MBR1080CT

MBR1030CT thru MBR10100CT SCHOTTKY BARRIER RECTIFIERS REVERSE VOLTAGE - 30 to 100Volts FORWARD CURRENT - 10.0 Amperes TO-220AB .108 (2.75) .413(10.5) .374(9.5) .153(3.9) .146(3.7) .187(4.7) .148(3.8) .055(1.4) .047(1.2) FEATURES ●Metal of silicon rectifier , majority carrier conduction ●Guard ring for transient protection ●Low power loss,high efficiency ●High current capability,low VF ●High surge capacity ●Plastic package has UL flammability .270(6.9) .230(5.8) .610(15.5) .583(14.8) classification 94V-0 ●For use in low voltage,high frequency inverters,free wheeling,and polarity protection applications MECHANICAL DATA ●Case: TO-220AB molded plastic ●Polarity: As marked on the body .051 (1.3) .043(1.1) .032(0.8) .102(2.6) .091(2.3) .157 .583(14.8) (4.0) .531(13.5) ●Weight: 0.08ounces,2.24 grams ●Mounting position :Any .024(0.6) .012(0.3) .126 (3.2) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current ( See Fig.1) Peak Forward Surge Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) Peak Forward Voltage (Note1) IF=5A @TJ=25℃ IF=5A @TJ=125℃ IF=10A @TJ=25℃ IF=10A @TJ=125℃ Maximum DC Reverse Current at Rated DC Bolcking Voltage @TJ=25℃ @TJ=125℃ SYMBOL VRRM VRMS VDC I(AV) MBR 1030CT 30 21 30 MBR 1040CT 40 28 40 MBR 1050CT 50 35 50 MBR 1060CT 60 42 60 MBR 1080CT 80 56 80 MBR 10100CT 100 70 100 UNIT V V V A 10.0 IFSM 0.70 VF 0.57 0.80 0.70 IR CJ RθJC TJ TSTG 170 3.0 125 0.80 0.65 0.90 0.75 0.1 15 220 300 3.0 -55 to +150 -55 to +175 0.85 0.75 0.95 0.85 A V mA pF ℃/W ℃ ℃ Typical Junction Capacitance (Note2) Typical Thermal Resistance (Note3) Operating Temperature Range Storage Temperature Range NOTES:1.300us pulse width,2% duty cycle. 2.Measured at 1.0 MHZ and applied reverse voltage of 4.0V DC. 3.Thermal resistance junction to case. ~ 244 ~ RATING AND CHARACTERTIC CURVES MBR1030CT thru MBR10100CT FIG. 2 – MAXIMUM NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES 300 250 200 150 100 50 0 1 2 10 20 50 5 NUMBER OF CYCLES AT 60Hz 100 PULSE WIDTH 8.3 ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) FIG. 1 – FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT AMPERES 10.0 8.0 6.0 4.0 2.0 0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 25 50 75 100 125 150 175 CASE TEMPERATURE (℃) FIG.3-TYPICAL REVER CHARACTERISTICS 1000 INSTANTANEOUS REVERSE CURRENT(mA) MBR1030CT - MBR1060CT MBR1080CT - MBR10100CT FIG.4-TYPICAL FORWARD CHARACTERISTICS 100 INSTANTANEOUS FORWARD CURRENT, (A) 100 MBR1030CT MBR1040CT 10 MBR1050CT MBR1060CT 10 T J=125℃ 1.0 T J=75℃ 1.0 MBR1080CT MBR10100CT T J = 25°C PULSE WIDTH 300us 2% DUTY CYCLE 0.1 T J=25℃ 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5 – TYPICAL JUNCTION CAPACITANCE 10000 T J = 25°C f = 1 MHz CAPACITANCE, (pF) 1000 MBR1080CT - MBR10100CT MBR1050CT - MBR1060CT MBR1030CT - MBR1040CT 100 0.1 1 4 10 REVERSE VOLTAGE ,VOLTS 100 ~ 245 ~