1.5KE12C

1.5KE SERIES GLASS PASSIVATED UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS FEATURES ● Glass passivate chip ● low leakage ● Uni and bidirectional unit ● Excellent clamping capability ● Plastic material has UL recognition 94V-0 ● Fast response time . REVERSE VOLTAGE - 6.8 to 440 Volts POWER DISSIPATION - 1500 W atts DO- 27 .052(1.3) DIA. .048(1.2) 1.0(25.4) MIN .375(9.5) .335(8.5) 210 MECHANICAL DATA ●Case : Molded Plastic ●Marking : Unidirectional -type number and cathode band .220(5.6) DIA. .197(5.0) 1.0(25.4) MIN Bidirectional-type number only ●Weight :1.2 grams Dimensions in inches and(millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS Peak Power Dissipation at TA=25℃ TP=1ms (NOTE1) Peak Forward Surge Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) Steady State Power Dissipation at TL=75℃ Lead Lengths 0.375"(9.5mm),See Fig. 4 Maximum Instantaneous Forward Voltage at 50A for Unidirectional Devices Only (NOTE2) Operating Temperature Range Storage Temperature Range SYMBOL PPK VALUE Minimum 1500 UNIT WATTS IFSM 200 AMPS PM(AV) VF TJ TSTG 5.0 See NOTE 3 -55 to + 150 -55 to + 175 WATTS VOLTS ℃ ℃ NOTES:1. Non-repetitive current pulse ,per Fig. 5 and derated above TA=25℃ per Fig. 1 . 2. 8.3ms single half-wave duty cycle=4 pulses per minutes maximum (uni-directional units only). 3. VF=3.5V on 1.5KE6.8 thru 1.5KE200A devices and VF=5.0V on 1.5KE1100 thru 1.5KE400A devices. ~ 203 ~ RATING AND CHARACTERTIC CURVES 1.5KE SERIES FIG.1-PULSE DERATING CURVE PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT 100 10*1000 WAVEFORM AS DEFINED BY R.E.A FIG.2-TYPICAL JUNCTION CAPACITANCE 10000 CAPACITANCE， （ PF） 75 1000 T J=25℃ 50 100 25 0 0 25 50 75 100 125 150 175 200 MEASURED AT STAND-OFF VOLTAGE 10 1 4 10 100 1000 TA AMBIENT TEMPERATURE,℃ REVERSE VOLTAGE,VOLTS 100 PM(AV), STEADY STATE POWER DISSIPATION (W) FIG.3-PULSE RATING CURVE FIG.4-STEADY STATE POWER DERATING CURVE 5 PP, PEAK POWER ( KW) 4 3 10 2 1 60Hz RESISTIVE OR INDUCTIVE LOAD 1.0 T A=25℃, NON-REPETIVE PULSE WAVE FORM SHOWN IN FIG.5 0.1 0.1us 1.0us 10us 100us 1.0ms 10ms 0 25 50 75 100 125 150 175 200 TP, PULSE WIDTH TL, LEAD TEMPERATURE FIG.5 -PULSE WAVEFORM T R=10us IP ， PEAK PULSE CURRENT, （ %） 100 Peak value(IRSM) Half value = IRSM 2 Pulse with (Tp) is defined as that point where the peak current decays to 50% of IRSM 50 T J=25℃ 10*1000 waveform as defined by R.E.A TP 0 0 1.0 2.0 T, TIME (ms) 3.0 4.0 ~ 204 ~ 1.5KE SERIES Type Number Type Number Reverse Standoff Voltage VR(V) 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.20 10.50 11.10 12.10 12.80 12.90 13.60 14.50 15.30 16.20 17.10 17.80 18.80 19.40 20.50 21.80 23.10 24.30 25.60 26.80 28.20 29.10 30.80 31.60 33.30 34.80 36.80 38.10 40.20 41.30 43.60 45.40 47.80 Min(V) 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.50 10.80 11.40 11.70 12.40 13.50 14.30 14.40 15.20 16.20 17.10 18.00 19.00 19.80 20.90 21.60 22.80 24.30 25.70 27.00 28.50 29.70 31.40 32.40 34.20 35.10 37.10 38.70 40.90 42.30 44.70 45.90 48.50 50.40 53.20 Breakdown Voltage BV Lolts@lt Max(V) 7.48 7.14 8.25 7.88 9.02 8.61 10.00 9.55 11.00 10.50 12.10 11.60 13.20 12.60 14.30 13.70 16.50 15.80 17.60 16.80 19.80 18.90 22.00 21.00 24.20 23.10 26.40 25.20 29.70 28.40 33.00 31.50 36.30 34.70 39.60 37.80 42.90 41.00 47.30 45.20 51.70 49.40 56.10 53.60 61.60 58.80 It(mA) 10 10 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Max. Reverse Leakage IR(uA) 1000 1000 500 500 200 200 50 50 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Max. Clamping Voltage Vc(V) 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77.0 Max. Peak Pulse Ipp(A) 139.0 143.0 128.0 132.0 120.0 124.0 109.0 112.0 100.0 103.0 93.0 96.0 87.0 90.0 79.0 82.0 68.0 71.0 64.0 67.0 56.5 59.5 51.5 54.0 47.0 49.0 43.0 45.0 38.5 40.0 34.5 36.0 31.5 33.0 29.0 30.0 26.5 28.0 24.0 25.3 22.2 23.2 20.4 21.4 18.6 19.5 Max. Voltage Temp. %/℃ 0.057 0.057 0.061 0.061 0.065 0.065 0.068 0.068 0.073 0.073 0.075 0.075 0.078 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.088 0.088 0.090 0.090 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 0.101 0.101 0.102 0.102 0.103 0.103 (UNI) 1.5KE6.8 1.5KE6.8A 1.5KE7.5 1.5KE7.5A 1.5KE8.2 1.5KE8.2A 1.5KE9.1 1.5KE9.1A 1.5KE10 1.5KE10A 1.5KE11 1.5KE11A 1.5KE12 1.5KE12A 1.5KE13 1.5KE13A 1.5KE15 1.5KE15A 1.5KE16 1.5KE16A 1.5KE18 1.5KE18A 1.5KE20 1.5KE20A 1.5KE22 1.5KE22A 1.5KE24 1.5KE24A 1.5KE27 1.5KE27A 1.5KE30 1.5KE30A 1.5KE33 1.5KE33A 1.5KE36 1.5KE36A 1.5KE39 1.5KE39A 1.5KE43 1.5KE43A 1.5KE47 1.5KE47A 1.5KE51 1.5KE51A 1.5KE56 1.5KE56A (BI) 1.5KE6.8C 1.5KE6.8CA 1.5KE7.5C 1.5KE7.5CA 1.5KE8.2C 1.5KE8.2CA 1.5KE9.1C 1.5KE9.1CA 1.5KE10C 1.5KE10CA 1.5KE11C 1.5KE11CA 1.5KE12C 1.5KE12CA 1.5KE13C 1.5KE13CA 1.5KE15C 1.5KE15CA 1.5KE16C 1.5KE16CA 1.5KE18C 1.5KE18CA 1.5KE20C 1.5KE20CA 1.5KE22C 1.5KE22CA 1.5KE24C 1.5KE24CA 1.5KE27C 1.5KE27CA 1.5KE30C 1.5KE30CA 1.5KE33C 1.5KE33CA 1.5KE36C 1.5KE36CA 1.5KE39C 1.5KE39CA 1.5KE43C 1.5KE43CA 1.5KE47C 1.5KE47CA 1.5KE51C 1.5KE51CA 1.5KE56C 1.5KE56CA ~ 205 ~ 1.5KE SERIES Type Number Type Number Reverse Standoff Voltage VR(V) 50.2 53.0 55.1 58.1 60.7 64.7 66.4 70.1 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102.0 105.0 111.0 121.0 128.0 130.0 136.0 138.0 145.0 146.0 154.0 162.0 171.0 175.0 185.0 202.0 214.0 243.0 256.0 284.0 300.0 324.0 342.0 Min(V) 55.8 58.9 61.2 64.6 67.5 71.3 73.8 77.9 81.9 86.5 90.0 95.0 99.0 105.0 108.0 114.0 117.0 124.0 135.0 143.0 144.0 152.0 153.0 162.0 162.0 171.0 180.0 190.0 198.0 209.0 225.0 237.0 270.0 285.0 315.0 332.0 360.0 380.0 Breakdown Voltage BV Lolts@lt Max(V) 68.2 65.1 74.8 71.4 82.5 78.8 90.2 86.1 100.0 95.5 110.0 105.0 121.0 116.0 132.0 126.0 143.0 137.0 165.0 158.0 176.0 168.0 187.0 179.0 198.0 189.0 220.0 210.0 242.0 231.0 275.0 263.0 330.0 315.0 385.0 368.0 440.0 420.0 It(mA) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Max. Reverse Leakage IR(uA) 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Max. Clamping Voltage Vc(V) 89.0 85.0 98.0 92.0 108.0 103.0 118.0 113.0 131.0 125.0 144.0 137.0 158.0 152.0 173.0 165.0 187.0 179.0 215.0 207.0 230.0 219.0 244.0 234.0 258.0 246.0 287.0 274.0 344.0 328.0 360.0 344.4 430.0 414.0 504.0 482.0 574.0 548.0 Max. Peak Pulse Ipp(A) 16.90 17.70 15.30 16.30 13.90 14.60 12.70 13.30 11.40 12.00 10.40 11.00 9.50 9.90 8.70 9.10 8.00 8.40 7.00 7.20 6.50 6.80 6.20 6.40 5.80 6.10 5.20 5.50 4.30 4.60 5.00 5.00 5.00 5.00 4.00 4.00 4.00 4.00 Max. Voltage Temp. %/℃ 0.104 0.104 0.104 0.104 0.105 0.105 0.105 0.105 0.106 0.106 0.106 0.106 0.107 0.107 0.107 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 (UNI) 1.5KE62 1.5KE62A 1.5KE68 1.5KE68A 1.5KE75 1.5KE75A 1.5KE82 1.5KE82A 1.5KE91 1.5KE91A 1.5KE100 1.5KE100A 1.5KE110 1.5KE110A 1.5KE120 1.5KE120A 1.5KE130 1.5KE130A 1.5KE150 1.5KE150A 1.5KE160 1.5KE160A 1.5KE170 1.5KE170A 1.5KE180 1.5KE180A 1.5KE200 1.5KE200A 1.5KE220 1.5KE220A 1.5KE250 1.5KE250A 1.5KE300 1.5KE300A 1.5KE350 1.5KE350A 1.5KE400 1.5KE400A (BI) 1.5KE62C 1.5KE62CA 1.5KE68C 1.5KE68CA 1.5KE75C 1.5KE75CA 1.5KE82C 1.5KE82CA 1.5KE91C 1.5KE91CA 1.5KE100C 1.5KE100CA 1.5KE110C 1.5KE110CA 1.5KE120C 1.5KE120CA 1.5KE130C 1.5KE130CA 1.5KE150C 1.5KE150CA 1.5KE160C 1.5KE160CA 1.5KE170C 1.5KE170CA 1.5KE180C 1.5KE180CA 1.5KE200C 1.5KE200CA 1.5KE220C 1.5KE220CA 1.5KE250C 1.5KE250CA 1.5KE300C 1.5KE300CA 1.5KE350C 1.5KE350CA 1.5KE400C 1.5KE400CA NOTES: Suffix'C' denotes bidirectional device . Suffix'A' denotes 5% tolerance device .no suffix denotes 10% tolerance devive . 1. For bidirectional devices having VR of 10volts and under ,the IR limit is doubled . ~ 206 ~