2W01G

2W005G thru 2W10G GLASS PASSIVATED BRIDGE RECTIFIERS REVERSE VOLTAGE - 50 to 1000 Volts FORWARD CURRENT - 2.0 Amperes WOB .366(9.3) .350(8.9) .220(5.6) .200(5.1) FEATURES ● Surge overload rating -60 amperes peak ●Ldeal for printed circuit board ●Reliable low cost construction utilizong molded plastic technique results in expensive product ●Mounting Position :Any ●Lead:sliver plated copper lead. 1.1 (27.9) MIN 1.0 (25.4) MIN .032(0.81) POS. .028(0.71) LEAD .220(5.6) .180(4.6) .220(5.6) .180(4.6) SPACING Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Bridge Input Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load I2t Rating for Fusing (t＜8.3ms) Maximum Forward Voltage Drop per Element at 2.0A Peak Maximum Reverse Current at Rated DC Blocking Voltage Per Element Maximum Temperature Voltage Drop per Element at 2.0A Peak Operating Temperature Range TJ Operating Temperature Range TSTG TA=25℃ TA=100℃ @TA=25℃ SYMBOL 2W005G 2W01G VRRM VRMS VDC I(AV) 50 35 50 100 70 100 2W02G 200 140 200 2W04G 400 280 400 2.0 2W06G 600 420 600 2W08G 800 560 800 2W10G 1000 700 1000 UNIT V V V A Peak Forward Surage Current ,8.3m Single IFSM I2t VF IR TJ TSTG TJ TSTG 60 A A2S V uA mA pF ℃ ℃ 15.0 1.1 10.0 1.0 30 -55 to +150 -55 to +150 NOTES：1.Measured at 1.0MHZ and applied reverse voltage of 4.0 volts. ~ 247 ~ RATING AND CHARACTERTIC CURVES 2W005G thru 2W10G FIG.1-FORATING CURVE OUTPUT RECTIFIED CUURRENT AVERAGE FORWARD OUTPUTCURRENT AMPERES 2.0 PEAK FORWARD SURGE CURRENT AMPERES 60 50 40 30 20 10 0 1 10 NUMBER OF CYCLES AT 60HZ FIG.4-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 20 INSTANTANEOUS FORWARD CURRENT, AMPERES 10 7.0 5.0 3.0 2.0 1.0 0.7 0.5 0.3 0.2 0.1 0.07 0.05 0.03 0.02 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 100 T A=25℃ SINGLE SINE-WAVE JEDEC METHOD FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 0 50 100 150 AMBIENT TEMPERATURE ℃ FIG.3-TYPIACL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERRES 1.0 T J=100℃ 0.1 T J=25℃ PULSE WIDTH:300μS 1% DUTY CYCLE T J=25℃ 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE INSTANTANEOUS FORWARD VOLTAGE. VOLTS FIG.5-TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT 100 60 40 CAPACITANCE,(pF) 20 10 6.0 4.0 2.0 1.0 0.1 0.2 0.4 1.0 2.0 4.0 10 20 40 100 T J=25℃, f=1MHZ Vsig=50m p-p REVERSE VOLTAGE,VOLTS ~ 248 ~