ZPF000000000100074

DEUTSCH FDBA/HDBA Series Standard UTE 93422 HE302, HE303, NFL54130 and EN3646 Rugged Bayonet Connector Designed for Aerospace and Harsh Environment AEROSPACE. DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 FDBA/HDBA Series CONTENTS Introduction 04 Synoptic 05 Technical Characteristics 06 Part Numbering System 08 Key Orientation 10 Arrangements 11 Receptacles 12 Hermetic Receptacles 20 Plugs 22 Mating and Unmating Dimensions 25 Protective Covers 26 Accessories 27 Dummy Receptacle for Plugs 27 Panel Seal 28 Contacts 29 AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 3 FDBA/HDBA Series Standard UTE 93422 FDBA/HDBA Series HE302, HE303, NFL54130 and EN3646 Synoptic Introduction Accessories Plugs Receptacles Accessories 4 Screw Square / Box Mounting 4 2 5 3 1 A451 A451 Lightened Nut 50 Flat Gasket Lightened Nut 6 A285 Nut 56 1. Triple wire sealing. 2.  I nterfacial seal ensured by compression of insert and static/dynamic seal. 3. A285 Round Nut Box Mounting Nut 54 C  ontacts individual sealing at coupling stage by compression of elastomer conical risers on hard insert. 4. A  nti-friction washers for constant mating force. 5.  I nsert to shell sealing with potting. 6. C  onnector rear part fitted with a teeth anti-rotation system assuming an effective tightening and clamping. 059 Straight Cable Clamp With Earth Continuity 059 Straight Cable Clamp 081 Elbowed Cable Clamp Hermetic Receptacle 57 4 Screw Square Box Mounting 50H 58H 1. Bayonet coupling 2. B  lack Anodize, Nickel or Cadmium plated Aluminium shells. Hermetics are Nickel plated steel. Other plating options are available based on request. 3. S  ilicone elastomer and thermosetting resin insert. Silicone elastomer and sintered glass for hermetic. 4. R  oHS (Restriction of Hazardous Substances)/REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) Compliant Black EN plating version option available in Aluminium shell. 5. 081 Elbowed Cable Clamp C  rimping contacts size 20, 16 and 12. 7. S  older contacts hermetic shells. 8. C  ontacts for printed circuit available in sealed and hermetic shells. 9. B  ack silicone insert on each wire to accept the new generation of aeronautic cables. Flat Gasket 50H A276A Round Nut Box Mounting G  ain in weight (25%) and overall dimension (23%) compared to NAS 1599 connectors. Gain in weight (50%) for aluminium hermetic version compared to steel and stainless steel hermetic version. 6. 4 Screw Square Box Mounting Pin Contacts 54H Protective Cap for Receptacles DBAC 50 * Protective Cap for Plugs DBAC 56* Soldered Box Mounting 53H DBAC 56-54* 10. 9  sizes of shells and 27 arrangements available. Dummy Receptacles DBAC 50-54 * 50PR DBAC 56-56* * represents shell size AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 4 AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 5 FDBA/HDBA Series FDBA/HDBA Series Technical Characteristics MECHANICAL ELECTRICAL •S  hell: Material: Sealed version: Aluminium alloy Hermetic version: Stainless Steel Plating: Black Anodize, Nickel, Cadmium or REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals)/RoHS (Restriction of Hazardous Substances) Compliant Black EN. • Withstanding Voltage: At sea level:  - Service 1 - 1500 V eff. 50Hz - Service 2 - 2300 V eff. 50Hz • Insert: Material: Sealed version: Thermosetting, elastomer Hermetic version: Sintered glass insert •F  luid Resistance: (in accordance with BES/SST/ELC/321/Prod. and MIL-C-26482). Skydrol oil, JP5 fuel, Engine Oils and Hydraulic Fluids •P  ressure Resistance: Hermetic version: Up to 70 bars. Consult us for other pressure requirements • Contacts: Material and Plating: Sealed version: Copper alloy – Gold over nickel Hermetic version: Ferrous alloy - Gold over nickel + 1.3 Solder type- 0 + 1.3 Contact Retention: Sealed version: -0 + 1.3 - Size 20 - 9 - 0 daN - Size 16 - 11 daN - Size 12 - 11 daN •S  ervice Voltage: Sealed Version:  - Service 1 - 500 V eff. 50Hz - Service 2 - 750 V eff. 50Hz Hermetic Version: 500 V eff. 50 Hz • Insulation Resistance: Sealed Version: ≤ to 5000 MΩ to 25°C and 60% HR Hermetic Version: ≥ to 5000 MΩ to 25°C and 60% HR •C  ontacts Maximum Current: Sealed and Aluminium Hermetic Version: - Size 20 : 7.5 A max. - Size 16 : 13 A max. - Size 12 : 23 A max. Stainless Steel and Steel Hermetic Version: - Size 20 : 5 A max. - Size 16 : 10 A max. - Size 12 : 17 A max. •C  ontact Resistance: Sealed and Aluminium Hermetic Version: - Size 20 : 3 mΩ under max intensity - Size 16 : 2 mΩ under max intensity - Size 12 : 1.5 mΩ under max intensity Stainless Steel and Steel Hermetic Version: - Size 20 : 21 mΩ under max intensity - Size 16 : 14 mΩ under max intensity - Size 12 : 11 mΩ under max intensity • Vibrations: In accordance with MIL-STD 202 method 204, condition B •P  hysical Shocks: Sealed Version: 100g 11 ms in the 3 axes Hermetic Version: 50g in the 3 axes •D  urability: 500 full coupling and uncoupling cycles •S  hielding: 5mΩ (FDBA 57 version) ENVIRONMENTAL CONDITIONS • Service Temperature: – 55°C to + 200°C • Thermal Shocks: Sealed and Steel/Stainless Steel and Hermetic Version: 10 cycles from – 55°C to + 200°C Aluminium Hermetic Version: 10 cycles from – 55°C to + 200°C 1 cycle 10 H/200°C • Sealing: Sealed Version: ( in accordance with MIL-C-26482). Maximum leackage ≤ 16 cm3/h under 2.1 bars •A  llowed Wires Section: Sealed Version: - Size 20 : 0.21 to 0.60 mm2 - Size 16 : 0.60 to 1.34 mm2 - Size 12 : 1.91 to 3.18 mm2 Hermetic Version: - Size 20 : 0.21 to 0.93 mm2 - Size 16 : 0.60 to 0.91 mm2 - Size 12 : 1.91 to 3.18 mm2 •D  iameter Over Insulation Sheath: Sealed Version: - Size 20 : 0.71 to 2.11 mm - Size 16 : 1.20 to 2.62 mm - Size 12 : 1.93 to 4.01 mm • Air Leackage: Hermetic Version: ≤ 1.10–6 mbar.l/s under 1 bar vaccum. • Salt Spray: Hermetic Version: N  ickel - 48 hours Black Anodized-96 Hrs Stainless Steel/Cadmium-500 hrs AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 6 AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 7 FDBA/HDBA Series FDBA/HDBA Series Part Numbering System DEUTSCH PART NUMBERING SYSTEM Example of order : FDBA HDBA EN3646 PART NUMBERING SYSTEM *4 H ** - ** P N - K *** Example of order : EN3646 * * 10 - 06 - M N CONNECTOR TYPE CONNECTOR TYPE Standard and hermetic Aluminium hermetic version CONNECTOR MODEL VERSION 5 Standard 6 Stainless steel nickel plating 7 Passivated stainless steel *0 Square flange receptacle Solder receptacle. hermetic only A Black anodized aluminium RS SHELL TYPE *3 *4 Jam-nut mounting receptacle *6 Plug Plug with RFI (RADIO FREQUENCY INTERFERENCE) fingers Large square flange. hermetic only Stainless steel. consult us *7 *8 * WS Y SHELL TYPE 0 Sealed or hermetic square flange receptacle 6 Plug 7 Sealed or hermetic Jam nut mounting receptacle VERSION H Nickel-plated aluminium alloy. plug with grounding-spring-system Screening ring with grounding-springsystem screening ring Hermetic receptacle. in passivated stainless steel Hermetic SHELL SIZE Without Sealed index 08-10-12-14-16-18-20-22-24 SHELL SIZE ARRANGEMENTS 08-10-12-14-16-18-20-22-24 (See page 10) ARRANGEMENTS (See page 7) CONTACT TYPE CONTACT TYPE P Male contact S Female contact INSERT CLOCKING POSITION N M Male standard contact F Female standard contact A Male contact undelivered B Female contact undelivered C Special male contact size 20 Special female contact size 20 D Normal W-X-Y-Z Others INSERT CLOCKING POSITION INDEX N Connector evolution Normal W-X-Y-Z Others SPECIAL MODIFICATIONS 059 Straight cable clamp 081 Elbowed Cable Clamp 090 Delivery without contact Size 20 contact in accordance with ASNE Nickel version connector A246 A499 A838 B246 A377 Olive drab cadmium Hybrid arrangement size 20 & 16. in accordance with ASNE PC tail connector For other PC tail options, consult TE Connectivity representative AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 8 AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 9 FDBA/HDBA Series FDBA/HDBA Series Male front face view H A G B K F J E C D Key Orientation Arrangements Clocking position is normal when the insert vertical axis is intermingled with the shell keyway axis. An unkeying can be performed between 2 connectors of same layout by angular displacement of one of the inserts in its shell. MALE INSERT VIEWED FROM FRONT FACE. This insert rotation is made in the clockwise for pin layouts and in the counter clockwise for socket layouts. Angular displacements on the hereafter table give clocking positions W - X - Y - or Z (see table). 8-3A/8-98 3 contacts size 20 8-33 3 contacts size 20 8 E1 1 contact Quadrax 10-6 6 contacts size 20 12-3 3 contacts size 16 12-8 8 contacts size 20 Normal clocking position G H F E D H G H K A F J B E 12-10 10 contacts size 20 K G C D Normal clocking position Clocking position in degrees Arrangements W 8-3A / 8-98 8-33 60 90 X 210 - 8 E1* - - 10-6 90 12-3 - 12-8 90 Y - - 20 3 3 - - - - - - - 180 - 112 203 292 16 - 12 - 8 - 1 1 6 - - - 1 - 3 - - 2 - - 1 12-10 60 155 270 295 10 - - - 1 14-4 45 - - - - - 4 - 1 14-5 40 92 184 273 - 5 - - 2 14-12 43 90 - - 8 4 - - 1 14-15 17 110 155 234 14 1 - - 1 14-19 30 165 315 - 19 - - - 1 16-8 54 152 180 331 - 8 - - 2 16-21 - - - - 16 5 - - 1 16-26 60 - 275 338 26 - - - 1 18-11 62 119 241 340 - 11 - - 1 18-32 85 138 222 265 32 - - - 1 20-16 238 318 333 347 - 16 - - 2 20-39 63 144 252 333 37 2 - - 1 20-41 45 126 225 - 41 - - - 1 22-12 - - - 6 - - 12 - 1 22-21 16 135 175 349 - 21 - - 2 22-41 39 135 264 - 27 14 - - 1 22-55 24-19 30 30 142 165 226 315 314 - 55 - - 19 - G 16-8 8 contacts size 16 H N G L 14-19 19 contacts size 20 C P H C D M M R J D N T J C P V U K E F D R S H D G 18-11 11 contacts size 16 24-31 90 225 255 - - 31 - - 1 24-61 90 180 270 324 61 - - - 1 18-32 32 contacts size 20 C G L F P T S h R g P b r m q n p L 22-21 21 contacts size 16 X U J H W T D E P 24-19 19 contacts size 12 U K J E S T Z g N G 22-12 12 contacts size 12 F B N K G D F C b D E F K FF x h H GG y i - N AA z j - P G d J 22-55 55 contacts size 20 R w g M BB G H J F b c d E a t u D Z s DD EE Y r CC HH C X q _ e K B W p _ v f L A V n m k E U T S c C L H B L M E F M G J f 0 M K N a F B W Q C D S E F 24-61 61 contacts size 20 V s U NN EE MM p _ R n HH PP CC m N BB B c x z k j - M L E f F g h i - D e y KK AA C d w JJ LL DD P A b v GG FF q _ T a u t r S T U G W R d H X c e Z Y P g X J A b f V H a e D J E p _ q _ C P A b n B N R H D c s A G Z A G H S J C K L 20-16 16 contacts size 16 F m Y 24-31 31 contacts size 16 d X M G a Z D e Y L R V E n p k 0 C P X m r h D Y q M X B t i - S B A j - R 2 N U T F 2 L V 22-41 27 contacts size 20 14 contacts size 16 C S G M f P N R V R G A t r g H k s h S B W K F T J X j l A P L E b 20-41 41 contacts size 20 H J K N M a c d e M W V U D Z V W J K C Y Z a K L D U c Y K W g h L C Y k f N B X j l A W V U 20-39 37 contacts size 20 2 contacts size 16 j c M B V f d N D U M C T b Z L A T e S a N G H J S E 1 2 K 16-26 26 contacts size 20 T U R P D Y L R C S V M B K X N A J H R P 16-21 16 contacts size 20 5 contacts size 16 C 1 - - C D K 14-15 14 contacts size 20 1 contacts size 16 I E B E L B K F C (see page 7) - 8 A J M A 14-5 5 contacts size 16 B D Service Voltage Contacts sizes Z H G 14-12 8 contacts size 20 4 contacts size 16 A 14-4 4 contacts size 12 J G H J K * 8 E1 arrangement used only with coax, twinax, triax, quadrax, and optical contacts. AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 10 AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 11 FDBA/HDBA Series FDBA/HDBA Series Receptacles With Nut FDBA 50-**-A285 B B C C L D L E D E Rear Accessory 164-8013-** for Receptacle FDBA 50-8 E1 PN 090 B 37.10 max. 14.30 max. tightening torque : 0.10 mdaN max. SQUARE FLANGE Without Nut FDBA 50 D B D B C L E C E C Sealed version F F C G F G 4 holes Ø 3.15 + 0.15 sizes 8 to 22 4 holes Ø 3.73 + 0.15 size 24 Ø 8.03 max. L B Ø 18.50 max. **-**CD9 164-8013-08 Ø 15 max. C B C F Size 08 10 12 14 16 18 20 22 24 B max. 21.00 24.25 26.60 29.00 31.30 33.70 36.85 39.95 43.15 C ± 0.1 15.08 18.26 20.62 23.02 24.58 26.98 29.36 31.76 34.92 D ± 0.15 11.13 11.13 11.13 11.13 11.13 11.13 14.85 14.85 15.70 E max. 1.45 1.45 1.45 1.45 1.45 1.45 2.25 2.25 2.25 F max. 12.03 15.01 19.07 22.24 25.42 28.60 31.77 34.94 38.12 G max. 15.65 18.65 21.80 25.00 28.25 30.95 34.15 37.30 40.45 L max. 31.45 31.45 31.45 31.45 31.45 31.45 33.85 33.85 33.85 Max. rear accessory tightening torque 0.35 daN 0.40 daN 0.50 daN 0.60 daN 0.65 daN 0.70 daN 0.75 daN 0.80 daN 0.90 daN Dimensions in mm B With Straight Cable Clamp FDBA 50-** 059 4 holes Ø 3.15 + 0.15 sizes 8 to 22 4 holes Ø 3.73 + 0.15 size 24 B C Size 08 10 12 14 16 18 20 22 24 B max. 21.00 24.25 26.60 29.00 31.30 33.70 36.85 39.95 43.15 C ± 0.1 15.08 18.26 20.62 23.02 24.58 26.98 29.36 31.76 34.92 D ± 0.15 11.13 11.13 11.13 11.13 11.13 11.13 14.85 14.85 15.70 B CB L B D C F C Ø allowed cable J J D E L E J1 GJ1 G F 4 holes Ø 3.15 + 0.15 sizes 8 to 22 4 holes Ø 3.73 + 0.15 size 24 Ø tightened cable E max. 1.45 1.45 1.45 1.45 1.45 1.45 2.25 2.25 2.25 F max. 12.03 15.01 19.07 22.24 25.42 28.60 31.77 34.94 38.12 Size L max. 25.50 25.50 25.50 25.50 25.50 25.50 27.95 27.95 27.95 B max. 21.00 24.25 26.60 29.00 31.30 C ± 0.1 15.08 18.26 20.62 23.02 24.58 D ± 0.15 11.13 11.13 11.13 11.13 11.13 11.13 Dimensions in mm 08 10 12 14 16 18 20 22 24 33.70 36.85 39.95 43.15 26.98 29.36 31.76 34.92 14.85 14.85 15.70 E max. 1.45 1.45 1.45 1.45 1.45 1.45 2.25 2.25 2.25 F max. 12.03 15.01 19.07 22.24 25.42 28.60 31.77 34.94 38.12 G max. 15.65 18.65 21.80 25.00 28.25 30.95 34.15 37.30 40.45 J1 max. 5.15 7.25 10.55 12.05 15.85 17.95 21.05 24.25 27.45 J max. 6.80 7.95 12.75 14.60 17.80 19.80 23.00 26.10 28.80 L max. 40.40 40.40 40.40 46.40 46.40 46.40 48.85 48.85 48.85 Max. rear accessory tightening torque 0.35 daN 0.40 daN 0.50 daN 0.60 daN 0.65 daN 0.70 daN 0.75 daN 0.80 daN 0.90 daN Dimensions in mm AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 12 AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 13 FDBA/HDBA Series FDBA/HDBA Series With Elbowed Cable Clamp FDBA 50-** 081 Mounting Styles B B C B L B C D C E F C Panel cutout L D 2.50 max. sizes 8 to 18 5.40 max. sizes 20 to 24 E G F G 4 holes Ø 3.15 4 holes Ø 3.73 + 0.15 R J1 cable Ø tightened sizes 8 to 22 size 24 3.50 max. Overall (as per accessory) J1 J H C T 3.50 max. R C H C T + 0.15 C J 4 holes Ø 3.15 ± 0.15 sizes 8 to 22 4 holes Ø 3.73 ± 0.15 size 24 Ø allowed cable Size 08 10 12 14 16 18 20 22 24 Size 08 10 12 14 16 18 20 22 24 B max. 21.00 24.25 26.60 29.00 31.30 33.70 36.85 39.95 43.15 C ± 0.1 15.08 18.26 20.62 23.02 24.58 26.98 29.36 31.76 34.92 C ± 0.1 15.08 18.26 20.62 23.02 24.58 26.98 29.36 31.76 34.92 H +0 / -0.2 16.05 19.00 22.25 25.40 28.60 31.75 34.90 38.10 41.30 D ± 0.15 11.13 11.13 11.13 11.13 11.13 11.13 14.85 14.85 15.70 E max. 1.45 1.45 1.45 1.45 1.45 1.45 2.25 2.25 2.25 F max. 12.03 15.01 19.07 22.24 25.42 28.60 31.77 34.94 38.12 G max. 15.65 18.65 21.80 25.00 28.25 30.95 34.15 37.30 40.45 J1 max. 5.15 7.25 10.55 12.05 15.85 17.95 21.05 24.25 27.45 J max. 6.80 7.95 12.75 14.60 17.80 19.80 23.00 26.10 28.80 L max. 43.80 46.15 49.60 51.85 55.25 58.70 64.50 67.60 70.70 R max. 17.40 20.20 23.60 25.50 29.70 32.60 36.00 39.20 42.80 T max. 20.70 22.00 23.80 25.30 26.80 28.30 29.90 31.60 33.20 Max. rear accessory tightening torque 0.35 daN 0.40 daN 0.50 daN 0.60 daN 0.65 daN 0.70 daN 0.75 daN 0.80 daN 0.90 daN Dimensions in mm SINGLE HOLE MOUNTING Without Nut FDBA 54 L D F L 2.05 max. D F 2.05 max. A M A M Sealed version Dimensions in mm Size 08 10 12 14 16 18 20 22 24 A max. 23.30 26.60 30.40 33.80 37.00 40.15 45.20 48.35 51.55 D ± 0.1 11.13 11.13 11.13 11.13 11.13 11.13 14.85 14.85 15.70 F max. 12.03 15.01 19.07 22.24 25.42 28.60 31.77 34.94 38.12 L max. 25.50 25.50 25.50 25.50 25.50 25.50 27.95 27.95 27.95 M max. 19.20 22.37 27.12 30.30 33.47 36.67 39.82 43.02 46.17 Max. rear accessory tightening torque 0.75 daN 1 daN 1.30 daN 1.50 daN 1.80 daN 2.10 daN 2.30 daN 2.60 daN 2.90 daN Dimensions in mm AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 14 AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 15 FDBA/HDBA Series FDBA/HDBA Series With Nut FDBA 54-**-A285 With Straight Cable Clamp FDBA 54-** 059 A A M M D L L D2.05 max. 2.05 max. F G F A A M M L F G M L 2.05 max. D D F 2.05 max. J1 G Ø allowed M cable J1 G Ø tightened cable Size 08 10 12 14 16 18 20 22 24 Size 08 10 12 14 16 18 20 22 24 A max. 23.30 26.60 30.40 33.80 37.00 40.15 45.20 48.35 51.55 A max. 23.30 26.60 30.40 33.80 37.00 40.15 45.20 48.35 51.55 D ± 0.1 11.13 11.13 11.13 11.13 11.13 11.13 14.85 14.85 15.70 D ± 0.1 11.13 11.13 11.13 11.13 11.13 11.13 14.85 14.85 15.70 F max. 12.03 15.01 19.07 22.24 25.42 28.60 31.77 34.94 38.12 F max. 12.03 15.01 19.07 22.24 25.42 28.60 31.77 34.94 38.12 G max. 15.65 18.65 21.80 25.00 28.25 30.95 34.15 37.30 40.45 G max. 15.65 18.65 21.80 25.00 28.25 30.95 34.15 37.30 40.45 L max. 31.45 31.45 31.45 31.45 31.45 31.45 33.85 33.85 33.85 J1 max. 5.15 7.25 10.55 12.05 15.85 17.95 21.05 24.25 27.45 M max. 19.20 22.37 27.12 30.30 33.47 36.67 39.82 43.02 46.17 L max. 40.40 40.40 40.40 46.40 46.40 46.40 48.85 48.85 48.85 Max. lightened nut jam nut mounting tightening torque 22.37 27.12 30.30 33.47 36.67 39.82 43.02 46.17 1 daN 1.30 daN 1.50 daN 1.80 daN 2.10 daN 2.30 daN 2.60 daN 2.90 daN M max. 19.20 0.75 daN Max. rear accessory tightening torque 0.75 daN 1 daN 1.30 daN 1.50 daN 1.80 daN 2.10 daN 2.30 daN 2.60 daN 2.90 daN 0.35 daN Max. lightened nut jam nut mounting tightening torque Max. rear accessory tightening torque 0.35 daN 0.40 daN 0.50 daN 0.60 daN 0.65 daN 0.70 daN 0.75 daN 0.80 daN 0.90 daN 0.40 daN 0.50 daN 0.60 daN 0.65 daN 0.70 daN 0.75 daN 0.80 daN 0.90 daN Dimensions in mm Dimensions in mm AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 16 AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 17 FDBA/HDBA Series FDBA/HDBA Series With Elbowed Cable Clamp FDBA 54-** 081 FDBA 50-**-A377 / FDBA 54-**-A377 A A M M L 2.05 max. D F D F C L 2.05 max. A G 7,1 Ø0.6 ±0.05 G A T ØB T 30° R J1 Ø tightened cable J R J1 J Plat 0.25 D Ø allowed cable Size 08 10 12 14 16 18 20 22 24 Size 08 - 18 20 - 22 24 A max. 23.30 26.60 30.40 33.80 37.00 40.15 45.20 48.35 51.55 A D ± 0.1 8.51 ±0.8 7.42 ±0.45 7.42 ±0.45 11.13 11.13 11.13 11.13 11.13 11.13 14.85 14.85 15.70 C F max. 12.03 15.01 19.07 22.24 25.42 28.60 31.77 34.94 38.12 26.75 ±0.8 24.58 ±0.45 23.76 ±0.46 G max. 15.65 18.65 21.80 25.00 28.25 30.95 34.15 37.30 40.45 D 29.36 ±0.3 32.01 ±0.3 32.01 ±0.3 J1 max. 5.15 7.25 10.55 12.05 15.85 17.95 21.05 24.25 27.45 J max. 6.80 7.95 12.75 14.60 17.80 19.80 23.00 26.10 28.80 Size #20 #16 L max. 43.80 46.15 49.60 51.85 55.25 58.70 64.50 67.60 70.70 ØB 1.2 1.5 R max. 17.40 20.20 23.60 25.50 29.70 32.60 36.00 39.20 42.80 ref. PIN 006 0063 20 006 0063 16 T max. 20.70 22.00 23.80 25.30 26.80 28.30 29.90 31.60 33.20 ref. SOCKET 006 0064 20 006 0064 16 Max. lightened nut jam nut mounting tightening torque 0.75 daN 1 daN 1.30 daN 1.50 daN 1.80 daN 2.10 daN 2.30 daN 2.60 daN 2.90 daN Max. rear accessory tightening torque 0.35 daN 0.40 daN 0.50 daN 0.60 daN 0.65 daN 0.70 daN 0.75 daN 0.80 daN 0.90 daN Contacts Dimensions in mm Dimensions in mm Mounting Styles 4.75 max. sizes 8 to 18 6.35 max. sizes 20 to 22 5.60 max. size 24 Panel cutout N H H N Overall (as per accessory) Size 08 10 12 14 16 18 20 22 24 H +0 / -0.2 14.70 17.85 22.60 25.75 28.95 32.10 35.30 38.45 41.65 N +0 / -0.2 13.85 17.05 21.15 24.30 27.45 30.65 33.80 37.00 40.15 Dimensions in mm AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 18 AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 19 FDBA/HDBA Series FDBA/HDBA Series Hermetic Receptacles SQUARE FLANGE SINGLE HOLE MOUNTING FDBA 50H FDBA 54H FDBA 50H-**-A276A D C D1 1.70 max. Mounting styles B L D C 1.70 max. G B M E Panel cutout 9.5 max. C F H F P 4 holes Ø 3.15 ± 0.15 sizes 8 to 22 4 holes Ø 3.73 ± 0.15 size 24 13.50 max. FDBA 53H B D G C1 H N * 4 holes Ø 3.15 ± 0.15 sizes 8 to 22 4 holes Ø 3.73 ± 0.15 size 24 A * The contacts size 20 are sunked in the shell. * The contacts size 16 can stick out of 1.35 max. B1 D1 1.70 max. C1 F H C1 B1 P 3.20 max. 4 holes Ø 3.80 ± 0.1 4 holes Ø 3.80 ± 0.1 Size 08 10 12 14 16 18 20 22 24 B max. 21.00 24.25 26.60 29.00 31.30 33.70 36.85 39.95 43.15 B1 max. 26.50 29.10 32.25 34.65 37.00 39.05 43.00 44.95 48.15 C ± 0.1 15.08 18.26 20.62 23.02 24.58 26.98 29.36 31.76 34.92 C1 ± 0.1 18.10 20.62 23.82 26.18 28.57 30.55 32.94 34.92 38.10 D ± 0.15 12.65 12.65 12.62 12.65 12.65 12.65 14.09 14.09 14.93 D1 max. 1.55 1.55 1.55 1.55 1.55 1.55 2.25 2.25 2.25 F max. 12.03 15.01 19.07 22.24 25.42 28.60 31.77 34.94 38.12 G max. 2.50 2.50 2.50 2.50 2.50 2.50 5.40 5.40 5.40 H +0 / -0.2 16.05 19.00 22.25 25.40 28.60 31.75 34.90 38.10 41.30 L max. 13.75 13.75 13.75 13.75 13.75 13.75 15.35 15.35 15.35 20 6.85 6.85 6.85 6.85 6.85 6.85 7.10 7.10 6.25 16 8.95 8.95 8.95 8.95 8.95 8.95 9.20 9.20 8.35 P max. Sizes F FDBA 53H-**-A276A Mounting styles C1 C 0.70 max. Size 08 10 12 14 16 18 20 22 24 A max. 27.30 30.50 35.30 38.40 41.60 44.80 49.60 52.70 55.90 B max. 24.00 27.20 32.00 35.10 38.30 41.50 46.20 49.40 52.60 D ± 0.15 17.81 17.81 17.81 17.81 17.81 17.81 22.58 22.58 23.67 E max. 2.50 2.50 2.50 2.50 2.50 2.50 3.30 3.30 3.30 F max. 12.03 15.01 19.07 22.24 25.42 28.60 31.77 34.94 38.12 G max. 3.17 3.17 3.17 3.17 3.17 3.17 6.35 6.35 6.35 H +0.2 / -0 14.40 17.58 22.45 25.52 28.70 31.87 35.05 38.22 41.40 M max. 19.20 22.37 27.12 30.30 33.47 36.67 39.82 43.02 46.17 N +0.2 / -0 13.48 16.66 20.80 23.95 27.10 30.27 33.45 36.62 39.80 Max. lightened nut jam nut mounting tightening torque 0.75 daN 1 daN 1.30 daN 1.50 daN 1.80 daN 2.10 daN 2.30 daN 2.60 daN 2.90 daN Dimensions in mm Dimensions in mm AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 20 AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 21 FDBA/HDBA Series FDBA/HDBA Series SOLDER FLANGE Without Nut FDBA 56 / FDBA 57-**-A499 FDBA 53H Shell type 57 with RFI fingers must be ordered in accordance with part numbering system with the modification A499 (nickel version connector). L F D D1 0,95 max. Mounting styles L LL Panel cutout F F G P Size 08 10 12 14 16 18 20 22 24 F max. 17.75 21.05 24.60 28.05 31.10 34.40 37.65 40.90 44.10 L max. 25.55 25.55 25.55 25.55 25.55 25.55 27.10 27.10 27.10 18 20 22 24 Size 08 10 12 14 16 18 20 22 24 A max. 16.10 19.25 21.65 24.85 28.00 31.15 33.55 36.70 39.90 D ± 0.5 11.50 11.50 11.50 11.50 11.50 11.50 13.11 13.11 13.95 D1 max. 2.60 2.60 2.60 2.60 2.60 2.60 3.35 3.35 3.35 F max. 12.03 15.01 19.07 22.24 25.42 28.60 31.77 34.94 38.12 G max. 14.35 17.15 19.90 23.10 26.25 29.45 31.80 35.00 38.15 H +0.2 / -0 14.75 17.55 20.30 23.50 26.65 29.85 32.20 35.40 38.55 20 7.95 7.95 7.95 7.95 7.95 7.95 8.20 8.20 7.35 Size 08 16 10.00 10.00 10.00 10.00 10.00 10.00 10.30 10.30 9.50 F max. P max. Sizes Dimensions in mm Plugs Sealed version L F H A FF Dimensions in mm With Nut FDBA 56-**-A285 / FDBA 57-**-A5787 L F F LL L GFF 10 12 17.75 21.05 G max. 15.65 L max. Max. rear accessory tightening torque GF GG L G 14 16 24.60 28.05 31.10 34.40 37.65 40.90 44.10 18.65 21.80 25.00 28.25 30.95 34.15 37.30 40.45 31.45 31.45 31.45 31.45 31.45 31.45 33.00 33.00 33.00 0.35 daN 0.40 daN 0.50 daN 0.60 daN 0.65 daN 0.70 daN 0.75 daN 0.80 daN 0.90 daN LL L Dimensions in mm Rear Accessory 164-8013-** for Plug FDBA 56-8 E1 SN 090 With Straight Cable Clamp FDBA 56-** 059 / FDBA 57-**-A5559 L FF F J1 G J1 J1 GG L 37.10 max. 14.30 max. Ø 18.50 max. J **-**CD9 164-8013-08 Ø 15 max. J Ø 8.03 max. Tightening torque : 0.10 mdaN max. JJ F Ø allowed cable Ø tightened cable Size 08 10 12 14 16 18 20 22 24 F max. 17.75 21.05 24.60 28.05 31.10 34.40 37.65 40.90 44.10 G max. 15.65 18.65 21.80 25.00 28.25 30.95 34.15 37.30 40.45 J1 max. 5.15 7.25 10.55 12.05 15.85 17.95 21.05 24.25 27.45 J max. 6.80 7.95 12.75 14.60 17.80 19.80 23.00 26.10 28.80 GG 47.95 47.95 47.95 0.80 daN 0.90 daN L L L max. 40.40 F40.40 40.40 F46.40 F Max. rear accessory tightening torque 0.35 daN 0.40 daN 0.50 daN 0.60 daN F R PAGE 22 J1 G J RR J1 J AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 R R LL G 46.40L 46.40 T daN 0.65 0.70 daN G F Dimensions in mm AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 J1 G F J1 J TT daN 0.75 G T J1 J1 JJ J1 J T PAGE 23 F J G F J1 G J FDBA/HDBA Series FDBA/HDBA Series With Elbowed Cable Clamp FDBA 56-** 059 / FDBA 57-**-A5560 Mating and Unmating Dimensions L L Square Flange F FDBA 50 G F T J1Ø tightened cable R J1 J J Ø allowed cable Size 08 10 12 14 16 18 20 22 24 F max. 17.75 21.05 24.60 28.05 31.10 34.40 37.65 40.90 44.10 G max. 15.65 18.65 21.80 25.00 28.25 30.95 34.15 37.30 40.45 J1 max. 5.15 7.25 10.55 12.05 15.85 17.95 21.05 24.25 27.45 J max. 6.80 7.95 12.75 14.60 17.80 19.80 23.00 26.10 28.80 L max. 43.85 46.20 49.65 51.90 55.30 58.75 63.65 66.975 69.85 R max. 17.40 20.20 23.60 25.50 29.70 32.60 36.00 39.20 42.80 T max. 20.70 22.00 23.80 25.30 26.80 28.30 29.90 31.60 33.20 Max. rear accessory tightening torque 0.35 daN 0.40 daN 0.50 daN 0.60 daN 0.65 daN G1 G1 G G L3 L3 L1 L1 T R FDBA 54 G 0.70 daN 0.75 daN 0.80 daN 0.90 daN Dimensions in mm 3.20 max. K FDBA 56 3.20 max. K L FDBA 56 8.90 max. 8.90 max. L Size 08 - 18 20 - 22 24 K max. 13.30 11.15 10.30 L max. 38.25 44.30 45.15 L1 max. 28.65 32.30 33.15 L2 max. 42.45 46.35 46.35 L3 max. 34.20 36.55 36.55 G max. 2.50 5.40 5.40 G1 max. 4.75 6.35 5.60 L2 L2 Dimensions in mm AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 24 AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 25 FDBA/HDBA Series FDBA/HDBA Series Protective Covers Accessories DBAC 50** For Receptacles DBAC 50-54** LL Overall length after mating F F GG AA Lightened backshell L2 L2 L2 L2 Standard backshell Note : For nylon wire option instead of chain, add MOD A190 at the end of the reference For receptable mounting on square flange receptable For Plugs For receptacle mounting on single hole mounting DBAC 56-54** G DBAC 56** L1 DBAC 56-56** G1 4.10 mini. B Straight cable clamp Elbowed cable clamp L2 L2 PP Size Part number F max. Part number F max. Part number F max. Part number F max. 08 004-0003-08 7.10 006-0909-08 14.00 006-0910-08 22.25 006-0908-08 25.70 10 004-0003-10 7.10 006-0909-10 14.00 006-0910-10 22.25 006-0908-10 28.05 12 004-0003-12 7.10 006-0909-12 14.00 006-0910-12 28.25 006-0908-12 31.50 14 004-0003-14 7.10 006-0909-14 14.00 006-0910-14 28.25 006-0908-14 33.75 16 004-0003-16 7.10 006-0909-16 14.00 006-0910-16 28.25 006-0908-16 37.15 18 004-0003-18 7.10 006-0909-18 14.00 006-0910-18 28.25 006-0908-18 40.60 20 004-0003-20 7.10 006-0909-20 14.00 006-0910-20 28.25 006-0908-20 43.95 22 004-0003-22 7.10 006-0909-22 14.00 006-0910-22 28.25 006-0908-22 47.05 24 004-0003-24 7.10 006-0909-24 14.00 006-0910-24 28.25 006-0908-24 50.55 Dimensions in mm A1 F F 4.10 4.10mini. mini. EE E1 F Dummy Receptacle for Plugs L2 L2 L2 L2 P1 For plug attached to cable clamp For plug mounting on single hole mounting L Size 08 10 12 14 16 18 20 22 24 A max. 16.60 19.70 24.60 27.80 30.90 34.10 37.30 40.50 44.10 A1 max. 18.30 21.50 25.40 28.60 31.80 34.90 38.10 41.30 44.50 B max. 16.10 18.10 22.10 24.10 27.10 30.10 33.10 36.10 41.10 E max. 10.15 10.15 10.15 10.15 10.15 10.15 10.15 10.15 10.30 E1 max. 9.60 9.60 9.60 9.60 9.60 9.60 9.60 9.60 10.45 F max. 12.03 15.01 19.07 22.24 25.42 28.60 31.77 34.94 38.12 G mini 14.60 17.70 22.50 25.70 28.90 32.00 35.20 38.40 41.60 G1 max. 12.45 15.70 18.85 22.10 25.50 27.35 30.40 33.30 36.80 L max. 17.85 17.85 17.85 17.85 17.85 17.85 17.85 17.85 18.85 L1 max. 18.65 18.65 18.65 18.65 18.65 18.65 20.25 20.25 20.10 L2 max. 79.00 79.00 95.00 95.00 95.00 95.00 111.00 111.00 111.00 P max. 14.20 14.20 14.20 14.20 14.20 14.20 14.20 14.20 15.20 P1 max. 14.40 14.40 14.40 14.40 14.40 14.40 16.00 16.00 16.80 L E F F B B C E C C C B B 4 holes Ø 3.15 ± 0.15 sizes 8 to 22 4 holes Ø 3.73 ± 0.15 size 24 Size Part number B max. C ± 0.1 E max. F max. L max. 8 DBA 50 PR 8 21.00 15.08 1.95 12.03 14.70 10 DBA 50 PR 10 24.20 18.26 1.95 15.01 14.70 12 DBA 50 PR 12 26.55 20.62 1.95 19.07 14.70 14 DBA 50 PR 14 28.95 23.02 1.95 22.24 14.70 16 DBA 50 PR 16 31.30 24.58 1.95 25.42 14.70 18 DBA 50 PR 18 33.70 26.98 1.95 28.60 14.70 20 DBA 50 PR 20 36.85 29.36 2.55 31.77 17.20 22 DBA 50 PR 22 39.95 31.76 2.55 34.94 17.20 24 DBA 50 PR 24 43.15 34.92 2.55 38.12 17.20 Dimensions in mm Dimensions in mm ** reference to the shell size of the connector AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 26 AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 27 FDBA/HDBA Series FDBA/HDBA Series Panel Seal Contacts For Square Flange Receptacle EN3155 COLOR CODING 2.50 max. sizes 8 to 18 5.40 max. sizes 20 to 24 2.50 max. sizes 8 to 18 5.40 max. sizes 20 to 24 Band 1 defines the conductor section, and band 2 defines the active area size. If the conductor section and the active area have the same size, then the contact can be identified by a single color band. B C Contacts references containing an “A” suffix indicate a “selective gold plating” for temperatures up to 200°C (i.e.006-0937-20 A). Hermetic version H Sealed version C B Color Coding Pin and Socket: EN3155 (200°C) 1 3.20 max. 2 1 2 Contact material : ± 0.15 4 holes Ø 3.30 sizes 8 to 22 4 holes Ø 4.30 ± 0.15 size 24 By default our contacts are manufactured in copper alloy. Type K Contacts are defined as below : Kp = 90% nickel and 10% chromium ; Kn = 95 % nickel, 2% aluminium and 3 % others inspection hole Rear flange mounting Color Coding Pin and Socket: EN3155 (Thermocouple) Front flange mounting Hermetic version sealed version For hermetic version For sealed version Size Part number H max. B max. C ± 0.1 H max. Part number H max. Part number Size 08 108-0003-08 B756 12.50 21.10 15.10 14.90 108-0005-08 B756 13.20 108-0001-08 B756 08 10 108-0003-10 B756 15.40 24.30 18.30 17.50 108-0005-10 B756 16.40 108-0001-10 B756 10 12 108-0001-12 B756 19.50 26.70 20.60 20.30 108-0005-12 B756 19.50 108-0001-12 B756 12 14 108-0001-14 B756 22.70 29.10 23.00 23.50 108-0005-14 B756 22.70 108-0001-14 B756 14 16 108-0001-16 B756 25.90 31.30 24.60 26.70 108-0005-16 B756 25.90 108-0001-16 B756 16 18 108-0003-18 B756 29.10 33.70 27.00 29.90 108-0005-18 B756 27.50 108-0001-18 B756 18 20 108-0003-20 B756 32.30 36.90 29.40 32.30 108-0003-20 B756 30.60 108-0001-20 B756 20 22 108-0003-22 B756 35.40 40.10 31.75 35.40 108-0003-22 B756 33.50 108-0001-22 B756 22 24 108-0003-24 B756 38.60 43.30 34.90 38.60 108-0003-24 B756 37.00 108-0001-24 B756 24 Size 24 23 22 20 16 12 10 8 4 0 Band 1 black purple green red blue yellow white red blue yellow AWG 26-30 24-28 22-26 22-28 20-24 18-22 18-24 16-20 14-18 14-20 12-14 10-12 Band 2 white grey green black red purple brown blue orange white yellow brown Dimensions in mm The panel seal gasket is not supplied along with the connector by default AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 28 AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 29 FDBA/HDBA Series FDBA/HDBA Series SIGNAL AND POWER CONTACTS Active area / Mating Size 20 20 20 20 20 20 20 16 16 16 16 12 12 Part No. Former Syst. Part No. 006-0937-20 A 004-0139-20 006-0912-20 A 004-0140-20 006-0044-20 A* 004-0141-20 006-0055-20 A* 004-0142-20 006-0972-20 A 0641-24-2059C 006-0973-20 A 0603-21-2059C 006-1060-20 - 006-1062-20 - 025-0404-20 - 025-0405-20 - 025-0402-20 - 025-0403-20 - 025-0406-20 - 025-0407-20 - 006-0937-16 A 004-0139-16 006-0912-16 A 004-0140-16 006-1102-16 A 004-0141-16 006-1104-16 A 004-0142-16 006-1168-16 A 109026-16A 006-1169-16 A 109027-16A 025-0870-16 - 025-0871-16 - 006-0937-12 A 004-0139-12 006-0912-12 A 004-0140-12 006-1157-12 A 109028 A 006-1159-12 A 109029 A Color Bands MIL Ref. - - EN Ref. Type EN3155-018M2020 P - EN3155-019F2020 S - EN3155-018M2018 P - EN3155-018F2018 S - - - - - - - - - - - - - S - Sealing plug AWG mm Ref. 2 Crimp Tool Positioner Part No. MIL Part No. Part No. MIL Part No. Insertion/Extraction Tool Red - - standard 20-24 0.25 - 0.6 006-0893-20 (red) 057-0461-11 M22520/1-01 057-0462-21 M22520/1-02 M15570-20 006-0902-20 Brown-Red - - enlarged 18-24 0.25 - 1 006-0893-20 (red) 057-0461-11 M22520/1-01 057-0462-21 M22520/1-02 M15570-20 006-0902-20 Black-Red - - reduced 26-30 0.055 - 0.15 006-0893-20 (red) 057-0463-12 M22520/2-01 057-0464-32 M22520/2-02 M15570-20 006-0902-20 - - Co enlarged 20-24 0.25 - 0.6 006-0893-16 (blue) 057-0461-11 M22520/1-01 057-0462-21 M22520/1-02 M15570-20 006-0902-20 Kp enlarged 18-22 0.4 - 1 006-0893-20 (red) 057-0461-11 M22520/1-01 057-0462-21 M22520/1-02 M15570-20 006-0902-20 Kn enlarged 18-22 0.4 - 1 006-0893-20 (red) 057-0461-11 M22520/1-01 057-0462-21 M22520/1-02 M15570-20 006-0902-20 - P - Purple-Red Yellow S - Purple-Red - P - Purple-Red Black S - Purple-Red - - Purple-Red - Co enlarged 18-22 0.4 - 1 006-0893-20 (red) 057-0461-11 M22520/1-01 057-0462-21 M22520/1-02 M15570-20 006-0902-20 - Blue-Blue - - standard 16-20 0.6 - 1.2 006-0893-16 (blue) 057-0461-11 M22520/1-01 057-0462-21 M22520/1-02 M15570-16 006-0902-16 White-Blue - - enlarged 14-18 1-2 006-0893-16 (blue) 057-0461-11 M22520/1-01 057-0462-21 M22520/1-02 M15570-16 006-0902-16 Red-Blue - - reduced 20-24 0.25 - 0.6 006-0893-16 (blue) 057-0461-11 M22520/1-01 057-0462-21 M22520/1-02 M15570-16 006-0902-16 White-Blue - - reduced 26-30 0.055 - 0.15 006-0893-16 (blue) 057-0463-12 M22520/2-01 057-0464-32 M22520/2-02 M15570-16 006-0902-16 Yellow - - standard 12-16 1.2 - 3 006-0892-12 (yellow) 057-0461-11 M22520/1-01 057-0462-21 M22520/1-02 M15570-12 006-0902-12 Blue-Yellow - - reduced 16-20 0.6 - 1.2 006-0892-12 (yellow) 057-0461-11 M22520/1-01 057-0462-21 M22520/1-02 M15570-12 006-0902-12 P S EN3155-018M1614 P - EN3155-019F1614 S - P - S - P - S - EN3155-018M1212 P - EN3155-019F1212 S - P - S - - Wire Range Barrel - S - Marking Contact yellow or Material black S EN3155-019F1616 - EN3155 P P - - P EN3155-018M1616 - - AS39029 Standard Contacts Supplied With Connector. * Contacts supplied with mod A246 and B246 (in accordance with ASNE 052/053/054). QUADRAX CONTACTS Crimping contacts Tools Part number Type Size For contacts For body 187-0108-08 P 8 M22520/2-01-K709 M22520/5-01 / M22520/5-45B 187-0109-08 S 8 M22520/2-01-K709 M22520/5-01 / M22520/5-45B AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 30 AEROSPACE, DEFENSE & MARINE /// FDBA/HDBA Series Standard UTE 93422 PAGE 31 LET’S CONNECT We make it easy to connect with our experts and are ready to provide all the support you need. Just call your local support number or visit www.te.com/industrial to chat with a Product Information Specialist. Technical Support te.com/support-center North America +1 800 522 6752 Asia Pacific +86 400 820 6015 North America (Toll) +1 717 986 7777 Japan 044 844 8180 EMEA/South Africa +800 0440 5100 Australia +61 2 9554 2695 EMEA (Toll) +31 73 624 6999 New Zealand +64 (0) 9 634 4580 India (Toll-Free) +800 440 5100 www.te.com/fdba AMP, AGASTAT, CII, HARTMAN, KILOVAC, MICRODOT, NANONICS, POLAMCO, Raychem SEACON, Rochester, DEUTSCH, TE Connectivity and the TE connectivity (logo) are trademarks of the TE Connectivity Ltd. family of companies. Other products. logos. and company names mentioned herein may be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information herein. nothing herein constitutes any guarantee that such information is error-free. or any other representation. warranty or guarantee that the information is accurate. correct. reliable or current. The TE entity issuing this publication reserves the right to make any adjustments to the information contained herein at any time without notice. All implied warranties regarding the information contained herein. including. but not limited to. any implied warranties of merchantability or fitness for a particular purpose are expressly disclaimed. The dimensions herein are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. © 2019  TE Connectivity Ltd. family of companies  All Rights Reserved. 2356672-1  06/19   Original AEROSPACE. DEFENSE & MARINE /// FDBA / HDBA Series Standard UTE 93422