FR156

FR151 thru FR157 FAST RECOVERY RECTIFIERS REVERSE VOLTAGE - 50 to 1000 Volts FORWARD CURRENT - 1.5 Amperes DO-15 FEATURES ● Fast switching for high efficiency ● Low cost ● Diffused junction ● Low reverse leakage current ● Low forward voltage drop ● High current capability ● The plastic material carries UL recognition 94V-0 .034(0.9) .028(0.7) 1.0(25.4) MIN. DIA .300(7.6) .230(5.8) .140(3.6) .104(2.6) DIA. MECHANICAL DATA ●Case: JEDEC DO-15 molded plastic ●Polarity: Color band denotes cathode ●Weight: 0.015 ounces , 0.4 grams ●Mounting position: Any 1.0(25.4) MIN. Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current Peak Forward Surage Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load(JEDEC Method) Peak Forward Voltage at 1.5A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @TJ=25℃ @TJ=100℃ @TA=75 ℃ SYMBOL VRRM VRMS VDC I(AV) FR151 50 35 50 FR152 100 70 100 FR153 200 140 200 FR154 400 280 400 1.5 FR155 600 420 600 FR156 800 560 800 FR157 1000 700 1000 UNIT V V V A IFSM VF IR TRR CJ RθJA TJ TSTG 150 30 60 1.3 5.0 100 250 20 25 -50 to +125 -50 to +150 500 A V uA ns pF ℃/W ℃ ℃ Maximum Reverse Recovery Time(Note 1) Typical Junction Capacitance (Note2) Typical Thermal Resistance (Note3) Operating Temperature Range Storage Temperature Range NOTES: 1.Measured with IF=0.5A,IR=1A,IRR=0.25A 2.Measured at 1.0 MHz and applied reverse voltage of 4.0V DC 3.Thermal resistance junction of ambient. ~ 51 ~ RATING AND CHARACTERTIC CURVES FR151 thru FR157 FIG. 1 – FORWARD CURRENT DERATING CURVE 1.5 AVERAGE FORWARD CURRENT AMPERES PEAK FORWARD SURGE CURRENT, AMPERES FIG. 2 – MAXIMUM NON-REPETITIVE SURGE CURRENT 60 50 40 30 20 10 0 1 2 5 10 20 50 100 PULSE WIDTH 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 1.0 0.5 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE (℃) NUMBER OF CYCLES AT 60Hz FIG.3 – TYPICAL JUNCTION CAPACITANCE 100 INSTANTANEOUS FORWARD CURRENT,(A) 10 FIG.4-TYPICAL FORWARD CHARACTERISTICS FR151 - FR154 1.0 CAPACITANCE ,(pF) 10 FR155 - FR157 T J = 25°C 0.1 T J = 25°C f = 1 MHz PULSE WIDTH 300us 1 1 4 10 100 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 REVERSE VOLTAGE ,VOLTS INSTANTANEOUS FORWARD VOLTAGE ,VOLTS ~ 52 ~