HS2DA

HS2XA / UF2XA SERIES SURFACE MOUNT HIGH EFFICIENCY (ULTRA FAST) GLASS PASSIVATED RECTIFIERS FEATURES ● Low cost ● Diffused junction ● Ultra fast switching for high efficiency ● Low reverse leakage current ● Low forward voltage drop ● High current capability ● The plastic material carries UL recognition 94V-0 REVERSE VOLTAGE - 50 to 1000 Volts FORWARD CURRENT - 2.0 Amperes SMA .062(1.60) .055(1.40) .114(2.90) .098(2.50) .181(4.60) .157(4.00) .012(.305) .006(.152) MECHANICAL DATA ●Case： Molded Plastic ●Polarity: lndicated by cathode band ●Weight: 0.002 ounces,0.064 grams ●Mounting position: Any .103(2.62) .079(2.00) .060(1.52) .030(0.76) .008(.203) .002(.051) .208(5.28) .188(4.80) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% HS2AA UF2AA 50 35 50 HS2BA UF2BA 100 70 100 HS2DA UF2DA 200 140 200 HS2GA UF2GA 400 280 400 2.0 HS2JA UF2JA 600 420 600 HS2KA UF2KA 800 560 800 HS2MA UF2MA 1000 700 1000 CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current Peak Forward Surge Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load(JEDEC Method) Peak Forward Voltage at 2.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @TJ=25℃ @TJ=100℃ @TA =55 ℃ SYMBOL VRRM VRMS VDC I(AV) UNIT V V V A IFSM VF IR TRR CJ RθJA TJ TSTG 50 50 1.0 60 1.3 5.0 100 75 30 25 -55 to +150 -55 to +150 1.7 A V μA nS pF ℃/W ℃ ℃ Maximum Reverse Recovery Time(Note 1) Typical Junction Capacitance (Note2) Typical Thermal Resistance (Note3) Operating Temperature Range Storage Temperature Range NOTES: 1.Measured with IF=0.5A，IR=1A ，IRR=0.25A 2.Measured at 1.0 MHz and applied reverse voltage of 4.0V DC 3.Thermal resistance junction to ambient ~ 108 ~ RATING AND CHARACTERTIC CURVES HS2XA / UF2XA SERIES FIG. 1 – FORWARD CURRENT DERATING CURVE 3.0 AVERAGE FORWARD CURRENT AMPERES 2.5 2.0 1.5 1.0 0.5 0 25 50 75 100 125 150 175 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD FIG. 2 – MAXIMUM NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES 60 50 40 30 20 10 0 1 2 5 10 20 50 100 PULSE WIDTH 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) AMBIENT TEMPERATURE (℃) NUMBER OF CYCLES AT 60Hz FIG.3 – TYPICAL JUNCTION CAPACITANCE 100 INSTANTANEOUS FORWARD CURRENT, (A) HS2AA - HS2GA (UF2AA - UF2GA) FIG.4-TYPICAL FORWARD CHARACTERISTICS 10 HS2AA - HS2DA (UF2AA - UF2DA) CAPACITANCE, (pF) 1.0 10 HS2JA - HS2MA (UF2JA - UF2MA) HS2GA (UF2GA) 0.1 HS2JA - HS2MA (UF2JA - UF2MA) TJ = 25°C f = 1 MHz 1 1 4 10 100 T J = 25°C PULSE WIDTH 300us 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 REVERSE VOLTAGE ,VOLTS INSTANTANEOUS FORWARD VOLTAGE,VOLTS ~ 109 ~