SR16150CT

SR1630CT thru SR16150CT SCHOTTKY BARRIER RECTIFIERS REVERSE VOLTAGE - 30 to 150Volts FORWARD CURRENT - 16.0 Amperes TO-220AB .108 (2.75) .413(10.5) .374(9.5) .153(3.9) .146(3.7) .187(4.7) .148(3.8) .055(1.4) .047(1.2) FEATURES ●Metal of silicon rectifier , majority carrier conduction ●Guard ring for transient protection ●Low power loss,high efficiency ●High current capability,low VF ●High surge capacity ●Plastic package has UL flammability .270(6.9) .230(5.8) .610(15.5) .583(14.8) classification 94V-0 ●For use in low voltage,high frequency inverters,free wheeling,and polarity protection applications MECHANICAL DATA ●Case: TO-220ABmolded plastic ●Polarity: As marked on the body .051 (1.3) .043(1.1) .032(0.8) .102(2.6) .091(2.3) .157 .583(14.8) (4.0) .531(13.5) ●Weight: 0.08ounces,2.24 grams ●Mounting position :Any .024(0.6) .012(0.3) .126 (3.2) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current ( See Fig.1) Peak Forward Surage Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) Peak Forward Voltage at 8.0A DC(Note1) Maximum DC Reverse Current at Rated DC Bolcking Voltage @TJ=25℃ @TJ=100℃ @TC=95 ℃ SYMBOL VRRM VRMS VDC I(AV) SR 1630CT 30 21 30 SR 1640CT 40 28 40 SR 1650CT 50 35 50 SR 1660CT 60 42 60 16 SR SR SR 1680CT 16100CT 16150CT 80 56 80 100 70 100 150 105 150 UNIT V V V A IFSM VF IR CJ RθJC TJ TSTG 0.55 0.60 0.70 150 0.85 1.0 50 350 2.5 -55 to +150 -55 to +150 0.85 0.95 A V mA pF ℃/W ℃ ℃ Typical Junction Capacitance (Note2) Typical Thermal Resistance (Note3) Operating Temperature Range Storage Temperature Range NOTES:1.300us pulse width,2% dudy cycle. 2.Measured at 1.0 MHZ and applied reverse voltage of 4.0V DC. 3.Thermal resistance junction to case. ~ 183 ~ RATING AND CHARACTERTIC CURVES SR1630CT thru SR16150CT FIG. 1 – FORWARD CURRENT DERATING CURVE 16 AVERAGE FORWARD CURRENT AMPERES PEAK FORWARD SURGE CURRENT, AMPERES FIG. 2 – MAXIMUM NON-REPETITIVE SURGE CURRENT 150 125 100 75 50 25 0 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz FIG.4-TYPICAL FORWARD CHARACTERISTICS FIG.3-TYPICAL REVER CHARACTERISTICS 1000 INSTANTANEOUS REVERSE CURRENT,(mA) INSTANTANEOUS FORWARD CURRENT, (A) SR1640CT PULSE WIDTH 8.3 ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 12 8 SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVELOAD 4 0 25 50 75 100 125 150 175 CASE TEMPERATURE (℃) 100 SR1630CT 100 10 SR1650CT -SR1660CT SR16150CT 10 T J=100℃ 1.0 T J=75℃ SR1680CT -SR16100CT 1.0 T J = 25°C PULSE WIDTH 300us 2% DUTY CYCLE T J=25℃ 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.3 – TYPICAL JUNCTION CAPACITANCE 1000 CAPACITANCE, (pF) 100 T J = 25°C f = 1 MHz 10 0.1 10 1 REVERSE VOLTAGE ,VOLTS 100 ~ 184 ~