SF1606CT

SF1601CT thru SF1608CT SUPER FAST RECTIFIERS REVERSE VOLTAGE - 50 to 600Volts FORWARD CURRENT - 16.0 Amperes TO-220AB .108 (2.75) .413(10.5) .374(9.5) .153(3.9) .146(3.7) .187(4.7) .148(3.8) .055(1.4) .047(1.2) FEATURES ● Super fast switching time for high efficiency ● Low forward voltage drop High current capabiltiy ● Low reverse leakage current ● Plastic material has UL flammability .270(6.9) .230(5.8) .610(15.5) .583(14.8) classification 94V-0 MECHANICAL DATA ●Case: TO-220AB molded plastic ●Epoxy: UL94V-0 rate flame retadant ●Mounting position :Any ●Weight: 2.24 grams ●polarity:As marked .051 (1.3) .043(1.1) .032(0.8) .102(2.6) .091(2.3) .157 .583(14.8) (4.0) .531(13.5) .024(0.6) .012(0.3) .126 (3.2) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current Peak Forward Surge Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load(JEDEC Method) Peak Forward Voltage at 8.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @TJ=25℃ @TJ=100℃ @TA =75 ℃ SYMBOL VRRM VRMS VDC I(AV) SF 1601CT 50 35 50 SF 1602CT 100 70 100 SF 1603CT 150 105 150 SF 1604CT 200 140 200 16.0 SF 1605CT 300 210 300 SF 1606CT 400 280 400 SF 1608CT 600 420 600 UNIT V V V A IFSM VF IR TRR CJ RθJA TJ,TSTG 35 1.0 300 1.25 10 150 40 40 2.5 -55 to + 150 50 1.3 A V μA nS pF ℃/W ℃ Maximum Reverse Recovery Time(Note1) Typical Junction Capacitance (Note2) Typical Thermal Resistance (Note3) Operating and Storage Temperature Range NOTES:1.Measured with IF=0.5A,IR=1A,IRR=0.25A 2.Measured at 1.0 MHZ and applied reverse voltage of 4.0VDC. 3.Thermal resistance junction to ambient ~ 174 ~ RATING AND CHARACTERTIC CURVES SF1601CT thru SF1608CT FIG.1- TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT,(A) 20 1000 16 12 INSTANTANEOUS REVERSE CURRENT(uA) 8 4 0 SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD FIG.2-TYPICAL REVERSE CHARACTERISTICS TJ=100°C 100 0 50 100 150 AMBIENT TEMPERATURE ℃ 10 FIG.3-MAXIMUM NON-REPETITVE FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT,(A) 300 250 200 150 100 50 0 1 2 10 20 5 5 NUMBER OF CYCLES AT 60HZ 50 100 8.3 ms Single Half-Sine-Wave (JEDEC METOD) TJ=25°C 1.0 0.1 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE(%) FIG.4-TYPICAL INSTANTAEOUS FORWARD CHARACTERISTICS 40 INSTANTANEOUS FORWARD CURRENT,(A) 20 10 4 2 1.0 0.4 0.2 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE, (V) SF1605CT SF1606CT SF1601CT SF1604CT FIG.5-TYPICAL JUNCTION CAPACITANCE 200 100 SF1608CT JUNCTION CAPACITANCE(pF) 40 20 10 TJ=25°C T J=25°C PULSE WIDTH 300uS 1% DUTY CYCLE 4 2 1 0.1 0.2 0.4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE,(V) ~ 175 ~