solder Pot
Contact Tail
Straight Pin
Contact Tail1
Lockwasher supplied in place of solder lug.
1
2-111
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Standard Connectors — Slide-On Series (Continued)
Jacks
A
.520
[13.21]
A
.375
Hex.
[9.53]
Ø .250
[6.35]
Lock Washer
Mounting Nut
Fig. 1
Fig.
Dim.
A
Cable
Jacket
Max.
031-0053-0001
1
031-0054-0001
2
.800
20.32
.970
24.64
.088
2.24
.088
2.24
1
.810
20.57
.108
2.74
031-0063-0001
1
031-0064-0001
2
031-0093-0001
1
031-0094-0001
2
.810
20.57
.980
24.89
1.100
27.94
.750
19.05
.134
3.40
.134
3.40
.154
3.91
.154
3.91
Part No.
Ø .313
[7.95]
Min.
.375
Hex.
[9.53]
Fig. 2
Mounting Hole
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
Assembly
Tool
408-8531
RF-ASMB-104
010-0007-0000
408-8531
RF-ASMB-104
010-0007-0000
408-8531
RF-ASMB-104
010-0036-0000
408-8530
RF-ASMB-103
010-1008-0000
408-8530
RF-ASMB-103
010-1008-0000
.305 [7.75] Dia. Over B.R. Cap
408-8532
RF-ASMB-105
—
Hex Nut Cable Clamp
408-8524
RF-ASMB-92
—
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
Assembly
Tool
Special Features
SOS-50 Series (50 Ohm)
SOS-70 Series (70 Ohm)
031-0095-0001
SOS-93 Series (93 Ohm)
Right-Angle Plugs
A
B
Ø .250
[6.35]
Part No.
Dim.
A
Dim.
B
Cable
Max.
O.D.
.735
18.67
.545
13.84
.092
2.34
408-8520
RF-ASMB-87
010-0016-0000
.745
18.92
.545
13.84
.111
2.82
408-8520
RF-ASMB-87
010-0016-0000
.745
18.92
.745
18.92
.605
15.37
.605
15.37
.134
3.40
.155
3.94
408-8520
RF-ASMB-87
010-0017-0000
408-8520
RF-ASMB-87
010-0017-0000
Special Features
SOS-50 Series (50 Ohm)
032-0063-0001
SOS-70 Series (70 Ohm)
032-0062-0001
SOS-93 Series (93 Ohm)
032-0059-0001
032-0083-0001
2-112
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Standard Connectors — Slide-On Series (Continued)
Receptacles
A
A
B Max.
Panel
B Max.
Panel
ØE
Min.
D Hex.
D Hex.
Mounting
Nut
Solder Lug
Fig. 2
A
Mounting Hole
for Fig. 1 & 2
.245
[6.22]
.100 ± .005
[2.54 ± 0.13] Typ.
B
D
Ø .037 Typ.
[.940]
Ø .037 Typ.
[.940]
Fig. 3
Dim.
Dim.
A
B
SOS-50 (50 Ohm), SOS-70 (70 Ohm), & SOS-93 (93 Ohm) Series
.715
.160
031-0049-0001
1
18.16
4.06
.340
.155
031-0060-0001
3
8.64
3.94
.340
.250
031-0065-0001
3
8.64
6.35
.425
.155
031-0070-0001
4
10.79
3.94
.715
.160
051-0258-0001
2
18.16
4.06
.570
.140
051-0325-0001
1
14.48
3.56
Part No.
Fig.
.200 ± .005
[5.08 ± 0.13]
Typ.
Ø .055 Min.
[1.40] Typ.
C
C
RF Connectors
Fig. 1
A
2
Solder Pot
Turret
Mounting
Nut
Solder Lug
Fig. 4
Dim.
C
.250
6.35
.330
8.38
.330
8.38
.330
8.38
.250
6.35
.250
6.35
Dim.
D
Dim.
E
Hex.
.281
7.14
.217
5.51
Dia.
—
—
Dia.
—
—
Hex.
.540
13.72
.281
7.14
Hex.
—
Dia.
Mounting Pattern
for Fig. 3 & 4
Special Features
—
.217
5.51
.216-32
5.49 Thd.
No Nut or Lockwasher, Threads into Panel
2-113
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Standard Connectors — Quick-Connect Series
Jack
Plug
QC-50 Ohm Series
032-0002-0001
032-0030-0001
QC-70 Ohm Series
032-0016-0001
032-0031-0001
032-0079-0001
QC-50 Ohm Series
031-0038-0001
QC-93 Ohm Series
032-0012-0001
032-0032-0001
032-0072-0001
QC-70 Ohm Series
QC-93 Ohm Series
031-0040-0001
QC-70 Ohm Series
031-0057-0001
QC-93 Ohm Series
031-0058-0001
031-0085-0001
QC-70 Ohm Series
031-0004-0001
031-0005-0001
031-0006-0001
051-0586-0001
QC-93 Ohm Series
031-0020-0001
031-0021-0001
Receptacle
QC-50 Ohm Series
031-0057-0001
Right-Angle Plug
QC-50 Ohm Series
032-0026-0001
QC-70 Ohm Series
032-0027-0001
QC-93 Ohm Series
032-0020-0001
052-0228-0001
Receptacle
QC-50 Ohm Series
031-0004-0001
031-0005-0001
031-0006-0001
051-0586-0001
2-114
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Standard Connectors — Quick-Connect Series (Continued)
Straight Plugs
A
B
2
Dim.
A
Dim.
B
.820
20.83
.820
20.83
.250
6.35
.250
6.35
.093
2.36
.093
2.36
.830
21.08
.830
21.08
.840
21.34
.250
6.35
.250
6.35
.250
6.35
.093
2.36
.093
2.36
.108
2.74
.845
21.46
.845
21.46
1.050
26.67
.312
7.92
.312
7.92
.312
7.92
.134
3.40
.134
3.40
.154
3.91
Special Features
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
Assembly
Tool
408-8527
RF-ASMB-100
010-0007-0000
408-8526
RF-ASMB-97
010-0007-0000
408-8527
RF-ASMB-100
010-0007-0000
408-8529
RF-ASMB-102
010-0007-0000
408-8526
RF-ASMB-97
010-0036-0000
408-8527
RF-ASMB-100
010-0008-0000
408-8529
RF-ASMB-102
010-0008-0000
408-8523
RF-ASMB-90
—
RF Connectors
Part No.
Cable
Jacket
Max.
QC-50 Series (50 Ohm)
032-0002-0001
032-0030-0001
Solderless Assembly
QC-70 Series (70 Ohm)
032-0016-0001
032-0031-0001
032-0079-0001
Solderless Assembly
QC-93 Series (93 Ohm)
032-0012-0001
032-0032-0001
032-0072-0001
Solderless Assembly
Mates with 031-0085-0001 Only
Right-Angle Plugs
A
C
ØB
Part No.
Dim.
A
Dim.
B
Dim.
C
Cable
Jacket
Max.
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
Assembly
Tool
.735
18.67
.250
6.35
.605
15.37
.092
2.34
408-8520
RF-ASMB-87
010-0016-0000
.745
18.92
.250
6.35
.605
15.37
.111
2.82
408-8520
RF-ASMB-87
010-0016-0000
.745
18.92
.745
18.92
.312
7.92
.312
7.92
.635
16.13
.720
18.29
.134
3.40
.155
3.94
408-8520
RF-ASMB-87
010-0017-0000
408-8520
RF-ASMB-87
010-0017-0000
Special Features
QC-50 Series (50 Ohm)
032-0026-0001
QC-70 Series (70 Ohm)
032-0027-0001
QC-93 Series (93 Ohm)
032-0020-0001
052-0228-0001
Mates with
031-0085-0001 Only
2-115
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Standard Connectors — Quick-Connect Series (Continued)
Jacks
A
B
Part No.
Dim.
A
Dim.
B
Cable
Jacket
Max.
.750
19.05
.250
6.35
.760
19.30
.320
8.13
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
Assembly
Tool
.093
2.36
408-8531
RF-ASMB-104
010-0007-0000
.134
3.40
408-8530
RF-ASMB-103
010-1009-0000
Special Features
QC-50 Series (50 Ohm)
031-0038-0001
QC-93 Series (93 Ohm)
031-0040-0001
Receptacles
A
A
B
Max. Panel
B
Max. Panel
F Min.
C Hex.
D Hex.
C Hex.
D Hex.
Mounting
Nut
Solder Lug
Solder Lug
Fig. 1
Dim.
A
QC-50 Series (50 Ohm) & QC-70 Series (70 Ohm)
.555
031-0004-0001
2
14.10
.555
031-0005-0001
2
14.10
.250
031-0006-0001
2
6.35
.605
031-0057-0001
1
15.37
.555
051-0586-0001
2
14.10
QC-93 Series (93 Ohm)
.555
031-0020-0001
2
14.10
.555
031-0021-0001
2
14.10
.605
031-0058-0001
1
15.37
.715
031-0085-0001
1
18.16
Part No.
Fig.
EØ
Min.
Solder
Pot
Mounting
Nut
Turret
Fig. 2
Mounting Hole
Dim.
B
Dim.
C
Dim.
D
Dim.
E
Dim.
F
.095
2.41
.165
4.19
.250
6.35
.250
6.35
No Mounting Flat
—
No Mounting Flat
—
No Nut or Solder Lug, Threads into Panel
.250
6.35
.250
6.35
.191
4.85
.191
4.85
.190-32 Thd
4.83
.191
4.85
.191
4.85
—
.165
4.19
.165
4.19
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.095
2.41
.165
4.19
.160
4.06
.165
4.19
.312
7.92
.312
7.92
.312
7.92
.312
7.92
.312
7.92
.312
7.92
.312
7.92
.312
7.92
.251
6.38
.251
6.38
.251
6.38
.251
6.38
—
—
Special Features
.173
4.39
—
No Mounting Flat, Split Solder Lug
—
No Mounting Flat
—
No Mounting Flat
.232
5.89
—
No Mounting Flat, Mates with
032-0072-0001 & 052-0228-0001 Only
2-116
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Standard Connectors — Twinax Series
Twinax Plugs:
For cables with two inner
conductors and one shield
A
A
B
B
Fig. 1
Slide-On Series
Fig.
Dim.
A
Dim.
B
032-0088-0001
1
032-0093-0001
1
052-0229-0001
2
052-0324-0001
2
1.085
27.56
1.085
27.56
1.085
27.56
1.095
27.81
.312
7.92
.312
7.92
.440
11.18
.440
11.18
Twinax Receptacles and
Jacks:
Cable
Jacket
Max.
.167
4.24
.123
3.12
.123
3.12
.167
4.24
Special Features
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
Assembly
Tool
408-8528
RF-ASMB-101
010-0031-0000
408-8528
RF-ASMB-101
010-0031-0000
408-8517
RF-ASMB-61
010-0172-0000
408-8517
RF-ASMB-61
010-0172-0000
RF Connectors
Part No.
2
Fig. 2
Screw-On Series
A
A
B Max.
Panel
B Max. Panel
C Hex.
D Hex.
C Hex.
Solder
Pot
Mounting Nut
Lockwasher Washer
D Hex.
Solder Pot
Lockwasher
Mounting Nut
Fig. 1
Slide-On Series
Fig. 2
Slide-On Series or Screw-On Series
A
B Max.
Panel
F Min.
D Hex.
C Hex.
E Ø Min.
Mounting Nut
Lockwasher
Fig. 3
Slide-On Series or Screw-On Series
Mounting Hole
Part No.
Fig.
Dim.
A
Dim.
B
Dim.
C
Dim.
D
Dim.
E
Dim.
F
Cable
Max.
Jacket
031-0098-0001
1
2
.155
3.94
.155
3.94
.0751
1.91
.2552
6.48
.375
9.53
.437
11.10
.437
11.10
.437
11.10
.375
9.53
.375
9.53
.500
12.7
.500
12.7
.313
7.95
.313
7.95
.376
9.55
.376
9.55
.292
7.42
.292
7.42
.351
8.92
.351
8.92
—
051-0248-0001
.812
20.62
.960
24.38
1.060
26.92
1.255
31.88
051-0358-0001
3
051-0389-0001
3
Special
Features
—
.167
4.24
.167
4.24
Lockwasher
not included
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
Assembly
Tool
—
—
—
—
—
—
408-8516
RF-ASMB-44
010-0186-0000
408-8516
RF-ASMB-44
010-0186-0000
.075 [1.91] Max. Panel when mated with a Screw-On plug, .180 [4.57] Max. Panel when mated with a Slide-On plug.
.255 [6.48] Max. Panel when mated with a Screw-On plug, .360 [9.14] Max. Panel when mated with a Slide-On plug.
1
2
2-117
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Standard Connectors — Triax Series and Terminals
Triax Plugs:
A
For cables with one inner
conductor and two isolated
shields
Part No.
052-0130-0001
052-0138-0001
052-0593-0001
B
Dim.
A
Dim.
B
1.37
34.80
1.37
34.80
1.37
34.80
.440
11.18 Dia.
.440
11.18 Dia.
.438
11.13 Hex.
Cable
Jacket
Max.
.124
3.15
.183
4.65
.214
5.44
Triax Receptacle:
Special Features
Hex Nut w/ Safety Wire Holes,
.027 [.686] Wire Max.
Former
MICRODOT
I.S. No.
Assembly
Tool
408-8514
RF-ASMB-20
—
408-8515
RF-ASMB-21
—
408-8518
RF-ASMB-73
—
Triax Adapter:
1.11
[28.19]
.160 Max.
[4.06] Panel
.160 Max.
[4.06] Panel
Ø .438
Min.
[11.13]
1.09
[27.69]
Ø .501 Min.
[12.73]
0.56 Hex.
[14.22]
0.56 Hex.
[14.22] Nut
0.50
Hex.
[12.70]
Lockwasher
Instruction
Sheet No.
Mounting Nut
0.62
Hex.
[15.75]
Lockwasher
Part Number 051-0618-0001
Mounting Hole
D
Fig. 1
Fig. 2
Terminals are gold plated.
See applicable MICRODOT
drawing for solder and crimp
instructions.
Mounting Hole
Part No.
Fig.
Dim.
A
Dim.
B
Dim.
C
Dim.
D
053-0354-0003
1
053-0249-0001
1
053-0495-0001
1
053-0656-0001
1
053-0294-0002
1
033-0115-0002
2
033-0116-0001
2
033-0117-0001
2
053-0154-0001
1
053-0250-0001
1
053-0020-0003
1
053-0021-0003
1
053-0267-0003
1
053-0265-0001
2
053-0230-0001
2
053-0155-0001
1
053-0022-0003
1
053-0388-0001
2
053-0251-0001
2
.030
.762
.030
.762
.030
.762
.030
.762
.030
.762
.040
1.02
.040
1.02
.040
1.02
.041
1.04
.041
1.04
.041
1.04
.041
1.04
.041
1.04
.041
1.04
.041
1.04
.041
1.04
.041
1.04
.042
1.07
.042
1.07
.080
2.03
.105
2.67
.125
3.18
.145
3.68
.145
3.68
.063
1.60
.094
2.39
.140
3.56
.080
2.03
.080
2.03
.080
2.03
.105
2.67
.105
2.67
.128
3.25
.128
3.25
.145
3.68
.145
3.68
.098
2.49
.098
2.49
.630
16.00
.630
16.00
.880
22.35
.880
22.35
.880
22.35
.255
6.48
.300
7.62
.350
8.89
.430
10.92
.505
12.83
.630
16.00
.630
16.00
.875
22.23
.505
12.83
.630
16.00
.430
10.82
.630
16.00
.500
12.70
.630
16.00
.375
9.53
.375
9.53
.610
15.49
.375
9.53
.625
15.88
.100
2.54
.100
2.54
.200
5.08
.175
4.45
.250
6.35
.375
9.53
.375
9.53
.625
15.88
.250
6.35
.375
9.53
.175
4.45
.375
9.53
.250
6.35
.375
9.53
ØA
C
Mounting Nut
Part Number 053-0161-0001
Mates with Triax Plug, Both Ends
Terminals
ØB
.468
Min.
[11.89]
Cable
Max.
Dielectric
.050
1.27
.071
1.80
.083
2.11
.108
2.74
.108
2.74
.042
1.07
.068
1.73
.108
2.74
.050
1.27
.050
1.27
.050
1.27
.071
1.80
.071
1.80
.102
2.59
.102
2.59
.108
2.74
.108
2.74
.065
1.65
.065
1.65
Cable Max.
Inner
Conductor
.015
.381
.021
.533
.022
.559
.023
.584
.023
.584
.023
.584
.023
.584
.023
.584
.019
.483
.019
.483
.015
.381
.023
.584
.023
.584
.021
.533
.018
.457
.023
.584
.023
.584
.021
.533
.021
.533
2-118
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Standard Connectors — Module Blocks
D
E
C
.242
[6.15]
A
B
desired. (Ex: illustration
shows 033-0042—A2—
B7—C6—D5—E1) Ordering
part number will be converted to a MICRODOT
assigned number at time
of ordering.
Size
Part No.
50 Ohm
033-0042*
70 Ohm
033-0043*
93 Ohm
033-0044*
Dim. H
.250
6.35
.250
6.35
.300
7.62
*Part number to be completed by
customer. A Computer Part Number
will be assigned by TE Connectivity.
We do not stock complete
assemblies.
2
RF Connectors
The five faces of basic
block can be used to mount
any one of 10 different terminations. The 5 faces are
coded with letters as shown
above. The 10 terminations
are coded with Nos. 1–10.
Part number, to be complete, must show face location and termination Nos.
.375
[9.53]
Interfaces/Terminations
Termination
Number
Mating
Type
1
2
3
4
5
6
S
S
QC
QC
SOS
SOS
Description
Receptacle
Plug with
Knurl Nut
Receptacle
Plug
Receptacle
Plug
.320
[8.13]
.125
[3.18]
.345
[8.76]
.125
[3.18]
Ø
50 Series
70 Series
93 Series
Thread
.190-32 UNF
4.83
.216-32 UNEF
5.49
.250-32 UNEF
6.35
Thread
.190-32 UNF
4.83
.216-32 UNEF
5.49
.250-32 UNEF
6.35
.290
[7.37]
.255
[6.48]
Ø
Dia.
.230
5.84
.255
6.48
.320
8.13
Ø
Dia.
.250
6.35
.250
6.35
.312
7.92
Dia.
.250
6.35
.250
6.35
.250
6.35
Interfaces/Terminations (Continued)
Termination
Number
Mating
Type
7
8
9
10
—
—
S
S
Description
Bulkhead Stud
Bulkhead
Receptacle
Plug with
Hex. Nut
Plug, Hex. Nut
With Wire Holes
.350
[8.89]
.160 Max.
[4.06] Panel
.420
[10.67]
.160 Max.
[4.06] Panel
Ø .191
Min.
[4.85]
.250
Hex.
[6.35]
Turret
Height
Min.
Ø .030
[.762]
3 Plcs.
Mounting Nut
Solder Lug
Solder Lug
93 Series
Hex.
Hex.
Mounting Nut
70 Series
Ø Min.
Hex.
.173
Min.
[4.39]
50 Series
.320
[8.13]
.320
[8.13]
Thread
Thread
Hex.
.190-32 UNF
4.83
.190-32 UNF
4.83
.190-32 UNF
4.83
.190-32 UNF
4.83
.216-32 UNEF
5.49
.250-32 UNEF
6.35
.250
6.35
.281
7.14
.312
7.92
Min. Hole
Dia.
.191
4.85
.217
5.51
.251
6.38
Min. Hole
Height
.173
4.39
.197
5.00
.232
5.89
Thread
Hex.
Thread
Hex.
.190-32 UNF
4.83
.216-32 UNEF
5.49
.250-32 UNEF
6.35
.250
6.35
.281
7.14
.312
7.92
.190-32 UNF
4.83
.216-32 UNEF
5.49
.250-32 UNEF
6.35
.250
6.35
.281
7.14
.312
7.92
2-119
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Standard Connectors — Caps, Hoods
Caps, Screw-On Series
0.20
[5.08]
For Receptacles and Jacks
Part No.
S-50 Series
0.13
[3.30]
ØA
Fig.
Dim. A
033-0046-0001
1
033-0056-0001
2
.235
5.97
.235
5.97
S-70 Series
Ø .094
[2.39]
033-0047-0001
1
033-0057-0001
2
Diamond Knurl
Fig. 1
With Grounding Pin
0.20
[5.08]
.255
6.48
.255
6.48
S-93 Series
0.12
[3.05]
033-0048-0001
1
033-0058-0001
2
.315
8.00
.315
8.00
Material — Brass per QQ-B-626
Finish — Silver plate per QQ-S-365,
.0002 [.005] min.
Note: All caps can be supplied with .094
[2.39] Dia. bead chain and end ring.
When ordering, specify chain length and
end ring hole size (.130 [3.30], .140
[3.56], .167 [4.24], or .193 [4.90] Dia.)
ØA
Ø .094
[2.39]
Diamond Knurl
Fig. 2
Without Grounding Pin
Receptacle Hoods
A
B
Hex.
Part No.
033-0067-0001
033-0068-0001
033-0069-0001
033-0084-0001
053-0147-0001
Dim.
A
.490
12.45
.490
12.45
.490
12.45
.490
12.45
.840
21.34
ØC
Dim.
B
.250
6.35
.250
6.35
.312
7.92
.250
6.35
.437
11.10
Dim.
C
.098
2.49
.114
2.90
.156
3.96
.156
3.96
.156
3.96
Thread
For Receptacle Series
.190-32 UNF
4.83
.216-32 UNEF
5.49
.250-32 UNEF
6.35
.216-32 UNEF
5.49
.375-32 UNEF
9.53
S-50, QC-50, QC-70
S-70, SOS-50, SOS-70, SOS-93
S-93, QC-93
S-70, SOS-50, SOS-70, SOS-93
Twinax/Triax Receptacle
Material — Brass per QQ-B-626
Finish — Silver plate per QQ-S-365, .0002 [.005] min.
2-120
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Standard Connectors — Adapters
Feed-Thru Adapters
for Screw-On Series
A
.160 Max.
[4.06] Panel
A
B “X”
Hex.
“Y”
Ø .313
Min.
[7.95]
B
“Y” Hex.
Nut
B “X”
Hex.
Mounting Nut
Lockwasher
Fig. 1
Fig. 2
Fig.
033-0001-0001
1
033-0053-0001
2
033-0023-0001
1
033-0054-0001
2
033-0036-0001
1
033-0055-0001
2
Dim.
B
.250
6.35
.375
9.53
.250
6.35
.375
9.53
.312
7.92
.375
9.53
Dim.
A
.300
7.62
.600
15.24
.400
10.16
.600
15.24
.410
10.41
.600
15.24
End “Y” Is
S-50 Receptacle
S-50 Receptacle
S-50 Receptacle
S-50 Receptacle
S-70 Receptacle
S-70 Receptacle
S-70 Receptacle
S-70 Receptacle
S-93 Receptacle
S-93 Receptacle
S-93 Receptacle
S-93 Receptacle
.469
Min.
[11.91]
Mounting Hole
End “A” Is:
Configuration
A
BNC Plug
A
A
BNC
Receptacle
BNC Bulkhead
Receptacle
End “X” Is
2
.501
[12.73]
Min.
For mating BNC/TNC
connectors to MICRODOT
standard connectors.
BNC
Receptacle
Mounting Hole
RF Connectors
Part No.
BNC and TNC/MICRODOT
Adapters for Screw-On,
Slide-On, and QuickConnect Series
BNC Plug
.294
[7.47]
Min.
A
A
B
B
B
B
B
End “B” Is:
50 Series
Part No.
70 Series
Part No.
93 Series
Part No.
Screw-On (S)
Type Plug
033-0103-0001
033-0107-0001
033-0111-0001
Screw-On
Type
Receptacle
033-0101-0001
033-0105-0001
033-0109-0001
Screw-On (S)
Type Plug
033-0104-0001
053-0108-0001
033-0112-0001
Screw-On (S)
Type
Receptacle
033-0102-0001
033-0106-0001
033-0110-0001
Screw-On (S)
Type Plug
033-0127-00011
—
033-0129-00011
Mounting information: Housing Hex. .688 [17.48], Mtg. Nut Hex. .625 [15.88], Max. Panel .090 [2.29].
1
2-121
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Standard Connectors — Adapters (Continued)
BNC and TNC/MICRODOT
Adapters for Screw-On,
Slide-On, and QuickConnect Series (Continued)
.501
[12.73]
Min.
.469
Min.
[11.91]
Mounting Hole
End “A” Is:
BNC Bulkhead
Receptacle
Configuration
A
B
End “B” Is:
50 Series
Part No.
70 Series
Part No.
93 Series
Part No.
Screw-On (S)
Type
Receptacle
033-0090-00011
033-0125-00011
033-0126-00011
TNC Plug
A
B
Screw-On (S)
Type
Receptacle
033-0141-0001
033-0143-0001
033-0145-0001
TNC
Receptacle
A
B
Screw-On (S)
Type
Receptacle
033-0153-0001
—
—
BNC
Plug
A
B
Slide-On (SOS)
Type Plug
053-0339-0001
053-0339-0001
053-0339-0001
BNC
Plug
A
B
Slide-On (SOS)
Type
Receptacle
033-0081-0001
033-0081-0001
033-0081-0001
BNC
Receptacle
A
B
Slide-On (SOS)
Type Plug
033-0092-0001
033-0092-0001
033-0092-0001
BNC
Receptacle
A
B
Slide-On (SOS)
Type
Receptacle
033-0082-0001
033-0082-0001
033-0082-0001
BNC
Bulkhead
Receptacle
A
B
Slide-On (SOS)
Type
Receptacle
033-0124-00011
033-0124-00011
033-0124-00011
BNC
Plug
A
B
Quick-Connect
(QC) Type
Receptacle
033-0093-0001
033-0093-0001
033-0097-0001
BNC
Receptacle
A
B
Quick-Connect
(QC) Type
Receptacle
033-0094-0001
033-0094-0001
—
Mounting information: Housing Hex. .688 [17.48], Mtg. Nut Hex. .625 [15.88], Max. Panel .090 [2.29].
1
2-122
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Gold Plated Crimp Style Coaxial Connectors
Performance Data
Summary
For Gold Plated Crimp Style
Coaxial Connectors
Environmental
Materials
Captive Contacts — Terminated
connector contacts captivated from
movement in both directions.
Cable Retention —
50 Ohm connectors, 15 lb. min.
70 Ohm connectors, 25 lb. min.
93 Ohm connectors, 25 lb. min.
Recommended Coupling Torque
(Threaded Interface) —
8 inch/pounds max. [.904 Nm]
Recommended Receptacle
Mounting Torque (Threaded
Interface) — 8 inch/pounds max.
[.904 Nm]
Contact Protection (Unmated) —
Pin contact protected by coupling nut.
Socket protected by insulator and
housing.
Temperature Range (Continuous
Service) — -80°F to +392°F.
[-62°C to +200°C].
Vibration1,2 — MIL-STD-202, Method
204, Test condition B (15 G peak). No
physical damage or electrical discontinuities in excess of 1 microsecond.
Shock1,2 — MIL-STD-202, Method
213, Test Condition H. No physical
damage or electrical discontinuity after
shock.
Thermal Shock — MIL-STD-202,
Method 107, Test Condition C.
Moisture Resistance1 — MIL-STD202, Method 106.
Salt Spray1 — MIL-STD-202, Method
101, Test Condition B (48 hours).
Housing, Nut, Inner Sleeve —
Brass per ASTM-B-16, 35% Zinc.
Insulator — PTFE per
ASTM-D-1710.
Pin & Socket Contacts — Beryllium
Copper per ASTM-B-196.
Middle Sleeve — Copper Alloy.
Facial Seal, Sealing Sleeve &
Gasket — Silicone Rubber per
ZZ-R-765.
Lockwasher — #425 Bronze Alloy.
Electrical
Notes:
1
Screw-On Series threaded interface.
2
TE Connectivity recommends the
use of wired connectors in vibration
and shock environments. See individual specifications for connectors
with wire holes.
3
VSWR is a system specification.
Where performance is critical,
purchase TE cable assemblies (See
page 2-138) and specify VSWR
testing and mating connector part
numbers.
Assembly Methods
Straight Plugs & Jacks —
Cable Inner Conductor — Crimped
to contact.
Cable Shield — Crimped under
housing.
Right-Angle Plugs —
Cable Inner Conductor — Crimped
to contact.
Cable Shield — Crimped under
housing.
Impedance — Designed to be compatible with 50, 70, or 93 Ohm miniature
coaxial cable.
Dielectric Withstanding Voltage —
1000 volts RMS at sea level.
Contact Resistance — 4 milliohms
max., D.C.
Contact Capacity — 3 amps, D.C.
Insulation Resistance — 5 x 103
Megohms min. @ 500 volts D.C.
Voltage Standing Wave Ratio3
(VSWR) — Typical 50 Ohm series,
1.2 max. to 2 GHz.
2
RF Connectors
Mechanical
Plating
Contacts, Housing, Nut,
Inner Sleeve, Middle Sleeve,
Lockwasher — Gold per MIL-G-45204,
Type II, Grade C, Class 1.
2-123
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Gold Plated Crimp Style Coaxial Connectors — Screw-On Series
Straight Plugs
A
A
B
Hex.
ØB
Fig. 1
Partial Hex. Nut
Fig. 2
Knurl Nut
A
A
B
Hex.
B
Hex.
Fig. 3
Full Hex. Nut
Dim.
A
Dim.
B
Cable
Max.
.800
20.32
.800
2
132-0112-0002
20.32
.800
132-0112-0003
3
20.32
.800
132-0112-0004
4
20.32
.800
132-0113-0001
1
20.32
.800
132-0113-0002
2
20.32
.800
132-0113-0003
3
20.32
.800
132-0113-0004
4
20.32
.800
132-0114-0001
1
20.32
.800
132-0114-0002
2
20.32
.800
132-0114-0003
3
20.32
.800
132-0114-0004
4
20.32
.800
132-0115-0001
1
20.32
.800
132-0115-0002
2
20.32
.800
132-0115-0003
3
20.32
.800
132-0115-0004
4
20.32
.800
132-0509-0002
2
20.32
70 Ohm Series .216 [5.49] -32 UNEF-2B Thread
.800
132-0200-0001
1
20.32
.800
132-0200-0002
2
20.32
.800
132-0200-0003
3
20.32
.800
132-0200-0004
4
20.32
.800
132-0201-0001
1
20.32
.800
132-0201-0002
2
20.32
.800
132-0201-0003
3
20.32
.800
132-0201-0004
4
20.32
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.088
2.24
.088
2.24
.088
2.24
.088
2.24
.088
2.24
.088
2.24
.088
2.24
.088
2.24
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.116
2.95
.281
7.14
.290
7.37
.281
7.14
.281
7.14
.281
7.14
.290
7.37
.281
7.14
.281
7.14
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
Part No.
Fig.
Fig. 4
Hex. Nut w/ 3 Safety Wire Holes
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
408-8508
RF-ASMB-8
408-8508
RF-ASMB-8
408-8508
RF-ASMB-8
408-8508
RF-ASMB-8
With environmental seal
408-8508
RF-ASMB-8
With environmental seal
408-8508
RF-ASMB-8
With environmental seal
408-8508
RF-ASMB-8
With environmental seal
408-8508
RF-ASMB-8
408-8508
RF-ASMB-8
408-8508
RF-ASMB-8
408-8508
RF-ASMB-8
408-8508
RF-ASMB-8
With environmental seal
408-8508
RF-ASMB-8
With environmental seal
408-8508
RF-ASMB-8
With environmental seal
408-8508
RF-ASMB-8
With environmental seal
408-8508
RF-ASMB-8
Dual shield cable version
of RG 188 & 316
408-8508
RF-ASMB-8
408-8508
RF-ASMB-8
408-8508
RF-ASMB-8
408-8508
RF-ASMB-8
408-8508
RF-ASMB-8
With environmental seal
408-8508
RF-ASMB-8
With environmental seal
408-8508
RF-ASMB-8
With environmental seal
408-8508
RF-ASMB-8
With environmental seal
408-8508
RF-ASMB-8
Special Features
50 Ohm Series .190 [4.83] -32 UNF-2B Thread
132-0112-0001
1
2-124
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Gold Plated Crimp Style Coaxial Connectors — Screw-On Series (Continued)
Straight Plugs (Continued)
Part No.
Dim.
B
Cable
Max.
.795
20.19
.795
20.19
.795
20.19
.795
20.19
.795
20.19
.795
20.19
.795
20.19
.795
20.19
.312
7.92
.320
8.13
.312
7.92
.312
7.92
.312
7.92
.320
8.13
.312
7.92
.312
7.92
.155
3.94
.155
3.94
.155
3.94
.155
3.94
.155
3.94
.155
3.94
.155
3.94
.155
3.94
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
408-8508
RF-ASMB-8
408-8508
RF-ASMB-8
408-8508
RF-ASMB-8
408-8508
RF-ASMB-8
With environmental seal
408-8508
RF-ASMB-8
With environmental seal
408-8508
RF-ASMB-8
With environmental seal
408-8508
RF-ASMB-8
With environmental seal
408-8508
RF-ASMB-8
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
408-8509
RF-ASMB-11
408-8509
RF-ASMB-11
408-8509
RF-ASMB-11
408-8509
RF-ASMB-11
408-8509
RF-ASMB-11
408-8509
RF-ASMB-11
408-8509
RF-ASMB-11
408-8509
RF-ASMB-11
Special Features
93 Ohm Series .250 [6.35] -32 UNEF-2B Thread
132-0300-0001
1
132-0300-0002
2
132-0300-0003
3
132-0300-0004
4
132-0301-0001
1
132-0301-0002
2
132-0301-0003
3
132-0301-0004
4
2
RF Connectors
Dim.
A
Fig.
ØB
Right-Angle Plugs
C
A
Knurl Nut
Part No.
Dim.
A
Dim.
B
50 Ohm Series .190 [4.83] -32 UNF-2B Thread
.660
.250
132-0116-0002
16.76
6.35
.660
.250
132-0117-0002
16.76
6.35
.695
.250
132-0118-0002
17.65
6.35
.695
.250
132-0119-0002
17.65
6.35
70 Ohm Series .216 [5.49] -32 UNEF-2B Thread
.695
.290
132-0202-0002
17.65
7.37
.695
.290
132-0203-0002
17.65
7.37
93 Ohm Series .250 [6.35] -32 UNEF-2B Thread
.710
.320
132-0302-0002
18.03
8.13
.710
.320
132-0303-0002
18.03
8.13
Dim.
C
Cable
Jacket
Max.
.620
15.75
.620
15.75
.650
16.51
.650
16.51
.088
2.24
.088
2.24
.110
2.79
.110
2.79
.650
16.51
.650
16.51
.110
2.79
.110
2.79
.680
17.27
.680
17.27
.155
3.94
.155
3.94
Special Features
With environmental seal
With environmental seal
With environmental seal
With environmental seal
2-125
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Gold Plated Crimp Style Coaxial Connectors — Screw-On Series (Continued)
Jacks
B
B
Hex.
C Max.
Panel
.375 Hex.
[9.53] Nut
.375
Hex.
[9.53]
Mounting Nut
Fig. 1
Part No.
Fig.
Dim.
A
50 Ohm Series .190 [4.83] -32 UNF-2B Thread
.770
131-0134-0001
1
19.56
.770
131-0135-0001
2
19.56
.770
131-0136-0001
1
19.56
.770
2
131-0137-0001
19.56
.770
131-0150-0001
1
19.56
.770
131-0151-0001
2
19.56
70 Ohm Series .216 [5.49] -32 UNEF-2B Thread
.770
131-0200-0001
1
19.56
.770
131-0201-0001
2
19.56
93 Ohm Series .250 [6.35] -32 UNEF-2B Thread
.760
131-0300-0001
1
19.30
.760
131-0301-0001
2
19.30
Ø .313 Min.
[7.95]
A
Dim.
C
Cable
Jacket
Max.
.250
6.35
.360
9.14
.250
6.35
.360
9.14
.250
6.35
.360
9.14
—
.088
2.24
.088
2.24
.110
2.79
.110
2.79
.116
2.95
.116
2.95
.281
7.14
.360
9.14
.312
7.92
.350
8.89
Lockwasher
Fig. 2
Dim.
B
.105
2.67
—
.105
2.67
—
.105
2.67
—
.100
2.54
—
.095
2.41
.292
Min.
[7.42]
Special Features
Dual Shield Cable
Version of RG 188 & 316
Dual Shield Cable
Version of RG 188 & 316
.110
2.79
.110
2.79
.155
3.94
.155
3.94
Mounting Hole
Instruction
Sheet No.
Former
MICRODOT
I.S. No.
408-8508
RF-ASMB-8
408-8508
RF-ASMB-8
408-8508
RF-ASMB-8
408-8508
RF-ASMB-8
408-8508
RF-ASMB-8
408-8508
RF-ASMB-8
408-8508
RF-ASMB-8
408-8508
RF-ASMB-8
408-8508
RF-ASMB-8
408-8508
RF-ASMB-8
2-126
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Gold Plated Crimp Style Coaxial Connectors — Screw-On Series (Continued)
Receptacles
A
B Max.
Panel
A
B Max.
Panel
D
Hex.
C
Solder Lug
2
Mounting Nut
Mounting Hole
for Fig. 1 & 2
Fig. 2
A
B
.245
[6.22]
B
RF Connectors
Fig. 1
A
F
Min.
Solder
Pot
Turret
Mounting Nut
Solder Lug
Ø E Min.
D
Hex.
C
.200 ± .005
[5.08 ± 0.13]
Typ.
.100 ± .005
[2.54 ± 0.13]
C
Typ.
D
C
Ø .055 Min.
[1.40] Typ.
Ø .037 Typ.
[0.94]
Ø .037 Typ.
[0.94]
Fig. 3
Dim.
A
50 Ohm Series .190 [4.83] -32 UNF-2A Thread
.605
131-0138-0002
1
15.37
.515
131-0139-0002
2
13.08
.255
131-0140-0001
2
6.48
.340
131-0141-0002
3
8.64
.425
131-0142-0002
4
10.80
70 Ohm Series .216 [5.49] -32 UNEF-2A Thread
.605
131-0202-0002
1
15.37
.340
131-0705-0001
3
8.64
93 Ohm Series .250 [6.35] -32 UNEF-2A Thread
.340
131-0303-0002
3
8.64
.425
131-0304-0001
4
10.80
.605
131-0904-0001
1
15.37
Part No.
Fig.
Gold Plated Crimp Style
Coaxial Connectors
Assembly Tools
Dim.
B
Dim.
C
Dim.
D
Dim.
E
Dim.
F
.160
4.06
.150
3.81
.250
6.35
.250
6.35
.191
4.85
.191
4.85
.173
4.39
—
No Mounting Flat
—
.190 -32 Thd.
4.83
—
No Nut or Solder Lug, Threads into Panel
.155
3.94
.155
3.94
.250 Hex.
6.35
.187
4.75 Wrench Flats
.187
4.75 Wrench Flats
.330
8.38 Dia.
.330
8.38 Dia.
.160
4.06
.155
3.94
.250
6.35 Hex.
.330
8.38 Dia.
.155
3.94
.155
3.94
.160
4.06
.330
8.38 Dia.
.330
8.38 Dia.
.312
7.92 Hex.
—
—
—
—
.480
12.19
—
—
.281
7.14
.217
5.51
.197
5.00
—
—
—
—
—
—
.480
12.19
.312
7.92
—
—
.251
6.38
.232
5.89
Table 1. Contact Crimp Tools
MICRODOT Part No.
010-0065-0000
Special Features
Table 2. Housing Crimp Tools
Manufacturers Part No.
Astro Tool A-810-3
Pin
Contact
Sealing
Sleeve
Mounting Pattern
for Fig. 3 & 4
Fig. 4
Housing
Insulator
MICRODOT
Part No.
010-0081-0000
010-0082-0000
010-0083-0000
Thomas & Betts
Part No.
WT-400
WT-402
WT-406
Housing Sub-assembly
Plug
Inner
Sleeve
Middle
Sleeve
Max. Cable
Diameter
.088 [2.24]
.110 [2.79]
.155 [3.94]
Cable
Insulator
Jack
Socket
Contact
Housing
Insulator
Housing
Gasket
2-127
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT LEPRA/CON Ultra-Miniature Connectors
Performance Data Summary
For LEPRA/CON Connectors
Mechanical
Environmental
Captive Contacts — Terminated connector contacts captivated from movement in both directions.
Cable Retention —
10 lb. min. when properly assembled to
RG196/U and RG178/U cable.
Recommended Coupling Torque
(Threaded Interface) —
24 inch/ounces max.
Recommended Receptacle
Mounting Torque (All Series) —
24 inch/ounces max.
Typical Cable Acceptance
Dimensions — Inner conductor: .012
[0.31] nom. Dielectric: .039 [0.99] max.
Shield: .059 [1.50] max. Jacket: .081
[2.06] max.
Contact Protection (Unmated) —
Twist pin contact protected from damage
by insulator. Tube socket protected by
connector housing.
Temperature Range (Continuous
Service) — -85°F to +392°F
[-65°C to +200°C].
Vibration1,2 — MIL-STD-202, Method
204, Test Condition B (15 G peaks). No
physical damage or electrical discontinuities in excess of 1 microsecond.
Shock1,2 — MIL-STD-202, Method
213, Test Condition H. No physical damage or electrical discontinuity after
shock.
Thermal Shock — MIL-STD-202,
Method 107, Test Condition C.
Moisture Resistance1 — MIL-STD202, Method 106.
Salt Spray1 — MIL-STD-202, Method
101, Test Condition B (48 hours).
Assembly Methods
Straight Plugs & Jacks — Cable
Inner Conductor: Crimped to contact.
Cable Shield: Crimped under housing.
Right-Angle Plugs — Cable Inner
Conductor: Soldered to contact. Cable
Shield: Crimped under housing.
Electrical
Impedance — Designed to be compatible with 50 Ohm coaxial cable
RG178/U.
Dielectric Withstanding Voltage —
450 volts RMS at sea level, 250 volts
RMS at 50,000 ft [15,240 m], 150 volts
RMS at 70,000 ft. [21,336 m]
Contact Resistance — 8 milliohms
max., D.C.
Contact Capacity — 3 amps, D.C.
Insulation Resistance — 104
Megohms min. @ 500 volts D.C.
Voltage Standing Wave Ratio3
(VSWR) — Typical 50 Ohm Series, 1.2
Maximum to 2 GHz.
Materials
Housing, Nut, Ferrule — Brass per
ASTM-B-16.
Insulator — PTFE per
ASTM-D-1710.
Pin & Socket Contact — Copper
Alloy.
Crimp Sleeve — Copper Alloy.
Lockwasher — #425 Bronze Alloy.
Plating
Contacts, Housing, Nut, Ferrule,
Crimp Sleeve, Lockwasher —
Gold per MIL-G-45204, Type II, Grade
C, Class 1.
Notes:
1
Screw-On Series, threaded interface.
2
TE Connectivity recommends the
use of safety wired connectors in
vibration and shock environments.
See individual specifications with
wire holes.
3
VSWR is a system specification.
Where performance is critical,
purchase TE cable assemblies with
Screw-On connectors (See page 2140) and specify VSWR testing and
mating connector part numbers.
2-128
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT LEPRA/CON Ultra-Miniature Connectors — Screw-On Series
Featuring Twist Pin,
Pin and Socket Contacts,
Standard Interface
contacts contain seven selfwiping spring surfaces,
designed for consistent
continuity and very low
noise level. Twist pin contacts are self-aligning
because of the contactengaging-end configuration.
The sockets are a closed
entry tubular-type contact,
made of gold-plated
copper alloy.
The connectors are
designed to be used with
coaxial cables RG196/U
and RG178/U.
The connectors are
designed with the contacts
completely protected for
reliability. The use of twist
pin contacts makes the
connectors very rugged for
their size.
Solder Center
Conductor to Contact
.015
Dia.
[0.38]
3 Places
(142-0000-0003 Only)
2
RF Connectors
MICRODOT twist pin, pin
and socket contacts are
used in LEPRA/CON connectors. Twist pin contact
pins are produced from
beryllium copper material
with a gold-plated finish and
constructed with helicallywound stress free cable of
spring copper around a
highly conductive soft copper core, terminated with a
hemispherical weld. Twist pin
.395
[10.03]
.015 Dia.
[0.38]
3 Places
(142-0002-0003 Only)
.380
[9.65]
.125-44UNF-2B
[3.18] (Modified)
.580
[14.73]
.125 -44UNF-2B
[3.18] (Modified)
Straight Plugs1
Part No.
142-0000-0001
142-0000-0002
142-0000-0003
Right-Angle Plug1
Nut Style
.156 [3.96] Hex.
.160 [4.06] Dia. Knurl
.156 [3.96] Hex. w/ Safety Wire Holes
Part No.
142-0002-0001
142-0002-0002
142-0002-0003
Assembly instructions: RF-ASMB-12
Assembly instructions: RF-ASMB-13
.125-44UNF-2A
[3.18] (Modified)
.580
[14.73]
.270
[6.86]
.270
[6.86]
.156
[3.96]
Hex. Stk.
Nut Style
.156 [3.96] Hex.
.160 [4.06] Dia. Knurl
.156 [3.96] Hex. w/ Safety Wire Holes
.156
[3.96]
Hex. Stk.
Jack1
Part Number 141-0000-0001
Instruction Sheet Number 408-8510
Former MICRODOT I.S. Number RF-ASMB-12
.125-44UNF-2A
[3.18] (Modified)
.580
[14.73]
.093 Max.
[2.36] Panel
.125-44UNF-2A
[3.18] (Modified)
Bulkhead Jack1
Part Number 141-0001-0001
Instruction Sheet Number 408-8510
Former MICRODOT I.S. Number RF-ASMB-12
.425
[10.80]
.022 Solder Pot
[0.56] I.D.
.156
2 Plcs.
[3.96]
.093 Max.
[2.36] Panel
.260
[6.60]
.022
Turret I.D.
[0.56]
Turret
.140
[3.56]
.156
[3.96]
2 Plcs.
.093 Max.
[2.36] Panel
.425
[10.80]
.125-44UNF-2B
[3.18] (Modified)
Front Mount Receptacle1
Part No.
141-0002-0001
141-0002-0002
.022
Solder Pot I.D.
[0.56]
Rear Mount Receptacle1
Contact Tail
Turret
Solder Pot
Part No.
141-0003-0001
141-0003-0002
Contact Tail
Turret
Solder Pot
Mounting hole pattern and assembly tools shown on page 2-134.
1
2-129
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT LEPRA/CON Ultra-Miniature Connectors — Screw-On Series (Continued)
Featuring Twist Pin,
Pin and Socket Contacts,
Standard Interface (Continued)
.225
[5.72]
.125-44UNF-2A
[3.18] (Modified)
.172
[4.37]
.026
Dia.–Typ.
[.660]
Straight Printed Circuit Receptacle1
Part No. 141-0004-0001
.370
[9.40]
.370
[9.40]
Cavity Potted
With Epoxy
Cavity Potted
With Epoxy
.120
[3.05]
.385
[9.78]
.385
[9.78]
.125-44UNF-2A
Thd.
[3.18] (Modified)
.125-44UNF-2A
Thd.
[3.18] (Modified)
.172
[4.37]
.172
[4.37]
.026 Dia.
[6.60] 5 Plcs.
.120
[3.05]
.026 Dia.
[6.60] Typ.
Shipping Fixture
Right-Angle Printed Circuit Receptacle1
(Small Mounting Pattern)
Part Number 141-0019-0001
Right-Angle Printed Circuit Receptacle1
(Standard Mounting Pattern)
Part Number 141-0010-0001
.545
[13.84]
.205
[5.21]
.080 Max.
[2.03] Panel
.125 -UNF44-2A Thd.
[3.18] (Modified)
Both Ends
.202
[5.13]
Min.
.217
[5.51]
.216-32 UNF
[5.49] Thd.
.250 Hex.
[6.35] 2 Plcs.
.156
[3.96]
Hex.
Feed-Thru Bulkhead Adapter
(Both Ends are Receptacle Interface)
Part Number 143-0005-0001
.125-44 UNF-2A
[3.18] (Modified)
.275
[6.99]
.093 Max.
[2.36] Panel
.490
[12.45]
Straight Plug
.115
[2.92]
.156
[3.96]
Sq.
.285
[7.24]
Cavity Filled
With Epoxy
Right-Angle Receptacle1
Part Number 141-0013-0001
Mounting hole pattern and assembly tools shown on page 2-134.
1
2-130
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT LEPRA/CON Ultra-Miniature Connectors — Screw-On Series (Continued)
Featuring Twist Pin,
Pin and Socket Contacts
with Locking Interface
The MICRODOT LEPRA/CON
coaxial connector series is
now offered with a unique
locking interface feature.
This new coupling design
permits the user to lock the
coaxial plug, when mated to
its receptacle, preventing
any axial rotation. This
adaptation is especially
popular on connector installations requiring straight or
90° cable terminations firmly held in a fixed position.
The locking interface is
especially suited for
telecommunications and
instrumentation applications.
.395
[10.03]
.015 Dia. 3 Plcs.
[0.38] (142-0010-0003 Only)
.015 Dia. 3 Plcs. Ref.
[0.38] (142-005-0003 Only)
.125-44UNF-2B
[3.18] (Modified)
.380
[9.65]
.125-44UNF-2B
[3.18] (Modified)
RF Connectors
Solder Center
Conductor to Contact
2
.580
[14.73]
Straight Plug1
Part No.
142-0010-0001
142-0010-0002
142-0010-0003
Right-Angle Plug1
Nut Style
.156 [3.96] Hex.
.160 [4.06] Dia. Knurl
.156 [3.96] Hex. w/ Safety Wire Holes
Assembly instructions: RF-ASMB-12, 142-0010-0001
Part No.
142-0005-0001
142-0005-0002
142-0005-0003
Nut Style
.156 [3.96] Hex.
.160 [4.06] Dia. Knurl
.156 [3.96] Hex. w/ Safety Wire Holes
Assembly instructions: RF-ASMB-13, 142-0005-0001
Assembly tools; page 2-134.
1
2-131
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT LEPRA/CON Ultra-Miniature Connectors — Screw-On Series (Continued)
Featuring Twist Pin,
Pin and Socket Contacts
with Locking Interface
(Continued)
.590
[14.99]
.156
[3.96]
.590
[14.99]
.285
[7.24]
.125-44UNF-2A
[3.18] (Modified)
.125-44UNF-2A
[3.18] (Modified)
.156 2 Plcs.
[3.96]
Straight Jack1
Part Number 141-0017-0001
Instruction Sheet Number 408-8510
Former MICRODOT I.S. Number RF-ASMB-12
.125-44UNF-2A
[3.18] (Modified)
.093 Max.
[2.36] Panel
Bulkhead Jack1
Part Number 141-0014-0001
Instruction Sheet Number 408-8510
Former MICRODOT I.S. Number RF-ASMB-12
.022 Solder Pot
[.559] I.D.
.156 Hex.
[3.96] 2 Plcs.
.022 Solder Pot
[.559] I.D.
Turret
.156 2 Plcs.
[3.96]
Turret
.155
[3.94]
.275
[6.99]
.093 Max.
[2.36] Panel
.125-44UNF-2A Thd.
[3.18] (Modified)
.440
[11.18]
Front Mount Receptacle1
Part No.
141-0012-0001
141-0012-0002
.093 Max.
[2.36] Panel
.440
[11.18]
Rear Mount Receptacle w/ Locking Interface1
Contact Tail
Solder Pot
Turret
Part No.
141-0011-0001
141-0011-0002
Contact Tail
Turret
Solder Pot
.240
[6.10]
.172
[4.37]
.125-44UNF-2A
[3.18] (Modified)
.156
[3.96]
.026 Dia.
[0.66] Typ.
.125-44UNF-2A
[3.18] (Modified)
.275
[6.99]
Straight Printed Circuit Receptacle1
Part Number 141-0015-0001
.093 Max.
[2.36] Panel
.490
[12.45]
.385
[9.78]
Cavity Potted
With Epoxy
.120
[3.05]
.115
[2.92]
Cavity Filled
With Epoxy
.156
Sq.
[3.96]
.385
[9.78]
.125-44UNF-2A
[3.18] (Modified)
.300
[7.62]
.172
[6.77]
Right-Angle Receptacle1
Part Number 141-0020-0001
.026 Dia.
[.660] 5 Plcs.
Shipping Fixture
Right-Angle Printed Circuit Receptacle1
Part Number 141-0023-0001
Mounting hole pattern and assembly tools shown on page 2-134.
1
2-132
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT LEPRA/CON Ultra-Miniature Connectors — Slide-On Series
LEPRA/CON Slide-On
Connectors offer a convenient mating style along with
Ultra-miniature size. Inner
contacts are twist pin tubular
sockets in plugs and twist
pin contacts for jacks
and receptacles. Positive
housing contact is provided
by a three finger contact in
the plug housing.
Featuring Twist Pin,
Pin and Socket Contacts
2
RF Connectors
.125
[3.18]
.610
[15.49]
.125
Dia.
[3.18]
.440
[11.18]
Straight Plug1
Part Number 142-1000-0001
Instruction Sheet Number 408-8512
Former MICRODOT I.S. Number RF-ASMB-15
.380
[9.65]
Right-Angle Plug1
Part Number 142-1002-0001
Instruction Sheet Number 408-8513
Former MICRODOT I.S. Number RF-ASMB-16
.250 Hex.
[6.35] 2 Plcs.
.190 -32UNF-2 Thd.
[4.83]
.640
[16.26]
.335
[8.51]
.140 Max.
[3.56] Panel
.265
[6.73]
.093 Max.
[2.36] Panel
Ø .191
Min.
[4.85]
.445
[11.30]
Mounting
Hole
.490
[12.45]
Right-Angle Bulkhead Mount Plug1
Part Number 142-1021-0001
Instruction Sheet Number 408-8519
Former MICRODOT I.S. Number RF-ASMB-76
.570
[3.99]
.156 Hex.
[3.96] 2 Plcs.
.125-44UNF-2A
[3.18] (Modified)
Straight Bulkhead Jack1
Part Number 141-1001-0001
Instruction Sheet Number 408-8512
Former MICRODOT I.S. Number RF-ASMB-15
.220
[5.59]
.495
[12.57]
.022 Solder Pot
[0.56] I.D.
.093 Max.
[2.36] Panel
Turret
.125
Dia.
[3.18]
Straight Jack1
Part Number 141-1000-0001
Instruction Sheet Number 408-8512
Former MICRODOT I.S. Number RF-ASMB-15
Mounting hole and assembly tools shown on page 2-134.
1
.125-44UNF-2
[3.18] (Modified)
.156 Hex.
[3.96] 2 Plcs.
Front Mount Receptacle1
Part No.
141-1002-0001
141-1002-0002
Contact Tail
Turret
Solder Pot
2-133
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT LEPRA/CON Ultra-Miniature Connectors — Slide-On Series (Continued)
Featuring Twist Pin,
Pin and Socket Contacts
(Continued)
.156
Hex.
[3.96]
.022 Solder Pot
[.559] I.D.
.275
.490 [6.99]
[12.45]
.125-44UNF-2A
[3.18] (Modified)
.335
[8.51]
.156
[3.96]
Hex. 2 Plcs.
Turret
.093 Max.
[2.36] Panel
.115
[2.92]
.495
[12.57]
.156
Sq.
[3.96]
Part No.
141-1003-0001
141-1003-0002
Cavity Filled
With Epoxy
.385
[9.78]
Rear Mount Receptacle
Right-Angle Receptacle
Mounting Hole Shown Below
Part Number 141-1012-0001
Contact Tail
Turret
Solder Pot
Mounting Hole shown below.
.425
[10.80]
.026
Dia. Typ
[0.66]
.385
[9.78]
.097 Dia.
[2.46]
.120
[3.05]
.172
[4.37]
.260
[6.60]
.172
[4.37]
.026
Dia. Typ.
[0.66]
Straight Printed Circuit Receptacle
Mounting Hole Pattern Shown Below
Part Number 141-1004-0001
.126
[3.20]
Min.
Right-Angle Printed Circuit Receptacle
Mounting Hole Pattern Shown Below
Part Number 141-1005-0001
.045–.055
Typ.
[1.14–1.40]
.095–.105 Typ.
[2.41–2.67]
.046 Dia. Min.
[1.17] 5 Holes
.095–.105 Typ.
[2.41–2.67]
.114 Min.
[2.90]
.195–.205 Typ.
[4.95–5.21]
Bulkhead Receptacle Mounting Hole
.046 Dia. Min.
[1.17] 5 Holes
Small Pattern
Connectors 141-0019-0001
and 141-0023-0001 Only
Standard Pattern
Printed Circuit Receptacle Mounting Hole Pattern
LEPRA/CON Connector Assembly Tools
Contact Crimp Tool
Housing Crimp Tool
Part No.
010-0132-0000
Thomas & Betts Part No.
WT-419
Connector
Straight
Connector Only
141-1001-0001
Contact Crimp No.
Astro Tool Part No.
010-0150-0000
A-826-1
010-0161-0000
827
2-134
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT LEPRA/CON Ultra-Miniature Connectors (Continued)
BNC / LEPRA/CON
Connector Adapters
.125-44UNF-2A
[3.18] (Modified)
End B
.125-44UNF-2A
[3.18] (Modified)
End A
End B
End A
.850
[21.59]
End “B” is MICRODOT
End “A” is BNC Plug
Screw-On Plug
Part Number 143-0001-0001
.950
[24.13]
End “A” is BNC Receptacle
End “B” is MICRODOT
Screw-On Receptacle
Part Number 143-0003-0001
.125-44UNF-2B
[3.18] (Modified)
.125-44UNF-2A
[3.18] (Modified)
End B
End A
End A
RF Connectors
.900
[22.86]
2
End B
.865
[21.97]
End “A” is BNC Plug
End “B” is MICRODOT Screw-On Plug
with Locking Interface
Part Number 143-0029-0001
End “A” is BNC Receptacle
End “B” is MICRODOT Screw-On
Receptacle with Locking Interface
Part Number 143-0032-0001
.835
[21.21]
End B
End A
.125-44UNF-2A
[3.18] (Modified)
End A
End B
.785
[19.94]
End “B” is Screw-On Receptacle
End “A” is BNC Plug
Part Number 143-0002-0001
End “A” is BNC Plug
End “B” is MICRODOT
Slide-On Plug
Part Number 143-1000-0001
2-135
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT LEPRA/CON Ultra-Miniature Connectors (Continued)
BNC / LEPRA/CON
Connector Adapters
(Continued)
.800
[20.32]
.900
[22.86]
.125-44UNF-2A
[3.18] (Modified)
End B
End A
End B
End A
End “A” is BNC Plug
End “B” is MICRODOT Receptacle with
Locking Interface
Part Number 143-0031-0001
End “A” is BNC Plug
End “B” is MICRODOT
Slide-On Receptacle
Part Number 143-1002-0001
.125-44UNF-2B
[3.18] (Modified)
End A
End B
End A
End B
.965
[24.51]
.900
[22.86]
End “A” is BNC Receptacle
End “B” is MICRODOT
Screw-On Plug
Part Number 143-0004-0001
End “A” is BNC Receptacle
End “B” is MICRODOT
Slide-On Plug
Part Number 143-1001-0001
.125-44UNF-2B
[3.18] (Modified)
End A
End A
End B
End B
.965
[24.51]
1.015
[25.78]
End “A” is BNC Receptacle
End “B” is MICRODOT Screw-On Plug
with Locking Interface
Part Number 143-0030-0001
End “A” is BNC Receptacle
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
End “B” is MICRODOT
Slide-On Receptacle
Part Number 143-1003-0001
2-136
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are in millimeters
unless otherwise specified.
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT LEPRA/CON Ultra-Miniature Connectors — Snap-Lock Series
Product Facts
Simple coupling design
eliminates the need for
tools and saves assembly
time
■
Positive locking mechanism
provides its own fail-safe
features
■
Inspection of the mated connector is fast, simple and
effective
■
Push-Pull design allows
higher panel density
■
Quick-connect and disconnect features
Performance Data Summary
For Snap-Lock Connectors
2
RF Connectors
■
Electrical
Environmental
Impedance — Designed to be compatible with 50 Ohm coaxial cables
(Dual Shield RG 196).
Dielectric Withstanding Voltage —
450 volts RMS at sea level (Operating).
Contact Resistance — 8 milliohms
max. at 3 amps. Average resistance: 4
milliohms
Insulation Resistance — 104
megohms min.
Voltage Standing Wave Ratio
(VSWR) — 3.4 max., 1.3 min. to 12 GHz.
Temperature Range —
-85°F to +257°F [-65°C to +125°C].
Vibration — MIL-STD-202, Method
204, Test condition D. No change in
electrical discontinuity in excess of 1
microsecond.
Shock — MIL-STD-202, Method 213A,
Test Condition C. No electrical discontinuity or evidence of physical damage.
.093 Max.
[2.36] Panel
.406
[10.31]
8-32 UNC-2A (Modified)
.219
[5.56]
.093 Max.
[2.36] Panel
.406
[10.31]
8-32 UNC-2A (Modified)
.312
[7.92]
Bulkhead Jack, Rear Mount
Part Number 145-0001-0001
.219
[5.56]
.625
[15.88]
Body and Body Components —
Brass per QQ-B-626 Comp 360.
Contact Material — Copper Alloy.
Crimp Sleeves — Leaded Copper.
Insulators — PTFE per
ASTM-D-1710.
Lockwashers — #425 Bronze Alloy.
Plating — Gold per MIL-G-45204,
Type II, Grade C, Class 1.
Cable Acceptance Dimensions —
Center conductor — .012 [0.31] nom.
Dielectric — .040 [1.02] max.
Shield — .080 [2.03] max.
Jacket — .090 [2.29] max..
.750
[19.05]
Straight Plug
Part Number 144-0001-0001
Materials
Mechanical
.250
[6.35]
.719
[18.26]
All-Crimp Assembly —
Center contacts and shield are crimped
individually.
Durability — 500 mating cycles.
.312
[7.92]
Receptacle, Rear Mount
Part Number 145-0003-0001
.219
[5.56]
.093 Max.
[2.36] Panel
.165–.168
[4.19–4.27]
“D” Hole Dimensions
For Panel Mounting
.625
[15.88]
.312
[7.92]
.146–.149
[3.71–3.78]
Connector/Cable Assembly
Crimp Tools — Center Contact
and Shield
.285
[7.24]
8-32 UNC-2A (Modified)
Tool
SKT &
Pin Crimp
Housing
Crimp
Part No.
010-1004-0000
010-0081-0000
Receptacle, Front Mount
Part Number 145-0002-0001
2-137
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Cable Assemblies
no tooling charges, precision construction, thorough
inspection and prompt
delivery. The capability also
makes it possible for the
designer to specify a complete assembly or harness
with the understanding that
TE will deliver a custom
fabrication equal in quality
to the MICRODOT compo-
Capability
The experience
TE Connectivity has gained
through years of pioneering
efforts in the development
of MICRODOT miniaturized
cable and connectors is
available to customers in
the assembly of complex
cable/connector combinations. This experience offers
the customer low cost and
How To Order
1. Specify MICRODOT part numbers
A. Connector, one end
nents it contains. These
assemblies are made to the
customer’s specifications or
are designed by the
Company’s experienced
engineers to fit particular
requirements. Special
features are light weight,
reduced size, high operating
temperatures and
comprehensive layouts.
3. Specify length tolerance
A. Standard tolerance
B. Connector, other end
Assembly Length
0 thru 12-1/2"
C. Cable
Tolerance
±1/8"
±1% rounded to
nearest 1/4"
±1% rounded to
nearest 1"
Over 12-1/2" thru 1000"
2. Specify normal length
A. Overall length
Over 1000"
Jacks
Plugs
B. Special tolerance
Tolerances as close as ±.5% are
available for most cable assemblies
at a premium rate. Consult
TE Connectivity for details.
O. A. L.
Right Angles
Jacks
4. Specify cable strip (Applies to cable
assemblies with only one connector)
O. A. L.
Right Angles
A. Not stripped
Right Angles
B. Standard strip
1⁄2"
O. A. L.
B. Or length between connectors
Jacks
Plugs
1⁄2"
Cable Length
Between
Connectors
Right Angles
Jacks
1⁄2"
Standard Strip
C. Special strip - specify style
Example:
Cable Length
Between
Connectors
Right Angles
Right Angles
Connector:
142-1000-0001 one end
142-1002-0001 other end
Length:
36" overall, standard tolerance
Cable Length
Between
Connectors
2-138
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Cable Assemblies (Continued)
Mating Interface Chart
Screw-On
Slide-On
Plugs
Description
Standard
Gold Plated Crimp Style
Cap
Standard
Gold Plated Crimp Style
Cap
Standard
Gold Plated Crimp Style
Cap
Standard
Standard
Standard
Standard
Standard
Standard
Twinax
Twinax
Triax
LEPRA/CON Connector
LEPRA/CON Connector
Interlocking Interface
LEPRA/CON Connector
Page
2-105, 2-106
2-124, 2-125
2-120
2-105, 2-106
2-124, 2-125
2-120
2-105, 2-106
2-125
2-120
2-110, 2-111
2-111, 2-112
2-111, 2-112
2-114, 2-115
2-115
2-115
2-117
2-117
2-118
2-129
Series
S50
50 Ohm
50 Ohm
S70
70 Ohm
70 Ohm
S93
93 Ohm
93 Ohm
SOS 50
SOS 70
SOS 93
QC 50
QC 70
QC 93
Screw-On
Slide-On
Screw-On
Screw-On
2-131
Screw-On
2-133
Slide-On
Jacks and Receptacles
Description
Standard
Gold Plated Crimp Style
Feed Thru Adapter
Standard
Gold Plated Crimp Style
Feed Thru Adapter
Standard
Gold Plated Crimp Style
Feed Thru Adapter
Standard
Standard
Standard
Standard
Standard
Standard
Twinax
Twinax
Triax
LEPRA/CON Connector
LEPRA/CON Connector
Interlocking Interface
LEPRA/CON Connector
Page
2-107, 2-108
2-126, 2-127
2-121, 2-122
2-107, 2-108
2-126, 2-127
2-121, 2-122
2-107, 2-109
2-126, 2-127
2-121, 2-122
2-110, 2-113
2-112, 2-113
2-112, 2-113
2-114
2-114
2-114
2-117
2-117
2-118
2-129, 2-130
2
RF Connectors
Series
S50
50 Ohm
50 Ohm
S70
70 Ohm
70 Ohm
S93
93 Ohm
93 Ohm
SOS 50
SOS 70
SOS 93
QC 50
QC 70
QC 93
Screw-On
Slide-On
Screw-On
Screw-On
2-132
2-133, 201
2-139
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Cable Acceptance Dimensions
Standard Connectors
Screw-On Series
Straight Plugs — Page 2-105
Connector
Part No.
Max.
Jacket
Max.
Shield
Max.
Dielectric
Max.
Inner
Conductor
032-0021-0001
.087
2.21
.087
2.21
.093
2.36
.093
2.36
.087
2.21
.087
2.21
.088
2.24
.088
2.24
.087
2.21
.087
2.21
.087
2.21
.093
2.36
.087
2.21
.061
1.55
.061
1.55
.068
1.73
.077
1.96
.061
1.55
.061
1.55
.061
1.55
.061
1.55
.061
1.55
.061
1.55
.061
1.55
.068
1.73
.061
1.55
.050
1.27
.041
1.04
.050
1.27
.047
1.00
.050
1.27
.041
1.04
.041
1.04
.041
1.04
.050
1.27
.041
1.04
.041
1.04
.041
1.04
.041
1.04
.013
.330
.015
.381
.013
.330
.015
.381
.015
.381
.015
.381
.015
.381
.015
.381
.013
.330
.015
.381
.015
.381
.015
.381
.015
.381
.093
2.36
.093
2.36
.108
2.74
.108
2.74
.093
2.36
.093
2.36
.075
1.91
.075
1.91
.079
2.01
.079
2.01
.075
1.91
.075
1.91
.061
1.55
.059
1.50
.059
1.50
.061
1.55
.059
1.50
.059
1.50
.013
.330
.015
.381
.015
.381
.013
.330
.015
.381
.015
.381
.134
3.40
.134
3.40
.154
3.91
.134
3.40
.155
3.94
.134
3.40
.134
3.40
.118
2.99
.118
2.99
.118
2.99
.118
2.99
.125
3.18
.118
2.99
.118
2.99
.100
2.54
.100
2.54
.101
2.67
.097
2.446
.107
2.72
.100
2.54
.100
2.54
.013
.330
.015
.381
.015
.381
.031
.787
.015
.381
.015
.381
.015
.381
S-50
032-0023-0001
032-0025-0001
032-0033-0001
032-0097-0001
032-0098-0001
032-0155-0001
032-0156-0001
052-0213-0001
052-0235-0001
052-0235-0003
052-0370-0001
052-0542-0001
S-70
032-0010-0001
032-0022-0001
032-0067-0001
032-0078-0001
032-0222-0001
052-0092-0001
S-93
032-0011-0001
032-0017-0001
032-0066-0001
032-0071-0001
032-0092-0001
032-0099-0001
052-0200-0001
2-140
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Cable Acceptance Dimensions (Continued)
Screw-On Series (Continued)
Connector
Part No.
Max.
Jacket
Max.
Shield
Max.
Dielectric
Nom.
Inner
Conductor
032-0015-0001
.092
2.34
.092
2.34
.092
2.34
.111
2.81
.060
1.52
.060
1.52
.060
1.52
.074
1.88
Any
.012
.305
.012
.305
.012
.305
.012
.305
.111
2.81
.111
2.81
.111
2.81
.074
1.88
.074
1.88
.074
1.88
.134
3.40
.155
3.94
.155
3.94
.134
3.40
.134
3.40
.155
3.94
.123
3.12
.118
2.99
.118
2.99
.123
3.12
.123
3.12
.118
2.99
Connector
Part No.
Max.
Jacket
Max.
Shield
Max.
Dielectric
Max.
Inner
Conductor
031-0033-0001
.088
2.24
.087
2.21
.079
2.01
.061
1.55
.061
1.55
.061
1.55
.041
1.04
.041
1.04
.041
1.04
.021
.533
.021
.533
.021
.533
.093
2.36
.093
2.36
.109
2.77
.075
1.91
.075
1.91
.079
2.01
.059
1.50
.059
1.50
.059
1.50
.021
.533
.021
.533
.021
.533
.134
3.40
.134
3.40
.154
3.91
.154
3.91
.118
2.99
.118
2.99
.118
2.99
.118
2.99
.100
2.54
.100
2.54
.101
2.57
.101
2.57
.021
.533
.021
.533
.021
.533
.021
.533
Right-Angle Plugs — Page 2-106
S-50
052-0204-0001
052-0215-0001
Any
Any
2
RF Connectors
052-0337-0001
Any
S-70
032-0013-0001
052-0299-0001
052-0379-0001
Any
Any
Any
.012
.305
.012
.305
.012
.305
S-93
032-0014-0001
032-0068-0001
032-0153-0001
052-0207-0001
052-0298-0001
052-0304-0022
Jacks — Page 2-107
Any
Any
Any
Any
Any
Any
.012
.305
.012
.305
.012
.305
.012
.305
.012
.305
.012
.305
S-50
031-0034-0001
051-0467-0001
S-70
031-0036-0001
031-0048-0001
031-0090-0001
S-93
031-0032-0001
031-0037-0001
031-0088-0001
031-0089-0001
2-141
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Cable Acceptance Dimensions (Continued)
Slide-On Series
Straight Plugs — Page 2-111
Max.
Jacket
Max.
Shield
Max.
Dielectric
Max.
Inner
Conductor
.088
2.24
.088
2.24
.058
1.47
.058
1.47
.041
1.04
.041
1.04
.015
.381
.015
.381
.093
2.36
.093
2.36
.108
2.74
.075
1.71
.075
1.71
.079
2.01
.059
1.50
.059
1.50
.059
1.50
.015
.381
.015
.381
.015
.381
032-0084-0001
.134
3.40
.134
3.40
.154
3.91
.118
2.99
.118
2.99
.118
2.99
.100
2.54
.100
2.54
.101
2.57
.015
.381
.015
.381
.015
.381
Connector
Part No.
Max.
Jacket
Max.
Shield
Max.
Dielectric
Nom.
Inner
Conductor
.092
2.34
.060
1.52
Any
.012
.305
.111
2.82
.074
1.88
Any
.012
.305
.134
3.40
.155
3.94
.123
3.12
.118
2.99
Any
.012
.305
.012
.305
Max.
Jacket
Max.
Shield
Max.
Dielectric
Max.
Inner
Conductor
.088
2.24
.088
2.24
.061
1.55
.061
1.55
.041
1.04
.041
1.04
.021
.533
.021
.533
.108
2.74
.079
2.01
.059
1.50
.021
.533
.134
3.40
.134
3.40
.154
3.91
.154
3.91
.118
2.99
.118
2.99
.118
2.99
.118
2.99
.100
2.54
.100
2.54
.101
2.57
.101
2.57
.021
.533
.021
.533
.021
.533
.021
.533
Connector
Part No.
SOS-50
032-0055-0001
032-0056-0001
SOS-70
032-0060-0001
032-0061-0001
032-0087-0001
SOS-93
032-0058-0001
032-0077-0001
Right-Angle Plugs — Page 2-112
SOS-50
032-0063-0001
SOS-70
032-0062-0001
SOS-93
032-0059-0001
032-0083-0001
Jacks — Page 2-112
Connector
Part No.
Any
SOS-50
031-0053-0001
031-0054-0001
SOS-70
031-0095-0001
SOS-93
031-0063-0001
031-0064-0001
031-0093-0001
031-0094-0001
2-142
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Cable Acceptance Dimensions (Continued)
Quick-Connect Series
Connector
Part No.
Max.
Jacket
Max.
Shield
Max.
Dielectric
Max.
Inner
Conductor
032-0002-0001
.093
2.36
.093
2.36
.058
1.47
.058
1.47
Any
.041
1.04
.013
.330
.015
.381
.093
2.36
.093
2.36
.108
2.74
.075
1.91
.075
1.71
.079
2.01
.061
1.55
.059
1.50
.059
1.50
.013
.330
.015
.381
.015
.381
032-0072-0001
.134
3.40
.134
3.40
.154
3.91
.118
2.99
.118
2.99
.118
2.99
.100
2.54
.100
2.54
.101
2.57
.013
.330
.015
.381
.015
.381
Connector
Part No.
Max.
Jacket
Max.
Shield
Max.
Dielectric
Nom.
Inner
Conductor
032-0026-0001
.092
2.34
.060
1.52
Any
.012
.305
.111
2.82
.074
1.88
Any
.012
.305
.134
5.40
.155
3.94
.123
3.12
.118
2.99
Any
.012
.305
.012
.305
Connector
Part No.
Max.
Jacket
Max.
Shield
Max.
Dielectric
Max.
Inner
Conductor
031-0038-0001
.093
2.36
.061
1.55
.041
1.04
.021
.533
031-0040-0001
.134
3.40
.118
2.99
.100
2.54
.021
.533
Connector
Part No.
Max.
Jacket
Max.
Shield
Max.
Dielectric
032-0088-0001
052-0324-0001
.167
4.24
.123
3.12
.123
3.12
.167
4.24
.142
3.60
.092
2.34
.092
2.34
.142
3.61
.061
1.55
.042
1.07
.042
1.07
.061
1.55
Max.
Inner
Conductor
.014
.356
.014
.356
.014
.356
.014
.356
Connector
Part No.
Max.
Jacket
Max.
Shield
Max.
Dielectric
051-0358-0001
.167
4.24
.167
4.24
.142
3.60
.142
3.61
.061
1.55
.061
1.55
Straight Plugs — Page 2-115
QC-50
032-0030-0001
2
QC-70
032-0016-0001
032-0079-0001
RF Connectors
032-0031-0001
QC-93
032-0012-0001
032-0032-0001
Right-Angle Plugs — Page 2-115
QC-50
QC-70
032-0027-0001
QC-93
032-0020-0001
052-0228-0001
Jacks — Page 2-116
Any
QC-50
QC-93
Twinax
Plugs — Page 2-117
032-0093-0001
052-0229-0001
Jacks — Page 2-117
051-0389-0001
Max.
Inner
Conductor
.020
.508
.020
.508
2-143
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Cable Acceptance Dimensions (Continued)
Triax
Plugs — Page 2-118
Connector
Part No.
Max.
Jacket
052-0130-0001
.124
3.15
.183
4.65
.214
5.44
052-0138-0001
052-0593-0001
Gold Plated Crimp Style
Coaxial Connectors
Straight Plugs — Pages 2-124,
2-125
Connector
Part No.
50 Ohm Series
132-0112-000*
132-0113-000*
132-0114-000*
132-0115-000*
132-0509-0002
Max.
Outer
Shield
Single
Shield
Single
Shield
Single
Shield
Max.
Outer
Dielectric
.085
2.26
.146
3.71
.166
4.22
Max.
Jacket
Max.
Dielectric
Nom.
Inner Conductor
.088
2.24
.088
2.24
.110
2.79
.110
2.79
.116
2.95
.039
.991
.039
.991
.070
1.78
.070
1.78
.070
1.78
.012
.305
.012
.305
.012
.305
.012
.305
.012
.305
.110
2.79
.110
2.79
.070
1.78
.070
1.78
.012
.305
.012
.305
.155
3.94
.155
3.94
.107
2.72
.107
2.72
.012
.305
.012
.305
Max.
Jacket
Max.
Dielectric
Nom.
Inner Conductor
.088
2.24
.088
2.24
.110
2.79
.110
2.79
.039
.991
.039
.991
.074
1.88
.074
1.88
.012
.305
.012
.305
.012
.305
.012
.305
.110
2.79
.110
2.79
.074
1.88
.074
1.88
.012
.305
.012
.305
.155
3.94
.155
3.94
.107
2.72
.107
2.72
.012
.305
.012
.305
Max.
Inner
Shield
Single
Shield
.118
2.99
.161
4.09
Max.
Inner
Dielectric
.041
1.04
.107
2.72
.131
3.33
Max.
Inner
Conductor
.014
.356
.014
.356
.020
.508
70 Ohm Series
132-0200-000*
132-0201-000*
93 Ohm Series
132-0300-000*
132-0301-000*
Right-Angle Plugs — Page 2-125
Connector
Part No.
50 Ohm Series
132-0116-0002
132-0117-0002
132-0118-0002
132-0119-0002
70 Ohm Series
132-0202-0002
132-0203-0002
93 Ohm Series
132-0302-0002
132-0303-0002
2-144
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Cable Acceptance Dimensions (Continued)
Gold Plated Crimp Style
Coaxial Connectors (Continued)
Jacks — Page 2-126
Connector
Part No.
50 Ohm Series
131-0134-0001
131-0135-0001
131-0136-0001
131-0137-0001
Max.
Dielectric
Nom.
Inner Conductor
.088
2.24
.088
2.24
.110
2.79
.110
2.79
.039
.991
.039
.991
.070
1.78
.070
1.78
.012
.305
.012
.305
.012
.305
.012
.305
.110
2.79
.110
2.79
.070
1.78
.070
1.78
.012
.305
.012
.305
.155
3.94
.155
3.94
.107
2.72
.107
2.72
.012
.305
.012
.305
Max.
Jacket
.081
2.06
Max.
Dielectric
.040
1.02
Nom.
Inner Conductor
.012
.305
2
RF Connectors
Max.
Jacket
70 Ohm Series
131-0200-0001
131-0201-0001
93 Ohm Series
131-0300-0001
131-0301-0001
LEPRA/CON Connectors
All — Pages 2-129 to 2-137
Connector
Part No.
All
2-145
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Coaxial Connectors
MICRODOT Hermetic Connectors
Coaxial Screw-On,
Slide-On Series
Material and Finish
Service and Performance Data
50 Connector uses 10-32 thread.
70 Connector uses 12-32 thread.
93 Connector uses 1/4-32 thread.
Housing (1) — Cold rolled steel silver
plate.
Gasket (2) — Neoprene or silicone
rubber.
Insulator (3) — PTFE.
Glass Seal (4)
Center Contact (5) — Nickel Iron
alloy contact with slotted turret type
solder pot (other terminations available).
Temperature Range —
-65°F to 450°F [–54°C to 232°C] .
Electrical — 750 VAC working voltage.
Performance — 1200 VAC test at
sea level.
Insulation Resistance — 5000
megohms at 500 VDC (room temperature).
Shock — 100 G’s minimum.
Pressure — 100 PSI minimum.
Leak Rate Per Seal — Less than
1.04 x 10-8 cc/sec. (.001 Micron cubic
ft/hr) of 100% helium tested at one
atmosphere pressure differential far
exceeding requirements of MIL-C-26500
and MIL-C-26482.
Plating — Silver unless otherwise
specified.
X
Bulkhead Solder Mount
A
.25
[6.35]
.125
[3.18]
.281
[7.14]
.125
[3.18]
D
ØC ØB
X
D
A
.438
[11.13]
X
Y
ØC
.438
[11.13]
A
.125 Typ.
[3.18]
D
Fig. 1
ØC ØB
ØB
Fig. 2
Part No.
Fig.
051-0049-0001
1
051-0056-0001
1
053-0228-0001
2
051-0315-0001
3
A
.563
14.30
.563
14.30
.594
15.09
.656
16.66
Fig. 3
B Dia.
.25
6.35
.313
7.95
.25
6.35
.25
6.35
C Dia. ±.015
.200
5.08
.251
6.38
.227
5.77
.195
4.95
D
.125
3.18
.125
3.18
.234
5.94
.063
1.60
X*
Y*
S-50
—
S-93
—
S-50
S-50
S-50
—
* “S” indicates Screw-On Series
Dimensions are subject to change without notice.
A
Bulkhead Solder Mount,
Panel Insulated
.328
[8.33]
ØB
A
Glass Seal
A
Ø .203
[5.16]
Y
X
D
.063
[1.60]
Y
X
ØC
ØC
.047
[1.19]
.125
[3.18]
.063
[1.60]
D
Fig. 1
C
ØB
.047
[1.19]
Glass Seal
Fig. 2
Part No.
Fig.
051-0232-0001
1
053-0227-0001
2
053-0412-0001
2
053-0028-0001
3
A
.563
14.30
.609
15.47
.609
15.47
.609
15.47
B Dia.
.406
10.31
.625
15.88
.625
15.88
.625
15.88
Y
X
.063
[1.60]
Fig. 3
C Dia.
.370
9.40
.540
13.72
.540
13.72
.540
13.72
D
.172
4.37
.297
7.54
.297
7.54
.297
7.54
X*
Y*
S-50
S-50
S-50
S-93
S-93
SOS-50
S-50
* “S” indicates Screw-On Series; “SOS” indicates Slide-On Series
Dimensions are subject to change without notice.
2-146
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
B
MICRODOT Coaxial Connectors
MICRODOT Hermetic Connectors (Continued)
Coaxial Screw-On, Slide-On Series
A
(Continued)
G
.094
[2.38]
Microminiature Coaxial
Receptacles
Y
B X
Hex.
2
M
D
H
RF Connectors
C Thd.
E
Mounting Hole
F
Part No.
053-0455-0001
053-0636-0001
A
.688
17.46
.922
23.42
B Hex.
.563
14.29
.625
15.88
C Thd.
5/16-32
UNEF-2A
3/8-32
UNEF-2A
D
.297
7.54
.344
8.73
E
.094
2.38
.078
1.98
F
.203
5.16
.203
5.16
G
.25
6.35
.438
11.11
H
.312
7.92
.375
9.53
M
.291
7.39
.347
8.81
X*
Y*
S-50
S-50
S-93
S-93
* “S” indicates Screw-On Series
Dimensions are subject to change without notice.
Solder Mount Slide-On Series
Receptacles
A
ØC
X
ØB
E
D
Part No.
A
.563
14.29
.563
14.29
051-0134-0001
051-0158-0001
B Dia.
.375
9.53
.25
6.35
C Dia. ±.015
.309
7.85
.200
5.08
D
.172
4.37
.125
3.18
E
.031
.794
.047
1.19
X*
SOS-50, 70, 93
SOS-50, 70, 93
* “SOS” indicates Slide-On Series
Dimensions are subject to change without notice.
Single Hole Mount
Receptacles
A
D
.094
[2.38]
X
H
B
Hex.
C Thd.
Mounting Hole
E
F
Part No.
051-0249-0001
051-0154-0001
A
.563
14.29
.656
16.67
B Hex.
.375
9.53
.625
15.88
C Thd.
12-32
UNEF-2A
3/8-32
UNEF-2A
D
.078
1.98
.156
3.97
E
.109
2.78
.078
1.98
F
.234
5.95
.203
5.16
H
.218
5.54
.375
9.53
X*
S-50
S-93
* “S” indicates Screw-On Series
Dimensions are subject to change without notice.
2-147
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Appendix A - Theory and Application
Theory and Application
As a leading manufacturer of RF products, TE Connectivity
produces a large variety of coaxial connectors. The proper
selection and application of these connectors requires a
knowledge of factors not involved in other types of connectors
and terminals. The following paragraphs have been prepared
to improve understanding of the theory behind RF connectors:
Basic RF Theory1
RF energy travels by electromagnetic waves, and it is primarily the frequency of these waves that we are interested
in. Briefly, if an oscillating voltage source is connected to a
cable, a continuous electromagnetic wave will propagate
along the cable. A sensor placed at some point on the
cable would indicate a varying voltage (E field) as well as a
current and magnetic field (H field) as the wave travels past
it. This is called an electromagnetic wave because both
electric and magnetic fields are varying. The wave shape is
initially determined by the variation of the source with time.
Figure 7 shows the radiant energy spectrum. Visible light,
radio, television, x-rays and Gamma rays are all phenomenon of electromagnetic waves at different frequencies. This
introduction will treat only those that are generated by an
electrical source and propagated along a physical cable
or other transmission media. That is, frequencies above
zero and up to about 50 gigahertz.
In the following paragraphs we will discuss waves in greater
detail, including the relationship of frequency and wave length,
how pulses are formed and used, how each differs from the
other and the problems involved in their transmission.
Sine Waves
An RF wave is a sine wave, meaning that it smoothly swings
from zero to a positive peak value, then back down past
zero to a negative peak value, then back to zero to complete a 360 electrical degree cycle. The positive and negative peaks are always equal in amplitude. The two qualities
which characterize this type of wave are amplitude and frequency (f). Figure 8 shows these two characteristics.
Amplitude refers to the peak value attained by the wave and
corresponds to voltage. Frequency refers to the number of
oscillations per second. For example, the sign wave in
Figure 8(B) has completed 12 cycles in one second.
Therefore, we would say that this wave has a frequency of
12 cycles per second or 12 Hertz. The time for one complete cycle is defined as the period (T). The relationship
between the period and frequency is given by the equation:
f = 1 / T in Hertz
A
Peak
Positive
Amplitude
1The
majority of the technical terms, relative to RF and coaxial cable and
connectors, used here-in and throughout this catalog are defined in the
Glossary of Terms in Section 11.
Frequency or
Wavelengths
Designation
Applications
VLF
(Very Low
Frequency)
Commercial AC electricity, deep
depth sounders, ultrasonic
grinders, sonic oscillators
30 - 299.9
KHz
LF
(Low sonar
Frequency)
Shallow-to-medium depth sounders
300 - 2999.9
KHz
MF
(Medium
Frequency)
Commercial AM radio broadcasting,
marine radio telephone, direction
finders
3 - 29.9
MHz
HF
(High
Frequency)
Citizen band radio, amateur radio,
international broadcasting
0 - 29.9
KHz
30 - 299.9
MHz
VHF
(Very High
Frequency)
VHF television (Channels 2 thru
13), commercial FM radio
broadcasting, amateur radio, fire
and police radio
300 - 2999.9
MHz
UHF
(Ultra-high
Frequency)
UHF television (Channels 14 thru
83), microwave ovens, aeronautical
radionavigation
3 - 29.9
GHz
SHF
(Super High
Frequency)
Microwave communications, marine
radar, aircraft tracking and
airborne radars
30 - 299.9
GHz
EHF
(Extremely High
Frequency)
Space communications, radio
astronomy
Notes:
1. KHz = Kilohertz (1 thousand cycles per second)
2. MHz = Megahertz (1 million cycles per second)
3. GHz = Gigahertz (1 billion cycles per second)
Figure 7
Radiant Energy Spectrum
Peak
Negative
Amplitude
One Cycle
B
No. of Cycles
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
1 Second
Figure 8
Typical Sine Wave Characteristics
The wave travels away from the generator at speeds approaching the speed of light. When an electromagnetic wave travels in
a medium other than air or vacuum, the speed for the wave is
reduced by a factor of the square root of the dielectric constant
( ε. The velocity (v) of the propagation of a signal is given by:
c
__
v= ε
Where c is the speed of light, 3 x 108 m/sec or 1.18 x 1010
in/sec, and ε is the dielectric constant of the medium.
(See Table 1 for dielectric constants of various materials)
The wavelength of a signal is given by the formula
10
c
1.18 x 10 inches
__________
_________
λ = v/f =
ε x f (GHz)
ε x f (GHz)
See Figure 9
2-148
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Appendix A - Theory and Application (Continued)
Inches
1000
Notice that rise time is the time required for the pulse to
rise from 10% to 90% of its amplitude — not from zero to
maximum. Rise and fall time is perhaps the single most
important characteristic of a pulse in today’s high-speed
digital equipment. Figure 11 shows that the faster the rise
and fall time, the more pulses will fit in a given time frame.
A
10
2
RF Connectors
Wavelengths
100
1
0.1
Time
.001 GHz .01 GHz
.1 GHz
1 GHz
10 GHz
100 GHz
B
Frequency (MHZ)
(MHZ)
FREQUENCY
PTFE (E=2.03)
Figure 9
AIR (E=1.00)
Table 1.
Properties of Insulating Materials
Dielectric
Material
_________
TFE
Polyethylene
Nylon
TPX
Polypropylene
Acetal
Dielectric
Constant
_________
2.03
2.3
4.6-4.0
2.12
2.25
3.7
Operating
Temperature Range
__________________
-70 +250°C
-60 +80°C
-40 +120°C
-65 +85°C
-40 +105°C
-65 +85°C
Pulses
The sine wave is most often used for communication
purposes where intelligence is imposed on the wave by a
variation in amplitude (amplitude modulation, AM) or by a
variation in frequency (frequency modulation, FM).
Pulses, on the other hand, are primarily used in computers
and digital instrumentation. Since pulses are generally used
for triggering purposes, the pulse rise/fall time, amplitude
and width are the most important. Figure 10 shows a pulse
and identifies these characteristics.
Width
90%
90%
Amplitude
10%
10%
Fall Time
Repetition
Rate
Figure 10
Rise
Time
Time
Figure 11
Pulse Rise and Fall Time
The bit rate for a system is the maximum rate of pulses per
second that a system can process without causing data
errors. The maximum performance can also be specified in
terms of baud rate. The baud rate is defined as the number
of characters (bytes) that are transmitted per second.
Generally a character represents 10 bits (7 bits for the information, one parity bit, and two for start and stop, totalling 10).
Now that we know why fast pulses are required, the next
problem is how to obtain faster rise times. A pulse is made
up of a great number of different frequencies, and the more
high frequencies a pulse contains, the faster will be its rise
time and the flatter will be its peak. To better understand
this, refer to Figure 12. At A, you will see a fundamental frequency (1), its third harmonic (3), and the resultant waveform (S3), which is a combination of 1 and 3. Although this
does not yet resemble a square wave, you will note that
the rise time is decreased, and a dip appears at the peak.
At B of Figure 12, we have added the fifth harmonic. Rise
time is further decreased, and the peak is beginning to flatten out. At C the seventh harmonic has been included, and
the resultant wave S7 begins to resemble a square wave.
As more high frequency harmonics are added to the waveform, it will more closely resemble a square wave, and the
squarer it becomes, the faster will be the rise time.
Pulse Characteristics
2-149
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Appendix A - Theory and Application (Continued)
Fast rise times and short pulse widths require high frequency components.
Two frequent causes of digital signal degradation can be
(1) high capacitance of the transmission line and (2)
impedance mismatches of connector transmission line or
I/0 devices. Selection of an impedance-matched connector on a digital line, especially if short cable assemblies
are used, can be as important as connector selection for
an RF modulated line. Reflected pulses out of phase with
the original pulse can cause false signals or high error rates
in a digital system.
Signal Integrity and Propagation
To explain how to maintain signal integrity, it is necessary
to review how the signal is configured in a cable and how
it propagates. Ignoring digital signals for this discussion
we will identify the issues that deal with the integrity of a
sine wave. Consider a coaxial cable consisting of an inner
conductor surrounded by a dielectric material and then an
outer conductor (See Figure 13). The outer conductor may
be a braid, a foil, or a solid metal.
Since pulses with fast rise times are necessary in highspeed computers, any circuit element which could reduce
or attenuate high frequency response is undesirable.
Outer
Conductor
A
d
S3=1+3
D
1
Center
Conductor
Dielectric
Material
Figure 13
3
Diagram of a Cable
An electromagnetic wave traveling in a coaxial cable produces an electric and a magnetic field between the inner
conductor and the outer conductor (Figure 14). The electric
(E field) is radial and varies in time. An alternating current
flows along the inner conductor and the outer conductor. An
oscillating magnetic field (H field) circles the inner conductor.
S3
B
S5=1+3+5
H
E
V
5
Figure 14
S5
Electric field (E) and magnetic field (H)
belonging to the principal mode in a coaxial line.
C
The alternating current on a conductor is not spread throughout the conductor but is strongest at the surface and decays
exponentially at points further into the conductor. This is
called the skin effect. At a frequency of 1MHz, three skin
depths is 0.0078” (95% of the current is within three skin
depths of the surface) and at 10GHz three skin depths is
0.00078”. As a result, the current is on the outer surface of
the inner conductor and the inner surface of the outer conductor over the entire range of interest for most RF systems.
The dimensions and material beyond several skin depths
have no effect on the wave; gold plated plastic will propagate
as well as gold plated copper at sufficiently high frequencies.
S7=1+3+5+7
7
Figure 12
Development of a Square Wave
2-150
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Appendix A - Theory and Application (Continued)
Reflections
A wave loses energy (attenuates) in several ways: (1) The
resistance of the inner and outer conductors is small but
can be significant over long lengths and will produce some
heat. (2) The dielectric may be lossy; its resistance is high
but not infinite, and some energy is lost. (3) Electromagnetic
energy radiates at high frequencies; significant energy
losses are caused by radiation of electromagnetic energy
(the cable acts like an antenna). (4) Energy is reflected
due to impedance mismatches. The combination of these
four types of losses are referred to as the insertion loss of a
transmission line system. Connectors have similar losses.
When the characteristic impedance changes in a transmission line system, part of an incident wave is reflected. The
reflection coefficient can be calculated as:
ZR - ZO
Vi
Reflection Coefficient = ρ= _____ = _______
VR
ZR + ZO
Where Vi and ZO are the incident voltage and impedance
of the first media. VR and ZR represent the reflected voltage
and impedance of the media that caused the reflection.
The decibel loss due to reflection is given by:
Characteristic Impedance
A parameter which defines the behavior of a cable,
connector, or any propagating system is Characteristic
Impedance, Zo. The characteristic impedance of a lossless cable is related to the inductance per unit length, L,
and the capacitance per unit length, C, as follows:
Zo =
L/C in ohms
The equivalent circuit of a transmission line is shown in Figure
15. R represents the conductor resistance for a unit length.
For a coaxial cable the characteristic impedance is given by:
D
Zo = 138 x Log10
ε
d
in ohms
where D is the inner diameter of the outer conductor and
d is the outer diameter of the inner conductor, respectively.
Similar equations apply for other geometries such as two
parallel wires.
2
RF Connectors
Attenuation
1
Return Loss = 10 Log10 ( ____ ) dB
1-ρ 2
VSWR
The traditional way to determine the
reflection coefficient is to measure
the standing wave caused by the
superposition of the incident wave
and the reflected wave. Traditionally
the voltage is measured at a series
of points using a slotted line. The
ratio of the maximum divided by the
minimum is the Voltage Standing
Wave Ratio (VSWR). The VSWR is
infinite for total reflections because
the minimum voltage is zero. If no
reflection occurs the VSWR is 1.0.
VSWR and reflection coefficient are
related as follows:
VSWR = (1 + ρ)/(1 - ρ)
L
R
Most present instrumentation
measures the reflection coefficient
and calculates the VSWR.
C
Z0
Figure 16 represents the direct
relationship between VSWR and its
equivalent in return loss
(expressed in dB).
Figure 15
Typical Transmission Line Schematic
The maximum power is transferred between two systems if
they have the same impedance. This is called impedance
matching. However, impedance variations that are short
compared to a wavelength can have a negligible effect on
signal loss.
Standard impedances are 50 ohm, 75 ohm and 93-125
ohm. Most systems use 50 ohm because it is a compromise between maximum power transmission and minimum
line loss. The telephone industry and the broadcast industry use 75 ohm for minimum line attenuation. The need for
low capacitance instrumentation cable has produced the
93-125 ohm systems. The higher impedances are generally
achieved by changing the conductor diameters and by
modifying the dielectric material to add air.
Figure 16
VSWR vs. Return Loss
Multiple Reflections
If there is a series of impedance changes, each one will
have a reflection coefficient. The total reflection coefficient
is the vector addition of each of the individual coefficients
accounting for the distance between reflections and the
reflection of any reflected waves. Even though the calculations are difficult, a total VSWR can still be measured.
Multiple reflections can produce a resonance phenomenon
that is unique to wave theory. Properly understood some serious difficulties can be avoided. An example will make the
point clear. Consider an electromagnetic wave with a wave2-151
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Appendix A - Theory and Application (Continued)
length of 4 inches traveling on a cable that changes from 50
ohms to 25 ohms. The reflection coefficient is -.33, which
means that one third of the incident voltage is reflected
toward the source. Assume that one inch (one quarter wavelength) down the cable the impedance changes back to 50
ohm. Again, one third of the wave is reflected, but without
any phase shift. It travels back to the first interface where one
third of this reflected wave is reflected back toward the second interface. Two thirds of the wave is transmitted through
the interface and travels back to the source. Since the first
(reflected) wave is shifted 180 degrees at the reflection, and
the second (transmitted-reflected-transmitted) wave is shifted
180 degrees because it traveled the one inch separation
twice, the two waves are in phase. The net result is that the
VSWR is much larger because the length of the 25 ohm section was just the right length to cause a resonance. If the
length of the 25 ohm section had been one half wavelength, the two waves would have interfered and the VSWR
would be at a minimum.
λ/
4
V in
50 Ω
25 Ω
50 Ω
V out
λ/
4
.66V
1 V out
.44V
.33V
Reflections of Digital Signals
The previous discussions dealing with attenuation,
reflections and standing waves can apply to digital signals
with some extra thought.
A single pulse can be thought of as a combination of high
frequency sine waves. The maximum frequency component
in a square wave pulse can be calculated by this equation:
f = 0.35/rise time
where
f = GHz when “t” is in nanoseconds
Attenuation of the frequencies necessary to support the short
risetime will produce a slower rise and possibly prohibit the
pulse from ever reaching the detector. This ‘slurring’ of the
pulse is similar to the behavior of an RC circuit and the
attenuation is sometimes called capacitive attenuation.
A series of pulses can demonstrate resonance. If a portion of
a pulse is reflected at each interface, it is possible for them to
come together and add up to form a new phantom pulse.
The critical frequency here is the bit rate. Think of a sine
wave with a frequency the same as the bit rate; if it will
resonate in the cable, the pulses will also. Extra pulses
caused by resonance might easily result in an error signal
from the receiving system requesting a retransmittal. The
final result would be a communication system that is much
slower than intended.
Cut-off Frequency
The cut-off frequency of a coaxial transmission line is the
frequency at which modes of energy transmission, other
than the “TEM” mode, can be generated.
.22V
.07V
7.5
7.5
fco =
= ______ (in
fco
(in GHz)
GHz)
ε (D+d)
ε (D+d)
.15V
(D and d are measured in inches)
Impedance
Mismatch
V in = 1 Volt VR =.48 Volt
Types of Transmission Lines
V out =.52 Volt
Figure 17
Multiple Wave Reflections
(Caused by Impedance Mismatch)
In summary, avoid cable lengths, printed circuit board paths,
or connectors that are multiple of one quarter (λ/4, 3λ/4, etc.)
of the intended signal transmission wavelength. Coaxial
cables, when manufactured, also have periodic variations in
diameter that result in periodic changes in impedance (Zo),
that can cause significant levels of reflected signal (high
return loss) at specific frequencies.
Twin Lead transmission cable is generally used where
impedance matching alone is important, since it provides
only minimal shielding. Impedance values of 300 ohms and
600 ohms are common. Lower impedance values require
closer spacing of the conductors and are not normally available in this type of cable. A typical application for twin lead
cable is in antenna lead wire for television sets.
Twisted Pair is a variation of the twin lead type. It consists
of two lengths of ordinary hookup wire twisted together. A
twisted pair provides relatively constant impedance plus
better magnetic shielding than twin lead cables. It is flexible, inexpensive, easy to terminate and is used extensively
by the computer industry. However, it should not be used
when maximum shielding is required.
2-152
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Appendix A - Theory and Application (Continued)
Shielded Twisted Pair Cable is used to eliminate inductive
and capacitive coupling. Twisting cancels out inductive
coupling, while the shield eliminates capacitive coupling.
Most applications for this cable are between equipment,
racks and buildings.
Triaxial Cable is used when higher “shielding” efficiency
characteristics are required in applications similar to those
using shielded twisted pair cable.
Signal
Conductors
Outer Conductor
Insulation
Outer Conductor
Dielectric
Dielectric
2
Ribbon Coaxial Cable is a relatively recent TE innovation
which combines the advantages of both ribbon cable and
coaxial cable. TE currently provides both the cable and the
insulation displacing coaxial connector to terminate the
cable. Each individual coaxial cable consists of the signal
conductor, dielectric, a foil shield and a drain wire which is
in continuous contact with the foil. The entire assembly is
then covered with an outer insulating jacket. The unique
manufacturing feature of this cable is the precise placement of the drain wires to permit gang stripping of the
outer jacket and foil. The major advantage of this cable is
the speed and ease with which it can be mass terminated
with the TE insulation displacement technique. They can
also be separated into individual coaxial lines and terminated with standard coaxial connectors
as required.
Middle Conductor
Dielectric
Insulation
Signal
Conductors
Semi-rigid Coaxial Cable uses a solid tubular outer
conductor rather than the braided type, so that all the RF
energy is contained within the cable. One of the drawbacks of braided cable is that the shielding is not 100%
effective, especially at higher frequencies. This is because
the braided construction can permit small amounts of short
wavelength (high frequency) energy to radiate. Normally
this does not present a problem; however, if a higher
degree of shielding is required, semi-rigid coaxial cable is
recommended. For applications using frequencies higher
than 30 GHz a miniature semi-rigid cable is recommended.
Various connectors are available from TE to terminate
these cables.
RF Connectors
Flexible (Braided) Coaxial Cable is by far the most
common type of closed transmission line because of its
flexibility. It is a coaxial cable, meaning that both the signal
and the ground conductors are on the same center axis.
The outer conductor is made from fine braided wire, hence
the name “braided coaxial cable”. This type of cable is
used in practically all applications requiring complete
shielding of the center conductor. The effectiveness of the
shielding depends upon the weave of the braid and the
number of braid layers. TE Connectivity manufacturers connectors for cable sizes ranging from less than 1/8 in. diameter, for low power applications of around 50 watts, to over
1/2 in. diameter for power of 850 watts at 100 MHz and voltages up to 5000. In addition to power handling capabilities,
cables are available for high frequency applications, high
and low temperature applications, severe environmental
applications and many other specialized uses.
Often you will hear the term “shielded cable”. This is very
similar to coaxial cable except the spacing between center
conductor and shield is not carefully controlled during manufacture, resulting in non-constant impedance.
Figure 18
Twin Conductor and Triaxial Cable
-1000
9
8
7
6
5
4
lid
So
th
ea
Sh
-300
-200
Triax
-100
-80
-60
-40
Double Braid
Single Copper Braid
-30
-20
-10
.01 GHz
1 GHz
.1 GHz
10 GHz
Figure 19
Shielding Efficiencies
2-153
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
METRIC
Dimensions are millimeters over inches
RF Connectors
Appendix B - Typical Coaxial Cable Specifications
Abbreviations
SCCad Br......Silver covered cadmium bronze
GS.................Galvanized steel
TCCS ............Tin copper covered steel
SSC ..............Silver covered strip
HR.................High resistance wire
SA .................Silver covered alloy
Dielectric
PE .................Solid polyethylene
PTEE .............Solid polytetrafluoroethylene
PIB ................Polyisobutylene, Type B, per MIL-C-17
Rubber ..........Per MIL-C-17D
Sil .................Silicone rubber
PS .................Polystyrene
Jacket Material
PVC-I ............Black polyvinylchloride, contaminating, Type I, per MIL-C-17D
PVC-II ...........Gray polyvinylchloride, noncontaminating, Type II, per MIL-C-17D
PVC-IIA.........Black polyvinylchloride, noncontaminating, Type IIA, per MIL-C-17D
PE-III.............Clear polyethylene
PE-IIIA ..........High molecular weight, black polyethylene, Type IIIA, per MIL-C-17D
FG Braid V ....Fiberglass, impregnated, Type V, per MIL-C-17D
FEP-IX ..........Fluorinated ethylene propylene, Type IX, per MIL-C-17D
PUR ..............Polyurethane, black specific compounds
SIL/DAC-VI...Dacron braid over silicone rubber, Type VI, per MIL-C-17D
Rubber ..........Per MIL-C-17D
Conductors and Braid Materials
AL .................Aluminum
SCAAI ...........Silver covered copper covered aluminum
BC.................Bare copper
SC.................Silver covered copper
CCS ..............Copper covered steel
TC .................Tinned copper
SCCS ............Silver covered copper covered steel
RG/U
Type
Cable
8
8A
9
9A
9B
11
11A
55
55A
55B
58
58A
58B
58C
59
59A
59B
Inner
Conductor
2.17
.0855
7/0.72 BC
.0285
2.17
.0855
7/0.72 BC
.0285
2.17
.0855
7/0.72 SC
.0285
2.17
.0855
7/0.72 SC
.0285
2.17
.0855
7/0.72 SC
.0285
1.21
.0477
7/0.4 TC
.0159
1.21
.0477
7/0.4 TC
.0159
0.81 BC
.0320
.0.89 SC
.0350
0.81 SC
.0320
0.81 BC
.0320
0.9
.0355
0.81 BC
.0320
0.9
.0355
19/0.8 TC
.0071
0.64 CCS
.0253
0.64 CCS
.0253
0.58 CCS
.0230
Dielectric
Material
DOD
Number/Type
of Shielding
Braids
Jacket
Material
O.D.
Weight
(lb/ft)
Nom.
Imped.
(Ohms)
Nom.
Cap
pf/ft
Max.
Operating
Temp. (C°)
Max.
Operating
Voltage
(Volts RMS)
Comments
PE
7.24
.285
1/BC
PVC-I
10.29
.405
.106
52
29.5
⫺40 ⫹80
4000
Use RG213
PE
7.24
.285
.285
1/BC
PVC-IIA
10.29
.405
.106
52
29.5
⫺40 ⫹80
5000
Use RG213
PE
7.11
.280
2/Inner SC
Outer BC
PVC-II
10.67
.420
.140
51
30.0
⫺40 ⫹80
4000
Use RG214
PE
7.11
.280
2/SC
PVC-II
10.67
.420
.140
51
30.0
⫺40 ⫹80
4000
Use RG214
PE
7.11
.280
2/SC
PVC-IIA
10.67
.420
.150
50
30.8
⫺40 ⫹80
5000
Use RG214
PE
7.24
.285
1/BC
PVC-I
10.29
.405
.096
75
20.6
⫺40 ⫹80
4000
Use up to
100 MHz
PE
7.24
.285
1/BC
PVC-IIA
10.29
.405
.096
75
20.6
⫺40 ⫹80
5000
Use up to
1000 Mhz
PE
2/TC
PE-III
53.5
28.5
⫺55 ⫹80
1900
Use RG55B
2/SC
PVC-IIA
.034
50
30.8
⫺40 ⫹80
1900
2/TC
PE-IIIA
.033
53.5
28.5
⫺55 ⫹80
1900
Use RG223
Use up to
1000 MHz
1/TC
PVC-I
.029
53.5
28.5
⫺40 ⫹80
1900
Use RG58B
1/TC
PVC-I
.029
52
28.5
⫺40 ⫹80
1900
1/TC
PVC-IIA
5.08
.200
5.08
.200
5.08
.200
4.95
.195
4.95
.195
4.95
.195
.032
PE
2.95
.116
2.95
.116
2.95
.116
2.95
.116
2.95
.116
2.95
.116
.029
53.5
28.5
⫺40 ⫹80
1900
Use RG58C
Use up to
1000 MHz
PE
2.95
.116
1/TC
PVC-IIA
4.95
.195
.029
50
30.8
⫺40 ⫹80
1900
Extra Flexible
Version RG58B
PE
3.71
.146
3.71
.146
3.71
.146
1/BC
PVC-I
.032
73
21.0
⫺40 ⫹80
2300
Use RG59B
1/BC
PVC-IIA
.032
73
21.0
⫺40 ⫹80
2300
1/BC
PVC-IIA
6.15
.242
6.15
.242
6.15
.242
.032
75
20.6
⫺40 ⫹80
2300
Use RG59B
Use up to
1000 MHz
PE
PE
PE
PE
PE
PE
2-154
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
METRIC
Dimensions are millimeters over inches
RF Connectors
Appendix B - Typical Coaxial Cable Specifications (Continued)
RG/U
Type
Cable
62A
62B
71
71B
122
124
140
141
141A
142
142A
142B
174
178
178B
179
180B
188
188A
195A
210
213
214
Dielectric
Material
DOD
Number/Type
of Shielding
Braids
Jacket
Material
0.64 CCS
.0253
0.61
.0240
7/0.2 CCS
.0080
0.64 CCS
.0253
0.64 CCS
.0253
0.64 CCS
.0253
0.76
.0300
7/0.13 TC
.0050
0.64 TCCS
.0253
0.64 SCCS
.0250
0.91 SCCS
.0359
0.99 SCCS
.0390
0.91 SCCS
.0359
0.99 SCCS
.0390
0.99 SCCS
.0390
0.48
.0189
7/0.16 CCS
.0063
0.3
.0120
7/0.1 SCCS
.0040
0.3
.0120
7/0.1 SCCS
.0040
0.3
.0120
7/0.1 SCCS
.0040
0.3
.0120
7/0.1 SCCS
.0040
0.51
.0201
7/0.17 SCCS
.0067
0.51
.0201
7/0.17 SCCS
.0067
0.3
.0120
7/0.1 SCCS
.004
0.64 SCCS
.0253
2.26
.0888
7/0.75 BC
.0296
2.26
.0888
7/0.75 SC
.0296
Air-space
PE
3.71
.146
1/BC
PVC-IIA
6.15
.242
Air-space
PE
3.71
.146
1/BC
PVC-IIA
6.15
.242
Air-space
PE
Air-space
PE
Air-space
PE
3.71
.146
3.71
.146
3.71
.146
2/TC
PVC-I
2/TC
PE-III
2/TC
PE-IIIA
PE
2.44
.096
1/TC
PVC-IIA
1/TC
FG
Braid-V
Taped
PTFE
1/SC
FG Braid-V
2/SC
FG Braid-V
2/SC
FG
PTFE
3.43
.135
3.71
1.46
2.95
.116
2.95
.116
2.95
.116
2.95
.116
2.95
.116
2/SC
PE
1.52
.060
PTFE
Nom.
Imped.
(Ohms)
Nom.
Cap
pf/ft
Max.
Operating
Temp. (C°)
Max.
Operating
Voltage
(Volts RMS)
Comments
.038
93
13.5
⫺40 ⫹80
750
Low
Capacitance
.038
93
13.5
⫺40 ⫹80
750
Extra Flexible
RG62A
O.D. Weight
(lb/ft)
6.22
.245
6.22
.245
6.22
.245
.046
93
13.5
⫺40 ⫹80
750
Use RG71B
.046
93
13.5
⫺55 ⫹80
750
Use RG71B
.046
93
13.5
⫺55 ⫹80
750
Low
Capacitance
4.06
.160
.016
50
29.4
⫺40 ⫹80
1900
Use up to
1000 MHz
.210
73
20.3
⫺55 ⫹250
2300
Use RG140
See RG302 for
FEP Jacket
.036
50
29.4
.047
50
.047
FEP
6.1
.240
5.92
.233
4.83
.190
4.83
.190
4.95
.195
4.95
.195
4.95
.195
1/TC
PVC
0.91
.036
1/SC
PTFE
0.86
.034
PTFE
.056
75
19.5
⫺55 ⫹250
2300
.036
50
29.4
⫺55 ⫹250
1900
Use RG141A
⫺55 ⫹250
1900
See RG303 for
FEP Jacket
29.4
⫺55 ⫹250
1900
Use RG142A
50
29.4
⫺50 ⫹250
1900
.047
50
29.4
⫺55 ⫹250
1900
See RG142B for
FEP Jacket
Standard Center
Cond. Available
2.54
.100
.008
50
30.8
⫺40 ⫹80
1500
Miniature Data
Transmission
KEL-F
1.83
.072
.0054
50
29.4
⫺40 ⫹150
1000
Use RG178B
1/SC
FEP-IX
1.83
.072
.0054
50
29.4
⫺55 ⫹200
1000
High Strength
Cond. Available
1.45
.057
1/SC
KEL-F
2.54
.100
.010
70
20.4
⫺55 ⫹150
1200
Use RG179B
PTFE
2.59
.102
1/SC
KEP-IX
3.56
.140
.019
95
15.4
⫺55 ⫹200
1500
High Strength
Cond. Available
PTFE
1.52
.060
1/SC
PTFE
2.67
.105
.011
50
29.4
⫺55 ⫹250
1200
Use RG316
PTFE
1.52
.060
1/SC
PTFE
2.67
.105
.011
50
29.4
⫺55 ⫹250
1200
Use RG316
PTFE
2.59
.102
1/SC
PTFE
3.68
.145
.020
95
15.4
⫺55 ⫹250
1500
Use RG180B
Air-Space
PTFE
3.71
.146
1/SC
FG Braid-V
6.15
.242
.040
93
13.5
⫺55 ⫹250
750
High Temp.
Low Capacitance
PE
7.24
.285
1/BC
PVC-IIA
10.29
.405
.099
50
30.8
⫺40 ⫹80
5000
Use up to
1000 MHz
PE
7.24
.285
2/SC
PVC-IIA
10.0
.425
.126
50
30.8
⫺40 ⫹80
5000
Use up to
10,000 MHz
PTFE
PTFE
PTFE
PTFE
PTFE
1/SC
FG Braid-V
1/SC
FG Braid-V
2
RF Connectors
71A
Inner
Conductor
2-155
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
METRIC
Dimensions are millimeters over inches
RF Connectors
Appendix B - Typical Coaxial Cable Specifications (Continued)
RG/U
Type
Cable
216
223
225
302
303
316
400
Inner
Conductor
1.21
.0477
7/0.75 BC
.0159
0.89 SC
.035
2.38
.0936
7/0.79 SC
.0312
0.64 SCCS
.0250
0.99 SCCS
.0390
0.51
.0201
7/0.17 SCCS
.0067
0.98
.0385
19/0.2 SPC
.0077
Nom.
Imped.
(Ohms)
Nom.
Cap
pf/ft
Max.
Operating
Temp. (C°)
Max.
Operating
Voltage
(Volts RMS)
Comments
.114
75
20.6
⫺40 ⫹80
5000
Use up to
1000 MHz
5.36
.211
.034
50
30.8
⫺40 ⫹80
1900
Use up to
10,000 MHz
10.92
.430
.180
50
29.4
⫺55 ⫹250
5000
See RG393 for
FEP Jacket
.030
75
19.5
⫺55 ⫹200
2300
.088
50
29.4
⫺55 ⫹200
1900
Dielectric
Material
DOD
Number/Type
of Shielding
Braids
Jacket
Material
PE
7.24
.285
2/BC
PVC-IIA
10.8
.425
PE
2.95
.116
2/SC
PVC-IIA
PTFE
7.24
.285
2/SC
FG Braid-V
1/SC
FEP-IX
1/SC
FEP-IX
PTFE
PTFE
3.71
.146
2.95
.116
O.D. Weight
(lb/ft)
5.11
.201
4.32
.170
FEP Jacketed
RG140
FEP Jacketed
RG141A
PTFE
1.52
.060
1/SC
FEDP-IX
2.59
.102
.012
50
29.4
⫺55 ⫹200
1200
FEP Jacketed
RG188A
PTFE
2.95
.116
2/SC
FEP-IX
4.95
.195
.050
50
29.3
⫺55 ⫹200
1900
—
3.58 OD
.141
Copper Tube
2.18 OD
.086
Copper Tube
None
3.58
.141
.032
50
29.3
⫺40 ⫹125
2500
Semi-rigid
None
2.19
.0865
.015
50
29.4
⫺40 ⫹125
1500
Semi-rigid
402
0.91 SCCS
.0360
PTFE
3.02
.119
405
0.51 SCCS
.0201
PTFE
1.68
.066
2-156
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Appendix C - Maximum Power Handling Capabilities for Cables
Average Input Power in Watts
RG/U
Type Cable
50
800
1,300
1,300
1,000
2,000
650
310
280
225
480
480
420
9,500
145
205
3,500
4,600
9,500
780
72
340
1,100
600
3,300
100
550
850
850
650
1,200
430
205
180
170
310
310
280
6,300
100
140
2,400
3,200
6,300
570
50
240
800
450
2,300
200
350
540
540
400
800
280
137
125
110
200
200
180
4,300
70
90
1,600
2,100
4,300
420
36
170
570
330
1,600
Frequency in MHz
400
230
350
350
260
480
190
90
85
75
135
135
120
2,800
50
60
1,100
1,450
2,800
310
25
123
400
240
1,100
1,000
125
190
190
150
260
110
53
50
44
77
77
69
1,700
30
35
650
850
1,700
200
16
78
250
160
620
3,000
60
95
95
70
120
50
28
25
22
40
40
35
880
15
18
350
460
880
110
—
41
135
80
310
5,000
40
65
65
50
85
38
20
17
15
27
27
25
620
—
12
245
330
620
76
—
28
93
57
220
10,000
22
37
37
26
50
20
10
—
—
15
15
14
350
—
—
140
190
350
41
—
14
50
30
140
2
RF Connectors
5, 5A, 5B
8, 8A, 10A, 213, 215
9, 9A, 9B, 214
11, 11A, 12, 12A, 13, 13A, 216
217
22, 22B
55, 55A, 55B, 223
58, 58B
58A, 58C
59, 59A, 59B
62, 62A, 71, 71A, 71B
62B
115, 115A, 165, 225, 393
108, 108A
122
140, 141, 141A, 142, 142B, 302, 303, 400, 402
143, 143A
144
161, 179, 179A, 179B, 187, 187A
174, 174A
178, 178A, 178B, 196, 196A
180, 180A, 180B, 195, 195A
188, 188A, 316
210
10
2,000
3,700
3,700
2,500
6,000
1,700
800
730
650
1,300
1,300
1,150
25,000
340
540
9,000
11,500
25,000
1,600
170
710
2,500
1,250
8,500
Note: Values above 3 GHz vary considerably depending on construction.
Conditions:
Ambient — 104°F [40°C]
Altitude — Sea level
Center Conductor Temperature — 176°F [80°C] for polyethylene, 392°F [200°C] for PTFE
2-157
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
RF Connectors
Appendix D - Nominal Loss Characteristics for Cables
Decibels per Hundred Feet
RG/U
Type Cable
5, 5A, 5B
8, 8A, 10A, 213, 215
9, 9A, 9B, 214
11, 11A, 12, 12A, 13, 13A, 216
217
22, 22B
55, 55A, 55B, 223
58, 58B
58A, 58C
59, 59A, 59B
62, 62A, 71, 71A, 71B
62B
115, 115A, 165, 225, 393
108, 108A
122
140, 141, 141A, 142, 142B, 302, 303, 400, 402
143, 143A
144
161, 179, 179A, 179B, 187, 187A
174, 174A
178, 178A, 178B, 196, 196A
180, 180A, 180B, 195, 195A
188, 188A, 316
210
10
.80
.66
.66
.66
.41
1.20
1.35
1.20
1.40
1.10
.90
.90
.60
2.30
1.60
1.20
.85
.38
5.00
3.80
5.30
3.10
3.80
.23
50
1.40
1.50
1.50
1.50
1.00
2.80
3.00
3.10
3.30
2.30
1.90
2.10
1.40
5.20
4.40
2.70
1.80
1.00
7.90
6.50
10.00
4.20
7.90
.58
100
2.90
2.20
2.20
2.20
1.40
4.20
4.30
4.60
4.90
3.30
2.80
3.00
2.10
7.50
6.90
3.90
2.50
1.60
9.80
8.90
13.30
5.10
11.50
.85
200
4.30
3.20
3.20
3.20
2.10
6.30
6.00
7.00
7.30
4.70
3.70
4.30
3.10
11.00
11.00
5.50
3.80
2.30
12.70
12.00
20.00
7.30
15.00
1.30
Frequency in MHz
400
6.40
4.60
4.60
4.60
3.10
9.50
8.80
10.00
11.00
6.70
5.20
6.10
4.50
16.00
16.60
8.00
5.70
3.80
15.80
17.50
27.50
10.40
20.00
1.90
1,000
11.00
9.00
9.00
9.00
5.80
—
16.50
17.50
20.00
11.50
8.50
10.50
7.50
26.20
29.20
13.00
9.70
7.00
25.00
31.00
45.00
16.50
30.00
3.10
3,000
22.00
19.00
19.00
19.00
13.00
—
36.00
38.00
41.00
25.50
18.40
23.50
14.00
54.00
57.20
26.00
18.10
15.10
43.00
64.30
78.00
36.00
58.00
6.50
5,000
30.00
28.00
28.00
28.00
19.00
—
51.00
—
—
41.00
29.50
36.00
21.00
—
89.00
36.00
26.10
—
62.50
97.00
115.00
49.50
79.00
9.00
10,000
52.00
47.00
47.00
—
31.00
—
85.00
—
—
—
—
—
35.00
—
—
62.00
40.70
—
135.00
185.00
172.00
89.00
133.00
15.00
Note: Values above 3 GHz vary considerably depending on construction.
Conditions
Ambient —68°F [20°C]
2-158
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2 to 3-3
Expanded Beam Products
MIL Qualified Connectors (MIL-DTL-83526) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4
Pro Beam Mini Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5 to 3-7
Pro Beam Jr. Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-8 to 3-11
Pro Beam Sr. Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-12, 3-13
38999 Series III Style Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-14 to 3-16
Expanded Beam Contact (Size 16) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-17
Cable Assemblies and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-18 to 3-19
Cables
Reels
Backpacks
Tactical Optical Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-20
Commercial Fiber Optic Mechanical Splice Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-21
Optical Test Set for Fiber Optic Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-22
Hand Held Fault Locator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-23
Expanded Beam Avionics-Related Standards and Specifications . . . . . . . . . . . . . . . .3-24
ARINC 600 and 404 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-25 to 3-28
Physical Contact & Technology
ARINC 801 Optical Termini . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-29 to 3-30
F12 ARINC 801 Insert Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-31
ARINC 801 Optical Termini Adapter Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-32
ARINC 801 Optical Termini Termination Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-33
MIL-T-29504 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-34
Optical Inserts for EN4165 and ARINC 809 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-34
Fiber Optic Insert for DMC-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-34
RSC-v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-34
Rugged Circular Connectors
38999 Style Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-35
MC3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-36 to 3-39
MC4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-40 to 3-41
MC5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-42 to 3-45
MC6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-46 to 3-48
MC801 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-49
Ruggedized Singleway Connector (RSC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-50 to 3-52
Sealed Circular LC ODVA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-53
Empire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-54
Rugged Board Level Connectors
Ruggedized Optical Backplane Interconnect for VITA 66.1 . . . . . . . . . . . . . . . . . . . . . .3-55
Navy CID Approved - Epoxy Applied
Tight Jacketed LC Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-56
Tight Jacketed SC Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-57
LightCrimp Plus Navy Approved
LC, SC and LightCrimp Plus ST Approved by US Navy . . . . . . . . . . . . . . . . . . . . . . . .3-58
Combination LightCrfimp Plus Termination Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-59
LightCrimp Splice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-60
Offshore Optical Connectors and Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . .3-61
3
Ruggedized Fiber Optic Connectors
3-1
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Ruggedized Fiber Optic Products
Product Facts
TE Connectivity (TE) is proud to offer a full rugged fiberoptic product family.
Expanded Beam
■ PRO BEAM Sr.Connectors
■ PRO BEAM Jr.Connectors
■ PRO BEAM Mini
Connectors
■ Mini 38999
■ Mini ARINC
■ Mini GPRC
■ Size 16 M29504 EB/4 and
/5 varieties
Physical Contact Technology
With TE’s complete selection that includes world class Physical Contact and Expanded
Beam technologies that include MC series of high density contact, a Rugged Single
Channel and MT ribbon fiber as well as global industry standards of EN4165 and ARINC
801 along with our M83526/20 and /21 qualified products and wide variety of Expanded
Beam technologies the end user is guaranteed a complete choice that meets their cost
and optical performance needs in multiple industries.
■
■
ARINC 801 MM and SM
■
M29504 /4 and /5 MM and SM
■
MC Series
■ MC3
■ MC3
■ MC5
■ MC6
■ MC801
For specific information, please contact your local TE Sales Representative.
ARINC 801 Optical Termini
■
Rugged Single Channel (RSC)
■
Sealed Circular LC ODVA
Conforming Connector
Expanded Beam Products
MC5 (JN1130) multiway connectors
EN4165 derivatives
MC4
MC3 (JN1146) multiway connectors
MIL-T-29504
RSC (JN1148) single way connector
MC6
3-2
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Ruggedized Fiber Optic Products (Continued)
Expanded Beam Products
Product Facts
■
PRO BEAM Sr., PRO BEAM
Jr. and PRO BEAM Mini
Connector field deployable
interconnects
■
ARINC 600 connectors, with
inserts/holder blocks
designed for Mini Expanded
Beam — up to 128 channels
on size 3 ARINC 600
■
■
Unique Modular Design,
for use with multimode and
singlemode fiber
■
Tactical cables, cable reels,
backpacks
■
Cable assembly and
termination services
■
Ball lens expands crosssectional area of light over
200 times for multimode
and over 2000 times for
singlemode
■
Rugged hermaphroditic
construction (i.e., same
insert mates to each other)
■
Physically non-contacting
mating conditions; no wear,
installed fiber ferrule
protected by ball lens
From left to right: PRO BEAM Sr.,
PRO BEAM Jr. & Mini Expanded
Beam inserts.
Expanded Beam Principle
Applications
Fiber Optic Interconnect/
Cable System using
Expanded Beam technology,
which physically expands
and collimates the transmission signal into an optical
beam over 14 times its
original diameter (the cross
sectional area of the light
beam increases over 200
times for multimode optical
signals). For singlemode
signals, the collimated
beam is over 45 times its
original diameter (the crosssectional area of the light
beam increases over 2,000
times.). It is then refocused
back down onto the core of
the receiving fiber. This
approach provides ease
of alignment and low
sensitivity to thermal
changes and contamination.
High strength, precision connector housings enhance
a durable connection,
optimizing low loss and
repeatable performance.
Product Facts
EB termini
Expanded Beam Inserts
Key Features
■
No wear on fiber optic
interface; Very vibration
resistant
■
Easy to handle, easy to
clean. Durable connection
that is highly resistant to
dirt/debris
■
Singlemode or multimode
■
Common 850/1300 Dual
Wavelength, 1310, or
1550 nm wavelengths
■
Durable non-contacting
interface assures ease of
use/cleaning
■
Easy alignment for low-loss,
repeatable performance
■
Termini designed to replace
existing M29504/4 and /5
physical contact termini that
fits the Size 16 AWG cavity
of a D389999 III connector
■
Consistent overall optical
“link budget” assured
■
Low sensitivity to thermal
fluctuations and interface
contamination
■
Repeatable low-loss
performance in harsh
environments
■
3
Ruggedized Fiber Optic Connectors
MIL-C-38999 Series III
shell size 11 and 15 style
circular connectors — Cable
assemblies up to 8 fibers
Expanded Beam Technology
Suitable for field-deployable
communications, marine
ship-to-shore applications,
security systems, mobile
diagnostic units, oil and
gas exploration and other
harsh environment applications demanding strength,
durability and reliable
performance in conditions
of multiple coupling/
decouplings, blindmate
situations, and high vibration.
■
PRO BEAM Sr. Insert —
the original, larger format,
Field Tactical, hermaphroditic
Connector System
■
PRO BEAM Jr. Insert —
the second generation,
reduced size, Field Tactical
Connector System — a
TE Connectivity original
design
■
Mini Expanded Beam
Insert for multi-channel
small form factor — the
smallest expanded beam
multi-channel insert in the
industry, another TE
Connectivity original design
MM and SM termini designs
3-3
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Expanded Beam Products
MIL-Qualified Connectors
M83526/20 and M83526/21
The original now has a MIL-qualified
version. The benchmark PRO BEAM Jr.
connector series was the model for the
MIL-DTL-83526/20 and /21 specifications. TE is now the first to gain full
qualification to these specifications
with TE’s M83526/20 and M83526/21
connectors.
Product Facts
■
MIL-qualified to MIL-DTL83526/20B and MIL-DTL83526/21B
■
QPD- (Qualified Products
Database) listed on
http://qpldocs.dla.mil/
■
VG-approval to VG 95319100 and -101
■
Fully intermateable and
interoperable with the
benchmark PRO BEAM Jr.
connector series
■
TE’s patented InterferenceFit expanded beam design
technology yields
unmatched high
performance and high
reliability
TECHNICAL DOCUMENTS
408-32093 M83526/20 Plug
408-32107 M83526/21
Bulkhead
http://te.com/documents
Mil-DTL-83526/20B
Mil-DTL-83526/21B
http://quicksearch.dla.mil
MIL-DTL-83526 Connector Assembly Part Numbers
P/N
M83526/20-01
M83526/20-02
M83526/20-03
M83526/20-04
M83526/20-05
M83526/20-06
M83526/21-01
M83526/21-02
M83526/21-03
M83526/21-04
M83526/21-05
M83526/21-06
Part Number
2064556-1
2064557-1
2064558-1
2064559-1
2064560-1
2064561-1
2064562-1
2064563-1
2064564-1
2064565-1
2064566-1
2064567-1
Description
4 x 850/1300 MM Plug
4 x 1310 SM Plug
4 x 1550 SM Plug
2 x 850/1300 MM Plug
2 x 1310 SM Plug
2 x 1550 SM Plug
4 x 850/1300 MM Bulkhead
4 x 1310 SM Bulkhead
4 x 1550 SM Bulkhead
2 x 850/1300 MM Bulkhead
2 x 1310 SM Bulkhead
2 x 1550 SM Bulkhead
VG numbers assigned as
reference docs. Mil spec detail
sheets will be formal guidance
for orders
MIL-DTL-83426/20 = VG 95319-100
MIL-DTL-83426/21 = VG 95319-101
MFOCA - Mixed Mode
P/N
1516546-1
1516547-1
1516548-1
1516702-1
1516703-1
1516704-1
DLA P/N
10023-03
10023-01
10023-02
10024-03
10024-01
10024-02
Type
Plug
Plug
Plug
Bulkhead
Bulkhead
Bulkhead
Channels
2 MM + 2 SM
2 SM
2 MM
2 MM + 2 SM
2 SM
2 MM
Color
Brown
Green
Black
Brown
Green
Black
* for cable assembly applications please contact your local TE representative
3-4
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Expanded Beam Products (Continued)
PRO BEAM Mini Connectors
TE Connectivity is pleased
to announce the natural
extension from our
PRO BEAM Sr. and Jr.
Connector product lines.
The PRO BEAM Mini
Connector saves space
and weight and is perfect
for high density applications. The product offers the
same durability as its larger
counterparts.
3
Ruggedized Fiber Optic Connectors
PRO BEAM Sr., Jr. & Mini Connectors
PRO BEAM Mini Plug Connector
PRO BEAM Mini Connector Shell Kits
Part Number
(HA Aluminum) (OD Aluminum) (NiAlBronze) (Black Aluminum)
EPDM Grip
1828698-1
N/A
1828698-2
N/A
Plug
1828699-1
1828699-2⽧ 1828699-3
1828699-4
Low Profile - Buffered Fiber
D-Hole
Low Profile - 1.8 Jacketed
1985140-1
1985140-2⽧ 1985140-3
1985140-4
Bulkhead
Sealed
1918185-1
1918185-3
1918185-2
1918185-4
Square Flange Low Profile - Buffered Fiber
1828826-1
*
*
*
Neutrik Cutout-Drop-In
1918603-1
*
*
*
Connector Assembly
1 Shell Kit
1 Insert Kit
1 Cable Adapter Kit*
X Ferrule Kits (X = No.
of optical channels)
Type
*Not applicable for Low Profile
Attribute
Difference
Mount
Style
* Contact TE for availability.
PRO BEAM Mini Insert Kits
Description
2 x 850 / 1300 nm Dual Multimode
2 x 1310 nm Singlemode
2 x 1550 nm Singlemode
4 x 850 / 1300 nm Dual Multimode
4 x 1310 nm Singlemode
4 x 1550 nm Singlemode
Part Number
1374759-4
1588129-2
1588128-2
1374759-2
1588129-3
1588128-3
PRO BEAM Mini Ferrule Kits
Fiber Hole Size
125 µm
126 µm
126 µm
Mode
SM
SM
MM
PRO BEAM Connector
Mini
Mini
Mini
Part Number
1754700-1
1754700-2
1754699-1
PRO BEAM Mini Cable Adapter Kits For Plug
Cable Diameter
5.1 mm
5.6 mm
6.2 mm
6.7 mm
Part Number
Aluminum
1828700-1
1828700-2
1828700-3
1828700-4
NiAIBronze
1828700-5
1828700-6
1828700-7
1828700-8
PRO BEAM Mini Cable Adapter Kits For Sealed Bulkhead
Standard color black for Polymer Grip
Rings, Cap and Boots. Alternate colors
available upon request.
Cable Diameter
5.1 mm
5.6 mm
6.2 mm
Part Number
1516228-1
1516228-2
1516228-3
Note: Part Numbers are RoHS compliant except: ⽧Indicates non-RoHS compliant.
3-5
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Expanded Beam Products (Continued)
PRO BEAM Mini Connectors
Performance Specifications
Optical, Multimode Version
Insertion Loss, Typical*—
0.7 dB @ 1300 nm and 850 nm dual
wavelength
Optical, Singlemode Version
Insertion Loss, Typical*—
0.8 dB @ 1310 nm or 1550 nm
optimized wavelength
Return Loss** — > 34 dB @ 1310
nm or 1550 nm optimized wavelength
*When tested with reference quality
launch/receive cable assemblies
**RL Tested Open Ended
PRO BEAM Mini Cable Connector, Plug
Mechanical
Vibration, Sinusoidal —
10 - 500 Hz, 3 directions;
0.75 mm amplitude @ 10g acceleration
Bump — 4,000 Bumps, 3 directions
@ 40g acceleration
Free Fall — 500 falls on concrete;
Severity 1.2 m
Coupling Endurance —
3,000 couplings
Weight —
Plug — 50 grams, typical
D-Hole bulkhead — 39 grams, typical
Recommended Panel Cutout
Temperature
Operational Temperature —
-40°C/+85°C
Storage Temperature —
-55°C/+85°C
Temperature, Cyclic —
-55°C/+85°C
Humidity (Damp Heat) —95% RH
PRO BEAM Mini D-Hole Bulkhead Connector,
Buffered Fiber, Low Profile
Immersion
Water — 5 m depth (plug) 2 m (Bulkhead)
Pressure
Low Pressure — 25 kPa @ -55°C
Material and Finish
Shell Alloy — Aluminum; or nickel
aluminum bronze (high saline environment)
Plating (For Aluminum Shells
Only) — clear hard anodized; or green
chromate conversion zinc or black zinc nickel alloy (PRO BEAM Mini Bulkheads
only)
Recommended Panel Cutout
Technical Documents
408-10065 Plug
408-10067 Square Flange Bulkhead
408-10069 Low Profile D-Hole Bulkhead
408-10076 Sealed D-Hole Bulkhead
http://www.te.com/documents
PRO BEAM Mini Low Profile, Square Flange Mount Bulkhead Connector
3-6
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Expanded Beam Products (Continued)
PRO BEAM Mini Connectors
(Continued)
36.00
[1.417]
22.00
[.866]
11.00
[.433]
0.10
Ø 3.40 +– 0.00
+ .004
[.134 – .000 ]
4 Plcs.
3.00
[.118]
0.20
Ø 19.00 +– 0.00
+ .008
[.748 – .000 ]
Ø 21.00
[.827]
Ø 18.00
[.709]
24.00
[.945]
2 Plcs.
31.00
[1.220]
3
Ruggedized Fiber Optic Connectors
19.00
[.748]
2 Plcs.
Recommended Panel Cutout
PRO BEAM Mini Low Profile,
Alternate Square Flange Mount Bulkhead Connector
40.00
[1.575]
76.00
[2.992]
38.00
[1.496]
0.20
Ø 24.00 +– 0.00
+ .008
[.945 – .000 ]
Ø 31.00 Ø 21.00
[.827]
[1.220]
Ø 16.00
[.630]
0.20
22.00 +– 0.00
+ .008
[.866 – .000 ]
Ø 20.00
[.787]
Recommended Panel Cutout
PRO BEAM Mini D-Hole Bulkhead Connector,
Sealed, Mil-Tactical Cable
3-7
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Expanded Beam Products (Continued)
PRO BEAM Jr. Connectors
Performance Specifications
Optical, Multimode Version
Insertion Loss, Typical*—
0.7 dB @ 1300 nm and 850 nm dual
wavelength
Optical, Singlemode Version
Insertion Loss, Typical*—
PRO BEAM Jr. Cable Connector, Plug
0.8 dB @ 1310 nm or 1550 nm
optimized wavelength
Return Loss**— > 34 dB @ 1310
nm or 1550 nm optimized wavelength
*When tested with reference quality
launch/receive cable assemblies
**RL Tested Open Ended
Mechanical
Vibration, Sinusoidal —
10 - 500 Hz, 3 directions;
0.75 mm amplitude @ 10g acceleration
Bump — 4,000 Bumps, 6 directions
@ 50g acceleration
Free Fall — 500 falls on concrete;
Severity 1.2 m
Coupling Endurance —
3,000 couplings
Weight —
Plug — 123 grams, typical
D-Hole bulkhead — 102 grams, typical
Panel Cutout
Front View
PRO BEAM Jr. Square Flange Mount Bulkhead Connector
Temperature
Operational Temperature —
-40°C/+85°C
Storage Temperature —
-55°C/+85°C
Temperature, Cyclic —
-55°C/+85°C
Humidity (Damp Heat) —95% RH
PRO BEAM Jr., Low Profile,
Square Flange Mount Bulkhead Connector
PRO BEAM Jr.,
Loopback Plug Connector
Immersion
Water — 15 m depth (plug) 15 m (Bulkhead)
Material and Finish
Shell Alloy — Aluminum; or nickel
aluminum bronze (high saline environment)
Plating (For Aluminum Shells
Only) — clear hard anodized; or green
chromate conversion zinc or black zinc nickel alloy (PRO BEAM Jr. Bulkheads
only)
Recommended D-hole
Panel Cutout
PRO BEAM Jr. D-Hole Standard Bulkhead Connector without Boot
Bulkhead Connector Panel
Thicknesses
PRO BEAM Jr. Bulkhead Connector
D-Hole — 4 mm max.
PRO BEAM Jr. Bulkhead Connector
Square Flange — 6 mm max.
PRO BEAM Jr. Right Angle Plug
Standard color black for Polymer Grip
Rings, Cap and Boots. Alternate colors
available upon request.
PRO BEAM Jr. Low Profile D-Hole Bulkhead Connector
3-8
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Expanded Beam Products (Continued)
PRO BEAM Jr. Connectors
With Boot for Cable
Ø 3mm or Ø 4mm
With Boot for Cable
≥ Ø 5mm
3
PRO BEAM Jr. Standard Bulkhead Connector, with Boot
Ruggedized Fiber Optic Connectors
PRO BEAM Jr. Sealed Bulkhead Connector
3-9
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Expanded Beam Products (Continued)
PRO BEAM Jr. Connectors
PRO BEAM Jr. Connector Shell Kits
(Continued)
Alloy
Connector Assembly
1 Shell Kit
1 Insert Kit
1 Cable Adapter Kit*
X Ferrule Kits (X = No.
of optical channels)
Part Numbers listed are
Shell alloy = aluminum
Plating = hard anodized.
Consult TE Connectivity
for other plating/material
options such as non-cadmium
olive drab or RoHS-compliant
black Zn/Ni.
Hard Anodized
Aluminum
Description
Part Number
1918937-1
PRO BEAM Jr. Plug w/EPDM rubber
1985915-1
PRO BEAM Jr. Right-Angle Plug Kit
PRO BEAM Jr. D-Hole Low Profile, Buffered Fiber Bulkhead
1693741-1
6828413-1
PRO BEAM Jr. D-Hole Low Profile, Simplex Cable Bulkhead
1918939-1
PRO BEAM Jr. D-Hole Standard Bulkhead
PRO BEAM Jr. D-Hole Sealed Bulkhead
1918940-1
PRO BEAM Jr. Square Flange Low Profile Buffered Fiber Bulkhead
1754439-1
1918943-1
PRO BEAM Jr. Square Flange Standard Bulkhead
NiAlBz
Part Number
1918937-2
—
1693741-2
—
1918939-2
1918940-2
1754439-2
1918943-2
Black Zinc
Aluminum
Part Number
—
—
1754445-3
6828413-2
1918941-2
1918940-4
1754447-3
—
PRO BEAM Jr. Loopback Plug Assembly
Part Number
1516506-1
1516506-2
1516506-3
1516506-4
Description
4 x 850 / 1300nm Multimode, 62.5/125 µm fiber
4 x 850 / 1300nm Multimode, OM3 50/125 µm fiber
4 x 1310nm Singlemode
4 x 1550nm Singlemode
PRO BEAM Jr. Insert Kits
Description
2 x 850 / 1300nm Multimode
2 x 1310nm Singlemode
2 x 1550nm Singlemode
4 x 850 / 1300nm Multimode
4 x 1310nm Singlemode
4 x 1550nm Singlemode
Part Number
1515743-1
1515739-1
1516040-1
1515747-1
1515740-1
1516041-1
Ferrule Kits
Fiber Hole Size
125 m
126 m
126 m
Mode
SM
SM
MM
PRO BEAM
Jr.
Jr.
Jr.
Part Number
1588908-2
1588908-1
1588700-1
PRO BEAM Jr. Connector Plug & Sealed Bulkhead Cable Adapter Kits
Technical Documents
Product Specification
108-2177 Design Objectives
Application Specification
114-13099
Instruction Sheets
408-10250 Grounding and Standard
D-Hole Bulkhead
408-10222 Plug
408-10249 Sealed D-Hole Bulkhead
408-8834 Low Profile Square Flange
Bulkhead
408-8840 Low Profile D-Hole
Bulkhead
408-10251 Standard Square Flange
Bulkhead
408-10018 Low Profile D-Hole
Simplex Cable Bulkhead
408-10252 7.5 Cable Adapter
http://www.te.com/documents
Cable Dia. Max.
3.2
3.6
4.2
5.2
5.7
6.2
6.7
7.5 (breakout cable only)
Aluminum
Plug
Part Number
1918931-1
1918931-2
1918931-3
1918931-4
1918931-5
1918931-6
1918931-7
1918931-8
NiAlBz
Aluminum
NiAlBz
Plug
Sealed Bulkhead Sealed Bulkhead
Part Number
Part Number
Part Number
1918931-9
1918932-1
1918932-9
1-1918931-0
1918932-2
1-1918932-0
1-1918931-1
1918932-3
1-1918932-1
1-1918931-2
1918932-4
1-1918932-2
1-1918931-3
1918932-5
1-1918932-3
1-1918931-4
1918932-6
1-1918932-4
1-1918931-5
1918932-7
1-1918932-5
1-1918931-6
1918932-8
1-1918932-6
Black Zn-Ni
Part Number
2-1918932-5
2-1918932-6
2-1918932-7
2-1918932-8
2-1918932-9
3-1918932-0
3-1918932-1
3-1918932-2
PRO BEAM Jr. Connector Standard Bulkhead Cable Adapter Kits*
Cable Dia. Max.
3.2
4.1
5.1
5.5
6.0
4 x 3.00
Aluminum
with Boot
Part Number
1918933-1
1918933-2
1918933-3
1918933-4
1918933-5
1918933-8
NiAlBz
with Boot
Part Number
1918933-9
1-1918933-0
1-1918933-1
1-1918933-2
1-1918933-3
1-1918933-6
Black Zn-Ni
Part Number
2-1918933-5
2-1918933-6
2-1918933-7
2-1918933-8
2-1918933-9
3-1918933-2
Aluminum
without Boot
Part Number
1918934-1
1918934-2
1918934-3
1918934-4
1918934-5
1918934-7
NiAlBz
without Boot
Part Number
1918934-8
1918934-9
1-1918934-0
1-1918934-1
1-1918934-2
1-1918934-4
Black Zn-Ni
Part Number
2-1918934-2
2-1918934-3
2-1918934-4
2-1918934-5
2-1918934-6
2-1918934-8
* Standard Cable Adapter. Not applicable for Low Profile.
Note: Part Numbers are RoHS compliant except: ⽧Indicates non-RoHS compliant.
3-10
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Expanded Beam Products (Continued)
PRO BEAM Jr. Connectors
(Continued)
Spare Parts & Tools
Technical Documents
Curing Fixtures
Connector
PRO BEAM Jr. Cable Plug (having cable with KEVLAR strength member fiber)
PRO BEAM Jr. Sealed D-Hole Bulkhead
PRO BEAM Jr. Standard D-Hole and Square Flange Bulkhead
PRO BEAM Jr. Low Profile Buffered Fiber Bulkhead
3
Part Number
1693797-1
1693800-1
1754122-1
Ruggedized Fiber Optic Connectors
Product Specifications
408-8857 Curing Fixtures for
PRO BEAM Jr. and Sr.
Connectors
408-8828 Cleaning Procedure for
EB C/A's
Tooling Specifications
408-8795 Crimp Tool with Die Set for
PRO BEAM Jr. and Sr.
Connectors
408-10022 Die Assembly for Mini and
Jr. Circular Crimps
http://www.te.com/documents
Instruction Sheet 408-8857. Available at www.te.com
Cable Crimp Components
Description
Crimp Sleeve (use with all PRO BEAM Jr. Connector Crimp Support sizes)
3.2 mm Crimp Support
4.2 mm Crimp Support
5.2 mm Crimp Support
5.7 mm Crimp Support
6.2 mm Crimp Support
6.7 mm Crimp Support
Square Crimp Support for (4) 3 mm Cables
Part Number
1918497-1
1918498-1
1918498-2
1918498-3
1918498-4
1918498-5
1918498-6
1985319-1
Ferrule Kits
Fiber Hole Size
125 µm
126 µm
126 µm
Mode
SM
SM
MM
PRO BEAM
Jr.
Jr.
Jr.
Part Number
1588908-2
1588908-1
1588700-1
Protective Caps
Description
Standard cap, for D-Hole Bulkhead
Standard cap, for Flange Mount Bulkhead
Standard cap, for connector plug
PRO BEAM
Jr.
Jr.
Jr.
Part Number
1515868-1
1515787-2
1515867-1
Termination Kit
Part Number
1828650-1
KEVLAR is a trademark of E. I. du Pont
de Nemours and Company.
Note: All part numbers are RoHS compliant.
3-11
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Expanded Beam Products (Continued)
PRO BEAM Sr. Connectors
Performance Specifications
Optical, Multimode Version
Insertion Loss, Typical*—
0.7 dB @ 1300 nm and 850 nm dual
wavelength
Optical, Singlemode Version
Insertion Loss, Typical*—
Front View
Cap Removed
0.8 dB @ 1310 nm or 1550 nm
optimized wavelength
Return Loss** — > 34 dB
@ 1310 nm or 1550 nm optimized
wavelength
*When tested with reference quality
launch/receive cable assemblies
**RL Tested Open Ended
PRO BEAM Sr. Cable Connector, Plug
Mechanical
Vibration, Sinusoidal —
10 - 500 Hz, 3 directions;
0.75 mm amplitude @ 10g acceleration
Bump — 4,000 Bumps, 6 directions,
@ 50g acceleration
Free Fall — 500 falls on concrete;
Severity 1.2 m
Coupling Endurance —
3,000 couplings
Weight —
Plug — 290 grams, typical
Chassis bulkhead — 150 grams, typical
Panel Cutout
Front View
Cap Removed
PRO BEAM Sr. D-Hole Bulkhead Connector with Standard Cable Adapter
Temperature
Operational Temperature —
-40°C/+85°C
Storage Temperature — -55°C/+85°C
Temperature, Cyclic — -55°C/+85°C
Humidity (Damp Heat) —95% RH
Immersion
Water — 5 m depth (plug),
2 m (Bulkhead)
Panel Cutout
Front View
Cap Removed
Material and Finish
Shell Alloy — Aluminum; or nickel
aluminum bronze (high saline environment)
Plating (For Aluminum Shells Only) —
clear hard anodized or black zinc - nickel
alloy (PRO BEAM Sr. bulkheads only)
PRO BEAM Sr. Square Flange Mount Bulkhead Connector with Standard Cable Adapter
Bulkhead Connector Panel
Thicknesses
PRO BEAM Sr. D-Hole Connector —
6.5 mm max.
PRO BEAM Sr. Square Flange
Connector — 8.5 mm max.
Technical Documents
3-12
Product Specifications
408-8799 Plug
408-8800 D-Hole Bulkhead
408-8877 Square Flange Bulkhead
Application Specification
114-13122
http://www.te.com/documents
Catalog 1308940
Revised 9-14
www.te.com
Standard color black for Polymer Grip Rings, Cap and Boots. Alternate colors available upon request.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Expanded Beam Products (Continued)
PRO BEAM Sr. Connectors
(Continued)
PRO BEAM Sr. Connector Shell Kits
PRO BEAM Sr. Plug w/EPDM rubber
PRO BEAM Sr. D-Hole Standard Bulkhead
PRO BEAM Sr. Square Flange Standard Bulkhead
Connector Assembly
1 Shell Kit
1 Insert Kit
1 Cable Adapter Kit*
X Ferrule Kits (X = No.
of optical channels)
*Not applicable for Low Profile
PRO BEAM Sr. Insert Kits
2 x 850 / 1300 nm Multimode
2 x 1310 nm Singlemode
4 x 850 / 1300 nm Multimode
4 x 1310 nm Singlemode
8 x 850/1300 nm Multimode
8 x 1310 nm Singlemode
8 x 1550 nm Singlemode
Part Number
1693001-1
1515734-2
1693001-2
1515735-1
1516256-1
1516258-1
1516258-2
3
Ruggedized Fiber Optic Connectors
Part numbers listed are
Shell alloy = aluminum
Plating = hard anodized.
Consult TE Connectivity
for other plating/material
options such as NiAlBz for
Naval applications, or other
plating options such as RoHScompliant black Zn-Ni.
Alloy
Aluminum
NiAlBz
Part Number
Part Number
1754842-1
1754842-2
1754843-1
1754843-2
1754844-1
1754844-2
PRO BEAM Sr. Ferrule Kits
Fiber Hole Size
125 µm
126 µm
126 µm
125 µm
126 µm
126 µm
Mode
SM
SM
MM
SM
SM
MM
Insert Application
2 & 4 Channel
2 & 4 Channel
2 & 4 Channel
8 Channel
8 Channel
8 Channel
Part Number
1515941-1
1515941-2
1588801-1
1985635-1
1985635-2
1985107-1
PRO BEAM Sr. Connector Plug Adapter Kits
Alloy
Aluminum
NiAlBz
Part Number
Part Number
Cable Dia. (Max.)
5.10
.201
5.65
.222
6.20
.244
6.70
.264
1515940-1
1515940-2
1515940-3
1515940-4
1515940-5
1515940-6
1515940-7
1515940-8
PRO BEAM Sr. Connector Standard Bulkhead Cable Adapter Kits
Technical Documents
Product Specifications
408-8857 Curing Fixtures for
PRO BEAM Jr. and Sr.
Connectors
408-8828 Cleaning Procedure for
EB C/A's
Tooling Specifications
408-8795 Crimp Tool with Die Set for
PRO BEAM Jr. and Sr.
Connectors
http://www.te.com/documents
Cable Dia. (Max.)
5.20
.205
5.70
.224
Buffered
Fiber
6.70
.264
4 x 3 mm
Style
Alloy
Aluminum
NiAlBz
Part Number
Part Number
Standard Cable Adapter
1516229-3
1516229-7
Standard Cable Adapter
1516229-2
1516229-6
Low Profile Adapter
1516229-4
1516229-8
Standard Cable Adapter
1-1516229-3
1-1516229-4
Standard Cable Adapter
1516229-1
1-1516229-5
Note: All part numbers are RoHS compliant.
3-13
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Expanded Beam Products (Continued)
38999 Style EB for Harsh
Environments
Product Facts
■
Available in shell size 11,
housed on D38999 Series III
style shells for harness
applications
■
Multiple options available
for backshells. Consult
your local TE Connectivity
Sales Representative
■
Shell polarizations A through
E available upon request
38999 Plug Shell Kit
for mini EB
Standard Material and Finish
Shell Alloy — Aluminum
Plating — Nickel or green chromated
zinc or RoHS-compliant black
chromated zinc-nickel alloy
38999 Jam-Nut Receptacle
Shell Kit for mini EB
*Refer to customer drawing
for dash number
designation
For part number details and
plating options, contact
your local TE Connectivity
Sales Representative.
38999 Shell Kit Wall Mount
Receptacle for mini EB
38999 D-Hole Bulkhead Shell Kit
38999 Receptacle Shell Kit
Wall Mount Flange
Note: All part numbers are RoHS compliant.
3-14
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Expanded Beam Products (Continued)
38999-style EB for Harsh
Environments (Continued)
38999 Plug Shell Kit
3
Ruggedized Fiber Optic Connectors
38999 Plug Shell Kit
for Ø 1.8 mm Avionics Cable
38999 Jam-Nut Receptacle
for Ø 1.8 mm Avionics Cable
38999 Square Flange Receptacle
Shell Kit for Ø 1.8 mm Avionics Cable
3-15
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Expanded Beam Products (Continued)
38999-style EB for Harsh
Environments (Continued)
Size 11 Shield Kit
Use with:
Finish:
Plug:
Jam-Nut Receptacle:
Flange-Mount Receptacle:
Mini EB 38999 Connector Shell Kits (N-Key)
Ø1.8 mm Max Avionics Cable
MIL-Tactical Distribution Cable
Buffered Fiber Only
Electroless
Black
Electroless
Black
Electroless
Black
Ni Plate
OD Zn
Zn-Ni
Ni Plate
OD Zn
Zn-Ni
Ni Plate
OD Zn
Zn-Ni
6754518-1 1754518-7⽧ 6754518-7
1985021-1 1985021-7⽧
—
1918883-1 1918883-7⽧ 1-1918883-3
6754519-1 1754519-7⽧ 6754519-7
2064163-1 2064163-7⽧
—
1918884-1 1918884-7⽧ 1-1918884-3
6754520-1 1754520-7⽧ 6754520-7
2064166-1 2064166-7⽧
—
1918885-1 1918885-7⽧ 1-1918885-3
* Contact TE Connectivity for availability.
Size 15 Shield Kit
Use with:
Finish:
Plug:
Jam-Nut Receptacle:
Flange-Mount Receptacle:
2.2 mm Ø Max Avionics Cable
Electroless Nickel Plate
Black Zinc Nickel
1516342-1
1516342-7
1516343-1
1516343-7
1516344-1
1516344-7
End Nut Backshell for Non-Jacketed Cable
Electroless Nickel Plate
Black Zinc Nickel
1516338-1
1516338-7
1516339-1
1516339-7
1516340-1
1516340-7
Cable Adapter Kits For 38999 Mini EB Mil-Tactical
Cable Diameter
5.1 mm
5.6 mm
6.2 mm
Part Number
1516228-1
1516228-2
1516228-3
Ferrule Kits
Insert Kits
Description
Mini 2 x 850 / 1300 nm Dual Multimode
Mini 2 x 1310 nm Singlemode
Mini 2 x 1550 nm Singlemode
Mini 4 x 850 / 1300 nm Dual Multimode
Mini 4 x 1310 nm Singlemode
Mini 4 x 1550 nm Singlemode
8 x 850/1300 nm Multimode
8 x 1310 nm Singlemode
8 x 1550 nm Singlemode
Part Number
1374759-4
1588129-2
1588128-2
1374759-2
1588129-3
1588128-3
1516256-1
1516258-1
1516258-2
Fiber Hole Size
125 µm
126 µm
126 µm
125 µm
126 µm
126 µm
Mode
SM
SM
MM
SM
SM
MM
Insert Type
Mini
Mini
Mini
8 Channel
8 Channel
8 Channel
Part Number
1754700-1
1754700-2
1754699-1
1985635-1
1985635-2
1985107-1
38999 Plug Cap
1918024-1 Size 11
1918024-2 Size 15
38999 Receptacle Cap
1918025-1 Size 11 = Jam Nut Receptacle
1918025-2 Size 11 = Square Flange Receptacle
1918025-3 Size 15 = Jam Nut Receptacle
1918025-4 Size 15 = Square Flange Receptacle
Note: Part Numbers are RoHS compliant except: ⽧Indicates non-RoHS compliant.
3-16
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Expanded Beam Products (Continued)
EB termini
Product Facts
■
Durable non-contacting
interface assures ease of
use/cleaning
■
Termini designed to replace
existing M29504/4 and /5
physical contact termini that
fits the Size 16 AWG cavity
of a D38999 III connector
■
MM and SM termini designs
EB termini are combination
of inserts (containing the
lens) and EB termini (for
terminating the fiber.
3
Ruggedized Fiber Optic Connectors
3-17
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Cable Assemblies and Accessories
Product Facts
Featured Cable Assemblies
■
Ruggedized cable
assemblies custom
tailored for field use in
harsh environments
■
Heavy-duty light-weight
cable reel organizes and
protects connectors and
cable for easy pay-out and
safe storage
■
Options for 500 meter reels
include special backpack
harnesses, a separate reel
stand, or a combination reel
and reel stand
TFOCA to PRO BEAM Jr. Plug
Cable Assembly
1828536-1⽧
LP D-Hole Bulkhead to 4 ST
62.5/125 on 1.8 mm cable
6828454-1⽧
Plug to Plug (100 meters)
6754475-2
Typical Reels and Reel Stands for Field-Deployable Cable Assemblies
Tactical Reel/Drum Options
1918930-1
Cable Reels
Reel Capacity (Random Lay)
Cable Diameter
5.8 mm
PRO BEAM Jr. Kits
PRO BEAM Jr.
Termination Kit
1828650-1
Cleaning Kit
1828335-2
186 M
247 M
462 M
816 M
1052 M
Notes/Description
Reel & Reel Stand Combination
Reel can be detached
from stand without tools
Reel*
Reel*
Reel*
Reel*
Flange
Diameter
Part Number
310 mm
1918930-1
310 mm
370 mm
460 mm
510 mm
1754515-1
1754515-2
1754515-3
1754515-4
* See Accessories options below
TFOCA-II is a trademark of Amphenol
Fiber Systems International.
Note: Part Numbers are RoHS compliant except: ⽧Indicates non-RoHS compliant.
3-18
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Cable Assemblies and Accessories (Continued)
3
Backpack Harness
Ruggedized Fiber Optic Connectors
Backpack with Reel
Reel with Stand
“Static Frame”
Accessories
Description
Backpack
Backpack
Backpack
Static Frame
Static Frame
Reel Diameter
370 mm Dia. Reel
460 mm Dia. Reel
510 mm Dia. Reel
500 mm Dia. Max
700 mm Dia. Max
Part Number
1754516-1*
1754516-2*
1754516-3*
1754517-1*
1754517-2*
* Reel must be ordered separately.
Note: For lower cost alternative options. Please contact your local TE Connectivity Sales Representative or
TE Product Information Center at 1-800-522-6752.
3-19
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Tactical Optical Cable
Non-Metallic Tactical Field Deployable Fiber Optic Cable
Product Facts
Technical Data
■
■
■
■
All terrain field deployable
cable, up to 4 fibers,
singlemode or multimode
Developed for deployment
under the most demanding
conditions
Tight buffered fibers are
protected by Aramid yarns
and a tough ruggedized
polyurethane sheath
Tested in accordance with
MIL-PRF-85045
■
Flexible, water resistant,
high crush resistant, and
lightweight,
■
Designs available to be
resilient against radiation
exposure
ARMOR-LIGHT Tactical
Field Deployable Fiber
Optic Cable for Extreme
Environments (Metallic for
Rodent Proof)
Mil-Standard Distribution
Cable — 2 Fiber Singlemode
Mil-Standard Distribution
Cable — 2 Fiber Multimode
Attenuation — ≤ 0.5 dB/km @
1310 nm / ≤ 0.5 dB/km @ 1550 nm
Diameter — 5.8 mm
Weight — 25 kg/km
Minimum Bending Radius — 29 mm
Crush Resistance — 2000 N/cm
Operating Temperature —
-55° C to +85° C
Fiber Type — 50 µm/125 µm and
62.5/125
Attenuation — ≤ 3.5 dB/km @ 850 nm /
≤ 1.0 dB/km @ 1300 (62.5/125);
≤ 3.5 dB/km @ 850 nm / ≤ 1.5 dB/km @
1300 (50/125)
Mil-Standard Distribution
Cable — 4 Fiber Singlemode
Attenuation — ≤ 0.5 dB/km @
1310 nm / ≤ 0.5 dB/km @ 1550 nm
Diameter — 5.8 mm
Weight — 27 kg/km
Minimum Bending Radius — 28 mm
Crush Resistance — 2000 N/cm
Operating Temperature —
-55° C to +85° C
Mil-Standard Distribution
Cable — 4 Fiber Multimode
Other fibers (i.e. Polyimide,
Silicon buffer, Carbon
coated, radiation hardened,
etc.) are available upon
request.
Contact TE Connectivity
or your local TE Sales
Representative for part
numbers, pricing, and
availability.
Fiber Type — 50 µm/125 µm and
62.5/125
Attenuation — ≤ 3.5 dB/km @ 850 nm /
≤ 1.0 dB/km @ 1300 (62.5/125);
≤ 3.5 dB/km @ 850 nm / ≤ 1.5 dB/km @
1300 (80/125)
4-Color Optical Fiber Cable Specification for Armored Cable for Ruggedized Applications
Construction:
■
■
■
■
■
4-color coded fibers
Fiber types 50/125/250 µm,
62.5/125/250 µm and 9/125/250 µm
Stainless steel gel filled tube
Stainless steel wire
Jacket — Nylon, black
PA Jacket
Fiber
Type
Part
Number
Outside
Dia. (mm)
Weight
kg/km
62.5/125
50/125
SM
1588957-1
1588957-2
1588957-4
3.8
3.8
3.8
24
24
24
850 nm
3.5
2.7
X
Stainless
Steel Tube
Gel Filled
Stainless
Steel Wires
Primary
Coated Fiber
Max. Attenuation dB/km
1300 nm 1310 nm 1550 nm
1.0
X
X
0.9
X
X
X
0.40
0.25
Bandwidth MHz-km
850 nm 1300 nm
160
500
400
1200
X
X
Notes: 35 mm recommended bend radius.
3.1 kN breaking strength.
2-Color Optical Fiber Cable Specification for Armored Cable for Ruggedized Applications
Construction:
■
■
■
■
■
2-color coded fibers
Fiber types 50/125/250 µm,
62.5/125/250 µm and 9/125/250 µm
Stainless steel gel filled tube
Stainless steel wire
Jacket — Nylon, black
PA Jacket
Fiber
Type
Part
Number
Outside
Dia. (mm)
Weight
kg/km
62.5/125
50/125
SM
1693808-1
1693808-2
1693808-4
3.8
3.8
3.8
24
24
24
850 nm
3.5
2.7
X
Stainless
Steel Tube
Gel Filled
Stainless
Steel Wires
Primary
Coated Fiber
Max. Attenuation dB/km
1300 nm 1310 nm 1550 nm
1.0
X
X
0.9
X
X
X
0.40
0.25
Bandwidth MHz-km
850 nm 1300 nm
160
500
400
1200
X
X
Notes: 35 mm recommended bend radius.
3.1 kN breaking strength.
Note: All part numbers are RoHS compliant.
3-20
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Commercial Fiber Optic Mechanical Splicing Kit
Part Number: 1985368-1
Product Facts
■
■
■
Terminates 250 micron
coated, 900 micron tightbuffered fibers and 2.0 mm
jacketed cable
Attenuation (typical):
≤0.1dB
Return Loss (at ambient;
18° to 28° C):
≥20 dB multimode
≥35 dB single-mode
■
Operating Temperature:
-25° to 70° C
■
Storage Temperature:
-40° to 85° C
■
Part Number: 1516626-1
Tensile retention:
250 micron coated: 2.0 N
900 micron buffered: 3.0 N
Jacketed: 50.0 N
The TFOCA Military/
Commercial Fiber Optic
Mechanical Splicing Kit
contains the following items:
■
2 JPS-400 Splice
Protection Sleeves
■
12 Mechanical Splices
■
Light Crimp Splice
■
Precision Cleaver
■
Crimp Tool with Crimp Die
■
Splice Holder with Strip
Template
■
Cleaning Materials
■
Tool Roll with all Required
Tools
■
Support for LC/SC Light
Crimp Connectors
■
Lightweight, rugged Case
■
Specifically designed for
external application in
traction industry
■
Size: 15” x .630” (ID) x
.932” (OD)
■
Re-enterable & Re-usable
■
Conforms to TFOCA reel
sizes
■
Cable Size Range: .196”.394”
■
Pull Strength (Load Test):
250 lbs
■
Waterproof
3
Ruggedized Fiber Optic Connectors
The KITCO 0831-8238 Kit
Provides a low cost, highly
reliable, solution for the
repair of Tactical Fiber Optic
Cables featuring the
TE Connectivity Mechanical
Splice. The Kit contains all
of the tools and materials
required to make (3) three
four channel cable repairs,
including the JPS-400
Splice Protection Sleeve.
An Ideal solution in a
tactical environment
when system reliability is
essential, not an option!
Light Crimp Splice
Part Number: 1516516-1
JPS Splice Enclosure
Part Number: 1516516-1
The JPS 400 Splice Enclosure
is designed to protect
TFOCA cable that has been
repaired with any mechanical
splice or fusion splicer.
Designed & evaluated by
the United States Marine
Corps, this product works in
all field applications, even in
severe or harsh battlefield
environments. Simple to
install and easy to re-enter,
yet flexible enough to conform
to the diameter of a reel
Ser
Number
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(j)
(k)
(l)
when re-wound. The JPS
400 is ideal for both TFOCA
AND TFOCA Second
Generation applications.
There are two high-grade
brass retention assemblies
that use both the jacket and
the Aramid yarn found in
TFOCA cable to provide
strain relief & secure the
fiber inside the waterproof
housing. A waterproof
compression gasket
prevents water and other
contaminants from entering
the housing.
JPS 400
Mechanical Properties &
Performance Specifications:
■
High-grade formulated
polyamide conduit &
threaded adapters
■
Self-extinguishing, low
smoke, halogen & cadmium free
■
Temperature Range: -50C
to +105C continuous,
150C short term
■
Chemical resistance to
fuels, mineral oils, fats,
and alkalies
Compliance to RFP
In case of non-compliance
specification
deviation from RFP to be specified
YES/NO
in unambiguous terms
Splicing Capability
For up to 1-4 splices SM & MM
Y
Water Proofing Standard
IP64 class for the hard cover case
Y
Tube Protection class
Better then IP67 (24 h @ 5000 mm)
IP68
Time taken to repair a cable
Fast & reliable cable repair within
Y
10 min - 30 min (1F , 4F)
Maximum Attenuation for Mechanical splices Typical value < 0.2 db @ 1300 nm
Y
Should be able to splice Armored/
Yes
Y
Ruggedized cable (as offered by the vender)
Reusable components
100% reusable components (except
Y
mechanical splice protector)
Temperature range
Operating Temp:-10°C - 50°C
Non-Operating Temp: -40°C 71°C
Weight
< 4.2 kg
Do not have kit. TE has kit in India.
Dimensions (max)
410x33x202mm
Do not have kit. TE has kit in India.
Tensile load of cable after repair
No Change
250 lbs
RFP Specification
3-21
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Optical Test Set for Fiber Optic Cables
Designed for harsh
environments
Product Facts
■
Especially designed to
support the installation of
optical links in the field
■
Able to test both cable
drums and entire links
■
Powered by batteries with
high autonomy
■
Suitable for diagnostics
and construction teams
■
Easy to use, ergonomic,
rugged design
■
Suitable for cable length
up to 10 km
■
Supports up to 4 fibers per
cable with various types of
connectors
Diagnostic Features
Power Meter
Drum Test / Cable Test
The optical power from any
source can easily be measured with the power meter
function.
Test of an entire cable drum
with automatic good/bad
indication. The test of an
entire cable is realized with
a 2nd KPG-opt or a loop
connector.
Optical Source
A continuous optical signal
is generated and transmitted with selectable output
power.
Test Frames (optional)
The KPG-opt can generate
specific test frames as used
in optical networks and LOS
systems.
Optical Tester
Description
850 nm 38999 III Size 11 Optical Test Kit
850/1300 nm PRO BEAM Jr. Optical Test Kit
1310 nm PRO BEAM Jr. Optical Test Kit
Part Number
1918016-1
1918016-2
1985006-1
For additional wavelength testers, contact your local TE Connectivity Sales
Representative.
Protective Case
1918082-1
Note: All part numbers are RoHS compliant.
3-22
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Fiber Optic Accessories
Hand Held Visual Fault
Locator (VFL)
Product Facts
650 nm (visible) Class 2
1.0 mW max Diode Laser
■
Continuous and flashing
(2-3 Hz pulsed) modes
■
Rugged rubber shell and
body design modeled after a
popular military connector
■
Lanyard attached dust cover
■
Standard 2.5 mm adapter for
SC, ST, and FC connectors
■
Optional 1.25 mm adapter
for LC and MU connectors.
■
Unique design allows
adapter to permanently
reside on VFL so it is not
misplaced allowing user to
choose 1.25 mm or 2.5 mm
■
Uses 1 “AA” style battery
for >30 hours of continuous
use
■
Soft-sided belt case for
convenience and storage
3
The TE Connectivity Hand
Held Visual Fault Locator
(VFL) is a rugged and
affordable solution for identifying breaks and bending
in optical fibers and cabling.
Its powerful, red (650 nm)
laser provides the ability to
locate damaged, broken, or
tightly bent fibers that cause
undesirable attenuation in
your system.
The jacket of the cable will
glow red at the location of
the fault. The FLASH button
allows the user to toggle
between continuous or
pulsed mode. The compact,
rugged, and balanced
design is based upon a
popular harsh environment
fiber optic connector. The
single “AA” style battery is
good for >30 hours of continuous use and the softsided protective case with
belt loop provides a convenient and protective
means of storage.
Ruggedized Fiber Optic Connectors
■
Applications
Affordable VFL Solution for:
■
Identifying breaks, bends,
and other damage in
optical fibers
■
Tracing fiber paths
■
Identifying termination
errors
■
Continuity testing
Product Dimensions
Description
Hand Held Visual Fault Locator
1.25 mm Adapter for Hand Held VFL
Includes Part Numbers 1828352-1 and 1828353-1
Part Number
1828352-1
1828353-1
1828352-2
Length — 18.5 cm [7.283 in]
Width — 2.2 cm [0.866 in]
Thickness — 2.2 cm [0.866 in]
Weight (w/battery) — 150 g [0.33 lb]
3-23
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Expanded Beam Avionics-Related Standards and Specifications
ARINC 600, 664, 763 and
801
Typical Assemblies for In-Flight Network Applications
ARINC 664 — Aircraft Data
Network
TE Connectivity’s ARINC Connectors
with Mini Expanded Beam inserts will
meet/exceed all 100 Base-FX Ethernet
LAN applications
ARINC 763 — Avionics
Network Server System —
TE’s ARINC 600 Connectors are
designed to meet/exceed 100 Base-FX
Ethernet LAN applications.
Network Server Unit (NSU) — can
use ARINC 600 Size 1 connector with
up to 8 Expanded Beam fiber optic
channels (two Mini Expanded Beam
inserts in cavity C)
Server Interface Unit (SIU) — can
use ARINC 600 Size 3 connector with
up to 16 Expanded Beam fiber optic
channels (four Mini Expanded Beam
inserts in cavity F)
Integrated Network Server Unit
(INSU) — can use ARINC 600 Size 3
connector with up to 16 Expanded Beam
fiber optic channels (four Mini Expanded
Beam inserts in cavity F)
ARINC 801 — Fiber Optics
Working Group
TE provides a single reference point
for Flight Level Optics that are multisourced.
Typical Assemblies
3-24
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
ARINC 600 and 404
Product Facts
For Mini Expanded Beam
Inserts
■
For use in 100 base-FX
Ethernet LAN applications
per ARINC 664 and
ARINC 763
■
Insert holders designed to
ARINC 600, Supplement 13
or to specific customer
needs for Mini Expanded
Beam inserts
■
Drop-In Insert Holders
utilize Standard ARINC 600
Retainers
■ Hard Stop on Plug Side
■ Spring-Loaded Stop on
Receptacle Side
■ Captive Hardware
■
Facial Sealing — Optional
■ Bonded to Receptacle
Block Mating Face
■ Raised Collar Seal
around Optics Insert
compresses against
Chamfer on Plug Block
Mating Face
3
Ruggedized Fiber Optic Connectors
■
ARINC 600 Insert Holders for Mini-Expanded Beam Contacts
Size 1
Power Cavities
ARINC 600, 1 Position
1MP
ARINC 600, 2 Position
2MP
ARINC 600, 1 Position
1MS
ARINC 600, 2 Position
2MS
Size 1
Signal Cavities
ARINC 600, 3 Position
3MS
See next page for Size 2 / 3 Power and Signal Cavities
3-25
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
ARINC 600 and 404 (Continued)
Size 2 / 3
Power and Signal Cavities
ARINC 600, 4 Position
4MP
ARINC 600, 6 Position
6MS
Rack and Panel Mini Insert Kits
Description
2 x 850 / 1300 nm Dual Multimode
2 x 1310 nm Singlemode
2 x 1550 nm Singlemode
4 x 850 / 1300 nm Dual Multimode
4 x 1310 nm Singlemode
4 x 1550 nm Singlemode
Part Number
1374759-3
1588839-3
1754622-3
1374759-1
1588839-1
1754622-4
Ferrule Kits
Fiber Hole Size
125 µm
126 µm
126 µm
Mode
SM
SM
MM
PRO BEAM Connector
Mini
Mini
Mini
Part Number
1754700-1
1754700-2
1754699-1
ARINC 600 Insert Holders
for Mini-Expanded Beam
Contacts
Typical Layout for Plug
Typical Layout for Receptacle
3-26
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
ARINC 600 and 404 (Continued)
M2 Mini-Expanded Beam
Insert Holders for GPRB
Holder Kit, Pin (Spring-Loaded), Mini-Expanded Beam
Key A – GPRB– 1445162-1
Key B – GPRB– 2000189-1
FRONT HOLDER BLOCK
4
COMPRESSION SPRINGS
13.51 max.
(0.532 max.)
K
RETAINER BLOCK
12.05 (0.474)
12.01 (0.473)
K
27.00 (1.063)
26.96 (1.061)
SECTION
17.44 max.
(0.687 max.)
12.87 max.
(0.507 max.)
4-40 MACHINE SCREW
3
K-K
Ruggedized Fiber Optic Connectors
S
Holder Kit, Socket (Fixed), Mini-Expanded Beam,
Key A – GPRB –1445163-1
Key B – GPRB –2000190-1
HOLD DOWN PLATE
FRONT HOLDER BLOCK
K
4
13.51 max.
(0.532 max.)
12.05 (0.474)
12.01 (0.473)
27.00 (1.063)
26.96 (1.061)
SECTION
19.48 max.
(0.767 max.)
K
4.49 max.
(0.177 max.)
4-40 MACHINE SCREWS
K-K
S
3-27
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
ARINC 600 and 404 (Continued)
Insert Kits for GPRB
Holders
Rack and Panel Mini Insert Kits
Description
2 x 850 / 1300 nm Dual Multimode
2 x 1310 nm Singlemode
2 x 1550 nm Singlemode
4 x 850 / 1300 nm Dual Multimode
4 x 1310 nm Singlemode
4 x 1550 nm Singlemode
Part Number
1374759-3
1588839-3
1754622-3
1374759-1
1588839-1
1754622-4
Ferrule Kits
Fiber Hole Size
125 µm
126 µm
126 µm
Mode
SM
SM
MM
PRO BEAM Connector
Mini
Mini
Mini
Part Number
1754700-1
1754700-2
1754699-1
Comparative on Expanded Beam Inserts’ weight and Insertion Forces
when applied to an ARINC housing
Comparative on Expanded
Beam Inserts
■
ARINC 600 connector mated pair size 2 = 440 grams (without copper contacts)
■
ARINC style Mini and Junior size Expanded Beam inserts = 5 pounds insertion force each
when applied to the Rack and Panel ARINC Connector inserts
■
Signal Cavity Optical Holder insert (i.e.: holds up to six mini inserts with four fiber ball
lenses each or up to 24 fibers each insert set) = @ 30 grams
■
Power Cavity Optical Holder insert (i.e.: holds up to four mini inserts with four fiber ball
lenses each or up to 16 fibers each insert set) = @ 20 grams
■
Insert mated pair PRO BEAM Jr. Connector insert set = @ 41.79 grams
■
Insert mated pair Connector insert set = @ 16.17 grams
■
Fiber = single fiber ≤ 4 kg / km
■
Fiber = four fiber jacketed with a support member ≤ 24 kg / km
■
Static spring force per mated Expanded Beam insert pair = 5 lbs.
3-28
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Physical Contact & Technology
ARINC 801 Optical Termini
Product Facts
■
Optical termini for use with
GPR, ARINC 600, circular
MIL-DTL-38999 connectors.
■
Industry Standard 1.25 mm
ceramic ferrule
■
Compatible with 1.5-2.2 mm
Tight jacket and loose tube
cable construction:
■ MT - Tight jacket cable
■ ML - Loose tube cable
3
Ruggedized Fiber Optic Connectors
■
ARINC 801 Optical Termini
SM / MM versions
Materials
Housings — Nickel Plated Copper
Ferrule — Zirconia
Spring — Stainless Steel
Crimp Sleeve — Nickel Plated Copper
Protective Cover — Silicone
Optical Performance
Singlemode, 1310 nm/1550 nm
(UPC):
Attenuation, Mean — 0.15dB
Return Loss — > 50dB
Multimode, 850 nm/1310 nm:
Attenuation, Mean — 0.10dB
Return Loss — > 20dB
Mechanical / Environmental Performance
Test Description
Thermal Shock
ARINC 801 Optical
Termini in
GPR A & B
Connector
Standard
SAE-AS-13441
met 1003.1
TIA/EIA 455-20A
ARINC 801 Optical
Termini in
38999
Connector
ARINC 801 Optical
Termini in
ARINC 600
Connector
-55C /+100C
-55C /+100C
-55C /+100C
500h @ +100C
8h/axis
3.8g2/Hz
43 G rms
300 G - 3ms
500h @ +100C
8h/axis
3.8g2/Hz
43 G rms
300 G - 3ms
500h @ +100C
8h/axis
0.2g2/Hz
16.4 G rms
50G - 11ms
100 Cycles
N/A
100 Cycles
TIA/EIA 455-21A
N/A
500 Cycles
N/A
SAE-AS-13441
met 2002-1
SAE-AS-13441
met 1001.1 cond C
SAE-AS-13441
met 2009-1
10 Cycles
10 Cycles
10 Cycles
96 hr
500 hr
48 hr
68N
68N
68N
Humidity
(GPR/38999)
TIA/EIA 455-5
met B7A
10 cycles / 24h
90% RH
-25C/+65C
10 cycles / 24h
90% RH
-25C/+65C
N/A
Humidity
(ARINC 600)
TIA/EIA 455-5
met B
N/A
N/A
Altitude Imm.
TIA/EIA 455-15
10,000 ft
(69.6kPa)
10,000 ft
(69.6kPa)
Temperature Life
Vibration
TIA/EIA 455-11
Shock
Mate/Unmate
(GPR/ARINC 600)
Mate/Unmate
(38999)
Maint. Aging
Salt Spray
Cable Ret.
(1.8 mm)
TIA/EIA 455-14A
SAE-AS-13441
met 2016
10 cycles / 24h
90% RH
-25C/+65C
10,000 ft
(69.6kPa)
3-29
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Physical Contact & Technology (Continued)
ARINC 801 Optical Termini
Crimp Sleeve
26.5
Max.
[1.043]
(Continued)
There are three types of
ARINC 801 Optical Termini
available dependent upon
cable structure.
TE Connectivity has multiple
connector types/families available for the ARINC 801 Optical
Termini System.
0.05
Ø 3.33 +– 0.00
+ .002
[.131 – .000 ]
Connector
Sub-Assembly
ARINC 801 Optical Termini Part Numbers
These are:
■
■
■
General Purpose
Rectangular Connectors
■ F5 & F12 Inserts
MIL-DTL-38999 connectors
■ 13-04, 15-06, 21-16
ARINC 600
■ F12 combinations and F36
■
Quadrax Cavity Reducers
■
Motherboard &
Daughtercard Solutions
Cable Dia.
0.9mm Buffer
1.5 - 2.2 mm
1.5 - 2.2 mm
Cable Structure
ML (loose & tight)
MT (ultra tight)
—
ML
MT
S/M Fiber
125.3 µm
PC/UPC
*
1918614-1
1918615-1
For part numbers, details,
and / or additional connector
types and arrangements,
contact your local
TE Sales Representative.
M/M Fiber
128 µm
PC
*
1828199-1
1828200-1
Consult your local TE Sales Representative for additional options.
* Contact TE for availability.
Accessories
Dust Cap
100 Pc Bulk Pack
Part Number
1985335-1
1985335-2
ARINC 801 Cavity Reducers
Size 8 Quadrax
Part Number
Pin Quadrax adapter for ARINC 801 Optical 1757727-1
Termini in Quadrax FR type cavity
Pin Quadrax adapter for ARINC 801 Optical 1757710-1
Termini in Quadrax RR type cavity
Socket Quadrax adapter for ARINC 801
1757711-1
Optical Termini in Quadrax RR type cavity
Connector Options:
S/M Fiber
125.3 µm
APC
*
1918616-1
1918617-1
ARINC 801 Cavity Reducer
Quadrax cavity reducer (FR/FR) for receptacle shell
Quadrax cavity reducer (RR/RR) for receptacle shell
Quadrax cavity reducer (RR/RR) for plug shell
Cable Structure
Loose Structure
Tight Structure
Ultra Tight Structure
Yes
No
No
Yes
Yes
No
Movement between
fiber & 900 µm buffer
Movement between
900 µm & cable jacket
Adapters
Type
Version
ARINC 801 Optical Termini
to ARINC 801 Optical Termini
ARINC 801 Optical Termini
to ARINC 801 Optical Termini
ARINC 801 Optical Termini
to LC
ARINC 801 Optical Termini
to LC
ARINC 801 Optical Termini
to LC
Simplex
Bulkhead
Feedthrough Type
Simplex
Straight
Simplex
LC Panel Cutout
Duplex
LC Panel Cutout
Duplex
MIL-DTL-38999
Panel Cutout
Alignment
Sleeve
Part Number
Dim.
(page 3-32)
Ceramic Zirconia
1828996-1
Fig. 1
Ceramic Zirconia
1828997-1
Fig. 2
Ceramic Zirconia
1828979-1
Fig. 3
Ceramic Zirconia
1828980-1
Fig. 4
Ceramic Zirconia
1828995-1
Fig. 5
Tools
Description/Function
Metal Extraction Tool (M81 969/1-03)
Plastic Extraction Tool (M81 969/1403)
Daniels Right Angle Insertion Tool
Daniels Right Angle Removal Tool
Part Number
91066-3
M81969/14-03
DAK83-16*
DRK83-16*
* Contact Daniels Manufacturing Corporation
Note: All part numbers are RoHS compliant.
3-30
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Physical Contact & Technology (Continued)
F12 ARINC 801
Insert Assemblies
MATING FACE
12.05 (0.474)
12.01 (0.473)
27.00 (1.063)
26.96 (1.061)
INTERFACIAL
SEAL
FRONT HOUSING
29.95 (1.179)
29.15 (1.148)
REAR HOUSING
3
REAR GROMMET
Product Facts
ARINC 801 approved
■ Optical termini for use with
GPR, ARINC 600, circular
MIL-DTL-38999 connectors
■ Industry Standard 1.25 mm
ceramic ferrule
■ Compatible with 1.5-2.2 mm
tight jacket and loose tube
cable construction:
■ MT - Tight jacket cable
■ ML – Loose tube cable
■ Singlemode (SM) and
Multimode (MM) versions
■ ARINC 801 Optical Termini
part numbers:
1828199-1 MM/ML Version
1828200-1 MM/MT Version
1918614-1 SM/ML Version
1918616-1 SM/ML
Version-APC
1918615-1 SM/MT Version
1918617-1 SM/MT
Version-APC
Ruggedized Fiber Optic Connectors
■
REAR FACE
Insert Assembly, without Sleeve Holder,
Environmental, F12
Key A 1738805-1
Key B 1738806-1
MATING FACE
12.05 (0.474)
12.01 (0.473)
27.00 (1.063)
26.96 (1.061)
INTERFACIAL
SEAL
SLEEVE
HOLDER
FRONT
HOUSING
36.53 (1.438)
35.63 (1.403)
REAR
HOUSING
REAR
GROMMET
Materials:
Housings – Nickel Plated Copper
Ferrule – Zirconia
Spring – Stainless Steel
Crimp Sleeve – Nickel Plated Copper
Protective Cover – Silicone
REAR FACE
Insert Assembly, with Sleeve Holder,
Environmental, F12, Key A
GPRB
Key A 1738807-1
Key B 1738808-1
Optical Performance
Singlemode, 1310 nm/1550 nm (UPC)
Attenuation, Mean – 0.15dB
Return Loss - >50dB
Multimode, 850 nm.1310 nm
Attenuation, Mean – 0.10dB
Return Loss - >20dB
ARINC 801 Inserts
ARINC 801 Inserts and
Cavity Reducers accept
ARINC 801 Optical Termini.
Assembly Capabilities
TE Connectivity has
extensive Rugged Optic
Harness capabilities.
Please consult your local
TE Sales Representative
for assistance.
17F12Q2
36F36
12F5C2
20F12Q8
Note: All part numbers are RoHS compliant.
3-31
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Physical Contact & Technology (Continued)
ARINC 801 Optical Termini
Adapter Dimensions
Terminus to Terminus Bulkhead Feedthrough
Figure 1
Terminus to Terminus Straight
Figure 2
Terminus to LC Simplex
Figure 3
Terminus to LC Duplex, LC Panel
Figure 4
Terminus to LC Duplex, MIL-DTL-38999 Panel Cutout
Figure 5
3-32
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Physical Contact & Technology (Continued)
Most of the tools included in the Termination Kit are commonly used in the fiberoptic
industry (strippers, cutting pliers and all accessories for fiber and cable preparation).
The items in the table below are specially made for the ARINC 801 Optical Termini System.
Their use is highly recommended to achieve mechanical and optical performances.
Qty -1
1
1
2
1
1
1
10
5
10
15
1
—
—
1
1
5
10
1
1
1
1
1
1
1
—
—
—
1
Description
Label, Termination Kit
Insertion and Extraction Tool
1.25 mm Swab
LC Polishing Bushing
Polishing Plate
Polishing Pad
0.3 µm Polishing Film
Fine Diamond Polishing Film
5 µm Polishing Film
9 µm Polishing Film
Cleave Tool
Curing Oven Block
Curing oven
Resin injector tips
Resin injector
Epoxy, 353ND
Alcohol Fiber Wipe
Inner Ferrule Shaping Tool
Hexagonal key
Fiber Stripping tool (125 µm)
Handtool
Die-set, ARINC 801 Optical Termini
KEVLAR Shears
Cable Jacket Strip Tool
1.25 mm Microscope Adapter
200x Microscope
Carrying case, Weekender
Carrying case, Attache
Part Number
1918887-1
91066-3
1828355-1
1754074-1
501197-1
501523-1
228433-5
503887-1
228433-8
1374484-1
504064-1
1918510-1
502130-1
1918509-2
1918509-1
504035-1
501857-2
1918511-1
19840-5
1754708-1
58532-1
1828889-1
1278637-1
1278531-1
1754765-1
1754767-1
1918881-1
1918834-1
Item #
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
3
Ruggedized Fiber Optic Connectors
Qty -2
1
1
2
1
1
1
10
5
10
15
1
1
1
1
1
5
10
1
1
1
1
1
1
1
1
1
1
—
ARINC 801 Optical Termini
Termination Kit
Part Number 1828644-X
The following tools are necessary for product termination but are not included in the kit:
Alcohol, canned air, and clean cloth.
Other accessories available include ruler, tweezers, cleaning tip, roller adhesive tape, moss cable
support and permanent ink markers.
Tool Kit Contents
ARINC 801 Optical Termini
Service Tool Kit (Inspection,
testing & cleaning)
Part Number 1828335-1
ARINC 801 Optical Termini
Service Tool Kit
(Cleaning only)
Part Number 1828335-2
ARINC 801 Optical Termini
Service Tool Kit
(Testing only)
Part Number 1828335-3
ARINC 801 Optical Termini
Service Tool Kit
(Hand Held Digital Probe Kit)
Part Number 1828335-4
Item #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Comp Part Number
1278540-1
1754767-1
1754765-1
6374613-5
6374615-5
1918808-1
1918810-1
1828349-1
1828350-1
1828352-1
1828353-1
1828465-1
1918222-1
1918223-1
Description
Soft Carry Bag
200x Microscope
LC Microscope adapter
LC - SC 50/125 cable assembly
LC - SC 62.5/125 cable assembly
1.25 mm swab
OPTIPOP C Card Cleaner
Optical Loss Test Set
OLTS 1.25 mm detector cap
Visual Fault Locator
VFL 1.25 mm Adapter
Label, Service Kit
Inspection, Hand Held Digital Probe Kit
1.25 mm Adapter, Digital Probe
-1 inspection, cleaning & testing
-2 cleaning
-3 testing
-4 Hand Held Digital Probe Kit
-1
1
1
1
2
2
2
2
1
1
1
1
1
—
—
-2
—
—
—
—
—
2
5
—
—
—
—
—
—
—
-3
—
—
—
—
—
—
—
1
1
1
1
1
—
—
-4
—
—
—
—
—
—
—
—
—
—
—
—
1
1
KEVLAR is a trademark of E.I. du Pont
de Nemours and Company.
OPTIPOP is a trademark of NTT
Advanced Technology Corporation.
Note: All part numbers are RoHS compliant.
3-33
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Ruggedized Fiber Optic Products (Continued)
MIL-T-29504 Style Optical
Connector Range
Product Facts
■
Manufactured to meet
the requirements of
MIL-T-29504/4 and 5
■
Proven in both rotary and
fixed-wing aerospace
applications
■
Sprung loaded socket
contacts ensure consistent
pressure and performance
levels
The range of MIL-T style
optical contacts is designed
specifically for use with the
MIL-DTL-38999 Series III
connectors within the
standard size 16 cavity.
TE has designed a comprehensive range of Fiber ptic
inserts to further enhance
our EN4165 connector
Interchangeable modular inserts range. To date the modular
Easy use insertion / extraction
inserts can accommodate
tool
MC5, MC6 ribbon, Arinc 801
Easy access to optical contacts and EN4531 optical
contacts.
for cleaning maintenance
Compliments DMC-M multiway
modular connector range
Optical Inserts for EN4165
and ARINC 809
Product Facts
■
■
■
■
Fiber Optical Insert
for DMC-M
Product Facts
■
■
■
■
Light weight composite
Colour coded
Modularity
Screw coupling
RSC-v
Product Facts
■
Suitable for singlemode
applications
■
Good return loss
measurements
■
Tuneable PC variant for
optimum performance
An optical insert is available
for the popular DMC-M
connector which enables six
standard MC5 contact to be
incorporated into a single
insert package or 12 way
MC6 or 4 way Arinc 801
contacts.
APC version of the ever
popular RSC connector
range. The RSC-V is
available with either an
angled polish (APC) or a
tuneable physical contact
(PC) variant.
3-34
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Ruggedized Circular Connectors
38999
Product Facts
■
100% Scoop Proof
■
High strength Aluminium shells
■
Superior flourosilicone
seals provide maximum tear
resistance and sealing
memory
■
Threaded coupling with self
locking for anti-vibration
integrity
Military circular connector
qualified to MIL-DTL-38999,
Series III for fiber optic
MIL-T-29504 style termini.
Rugged design offers
maximum performance
for shock and vibration,
environmental, moisture
and corrosion resistance
and provides effective EMI
shielding.
3
Ruggedized Fiber Optic Connectors
3-35
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
MC3 MKII Fiber Optic Multiway Connectors
MC3 MKII Fiber Optic
Multiway Connectors
Product Facts
■
■
■
Insert-to-insert keying
assists precision alignment
Individually rear insertable/
removable optical contacts
enable easy assembly
Backshells and adaptors
available for most single
and multifiber cable types
General Specifications
Fiber type – Multi and Singlemode fiber
Ranging from 5 to 200um core diameters
Channels – 5, 8 and 12 Optical channels
Cable size – 1.5 mm to 3.0 mm outer
jacket
Materials
Shell – Aluminium; nickel plated
Aluminium; cadmium plate olive drab
Aluminium bronze (special order)
Contact body
Arcap – Titanium
Ferrule – Zirconia
Alignement sleeve – Zirconia
Seals – Fluorosilicone or nitrile
Plating – Aluminium, nickel plated
Aluminium, cadmium plate olive drab
Aluminium bronze (special order)
The MC3 range of high
performance connectors
incorporates individual
optical contacts inserted
from the rear.
The removable socket insert
allows for easy access to
the optical faces to aid
cleaning and maintenance.
The MC3 MkII range has the
same removable alignment
insert feature as the MC3 for
easycleaning (which can be
specified in either receptacle or plug), and is suitable
for use with most singlemode and multimode optical
fibres with core diameters
from 5 to 200µm. 5, 8 and
12 optical channels are
accommodated in the MILC-38999 Series III style
connector shells. The MC3
MkII connector range has
been tested and approved
for use in severe environments.
Optical Performance
Insertion loss - 0.25dB typical*
Return loss - 40dB typical*
Repeatability - Typically better than
0.1db with 50/125µm fiber
Environmental Specification
Temperature
High temperature endurance +155°C*
Low temperature endurance - 65°C*
Durability - Greater than 500 mating
cycles
Vibration
Sinusoidal - 5-3000Hz, 30g
Bump - 4000 bumps, 40g
Key Features
• Precision Zirconia ceramic
ferrules and alignment sleeves
ensure superior, repeatable
optical performance with physical
contact polishing techniques
• Insert-to-insert keying assists
precision alignment
• Colored band indicates full
mating
• Identical optical contacts are
spring loaded in both plug and
receptacle to maintain physical
contact even under severe shock
or vibration conditions (rigid
contact option available for
receptacle)
• Individually rear
insertable/removable optical
contacts enable easy assembly
• Simple termination process and
tooling
• Easily removable alignment
sleeve insert facilitates simple
cleaning and maintenance
• Backshells and adaptors
available for most single and
multifiber cable types
• MIL-C-38999 Series III antivibration coupling mechanism
and tri-start thread
• Alternative shell keyway
orientations provide protection
from inadvertent mis-mating
• Dynamic ‘0’ ring seal between
mating shells provides water
submersion capability
*fiber and polishing process dependent
3-36
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
MC3 MKII Fiber Optic Multiway Connectors (Continued)
Insert Arrangement
Size Arrangement
A
B1
B2
C1
C2
D
19-5
23-8
25-12
36.58
42.98
46.02
29.35
34.92
38.11
26.98
31.75
34.92
5
6.23
6.23
3.5
4
4
27.84
33.84
36.84
Thread E
Thread F tri-start
dimensions
(inches)
ØG
ØH
ØJ
ØK
ØL
M28 x 1.0
M34 x 1.0
M37 x 1.0
1.250
1.500
1.625
37.92
44.12
47.35
27.7
33.7
36.7
35.4
41.75
44.93
36.92
43.12
46.35
29.46
35.81
38.99
Dimensional Information
3
All dimensions in inches (except threads). To complete part number for ordering see ‘ordering information’
Plug
Ruggedized Fiber Optic Connectors
Procap
Receptacle
Dummy Receptacle
3-37
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
MC3 MKII Fiber Optic Multiway Connectors (Continued)
Optical Contacts (ordered
separately)
Optical contacts are supplied with a
profile formed optical end face and are
available for singlemode or multimode
fibers. Contacts are available in either
sprung or rigid versions, depending
upon application (rigid contacts should
be used in bulkhead receptacles only).
Optical Contacts (ordered separately)
Options are as follows:
***1 Optical hole Ø ‘A’ fiber size (see table 1)
**2 Cable type (see table 2)
Please note: for type 00 (**2) the cable crimp sleeve is not supplied i.e. for terminating
buffered fiber.
Table 1 (***1)
Rigid Contact
Part number
Part number
(singlemode)
(multimode)
455***-***1-**2
455***-***1-**2
455494-128-**2
455617-126-**2
455494-145-**2
455617-127-**2
455494-162-**2
455494-176-**2
455494-232-**2
455494-283-**2
455737-232-**2
Sprung Contact
Part number
Part number
(multimode)
(singlemode)
455***-***1-**2
455***-***1-**2
455500-128-**2
455500-128-**2
455500-145-**2
455500-145-**2
455500-162-**2
455500-176-**2
455500-232-**2
455500-283-**2
455500-1MM-**2
455738-232-**2
Table 2 (***2)
Contact Type
Rigid
Sprung
455494-***1-00
455500-***1-00
455617-***1-00
455616-***1-00
455494-***1-01
455500-***1-01
455617-***1-01
455616-***1-01
455494-***1-02
455500-***1-02
455617-***1-02
455616-***1-02
455494-***1-03
455500-***1-03
455617-***1-03
455616-***1-03
455494-***1-04
455500-***1-04
455617-***1-04
455616-***1-04
455500-1MM-00
455737-***1-00
455738-***1-00
Cable Type
Plain buffer
Tight jacket cable
900µm900µm
Ø2.5 OD
Ø2.5 OD
Ø1.8 OD
Ø1.8 OD
Ø3.0 OD
Ø3.0 OD
Ø2.1 OD
Ø2.1 OD
Ø2.2 OD
Ø1.5 OD
Crimp Dies (see note)
Part number
A/F
455608
1.64 / 1.74
455608
1.64 / 1.74
455608
3.10 / 3.12
455608
3.10 / 3.12
455608
3.10 / 3.12
455608
3.10 / 3.12
455608
3.56 / 3.48
455608
3.56 / 3.48
455608
3.10 / 3.12
455608
3.10 / 3.12
455697
2.62 / 2.72
455478
2.27 / 2.37
Crimp Sleeve
455610-01
455610-01
455610-02
455610-02
455610-03
455610-03
455610-04
455610-04
-
Please note: for alternative sizes, please consult technical sales.
Cable Type / Description
Multiway cable, with 900µm buffered fiber and peripheral strain relief
Multiway cable, various constructions - e.g. central strain relief
Cable Ø O/D mm
3.5
4.5
5.0
5.5
6.0
7.0
Backshells are
available for a range
of multiway cables,
please consult
technical sales
Please note: Crimp dies are used with crimp tool 451716 (Erma 29020).
3-38
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
MC3 MKII Fiber Optic Multiway Connectors (Continued)
Ordering Information
MC3
**E *
-*
-**-**
*
*
-F***
Series:
Style:
00 = Bulkhead receptacle
06 = Plug
07 = Jam nut receptacle
20 = Protective plug
30 = Dummy receptacle
40 = Protective cap receptacle
3
Ruggedized Fiber Optic Connectors
MkII:
2 for 00 Bulkhead receptacle, 06 plug
and 07 Jam nut Receptacle only.
Otherwise omitted
Shell finish:
N = Nickel plated
C = Cadmium plated olive drab
Shell size - no. of channels:
19-5, 23-8, 25-12
Insert type
P, S (S type includes the removable
alignment insert)
Shell orientation:
N, B, C, E, F and 'U' Universal
Modification code:
Example part numbers:
Connector MC300E2-N-19-5SN
Protective cap MC340E-N-19
Dummy receptacle MC330E-N-19
Accessories / Essential Tooling Information
For comprehensive tooling and consumable listing refer to technical sales.
Quality Approvals
• Civil Aviation Authority A8-1
• AS9100 Rev B (BSI)
• BS EN ISO 9001
• AS9120:2002 (BSI)
• Military Spec Approvals
38999
• EASA Part 21 Subpart G
(CAA)
• BS9000 and CECC
• BS9000 (BSI)
• Underwriters Laboratories
• Underwriters Laboratories
(UL)
• BS EN IS09001:2000 (BSI)
• BS/EN 9100:2003 (BSI)
• Military Spec Approvals
38999 (DSCC)
3-39
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
MC4 Series - Duplex Fiber Optic Connectors
MC4 Series - Duplex Fiber
Optic Connectors
Product Facts
■
■
■
Insert-to-insert keying
assists precision alignment
Individually rear insertable/
removable optical contacts
enable easy assembly
Backshells and adaptors
available for most single
and multifiber cable types
The MC4 Duplex optical
fiber connector is based
upon shell size 9 Mil-C
38999 Series III making this
an extremely compact
environmentally sealed
2-way connector. The MC4
is suitable for use with most
multimode and singlemode
fibers with core diameters of
9 to 200µm. Simplex and
duplex constructions can
be accommodated with
suitable connector
backshells.
Precision ceramic ferrules
and alignment sleeves
ensure optical performance
and reliability over an
extended service life.
The optical ferrules are
sprung loaded in both the
plug and receptacle shells.
This provides an axial load
equalization ensuring that
butt joint contact is
maintained even when the
connector is subjected to
vibration levels in excess of
30g.
This coupling nut is built in
antivibration clicker mechanism to prevent inadvertent
uncoupling under adverse
vibration conditions.
General Specifications
Optical
Attenuation – Less than 0-4dB
(50/125pm)
Repeatability – Better than 0.2dB
Fiber types – 50, 62.5, 85/125pm
100/140pm 200/280pm
Cable types
Tight jacket 2.5mm dia
Duplex 4.5mm OD
For other cable sizes consult Technical
Sales
Materials
Shell - Aluminium alloy. Nickel plated
Ferrule - Zirconia Alignment sleeve:
Zirconia
Seals - Fluorosilicone
Backshells - Aluminium alloy. Nickel
plated Mechanical
Temperature range -+65°C to
+155°C*
Quality Approvals
• Civil Aviation Authority A8-1
• BS EN ISO 9001
• Military Spec Approvals 38999
• Underwriters Laboratories (UL)
Backplane Module - PN 2000973-1
Daughtercard Module - PN 2000974-1
*Cable and epoxy dependant
Mechanical endurance: Not less than
500 matings
3-40
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
MC4 Series - Duplex Fiber Optic Connectors (Continued)
Ordering Information
MC4
**E-
*
-09-2
*
*
-***
Series:
Style:
00 = Bulkhead receptacle
06 = Plug
07 = Jam nut
Shell finish:
N = Nickel plated
C = Cadmium plated olive drab
3
Ruggedized Fiber Optic Connectors
Shell size - no. of channels – 09-2
Insert type – P Pin, S Socket
Shell orientation – N, A, B, C, D, E
Modification code
Example part number:Bulkhead Receptacle MC400E-C-09-2SN, Plug MC406E-C-09-2PN
MC4 Essential Tooling
Part No.
454335
453228
454342
454899
454539
454539
454481
454482
454483
454484
454257
450490
454297
454900-126
454900-141
454900-145
454900-283
Description and Use
Connector Assembly Tooling
Fiber stripping tool
Fiber cleaving tool
Crimp tool
Polishing Tools and Materials
Polishing jig
Rubber pads
Lapping film set comprises:
Coarse disk (10 off)
DR diamond disc
DM diamond disc
Polishing disc (10 off)
Consumable Materials
Epoxy kit (353ND)
Spatula
Syringe (x6)
Ferrules
Fiber size 125pm
Fiber size 140pm
Fiber size 140pm
Fiber size 280pm
Notes
Hozan
2 required
available separately
available separately
available separately
not supplied with connector
not supplied with connector
not supplied with connector
not supplied with connector
Note: Additional tooling may be required specific to cable types (consult technical sales)
For comprehensive tooling and consumable listing refer to technical sales
3-41
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
MC5 - High Density Fiber Optic Multiway
MC5 - High Density Fiber
Optic Multiway
Product Facts
■
■
■
Insert-to-insert keying
assists precision alignment
Individually rear insertable/
removable optical contacts
enable easy assembly
Backshells and adaptors
available for most single
and multifiber cable types
The MC5 high density range
is the very latest advance in
high performance multichannel fiber optic connectors, capable of sustained
performance over a wide
range of environmental
conditions. The MC5 uses
the most recent developments in precision ceramic
ferrules and lightweight
MIL-C-38999 Series III
connector shell materials,
combined with purpose
designed inserts to ensure
the optical performance
meets the requirements of
high reliability optical
systems. Compact sprung
loaded, precision optical
contacts are individually
insertable / removable for
ease of assembly.Extensive
testing has confirmed
excellent performance
under the most demanding
environmental conditions
with the MC5 chosen as the
standard multiway fiber
optic connector for the
European Fighter Aircraft,
Typhoon.
Key Features
• Color band indicates full mate
condition
• Extensive range including
1,2,4,6,8,10 and 30 way
connectors
General Specifications
Fiber type – Suitable for fibres with core
diameters 5-200um
Channels – 2, 4, 6, 8, 10, 18, and 30
channels
Cable size – 1.8 mm, 2.1 mm and
2.5 mm jacket
Materials
Shell – Composite (qualified to MIL-C38999)
Contact body – Arcap
Ferrule – Zirconia
Alignement sleeve – Zirconia
Seals – Fluorosilicone
Plating – Nickel plate
Optical Performance
Insertion loss - 0.25dB typical*
Return loss -40 dB typical
Repeatability - Typically better than
0.1dB (with 50/125µm fiber)
Environmental Specification
Temperature
High temperature endurance +150°C, 760 hours
Low temperature endurance -65°C,
500 hours
Durability - >1500 mating cycles
Vibration
Sinusoidal - 5-3000Hz, 40g, 10 hours
Random - 25-2000Hz, 5g2/Hz (50g
rms), 16 hrs
• Compact 1.25mm precision
zirconia ceramic ferrules
• Alignment sleeves ensure
superior, repeatable optical
performance with physical
contact polishing techniques
• Purpose designed inserts, and
insert-to-insert keying assist
precision alignment
• Identical optical contacts are
spring loaded in both plug and
receptacle to maintain physical
contact even under severe shock
or vibration conditions (rigid
contact option available for
receptacle)
• Available in both plug socket /
receptacle pin and plug pin /
receptacle socket configurations
• Simple termination process and
tooling
• Individually rear insertable /
removable optical contacts
enable easy assembly and
maintenance
• Composite lightweight, high
strength, corrosion resistant
connector shells
• Easily removable alignment
sleeve insert facilitates simple
cleaning and maintenance
• MIL-C-38999 Series III antivibration coupling mechanism,
and tri-start thread
*fiber and polishing process dependent
3-42
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
MC5 - High Density Fiber Optic Multiway (Continued)
Dimensional Information
All dimensions in inches (except threads). To complete part number for ordering see ‘ordering information’.
Plug
Procap
3
Ruggedized Fiber Optic Connectors
Receptacle
Dummy Receptacle
Dimensional Information (cont)
Size Arrangement
A
Max
B1
11-2
13-4
15-6
17-8
19-10
21-18
23-24
25-30
26.4
28.81
31.2
33.51
36.71
39.91
43.11
46.21
20.62
23.01
24.61
26.97
29.36
31.75
34.93
38.1
B2
C1
Min
C2
Min
Thread
D
Thread E tri-start
dimensions
(inches)
ØF
Max
G
Max
H
Max
M
Max
ØJ
Max
ØK
Max
ØL
Min
18.26
20.62
23.01
24.61
26.97
29.36
31.75
34.93
4.84
4.84
4.31
4.84
4.84
4.84
6.06
6.06
3.16
3.16
3.16
3.16
3.16
3.16
3.83
3.83
M15 X 1.0
M18 X 1.0
M22 X 1.0
M25 X 1.0
M28 X 1.0
M31 X 1.0
M34 X 1.0
M37 X 1.0
0.75000
0.8750
1.0000
1.1875
1.2500
1.3750
1.5000
1.6250
24.94
29.34
32.46
35.66
38.46
41.66
44.86
47.98
3.52
3.52
3.52
3.52
3.52
4.33
4.33
4.33
19.9
19.9
19.9
19.9
19.7
19.7
19.7
19.7
40.86
40.86
40.86
40.86
40.86
40.86
40.86
40.86
N/D
26.06
N/D
34.16
35.66
N/D
42.06
45.16
N/D
27.56
N/D
35.46
37.16
N/D
43.36
46.6
16.51
19.56
22.86
26.04
29.21
32.39
35.56
38.74
3-43
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
MC5 - High Density Fiber Optic Multiway
MC5 Optical Termini
(ordered separately)
Optical contacts are supplied with a
profile formed optical end face and are
available for singlemode or multimode
fibers. Contacts are available in either
sprung or rigid versions, depending
upon application (rigid contacts should
be used in bulkhead receptacles only).
Options are as follows:
***1 = Optical hole Ø ‘A’ (fiber size) (see table 1) **2 = Cable type (see table 2)
Please note: for type 00 (**2) the cable crimp sleeve is not supplied i.e. for terminating buffered fiber.
Table 1 (***1)
Sprung contact
part number
455335-***1-**2
455335-125-**2
455335-126-**2
455335-127-**2
455335-128-**2
455335-144-**2
455335-159-**2
455335-172-**2
455335-175-**2
Rigid contact
part number
455360-***1-**2
455360-125-**2
455360-126-**2
455360-127-**2
455360-128-**2
455360-144-**2
455360-159-**2
455360-172-**2
455360-175-**2
Table 2 (***2)
Contact
Sprung
Rigid
455335-***1-00
455360-***1-00
455335-***1-01
455360-***1-01
455335-***1-02
455360-***1-02
455335-***1-0
455360-***1-03
Contact
Plain buffer Tight jacket cable
900µm
Ø2.1 OD
Ø1.8 OD
-
Ø2.5 OD
Crimp Dies (see note)
Part number
A/F
457440
1.25 / 1.35
457440
2.27 / 2.37
457440
2.62 / 2.52 and
2.37 / 2.27
457440
2.74 / 2.84
Please note: for alternative sizes, consult technical sales.
MC5 Backshells for Multiway Cables (ordered separately)
Cable Type / Description
Multiway cable, with 900µm buffered fiber and peripheral strain relief
Multiway cable, various constructions - e.g. central strain relief
Cable Ø O/D mm
3.5
4.5
5.0
5.5
6.0
7.0
Backshells are
available for a range
of multiway cables,
please consult
technical sales
Please note: Crimp dies are used with crimp tool 451716 (Erma 29020).
3-44
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
MC5 - High Density Fiber Optic Multiway (Continued)
Ordering Information
MC5
**E-
*-
**-**
*
*
-F***
Series:
Style:
00 = Bulkhead receptacle
06 = Plug
07 = Jam nut
20 = Protective cap plug
30 = Dummy receptacle
40 = Protective receptacle
3
Ruggedized Fiber Optic Connectors
Shell finish:
N Nickel plated
Shell size - no. of channels:
11-2, 13-4, 15-6, 17-8, 19-10, 21-18,
23-24, 25-30
Insert type
P, S (S type includes the removable
alignment insert)
Shell orientation:
N, A, B, C
Modification code:
Example part numbers:
Connector MC500E-N-17-8SN
Protective cap MC540E-N-17
Dummy receptacle MC530E-N-17
Accessories / Essential Tooling Information
MC5 Fiber Optic Module for DMC-M Connectors
The MC5 DMC-M high performance fiber optic modules are manufactured from a high performance material for corrosion resistance
and features a rugged construction. The common MC5 optical contact is rigid or sprung loaded and common to both plug and
receptacle to maintain physical contact even under severe shock or vibration.
Quality Approvals
• Civil Aviation Authority A8-1
• AS9100 Rev B (BSI)
• BS EN ISO 9001
• AS9120:2002 (BSI)
• Military Spec Approvals
38999
• EASA Part 21 Subpart G
(CAA)
• BS9000 and CECC
• BS9000 (BSI)
• Underwriters Laboratories
• Underwriters Laboratories
(UL)
• BS EN IS09001:2000 (BSI)
• BS/EN 9100:2003 (BSI)
• Military Spec Approvals
38999 (DSCC)
3-45
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
MC6 - Fiber Optic Ribbon Cable Connector
MC6 - Fiber Optic Ribbon
Cable Connector
Product Facts
■
■
■
Insert-to-insert keying
assists precision alignment
Individually rear insertable/
removable optical contacts
enable easy assembly
Backshells and adaptors
available for most single
and multifiber cable types
The MC6 high density, fiber
optic connector series is
now further enhanced with
the option for industry
standard MT Ferrule inserts.
The insert accommodates 2
to 72 channels and can be
supplied pre-terminated if
required.The MC6 uses the
compact MIL-C-38999
Series III, shell size 11 body,
also used on the proven
MC5 connector. It has a
lightweight, corrosion
resistant, metal-plated composite shell which provides
high strength and durability,
combined with EMC shielding.
Key Features
• Color band indicating full mating
• Common contact single or
multimode MT ferrules
MIL-C-38999 Series III
anti-vibration coupling with
tri-start thread
• The use of industry standard MT
interface and a variety of housing
options ensures integration into
new and existing systems
The result is a very compact,
rugged, environmentally
sealed solution for a wide
range of applications, such
as avionics, data bus and
in-flight entertainment
systems.
Fiber Type:
Channels – 2 to 72
Cable size – Telecom grade cable
Aerospace grade cable
Materials
Shell – Composite (MIL-C-38999)
Contact body – Nickel/cadmium plated
composite polymer
Ferrule – Thermoplastic
Alignment Pin:
Seals – Fluorosilicone
Plating – Nickel
• Easily accessible Angled
Physical Contact (APC) and
Physical Contact (PC) faces for
cleaning and maintenance
• Interchangeable with
MIL-C-38999 Series III
• Rear release contact using size 8
extraction tools Retrofit triple rear
seal available
3-46
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
MC6 - Fiber Optic Ribbon Cable Connector (Continued)
Optical Performance
For more information contact technical sales on +44 (0) 1424 858358 or fiber@deutsch.net
Dimensional Information
All dimensions in millimeters unless otherwise stated. To complete part number for ordering see Ordering Information.
MC6 Receptacle
Protective Cap Receptacle MC640E-N-11
0.14
3.61 MIN.
E
THREAD F
B
A
C
V
3
U
Ruggedized Fiber Optic Connectors
G
H
D2
D1
5
127 LONG
CORD
Procap Plug MC620E-N-11
THREAD F
T
J
E
S
MC6 Plug
K
0.83
21.1
MAX.
CORD
5
127 LONG
Protective Cap Receptacle
Jam Nut
M A/F
V
E
THREAD F
W
AB
U
AA
N
P
R
L
CORD
5
127 LONG
Dummy Receptacle MC630E-N-11
Z
THREAD E
A
C
B
Y
D2
D1
3-47
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
MC6 - Fiber Optic Ribbon Cable Connector (Continued)
Contact and Tooling Information
A
Max
26.40
M
A/F
27
B
Nom
20.62
N
Max
32.00
C
Nom
18.26
P
Max
22.30
D1
Min
4.84
R
Max
2.96
D2
Min
3.16
ØS
Min
19.55
ØE
Max
17.10
ØT
Max
23.46
Thread F
Tri-start (inches)
0.7500”
U
Max
16.16
MC6
Ordering Information
ØV
Max
22.96
**E
G
Max
23.20
ØW
Min
22.86
-*
H
Max
46.50
ØX
Max
8.01
-11-
ØJ
Max
24.95
Y
Max
2.76
K
Max
46.00
L
Max
47.50
AA
Max
7.80
AB
Max
4.81
Z
Max
23.76
**
*
-F**
Series:
Modifaction code:
See above
Style:
00 = Bulkhead receptacle
06 = Plug
07 = Jam nut
Shell orientation:
N,A,B,C
No. of MT Ferrules:
01 for size 11
Shell finish:
N Nickel plated
C = Cadmium plated
Shell size:
11
Optical Termini
MC6 - 12 SM - 01- P
X
Contact type
No. Chanels
Ferrule Type
SM - Singlemode
MM - Multimode
MC6 MT contact
Ferrule Type
P - Pin (With Pins)
S - Socket (No Pins)
See Table
Cable Types Ref. Table
Cable
Part No.
Description
Jacket Size
MC6 - ** ** - 01*
Ruggedized
3.95mm x
Aerospace Oval 1.60mm Max.
Multi Fiber Cable
MC6 - ** ** - 02*
Round Multi
Ø3.96mm
Fiber Cable
Max.
Accessories / Essential Tooling Information
MC6 Fiber Optic Module for DMC-M Connectors
The MC6 DMC-M high performance fiber optic modules are manufactured from a high performance material for corrosion
resistance and features a rugged construction. The common MC6 optical contact is rigid or sprung loaded and common to both
plug and receptacle to maintain physical contact even under severe shock or vibration.
Quality Approvals
• Civil Aviation Authority A8-1
• AS9100 Rev B (BSI)
• BS EN ISO 9001
• AS9120:2002 (BSI)
• Military Spec Approvals 38999
• EASA Part 21 Subpart G (CAA)
• BS9000 and CECC
• BS9000 (BSI)
• Underwriters Laboratories
• Underwriters Laboratories (UL)
• BS EN IS09001:2000 (BSI)
• Military Spec Approvals 38999
(DSCC).
• BS/EN 9100:2003 (BSI)
3-48
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
MC801 Connector
MC801 Connector
Product Facts
■
■
■
■
■
IN
DEVELOPMENT
3
Ruggedized Fiber Optic Connectors
■
Uses precision ARINC 801
fiber optic termini (typical
multi-mode insertion loss is
less than 0.15 dB).
Removable alignment
sleeve insert for easy
cleaning of fiber optic
termini
Three stages of alignment:
shell-to-shell keys, guide
pins and ceramic alignment
sleeves
Includes all of the features
of standard D38999 straight
plug and panel mount
receptacle shells
Scoop-proof connector
design
Option for alternate keys
and keyways
Insert Arrangements
11-02 13-04 15-06 17-08
19-12 21-16 23-24 25-32
Materials
Composite and Aluminium
Finishes
Electroless Nickel and Olive drab
cadmium
A801 Termini
• Genderless termini allows for use
on both sides of a connector
• The Alignment sleeves are
contained in a separate carrier
which is removable for easier
end-face maintenance
• Ultra Precision ceramic ferrules
and sleeves ensure accurate
fiber-to-fiber alignment
• Termini are keyed to provide
anti-rotation
• Termini body is crimped to the
cable providing a Pull-Proof
solution
Performance expected
• Insertion Loss at 850 Nm 0.30 dB
max., 0.15 dB typical for multimode
• Return Loss 850 Nm –20 dB max
– 40 dB typical multi-mode
3-49
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Ruggedized Singleway Connector (RSC)
Ruggedized Singleway
Connector (RSC)
Product Facts
■
■
■
Insert-to-insert keying
assists precision alignment
Individually rear insertable/
removable optical contacts
enable easy assembly
Backshells and adaptors
available for most single
and multifiber cable types
Fiber Type – 8, 50, 62.5, 85/125µm
100/140µm
200/230µm
200/280µm
200/300µm
Cable size – 1.6mm to 5mm
Simplex tight jacket Kevlar reinforced
secondary buffered fiber
TE’s RSC range of high
performance fiber optic
connectors are manufactured from Arcap for corrosion resistance and feature
a rugged construction,
incorporating environmental
sealing and an anti-vibration
coupling mechanism. The
optical contact is sprung
loaded and common to both
plug and receptacle to
maintain physical contact
even under severe shock or
vibration. The RSC range is
suitable for both singlemode
and multimode applications,
and features easily accessible fiber faces for cleaning
purposes.
Materials
Key Features
Shell – Arcap
Contact body – Arcap
Ferrule – Zirconia
Alignment sleeve – Zirconia
Seals – Fluorosilicone
Plating – Nickel
• Precision Zirconia ceramic
ferrule and alignment sleeve to
ensure superior repeatable
optical performance with physical
contact polishing techniques
Optical Performance
• Manufactured from Arcap for
corrosion resistance
Insertion loss – 0.25dB typical
Return loss – -40dB typical*
Repeatability – Better than 0.2dB
• Easy access to ferrule to facilitate
simple cleaning and maintenance
Temperature
High temperature endurance –
+155°C*
Low temperature endurance –
-65°C*
Durability – not less than 500
matings
• Anti-vibration coupling
mechanism
• Six alternative shell keyway
orientations provide protection
from inadvertent mis-mating
• Able to accommodate various
sizes of multimode and
singlemode fiber - (8/125,
50/125, 62.5/125, 100/140,
200/280mm)
• Common ferrule carriers for the
plug and receptacle
• Able to accommodate various
sizes of simplex cable (1.6mm 5mm)
• Optical contact is sprung loaded
in both the plug and receptacle to
maintain physical contact even
under severe shock or vibration
• Compatible with HA Connector
series
• Simple termination process and
tooling
3-50
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Ruggedized Singleway Connector (RSC) (Continued)
Dimensional Information
All dimensions in inches (except
threads). To complete part number for
ordering see ‘ordering information’
Free Receptacle
Plug
3
Ruggedized Fiber Optic Connectors
Receptacles
Jam Nut Receptacle
Dummy Receptacle
Dummy Receptacles and Mounting
Procap
3-51
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Ruggedized Singleway Connector (RSC) (Continued)
Ordering Information
RSC
**E-
*
-***
Series:
Shell style:
00 = Bulkhead receptacle
06 = Plug
07 = Jam nut
20 = Protective cap plug
30 = Dummy receptacle
40 = Protective receptacle
3
max.
100 cable diameter 2.5mm O/D
180 cable diameter 1.8mm O/D
200 cable diameter 2.0mm O/D
300 cable diameter 1.65mm O/D
400 cable diameter 3.0mm O/D
500 cable diameter 3.2mm O/D
600 cable diameter 2.1mm O/D
700 cable diameter 1.6mm O/D*
800 cable diameter 3.7mm O/D
900 cable diameter 5.0mm O/D
Shell orientation:
N, A, B, C, D, E
*Special glass braid
For other cable types, please consult the
sales office.
Example part number: RSC06E-N-100
RSC plug, ‘N’ orientation, 2.5mm cable
Optical Contacts
Accessories
(Must be ordered seperately)
Mode
Singlemode
Multimode
Fiber size
8/125µm
50, 62.5/125µm
100/140µm
100/172µm
200/220µm
200/230µm
200/280µm (flat faced)
200/300µm
Part number
456099SM-126
456099-126
456099-145
456099-176
456099-224
456099-232
454103-283
453800-305
Fixing
4 hole
2 hole
Jam nut
Dummy
receptacle
part number
RSC30E
RSC35E
RSC37E
Protective
cap part
number
RSC40E
RSC47E
Plesae contact technical support for termination tools and consumables.
Dimensional Information
Hermetic Receptacle
(RSC07HE)
All dimensions in inches (except
threads). To complete part number for
ordering see ‘ordering information’
Key Features
• Compatible with the RSC plug connector
• Leak rate < 1x10-6 cc/s
• 125ºC temperature rating
Ordering Information
RSC07HE
Series:
Shell orientation - N, A, B, C, D, E
Fiber size - 125, 140, 280µm
Pigtail length - cms
Example part number: (pigtail cable
900µm buffer only)
RSC07HE-N-283-100 receptacle,
pigtail, ‘N’ orientation, 280µm fiber,
100cm cable
-*
-***
-***
Quality Approvals
• Civil Aviation Authority A8-1
• AS9100 Rev B (BSI)
• BS EN ISO 9001
• AS9120:2002 (BSI)
• Military Spec Approvals 38999
• EASA Part 21 Subpart G (CAA)
• BS9000 and CECC
• BS9000 (BSI)
• Underwriters Laboratories
• Underwriters Laboratories (UL)
• BS EN IS09001:2000 (BSI)
• Military Spec Approvals 38999
(DSCC)
• BS/EN 9100:2003 (BSI)
3-52
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Sealed Circular LC ODVA
Plug Part Numbers:
1828618-1 (Multimode)
1828618-2 (Singlemode)
Sealed Circular LC ODVA
Conforming Connector
Product Facts
■
IP67 rated to ensure
protection from dust and
water immersion
■
LC connector qualified to
Telcordia GR-326 and
TIA/EIA 568B.3
Temperature range of
–40°C to 85°C
■
Bayonet-style mechanical
lock
■
Flame retardant materials
per UL 94 V-0
■
Dual mounting bulkhead
design
■
Singlemode and multimode
fiber
■
Can be used with cable
types 9/125, 50/125 and
62.5/125
■
LC to LC internal to the box
Jumpers
■
LC connector accepts
tactical cable with 4.5 mm –
7.5 mm OD
■
ODVA Conforming Plug to X
interface on tactical with
break out
■
ODVA Conforming Plug to
Plug on tactical cable
■
Build to customer need
Plug & Receptacle Cap
Part Numbers:
Plug Cap
1828740-1
Receptacle Cap 1918177-1
3
Ruggedized Fiber Optic Connectors
■
Receptacle Part Numbers:
1828619-1 (Multimode)
1828619-2 (Singlemode)
Applications
The LC ODVA Conforming
Connector is ideal for:
■
Harsh environments where
chemicals, corrosive gases
and liquids are
commonplace
■
Inside and outside industrial
plant and equipment that
interface with industrial
Ethernet networks
■
Remote interface
applications such as towers
and antennae as well as
FTTX in PON and at the
home applications
■
Standard Cable Assemblies
Part Number
1828935-X
1828936-X
Description
ODVA LC Interface, 62.5, 2 Fiber
ODVA LC Interface, Singlemode, 2 Fiber
Note: X = length in meters
Mobile routers and
internet hardware
Note: All part numbers are RoHS compliant.
3-53
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Rugged Circular Connectors
EMPIRE
Product Facts
■
Facilitates the implementation
of fiber sensors within
composites
■
Protection of fiber at
composite entry/exit point
■
Receptacle connector
physically embedded within
composite material
■
Available as panel edge or
surface mount configuration
Fiber Optic Cable
Assemblies and Harnesses
Product Facts
■
Custom designs available
■
Custom lengths for
harnessing
■
Dedicated Fiber Optic
harness facility
■
Capability to work closely
with customer to fully define
requirements
A unique, patent pending
Fiber Optic connector
technology that allows
designers to reliably
connect embedded optical
fibers to external monitoring
equipment, eliminating the
problems of fixed ‘flying
lead’ connections to the
structure. See TE.com for
additional information.
TE also has dedicated
design and manufacturing
resources available to
provide rugged and reliable
Fiber optic harnesses for
Aerospace, Military
communications, Railways,
Autosport and Industrial
equipment.
3-54
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Rugged Board Level Connector
Ruggedized Optical
Backplane Interconnect for
VITA 66
Product Facts
■
■
■
■
■
■
■
Mechanical
Mating Force (per 12-fiber
MT ferrule) – Min: 7.8N [1.75 lb]
Max: 11.8N [2.65lb]
Durability – 100 cycles, tested per
EIA-455-21
Shock – 50G, sawtooth, 11 msec pulse
duration, tested per TIA/EIA-455-14,
condition E
Random Vibration – 11.95 G (rms),
50-2000 Hz, 2 hrs per plane - tested per
TIA/EIA-455-11, test condition V1-D
interconnect is fedthrough
the backplane to removable
system modules using MT
ferrules.TE offers the optical
system in both a receptacle
(backplane) and matingplug
(daughtercard) connectors
which interconnect up to two
MT ferrules,each accomo-
dating up to 24 fiber paths.
Other options are available
using industry standard
ARINC 801 fiber terminus
and TE’s Expanded Beam,
Pro Beam interface in a
four-fiber configuration.
3
Key Features
• Receptacle designed to maximize
optical performance
• Connectors accommodate up to
two MT ferrules
• Locating post features helps
ensure proper position on the
backplane and module boards
• Common protective cover is
made of anti-static material
Interface
VITA 66.1: MT
MT Ferrule Kit
(12 Fiber, Multimode)
• Plug (daughtercard) connector
housing contains a slot feature to
facilitate cleaning the MT
interfaces
Ruggedized Fiber Optic Connectors
■
Receptacle designed to
maximize optical
performance
Connectors accommodate
up to two MT ferrules
Locating post features helps
ensure proper position on
the backplane and module
boards
Common protective cover is
made of anti-static material
Plug (daughtercard)
connector housing contains
a slot feature to facilitate
cleaning the MT interfaces
Receptacle (backplane)
connector includes two
robust guide pins for blindmating
Receptacle connector insert
floats relative to the shell,
providing ±0.25mm planar
floating alignment
capability
Connector mounting screws
contain pre-applied Nylok
patch to withstand vibration
TE Connectivity’s (TE)
Ruggedized Optical
Backplane interconnect
system provides a high-density, blind-mate optical
interconnect in a backplane/daughtercard
configuration. The fiber
optic (ribbon) cable
• Connector mounting screws
contain pre-applied Nylok patch
to withstand vibration
• Receptacle (backplane)
connector includes two robust
guide pins for blind-mating
• Receptacle connector insert
floats relative to the shell,
providing ±0.25mm planar
floating alignment capability
Part No.
Backplane
Daughtercard
2000973-1
2000974-1
2102866-1
2102866-2
Materials
Connector shell & housing –
Aluminum alloy 6061, clear-chromate
conversion-coated (RoHS compliant)
Alignment posts & screws –
Stainless Steel, 300 series, passivated
(RoHS-compliant)
Backplane Module - PN 2000973-1
Daughtercard Module - PN 2000974-1
3-55
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Navy CID Approved Epoxy Applied
Tight Jacketed
LC Connectors
Product Facts
■
Multimode or singlemode
■
Simplex or duplex
■
Tested using MIL-PRF85045/16 2.0 mm cable
■
LC Commercial Item
Description (CID) interim
approval by the Naval
Surface Warfare Center,
Dahlgren Division
Application
■
In Flight Networks
■
Shipboard Applications
■
Aero Market
The tight jacketed LC
Connectors are non pullproof versions of the standard connectors that are
designed for use with tight
construction cable. Unlike
standard connectors, this
design allows the jacket
and buffer to move together,
reducing the chances of
micro-bends and fiber
breakage.
Boot, Bend Limiting
The Tight Jacket LC
Connector is a robust
design for rugged
applications including but
not limited to:
■
Extreme temperatures -55°C
to +110°C
■
Excessive vibration or
physical shock
52.0
Ref.
[2.05]
Crimp Eyelet /
Heat Shrink Assembly
Test reports available upon request.
Connector Sub Assembly
Fiber Type
Singlemode
(blue body & straight boot)
Multimode
(beige body & straight boot)
Kit Part Number
6828095-X
6828130-X
1918228-X
2123524-X
6828094-X
6828129-X
1918153-X
2123265-X
Description
Simplex, 1.6–2.0 mm
Duplex, 1.6–2.0 mm
Simplex, 2.4 mm
Duplex, 1.6–2.0 mm , transceiver optimized
Simplex, 1.6–2.0 mm
Duplex, 1.6–2.0 mm
Simplex, 2.4 mm
Simplex, 2.4 mm , transceiver optimized
Note: X = -1 for individual package, -2 for bulk package.
Instruction Sheet 408-10014. See http://www.te.com/documents.
Duplex Clip Available (Part Number 1754371-1).
Note: All part numbers are RoHS compliant.
3-56
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
SC Connectors
Tight Jacketed SC
Connectors
Product Facts
■
Multimode or singlemode
■
Simplex or duplex
■
Tested using MIL-PRF85045/16 2.0 mm cable
■
SC Commercial Item
Description (CID) interim
approval by Naval Surface
Warfare Center, Dahlgren
Division
■
In Flight Networks
■
Shipboard Applications
■
Aero Market
3
standard connectors, this
design allows the jacket
and buffer to move together,
reducing the chances of
micro-bends and fiber
breakage.
Ruggedized Fiber Optic Connectors
Application
The tight jacketed SC
Connectors are non pullproof versions of the standard connectors that are
designed for use with tight
construction cable. Unlike
Boot, Bend Limiting
56.9
[2.24]
Crimp Eyelet /
Heat Shrink Assembly
Connector Sub Assembly
Tight Jacketed SC Connector Kits
Fiber Type
Singlemode
(blue body & straight boot)
Multimode
(beige body & straight boot)
Kit Part Number
6828100-X
1828573-X
1918227-X
6828099-X
1828574-X
1918154-X
Description
Simplex, 1.6–2.0 mm
Duplex, 1.6–2.0 mm
Simplex, 2.4 mm
Simplex, 1.6–2.0 mm
Duplex, 1.6–2.0 mm
Simplex, 2.4 mm
Note: X = -1 for individual package, -2 for bulk package.
Instruction Sheet 408-10015. See http://www.te.com/documents.
Note: All part numbers are RoHS compliant.
3-57
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
LC Plus — Navy Approved
LC, SC and LightCrimp Plus
ST Approved by U.S. Navy
for Use On Board Ships
LightCrimp Plus ST Fiber
Optic Connector Features
and Benefits:
■
LightCrimp Plus technology
delivers the ability to
terminate the fiber optic ST
connector with mechanical
tools by the ferrule being
factory polished and
terminated to the connector
body
■
The mechanical process
enables a simple strip,
clean, cleave crimp process
that improves process time
and eases the complexity of
the installation
Termination Kits:
■
The LightCrimp Plus MM ST
part 2064757-1 has a
dedicated termination kit,
part number 2064764-1,
suggested for its implementation. TE provides a
wide variety of tools
required to prepare and
terminate LightCrimp Plus
ST connectors.
Whether you’re designing
local area networks, communications systems or
equipment, innovative fiber
optic applications begin
with innovative fiber optic
products. TE Connectivity
offers a complete line of
fiber optic products to help
your designs make light
work for you.
TE’s comprehensive fiber
connector line delivers
virtually all industry-standard
connections, including
LightCrimp Plus ST-Style
and epoxy applied Tight
Jacketed LC and SC and
many others. They bring
fiber to the desk at a cost
that is competitive with
copper.
LightCrimp Plus ST Fiber Optic
Connectors
TE LightCrimp Plus ST-Style
connectors are available
in single or multimode
configurations and can be
crimped to the fiber. Any,
they can install in under two
minutes, without epoxy.
TE recently obtained
approval from the U.S. Navy
for its Multimode LightCrimp
Plus ST Connector. This
connector has been added
to the “Navy Recommended
Fiber Optic Components
Parts List” located at
https://fiberoptics.nswc.navy.mil/,
and is currently listed under
the TE part number
(2064757-1). In addition,
it is listed under the CID
number A-A-59917. This
approval is the latest in this
series and joins the
approved status of the LC
and SC tight construction
epoxy optic connectors
listed on the components
parts list.
LightCrimp Plus ST
* Commercial Item Description
3-58
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
LC Plus — Navy Approved (Continued)
Combination
LIGHTCRIMP PLUS
SC/ST/LC Termination Kit
Part Number 1985162-1
3
Ruggedized Fiber Optic Connectors
Note: All part numbers are RoHS
compliant.
3-59
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
LightCrimp Splice
Product Facts
■
Terminates 250 µm coated,
900 µm tight-buffered fibers
and 2.0 mm jacketed cable
■
Attenuation (typical):
≤ 0.1 dB
■
Return Loss (at ambient;
18°–28° C):
≥ 20 dB multimode
≥ 35 dB single-mode
■
Operating Temperature:
-25 to 70° C
■
Storage Temperature:
-40 to 85° C
■
Tensile retention:
250 µm coated: 2.0 N
900 µm buffered: 3.0 N
Jacketed:
50.0 N
■
Fast, easy fiber splicing
■
No epoxy required
■
No set-up required
■
No workstation required
■
Ideal for low-fiber count
cables
■
Same LightCrimp Splice for
single-mode and multimode
125 µm diameter fibers
■
Kit includes rugged case
LightCrimp splices provide
rugged, miniaturized
form-factor that assures
consistent crimp quality,
dependability, and performance that rivals fusion
splices. LightCrimp splices
have been tested in accordance with IEC 61300 procedures, with an operating
temperature range extending from -25° C to +70° C.
LightCrimp splices have
been designed to meet TIA
568-C.3, IEC 61753 Cat U,
and EN optical requirements.
Navy approved CID
commercial item.
Description #A-A59917
LightCrimp splices provide
the proven performance
based on technology used
to install more than one
million LightCrimp Plus
connectors.
Description
LightCrimp Splice for 250 µm,
900 µm and 2.0 mm Jacketed Cable
LightCrimp Splice Termination Tool Kit
Part Number
1985368-1
2064764-1
LightCrimp PLUS Kit
Part Number 1985801-1
Capable of terminating:
In Line Mechanical Splice
Part Number 1985368-1
and LightCrimp PLUS
LC/SC
Part Numbers:
2123277-1 & -2 Simplex MM LC
2123278-1 & -2 Duplex MM LC
2123279-1 Simplex SM
2123280-1 Duplex SM
3-60
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Ruggedized Fiber Optic Connectors
Offshore Optical Connectors and Cable Assembly
9316 Optic
Product Facts
■
Dry Mate connection
■
Explosion proof area
■
Multiway up to 12 FO
■
Operating pressure up to
40 bar
9316 series has been
designed to withstand the
most severe environments
in marine and offshore
applications.
A special care was taken
concerning:
■
Easy handling
Mechanical stress
■
Single or Multimode fibers
can be combined
■
■
Use in polluted environments
■
Backshell custom design
available
■
Use in harzardous areas
■
Hybrid product 4 FO and 4
copper contacts
■
SplashZone connector
■
Operating pressure up to
80 bar
■
Single or Multimode fibers
can be combined
MOD
Product Facts
■
Explosion proof area
■
SplashZone connector
■
Multiway up to 8 FO
■
Operating pressure up to
40 bar
■
Single or Multimode fibres
can be combined
DO3000
Product Facts
■
Optical Subsea Wet
Mateable
■
ROV, Bulkhead, Stab plate
and Diver versions
■
Custom design available
■
Back Reflection
工商网监
湘ICP备2023018690号