SFF805

SFF801 thru SFF808 SUPER FAST RECTIFIERS REVERSE VOLTAGE - 50 to 600Volts FORWARD CURRENT - 8.0 Amperes ITO-220AC .138(3.5) .122(3.1) .118(3.0) .102(2.6) .189(4.8) .173(4.4) .118(3.0) .106(2.7) FEATURES ● Super fast switching time for high efficiency ● Low forward voltage drop High current capabiltiy ● Low reverse leakage current ● Plastic material has UL flammability .406(10.3) .386(9.8) classification 94V-0 MECHANICAL DATA ●Case: ITO-220AC molded plastic ●Epoxy: UL94V-0 rate flame retadant ●Mounting position :Any ●Weight: 2.24 grams .04 MAX (1.0) .610(15.5) .571(14.5) .157(4.0) .142(3.6) .059(1.5) .043(1.1) .030(0.76) .020(0.51) .112(2.84) .088(2.24) .571(14.5) .531(13.5) .114(2.9) .098(2.5) .030(0.76) .020(0.51) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current Peak Forward Surge Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load(JEDEC Method) Peak Instantaneous Forward Voltage at 8.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @TJ=25℃ @TJ=100℃ @TA =75 ℃ SYMBOL SFF801 VRRM VRMS VDC I(AV) 50 35 50 SFF802 100 70 100 SFF803 150 105 150 SFF804 200 140 200 8.0 SFF805 300 210 300 SFF806 400 280 400 SFF808 600 420 600 UNIT V V V A IFSM VF IR TRR CJ RθJA TJ,TSTG 35 1.0 300 1.25 10 150 40 40 5 -55 to + 150 50 1.3 A V μA nS pF ℃/W ℃ Maximum Reverse Recovery Time(Note1) Typical Junction Capacitance (Note2) Typical Thermal Resistance (Note3) Operating and Storage Temperature Range NOTES:1.Measured with IF=0.5A,IR=1A,IRR=0.25A 2.Measured at 1.0 MHZ and applied reverse voltage of 4.0V DC. 3.Thermal resistance junction to ambient ~ 168 ~ RATING AND CHARACTERTIC CURVES SFF801 thru SFF808 FIG.1- TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT,(A) 10 1000 8 6 4 2 0 INSTANTANEOUS REVERSE CURRENT(uA) SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD FIG.2-TYPICAL REVERSE CHARACTERISTICS TJ=100°C 100 0 50 100 150 AMBIENT TEMPERATURE ℃ 10 FIG.3-MAXIMUM NON-REPETITVE FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT,(A) 350 300 250 200 150 100 0 50 1 8.3 ms Single Half-Sine-Wave (JEDEC METOD) 2 10 20 5 5 NUMBER OF CYCLES AT 60HZ 50 100 TJ=25°C 1.0 0.1 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE(%) FIG.4-TYPICAL INSTANTAEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT,(A) 40 20 10 4 2 SFF805 - SFF806 SFF801 SFF804 FIG.5-TYPICAL JUNCTION CAPACITANCE 200 100 SFF808 JUNCTION CAPACITANCE(pF) 40 20 10 TJ=25°C 1.0 0.4 0.2 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE, (V) T J=25°C PULSE WIDTH 300uS 1% DUTY CYCLE 4 2 1 0.1 0.2 0.4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE,(V) ~ 169 ~