ES2DA

ES2AA thru ES2JA SURFACE MOUNT SUPER FAST GLASS PASSIVATED RECTIFERS FEATURES ● Super fast switching time for high efficiency ●Low forward voltage drop and REVERSE VOLTAGE - 50 to 600 Volts FORWARD CURRENT - 2.0 Amperes SMA high current capability ●Low reverse leakage current ●Plastic material has UL flammability .062(1.60) .055(1.40) classification 94V-0 .181(4.60) .157(4.00) .114(2.90) .098(2.50) .012(.305) .006(.152) MECHANICAL DATA ●Case： Molded Plastic ●Polarity:Color band denotes cathode ●Weight: 0.002 ounces,0.053 grams ●Mounting position: Any .103(2.62) .079(2.00) .060(1.52) .030(0.76) .008(.203) .002(.051) .208(5.28) .188(4.80) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current Peak Forward Surge Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load(JEDEC Method) Peak Forward Voltage at 2.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @TJ=25℃ @TJ=100℃ @TA=50 ℃ SYMBOL VRRM VRMS VDC I(AV) ES2AA 50 35 50 ES2BA 100 70 100 ES2DA 200 140 200 2.0 ES2GA 400 280 400 ES2JA 600 420 600 UNIT V V V A IFSM VF IR TRR CJ RθJA TJ TSTG 40 0.95 75 1.25 5.0 100 35 30 25 -55 to +150 -55 to +150 1.70 A V μA nS pF ℃/W ℃ ℃ Maximum Reverse Recovery Time(Note 1) Typical Junction Capacitance (Note2) Typical Thermal Resistance (Note3) Operating Temperature Range Storage Temperature Range NOTES: 1.Measured with IF=0.5A, IR=1A, IRR=0.25A 2.Measured at 1.0 MHz and applied reverse voltage of 4.0V DC 3.Thermal resistance junction to ambient. ~ 152 ~ RATING AND CHARACTERTIC CURVES ES2AA thru ES2JA FIG. 1 – FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT AMPERES 3.0 AVERAGE FORWARD CURRENT AMPERES 2.5 2.0 1.5 1.0 0.5 0 25 50 75 100 125 150 175 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD FIG. 2 – MAXIMUM NON-REPETITIVE SURGE CURRENT 100 75 50 25 PULSE WIDTH 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 0 1 2 5 10 20 50 100 AMBIENT TEMPERATURE (°C) NUMBER OF CYCLES AT 60Hz FIG.3 – TYPICAL JUNCTION CAPACITANCE 100 100 FIG.4-TYPICAL FORWARD CHARACTERISTICS ES2AA - ES2DA INSTANTANEOUS FORWARD CURRENT, (A) ES2AA - ES2DA CAPACITANCE (pF) ES2GA - ES1JA 10 T J = 25°C PULSE WIDTH 300us ES2GA 10 T J = 25°C f = 1 MHz 1.0 ES2JA 1 1 4 10 100 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 REVERSE VOLTAGE ,VOLTS INSTANTANEOUS FORWARD VOLTAGE ,VOLTS ~ 153 ~