CS2322

2322 Series HIGH VOLTAGE POWER SUPPLIES FEATURES Non-Metallic Case Cost Effective Reliable Solid State Design Maintenance Free Automatic Over Current Shutdown and Recovery High Frequency Switch-mode Design • UL Recognized Versions Available • RoHS Versions Available • Formerly CS2322 Series TYPICAL APPLICATIONS Electrostatic Air Cleaners Electrostatic Oil Cleaners DESCRIPTION The 2322 series of regulated solid state switching power supplies is designed for applications requiring a medium duty High Voltage power supply. Input voltage is 120 VAC (±10%), 50/60 Hz. Connection for "HV On" indicating LED is provided. The 2322 series is packaged in a nonmetallic enclosure and may be installed in any position. Consult the factory for additional information. TYPICAL ELECTRICAL SPECIFICATIONS Input Voltage: 120VAC (±10%) Input Frequency: 50/60 Hz Output Voltage: 12 kVDC Output Current: 1.5 mA Typical Output Power: 20 W Max Output Regulation: See Typical V-I Curve Load: May be operated into any load condition (capacitive, resistive or inductive) or no load. Can withstand arcing and short circuits. Isolated Output; High Voltage Referenced to Earth Ground TYPICAL MECHANICAL SPECIFICATIONS Case: Glass filled Noryl, UL 94V-1 Rated Encapsulant: Filled Epoxy, UL 94V-0 Rated Input Voltage Termination: ¼" black insulated terminals "HV On" Indicating Light Termination: ¼" black insulated terminals High Voltage Termination: ¼" red insulated terminals Temperature Rating: Operating 0º to +60ºC Storage -40º to +85ºC 972-248-7691 www.hvpsi.com Rev.3 NOTICE: This power supply requires adequate ground connection for operation. Failure to provide ground could result in failure of the power supply. Proper ground connections must be made to input terminal on the non-metallic case. 3227 Skylane Drive Carrollton, TX 75006 Specifications subject to change without prior notification 2322 Series HIGH VOLTAGE POWER SUPPLIES STANDARD MODELS ACN2322L10 ACP2322L10 ACN2322L12 ACP2322L12 INPUT VOLTAGE VAC 120 120 120 120 IONIZER VOLTAGE kVDC 10.0 kV 10.0 kV 12.0 kV 12.0 kV COLLECTOR VOLTAGE kVDC 5.0kV neg 5.0kV pos 6.0kV neg 6.0kV pos MAX OUTPUT CURRENT mADC 1.75 1.75 1.75 1.75 Formerly CS2322 Series 2322 SERIES TYPICAL V-I CURVE 14 12 (Input 120VAC) HV OUTPUT (kVDC) 10 8 6 4 2 0 0 0.5 1 1.5 2 Iout (mA) 3227 Skylane Drive Carrollton, TX 75006 972-248-7691 www.hvpsi.com Rev.3 Specifications subject to change without prior notification