S2GA

S2AA thru S2MA SURFACE MOUNT GLASS PASSIVATED RECTIFIERS FEATURES ● Glass passivated chip ● For surface mounted applications ● Low reverse leakage current ● Low forward voltage drop ● High current capability ● Plastic material has UL flammability REVERSE VOLTAGE - 50 to 1000Volts FORWARD CURRENT - 2.0 Amperes SMA .062(1.60) .055(1.40) .114(2.90) .098(2.50) classification 94V-0 .181(4.60) .157(4.00) .012(.305) .006(.152) MECHANICAL DATA ●Case： Molded Plastic ●Polarity:Color band denotes cathode ●Weight: 0.002 ounces,0.053 grams ●Mounting position: Any .103(2.62) .079(2.00) .060(1.52) .030(0.76) .008(.203) .002(.051) .208(5.28) .188(4.80) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current Peak Forward Surge Current 8.3ms Single Half Sine-Wave Super Imposed On Rated Load (JEDEC Method) Maximum Forward Voltage at 2.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage Typical Junction Capacitance (Note1) Typical Thermal Resistance (Note2) Operating Temperature Range Storage Temperature Range @TJ=25℃ @TJ=125℃ @TL=100 ℃ SYMBOL VRRM VRMS VDC I(AV) S2AA 50 35 50 S2BA 100 70 100 S2DA 200 140 200 S2GA 400 280 400 2.0 S2JA 600 420 600 S2KA 800 560 800 S2MA 1000 700 1000 UNIT V V V A IFSM VF IR CJ RθJL TJ TSTG 70 1.1 5.0 125 20 20 -55 to +150 -55 to +150 A V μA pF ℃/W ℃ ℃ NOTES:1.Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. 2.Thermal resistance junction to lead. ~ 30 ~ RATING AND CHARACTERISTIC CURVES S2AA thru S2MA FIG. 1 – FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT AVERAGE FORWARD CURRENT (AMPERES) 3.0 2.5 2.0 1.5 1.0 0.5 0 25 50 75 100 125 150 175 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD FIG. 2 – MAXIMUM NON-REPETITIVE SURGE CURRENT 70 60 (AMPERES ) 50 40 30 20 10 0 1 2 5 10 20 50 100 PULSE WIDTH 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) LEAD TEMPERATURE ℃ NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL FORWARD CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, ( µA ) INSTANTANEOUS FORWARD CURENT,(A) 1000 FIG.4-TYPICAL REVERSE CHARACTERISTICS 10 T J=125°C 1.0 10 1.0 T J=25°C 0.1 0.1 T J=25°C PULSE WIDTH 300US 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0.01 0 20 40 60 80 100 120 140 INSTANTANEOUS FORWARD VOLTAGE,VOLTS PERCENT RATED PEAK REVERSE VOLTAGE,(%) ~ 31 ~